Sharp AR-164 AR-164 Operation Manual

Sharp AR-164 Manual

Get Sharp AR-164 PDF manuals and user guides View all Sharp AR-164 manuals
Add to My Manuals
Save this manual to your list of manuals

Sharp AR-164 manual content summary:

  • Sharp AR-164 | AR-164 Operation Manual - Page 1
    MODEL AR-164 DIGITAL LASER COPIER/PRINTER OPERATION MANUAL Page • GETTING STARTED 2 • MAKING COPIES 13 • SPECIAL FEATURES 28 • STATUS INDICATORS 38 • GENERAL INFORMATION 46 • OPTIONAL EQUIPMENT 65
  • Sharp AR-164 | AR-164 Operation Manual - Page 2
    protect against loss or theft, record and retain for reference the copier's serial number located on the back of the unit. Model Number AR-164 Serial Number Date of Purchase Place of Purchase Authorized Sharp Copier Service Department Number CAUTIONS Follow the cautions below when using this
  • Sharp AR-164 | AR-164 Operation Manual - Page 3
    G TONER CARTRIDGE REPLACEMENT 38 G MISFEED REMOVAL 40 G DEVELOPER REQUIRED 45 G MAINTENANCE REQUIRED 45 GENERAL INFORMATION G USER PROGRAMS 46 - Settings for auditing accounts 49 G POWER SAVE MODES 53 G USER MAINTENANCE 55 G COPIER TROUBLE 57 G SUPPLIES 60 - Types and sizes of copy
  • Sharp AR-164 | AR-164 Operation Manual - Page 4
    To get full use of all copier features, be sure to familiarize yourself with this manual and the copier. For quick reference during copier use, keep this manual in a handy location. This copier can be used as a laser printer and as a facsimile machine by installing optional components. However, this
  • Sharp AR-164 | AR-164 Operation Manual - Page 5
    IN 1 copying G Toner save mode reduces toner consumption by approximately 10%. G User programs allow setting/modification of functions for customer needs. Also the user programs allow the internal auditor to be controlled. Optional features G This copier can be used as a laser printer by installing
  • Sharp AR-164 | AR-164 Operation Manual - Page 6
    Open to remove misfeeds and for copier servicing. Paper tray Holds 250 sheets of copy paper. Side cover Open to remove misfeeds and to service the copier. Side cover handle Lift and pull to open the side cover. Bypass tray guides Adjust to the width of the copy paper. Bypass tray Paper including
  • Sharp AR-164 | AR-164 Operation Manual - Page 7
    misfed originals. Exit area Finished originals are output here. Toner cartridge lock release lever Use to unlock the toner cartridge. Toner cartridge Contains toner. Photoconductive drum Copy images are formed on the photoconductive drum. Roller rotating knob Turn to remove misfed paper. Fusing
  • Sharp AR-164 | AR-164 Operation Manual - Page 8
    (p. 15) Use to adjust the MANUAL or PHOTO exposure level. Numeric keys Use to select the desired copy quantity or to make user program entries. Zero key Use as part of numeric keys to enter copy quantity. Press during a continuous copy run to display the number of copies completed in the current run
  • Sharp AR-164 | AR-164 Operation Manual - Page 9
    minute* after the last copy is made in any mode. G Copy ratio: 100% G Exposure: Automatic G Copy quantity: 0 G All special copier modes: Off G Auto paper selection: On G Paper feed station: Previously selected paper tray * This time (auto clear time) can be changed. See page 46, USER PROGRAMS. 7
  • Sharp AR-164 | AR-164 Operation Manual - Page 10
    copier. Operation in this condition will cause poor copy quality and malfunctions. Leave the copier at room temperature for at least 2 hours before use. Do not install your copier the machine for servicing and proper ventilation. 4" (10 cm) A small amount of ozone is produced within the copier
  • Sharp AR-164 | AR-164 Operation Manual - Page 11
    copier. Do not drop the copier, subject it to shock or strike it against any object. Store spare toner cartridges in a cool dry place without removing from the package before use. If they are exposed to direct sunlight or excessive heat, poor copies may result. Do not touch the photoconductive drum
  • Sharp AR-164 | AR-164 Operation Manual - Page 12
    tray, the size of the paper must be entered by steps 8 through 11 on page 12. If not, the edges of copies may become smudged with toner. Also, the AUTO PAPER SELECT and the AUTO IMAGE features will not function properly. 1 Gently lift and pull out the paper tray until it stops. Loading
  • Sharp AR-164 | AR-164 Operation Manual - Page 13
    , store the left guide in the slot at the left front of the paper tray. 5 Load copy paper into the tray. 6 Place the appropriate label to indicate the selected paper size into the recess on the right front side of the paper tray. 7 Push the paper tray firmly back into the copier. 11
  • Sharp AR-164 | AR-164 Operation Manual - Page 14
    the START key indicator will go out. For paper size setting, ensure that the COPY mode has been selected. However, if copying, printing or facsimile printing is being performed, paper size setting cannot be made even in the COPY mode. See Note on page 58. 9 Use the TRAY SELECT key to select the
  • Sharp AR-164 | AR-164 Operation Manual - Page 15
    in the auditing mode, it will not function until an assigned 3-digit account number has been entered. See page 49 for setting the auditing mode. If the copier has been programmed in the auditing mode, "- - - " will appear in the copy quantity display in the initial conditions. 1 Enter your account
  • Sharp AR-164 | AR-164 Operation Manual - Page 16
    and press the START key during warm-up. Copying will start after warm-up. G If the copier has been programmed in the auditing mode, the START key indicator will not light up and "--- " will appear in the copy quantity display. Enter an assigned 3-digit account number. See page 13. G If the power is
  • Sharp AR-164 | AR-164 Operation Manual - Page 17
    from - AUTOMATIC, MANUAL, and PHOTO. G Automatic exposure is the standard initial setting for this copier. In this mode, the characteristics of the original are "read" by the exposure system and adjustments are automatically made. This optimizes the contrast of the copied images by reducing the
  • Sharp AR-164 | AR-164 Operation Manual - Page 18
    and press the START key during warm-up. Copying will start after warm-up. G If the copier has been programmed in the auditing mode, the START key indicator will not light up and "--- " will appear in the copy quantity display. Enter an assigned 3-digit account number. See page 13. G If the power is
  • Sharp AR-164 | AR-164 Operation Manual - Page 19
    is made. 7 Press the START key. G The number in the copy quantity display will decrease by 1 each time a copy is made. G Press the CLEAR key to stop copying in the middle of a run. G To repeat the same copy sequence for a different original, simply replace the original and press the START key. G If
  • Sharp AR-164 | AR-164 Operation Manual - Page 20
    IMAGE key. G The copy ratio will be automatically set. G If a PRESET RATIO indicator is blinking, part of the original image may not be copied. If user program number of copies. 6 Press the START key. G To cancel the automatic reduction/enlargement mode, press the AUTO IMAGE key again. G When copying
  • Sharp AR-164 | AR-164 Operation Manual - Page 21
    on the original size and copy ratio. If the selected PRESET RATIO indicator or the ZOOM indicator blinks, the selected copy image is too large for the copy paper size. The desired paper tray can also be selected by pressing the TRAY SELECT key. 4 Set the number of copies and press the START key
  • Sharp AR-164 | AR-164 Operation Manual - Page 22
    paper is not at least as large as the original image. 1 Unfold the bypass tray. G When feeding 8-1/2" x 14" or 11" x 17" sized paper, extend the feeder tray. 2 Set the paper guides to the copy paper width. 3 Insert the copy paper (print face down) all the way into the bypass tray. G Up to 100 sheets
  • Sharp AR-164 | AR-164 Operation Manual - Page 23
    MAKING COPIES Bypass feed (special paper) BYPASS FEED (special paper) 4 Press the TRAY SELECT key to select the bypass tray. 5 Leave the copy quantity at 0 if using special papers. Set the number of copies if using standard copy paper or envelopes. 6 Press the START key. 21
  • Sharp AR-164 | AR-164 Operation Manual - Page 24
    MAKING COPIES Two-sided copying TWO-SIDED COPYING Two-sided copies can be made on this copier using the bypass tray. 1 Place the first original on the original table and make a copy. G The first copy can be made using any of the paper feed stations. 2 Replace the first original with the second
  • Sharp AR-164 | AR-164 Operation Manual - Page 25
    the offset stack mode is enabled using user program No. 19, each copy will be offset by approximately 1 inch (25 mm). When copying in the sort mode, each collated set of copies will be stacked offset from the previous set. When copying in the group mode, copies will be offset and stacked in groups
  • Sharp AR-164 | AR-164 Operation Manual - Page 26
    such as photographs, the number of originals which can be scanned will be less.) When the memory becomes full of scanned original image data, the ORIGINAL DATA indicator will blink. When the ORIGINAL DATA indicator blinks, the copier will stop scanning. To start copying of scanned originals, press
  • Sharp AR-164 | AR-164 Operation Manual - Page 27
    stops, remove the original(s) and set the original(s) for interrupt copying. 3 Select the desired available copier functions. 4 Set the number of copies. 5 Press the START key. G The interrupt copies will be offset from the previous copies when user program No. 19 is enabled. See page 46. 6 When all
  • Sharp AR-164 | AR-164 Operation Manual - Page 28
    be adjusted to suit your copying needs. This level is set for copying from the original table and copying from the SPF respectively. key to lighten or darken the automatic exposure level as desired. 4 Press the AUTO/MANUAL/PHOTO key. G The AUTO indicator will stop blinking and will light up steadily.
  • Sharp AR-164 | AR-164 Operation Manual - Page 29
    MAKING COPIES Toner save mode TONER SAVE MODE This mode reduces toner consumption by approximately 10% in the automatic and manual exposure modes. Copies will be lighter but still adequate for general use. Selection of this mode does not affect the PHOTO mode. Follow the procedure below for
  • Sharp AR-164 | AR-164 Operation Manual - Page 30
    independently. This feature cannot be used with the 2 in 1 or 4 in 1 feature. To use the XY ZOOM feature with the DUAL PAGE COPY feature, set the DUAL PAGE COPY feature first and then the XY ZOOM feature. (Enlargement cannot be set.) SPECIAL FEATURES XY zoom 1 Place the original in the document
  • Sharp AR-164 | AR-164 Operation Manual - Page 31
    ratios. If desired, another paper tray can be selected by pressing the TRAY SELECT key. 8 Set the number of copies. 9 Press the START key. G To change the copy ratios again, press a PRESET RATIO selector ( , ) key or a zoom ( , ) key. Then, perform step 3 and the succeeding steps. G To cancel this
  • Sharp AR-164 | AR-164 Operation Manual - Page 32
    be selected. Even if this feature is canceled, the MANUAL mode will not automatically be canceled. 1 Place the original in the document feeder tray or on the original table. 2 Press the B/W REVERSE key. SPECIAL FEATURES B/W reverse 3 Check the copy paper size. G If an optional paper feed unit is
  • Sharp AR-164 | AR-164 Operation Manual - Page 33
    with the 2 in 1 or 4 in 1 feature and sort/group feature. If the AUTO IMAGE feature has been selected, this feature cannot be selected. To use the DUAL PAGE COPY feature with the XY ZOOM feature, set the DUAL PAGE COPY feature first and then the XY ZOOM feature. (Enlargement cannot be set.) 1 Place
  • Sharp AR-164 | AR-164 Operation Manual - Page 34
    the orientation of the original does not match that of the copy paper. Rotation copying will function only if the AUTO PAPER SELECT mode or AUTO IMAGE mode has been selected. Even if user program No. 7 is not set, rotation copying will function when the 2 in 1 or 4 in 1 function is selected. See
  • Sharp AR-164 | AR-164 Operation Manual - Page 35
    copies can be selected by user programs. There are two patterns of layout for 2 in 1 copying and four patterns of layout for 4 in 1 copying. See user program selected layout pattern number will blink in the copy quantity display. To confirm or set the layout pattern for 4 in 1 copying, use the 2
  • Sharp AR-164 | AR-164 Operation Manual - Page 36
    ratio will be calculated automatically. If the calculated copy ratio is less than 50%, part of original image may not be copied because the smallest copy ratio is 50%. 7 Set the number of copies. 8 Press the START key. G Copying will start after the originals have been scanned. Up to 30 sheets of
  • Sharp AR-164 | AR-164 Operation Manual - Page 37
    AB This copier has an edge erase mode and a center erase mode. G Edge erase can be used to eliminate shadow lines around the edges of copies caused edges of copies and to eliminate the shadow at the center of copies. G The erase width can be set from 0" to 1" in five steps using user program No.
  • Sharp AR-164 | AR-164 Operation Manual - Page 38
    SPECIAL FEATURES Erase ERASE 4 Set the number of copies. 5 Press the START key. 36
  • Sharp AR-164 | AR-164 Operation Manual - Page 39
    image to the right to increase the left margin by approximately 1/4". G This feature cannot be used with the 2 in 1 or 4 in 1 feature. Expanded margin Margin is expanded here. 1 Place the original in the document feeder tray or on the original table. G When copying Check the copy paper size. G
  • Sharp AR-164 | AR-164 Operation Manual - Page 40
    , the toner cartridge must be replaced before copying can be resumed. Replace the toner cartridge by following the procedure below. For best copying results, be sure to use only SHARP Genuine Supplies which are designed, engineered and tested to maximize the life and performance of SHARP copiers
  • Sharp AR-164 | AR-164 Operation Manual - Page 41
    sufficiently fed). In this case, open and close the side cover. The copier will feed toner again approximately 2 minutes and then copying can be restarted. Toner cartridge life To find out the approximate quantity of toner remaining, follow the procedure below. 1 Press and hold the light ( ) key for
  • Sharp AR-164 | AR-164 Operation Manual - Page 42
    torn during removal, be sure to remove all pieces. Be careful not to damage the photoconductive drum. For misfeeds in optional equipment, see their section of the operation manual. First confirm the misfeed location. ( P. 40) ( P. 41, 44) ( P. 68) STATUS INDICATORS Misfeed removal A C Location
  • Sharp AR-164 | AR-164 Operation Manual - Page 43
    misfed original cannot be easily removed from the exit area, open the front part of the document feeder tray to remove the original. 4 Open and close . After misfed originals are removed, a number may appear in the copy quantity display, indicating the number of originals that must be returned to
  • Sharp AR-164 | AR-164 Operation Manual - Page 44
    the misfeed location. Remove the misfed paper following the instructions for each location in the illustration below. If paper. Do not touch the photoconductive drum (green portion) when removing the misfed paper. Doing so may damage the drum and cause smudges on copies. 3 Close the front cover by
  • Sharp AR-164 | AR-164 Operation Manual - Page 45
    fusing unit is hot. Take care in removing paper. G Do not touch the photoconductive drum (green portion) when removing the misfed paper. Doing so may damage the drum and cause smudges on copies. G Be careful about unfixed toner on the misfed paper not to soil your hands or clothes. 4 Close the front
  • Sharp AR-164 | AR-164 Operation Manual - Page 46
    MISFEED REMOVAL 3 Close the side cover by pressing the handle on the cover. G The misfeed ( ) indicator will go out. Misfeed in the paper tray Before opening the paper tray, be sure to open the bypass tray, lift slightly on the side cover and slide the cover out until it stops, and then perform
  • Sharp AR-164 | AR-164 Operation Manual - Page 47
    lights up, the developer should be replaced. DEVELOPER REPLACEMENT SHOULD ONLY BE DONE BY AN AUTHORIZED SHARP SERVICE TECHNICIAN. Contact your service center as soon as possible. MAINTENANCE REQUIRED When the indicator lights up, service by an authorized SHARP service technician is required
  • Sharp AR-164 | AR-164 Operation Manual - Page 48
    programs This copier has the following user programs. Program No. Program name Description 1 Auto clear time Sets the auto clear time. The copier returns to the initial settings when the auto clear time elapses after the last copy is made. 2 Preheat mode Sets the time that elapses before
  • Sharp AR-164 | AR-164 Operation Manual - Page 49
    the copy quantity display and the currently selected parameter number for the program will blink on the right side. G For programs 10 to 15 (programs for auditing accounts), the display varies with the program number. See page 49 for setting programs 10 to 15. 47 User programs GENERAL INFORMATION
  • Sharp AR-164 | AR-164 Operation Manual - Page 50
    function will be disabled. 5 Press the START key. G The right-hand number in the copy quantity display will be steadily lit and the entered value will be stored. User programs GENERAL INFORMATION 6 To continue with other user programs, press the key and then repeat steps 2 to 5. To exit the
  • Sharp AR-164 | AR-164 Operation Manual - Page 51
    Then follow the appropriate instructions for the program. USER PROGRAMS Program No. 10: Auditing mode If the auditing mode is enabled, copying is limited to operators with an assigned 3-digit account number. A maximum of 20, 3-digit account numbers can be assigned. Use program No. 11 to register
  • Sharp AR-164 | AR-164 Operation Manual - Page 52
    will blink in the copy quantity display. 5. Repeat steps 1 to 4 for other account numbers. 6. To continue with other user programs, press the key and enter another program number. To exit the user program mode, press the light ( ) key. Program No. 13: Account number deletion Program No. 13 is used
  • Sharp AR-164 | AR-164 Operation Manual - Page 53
    ,999. If the number of copies made reaches 50,000, the number will be reset to 0 and counting will start again from 0. 3. Repeat steps 1 and 2 for other account numbers. 4. To continue with other user programs, press the key and select another program number. To exit the user program mode, press the
  • Sharp AR-164 | AR-164 Operation Manual - Page 54
    select the account number to be reset. G Use the key to advance through the account numbers. 4. Press the START key. G The number of copies against the specified account number will be reset. 5. To continue with other user programs, enter another program number. To exit the user program mode, press
  • Sharp AR-164 | AR-164 Operation Manual - Page 55
    using user programs. It is suggested that you set appropriate times according to the actual usage of the copier. See page 46. Preheat mode When the copier enters to warm up before copying can begin. Power save modes GENERAL INFORMATION As an ENERGY STAR® Partner, SHARP has determined that this
  • Sharp AR-164 | AR-164 Operation Manual - Page 56
    SAVE MODES Setting the power save modes The time that elapses before the copier enters a power save mode after any operation is made can be set manually. This time is set with user program No. 2 for the preheat mode and user program No. 3 for the auto power shut-off mode. For these settings, see
  • Sharp AR-164 | AR-164 Operation Manual - Page 57
    USER MAINTENANCE Proper care is essential for clean, sharp copies. Please take a few minutes to regularly clean your copier. Original table and platen cover Stains or dirt on the original table or platen cover will also be copied. Wipe the original table and platen cover with a soft, clean cloth. G
  • Sharp AR-164 | AR-164 Operation Manual - Page 58
    USER MAINTENANCE User maintenance GENERAL INFORMATION Transfer charger cleaning If copies start becoming streaky or blotchy, the . If the cleaner is stopped on the way, smudges on copies may occur. G If the white sheet metal is smudged with toner, wipe it with a soft, clean cloth. 5 Return the
  • Sharp AR-164 | AR-164 Operation Manual - Page 59
    COPIER TROUBLE? Problem G Copier plugged in? Copier does not operate. G Power switch ON? Solution Plug the copier into a grounded outlet. See page 8. Turn the power switch ON. See page 14. Copies are too dark or too light. G Copy density properly adjusted? See pages 14 and 26. Blank copies
  • Sharp AR-164 | AR-164 Operation Manual - Page 60
    COPIER TROUBLE? Problem Solution G Original table or document feeder cover dirty? Clean regularly. See page 55. Copies are smudged or dirty. G Original smudged or blotchy? G Is the indicator on? Use a clean original. Developer is required. Contact your SHARP service center as soon as possible
  • Sharp AR-164 | AR-164 Operation Manual - Page 61
    COPIER TROUBLE? Problem Solution G Is blinking in the copy quantity display? A toner cartridge is not installed. Install a toner cartridge. If "CH" is blinking even if a cartridge is installed properly, contact your SHARP service center immediately. Power is on but copying is not possible. G
  • Sharp AR-164 | AR-164 Operation Manual - Page 62
    SUPPLIES Types and sizes of copy paper Paper tray Bypass tray Size 5-1/2" x 8-1/2"* to 11" x 17" Ordinary paper: 5-1/2" x 8-1/2" materials. These will cause physical damage to the copier. G For best results, use only paper recommended by SHARP. G Special papers except envelopes must be fed one
  • Sharp AR-164 | AR-164 Operation Manual - Page 63
    SUPPLIES Genuine supplies statement Standard supplies for this copier that are to be replaced by the user are copy paper and toner cartridge. For best copying results, be sure to use only SHARP Genuine Supplies which are designed, engineered and tested to maximize the life and performance of SHARP
  • Sharp AR-164 | AR-164 Operation Manual - Page 64
    SPECIFICATIONS 62 Type Copy system Originals Original sizes Copy sizes Copying speed (at 100% copy ratio) Continuous copy First-copy time Warm-up time Copy ratio Exposure system Copy paper feed Fusing system Developer system Light source Resolution Gradation Power supply Power consumption Desktop
  • Sharp AR-164 | AR-164 Operation Manual - Page 65
    11"R, 8-1/2" x 14", 11" x 17" First-copy time may differ depending on operating conditions, such as power-supply voltage and room temperature. As a part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior
  • Sharp AR-164 | AR-164 Operation Manual - Page 66
    MEMO 64 GENERAL INFORMATION
  • Sharp AR-164 | AR-164 Operation Manual - Page 67
    OPTIONAL EQUIPMENT CONTENTS Page G SYSTEM CONFIGURATION 66 G 250-SHEET PAPER FEED UNIT (AR-DE5)/ 2x250-SHEET PAPER FEED UNIT (AR-DE6 67 G Loading copy paper 67 G Misfeed removal 68 G Specifications 69 65 OPTIONAL EQUIPMENT
  • Sharp AR-164 | AR-164 Operation Manual - Page 68
    the following. Facsimile expansion kit (AR-FX2)* Printer expansion kit (AR-PB8)* PS2 expansion kit (AR-PS1)* LCD panel kit (AR-PA1)* Job separator tray kit (AR-TR2)* Print server card (AR-NC3D)* * These options are not used for the copier operation. System configuration OPTIONAL EQUIPMENT 250
  • Sharp AR-164 | AR-164 Operation Manual - Page 69
    convenience of increased paper capacity for the copier and a greater choice of paper sizes readily available for copying. The AR-DE5 contains one 250-sheet paper tray and the AR-DE6 contains two 250-sheet paper trays. PART NAMES 250-sheet paper feed unit AR-DE5 Side cover 2 x 250-sheet paper feed
  • Sharp AR-164 | AR-164 Operation Manual - Page 70
    250-SHEET PAPER FEED UNIT (AR-DE5)/2x250-SHEET PAPER FEED UNIT (AR-DE6) Misfeed removal The copier will stop when a misfeed occurs. The misfeed ( ) indicator and the red indicator that the misfeed ( ) indicator has gone out. 68 250-sheet paper feed unit (AR-DE5) OPTIONAL 2x250-sheet paper feed unit
  • Sharp AR-164 | AR-164 Operation Manual - Page 71
    the copier AR-DE6 Copy paper size Paper weight Paper capacity Weight Dimensions Power supply copier As a part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification
  • Sharp AR-164 | AR-164 Operation Manual - Page 72
    20 C Cautions on handling 9 Copier trouble 57 Copying - normal 14 - reduction/enlargement 18 - through bypass tray 20 - two-sided 22 Copy paper 10, 60 Copy quantity 15 Copy ratio 18 D Dark key 15 Developer replacement required indicator 45 Dual page copy 31 E Enlargement 18 Erase 35
  • Sharp AR-164 | AR-164 Operation Manual - Page 73
    paper 20 Specifications - copier 62 - paper 60 SPF 14 Status indicators 38 Storage of supply 61 Stream feeding mode 14 T Toner cartridge life 39 Toner cartridge replacement 38 Toner save mode 27 Total output count 6 Troubleshooting 57 Two-sided copying 22 U User maintenance - bypass
  • Sharp AR-164 | AR-164 Operation Manual - Page 74
    AR-201NT/T/FT/ST (Black Toner) Date Issued: Nov. 1, 2000 MSDS No. F-00991 Section 2. Supplier's Name and Address Sharp tests performed using toner. When used as intended according to instructions, studies do The classification is based upon the development of lung tumors in rats receiving
  • Sharp AR-164 | AR-164 Operation Manual - Page 75
    Evaporation Rate: Not applicable Appearance: Fine powder Odor: Odorless Specific Gravity: 1.1 Solubility in Water: Negligible PH: Not Use of a dust mask is recommended when handling a large quantity of toner or during long term exposure, as with any non-toxic dust. Engineering Control
  • Sharp AR-164 | AR-164 Operation Manual - Page 76
    Product AR-201ND/DV/SD (Black Developer) Date Issued: Nov. 1, 2000 MSDS No. F-30991 Section 2. Supplier's Name and Address Sharp Corporation LDL0 of this toner which is included in this developer is over 2,000mg/kg. Mutagenicity The toner, which is included in this developer, has been tested
  • Sharp AR-164 | AR-164 Operation Manual - Page 77
    Not applicable Appearance: Fine powder Odor: Odorless Specific Gravity: about 7.3 Solubility in Water: Negligible PH Morrow, U. Mohr, S. Takenaka, and R. Mermelstein (1991) Pulmonary Response to Toner upon Chronic Inhalation Exposure in Rats. Fundamental and Applied Toxicology 17, pp. 280-
  • Sharp AR-164 | AR-164 Operation Manual - Page 78
    MEMO
  • Sharp AR-164 | AR-164 Operation Manual - Page 79
    behalf of Sharp. Specifically, SHARP DOES NOT EXTEND TO YOU, THE END-USER, ANY AR-164 Digital Laser Copier/Printer In the event that this authorized dealer does not honor its warranty commitments, please contact the General Manager, Business Products Group, Sharp Electronics Corporation, Sharp
  • Sharp AR-164 | AR-164 Operation Manual - Page 80
    AR-164 SHARP ELECTRONICS CORPORATION Sharp Plaza, Mahwah, New Jersey 07430-2135. www.sharp-usa.com SHARP CORPORATION PRINTED IN CHINA 2002B KS TINSE0000QSZZ
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
•
GETTING STARTED
•
MAKING COPIES
•
SPECIAL FEATURES
•
STATUS INDICATORS
•
GENERAL INFORMATION
•
OPTIONAL EQUIPMENT
2
13
28
38
46
65
DIGITAL LASER
COPIER/PRINTER
OPERATION MANUAL
MODEL
AR-164
Page