Sharp AR-C360P AR-C360P EFI Configuration Guide

Sharp AR-C360P Manual

Get Sharp AR-C360P PDF manuals and user guides View all Sharp AR-C360P manuals
Add to My Manuals
Save this manual to your list of manuals

Sharp AR-C360P manual content summary:

  • Sharp AR-C360P | AR-C360P EFI Configuration Guide - Page 1
  • Sharp AR-C360P | AR-C360P EFI Configuration Guide - Page 2
    Copyright Sharp AR-C360P EFI Configuration Guide P/N 59379201, Revision 1.1 September, 2005 Every effort has been made to ensure that the information in this document is complete, accurate, and up-to-date. Sharp assumes no responsibility for the results of errors beyond its control. Sharp also
  • Sharp AR-C360P | AR-C360P EFI Configuration Guide - Page 3
    combination with the products, or software of Electronics for Imaging, Inc. þPANTONE Color Data and/or Software shall not be copied onto not installed and used in accordance with the instructions, may cause harmful interference to radio communications. . Sharp AR-C360P EFI Configuration Guide - 3
  • Sharp AR-C360P | AR-C360P EFI Configuration Guide - Page 4
    versions, component parts, the media and printed materials, and this Agreement); (3) you retain no copies of the Software and Documentation, including copies stored on a computer; and (4) the recipient agrees to the terms and conditions of this Agreement. Sharp AR-C360P EFI Configuration Guide - 4
  • Sharp AR-C360P | AR-C360P EFI Configuration Guide - Page 5
    OF THE POSSIBILITY OF SUCH DAMAGE. YOU ACKNOWLEDGE THAT THE PRICE OF THE PRODUCT REFLECTS THIS ALLOCATION OF RISK. BECAUSE , export, or re-export any portion of the Product or the Software in any form in violation of any applicable laws or regulations of Sharp AR-C360P EFI Configuration Guide - 5
  • Sharp AR-C360P | AR-C360P EFI Configuration Guide - Page 6
    agreement held between us and supersedes any other communications or advertising with respect to the Software. If any provision of this Agreement is held invalid, such provision shall be deemed . Electronics for Imaging 303 Velocity Way Foster City, CA 94404 Sharp AR-C360P EFI Configuration Guide - 6
  • Sharp AR-C360P | AR-C360P EFI Configuration Guide - Page 7
    Fiery on a network with UNIX workstations Tips for experts-UNIX workstations Important note about the remote printer name Setting up the Fiery on TCP/IP networks Managing print jobs Sharp AR-C360P EFI Configuration Guide - 7 13 1-14 1-15 1-17 1-24 1-24 1-24 2-26 2-27 2-34 2-35 2-35 2-36 2-40 2-41
  • Sharp AR-C360P | AR-C360P EFI Configuration Guide - Page 8
    options Service Setup options Printer Setup options PostScript Setup options PCL Setup options Color Setup options Administrative functions in the Setup menu Job Log Setup 4-64 4-66 4-69 4-70 4-80 4-98 4-100 4-102 4-104 4-109 4-110 Chapter 5: Setting up the Fiery from a Windows Sharp AR-C360P EFI
  • Sharp AR-C360P | AR-C360P EFI Configuration Guide - Page 9
    Setup Network Setup Adapters/Ports Protocols Services Windows print sharing with Server Message Block (SMB) Printer Setup options Printer connections PS (PostScript) Setup Setting 5-142 5-143 6-144 6-145 6-145 7-147 7-149 7-149 7-151 7-152 7-153 7-155 7-156 Sharp AR-C360P EFI Configuration Guide - 9
  • Sharp AR-C360P | AR-C360P EFI Configuration Guide - Page 10
    AR-C360P 7-158 Shutting down and rebooting the printing unit 7-158 Restarting the Fiery 7-158 Appendix A:Troubleshooting Troubleshooting the Fiery Troubleshooting during Setup from the Control Panel Runtime error messages A-160 A-160 A-167 Index 171 Sharp AR-C360P EFI Configuration Guide
  • Sharp AR-C360P | AR-C360P EFI Configuration Guide - Page 11
    the necessary access privileges, who monitors and manages job flow, performs color calibration, and troubleshoots problems that may arise. • Readme files provide last-minute product information and workarounds for some of the problems you may encounter. Sharp AR-C360P EFI Configuration Guide - 11
  • Sharp AR-C360P | AR-C360P EFI Configuration Guide - Page 12
    Fiery includes support for the Fiery WebTools™ and software for Command WorkStation, which allow an operator to manage all jobs sent to the Sharp AR-C360P. Although it specific to the printer are described in the Printing Guide or the Readme file. Sharp AR-C360P EFI Configuration Guide - 12
  • Sharp AR-C360P | AR-C360P EFI Configuration Guide - Page 13
    software that are available for IPX/SPX, TCP/IP, and AppleTalk networks, and offers troubleshooting hints. • Appendix A describes issues that may occur in setting up the Fiery and offers solutions. Note:Administrator features described in other manuals are summarized on page 7-147. Sharp AR-C360P
  • Sharp AR-C360P | AR-C360P EFI Configuration Guide - Page 14
    diagrams that refer you to other chapters or other manuals for completing your installation. Check those references to find behaves as a networked PostScript printer. The built-in Ethernet interface on the printer supports the following network protocols ( Sharp AR-C360P EFI Configuration Guide - 14
  • Sharp AR-C360P | AR-C360P EFI Configuration Guide - Page 15
    a PostScript printer. For Software Installation Guide, and some information is also provided in Chapter 2. • Administering the Fiery Monitor and maintain system performance and troubleshoot problems that arise. For details, see Chapter 7 of this manual and the Job Management Guide. Sharp AR-C360P
  • Sharp AR-C360P | AR-C360P EFI Configuration Guide - Page 16
    WorkStation software, connect printer files and connect to one or more queues. • For computers that will use them, install Fiery utilities and an Internet browser. • Verify the Fiery in the list of printers and run a test print. Fiery available on the network Sharp AR-C360P EFI Configuration Guide
  • Sharp AR-C360P | AR-C360P EFI Configuration Guide - Page 17
    run Fiery software from remote scope of this manual. If your network supported network types can be operational at the same time. The protocols used in these diagrams are indicated as follows: IPX (Novell) AppleTalk TCP/IP (lpd, nbt, or http) Parallel Other Sharp AR-C360P EFI Configuration Guide
  • Sharp AR-C360P | AR-C360P EFI Configuration Guide - Page 18
    Network Key to setup: 1 Mac OS computer Guide 2 Fiery Setup Mac OS environment with AppleTalk User Software Installation Chapter 4 Fiery built into the printer 2 TCP/IP (http) for Fiery WebTools AppleTalk A Mac OS computer with TCP/IP (http) loaded. Sharp AR-C360P EFI Configuration Guide - 18
  • Sharp AR-C360P | AR-C360P EFI Configuration Guide - Page 19
    Setup Chapter 4 3 NetWare client User Software Installation Guide 4 Windows computer with SPXpage 2-35 Another supported protocol Fiery built into the printer 2 IPX NetWare server 1 IPX TCP WebTools A Windows computer with TCP/IP (http) loaded. Sharp AR-C360P EFI Configuration Guide - 19
  • Sharp AR-C360P | AR-C360P EFI Configuration Guide - Page 20
    Server environment page 2-28 Chapter 4 page 2-30 Another supported protocol Windows NT 4.0/2000/XP /Server 2003 Workstation or 2003 Server acting as print server 1 Fiery built into the printer 2 LAN with NETBEUI, etc. TCP/IP (lpd) for printing Sharp AR-C360P EFI Configuration Guide - 20
  • Sharp AR-C360P | AR-C360P EFI Configuration Guide - Page 21
    4 Another supported protocol Fiery built into the printer 2 TCP/IP (nbt) Windows computer 1 Windows computer 1 Windows computer 1 TCP/IP (nbt) protocol For Windows printing Windows (SMB) printing enabled on the Fiery. Windows NetBios and TCP/IP enabled on the computer. Sharp AR-C360P EFI
  • Sharp AR-C360P | AR-C360P EFI Configuration Guide - Page 22
    page 2-44 Chapter 4 page 2-44 User Software Installation Guide, Chapter 4 page 2-30 Another supported protocol Fiery built into the printer 2 UNIX server or workstation 1, 3 TCP lpr print service loaded. For running Fiery utilities and Fiery WebTools Sharp AR-C360P EFI Configuration Guide - 22
  • Sharp AR-C360P | AR-C360P EFI Configuration Guide - Page 23
    Guide With the parallel port enabled, the Fiery can accept and print jobs sent to its parallel port Parallel A supported network Fiery built into the printer 1 Parallel input Protocol not directly supported on Fiery PC workstation, server, or laptop 2 Sharp AR-C360P EFI Configuration Guide
  • Sharp AR-C360P | AR-C360P EFI Configuration Guide - Page 24
    that plugs into the RJ-45 socket on the Sharp AR-C360P. Note:The 100BaseT type supported by the Fiery is 100BaseTX, also known as Fast Ethernet. If an Ethernet hub is used, it must be a 100BaseTX hub. The term "100BaseT" is used to refer to 100BaseTX. Sharp AR-C360P EFI Configuration Guide - 24
  • Sharp AR-C360P | AR-C360P EFI Configuration Guide - Page 25
    the printer. For the location of the parallel and USB ports, see the illustration on page 1-24. 2. Connect the other end of the cable to the parallel or USB port on the Windows computer. 3. Turn on the computer and the Sharp AR-C360P. 4. Proceed to Setup. Sharp AR-C360P EFI Configuration Guide - 25
  • Sharp AR-C360P | AR-C360P EFI Configuration Guide - Page 26
    the printer over the network, it is acting as a print server to Windows clients. Client computers print to the Fiery by printing to the Windows NT 4.0/ 2000/Server 2003 print server. You can then monitor and control printing at the Windows NT 4.0/2000/Server 2003 server computer. Sharp AR-C360P EFI
  • Sharp AR-C360P | AR-C360P EFI Configuration Guide - Page 27
    more information, see the User Software Installation Guide. • Repeat the installation for all users who print to the Fiery. Each server and workstation running the Fiery utilities with TCP/IP also needs the TCP/IP protocol and the Fiery utility software. Sharp AR-C360P EFI Configuration Guide - 27
  • Sharp AR-C360P | AR-C360P EFI Configuration Guide - Page 28
    the host name and remote printer name of the Fiery in the printer connection. For more information, see page 2-45. • If the Windows NT 4.0/2000/Server 2003 server is also a workstation, install Fiery utilities (see the User Software Installation Guide). Sharp AR-C360P EFI Configuration Guide - 28
  • Sharp AR-C360P | AR-C360P EFI Configuration Guide - Page 29
    file is used as a local Domain Name Services (DNS) equivalent. It has the same printer in the /etc/printcap file. 2. Perform Fiery Setup to support TCP/IP printing. Enter the options in Protocol Setup (IP address of the Fiery, subnet mask, and gateway address). Sharp AR-C360P EFI Configuration Guide
  • Sharp AR-C360P | AR-C360P EFI Configuration Guide - Page 30
    printer The first step in creating a printer is installing the printer driver files, which give your applications access to printer features. You can use the installation instructions in the User Software Installation Guide Fiery if it has been shared by a Sharp AR-C360P EFI Configuration Guide - 30
  • Sharp AR-C360P | AR-C360P EFI Configuration Guide - Page 31
    printer name. You are prompted to set up the printer. When you choose to set it up, the Add Printer Wizard dialog box appears. Follow the procedures in Chapter 1 of the User Software Installation Guide your network does not have a Windows NT 4.0/2000/Server Sharp AR-C360P EFI Configuration Guide - 31
  • Sharp AR-C360P | AR-C360P EFI Configuration Guide - Page 32
    as the one listed in Fiery Setup. • Windows 98/Me: In the File and printer sharing for Microsoft Network Properties dialog box, specify Automatic or Enabled for Browse Master, and page 2-47). • Insert the Sharp AR-C360P Driver CD and wait for it to autorun. Sharp AR-C360P EFI Configuration Guide - 32
  • Sharp AR-C360P | AR-C360P EFI Configuration Guide - Page 33
    22-33 Fiery on a TCP/IP network with Windows NT 4.0/2000/XP/Serv- If the CD does not start automatically, click [Start]→[Run] and enter E:\Setup (where E is your CD-ROM drive) in the Open field, then click on [OK]. Sharp AR-C360P EFI Configuration Guide - 33
  • Sharp AR-C360P | AR-C360P EFI Configuration Guide - Page 34
    built into the Fiery support the following network operating environments: • NetWare-NDS (Novell Directory Services) • Servers running described in the User Software Installation Guide, and printing is described in the Printing Guide. The Fiery can drivers. Sharp AR-C360P EFI Configuration Guide - 34
  • Sharp AR-C360P | AR-C360P EFI Configuration Guide - Page 35
    the Fiery is similar to setting up any other PostScript printer on the network. The Fiery with IPX connections has the Fiery. Overview of IPX printing to the Fiery NetWare file servers support the creation of print queues, which are storage areas for print Sharp AR-C360P EFI Configuration Guide - 35
  • Sharp AR-C360P | AR-C360P EFI Configuration Guide - Page 36
    , set up a file server, print server, and print queue for the Fiery (see page 2-39). With bindery services, you can route all Fiery print jobs through the same NetWare file server, or you can configure more than one file server to handle Fiery jobs. Sharp AR-C360P EFI Configuration Guide - 36
  • Sharp AR-C360P | AR-C360P EFI Configuration Guide - Page 37
    search root (optional) Set Polling Interval Install user software. For printing: Connect client to PQs that you set up on the NetWare FS (associated with the PS selected in NDS Setup). For running Fiery utilities: Configure the connection to the Fiery. Sharp AR-C360P EFI Configuration Guide - 37
  • Sharp AR-C360P | AR-C360P EFI Configuration Guide - Page 38
    select frame types Service Setup PServer Setup and Bindery Setup Add FS (up to 8) Set Polling Interval Install user software. For printing: . For the Fiery, you are mainly concerned with defining a printer, a print server object, and one or more print queue Sharp AR-C360P EFI Configuration Guide - 38
  • Sharp AR-C360P | AR-C360P EFI Configuration Guide - Page 39
    for printing to the Fiery, the network administrator must do the following: • Determine the Directory Services path to the container in which the print server and the print queue for the Fiery will which you defined a NetWare print queue for the Fiery. Sharp AR-C360P EFI Configuration Guide - 39
  • Sharp AR-C360P | AR-C360P EFI Configuration Guide - Page 40
    driver and the Fiery PPD (PostScript printer description). • Adding a network port and connecting the workstation to one or more NetWare queues that have been defined for the Fiery. • Installing Fiery software, such as color reference files. For details, see the User Software Installation Guide
  • Sharp AR-C360P | AR-C360P EFI Configuration Guide - Page 41
    and spooler. You can also make the printer driver available for clients to download from Windows manually unloaded the Broker, it loads and runs when you install NDPS. Make sure you are using the latest NetWare service pack and Novell gateway. Finally, create an Sharp AR-C360P EFI Configuration Guide
  • Sharp AR-C360P | AR-C360P EFI Configuration Guide - Page 42
    \NT4\PS for Windows NT 4.0 DRIVERS\ENGLISH\WIN2K_XP\PS for Windows 2000 DRIVERS\ENGLISH\WIN2K_XP\PS for Windows XP and Windows Server 2003 To set up the printer driver for Windows 98/Me 1. Log on to the Novell file server as a superuser or Administrator. Sharp AR-C360P EFI Configuration Guide - 42
  • Sharp AR-C360P | AR-C360P EFI Configuration Guide - Page 43
    /Me directory, create a directory called Fiery. 3. From the User Software CD, copy the contents of the ENGLISH\WIN_98/ps/folder to the Printer Agent List. The list of Printer Agents appears. 3. Click New. 4. In the Printer Agent (PA) Name field, enter a name. Sharp AR-C360P EFI Configuration Guide
  • Sharp AR-C360P | AR-C360P EFI Configuration Guide - Page 44
    . This name must be either print or hold. 10. In the Select Printer Drivers dialog box, select the printer driver for Windows 98/Me and the driver for Windows NT 4.0/2000/ XP/Server 2003. 11. Click Continue, and the Fiery in a UNIX environment has the same Sharp AR-C360P EFI Configuration Guide - 44
  • Sharp AR-C360P | AR-C360P EFI Configuration Guide - Page 45
    2003 server to connect to the Fiery over TCP/IP. Enter the remote printer name when you set up your Windows NT 4.0/2000/Server 2003 printer, as the "Name of printer or print queue on that (lpd host) server" in the Add LPR Compatible Printer dialog box. Sharp AR-C360P EFI Configuration Guide - 45
  • Sharp AR-C360P | AR-C360P EFI Configuration Guide - Page 46
    of network printers. 2. In the file or utility used by your network, specify the remote printer name, the print server protocol, the queue, and the spool file for the Fiery name you assigned. 3. Make the Fiery available as a printer to other network users. Sharp AR-C360P EFI Configuration Guide - 46
  • Sharp AR-C360P | AR-C360P EFI Configuration Guide - Page 47
    Fiery IP address assigned in Fiery Network Setup. After the Fiery is set up as a network printer, you can also ping the name you gave to the Fiery: ping The server should can set print options with the driver but not from the UNIX command line. Sharp AR-C360P EFI Configuration Guide - 47
  • Sharp AR-C360P | AR-C360P EFI Configuration Guide - Page 48
    Job Management Guide. Even without the Fiery utilities, you can do the following: • Set up the Fiery to print a log of printed jobs automatically after every 55 jobs. • Print a Job Log manually at any time from the Command WorkStation Functions menu (see the Job Management Guide). Sharp AR-C360P EFI
  • Sharp AR-C360P | AR-C360P EFI Configuration Guide - Page 49
    software is manual to refer to Command WorkStation and Command WorkStation LE. Fiery print connections The Fiery supports three print connections: Hold queue, Print queue, and Direct connection. These print connections can be enabled, or "published," to users on the network when you Sharp AR-C360P
  • Sharp AR-C360P | AR-C360P EFI Configuration Guide - Page 50
    33-50 Preparing for Fiery Setup configure Printer Setup. All published connections are constantly checked for the presence of jobs. The Print queue and Direct processed as soon as the previous job is finished and before the next queued job is processed. Sharp AR-C360P EFI Configuration Guide - 50
  • Sharp AR-C360P | AR-C360P EFI Configuration Guide - Page 51
    33-51 Levels of access and control Note:The Direct connection is not supported for LPR printing. Jobs sent to the Direct connection are not stored on the Fiery purposes. Note:To download fonts to the Fiery, you must publish the Direct connection. Sharp AR-C360P EFI Configuration Guide - 51
  • Sharp AR-C360P | AR-C360P EFI Configuration Guide - Page 52
    clearing the Fiery of all job data, performing calibration, defining default color profiles, and setting default values for print options. Operator privileges Operator Fiery state. WebTools The Fiery supports Internet or intranet access with WebTools from Sharp AR-C360P EFI Configuration Guide - 52
  • Sharp AR-C360P | AR-C360P EFI Configuration Guide - Page 53
    IP. • Set an IP address, subnet mask, and gateway address for the Fiery. • Enable Web Services. For more information, see Chapter 6. You can set passwords to control access to WebTools features. If you more information, see Chapter 8 of the Printing Guide. Sharp AR-C360P EFI Configuration Guide - 53
  • Sharp AR-C360P | AR-C360P EFI Configuration Guide - Page 54
    is not affected by passwords. For more information, see Chapter 6 of the Printing Guide. WebDownloader WebDownloader allows you to print PostScript, EPS, PDF, and TIFF files directly , see Chapter 5. Note:WebSetup is supported on Windows computers only. Sharp AR-C360P EFI Configuration Guide - 54
  • Sharp AR-C360P | AR-C360P EFI Configuration Guide - Page 55
    users have equal access to all system functions including Setup, clearing the Fiery, deleting printer fonts, setting the WebLink address, performing calibration, printing to all Fiery print connections, and Print queue, but not to the Direct connection. Sharp AR-C360P EFI Configuration Guide - 55
  • Sharp AR-C360P | AR-C360P EFI Configuration Guide - Page 56
    settings 1 2 3 4 5 in Setup (Minimum) (Maximum) Enable Direct connection ✔ ✔ ✔ Enable Print queue ✔ ✔ ✔ ✔ Enable Web Services ✔ ✔ ✔ Set an Administrator Password (strongly recommended ) ✔ ✔ ✔ ✔ Set an Operator password ✔ ✔ ✔ Sharp AR-C360P EFI Configuration Guide - 56
  • Sharp AR-C360P | AR-C360P EFI Configuration Guide - Page 57
    of the Fiery, the printer, or the network itself changes at your site, you can alter individual settings to correspond to the changed environment. Changing network or port settings may require that you also make changes to other Setup options. Sharp AR-C360P EFI Configuration Guide - 57
  • Sharp AR-C360P | AR-C360P EFI Configuration Guide - Page 58
    normally. 2. With the the printer turned off, connect the network cable to the the printer, as described in Chapter 1. The network should already be installed and operational. 3. Turn on the printer. Proceed to Fiery Setup, described in Chapter 4. Sharp AR-C360P EFI Configuration Guide - 58
  • Sharp AR-C360P | AR-C360P EFI Configuration Guide - Page 59
    color settings • Job Log Setup to specify how the Fiery handles its log of printed jobs • PrintMe Setup to specify the PrintMe settings • Custom Process to specify special custom color settings • Change Password to create and change the administrator password Sharp AR-C360P EFI Configuration Guide
  • Sharp AR-C360P | AR-C360P EFI Configuration Guide - Page 60
    required language for the display panel and various printed reports • Clear Server clears all print jobs from the server • Factory Defaults restores factory default settings Sharp AR-C360P EFI Configuration Guide - 60
  • Sharp AR-C360P | AR-C360P EFI Configuration Guide - Page 61
    out, do not inhale, ingest, or touch it. If the material gets on your skin or clothing, wash it off with soap and water immediately. Sharp AR-C360P EFI Configuration Guide - 61
  • Sharp AR-C360P | AR-C360P EFI Configuration Guide - Page 62
    Setup 2 - Network Setup 3 - Printer Setup After the administrator password has been menu after another using the or keys and pressing ENTER to select the required menu. In each menu enter information about your Fiery and your network and printing environment. Sharp AR-C360P EFI Configuration Guide
  • Sharp AR-C360P | AR-C360P EFI Configuration Guide - Page 63
    , your settings overwrite previous settings. If you choose No, your previous settings are retained. If necessary, the system restarts after you exit from the Setup menu. Sharp AR-C360P EFI Configuration Guide - 63
  • Sharp AR-C360P | AR-C360P EFI Configuration Guide - Page 64
    Server Setup options The Server Setup menu lets you specify system information that pertains to the Fiery and all users. To access the menu, follow the instructions on page 4-62. When you Specify where the machine is located e.g. Office, 4th Floor. Sharp AR-C360P EFI Configuration Guide - 64
  • Sharp AR-C360P | AR-C360P EFI Configuration Guide - Page 65
    the special characters you use. Enable Printing Groups Yes/No [No] Specify whether to enable printer groups for Member Printing. If you enable this option, you must use Command WorkStation to define from the Fiery disk immediately after they are printed. Sharp AR-C360P EFI Configuration Guide - 65
  • Sharp AR-C360P | AR-C360P EFI Configuration Guide - Page 66
    when they communicate with each other. The Network Setup menu includes three submenus that allow you to choose port types, protocols, and network services. You must perform Port Setup and enable at least the correct protocol when it receives a print job. Sharp AR-C360P EFI Configuration Guide - 66
  • Sharp AR-C360P | AR-C360P EFI Configuration Guide - Page 67
    . Default values, where applicable, appear in this manual with square brackets. You should display and select Use this Service Setup AppleTalk printing (PAP) is enabled automatically. LPD Setup Web Services Setup Windows menu as described on page 4-62. Sharp AR-C360P EFI Configuration Guide - 67
  • Sharp AR-C360P | AR-C360P EFI Configuration Guide - Page 68
    in detail in the following section. To exit Network Setup 1. When you have finished entering service settings, choose Exit Network Setup. 2. Choose Yes when prompted to save changes. 3. From the main Setup menu, choose another Setup or choose Exit Setup. Sharp AR-C360P EFI Configuration Guide - 68
  • Sharp AR-C360P | AR-C360P EFI Configuration Guide - Page 69
    are nested, the names of higher-level menus are shown in this chapter to the left of each menu heading. Ethernet Setup Enable Ethernet Yes/No [Yes] Select Yes if you have Ethernet cabling connected port, but it can continue to receive network print jobs. Sharp AR-C360P EFI Configuration Guide - 69
  • Sharp AR-C360P | AR-C360P EFI Configuration Guide - Page 70
    timeout value to determine when the end of the file has been reached. If you experience printing problems, set this option to No. Protocol Setup options To configure the Fiery, choose each protocol or the network cable is not connected (see Appendix A). Sharp AR-C360P EFI Configuration Guide - 70
  • Sharp AR-C360P | AR-C360P EFI Configuration Guide - Page 71
    Ethernet Yes/No [Yes] Select Yes if you have a TCP/IP network connected to the printer over Ethernet cabling. Note: If you are using TCP/IP for printing from Windows computers, proceed to the IP Address option, where you manually set the IP address. Sharp AR-C360P EFI Configuration Guide - 71
  • Sharp AR-C360P | AR-C360P EFI Configuration Guide - Page 72
    values: • 255.0.0.0 if the IP address starts with a number less than 128 • 255.255.0.0 if the IP address starts with a number from 128 through 191 Sharp AR-C360P EFI Configuration Guide - 72
  • Sharp AR-C360P | AR-C360P EFI Configuration Guide - Page 73
    the gateway address for printing with TCP/IP. If your network uses a gateway, you must change the default to a correct gateway address for your network. Sharp AR-C360P EFI Configuration Guide - 73
  • Sharp AR-C360P | AR-C360P EFI Configuration Guide - Page 74
    DNS server. Repeat this for Secondary DNS Server. Domain Name Enter the DNS domain name. Host Name Enter the DNS host name of the Fiery. Sharp AR-C360P EFI Configuration Guide - 74
  • Sharp AR-C360P | AR-C360P EFI Configuration Guide - Page 75
    IP filtering, this option appears. Select Accept to accept, or Deny to reject, IP addresses other than the IP addresses you specify at this setup. Sharp AR-C360P EFI Configuration Guide - 75
  • Sharp AR-C360P | AR-C360P EFI Configuration Guide - Page 76
    filter policy. IP Port Setup. All ports not listed in the following setup options are closed. Supported protocols are listed in parenthesis after the port number. Configure IP Ports Yes/No [Yes] Select Yes to proceed to the subsequent IP Port settings. Sharp AR-C360P EFI Configuration Guide - 76
  • Sharp AR-C360P | AR-C360P EFI Configuration Guide - Page 77
    enable the 515 (lpd) port. (Fiery WebTools and LPD printing) 631 (IPP) Enabled/Disabled [Enabled] Select Enable to enable the 631 (IPP) port. (IPP printing) Sharp AR-C360P EFI Configuration Guide - 77
  • Sharp AR-C360P | AR-C360P EFI Configuration Guide - Page 78
    enabled and does not require setup, as follows: With this protocol And these printing services AppleTalk PAP (Printer Access Protocol) TCP/IP with Ethernet LPD (Line Printer Daemon) This frame type is automatically enabled Ethernet SNAP Ethernet II Sharp AR-C360P EFI Configuration Guide - 78
  • Sharp AR-C360P | AR-C360P EFI Configuration Guide - Page 79
    that were successfully bound. If you answer No to this option, you can select frame types manually. You must choose at least one frame type to enable IPX/SPX protocols. The frame selection screen choosing IPX/SPX Setup, and then choosing Clear Frame Types. Sharp AR-C360P EFI Configuration Guide - 79
  • Sharp AR-C360P | AR-C360P EFI Configuration Guide - Page 80
    Network Setup Service Setup LPD Setup Network Setup Service Setup PServer Setup Service Setup options PServer is a program in the Fiery software that services the note that the Fiery cannot service NDS and bindery emulation servers on the same NDS tree. Sharp AR-C360P EFI Configuration Guide - 80
  • Sharp AR-C360P | AR-C360P EFI Configuration Guide - Page 81
    Service Setup PServer Setup NDS Setup Before entering NDS settings, make sure the Fiery is connected to the network and that you have configured an NDS directory tree with a Printer IPX network running Novell NetWare networking software. Enable NDS Yes/No [ Sharp AR-C360P EFI Configuration Guide - 81
  • Sharp AR-C360P | AR-C360P EFI Configuration Guide - Page 82
    container directly below your current location • The symbol ".." to go up one level With an object selected, printer Enter to travel down the tree, or choose ".." to go up the tree. When you select an object displayed in the second line and press Enter. Sharp AR-C360P EFI Configuration Guide - 82
  • Sharp AR-C360P | AR-C360P EFI Configuration Guide - Page 83
    Fiery print connections. This option lets you restrict the search for Fiery print jobs to a subtree (the Print Queue root) in which the Fiery print Sharp AR-C360P EFI Configuration Guide - 83
  • Sharp AR-C360P | AR-C360P EFI Configuration Guide - Page 84
    the Polling Interval (see page 4-89), or choose Exit PServer Setup to return to the Service Setup menu. Browse to the root of the Print Queue Subtree. This message is displayed if you Exit PServer Setup to return to the Service Setup menu when prompted. Sharp AR-C360P EFI Configuration Guide - 84
  • Sharp AR-C360P | AR-C360P EFI Configuration Guide - Page 85
    Service server is running. If Guest Login is not supported, you need a valid user name and software. Bindery Setup menu Because you can set Menu button to escape and return to the main Bindery Setup menu. To cancel all changes, exit Network Setup Sharp AR-C360P EFI Configuration Guide - 85
  • Sharp AR-C360P | AR-C360P EFI Configuration Guide - Page 86
    from the Printing Unit Control Panel and select No to Save Changes. Network Setup Service Setup PServer Setup Bindery Setup Add File Server This option gives you two ways to prompted to remove a file server (see "Remove File Server" on page 4-89). Sharp AR-C360P EFI Configuration Guide - 86
  • Sharp AR-C360P | AR-C360P EFI Configuration Guide - Page 87
    server you have configured for printing to the Fiery. When you have added all the IPX file servers for your site, choose Exit Bindery Setup. Sharp AR-C360P EFI Configuration Guide - 87
  • Sharp AR-C360P | AR-C360P EFI Configuration Guide - Page 88
    networks. If you do not want to make any changes, press the Menu button to return to the Bindery Setup menu. Enter Your Print Server Password This option appears only if your NetWare print server is password-protected. Enter your print server password. Sharp AR-C360P EFI Configuration Guide - 88
  • Sharp AR-C360P | AR-C360P EFI Configuration Guide - Page 89
    Service Setup PServer Setup The Bindery Setup menu is displayed again. You can edit other connections, choose another Bindery Setup option, or choose Exit Bindery Setup. Remove File Server Remove support increases. This may slow down other network jobs. Sharp AR-C360P EFI Configuration Guide - 89
  • Sharp AR-C360P | AR-C360P EFI Configuration Guide - Page 90
    [No] Broadcasts from SMB devices cannot pass across a router without a WINS name server. Setting up the WINS name server is outside the scope of this manual. To find out if a name server is available, contact your network administrator. Sharp AR-C360P EFI Configuration Guide - 90
  • Sharp AR-C360P | AR-C360P EFI Configuration Guide - Page 91
    printer. manually: Choose Domain Workgroup or Domain List of domains Select the workgroup or domain from the list. Enter the name of the workgroup or domain. For more information about entering text and characters, see "Types of Setup screens" on page 4-63. Sharp AR-C360P EFI Configuration Guide
  • Sharp AR-C360P | AR-C360P EFI Configuration Guide - Page 92
    in Printer Setup are available. E-mail Setup Enable E-mail Services Yes/No [No] This option enables the Fiery to use e-mail as a means of communication for a variety of purposes. The Fiery serves as a messenger between the printer and the e-mail recipient. Sharp AR-C360P EFI Configuration Guide
  • Sharp AR-C360P | AR-C360P EFI Configuration Guide - Page 93
    20 characters. Account Name Enter the account name. This is the internal name your network recognizes, which is not necessarily the same as User Name. Sharp AR-C360P EFI Configuration Guide - 93
  • Sharp AR-C360P | AR-C360P EFI Configuration Guide - Page 94
    mail address to remotely administer Fiery E-mail Services via e-mail. If an error occurs while you are executing a job to e-mail, the e-mail service sends an error message to that administrator at which the Fiery should automatically check for new e-mail. Sharp AR-C360P EFI Configuration Guide - 94
  • Sharp AR-C360P | AR-C360P EFI Configuration Guide - Page 95
    95 Network Setup options Network Setup Service Setup FTP Setup Max Scan File scanning to an FTP site. Select No to return to the main Network Setup menu. Proxy Server IP Address 127.0.0.1 Enter the IP address of the proxy server on to a secure FTP site. Sharp AR-C360P EFI Configuration Guide - 95
  • Sharp AR-C360P | AR-C360P EFI Configuration Guide - Page 96
    44-96 Performing Setup from the Printing Unit Control Panel Network Setup Service Setup SNMP Setup Proxy Server Timeout (sec) 0-999 [0] Enter the length of time, in . Up to 32 ASCII characters, including spaces, can be used for the community name. Sharp AR-C360P EFI Configuration Guide - 96
  • Sharp AR-C360P | AR-C360P EFI Configuration Guide - Page 97
    invalid character is entered or no name is specified, the default "public" is used for the community name. A name consisting only of spaces is invalid. Sharp AR-C360P EFI Configuration Guide - 97
  • Sharp AR-C360P | AR-C360P EFI Configuration Guide - Page 98
    allows users to print (or download) jobs to the Fiery without spooling. Jobs printed to the Direct connection are not saved in the Printed queue. Sharp AR-C360P EFI Configuration Guide - 98
  • Sharp AR-C360P | AR-C360P EFI Configuration Guide - Page 99
    the Fiery disk and printed on a first-in, first-out basis. Only queues published in the Printer Setup are available to users. Note:To print to the Fiery over the parallel port, you must parallel port jobs are automatically printed to that connection. Sharp AR-C360P EFI Configuration Guide - 99
  • Sharp AR-C360P | AR-C360P EFI Configuration Guide - Page 100
    Yes/No [Yes] Select Yes to activate any changes made in the Printer Setup; select No to return to the main Setup menu without making any changes. PostScript Setup options PS (PostScript) Setup allows you selected US; or A4 paper if you selected Metric. Sharp AR-C360P EFI Configuration Guide - 100
  • Sharp AR-C360P | AR-C360P EFI Configuration Guide - Page 101
    printing problems. printer font. If this option is set to No, jobs with fonts that are unavailable on the Fiery hard disk generate a PostScript error and do not print. This setting does not apply to PDF files; font substitution occurs automatically in PDF files. Sharp AR-C360P EFI Configuration Guide
  • Sharp AR-C360P | AR-C360P EFI Configuration Guide - Page 102
    the main Setup menu, choose PCL Setup. 2. Enter the options appropriate to the printing requirements at the site. 3. When you have finished, save changes. In the list of options that follows, default values, where applicable, appear in square brackets. Sharp AR-C360P EFI Configuration Guide - 102
  • Sharp AR-C360P | AR-C360P EFI Configuration Guide - Page 103
    /Roman-8/ECMA-94 L1/PC-8... [Desktop] This option lets you choose the symbol set that best matches the needs of users printing to the Fiery. Sharp AR-C360P EFI Configuration Guide - 103
  • Sharp AR-C360P | AR-C360P EFI Configuration Guide - Page 104
    the printer drivers provided on the User Software CD can override most of these defaults on a job-by-job basis. However, users printing from UNIX or DOS command lines cannot override defaults from their applications. Therefore, you must set defaults in Color Setup. Sharp AR-C360P EFI Configuration
  • Sharp AR-C360P | AR-C360P EFI Configuration Guide - Page 105
    ] The color rendering dictionary (CRD) defines how colors are converted from the RGB color space to device CMYK. Photographic, designed for images, retains the relative balance between colors to maintain the overall appearance of the image. Presentation, Sharp AR-C360P EFI Configuration Guide - 105
  • Sharp AR-C360P | AR-C360P EFI Configuration Guide - Page 106
    a better color balance. Full (Output GCR) offers accurate proofing by providing a colorimetric conversion of all four plates. In this simulation method, the black (K) plate is mixed into the CMY plates, then reseparated based on the Output profile. Sharp AR-C360P EFI Configuration Guide - 106
  • Sharp AR-C360P | AR-C360P EFI Configuration Guide - Page 107
    44-107 Color Setup options RGB Separation Output/Simulation [Output] This option defines how the Fiery processes RGB jobs. Select Output a profile selected in the Output Profile option or in the ColorWise Pro Tools becomes the Fiery default Output Profile. Sharp AR-C360P EFI Configuration Guide - 107
  • Sharp AR-C360P | AR-C360P EFI Configuration Guide - Page 108
    the CMYK values defined in the original applications. For more information, see the Color Guide. Save Changes Yes/No [Yes] Select Yes to activate any changes made in Color Setup; select No to return to the main Setup menu without making any changes. Sharp AR-C360P EFI Configuration Guide - 108
  • Sharp AR-C360P | AR-C360P EFI Configuration Guide - Page 109
    to reselect the language in which to display Setup menus and system messages. To set Job Log options 1. In the main Setup menu, choose Job Log Setup. 2. Enter the options, as described in the following section. 3. When you have finished, save changes. Sharp AR-C360P EFI Configuration Guide - 109
  • Sharp AR-C360P | AR-C360P EFI Configuration Guide - Page 110
    , the Fiery saves a record of all jobs. Note:If Auto Print Job Log is set to No, setting this option to Yes has no effect. Sharp AR-C360P EFI Configuration Guide - 110
  • Sharp AR-C360P | AR-C360P EFI Configuration Guide - Page 111
    the Fiery Administrator password. This is set either from the local Setup at the Printer Control Panel, or remote Setup from Command WorkStation. Remote Fiery Setup Remote Setup in as Administrator. 3. When the Fiery home page appears, click WebSetup. Sharp AR-C360P EFI Configuration Guide - 111
  • Sharp AR-C360P | AR-C360P EFI Configuration Guide - Page 112
    1. Start Command WorkStation. 2. Log on as Administrator. 3. Choose Setup from the Server menu. Regardless of how you access Setup remotely, the following dialog box appears. Note:The interface Fiery, system date and time, passwords, and Job Log printing. Sharp AR-C360P EFI Configuration Guide - 112
  • Sharp AR-C360P | AR-C360P EFI Configuration Guide - Page 113
    the name that appears in the Chooser on an AppleTalk network. Note:Do not use the device name (Sharp AR-C360P) as the server name. If you have more than one Fiery, do not assign them the same deleted from the Fiery disk immediately after they are printed. Sharp AR-C360P EFI Configuration Guide - 113
  • Sharp AR-C360P | AR-C360P EFI Configuration Guide - Page 114
    -Specify whether to enable printer groups for Member Printing. Support-Enter names, phone numbers, and e-mail addresses of contact people at your organization who provide support for the Sharp AR-C360P. This information is then available from the Support tab. Sharp AR-C360P EFI Configuration Guide
  • Sharp AR-C360P | AR-C360P EFI Configuration Guide - Page 115
    manually at any time with the job management tools. Job Log Page Size-Select a paper size for the printed Job Log. Network Setup Network Setup configures the Fiery to receive print jobs over the networks used at your site. If the Fiery is configured to enable Sharp AR-C360P EFI Configuration Guide
  • Sharp AR-C360P | AR-C360P EFI Configuration Guide - Page 116
    IPX/SPX, and TCP/IP • Print Services-including LPD printing (TCP/IP), NetWare printing (PServer), Windows print sharing (SMB), HTTP support (WWW), Internet Printing Protocol (IPP) printing, and Port 9100 printing • E-mail Service- the Fiery E-mail Service Sharp AR-C360P EFI Configuration Guide - 116
  • Sharp AR-C360P | AR-C360P EFI Configuration Guide - Page 117
    Detect if your network environment is mixed, or choose the speed of the network to which the Fiery is attached (10 Mbps or 100 Mbps). Sharp AR-C360P EFI Configuration Guide - 117
  • Sharp AR-C360P | AR-C360P EFI Configuration Guide - Page 118
    job is complete. Until the timeout, the Fiery cannot receive new jobs through the parallel port, but it can continue to receive network print jobs. Sharp AR-C360P EFI Configuration Guide - 118
  • Sharp AR-C360P | AR-C360P EFI Configuration Guide - Page 119
    55-119 Network Setup Protocols You can change TCP/IP, AppleTalk and IPX/SPX protocol settings for the Fiery. Change these settings on the Protocol1 and Protocol2 tabs. Sharp AR-C360P EFI Configuration Guide - 119
  • Sharp AR-C360P | AR-C360P EFI Configuration Guide - Page 120
    any other operations. To set the subnet mask, enter one of the following values: 255.0.0.0 if the IP address starts with a number less than 128 Sharp AR-C360P EFI Configuration Guide - 120
  • Sharp AR-C360P | AR-C360P EFI Configuration Guide - Page 121
    Fiery IP address to another device, first set the Fiery address to a null address. AppleTalk The current AppleTalk zone is displayed in the Protocol2 tab. Sharp AR-C360P EFI Configuration Guide - 121
  • Sharp AR-C360P | AR-C360P EFI Configuration Guide - Page 122
    IPX/SPX Use this option to specify IPX/SPX frame types. The Fiery supports the following Ethernet frame types for IPX/SPX: Ethernet 802.2, Ethernet 802.3, Ethernet II, and Ethernet SNAP. You can also allow the Fiery to select the frame type automatically. Sharp AR-C360P EFI Configuration Guide - 122
  • Sharp AR-C360P | AR-C360P EFI Configuration Guide - Page 123
    55-123 Network Setup DNS Setup You can enable DNS Setup to allow the Fiery to resolve a name to an IP address. Sharp AR-C360P EFI Configuration Guide - 123
  • Sharp AR-C360P | AR-C360P EFI Configuration Guide - Page 124
    disable SMB print services. • HTTP Support (WWW)-enable or disable support for Fiery WebTools. • Port 9100-enable or disable support for Port 9100 printing. • E-mail Service-specify the Fiery E-mail Service. • FTP Service-enable or disable FTP services. Sharp AR-C360P EFI Configuration Guide - 124
  • Sharp AR-C360P | AR-C360P EFI Configuration Guide - Page 125
    55-125 Network Setup LPD Printing Enable LPD Printing Service-Select to enable or disable LPD printing services. Enable Web Services-Select to enable or disable web services. Enable FTP Services-Select to enable or disable FTP services. Sharp AR-C360P EFI Configuration Guide - 125
  • Sharp AR-C360P | AR-C360P EFI Configuration Guide - Page 126
    option to specify NDS and Bindery services. To specify the NDS tree setting from remote Fiery Setup 1. Select Enable NDS and click Change Trees. 2. In the NDS Configuration dialog box that appears, double-click an NDS tree in the Available Trees list. Sharp AR-C360P EFI Configuration Guide - 126
  • Sharp AR-C360P | AR-C360P EFI Configuration Guide - Page 127
    55-127 Network Setup 3. In the Select User Login window, select Use Default User Information or enter your password, and click Next. 4. Navigate to the NDS container, select it, and click Next. If necessary, enter the password. Sharp AR-C360P EFI Configuration Guide - 127
  • Sharp AR-C360P | AR-C360P EFI Configuration Guide - Page 128
    55-128 Setting up the Fiery from a Windows Computer 5. Select Use Default Print Queue Root, or navigate to the Print Queue Root and click Finish. Sharp AR-C360P EFI Configuration Guide - 128
  • Sharp AR-C360P | AR-C360P EFI Configuration Guide - Page 129
    dialog box appears, displaying information about the print server. Bindery Setup. Use this option to specify Bindery services. To add bindery connections from remote Fiery Setup 1. Select Enable PServer mode from the Service1 tab. 2. Click Bindery Setup. Sharp AR-C360P EFI Configuration Guide - 129
  • Sharp AR-C360P | AR-C360P EFI Configuration Guide - Page 130
    list and click Finish. If necessary, enter the appropriate password in the Print Server Password dialog box to log on to the selected file server. Sharp AR-C360P EFI Configuration Guide - 130
  • Sharp AR-C360P | AR-C360P EFI Configuration Guide - Page 131
    . To remove bindery connections from remote Fiery Setup 1. Select Enable PServer mode from the Service1 tab. 2. Click Bindery Setup. The Novell Setup dialog box appears. Sharp AR-C360P EFI Configuration Guide - 131
  • Sharp AR-C360P | AR-C360P EFI Configuration Guide - Page 132
    Servers list. 4. With the file server selected in the Selected Servers list, click Remove. 5. Click OK. PServer Poll Interval . Specify the polling interval (in seconds) Sharp AR-C360P EFI Configuration Guide - 132
  • Sharp AR-C360P | AR-C360P EFI Configuration Guide - Page 133
    55-133 Network Setup for NetWare printing. Sharp AR-C360P EFI Configuration Guide - 133
  • Sharp AR-C360P | AR-C360P EFI Configuration Guide - Page 134
    field. Enable Windows Printing Service-Select to enable SMB (Server Message Block), the file and printer sharing protocol built into Windows software. For information on setting up a Windows client for Windows printing, see the User Software Installation Guide. Sharp AR-C360P EFI Configuration Guide
  • Sharp AR-C360P | AR-C360P EFI Configuration Guide - Page 135
    WebTools include Status, WebLink, WebSetup, WebScan, and WebDownloader. A Java-enabled Web browser and a valid IP address are required for each user. For details on supported browsers and workstation requirements, see the User Software Installation Guide. Sharp AR-C360P EFI Configuration Guide - 135
  • Sharp AR-C360P | AR-C360P EFI Configuration Guide - Page 136
    the User Software Installation Guide. Port 9100 printing Enable Port 9100-Enables applications to open a TCP/IP socket to the Fiery at Port 9100 to download a print job. Port 9100 Queue-Allows you to attach Port 9100 to any of the published Fiery print connections. Sharp AR-C360P EFI Configuration
  • Sharp AR-C360P | AR-C360P EFI Configuration Guide - Page 137
    55-137 Network Setup Email Services E-mail Service Setup-Enabling e-mail services is required for all e-mail client services. Enable Print via E-mail-If selected, print jobs sent via e-mail e-mail protocol used to communicate with the incoming mail server. Sharp AR-C360P EFI Configuration Guide - 137
  • Sharp AR-C360P | AR-C360P EFI Configuration Guide - Page 138
    e-mail, E-mail Service sends an error message to the Administrator E-mail Address specified. The administrator can authorize additional administrator e-mail addresses from this e-mail address. Printer Setup options From this dialog box, you can access the Printer Setup and Paper Sharp AR-C360P EFI
  • Sharp AR-C360P | AR-C360P EFI Configuration Guide - Page 139
    . Note:In the following illustrations, "Device name" represents the actual printer model, which is Sharp AR-C360P. Printer connections Specify whether to publish the Print queue, Hold queue, or system pages such as the Start Page, Test Page, and Job Log. Sharp AR-C360P EFI Configuration Guide - 139
  • Sharp AR-C360P | AR-C360P EFI Configuration Guide - Page 140
    is not printed. Scale to Fit-Specify whether to print data formatted for one size page onto a different size page, without modifying the print data. Sharp AR-C360P EFI Configuration Guide - 140
  • Sharp AR-C360P | AR-C360P EFI Configuration Guide - Page 141
    Printing Guide. Note:To change the Group Name or Group Password settings for a job that a user has already sent from the printer driver, use WorkStation Server menu. 2. Select the printing group name in the Printing Groups Setup dialog box and click Modify. Sharp AR-C360P EFI Configuration Guide -
  • Sharp AR-C360P | AR-C360P EFI Configuration Guide - Page 142
    from the Command WorkStation Server menu. 2. Select the printing software for printing on remote workstations, as described in the User Software Installation Guide. To confirm the network connection and your Setup, print a test job from a remote workstation. Sharp AR-C360P EFI Configuration Guide
  • Sharp AR-C360P | AR-C360P EFI Configuration Guide - Page 143
    WorkStation, choose Print Pages from the File menu. 2. Click Configuration. 3. Click Print. Post the current Configuration page near the server for quick reference. Users need the information on this page, such as the current printer default settings. Sharp AR-C360P EFI Configuration Guide - 143
  • Sharp AR-C360P | AR-C360P EFI Configuration Guide - Page 144
    required. 3. Enable Web Services. 4. In Fiery Printer Setup, confirm that the supports the Java language and frames. Make sure Java is enabled. For more information on supported browsers and Fiery WebTools requirements, see the User Software Installation Guide. Sharp AR-C360P EFI Configuration Guide
  • Sharp AR-C360P | AR-C360P EFI Configuration Guide - Page 145
    Setup and Printer Setup. Service Setup > Web Services Setup. 4. Exit Network Setup. Choose OK to Save Changes. Setting the WebLink destination You can change the pre-set WebLink destination; this function requires the Administrator password, if one has been set. Sharp AR-C360P EFI Configuration Guide
  • Sharp AR-C360P | AR-C360P EFI Configuration Guide - Page 146
    click OK. 4. Press the Ctrl key as you click WebLink. The Update WebLink dialog box appears. 5. Enter the new WebLink address (URL) and click OK. Sharp AR-C360P EFI Configuration Guide - 146
  • Sharp AR-C360P | AR-C360P EFI Configuration Guide - Page 147
    the user software and are manual). For these operations And these tasks See Setting up network servers Setting up servers to manage and share printing services This manual Printer Setup, Chapter 2, pages 4-98 and 5-139 Passwords, page 7-149 Chapter 3 Sharp AR-C360P EFI Configuration Guide
  • Sharp AR-C360P | AR-C360P EFI Configuration Guide - Page 148
    pages Installing color profiles Color Guide User Software Installation Guide Maintaining optimal Fiery performance Tips Deleting jobs, clearing queues page 7-156, and Job Management Guide Troubleshooting Troubleshooting Fiery Setup Appendix A Sharp AR-C360P EFI Configuration Guide - 148
  • Sharp AR-C360P | AR-C360P EFI Configuration Guide - Page 149
    the Job Management Guide. Note:The Operator password can be set and changed only from Fiery WebSetup, or Command WorkStation. To change the Fiery password 1. Scroll through the main Setup menu and choose Change Password. 2. Enter and confirm the password, as follows. Sharp AR-C360P EFI Configuration
  • Sharp AR-C360P | AR-C360P EFI Configuration Guide - Page 150
    . If you make a mistake, you are prompted to enter the password again. The new password is effective after you save changes and restart the Fiery. Sharp AR-C360P EFI Configuration Guide - 150
  • Sharp AR-C360P | AR-C360P EFI Configuration Guide - Page 151
    setting passwords) and job control. We strongly recommend that you set at least an Administrator password to protect the Fiery from unauthorized changes to Setup. Sharp AR-C360P EFI Configuration Guide - 151
  • Sharp AR-C360P | AR-C360P EFI Configuration Guide - Page 152
    Fiery FreeForm masters, and the index of Fiery FreeForm masters. To clear the Fiery, scroll through the Setup menu and choose Clear Server. You are asked to confirm your selection. If the Administrator password has been set, you are prompted to enter it. Sharp AR-C360P EFI Configuration Guide - 152
  • Sharp AR-C360P | AR-C360P EFI Configuration Guide - Page 153
    Service feature allows an administrator to import a list of e-mail addresses to the Fiery by sending e-mail messages to the Fiery. Note:E-mail messages can be sent only from an administrator account. The Fiery supports entry in the Print address book. Sharp AR-C360P EFI Configuration Guide - 153
  • Sharp AR-C360P | AR-C360P EFI Configuration Guide - Page 154
    . The Fiery also lists any addresses that cannot be added and includes the reason. If the address book is not cleared, the reason is given. Sharp AR-C360P EFI Configuration Guide - 154
  • Sharp AR-C360P | AR-C360P EFI Configuration Guide - Page 155
    of address book For example: Removed from Address Book User To receive help for Fiery e-mail services #Help RE: Help Fiery e-mail response message field Deleted Address 1 Deleted Address 2 The to obtain an IP address automatically for the Fiery. Sharp AR-C360P EFI Configuration Guide - 155
  • Sharp AR-C360P | AR-C360P EFI Configuration Guide - Page 156
    or a user of the job management tools with Operator privileges can move (or copy) all the Hold queue jobs to the Print queue for printing. Sharp AR-C360P EFI Configuration Guide - 156
  • Sharp AR-C360P | AR-C360P EFI Configuration Guide - Page 157
    adequate disk space on the Fiery Periodically review the list of jobs in the Hold Printer Setup). To move or remove queued jobs, use the job management tools. When you free up disk space by removing inactive jobs, new jobs are spooled and printed more quickly. Sharp AR-C360P EFI Configuration Guide
  • Sharp AR-C360P | AR-C360P EFI Configuration Guide - Page 158
    , and restarting the Sharp AR-C360P Generally, you can leave the machine running all the time. This section describes how to reboot, shut down, and restart the system when necessary. Shutting down and rebooting the printing unit You may need to shut down the printer for service, or reboot the
  • Sharp AR-C360P | AR-C360P EFI Configuration Guide - Page 159
    With the printing unit in the READY state, press the or keys to select the Shutdown Menu, then press the ENTER key to select it. 2. Press the or keys to select Restart, then press the ENTER key to restart the Fiery without rebooting the operating system. Sharp AR-C360P EFI Configuration Guide - 159
  • Sharp AR-C360P | AR-C360P EFI Configuration Guide - Page 160
    not reach the Idle state, contact your authorized service/support provider. Troubleshooting during Setup from the Control Panel The following section explains some error and alert messages you may see during Setup that might not be self-explanatory. Sharp AR-C360P EFI Configuration Guide - 160
  • Sharp AR-C360P | AR-C360P EFI Configuration Guide - Page 161
    Service Setup > PServer Setup > NDS Setup) Invalid frame size. Warning! IPX network number is zero. No NDS trees found. Means The Ethernet network cable is not attached to the connector on the Sharp AR-C360P types on the Fiery are properly configured. Sharp AR-C360P EFI Configuration Guide - 161
  • Sharp AR-C360P | AR-C360P EFI Configuration Guide - Page 162
    Troubleshooting After this Setup screen Select NDS Tree (Network Setup > Service Setup > PServer Setup > NDS Setup) Navigating NDS tree (Network Setup > Service Setup > PServer Setup > NDS Setup) Bindery Setup (Network Setup > Service to review your Sharp AR-C360P EFI Configuration Guide - 162
  • Sharp AR-C360P | AR-C360P EFI Configuration Guide - Page 163
    a list of supported servers or a list of all servers. Check cable connections and make sure the NetWare server is turned on. Enter First Letters of Server Name (Network Setup > Service Setup > PServer one of those servers, so as to add another. Sharp AR-C360P EFI Configuration Guide - 163
  • Sharp AR-C360P | AR-C360P EFI Configuration Guide - Page 164
    AA-164 Troubleshooting After this Setup screen This message Means Add Server, Enter Your Login Name, Enter Your File Server Password (Network Setup > Service Setup > PServer Setup > Bindery on the NetWare server or tree for the purpose of setup. Sharp AR-C360P EFI Configuration Guide - 164
  • Sharp AR-C360P | AR-C360P EFI Configuration Guide - Page 165
    AA-165 Troubleshooting the Fiery • Log in with a different account. At the ENTER LOGIN NAME screen, change the default name (guest) , if necessary. • The Fiery is configured with the correct frame types for communication with the desired Novell servers. Sharp AR-C360P EFI Configuration Guide - 165
  • Sharp AR-C360P | AR-C360P EFI Configuration Guide - Page 166
    AA-166 Troubleshooting Novell error messages Novell error 220 Guest account not available. 222 Unable to log different login account. The error screen exits to the File Server Login screen. Pressing the Menu button returns to the PServer Setup screen. Sharp AR-C360P EFI Configuration Guide - 166
  • Sharp AR-C360P | AR-C360P EFI Configuration Guide - Page 167
    a printer on the network are due to conflicting or missing name or address settings for the Fiery. You must enter names in specific places. The required names are: • TCP/IP host name (also known as the DNS name), which is defined by your organization. Sharp AR-C360P EFI Configuration Guide - 167
  • Sharp AR-C360P | AR-C360P EFI Configuration Guide - Page 168
    AA-168 Troubleshooting Enter the host name as the Server Name in Fiery Setup. • Remote printer (internal machine) name. Use one of the following: print hold Note:If you change 64 page 2-26 page 2-26 print or hold page 2-44 print or hold - page 2-34 Sharp AR-C360P EFI Configuration Guide - 168
  • Sharp AR-C360P | AR-C360P EFI Configuration Guide - Page 169
    to the Fiery, an error message is displayed. The problem can occur when: • The printer is initially turned on • The printer restarts • You have changed settings affecting the server address and have not reconfigured the connection to the server Sharp AR-C360P EFI Configuration Guide - 169
  • Sharp AR-C360P | AR-C360P EFI Configuration Guide - Page 170
    AA-170 Troubleshooting If you see this problem, try the following solutions, in this order: • A described in Chapter 1 of the User Software Installation Guide. • Restart the Fiery. For information on other error conditions, see the Job Management Guide. Sharp AR-C360P EFI Configuration Guide - 170
  • Sharp AR-C360P | AR-C360P EFI Configuration Guide - Page 171
    24 8-pin RJ-45 connector 1-24 A access level scenarios 3-55 access to network and software 3-49 accessing Setup from Control Panel 4-61 from Windows computer 5-111 Account Name option, BOOTP protocol 4-71, 4-72 broken LCD 4-61 Broker, NDPS printing 2-41 Sharp AR-C360P EFI Configuration Guide - 171
  • Sharp AR-C360P | AR-C360P EFI Configuration Guide - Page 172
    determining IPX frame types bound 4-79 printing 5-143, 7-155 troubleshooting connection problems A-169 Configure button, Fiery WebTools 6-145 Configure IP Ports option Job Log Setup 4-109 Network Setup 4-66 Printer Setup 4-98 PS (PostScript) Setup 4-100 Sharp AR-C360P EFI Configuration Guide - 172
  • Sharp AR-C360P | AR-C360P EFI Configuration Guide - Page 173
    4-80, 5-125 NDS option 4-81, 5-126 Parallel Port option 4-69, 5-118 Port 9100 Print Services option 4-92, 5-136 Preview option 5-114 Print via E-mail option 5-137 Printed Queue option 4-65, First Letters of Server Name (search option), Bindery Setup 4-86 Sharp AR-C360P EFI Configuration Guide - 173
  • Sharp AR-C360P | AR-C360P EFI Configuration Guide - Page 174
    130 file types and parallel port setup 4-70, 5-118 font substitution 4-101, 5-140 frame types supported AppleTalk 4-78 IPX/SPX 4-78 IPX/SPX, Ethernet 4-78, 5-122 TCP/IP 4-78 From Ignore EOF Character option 4-70, 5-118 improving server performance 7-156 Sharp AR-C360P EFI Configuration Guide - 174
  • Sharp AR-C360P | AR-C360P EFI Configuration Guide - Page 175
    34 to 2-40 Bindery file server, connecting 4-85 NDS (Novell Directory Services) 2-38, 4-80, 5-124 NetWare client setup 2-39 NetWare server 78 summary of Setup options 4-67 J Java to support Internet browser 6-144 Job Log clearing automatically 4-110 A-167 Sharp AR-C360P EFI Configuration Guide - 175
  • Sharp AR-C360P | AR-C360P EFI Configuration Guide - Page 176
    part of initial Setup 5-111 troubleshooting A-164 New Password option 7-150 Novell, see NetWare O Operator password 7-149 privileges 3-52 Outgoing Mail Server option, Email Setup 5-138 Outgoing Server option, E-mail Setup 4-93 Output Profile option 4-107 Sharp AR-C360P EFI Configuration Guide - 176
  • Sharp AR-C360P | AR-C360P EFI Configuration Guide - Page 177
    option 5-140 Printed queue 3-50, 4-65 printer connection failure A-167 not found A-167 not in Chooser A-167 Printer Agent, NDPS 2-41 Printer Setup from Control Panel 4-98 from Windows computer 5-138 part of initial Setup 5-111 Printed queue options 5-113 Sharp AR-C360P EFI Configuration Guide - 177
  • Sharp AR-C360P | AR-C360P EFI Configuration Guide - Page 178
    printing groups and passwords 5-142 problems, see troubleshooting protocols for assigning IP address automatically Printer Setup, Control Panel 4-100, 4-102 Setup, Control Panel 4-66 Scale to Fit option 5-140 Search Name option (adding a file server) 4-86 Sharp AR-C360P EFI Configuration Guide
  • Sharp AR-C360P | AR-C360P EFI Configuration Guide - Page 179
    Setup 4-110 Network Setup 4-66 Port Setup 4-69 Printer Setup 4-98 Protocol Setup 4-70 to 4-78 Security Setup 4-75 Server Setup 4-64 Service Setup 4-80 summary 4-59 SMB, see Windows printing diagram 1-22 protocol setup 4-71 published connections 4-98 Sharp AR-C360P EFI Configuration Guide - 179
  • Sharp AR-C360P | AR-C360P EFI Configuration Guide - Page 180
    troubleshooting Command WorkStation connection problems A-169 connection to printer fails A-167 Printer not found in the selection list of Fiery utilities A-169 Printer warning display window breakage 4-61 Web Services Setup 4-92, 5-135 WebDownloader, see Sharp AR-C360P EFI Configuration Guide - 180
  • Sharp AR-C360P | AR-C360P EFI Configuration Guide - Page 181
    I-181 Index WINS IP Address option 4-91, 5-135 WINS name server 4-90 Sharp AR-C360P EFI Configuration Guide - 181
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181