Sharp CD-BA150 CD-BA150 Operation Manual
Sharp CD-BA150 - Compact Stereo System Manual
 |
UPC - 074000410862
View all Sharp CD-BA150 manuals
Add to My Manuals
Save this manual to your list of manuals |
Sharp CD-BA150 manual content summary:
- Sharp CD-BA150 | CD-BA150 Operation Manual - Page 1
MINI COMPONENT SYSTEM OPERATION MANUAL MODEL CD-BA150 Thank you for purchasing this SHARP product. To obtain the best performance from this product, please read this manual carefully. It will guide you in operating your SHARP product. CD-BA150 Mini Component System consisting of CD-BA150 (main - Sharp CD-BA150 | CD-BA150 Operation Manual - Page 2
UNITS 15 RESETTING THE MICROCOMPUTER 15 TRANSPORTING THE UNIT 15 MAINTENANCE 16 SPECIFICATIONS 16 CONSUMER LIMITED WARRANTY Back cover ACCESSORIES Remote control × 1 (RRMCG0219AWSA) FM/AM loop antenna × 1 (QANTL0007AWZZ) AC power cord × 1 (QACCD0020AWZZ) 1 Note: Parts and accessories - Sharp CD-BA150 | CD-BA150 Operation Manual - Page 3
the AC outlet for safety. s Care of compact discs Compact discs are fairly resistant to damage, however mistracking can occur due to an accumulation of dirt on the disc surface. Follow the guidelines below for maximum enjoyment from your CD collection and player. q Do not write on either side of - Sharp CD-BA150 | CD-BA150 Operation Manual - Page 4
antenna AM loop antenna q Unplug the AC power cord from the AC outlet before connecting or disconnecting any component. s Antenna connection Connect the antenna wire to the ANTENNA jack. FM antenna Position the FM antenna the lower part of the speaker grille first. 2 Remove the upper part of the - Sharp CD-BA150 | CD-BA150 Operation Manual - Page 5
the one supplied may cause an electric shock or fire. s Demo mode When the AC power cord is first connected, the unit will enter the demonstration mode. To cancel the demonstration mode: When the unit is in the stand-by mode (demonstration mode), press the X-BASS/DEMO button. q The demonstration - Sharp CD-BA150 | CD-BA150 Operation Manual - Page 6
concerning use: q Replace the batteries if the operating distance is reduced or if the operation becomes erratic. q Periodically clean the transmitter LED on the remote control and the sensor on the main unit with a soft cloth. q Exposing the sensor on the main unit to strong light may in- terfere - Sharp CD-BA150 | CD-BA150 Operation Manual - Page 7
set for the 12-hour (AM 12:00) system. 1 Press the ON/STAND-BY button to enter the stand-by mode. 2 Press the CLOCK button. 3 Within 5 occurs or after the AC power cord is disconnected. If this happens, follow mode: x Perform steps 1 - 2 in the section "RESETTING THE MICROCOMPUTER", on page 15. - Sharp CD-BA150 | CD-BA150 Operation Manual - Page 8
the VOLUME button to decrease the volume. 0 1 2 ..... 29 30 MAXIMUM (Main unit) (Remote control) X-BASS indicator s Extra bass (X-BASS) When the power is first turned on, the unit will enter the extra bass mode which emphasizes the bass frequencies, and "XBASS" will appear. To cancel the extra - Sharp CD-BA150 | CD-BA150 Operation Manual - Page 9
playback: x 6 Press the CD button on the remote control. 6 q " " will appear. y 0R Press the button to resume playback from the same point. To stop playback: Press the s (CD s) button. To remove the CDs: While in the stop mode, press the OPEN/CLOSE button. q The disc tray will open. Remove the - Sharp CD-BA150 | CD-BA150 Operation Manual - Page 10
mode to select the track number, and then press the 0/R (0R) button. Note: q APSS can only search for music on a single disc. s Random play s Cue and review (Remote control operation) The tracks on the disc the s (CD s) button after you are through listening. Otherwise, the disc(s) will play - Sharp CD-BA150 | CD-BA150 Operation Manual - Page 11
clear the programmed selections: Press the CLEAR button on the remote control while the disc is stopped. q Each time the button is pressed, disc tray automatically cancels the programmed sequence. q Even if you press the ON/STAND-BY button to enter the stand-by mode or the function is changed from CD - Sharp CD-BA150 | CD-BA150 Operation Manual - Page 12
or ) button to tune into the desired station. X W Manual tuning: Press the TUNING/TIME ( or ) button as many times q " " will appear when an FM broadcast is in stereo. 6 If the FM reception is weak, press the TUNER ON/STAND-BY button to enter the stand-by mode. Note: q The last station tuned in will - Sharp CD-BA150 | CD-BA150 Operation Manual - Page 13
mode. Backup function: The backup function protects all station presets for a few hours should there be a power failure or the AC power cord Press the 0/R button to start playback. q When playback is performed using the remote control, press the TAPE 1 or TAPE 2 0 button. To stop playback: Press the - Sharp CD-BA150 | CD-BA150 Operation Manual - Page 14
tapes should not be used for recording or dubbing. s Recording from the built-in CD player (CD Synchronized Recording System) 1 Press the ON/STAND-BY button to turn the power on. 2 Press the CD button and load the desired disc. q Use the APMS function to store the tracks you want to record in memory - Sharp CD-BA150 | CD-BA150 Operation Manual - Page 15
unit operation) POWER TIMER/ ON/ STAND-BY SLEEP Timer set indicator TUNER (BAND) CD TAPE (1 2) VIDEO/ AUX TUNING/ TIME ( ) MEMORY/ SET 3 4 5 until a new time is entered. s Sleep operation The radio, compact disc and cassette deck can all be turned off automatically. 1 Play back mode. 14 - Sharp CD-BA150 | CD-BA150 Operation Manual - Page 16
RCA cord RESETTING THE MICROCOMPUTER X-BASS/ DEMO POWER ON/ STAND-BY TRANSPORTING THE UNIT POWER ON/ STAND-BY OPEN/ CLOSE CD s Video cord to connect the desired external unit to the VIDEO/AUX jacks. (red → right channel, white → left channel) q When using video equipment (Laser Disc player - Sharp CD-BA150 | CD-BA150 Operation Manual - Page 17
, causing poor sound. Demagnetize these parts once every 30 hours of playing/recording time by using a commercial tape head demagnetizer. Read the demagnetizer's instructions carefully before use. q In order to ensure proper operation of the CD player, preventative maintenance (cleaning of the - Sharp CD-BA150 | CD-BA150 Operation Manual - Page 18
do to Obtain Service: CD-BA150 Mini Component System (Be sure to have this information available when you need service for your Product.) One (1) year parts and labor from the date of purchase. Non-functional accessories, supplies, and consumable items. At a Sharp Authorized Servicer located in the
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
 |
 |
OPERATION MANUAL
FOR YOUR RECORDS
For your assistance in reporting this unit in case of loss
or theft, please record below the model number and serial
number which are located on the rear of the unit.
Please retain this information.
Model number
______________________________
Serial number
______________________________
Date of purchase____________________________
Place of purchase
___________________________
MODEL
CD-BA150
MINI COMPONENT SYSTEM
Thank you for purchasing this SHARP product.
To obtain the best performance from this product,
please read this manual carefully.
It will guide you in operating your SHARP product.
CD-BA150 Mini Component System consisting of
CD-BA150 (main unit) and CP-BA150 (speaker system).
Note:
This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harm-
ful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a par-
ticular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the inter-
ference by one or more of the following measures:
●
Reorient or relocate the receiving antenna.
●
Increase the separation between the equipment and receiver.
●
Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
●
Consult the dealer or an experienced radio/TV technician for help.
WARNING
FCC Regulations state that any unauthorized changes or modifications
to this equipment not expressly approved by the manufacturer could void
the user’s authority to operate this equipment.
CAUTION
RISK OF ELECTRIC SHOCK
DO
NOT OPEN
The lightning flash with arrowhead
symbol, within an equilateral triangle,
is intended to alert the user to the
presence of uninsulated "dangerous
voltage" within the product’s enclosure
that may be of sufficient magnitude to
constitute a risk of electric shock to
persons.
CAUTION:
TO REDUCE THE
RISK OF ELECTRIC SHOCK, DO
NOT REMOVE
COVER (OR
BACK).
NO USER-SERVICEABLE PARTS
INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSON-
NEL.
The exclamation point within an equi-
lateral triangle is intended to alert the
user to the presence of important
operating and maintenance (servic-
ing) instructions in the literature ac-
companying the appliance.
Caution - use of controls or adjustments or per-
formance of procedures other than those specified
herein may result in hazardous radiation exposure.
WARNING: TO REDUCE THE RISK OF
FIRE OR ELECTRIC SHOCK, DO NOT EX-
POSE THIS APPLIANCE TO RAIN OR
MOISTURE.
Note:
●
It is the intent of Sharp that this product be used in
full compliance with the copyright laws of the United
States and that prior permission be obtained from
copyright owners whenever necessary.