Sharp DT 200 DT-200 Operation Manual

Sharp DT 200 - Home Theater TV Projector Manual

Get Sharp DT 200 - Home Theater TV Projector PDF manuals and user guides
UPC - 074000358607
View all Sharp DT 200 manuals
Add to My Manuals
Save this manual to your list of manuals

Sharp DT 200 manual content summary:

  • Sharp DT 200 | DT-200 Operation Manual - Page 1
    ENGLISH PROJECTOR PROJECTEUR PROYECTOR PROJETOR DT-200 OPERATION MANUAL MODE D'EMPLOI MANUAL DE OPERACION MANUAL DE OPERAÇÃO FRANÇAIS ESPAÑOL PORTUGUÊS DT-200
  • Sharp DT 200 | DT-200 Operation Manual - Page 2
    DT-200 Serial No.: There are two important reasons for prompt warranty registration of your new SHARP Projector, using the REGISTRATION CARD packed with the projector. 1. WARRANTY This is to assure that you immediately receive the full benefit of the parts, service (servicing) instructions in
  • Sharp DT 200 | DT-200 Operation Manual - Page 3
    /TV technician for help. U.S.A. ONLY Declaration of Conformity SHARP PROJECTOR, MODEL DT-200 This device complies with Part 15 of the FCC rules SERVICING. MEDIUM PRESSURE LAMP : RISK OF EXPLOSION. POTENTIAL HAZARD OF GLASS PARTICLES IF LAMP HAS RUPTURED. HANDLE WITH CARE. SEE OPERATION MANUAL.
  • Sharp DT 200 | DT-200 Operation Manual - Page 4
    basic rules for its installation, use and servicing. For your own protection and reliable usage of your Projector, please be sure to read these "IMPORTANT SAFEGUARDS" carefully before use. 1. Read Instructions All the safety and operating instructions should be read before the product is operated
  • Sharp DT 200 | DT-200 Operation Manual - Page 5
    SERVICING. MEDIUM PRESSURE LAMP : RISK OF EXPLOSION. POTENTIAL HAZARD OF GLASS PARTICLES IF LAMP HAS RUPTURED. HANDLE WITH CARE. SEE OPERATION MANUAL 41˚F DT-200 (+5˚C) DT-200 Cautions Concerning the Setup of the Projector For minimal servicing and to maintain high image quality, SHARP recommends
  • Sharp DT 200 | DT-200 Operation Manual - Page 6
    Important Information IMPORTANT SAFEGUARDS Temperature Monitor Function If the projector starts to overheat due to setup problems "TEMP" and " " will blink in the lower-left corner of the picture. If the temperature continues to rise, the lamp will turn off, the TEMPERATURE
  • Sharp DT 200 | DT-200 Operation Manual - Page 7
    Confirming the Lamp Usage Time 44 Replacing the Lamp 45 Cleaning the Ventilative Holes 48 Using the Kensington Lock 49 Troubleshooting 49 Service Information (For the U.S 49 Appendix Connecting Pin Assignments 50 Computer Compatibility Chart 51 Dimensions 52 Specifications 53 Glossary 54
  • Sharp DT 200 | DT-200 Operation Manual - Page 8
    Important Information Outstanding Features 1. DMD™* (Digital Micromirror Device) Chip The DMD Chip allows for a higher contrast image. It enables smoother expression of details of an image, and high picture quality for an exciting theater experience. * Digital Light Processing, DLP, Digital
  • Sharp DT 200 | DT-200 Operation Manual - Page 9
    Numbers next to the part names refer to the main pages in this manual where the topic is explained. Projector Front and Top View Lens shift dial 18 Zoom knob 16 Exhaust ventilative hole 4 DT-200 Focus ring 16 Remote control sensor 15 5 TEMPERATURE WARNING indicator 5 LAMP REPLACEMENT indicator
  • Sharp DT 200 | DT-200 Operation Manual - Page 10
    to the part names refer to the main pages in this manual where the topic is explained. Projector Side and Rear View RCA) INPUT 4 VIDEO terminal (RCA) 13 14 DIGITAL INPUT TYPE switch Attaching the Lens Cap DT-200 After putting the lens cap strap on the lens cap, pass the other end of the strap
  • Sharp DT 200 | DT-200 Operation Manual - Page 11
    Important Information Part Names Remote Control POWER buttons (ON/OFF) 16 KEYSTONE button 19 ENTER button 19 UNDO button 26 INPUT 1 button 24 INPUT 2 button 24 INPUT 4 button 24 AUTO SYNC button 35 RGB/COMP. button 36 Front View Top View 26 MENU button 19 ADJUSTMENT buttons 24 INPUT 3 button
  • Sharp DT 200 | DT-200 Operation Manual - Page 12
    Important Information Supplied Accessories Remote control RRMCGA088WJSA Two AA size batteries Power cord QACCDA007WJPZ Video cable QCNWGA001WJZZ Lens cap CCAPHA004WJ01 Lens cap strap UBNDT0013CEZZ Operation manual TINS-A287WJZZA E-11
  • Sharp DT 200 | DT-200 Operation Manual - Page 13
    Setup & Connections Connections Power Supply Connecting the Power Cord Plug the supplied power cord into the AC socket on the back of the projector. Power cord CAUTION • Make sure the power cord is firmly connected into the AC socket. • The projector will enter the standby mode as you re-plug it
  • Sharp DT 200 | DT-200 Operation Manual - Page 14
    Connecting to Video Equipment Projector Setup & Connections 1 1 S-video cable (commercially available) 2 To S-video output terminal Video cable 2 To video output terminal VCR, Laser disc player, DVD player or DTV decoder Connecting to a DVD Player and DTV Decoder Connecting to a DVD player
  • Sharp DT 200 | DT-200 Operation Manual - Page 15
    Setup & Connections Connecting to a DVD Player and DTV Decoder Connecting to a DTV decoder with DVI output 1 Slide the "DIGITAL INPUT TYPE" switch on the back terminal board to "VIDEO". 2 Connect the DVI cable to the DIGITAL INPUT terminal. 3 Connect the other end to the Corresponding terminal on
  • Sharp DT 200 | DT-200 Operation Manual - Page 16
    • A Macintosh adaptor may be required for use with some Macintosh computers. Contact your nearest Sharp Authorized Service Center or Dealer. Operating the Remote Control Remote Control 23Ј (7 m) 30˚ 45˚ 30 of the signal may differ due to the screen material. DT-200 45˚ 30˚ Remote Control E-15
  • Sharp DT 200 | DT-200 Operation Manual - Page 17
    ) to reduce lamp damage. Zooming and Focusing The picture can be zoomed in or out, and focused by the Zoom knob and the Focus ring. 1 DT-200 2 1 Slide the Zoom knob. The image can be adjusted to the desired size within the zoom range. 2 Rotate the Focus ring until the image on
  • Sharp DT 200 | DT-200 Operation Manual - Page 18
    Setting Up the Screen Using the Swivel Stand 1 You can adjust the angle and direction of the projected image by using the Swivel Stand. 1 Unlock the lever on the Swivel Stand. 2 Adjust the angle and direction of the projected image as you want by lifting up the projector and rotating the
  • Sharp DT 200 | DT-200 Operation Manual - Page 19
    Using the Lens Shift The picture can be adjusted within the shift range of the lens by rotating the lens shift dial on the top of the projector using your finger. Projector Projected Image Lens shift dial UP DOWN Setup & Connections E-18
  • Sharp DT 200 | DT-200 Operation Manual - Page 20
    Setup & Connections Keystone Correction This function can be used to adjust the Keystone settings. 1, 4 2, 3 • For details about using the menu screen, see page 26. Description of 2D Keystone Correction Selected item H Keystone V Keystone Reset Description Horizontally adjusts the keystone
  • Sharp DT 200 | DT-200 Operation Manual - Page 21
    Setup & Connections Placement of the Projected Image Using the Keystone Correction : Screen area Place the projector at a distance from the screen that allows images to be projected onto the screen by referring to "Adjusting the Projection Distance" on pages 21 and 22. 1 Project the test pattern
  • Sharp DT 200 | DT-200 Operation Manual - Page 22
    distance (b) Horizontal Placement range (d) Composite, S-video 480i/P, 1080i 720P RGB Ver tical placement range (f) 200" 26'11" (8.2 m) 8' 2" (2.5 m) 5'11" (1.8 m) 4' 7" (1.4 m) 5'11" (1.8 m) 22' 2" (6.8 m) 5' 3" (1.6 m) 3'11" (1.2 m) 2'11" (0.9 m) 4'11" (1.5 m) 9 150" 20' 1" (6.1 m) 5'11
  • Sharp DT 200 | DT-200 Operation Manual - Page 23
    Setup & Connections Adjusting the Projection Distance Upper and Lower Lens Shift Position • This projector is equipped with a lens shift function that lets you adjust the projection height. • Adjust it to match the setup configuration. • The screen can be moved maximum the length of one screen
  • Sharp DT 200 | DT-200 Operation Manual - Page 24
    the Swivel Stand. (See page 17 for removing and attaching the Swivel Stand.) • Before mounting the projector, contact your nearest Sharp Authorized Service Center or Dealer to obtain the recommended ceiling-mount bracket (commercially available). (AN-CM260 ceiling-mount bracket, AN-EP101B extension
  • Sharp DT 200 | DT-200 Operation Manual - Page 25
    Operation Buttons Using the Operation Buttons Selecting the Input Signal Source Press INPUT on the projector, INPUT 1, INPUT 2, INPUT 3, INPUT 4 or DIGITAL INPUT on the remote control to select the desired input mode. INPUT button • When no signal is received, "NO SIGNAL" will be displayed. When
  • Sharp DT 200 | DT-200 Operation Manual - Page 26
    Adjusting the Picture Aspect Ratio DVD / VIDEO Input Signal COMPUTER Image Type NORMAL Projects the image fully on a screen while maintaining the aspect ratio. Output screen image BORDER STRETCH Projects the image on Projects the image on the screen whose the screen whose upper
  • Sharp DT 200 | DT-200 Operation Manual - Page 27
    Using the Menu Screen Basic Operations This projector has two sets of menu screens that allow you to adjust the image and various projector settings. These menu screens can be operated from the projector or the remote control with the following procedure. 64 2, 3, 5 1, 7 On-screen Display
  • Sharp DT 200 | DT-200 Operation Manual - Page 28
    the INPUT 1 or 2 Mode Menu Bar Main menu Picture ( ) Sub menu Contrast Bright Color Tint ‫מ‬30 ‫ם‬30 ‫מ‬30 ‫ם‬30 ‫מ‬30 ‫ם‬30 ‫מ‬30 ‫ם‬30 Sharp ‫מ‬30 ‫ם‬30 Red Blue ‫מ‬30 ‫ם‬30 ‫מ‬30 ‫ם‬30 Reset CLR Temp 5500k 6500k 7500k 8500k 9300k 10500k Gamma Standard Black Detail White Detail
  • Sharp DT 200 | DT-200 Operation Manual - Page 29
    Main menu Picture ( ) Options ( ) Contrast ‫מ‬30 ‫ם‬30 Bright ‫מ‬30 ‫ם‬30 Color ‫מ‬30 ‫ם‬30 Tint ‫מ‬30 ‫ם‬30 Sharp ‫מ‬30 ‫ם‬30 Red ‫מ‬30 ‫ם‬30 Blue ‫מ‬30 ‫ם‬30 Reset CLR Temp 5500k 635D0P0rkogressive 37D50P0rkogressive 38D50P0rkogressive 39D30P0rkogressive 31D05P0r0okgressive
  • Sharp DT 200 | DT-200 Operation Manual - Page 30
    Items Selected item button button Contrast Brightness Color Tint Sharp Red Blue CLR Temp Gamma White Emphasis Picture Setting Reset adjustment items are returned to the factory preset settings. • "Color", "Tint" and "Sharp" do not appear for RGB input in INPUT 2 mode. • For details on "Gamma
  • Sharp DT 200 | DT-200 Operation Manual - Page 31
    Adjusting the Picture 4 2, 3 1, 5 On-screen Display 2, 3 1, 4 On-screen Display Adjusting the Color Temperature This function allows for selecting the desired color temperature from six settings. With the lower value selected, the projected image becomes warmer, reddish and incandescent-like
  • Sharp DT 200 | DT-200 Operation Manual - Page 32
    Adjusting the Picture 4 2, 3 1, 5 On-screen Display Standard Black Detail Brighten White Detail Gamma Correction Function Gamma is an image quality enhancement function. Four gamma settings are available to allow for differences in the brightness of the room. Description of Gamma Modes
  • Sharp DT 200 | DT-200 Operation Manual - Page 33
    Adjusting the Picture 1 4 2, 3 1, 5 On-screen Display Picture Setting Function This function stores all items set in "Picture". Five settings can be stored separately in "Memory 1" to "Memory 5". Each stored setting is reassigned to each input mode (INPUT 1 to INPUT 4 and DIGITAL). Even when the
  • Sharp DT 200 | DT-200 Operation Manual - Page 34
    Adjusting the Computer and DVD/DTV Images 2,3,4 1, 5 When displaying computer patterns which are very detailed (tiling, vertical stripes, etc.), interference may occur between the DMD pixels, causing flickering, vertical stripes, or contrast irregularities in portions of the screen. Should this
  • Sharp DT 200 | DT-200 Operation Manual - Page 35
    Adjusting the Computer and DVD/DTV Images 2,3,4 1, 6 5 On-screen Display Special Modes Adjustment Ordinarily, the type of input signal is detected and the correct resolution mode is automatically selected. However, for some signals, the optimal resolution mode in "Special Modes" on the "Fine Sync"
  • Sharp DT 200 | DT-200 Operation Manual - Page 36
    / to select "ON" or "OFF". 5 To exit the menu screen, press MENU. • When the optimum image cannot be achieved with Auto Sync adjustment, use manual adjustments. (See page 33.) • The Auto Sync adjustment may take some time to complete, depending on the image of the computer connected to the projector
  • Sharp DT 200 | DT-200 Operation Manual - Page 37
    Turning On/Off the On-screen Display 2,3,4 1, 5 On-screen Display This function allows you to turn on or off the on-screen messages that appear during input select. Description of OSD Display Selected item ON ( ) OFF ( ) Description All On-screen Display are displayed. INPUT is not displayed. 1
  • Sharp DT 200 | DT-200 Operation Manual - Page 38
    Setting the Video Signal (VIDEO menu only) 2,3,4 1, 6 5 On-screen Display The video input system mode is preset to "Auto"; however, it can be changed to a specific system mode if the selected system mode is not compatible with the connected audiovisual equipment. 1 Press MENU. The "Picture" menu
  • Sharp DT 200 | DT-200 Operation Manual - Page 39
    Adjustments for the Screen Position and Size 2,3,4 1, 5 On-screen Display You can adjust settings according to the position and size of the screen. Description of Adjustment Items Selected item Digital Shift Subtitle Reset Description Adjusts the vertical position of the image. Adjusts the
  • Sharp DT 200 | DT-200 Operation Manual - Page 40
    Adjustments for the Screen Position and Size 2,3,4 1, 5 On-screen Display Subtitle Setting With this function, you can adjust the vertical size of the display to allow for subtitles. Description of Subtitle Setting button button The image is compressed by The image is enlarged by adjusting the
  • Sharp DT 200 | DT-200 Operation Manual - Page 41
    Selecting the Menu Screen Position 2,3,4 1, 6 5 On-screen Display This function allows you to select the desired position of the menu screen. Description of Menu Position Selected item Description Center The menu is displayed on the center of the image. Upper Right The menu is displayed on
  • Sharp DT 200 | DT-200 Operation Manual - Page 42
    Automatic Power Shut-off Function 2,3,4 1, 5 When no input signal is detected for more than 15 minutes, the projector will automatically shut off. The on-screen message on the left will appear five minutes before the power is automatically turned off. Description of Automatic Power Shut-off
  • Sharp DT 200 | DT-200 Operation Manual - Page 43
    Reversing/Inverting Projected Images 2,3 4 1, 5 On-screen Display This projector is equipped with a reverse/invert image function which allows you to reverse or invert the projected image for various applications. Description of Projected Images Selected item Description Front Front‫ם‬
  • Sharp DT 200 | DT-200 Operation Manual - Page 44
    that warns you when to change the lamp. • If a problem occurs, either the TEMPERATURE WARNING indicator or the LAMP REPLACEMENT indicator . (See page 48.) • Take the projector to your nearest Sharp Authorized Service Center or Dealer for repair. • Carefully replace the lamp. ( Troubleshooting E-43
  • Sharp DT 200 | DT-200 Operation Manual - Page 45
    On-screen Display Maintenance & Troubleshooting Condition The LAMP REPLACEMENT indicator of the image, and the power will turn off. Problem • Lamp has been used for over 2,400 hours. • current type BQC-XVZ90+++1 from your nearest Sharp Authorized Service Center or Dealer. • Replace the lamp
  • Sharp DT 200 | DT-200 Operation Manual - Page 46
    for repair. Purchase a replacement lamp unit (lamp/cage module) of the current type BQC-XVZ90+++1 from your nearest Sharp Authorized Service Center or Dealer. Then carefully change the lamp by following the instructions on the next page. If you wish, you may have the lamp replaced at your nearest
  • Sharp DT 200 | DT-200 Operation Manual - Page 47
    Press POWER OFF. Wait until the cooling fan stops running. DT-200 4 5 Loosen the user service screw that secures the Slide the lamp cage cover in the direction Loosen and remove the three-securing screws from the lamp cage. User service screws 7 8 9 Remove the lamp cage. Insert the new lamp
  • Sharp DT 200 | DT-200 Operation Manual - Page 48
    POWER ON on the projector to reset the lamp timer. Press , , , , order. Then press . and in DT-200 "LAMP 0000H" is displayed on the screen. • You need to reset the lamp timer every time you replace the lamp and confirm it is reset on the "Lamp Timer" menu. Maintenance & Troubleshooting E-47
  • Sharp DT 200 | DT-200 Operation Manual - Page 49
    putting the cleaner hose on the intake ventilative holes. Intake ventilative holes Bottom view Cleaner hose Intake ventilative holes Swivel stand Intake ventilative holes Maintenance & Troubleshooting E-48
  • Sharp DT 200 | DT-200 Operation Manual - Page 50
    that came with the system for instructions on how to use it to secure the projector. Troubleshooting Problem No picture appears. Check • signal type. (See page 36.) Service Information (For the U.S.) For the location of the nearest Sharp Authorized Service Center, or to obtain product literature
  • Sharp DT 200 | DT-200 Operation Manual - Page 51
    Connecting Pin Assignments DVI-I (INPUT 2 / DIGITAL INPUT) port : 29 pin connector 9 ~ 16 1 2 7 8 17 24 18 23 • DVI Digital INPUT Pin No. Signal Pin No. Signal 1 T.M.D.S data 2- 16 Hot plug detection 2 T.M.D.S data 2+ 17 T.M.D.S data 0- 3 T.M.D.S data 2 shield 18 T.M.D.S data 0+ C1
  • Sharp DT 200 | DT-200 Operation Manual - Page 52
    832 ‫ ן‬624 49.6 75 48.4 60 ✔ XGA 1,024 ‫ ן‬768 60.0 75 ✔ DVI Support Display Upscale True ✔ ✔ Intelligent Compression Upscale Intelligent Compression Appendix • This projector may not be able to change display modes can be found in your notebook computer's operation manual. E-51
  • Sharp DT 200 | DT-200 Operation Manual - Page 53
    Dimensions Rear View Side View Top View Side View 12 7/8 (327) (153.8) Appendix 4 5/8 (118) Front View Bottom View 14 1/2 (368) 6 9/ 1 6 Units: inches (mm) E-52
  • Sharp DT 200 | DT-200 Operation Manual - Page 54
    Specifications Product type Projector Model DT-200 Video system PAL/PAL 60/PAL-M/PAL-N/SECAM/NTSC 3. cable (QCNWGA001WJZZ), Lens cap (CCAPHA004WJ01), Lens cap strap (UBNDT0013CEZZ), Operation manual (TINS-A287WJZZA) This SHARP projector uses a DMD chip. This very sophisticated chip contains 480,000
  • Sharp DT 200 | DT-200 Operation Manual - Page 55
    image is NORMAL, BORDER, or STRETCH of COMPUTER, VIDEO and DTV inputs. DVI (Digital Visual Interface) Display digital interface that also supports Analog interfaces. GAMMA Image quality enhancement function that offers a richer image by brightening the darker portions of the image without altering
  • Sharp DT 200 | DT-200 Operation Manual - Page 56
    Index A AC socket 12 ADJUSTMENT buttons 26 Adjusting the Picture 29 Aspect ratio 24 Automatic power shut-off function 41 Auto sync adjustment 35 AUTO SYNC button 35 B Background 37 C Ceiling-mount 22 Clock 33 COMPONENT terminals 13 D Digital shift 38 DVI 14 E ENTER button 26 Exhaust
  • Sharp DT 200 | DT-200 Operation Manual - Page 57
    Service) Your Product Model Number & Description: DT-200 Projector (Be sure to have this information available when you need service Sharp Authorized Servicer, call Sharp toll free at 1800-BE-SHARP. Contact your Sharp Authorized Servicer to obtain in-home service for this Product. The Servicer
  • Sharp DT 200 | DT-200 Operation Manual - Page 58
    installation or inappropriate use as outlined in the owner's manual. (b) Any Sharp product tampered with, modified, adjusted or repaired by any party other than Sharp, Sharp's Authorized Service Centres or Sharp's Authorized Servicing Dealers. (c) Damage caused or repairs required as a result of
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
OPERATION MANUAL
MODE D’EMPLOI
MANUAL DE OPERACION
MANUAL DE OPERAÇÃO
DT
-
200
PROJECTOR
PROJECTEUR
PROYECTOR
PROJETOR
DT-200
ENGLISH
FRANÇAIS
ESPAÑOL
PORTUGUÊS