Sharp HN-VA100U HNVA100U|HNVA400U Operation Manual

Sharp HN-VA100U Manual

Get Sharp HN-VA100U PDF manuals and user guides View all Sharp HN-VA100U manuals
Add to My Manuals
Save this manual to your list of manuals

Sharp HN-VA100U manual content summary:

  • Sharp HN-VA100U | HNVA100U|HNVA400U Operation Manual - Page 1
    MODEL HN-VA400U HN-VA100U PowerLine Ethernet Adapter OPERATION MANUAL
  • Sharp HN-VA100U | HNVA100U|HNVA400U Operation Manual - Page 2
    and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there radio/TV technician for help. Declaration of Conformity SHARP PowerLine Ethernet Adapter, HN-VA400U and HN-VA100U This device complies with Part 15 of FCC rules
  • Sharp HN-VA100U | HNVA100U|HNVA400U Operation Manual - Page 3
    Introduction 2 Unpacking Checklist 3 Safety Information 3 Electrical Interference Information 4 Network Security 5 A Look at the PLC Adapter 6 Registering the Adapter 8 Installing the Adapter 10 Troubleshooting 13 Indicators on the PLC adapter 16 Canceling the Registration of the
  • Sharp HN-VA100U | HNVA100U|HNVA400U Operation Manual - Page 4
    SHARP PLC (PowerLine Communication) adapter. ♦This additional adapter can only be used with a previously installed SHARP HN-VA401SU PLC adapter kit. It cannot be used by itself. PLC adapters let you use the existing electrical wiring in your house to create a home network. Simply plug the adapters
  • Sharp HN-VA100U | HNVA100U|HNVA400U Operation Manual - Page 5
    Checklist HN-VA100U LAN POWER Unpacking Checklist HN-VA400U LAN1 LAN2 LAN3 LAN4 POWER Operation manual LAN cable: 59.1" (1.5 m) (Part order number: QCNWG337DXHZZ) Safety Information Do not disassemble the adapter or attempt any procedures not described in this manual. Refer all servicing to
  • Sharp HN-VA100U | HNVA100U|HNVA400U Operation Manual - Page 6
    . Keep at least 4 inches free around the sides and top of the adapter to allow air circulation and cooling. 4 inches 4 inches Electrical Interference Information Devices that may interfere with the powerline network Cell phone chargers, battery chargers, vacuums, power tools, hair dryers, and other
  • Sharp HN-VA100U | HNVA100U|HNVA400U Operation Manual - Page 7
    ♦The procedure for registering the additional adapter on your PLC network is explained on page 8. ♦In the event that you transfer one of your adapters to another person or send an adapter out for service, it is recommended that you cancel the registration of the adapter (see page 18). ♦If you lose
  • Sharp HN-VA100U | HNVA100U|HNVA400U Operation Manual - Page 8
    A Look at the PLC Adapter A Look at the PLC Adapter Front 1 4 POWER 23 1 SET button This button is used to register the adapter on the network. (The SET button is also used to cancel the network registration of the adapter.) 2 POWER indicator This lights green when the power is on (see page
  • Sharp HN-VA100U | HNVA100U|HNVA400U Operation Manual - Page 9
    Rear HN-VA100U A Look at the PLC Adapter HN-VA400U LAN LAN1 LAN2 LAN3 LAN4 5 5 LAN ports Connect network devices such as a computer, router, and TV to these ports using LAN cables. (One LAN cable is provided with your additional adapter; please purchase additional cables separately as
  • Sharp HN-VA100U | HNVA100U|HNVA400U Operation Manual - Page 10
    be used until it is registered. ♦Up to 16 adapters can be used on one network. 1 Plug the additional adapter into an outlet next to one of your existing (previously registered) adapters. • Check the PLC indicator on the existing adapter and make sure it is solidly lit or blinking (registration
  • Sharp HN-VA100U | HNVA100U|HNVA400U Operation Manual - Page 11
    on the network may stop temporarily. Registration may take up to 30 seconds. • Important: Do not remove either adapter from the POWER indicator on both adapters will stop blinking and the PLC indicator on both adapters will light solidly or blink. Remove the additional adapter from the outlet and
  • Sharp HN-VA100U | HNVA100U|HNVA400U Operation Manual - Page 12
    has its own surge protection.) • The POWER indicator on the adapter will blink orange and green while the adapter starts up. Do not plug the adapter into the same outlet as another AC adapter or charger Do not plug the adapter into a power strip with a built-in noise filter Do not plug the
  • Sharp HN-VA100U | HNVA100U|HNVA400U Operation Manual - Page 13
    sure that the PLC indicator on the adapter lights steady green or blinks green. This indicates that the adapter is able to communicate. POWER 3 Insert one end of the LAN cable into the LAN port on the device (router, computer, network TV, etc.) that you wish to connect to the adapter, and insert the
  • Sharp HN-VA100U | HNVA100U|HNVA400U Operation Manual - Page 14
    LAN ♦The maximum distance (length of power line) over which PLC adapters can communicate is about 492 ft. (150 m). However, this slower speeds. If you find that communication is not satisfactory, try plugging the adapter into a different outlet. ♦Communication may be slow or impossible on some
  • Sharp HN-VA100U | HNVA100U|HNVA400U Operation Manual - Page 15
    If you have any problems with the adapter, first refer to the following troubleshooting guide. If you cannot solve the problem, call 1-800-BE-SHARP. Problem Solution The POWER indicator is off even though the adapter is plugged into an outlet. • Make sure that the adapter is plugged into
  • Sharp HN-VA100U | HNVA100U|HNVA400U Operation Manual - Page 16
    connected to one of the PLC adapters. No special settings are required to connect to the Internet through the PLC network, however, your computers and router must be correctly set to access the Internet (check with your Internet service provider). Network communication is slow or intermittent
  • Sharp HN-VA100U | HNVA100U|HNVA400U Operation Manual - Page 17
    -BE-SHARP. Other devices such as • Try plugging the appliance into a different touch lights or dimmers do outlet. Use the appliance as far away as not operate correctly. possible from the PLC adapters. The PLC indicator blinks even though no data is being sent over the network. • The adapters
  • Sharp HN-VA100U | HNVA100U|HNVA400U Operation Manual - Page 18
    blinks > Registration of the adapter failed (see page 9). OFF... PLC indicator The PLC indicator indicates both the status of PLC communication and the communication speed. Communication status ON Blinking OFF Communication is possible. The adapter is communicating on the network (the interval of
  • Sharp HN-VA100U | HNVA100U|HNVA400U Operation Manual - Page 19
    PLC adapter Green Orange Red The adapters are able to communicate at a speed of 30 Mbps or higher. The adapters are able to communicate at a speed of 10 to 30 Mbps. The adapters between adapters. It is not the effective speed between computers on the network. If more than two adapters are
  • Sharp HN-VA100U | HNVA100U|HNVA400U Operation Manual - Page 20
    to discard or give the adapter to someone else, or have the adapter serviced. ♦If you suspect that someone is using an adapter to gain unauthorized access to your network, cancel the registration of all adapters on your network and then re-register the adapters. Note: Perform the following steps
  • Sharp HN-VA100U | HNVA100U|HNVA400U Operation Manual - Page 21
    and thus is commonly used for general communication. *2 Measured using FTP from a Windows® PC to a Linux® server. *3 The maximum number of adapters is a recommended value. As the number of PLC adapters and other devices connected to the network increases, the communication speed slows. 19
  • Sharp HN-VA100U | HNVA100U|HNVA400U Operation Manual - Page 22
    consumption Dimensions (W x H x D) Weight Operating temperature Humidity HN-VA100U: 1 port HN-VA400U: 4 ports 120 V AC, 60 Hz HN-VA100U: 4.4 W maximum HN-VA400U: 5.0 W maximum 118 mm x 42 mm x 91 mm (excluding protrusions) HN-VA100U: 340 g (approx.) HN-VA400U: 350 g (approx.) 0° - 40°C 25% - 85
  • Sharp HN-VA100U | HNVA100U|HNVA400U Operation Manual - Page 23
    ; in such state the limits herein may not apply. Your Product: PowerLine Ethernet Adapter Warranty Period for this Product: One year parts and labor from date of purchase. Where to obtain service: At a Sharp Authorized Servicer located in the United States. To find out the location of the
  • Sharp HN-VA100U | HNVA100U|HNVA400U Operation Manual - Page 24
    .com SHARP CORPORATION FOR YOUR RECORDS Please record the model number and serial number below, for easy reference, in case of loss or theft. These numbers are located on the rear side of the unit. Space is also provided for other relevant information. Model Number HN-VA400U / HN-VA100U Serial
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
PowerLine Ethernet
Adapter
OPERATION MANUAL
MODEL
HN-VA400U
HN-VA100U