Sharp PG-D2870W PG-D2870W PG-D3050W PG-D3550W Operation Manual
Sharp PG-D2870W Manual
![]() |
UPC - 074000374003
View all Sharp PG-D2870W manuals
Add to My Manuals
Save this manual to your list of manuals |
Sharp PG-D2870W manual content summary:
- Sharp PG-D2870W | PG-D2870W | PG-D3050W | PG-D3550W Operation Manual - Page 1
Introduction Easy Start Setup Connections DATA PROJECTOR MODEL PG-D3550W PG-D3050W PG-D2870W OPERATION MANUAL PG-D3550W/PG-D3050W Basic Operation Useful Features Appendix - Sharp PG-D2870W | PG-D2870W | PG-D3050W | PG-D3550W Operation Manual - Page 2
IMPORTANT • For your assistance in reporting the loss or theft of your Projector, please record the Model and Serial Number located on the bottom of the projector and retain this information. • Before recycling the packaging, please ensure that you have checked the contents of the carton thoroughly - Sharp PG-D2870W | PG-D2870W | PG-D3050W | PG-D3550W Operation Manual - Page 3
plug incorporating a 10A fuse. Should the fuse need to be replaced, a BSI or ASTA approved BS 1362 fuse marked or and of an appropriate plug to the mains lead, follow the instructions below: WARNING: THIS APPARATUS MUST BE EARTHED. IMPORTANT SHARP ELECTRONICS (Europe) GmbH Sonninstraße 3, - Sharp PG-D2870W | PG-D2870W | PG-D3050W | PG-D3550W Operation Manual - Page 4
read through the operation instructions before operating the projector. Die mitgelieferte CD-ROM des Projektors sorgfältig durch. Le CD-ROM fourni contient les instructions de las instrucciones de operación antes de utilizar el proyector. Il CD-ROM in dotazione contiene istruzioni per - Sharp PG-D2870W | PG-D2870W | PG-D3050W | PG-D3550W Operation Manual - Page 5
manual carefully. Introduction ENGLISH There are two important reasons for prompt warranty registration of your new SHARP Projector, using the REGISTRATION CARD packed with the projector. 1. WARRANTY This is to assure that you immediately receive the full benefit of the parts, service - Sharp PG-D2870W | PG-D2870W | PG-D3050W | PG-D3550W Operation Manual - Page 6
manual, instructions described on pages 60 to 62. * If you wish, you may have the lamp replaced at your nearest Sharp Authorized Projector Dealer or Service Center. * If the new lamp does not light after replacement, take your projector to the nearest Sharp Authorized Projector Dealer or Service - Sharp PG-D2870W | PG-D2870W | PG-D3050W | PG-D3550W Operation Manual - Page 7
from the actual display. The examples used throughout this manual are based on the PG-D3550W/PG-D3050W model. Using the Menu Screen Select from projector. Note ....... Indicates additional information for setting up and operating the projector. For Future Reference Maintenance Troubleshooting - Sharp PG-D2870W | PG-D2870W | PG-D3050W | PG-D3550W Operation Manual - Page 8
18 Video Setup 18 Setting Up the Projector 18 Standard Setup (Front Projection 18 Screen Size and Projection Distance ...... 19 Projection (PRJ) Mode 20 Ceiling-Mount Setup 20 Connections Connecting the Projector to Other Equipment 21 Controlling the Projector by a Computer 24 Connecting the - Sharp PG-D2870W | PG-D2870W | PG-D3050W | PG-D3550W Operation Manual - Page 9
58 Regarding the Lamp 60 Lamp 60 Caution Concerning the Lamp 60 Replacing the Lamp 60 Removing and Installing the Lamp Unit 61 Resetting the Lamp Timer 62 Storing the Projector 63 How to Use the Storage Case 63 Compatibility Chart 64 Troubleshooting 65 For SHARP Assistance 67 Speci - Sharp PG-D2870W | PG-D2870W | PG-D3050W | PG-D3550W Operation Manual - Page 10
servicing. 1. Read Instructions All the safety and operating instructions should be read before the product is operated. 2. Retain Instructions The safety and operating instructions Any mounting of the product should follow the manufacturer's instructions, and should use a mounting accessory - Sharp PG-D2870W | PG-D2870W | PG-D3050W | PG-D3550W Operation Manual - Page 11
20. Safety Check Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine that the product is in proper operating condition. 21. Wall or Ceiling Mounting This product should be mounted to a wall or ceiling only as recommended by the - Sharp PG-D2870W | PG-D2870W | PG-D3050W | PG-D3550W Operation Manual - Page 12
hazard of glass particles if lamp ruptures. In case of lamp rupture, contact your nearest Sharp Authorized Projector Dealer or Service Center for replacement. See "Regarding the Lamp" on page 60. Caution concerning the setup of the projector ■ For minimal servicing and to maintain high image - Sharp PG-D2870W | PG-D2870W | PG-D3050W | PG-D3550W Operation Manual - Page 13
manuals of the projector and the equipment to be connected for instructions on how to make the connections. Using the projector , the lamp will turn off, the cooling fan will run and then the projector will enter WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTIES - Sharp PG-D2870W | PG-D2870W | PG-D3050W | PG-D3550W Operation Manual - Page 14
click the pdf file to access the projector manuals. When you want to view the SETUP MANUAL 1) Double Projector Using the PJLinkTM Protocol 10 Setting up the Projector Network Environment 11 Controlling the Projector via LAN 17 Resetting the Lamp Timer of the Projector via LAN 22 Troubleshooting - Sharp PG-D2870W | PG-D2870W | PG-D3050W | PG-D3550W Operation Manual - Page 15
manuals (this manual , OPERATION MANUAL FOR STEREOSCOPIC 3D PROJECTION and CD-ROM ) Note • Codes in "< >" are Replacement parts codes. Optional accessories ■ Lamp unit ■ Ceiling-mount adaptor ■ Ceiling-mount bracket ■ Ceiling-mount unit ■ Ceiling-mount - Sharp PG-D2870W | PG-D2870W | PG-D3050W | PG-D3550W Operation Manual - Page 16
manual where the topic is explained. 1 10 2 11 3 12 16 13 14 17 45 6 7 89 PG-D2870W 15 18 3 19 Front View 1 Exhaust vent 57 2 Zoom ring (except PG-D2870W 58 11 Lamp indicator 58 12 Power indicator 58 13 STANDBY/ON button 26 For turning the power on and putting the projector into - Sharp PG-D2870W | PG-D2870W | PG-D3050W | PG-D3550W Operation Manual - Page 17
terminal 25 Terminal for controlling the projector using a computer via network. 2 RS-232C terminal 24 Terminal for controlling the projector using a computer. 3 USB foot 28 15 Security bar Using the Kensington Lock • This projector has a Kensington Security Standard connector for use with a - Sharp PG-D2870W | PG-D2870W | PG-D3050W | PG-D3550W Operation Manual - Page 18
manual where the topic is explained. 1 2 3 14 4 15 5 16 6 7 17 8 18 9 19 10 20 11 21 12 22 13 23 1 ON button 26 For turning the power on. 2 STANDBY button 26 For putting the projector the lamp life. 3D MODE button See the OPERATION MANUAL FOR STEREOSCOPIC 3D PROJECTION - Sharp PG-D2870W | PG-D2870W | PG-D3050W | PG-D3550W Operation Manual - Page 19
The batteries included with this projector may run down in a short period, depending on how they are kept. Be sure to replace them as soon as possible with control may malfunction under a fluorescent lamp. In this case, move the projector away from the fluorescent lamp. 30° 33 n (10 m) Remote - Sharp PG-D2870W | PG-D2870W | PG-D3050W | PG-D3550W Operation Manual - Page 20
for each step. Setup and Projection In this section, connection of the projector and the computer is explained using PG-2870W) 4 Focus ring 5 Adjustment 6 buttons (P/R/O/Q) 4 HEIGHT ADJUST lever 5 KEYSTONE button 1. Place the projector facing a wall or a screen BP. 18 2.Connect the projector - Sharp PG-D2870W | PG-D2870W | PG-D3050W | PG-D3550W Operation Manual - Page 21
4. Adjust the projected image with the Setup Guide 1 After the projector turns on, the Setup Guide appears. (When "Setup Guide" is set to "On". See page 49.) 2 Follow the steps in the Setup Guide and adjust the focus, height (angle) and picture size. 3 After adjusting the focus, height (angle) and - Sharp PG-D2870W | PG-D2870W | PG-D3050W | PG-D3550W Operation Manual - Page 22
Setting Up the Projector For optimal image quality, position the projector perpendicular to the screen with the projector's feet flat ×m"4) 04 cm) cm) Projection Distance 3'1(10."2-m4'-81".4 m)9'8(2"-.91m1'-83".6 m)19'(54."9-m23-'75."1 m)28'(81.18 "m-3-51'01.7" m) [PG-D2870W] Picutre Size 150" ( - Sharp PG-D2870W | PG-D2870W | PG-D3050W | PG-D3550W Operation Manual - Page 23
cm (1 39/64") 3 cm (1 3/8") - When using the projector with screen sizes not listed in the above charts, calculate the values according to the formulas. PG-D3550W/ PG-D3050W PG-D2870W L1: Minimum projection distance (m/ft) L2: Maximum projection distance (m/ft) H: Distance from the lens center to - Sharp PG-D2870W | PG-D2870W | PG-D3050W | PG-D3550W Operation Manual - Page 24
, rear projection (with a translucent screen) [Menu item ➞ "Ceiling + Rear"] aCeiling-Mount Setup It is recommended that you use the optional Sharp ceiling-mount adaptor and unit for this installation. Before mounting the projector, contact your nearest Sharp Authorized Projector Dealer or Service - Sharp PG-D2870W | PG-D2870W | PG-D3050W | PG-D3550W Operation Manual - Page 25
does not support all connections compatible with the projector. Use with projected unless the computer's external output port is switched on (e.g. Press "Fn" and "F5" keys simultaneously when using a SHARP notebook computer). Refer to the specific instructions in your computer's operation manual - Sharp PG-D2870W | PG-D2870W | PG-D3050W | PG-D3550W Operation Manual - Page 26
connecting the external equipment. (See page 52.) • When you connect video equipment with a 21-pin RGB output (Euro-scart) to the projector, use a commercially available cable that fits in the projector terminal you want to connect. • The projector does not support RGBC signals via the Euro-scart. 22 - Sharp PG-D2870W | PG-D2870W | PG-D3050W | PG-D3550W Operation Manual - Page 27
available or available terminal as Sharp service part QCNWGA038WJPZ) Terminal on the projector AUDIO 1 RCA audio output terminal be output. This projector is able to process the following signals when connected to HDMI equipment: • Video signal: For details, see "Digital Support" in the list - Sharp PG-D2870W | PG-D2870W | PG-D3050W | PG-D3550W Operation Manual - Page 28
an RS-232C serial control cable (cross type, commercially available), the computer can be used to control the projector and check the status of the projector. Refer to the "SETUP MANUAL" contained on the supplied CD-ROM for "RS-232C Specifications and Commands". When connecting to a computer using - Sharp PG-D2870W | PG-D2870W | PG-D3050W | PG-D3550W Operation Manual - Page 29
Category 5 (CAT.5) type cable (commercially available). Connections Connecting the Power Cord Plug the supplied power cord into the AC socket on the rear of the projector. Then plug into AC outlet. Power cord (supplied) AC socket To AC outlet 25 - Sharp PG-D2870W | PG-D2870W | PG-D3050W | PG-D3550W Operation Manual - Page 30
. Note • About the Lamp Indicator The lamp indicator illuminates to indicate the status of the lamp. Green: The lamp is on. Blinking in green: The lamp is warming up. Red: The lamp is shut down abnormally or the lamp should be replaced. • When switching on the projector, a slight flickering of - Sharp PG-D2870W | PG-D2870W | PG-D3050W | PG-D3550W Operation Manual - Page 31
" to "Off". (See page 49.) * The PG-D2870W model is not equipped with the ZOOM function. Setup Guide screen (e.g. PG-D3550W/PG-D3050W) ENTER button Adjusting the Projected Image 1 Adjusting the Focus You can adjust the focus with the focus ring on the projector. Rotate the focus ring to adjust the - Sharp PG-D2870W | PG-D2870W | PG-D3050W | PG-D3550W Operation Manual - Page 32
the projector. When the screen is above the projector, the projection image can be made higher by adjusting the projector. 1 Lift the projector to 3 Adjusting the Picture Size (except PG-D2870W) You can adjust the picture size using the zoom ring on the projector. Rotate the zoom ring to enlarge or - Sharp PG-D2870W | PG-D2870W | PG-D3050W | PG-D3550W Operation Manual - Page 33
Correcting Trapezoidal Distortion When the image is projected either from the top or from an angle of approximately ±40 (PG-D3550W/ D3050W)/±XX (PG-D2870W) degrees and the screen can also be set up to an angle of approximately ±40 (PG-D3550W/D3050W)/ ±XX (PG-D2870W) degrees (When the Resize mode - Sharp PG-D2870W | PG-D2870W | PG-D3050W | PG-D3550W Operation Manual - Page 34
display a black screen and turn off the sound. Note • Pressing AV MUTE again will turn the projected image back on. • When you close the lens shutter, the projector will be set to AV Mute mode and then the projector will be turned off automatically after about 30 minutes. 30 On-screen display - Sharp PG-D2870W | PG-D2870W | PG-D3050W | PG-D3550W Operation Manual - Page 35
× 768 1366 × 768 16:9 aspect ratio *1 1280 × 768 15:9 aspect ratio 1280 × 800 16:10 aspect ratio : Cutout area on which images cannot be projected : Area where the signals are off screen *1 The Image Shift function can be used for these images. *2 Same as NORMAL mode. *3 In case SXGA+ input - Sharp PG-D2870W | PG-D2870W | PG-D3050W | PG-D3550W Operation Manual - Page 36
1080I, 1080P *1 16:9 aspect ratio *1 16:9 aspect ratio 540P *1 16:9 aspect ratio (4:3 aspect ratio in 16:9) : Cutout area on which images cannot be projected : Area on which the image is not included in the original signals *1 The Image Shift function can be used for these images. *2 Same as - Sharp PG-D2870W | PG-D2870W | PG-D3050W | PG-D3550W Operation Manual - Page 37
timer display function Press BREAK TIMER. Note • The Break Timer is not available while the projector is operating the following functions. - Auto Sync - Freeze - AV Mute - Input Search consumption will decrease, and the lamp life will extend. Note • Refer to "Eco+Quiet" on page 44 for details. 33 - Sharp PG-D2870W | PG-D2870W | PG-D3050W | PG-D3550W Operation Manual - Page 38
function works when detecting input signal after the projector turns on. Press AUTO SYNC to manually adjust with Auto Sync function. Note • When Selecting the Picture Mode You can select the appropriate Picture mode for the projected image, such as movie or video game. Press PICTURE MODE. • When - Sharp PG-D2870W | PG-D2870W | PG-D3050W | PG-D3550W Operation Manual - Page 39
projector with the remote control. For details, see the operation manual of the receiver. Connecting with a USB cable Computer To USB terminal Remote receiver To USB terminal (optional, AN-MR2) or USB cable (commercially available or available as Sharp service Mac OS® that support USB. • - Sharp PG-D2870W | PG-D2870W | PG-D3050W | PG-D3550W Operation Manual - Page 40
shows the items that can be set in the projector. "Quick Start Menu" Main menu Quick Start PG-D2870W. "Picture" menu Main menu Picture Page 42 Picture Mode Page 42 Sub menu Standard Presentation Movie Game sRGB *3 Contrast -30 +30 Bright -30 +30 Color -30 +30 *4 Tint -30 +30 *4 Sharp - Sharp PG-D2870W | PG-D2870W | PG-D3050W | PG-D3550W Operation Manual - Page 41
OSD Display [On/Off] Page 48 Closed Caption Page 48 Background Page 49 Setup Guide [On/Off] Page 49 Sub menu Normal Full Native Area Zoom V-Stretch 16:9 49 Wall Color Page 49 Language Page 49 Front Ceiling + Front Rear Ceiling + Rear Off Blackboard Whiteboard English Deutsch Español Nederlands - Sharp PG-D2870W | PG-D2870W | PG-D3050W | PG-D3550W Operation Manual - Page 42
STANDBY Mode Page 53 STANDBY Audio Out [On/Off] Page 53 DLP® LinkTM [On/Off] Page 53 DLP® LinkTM Invert Page 53 All Reset Page 53 Lamp Timer (Life) Page 53 Sub menu Input Monitor Output Input Search Restart Network Page 55 IP Address Page 56 MAC Address Page 56 Projector Page 56 Link Page 56 38 - Sharp PG-D2870W | PG-D2870W | PG-D3050W | PG-D3550W Operation Manual - Page 43
when the menu is displayed. MENU button Menu Selections (Quick Start Menu) • This operation can also be performed by using the buttons on the projector. 1 Press MENU. • The "Quick Start Menu" screen for the selected Input mode is displayed. 2 Press P or R to select the desired item, then press - Sharp PG-D2870W | PG-D2870W | PG-D3050W | PG-D3550W Operation Manual - Page 44
search. Manually change the projecting images at an angle to the screen. (See page 47.) When set to "On", this function reduces the cooling fan noise and power consumption, thereby prolonging the operating life of the lamp performed by using the buttons on the projector. 1 Press MENU. • The "Quick - Sharp PG-D2870W | PG-D2870W | PG-D3050W | PG-D3550W Operation Manual - Page 45
0 0 1 On Level 2 Off Single ADJ END Items to be adjusted To adjust the projected image while watching it Press ENTER. • The selected item (e.g. "Bright") is displayed by button is not available while the projector is operating: - Auto Sync/Break Timer/Freeze/AV Mute/Input Search Useful - Sharp PG-D2870W | PG-D2870W | PG-D3050W | PG-D3550W Operation Manual - Page 46
image Presentation Brightens portions of image for more enhanced presentations. Movie Game *sRGB Gives natural tint to the projected image. Gives sharpness to the projected image. For high fidelity reproduction of images from a computer. The default settings of each item when selecting Picture - Sharp PG-D2870W | PG-D2870W | PG-D3050W | PG-D3550W Operation Manual - Page 47
making the effect weaker. Q button For more contrast. For more brightness. For more color intensity. For making skin tones greenish. For more sharpness. For stronger red. For stronger blue. For making the effect stronger. *1 Not displayed in the RGB input mode. *2 Not adjustable/selectable when - Sharp PG-D2870W | PG-D2870W | PG-D3050W | PG-D3550W Operation Manual - Page 48
Note • When "Eco+Quiet" is set to "On", the fan sound and power consumption are lower than they are when "Off" is selected. (Projection brightness decreases as shown in the chart.) 6 Reducing Image Noise (DNR) Video digital noise reduction (DNR) provides high quality images with minimal dot crawl - Sharp PG-D2870W | PG-D2870W | PG-D3050W | PG-D3550W Operation Manual - Page 49
. 4 Selecting the Dynamic Range An optimum picture may not be displayed if an HDMI-capable device's output signal type and the projector's input signal type do not match. If this should occur, switch "Dynamic Range". Selectable items Auto Standard Enhanced Description In most circumstances - Sharp PG-D2870W | PG-D2870W | PG-D3050W | PG-D3550W Operation Manual - Page 50
Signal Adjustment ("SIG-ADJ" Menu) (Continued) Menu operation n Page 40 5-1 EDID Selection 6 Setting the Video Setup EDID (Extended Display Identification Data) is data that enables a computer to make proper display settings. When you cannot find the desired resolution on your computer, switch EDID - Sharp PG-D2870W | PG-D2870W | PG-D3050W | PG-D3550W Operation Manual - Page 51
. Q button O button 2 Adjusting the Image Position You can move the projected image vertically. O button Q button Note • The Keystone Correction can be adjusted up to an angle of approximately ±40 (PG-D3550W/ D3050W)/±XX (PG-D2870W) degrees (When the Resize mode is set to "NORMAL"). • You can - Sharp PG-D2870W | PG-D2870W | PG-D3050W | PG-D3550W Operation Manual - Page 52
Adjusting the Projected Image (" cases only: Resize mode Normal Area Zoom V-Stretch 16:9 Keystone Correction PG-D3550W/ D3050W PG-D2870W -40 − +40 -XX − +XX -12 − +12 - or if there are problems at the broadcast source. This does not necessarily indicate a problem with the projector. • If any - Sharp PG-D2870W | PG-D2870W | PG-D3050W | PG-D3550W Operation Manual - Page 53
Sharp logo screen Blue Blue screen None - 8 Selecting the Setup Guide Selectable items Description On Displaying the Setup Guide when turning the projector on. Off Not displaying the Setup Guide. 9 Reversing/Inverting Projected Images Selectable items Front Ceiling + Front Rear Ceiling - Sharp PG-D2870W | PG-D2870W | PG-D3050W | PG-D3550W Operation Manual - Page 54
® Link TM Off DLP® Link TM Invert All Reset SEL./ADJ. ENTER END Lamp Timer(Life) SEL./ADJ. 0h ENTER 0 min 100% END 1 Auto Sync (Auto Sync Adjustment) Selectable items Description On Auto Sync adjustment will occur when the projector is turned on or when the input signals are switched - Sharp PG-D2870W | PG-D2870W | PG-D3050W | PG-D3550W Operation Manual - Page 55
projector projector. When you projector. Once this function is activated, users must enter the correct keycode each time the projector Sharp Authorized Projector Dealer or Service Center (see page 67). Even if the product warranty projector projector as an individual button, even if projector projector for - Sharp PG-D2870W | PG-D2870W | PG-D3050W | PG-D3550W Operation Manual - Page 56
ENTER END Info • Even when Keylock function is set to "On", STANDBY/ON on the projector can be used to turn on and off the power. • Keylock cannot be set while the projector is: displaying the "Setup Guide" or "Menu" screens, in Standby mode, warming up, changing input signals, operating the Auto - Sharp PG-D2870W | PG-D2870W | PG-D3050W | PG-D3550W Operation Manual - Page 57
the OPERATION MANUAL FOR STEREOSCOPIC 3D PROJECTION provided separately. DLP® LinkTM Invert See the OPERATION MANUAL FOR STEREOSCOPIC 3D PROJECTION provided separately. Returning to the Default Settings This function allows you to initialize the settings you have made in the projector. Note • The - Sharp PG-D2870W | PG-D2870W | PG-D3050W | PG-D3550W Operation Manual - Page 58
you forget the password, perform the following procedure to delete it, then set a new password. On the projector, press ɹ. Note • If ENTER is held down for more than 5 seconds, the operation buttons on the projector will be locked. (See page 52.) • You cannot use the buttons on the remote control to - Sharp PG-D2870W | PG-D2870W | PG-D3050W | PG-D3550W Operation Manual - Page 59
Setting Connect the LAN cable before turning the projector on. If not, the DHCP Client function does not work. Selectable items On Off Description Obtains configuration parameters for TCP/IP network automatically. Sets the TCP/IP manually. Select "On" for "DHCP Client". "Obtaining IP Address - Sharp PG-D2870W | PG-D2870W | PG-D3050W | PG-D3550W Operation Manual - Page 60
of the projector is displayed. Projector The projector name is displayed. Link Displays the network connection status. Connected Connected to the network. Disconnected Disconnected from the network. Note • For information on how to change the projector name, see "SETUP MANUAL" contained in - Sharp PG-D2870W | PG-D2870W | PG-D3050W | PG-D3550W Operation Manual - Page 61
projector. Strong cleaning detergents may discolor, warp or damage the coating on the projector. Make sure to test on a small, inconspicuous area on the projector get damaged, be careful not to scrape or hit the lens. [PG-D2870W Only] ■ Use a commercially available blower to remove dust. If necessary - Sharp PG-D2870W | PG-D2870W | PG-D3050W | PG-D3550W Operation Manual - Page 62
indicator will illuminate in red. ■ If you try to turn on the projector a fourth time without replacing the lamp, the projector will not turn on. Indicators on the Projector Power indicator Red on Normal (Standby) Green on Normal (Power on) Red blinks Abnormal (See page 59.) Green blinks - Sharp PG-D2870W | PG-D2870W | PG-D3050W | PG-D3550W Operation Manual - Page 63
the AC outlet, and then connect it again. • Remaining lamp life • Carefully replace the lamp. becomes 5% or less. (See page 60.) • Burnt-out lamp • Lamp circuit failure • Take the projector to your nearest Sharp Authorized Projector Dealer or Service Center (see page 67) for repair. • Please - Sharp PG-D2870W | PG-D2870W | PG-D3050W | PG-D3550W Operation Manual - Page 64
a 90-day parts and labor limited warranty. All service of this projector under warranty, including lamp replacement, must be obtained through a Sharp Authorized Projector Dealer or Service Center. For the name of the nearest Sharp Authorized Projector Dealer or Service Center, please call toll-free - Sharp PG-D2870W | PG-D2870W | PG-D3050W | PG-D3550W Operation Manual - Page 65
from the AC socket. • Leave the lamp until it has fully cooled down (about 1 hour). 3 Remove the lamp unit cover. • Close the lens shutter and turn the projector over. Loosen the user service screw (1) that secures the lamp unit cover. Remove the lamp unit cover (2). STANDBY/ON button AC socket - Sharp PG-D2870W | PG-D2870W | PG-D3050W | PG-D3550W Operation Manual - Page 66
the user service screw (3) to secure the lamp unit cover. Info • If the lamp unit and lamp unit cover are not correctly installed, the power will not turn on, even if the power cord is connected to the projector. Resetting the Lamp Timer Reset the lamp timer after replacing the lamp. Info • Make - Sharp PG-D2870W | PG-D2870W | PG-D3050W | PG-D3550W Operation Manual - Page 67
it in the supplied storage case. 1 Open the cover of the storage case. • Fold out the inner padding. 2 Place the projector into the storage case. Info • Ensure the projector has cooled down sufficiently before placing it in the case. • Ensure the lens shutter is closed for protection. • Place the - Sharp PG-D2870W | PG-D2870W | PG-D3050W | PG-D3550W Operation Manual - Page 68
signal support Horizontal Frequency: 15-110 kHz, Vertical Frequency: 45-85 Hz, PC/MAC PC MAC 13" MAC 16" MAC 19" MAC 21" Mode VGA SVGA XGA WXGA WXGA+ SXGA " of the computer is different from the resolution displayed on the projected image, follow the procedures shown below. - Refer to "Resolution" - Sharp PG-D2870W | PG-D2870W | PG-D3050W | PG-D3550W Operation Manual - Page 69
Troubleshooting Problem Check Page • Projector power cord is not plugged into the projected unless the signal output setting of the computer is switched to the external output. Refer to the computer's operation manual for how to switch its signal output settings. • Is "On" selected in "DLP - Sharp PG-D2870W | PG-D2870W | PG-D3050W | PG-D3550W Operation Manual - Page 70
the cooling fan runs noisy. faster. The lamp does not light • The lamp indicator is illuminating in red. up even after the Replace the lamp. projector turns on. • The lens shutter is closed. The lamp suddenly turns off during projection. The image sometimes • Cables are incorrectly connected - Sharp PG-D2870W | PG-D2870W | PG-D3050W | PG-D3550W Operation Manual - Page 71
If you encounter any problems during setup or operation of this projector, first refer to the "Troubleshooting" section on pages 65 and 66. If this operation manual does not answer your question, please contact the SHARP Service departments listed below. U.S.A. Sharp Electronics Corporation 1-888 - Sharp PG-D2870W | PG-D2870W | PG-D3050W | PG-D3550W Operation Manual - Page 72
RS-232C (mini DIN 9 pin) Speaker Projection lamp Rated voltage Rated frequency Input current Power consumption PG-D3550W/PG-D3050W 0.65" DLP® Chip ×1 WXGA (1280 × 800) F 2.4 - 2.6 Manual, ×1.20 Manual f = 19.0 - 22.7 mm ×1 ×2 PG-D2870W units. This SHARP projector uses a DLP® chip. This - Sharp PG-D2870W | PG-D2870W | PG-D3050W | PG-D3550W Operation Manual - Page 73
Dimensions Units: inches (mm) 13/32 (10) 3 1/8 (79) 5 27/64 (137.5) 2 61/64 (75) 11 52/64 (300) 1 31/32 (50) M4 M4 M4 M4 2 61/64 (75) 4 21/32 (118) 1 9/32 (32.5) 1 15/16 (49) 21/32 (16.5) 4 7/64 (104) 8 19/32 (218) 2 5/16 (58.5) 1 21/32 (41.7) 1 15/32 (37.3) 1 1/2 (38) 9 19/64 (236) - Sharp PG-D2870W | PG-D2870W | PG-D3050W | PG-D3550W Operation Manual - Page 74
3D 11 DLP® LinkTM 53 DLP® LinkTM 54 PDF 10 Replacing the lamp 60, 61 Reset Network Setting 55 Resize 31, 47 RESIZE button 31 Resolution 45 Restart Network 55 RGB cable 21 RS-232C terminal 24 SCR-ADJ 47 Screen Size and Projection Distance 19 Security bar 13 Setup Guide 27, 49 Sharp - Sharp PG-D2870W | PG-D2870W | PG-D3050W | PG-D3550W Operation Manual - Page 75
![](/manual_guide/products/sharp-pgd2870w-pgd2870w-pgd3050w-pgd3550w-operation-manual-98e7069/1.png)
Introduction
Easy Start
Setup
Connections
Basic
Operation
Useful
Features
Appendix
OPERATION MANUAL
DATA PROJECTOR
MODEL
PG-D3550W
PG-D3050W
PG-D2870W
PG-D3550W/PG-D3050W