Sharp PG-D3010X PG-D2710X PG-D3010X PG-D3510X Operation Manual
Sharp PG-D3010X Manual
UPC - 074000365872
View all Sharp PG-D3010X manuals
Add to My Manuals
Save this manual to your list of manuals |
Sharp PG-D3010X manual content summary:
- Sharp PG-D3010X | PG-D2710X | PG-D3010X | PG-D3510X Operation Manual - Page 1
DATA PROJECTOR MODEL PG-D3510X PG-D3010X PG-D2710X OPERATION MANUAL Introduction Easy Start Setup Connections Basic Operation Useful Features Appendix - Sharp PG-D3010X | PG-D2710X | PG-D3010X | PG-D3510X Operation Manual - Page 2
IMPORTANT • For your assistance in reporting the loss or theft of your Projector, please record the Model and Serial Number located on the bottom of the projector and retain this information. • Before recycling the packaging, please ensure that you have checked the contents of the carton thoroughly - Sharp PG-D3010X | PG-D2710X | PG-D3010X | PG-D3510X Operation Manual - Page 3
plug incorporating a 10A fuse. Should the fuse need to be replaced, a BSI or ASTA approved BS 1362 fuse marked or and of an appropriate plug to the mains lead, follow the instructions below: WARNING: THIS APPARATUS MUST BE EARTHED. IMPORTANT SHARP ELECTRONICS (Europe) GmbH Sonninstraße 3, - Sharp PG-D3010X | PG-D2710X | PG-D3010X | PG-D3510X Operation Manual - Page 4
and Arabic. Carefully read through the operation instructions before operating the projector. Die mitgelieferte CD-ROM enthält Bedienungsanleitungen Bedienungsanleitung vor der Verwendung des Projektors sorgfältig durch. Le CD-ROM fourni contient les instructions de fonctionnement en anglais, - Sharp PG-D3010X | PG-D2710X | PG-D3010X | PG-D3510X Operation Manual - Page 5
manual carefully. Introduction ENGLISH There are two important reasons for prompt warranty registration of your new SHARP Projector, using the REGISTRATION CARD packed with the projector. 1. WARRANTY This is to assure that you immediately receive the full benefit of the parts, service - Sharp PG-D3010X | PG-D2710X | PG-D3010X | PG-D3510X Operation Manual - Page 6
manual, instructions described on pages 60 to 62. * If you wish, you may have the lamp replaced at your nearest Sharp Authorized Projector Dealer or Service Center. * If the new lamp does not light after replacement, take your projector to the nearest Sharp Authorized Projector Dealer or Service - Sharp PG-D3010X | PG-D2710X | PG-D3010X | PG-D3510X Operation Manual - Page 7
and operate all models in the same manner. • In this operation manual, the illustration and the screen display are simplified for explanation, the projector. Note ....... Indicates additional information for setting up and operating the projector. For Future Reference Maintenance Troubleshooting - Sharp PG-D3010X | PG-D2710X | PG-D3010X | PG-D3510X Operation Manual - Page 8
the Setup Guide 27 Adjusting the Projected Image 27 Correcting Trapezoidal Distortion 29 Switching the Input Mode 30 Adjusting the Volume 30 Displaying the Black Screen and Turning Off the Sound Temporarily ....... 30 Resize Mode 31 Useful Features Operating with the Remote Control......33 - Sharp PG-D3010X | PG-D2710X | PG-D3010X | PG-D3510X Operation Manual - Page 9
58 Regarding the Lamp 60 Lamp 60 Caution Concerning the Lamp 60 Replacing the Lamp 60 Removing and Installing the Lamp Unit 61 Resetting the Lamp Timer 62 Storing the Projector 63 How to Use the Storage Case 63 Computer Compatibility Chart 64 Troubleshooting 65 For SHARP Assistance 67 - Sharp PG-D3010X | PG-D2710X | PG-D3010X | PG-D3510X Operation Manual - Page 10
servicing. 1. Read Instructions All the safety and operating instructions should be read before the product is operated. 2. Retain Instructions The safety and operating instructions Any mounting of the product should follow the manufacturer's instructions, and should use a mounting accessory - Sharp PG-D3010X | PG-D2710X | PG-D3010X | PG-D3510X Operation Manual - Page 11
operating instructions. Adjust only those controls that are covered by the operating instructions, as an improper adjustment of other controls may result need for service. 19. Replacement Parts When replacement parts are required, be sure the service technician has used replacement parts specified - Sharp PG-D3010X | PG-D2710X | PG-D3010X | PG-D3510X Operation Manual - Page 12
hazard of glass particles if lamp ruptures. In case of lamp rupture, contact your nearest Sharp Authorized Projector Dealer or Service Center for replacement. See "Regarding the Lamp" on page 60. Caution concerning the setup of the projector ■ For minimal servicing and to maintain high image - Sharp PG-D3010X | PG-D2710X | PG-D3010X | PG-D3510X Operation Manual - Page 13
manuals of the projector and the equipment to be connected for instructions on how to make the connections. Using the projector the lamp will turn off, the cooling fan will run and then the projector will enter automatically controlled. The sound of the fan may change during projector operation - Sharp PG-D3010X | PG-D2710X | PG-D3010X | PG-D3510X Operation Manual - Page 14
the Internet (http://www.adobe.com). Accessing the PDF Manuals For Windows®: 1 Insert the CD-ROM in Projector Using the PJLinkTM Protocol 10 Setting up the Projector Network Environment 11 Controlling the Projector via LAN 17 Resetting the Lamp Timer of the Projector via LAN 22 Troubleshooting - Sharp PG-D3010X | PG-D2710X | PG-D3010X | PG-D3510X Operation Manual - Page 15
>, OPERATION MANUAL FOR STEREOSCOPIC 3D PROJECTION and CD-ROM ) Note • Codes in "< >" are Replacement parts codes. Optional accessories ■ Lamp unit ■ Ceiling-mount adaptor ■ Ceiling-mount bracket ■ Ceiling-mount unit ■ Ceiling-mount extension tube ■ Remote receiver - Sharp PG-D3010X | PG-D2710X | PG-D3010X | PG-D3510X Operation Manual - Page 16
to the main pages in this operation manual where the topic is explained. 10 11 Remote control sensor 15 8 Speaker 50 9 Intake vent 57 12 Top View 10 Temperature warning indicator 58 11 Lamp indicator 58 12 Power indicator 58 13 STANDBY/ON button 26 For turning the power on and putting the projector - Sharp PG-D3010X | PG-D2710X | PG-D3010X | PG-D3510X Operation Manual - Page 17
for controlling the projector using a computer. 3 USB terminal 35 Terminal connecting with the USB terminal on the computer for using the supplied remote control foot 28 14 Security bar Using the Kensington Lock • This projector has a Kensington Security Standard connector for use with a Kensington - Sharp PG-D3010X | PG-D2710X | PG-D3010X | PG-D3510X Operation Manual - Page 18
manual where the topic is explained. 1 2 3 14 4 15 5 16 6 7 17 8 18 9 19 10 20 11 21 12 22 13 23 1 ON button 26 For turning the power on. 2 STANDBY button 26 For putting the projector and extending the lamp life. 14 FREEZE cable or the optional remote receiver). • For - Sharp PG-D3010X | PG-D2710X | PG-D3010X | PG-D3510X Operation Manual - Page 19
. • The batteries included with this projector may run down in a short period, depending on how they are kept. Be sure to replace them as soon as possible with new batteries. • Remove the batteries from the remote control if you will not be using the remote control for a long time. • Comply with - Sharp PG-D3010X | PG-D2710X | PG-D3010X | PG-D3510X Operation Manual - Page 20
18 2.Connect the projector to the computer and plug the power cord into the AC socket of the projector When connecting equipment other than a computer, see pages 22 and 23. _PP. 21, 25 3. Open the lens shutter fully and then turn the projector on On the projector On the remote control _P. 26 16 - Sharp PG-D3010X | PG-D2710X | PG-D3010X | PG-D3510X Operation Manual - Page 21
Setup Guide. _P. 27 5. Correct trapezoidal distortion Correcting trapezoidal distortion using Keystone Correction. On the remote control the projector INPUT list INPUT Audio On the projector 1 COMPUTER1 On the remote control 2 MONITOR OUT S S-VIDEO V VIDEO On the remote control _P. - Sharp PG-D3010X | PG-D2710X | PG-D3010X | PG-D3510X Operation Manual - Page 22
so will eliminate the need for Keystone correction and provide the best image quality. (See page 29.) Standard Setup (Front Projection) ■ Place the projector at the required distance from the screen according to the desired picture size. (See page 19.) Indication of the Projection Image Size and - Sharp PG-D3010X | PG-D2710X | PG-D3010X | PG-D3510X Operation Manual - Page 23
±31 cm (±12 1/4") ±25 cm (±9 13/16") ±21 cm (±8 11/64") ±17 cm (±6 17/32") ±12 cm (±4 29/32") ±8 cm (±3 17/64") When using the projector with screen sizes not listed in the above charts, calculate the values according to the formulas. L1: Minimum projection distance (m/ft) L2: Maximum projection - Sharp PG-D3010X | PG-D2710X | PG-D3010X | PG-D3510X Operation Manual - Page 24
) [Menu item ➞ "Ceiling + Rear"] aCeiling-Mount Setup It is recommended that you use the optional Sharp ceiling-mount adaptor and unit for this installation. Before mounting the projector, contact your nearest Sharp Authorized Projector Dealer or Service Center to obtain the recommended ceiling - Sharp PG-D3010X | PG-D2710X | PG-D3010X | PG-D3510X Operation Manual - Page 25
Compatibility Chart" for a list of computer signals compatible with the projector. Use with computer signals other than those listed may cause some simultaneously when using a SHARP notebook computer). Refer to the specific instructions in your computer's operation manual to enable your computer - Sharp PG-D3010X | PG-D2710X | PG-D3010X | PG-D3510X Operation Manual - Page 26
15 pin cable (optional, AN-C3CP2) Terminal on the projector COMPUTER/ COMPONENT 1, 2 S-video output terminal S-video cable -scart) to the projector, use a commercially available cable that fits in the projector terminal you want to connect. • The projector does not support RGBC signals via the - Sharp PG-D3010X | PG-D2710X | PG-D3010X | PG-D3510X Operation Manual - Page 27
Cable ø3.5 mm ø3.5 mm stereo or mono audio cable audio output (commercially available or available terminal as Sharp service part QCNWGA038WJPZ) Terminal on the projector AUDIO 1 Monitor Amplifier RCA audio output terminal RCA audio cable (commercially available) AUDIO 2 Audio output - Sharp PG-D3010X | PG-D2710X | PG-D3010X | PG-D3510X Operation Manual - Page 28
with a DIN-D-sub RS232C adaptor (supplied) and an RS-232C serial control cable (cross type, commercially available), the computer can be used to control the projector and check the status of the projector. Refer to the "SETUP MANUAL" contained on the supplied CD-ROM for "RS-232C Specifications and - Sharp PG-D3010X | PG-D2710X | PG-D3010X | PG-D3510X Operation Manual - Page 29
Category 5 (CAT.5) type cable (commercially available). Connections Connecting the Power Cord Plug the supplied power cord into the AC socket on the rear of the projector. Then plug into AC outlet. Power cord (supplied) AC socket To AC outlet 25 - Sharp PG-D3010X | PG-D2710X | PG-D3010X | PG-D3510X Operation Manual - Page 30
shutter fully and press STANDBY/ON on the projector or ON on the remote control. • The power indicator illuminates green. • After the lamp indicator illuminates, the projector is ready to start operation. Note • About the Lamp Indicator The lamp indicator illuminates to indicate the status of the - Sharp PG-D3010X | PG-D2710X | PG-D3010X | PG-D3510X Operation Manual - Page 31
Image Projection About the Setup Guide After turning on the projector, the Setup Guide screen appears to assist you with projector setup. Guidance items 1 FOCUS 2 HEIGHT ADJUST 3 ZOOM Press ENTER to exit the Setup Guide screen. Note • The Setup Guide screen automatically highlights the items in the - Sharp PG-D3010X | PG-D2710X | PG-D3010X | PG-D3510X Operation Manual - Page 32
to correct the distortion. (See pages 29 and 47.) 3 Adjusting the Picture Size You can adjust the picture size using the zoom ring on the projector. Rotate the zoom ring to enlarge or shrink the picture size. • Using the knob on the zoom ring will make the adjustments easier. Rear adjustment - Sharp PG-D3010X | PG-D2710X | PG-D3010X | PG-D3510X Operation Manual - Page 33
Correcting Trapezoidal Distortion When the image is projected either from the top or from the bottom towards the screen at an angle, the image becomes distorted trapezoidally. The function for correcting trapezoidal distortion is called Keystone Correction. Note • The Keystone Correction can be - Sharp PG-D3010X | PG-D2710X | PG-D3010X | PG-D3510X Operation Manual - Page 34
the audio input terminal. INPUT buttons AV MUTE button VOL +/- (Volume) buttons O/Q buttons Adjusting the Volume Press VOL +/- on the remote control or -O/Q+ on the projector to adjust the volume. Note • Pressing VOL-/-O will lower the volume. • Pressing VOL+/Q+ will raise the volume. • When the - Sharp PG-D3010X | PG-D2710X | PG-D3010X | PG-D3510X Operation Manual - Page 35
image. Press RESIZE. • See page 47 for setting on menu screen. COMPUTER RESIZE button 4:3 aspect ratio Other aspect ratios Main resolution SVGA (800 × 600) XGA (1024 × 768) SXGA (1152 × 864) UXGA (1600 × 1200) SXGA (1280 × 1024) 1280 × 720 1360 × 768 1366 × 768 1280 × 768 1280 × 800 NORMAL 1024 - Sharp PG-D3010X | PG-D2710X | PG-D3010X | PG-D3510X Operation Manual - Page 36
Image Projection (Continued) VIDEO/DTV Input signal Video/DTV Image type NORMAL For 4:3 screen AREA ZOOM V-STRETCH For 16:9 screen BORDER 16:9 *1 *1 480I, 480P, 576I, 576P, NTSC, PAL, SECAM 4:3 aspect ratio Squeeze *1 *1 *1 *1 Letter box 720P, 1035I, 1080I, 1080P *1 16:9 aspect - Sharp PG-D3010X | PG-D2710X | PG-D3010X | PG-D3510X Operation Manual - Page 37
the Spot Function 1 Press SPOT and press P/R/O/Q on the remote control to move the spot area. • Press EFFECT to change the . Note • The Break Timer is not available while the projector is operating the following functions. - Auto Sync - Freeze lamp life will extend. Note • Refer to "Eco+Quiet" on - Sharp PG-D3010X | PG-D2710X | PG-D3010X | PG-D3510X Operation Manual - Page 38
Operating with the Remote Control (Continued) Auto Sync (Auto Sync Adjustment) Displaying an Enlarged Portion of an Image Auto Sync function works when detecting input signal after the projector turns on. Press AUTO SYNC to manually adjust with Auto Sync function. Note • When the optimum image - Sharp PG-D3010X | PG-D2710X | PG-D3010X | PG-D3510X Operation Manual - Page 39
projector with the remote control. For details, see the operation manual of the receiver. Connecting with a USB cable Computer To USB terminal Remote receiver To USB terminal (optional, AN-MR2) or USB cable (commercially available or available as Sharp service Mac OS® that support USB. • You - Sharp PG-D3010X | PG-D2710X | PG-D3010X | PG-D3510X Operation Manual - Page 40
following shows the items that can be set in the projector. "Quick Start Menu" Main menu Quick Start Menu Movie Game sRGB*1 Contrast -30 +30 Bright -30 +30 Color -30 +30 *2 Tint -30 +30 *2 Sharp -30 +30 *2 Red -30 +30 Blue -30 +30 Page 43 CLR Temp -1 1 Page 43 BrilliantColor - Sharp PG-D3010X | PG-D2710X | PG-D3010X | PG-D3510X Operation Manual - Page 41
47 Keystone -80 +80 Page 47 Overscan [On/Off] Page 48 OSD Display [On/Off] Page 48 Closed Caption Page 48 Background Page 49 Setup Guide [On/Off] Page 49 PRJ Mode Page 49 Wall Color Page 49 Language Page 49 Sub menu Normal Full Native Area Zoom V-Stretch Border 16 - Sharp PG-D3010X | PG-D2710X | PG-D3010X | PG-D3510X Operation Manual - Page 42
COMPUTER2 Select Page 52 FUNCTION Button Page 53 STANDBY Mode Page 53 DLP® LinkTM [On/Off] Page 53 DLP® LinkTM Invert Page 53 All Reset Page 53 Lamp Timer (Life) Page 53 Sub menu Input Monitor Output Input Search Page 55 IP Address Page 56 MAC Address Page 56 Projector Page 56 Link Page 56 38 - Sharp PG-D3010X | PG-D2710X | PG-D3010X | PG-D3510X Operation Manual - Page 43
when the menu is displayed. MENU button Menu Selections (Quick Start Menu) • This operation can also be performed by using the buttons on the projector. 1 Press MENU. • The "Quick Start Menu" screen for the selected Input mode is displayed. 2 Press P or R to select the desired item, then press - Sharp PG-D3010X | PG-D2710X | PG-D3010X | PG-D3510X Operation Manual - Page 44
input searching cancels the search. Manually change the resolution. Use this (See page 49.) Displays the input signal, lamp use time, remaining lamp life, etc. Displays the Complete Menu for operation can also be performed by using the buttons on the projector. 1 Press MENU. • The "Quick Start Menu" - Sharp PG-D3010X | PG-D2710X | PG-D3010X | PG-D3510X Operation Manual - Page 45
+Quiet Reset SEL./ADJ. SCR PRJ1 PRJ2 Net. Standard 0 15 0 0 0 1 On Level 2 Off Single ADJ END Note • The MENU button is not available while the projector is operating: - Auto Sync/Break Timer/Freeze/AV Mute/Input Search Useful Features 41 - Sharp PG-D3010X | PG-D2710X | PG-D3010X | PG-D3510X Operation Manual - Page 46
Movie Game *sRGB Gives natural tint to the projected image. Gives sharpness to the projected image. For high fidelity reproduction of images from are retained in memory. Note • You can also press PICTURE MODE on the remote control to select the Picture mode. (See page 34.) • *sRGB is an - Sharp PG-D3010X | PG-D2710X | PG-D3010X | PG-D3510X Operation Manual - Page 47
making the effect weaker. Q button For more contrast. For more brightness. For more color intensity. For making skin tones greenish. For more sharpness. For stronger red. For stronger blue. For making the effect stronger. *1 Not displayed in the RGB input mode. *2 Not adjustable/selectable when - Sharp PG-D3010X | PG-D2710X | PG-D3010X | PG-D3510X Operation Manual - Page 48
Off Description Films are detected automatically. Films are not detected. 7 Eco+Quiet Selectable items On Off Brightness and Power consumption PG-D3510X PG-D3010X PG-D2710X Approx. 65% Approx. 75% 100% Note • This function is available for the following signals. With COMPUTER/COMPONENT 1 or - Sharp PG-D3010X | PG-D2710X | PG-D3010X | PG-D3510X Operation Manual - Page 49
Signal Adjustment ("SIG-ADJ" Menu) Menu operation n Page 40 Pict. SIG-ADJ SCR PRJ1 PRJ2 Net. Clock 0 Phase 0 1 H-Pos 0 V-Pos 0 Reset 2 Resolution 3 Signal Type 1024 x 768 Auto 4 Video System 5 Video Setup Auto 0 IRE 6 Signal Info 1024 x 768 H 48.3 kHz / V 60.0 Hz SEL./ADJ. ENTER - Sharp PG-D3010X | PG-D2710X | PG-D3010X | PG-D3510X Operation Manual - Page 50
Signal Adjustment ("SIG-ADJ" Menu) (Continued) Menu operation n Page 40 4 Setting the Video System 6 Checking the Input Signal The video input system mode is factory preset to "Auto"; however, a clear picture from the connected audio-visual equipment may not be received, depending on the Video - Sharp PG-D3010X | PG-D2710X | PG-D3010X | PG-D3510X Operation Manual - Page 51
Image Shift 3 Keystone 4 Overscan 5 OSD Display 6 Closed Caption 7 Background 8 Setup Guide 9 PRJ Mode 0 Wall Color Normal 0 0 On On Off Logo On Front Off , see pages 31 and 32. • You can also press RESIZE on the remote control to set the Resize mode. (See page 31.) 3 Keystone Correction When the - Sharp PG-D3010X | PG-D2710X | PG-D3010X | PG-D3510X Operation Manual - Page 52
Caption may malfunction (white blocks, strange characters, etc.) if signal conditions are poor or if there are problems at the broadcast source. This does not necessarily indicate a problem with the projector. • If any button is pressed to call up the onscreen display while viewing a Closed Caption - Sharp PG-D3010X | PG-D2710X | PG-D3010X | PG-D3510X Operation Manual - Page 53
Image Selectable items Description Logo Sharp logo screen Blue Blue screen None - 8 Selecting the Setup Guide Selectable items Description On Displaying the Setup Guide when turning the projector on. Off Not displaying the Setup Guide. 9 Reversing/Inverting Projected Images - Sharp PG-D3010X | PG-D2710X | PG-D3010X | PG-D3510X Operation Manual - Page 54
® Link TM Off DLP® Link TM Invert All Reset SEL./ADJ. ENTER END Lamp Timer(Life) SEL./ADJ. 0h ENTER 0 min 100% END 1 Auto Sync (Auto Sync Adjustment) Selectable items Description On Auto Sync adjustment will occur when the projector is turned on or when the input signals are switched - Sharp PG-D3010X | PG-D2710X | PG-D3010X | PG-D3510X Operation Manual - Page 55
lose or forget your keycode, contact your nearest Sharp Authorized Projector Dealer or Service Center (see page 67). Even if the product for entering the keycode appears. 3 Press the 4 buttons on the remote control or on the projector to enter the preset keycode in "Old Code". • When setting the - Sharp PG-D3010X | PG-D2710X | PG-D3010X | PG-D3510X Operation Manual - Page 56
/ON on the projector can be used to turn on and off the power. • Keylock cannot be set while the projector is: displaying the "Setup Guide" or "Menu" not affect the operation with the remote control buttons. • You cannot use the Keylock function while the projector is warming up. You can also - Sharp PG-D3010X | PG-D2710X | PG-D3010X | PG-D3510X Operation Manual - Page 57
button on the remote control. The assigned function even if the projector is in Standby mode. Returning DLP® LinkTM Invert See the OPERATION MANUAL FOR STEREOSCOPIC 3D PROJECTION provided separately. Note • It is recommended that the lamp be changed when the remaining lamp life becomes 5%. • The lamp - Sharp PG-D3010X | PG-D2710X | PG-D3010X | PG-D3510X Operation Manual - Page 58
, perform the following procedure to delete it, then set a new password. On the projector, press ɹ. Note • If ENTER is held down for more than 5 seconds, the operation buttons on the projector will be locked. (See page 52.) • You cannot use the buttons on the remote control to delete the password. - Sharp PG-D3010X | PG-D2710X | PG-D3010X | PG-D3510X Operation Manual - Page 59
projector on. If not, the DHCP Client function does not work. Selectable items On Off Description Obtains configuration parameters for TCP/IP network automatically. Sets the TCP/IP manually function. Perform this function when the projector cannot be controlled via the network. Useful Features 55 - Sharp PG-D3010X | PG-D2710X | PG-D3010X | PG-D3510X Operation Manual - Page 60
of the projector is displayed. Projector The projector name is displayed. Link Displays the network connection status. Connected Connected to the network. Disconnected Disconnected from the network. Note • For information on how to change the projector name, see "SETUP MANUAL" contained in - Sharp PG-D3010X | PG-D2710X | PG-D3010X | PG-D3510X Operation Manual - Page 61
diluted with water Wax Thinner Info • If you want to clean the air vents during projector operation, ensure you press STANDBY/ON on the projector or STANDBY on the remote control and put the projector into Standby mode. After the cooling fan has stopped, clean the vents. Appendix Mild detergent - Sharp PG-D3010X | PG-D2710X | PG-D3010X | PG-D3510X Operation Manual - Page 62
indicator will illuminate in red. ■ If you try to turn on the projector a fourth time without replacing the lamp, the projector will not turn on. Indicators on the Projector Power indicator Red on Normal (Standby) Green on Normal (Power on) Red blinks Abnormal (See page 59.) Green blinks - Sharp PG-D3010X | PG-D2710X | PG-D3010X | PG-D3510X Operation Manual - Page 63
the AC outlet, and then connect it again. • Remaining lamp life • Carefully replace the lamp. becomes 5% or less. (See page 60.) • Burnt-out lamp • Lamp circuit failure • Take the projector to your nearest Sharp Authorized Projector Dealer or Service Center (see page 67) for repair. • Please - Sharp PG-D3010X | PG-D2710X | PG-D3010X | PG-D3510X Operation Manual - Page 64
the instructions described in this section. * If you wish, you may have the lamp replaced at your nearest Sharp Authorized Projector Dealer or Service Center. * If the new lamp does not light after replacement, take your projector to the nearest Sharp Authorized Projector Dealer or Service Center - Sharp PG-D3010X | PG-D2710X | PG-D3010X | PG-D3510X Operation Manual - Page 65
remote control to put the projector into Standby mode. 2 Disconnect the power cord. • Unplug the power cord from the AC socket. • Leave the lamp until it has fully cooled down (about 1 hour). 3 Remove the lamp unit cover. • Close the lens shutter and turn the projector over. Loosen the user service - Sharp PG-D3010X | PG-D2710X | PG-D3010X | PG-D3510X Operation Manual - Page 66
the user service screw (3) to secure the lamp unit cover. Info • If the lamp unit and lamp unit cover are not correctly installed, the power will not turn on, even if the power cord is connected to the projector. Resetting the Lamp Timer Reset the lamp timer after replacing the lamp. Info • Make - Sharp PG-D3010X | PG-D2710X | PG-D3010X | PG-D3510X Operation Manual - Page 67
of the storage case. • Fold out the inner padding. 2 Place the projector into the storage case. Info • Ensure the projector has cooled down sufficiently before placing it in the case. • Ensure the the storage case. Lens shutter Fixing band Supplied accessories (Remote control, etc.) Appendix 63 - Sharp PG-D3010X | PG-D2710X | PG-D3010X | PG-D3510X Operation Manual - Page 68
Computer Compatibility Chart Computer • Multiple signal support Horizontal Frequency: 15-110 kHz, Vertical Frequency: 45-85 Hz, PC/MAC PC MAC 13" MAC 16" MAC 19" MAC 21" Mode VGA SVGA XGA WXGA WXGA+ SXGA SXGA+ WSXGA+ UXGA VGA SVGA XGA SXGA Resolution 640 × 400 720 × 400 640 × 480 800 × 600 1024 - Sharp PG-D3010X | PG-D2710X | PG-D3010X | PG-D3510X Operation Manual - Page 69
Troubleshooting Problem Check Page • Projector power cord is not plugged into the wall outlet. projector. 21-25 No picture and no sound • Remote control battery has run out. 15 or projector does not start. • External output has not been set when connecting a notebook computer. 21 • The lamp - Sharp PG-D3010X | PG-D2710X | PG-D3010X | PG-D3510X Operation Manual - Page 70
need to be changed. time to turn on. While the remaining lamp life draws to a close, replace the lamp. Picture is dark. The remote control cannot be used. • Operate the remote control while pointing it at the projector's remote control sensor. • The remote control may be too far away from the - Sharp PG-D3010X | PG-D2710X | PG-D3010X | PG-D3510X Operation Manual - Page 71
If you encounter any problems during setup or operation of this projector, first refer to the "Troubleshooting" section on pages 65 and 66. If this operation manual does not answer your question, please contact the SHARP Service departments listed below. U.S.A. Sharp Electronics Corporation 1-888 - Sharp PG-D3010X | PG-D2710X | PG-D3010X | PG-D3510X Operation Manual - Page 72
Control and LAN (RJ-45) communication USB (Type B) terminals RS-232C (mini DIN 9 pin) Speaker Projection lamp Weight (approx.) PG-D3510X/PG-D3010X PG-D2710X 0.55" DLP® Chip ×1 XGA (1024 × 768) F 2.4 - 2.6 Manual, ×1.20 (f = 19.0 - 22.7 mm) Manual units. This SHARP projector uses a DLP® chip. - Sharp PG-D3010X | PG-D2710X | PG-D3010X | PG-D3510X Operation Manual - Page 73
Dimensions Units: inches (mm) 13/32 (10) 3 1/8 (79) 5 27/64 (137.5) 2 61/64 (75) 11 52/64 (300) 1 31/32 (50) M4 M4 M4 M4 2 61/64 (75) 4 21/32 (118) 1 9/32 (32.5) 1 15/16 (49) 21/32 (16.5) 4 7/64 (104) 8 19/32 (218) 2 5/16 (58.5) 1 21/32 (41.7) 1 15/32 (37.3) 1 1/2 (38) 9 19/64 (236) - Sharp PG-D3010X | PG-D2710X | PG-D3010X | PG-D3510X Operation Manual - Page 74
43 Remote control 14 Remote control sensor 15 Replacing the lamp 60, 61 Reset Network Setting 55 Resize 31, 47 RESIZE button 31 Resolution 45 Restart Network 55 RGB cable 21 RS-232C terminal 24 SCR-ADJ 47 Screen Size and Projection Distance 19 Security bar 13 Setup Guide 27, 49 Sharp - Sharp PG-D3010X | PG-D2710X | PG-D3010X | PG-D3510X Operation Manual - Page 75
Introduction
Easy Start
Setup
Connections
Basic
Operation
Useful
Features
Appendix
OPERATION MANUAL
DATA PROJECTOR
MODEL
PG-D3510X
PG-D3010X
PG-D2710X