Sharp PG-D4010X PG-D4010X Operation Manual
Sharp PG-D4010X - XGA DLP Projector Manual
 |
UPC - 074000365766
View all Sharp PG-D4010X manuals
Add to My Manuals
Save this manual to your list of manuals |
Sharp PG-D4010X manual content summary:
- Sharp PG-D4010X | PG-D4010X Operation Manual - Page 1
DATA PROJECTOR MODEL PG-D4010X OPERATION MANUAL Introduction Quick Start Setup Connections Basic Operation Useful Features Appendix - Sharp PG-D4010X | PG-D4010X Operation Manual - Page 2
IMPORTANT • For your assistance in reporting the loss or theft of your Projector, please record the Model and Serial Number located on the bottom of the projector and retain this information. • Before recycling the packaging, please ensure that you have checked the contents of the carton thoroughly - Sharp PG-D4010X | PG-D4010X Operation Manual - Page 3
non-rewireable (moulded) plug incorporating a 10A fuse. Should the fuse need to be replaced, a BSI or ASTA approved BS 1362 fuse marked or and of the same . To fit an appropriate plug to the mains lead, follow the instructions below: WARNING: THIS APPARATUS MUST BE EARTHED. IMPORTANT: The wires - Sharp PG-D4010X | PG-D4010X Operation Manual - Page 4
English, German, French, Spanish, Italian, Dutch, Swedish, Portuguese, Chineseand Korean. Carefully read through the operation instructions before operating the projector. Die mitgelieferte CD-ROM enthält Bedienungsanleitungen in Englisch, Deutsch, Französisch, Spanisch, Italienisch, Niederländisch - Sharp PG-D4010X | PG-D4010X Operation Manual - Page 5
manual carefully. Introduction ENGLISH There are two important reasons for prompt warranty registration of your new SHARP Projector, using the REGISTRATION CARD packed with the projector. 1. WARRANTY This is to assure that you immediately receive the full benefit of the parts, service - Sharp PG-D4010X | PG-D4010X Operation Manual - Page 6
and used in accordance with the operation manual, may cause harmful interference to radio lamp recycling organization www.lamprecycle.org, or Sharp at 1-800-BE-SHARP. U.S.A. ONLY Caution Concerning Lamp Replacement See "Replacing the Lamp" on page 55. This SHARP projector uses a DLP - Sharp PG-D4010X | PG-D4010X Operation Manual - Page 7
manner. • In this operation manual, the illustration and the screen C.M.S. Setting C.M.S. DNR Eco+Quiet Reset SEL./ADJ. PRJ Net. Help Standard projector. Note ....... Indicates additional information for setting up and operating the projector. For Future Reference Maintenance Troubleshooting - Sharp PG-D4010X | PG-D4010X Operation Manual - Page 8
Manual ......3 Contents 4 IMPORTANT SAFEGUARDS 6 How to Access the PDF Operation Manuals 10 Accessories 11 Part Names and Functions 12 Projector Menu 43 Setting the Resize Mode 43 Adjusting the Image Position 43 Keystone Correction 43 Setting the Overscan 43 Setting the On-screen Display - Sharp PG-D4010X | PG-D4010X Operation Manual - Page 9
Indicators 53 Regarding the Lamp 55 Lamp 55 Caution Concerning the Lamp 55 Replacing the Lamp 55 Removing and Installing the Lamp Unit 56 Resetting the Lamp Timer 57 Computer Compatibility Chart 58 Troubleshooting 59 For SHARP Assistance 61 Specifications 62 Dimensions 63 Index 64 5 - Sharp PG-D4010X | PG-D4010X Operation Manual - Page 10
servicing. 1. Read Instructions All the safety and operating instructions should be read before the product is operated. 2. Retain Instructions The safety and operating instructions Any mounting of the product should follow the manufacturer's instructions, and should use a mounting accessory - Sharp PG-D4010X | PG-D4010X Operation Manual - Page 11
way. f. When the product exhibits a distinct change in performance, this indicates a need for service. 19. Replacement Parts When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original - Sharp PG-D4010X | PG-D4010X Operation Manual - Page 12
hazard of glass particles if lamp ruptures. In case of lamp rupture, contact your nearest Sharp Authorized Projector Dealer or Service Center for replacement. See "Regarding the Lamp" on page 55. Caution concerning the setup of the projector ■ For minimal servicing and to maintain high image - Sharp PG-D4010X | PG-D4010X Operation Manual - Page 13
read the operation manuals of the projector and the equipment to be connected for instructions on how to make the connections. Using the projector in other countries If this state continues, the lamp will turn off, the cooling fan will run and then the projector will enter standby mode. Refer to - Sharp PG-D4010X | PG-D4010X Operation Manual - Page 14
the Internet (http://www.adobe.com). Accessing the PDF Manuals For Windows®: Insert the CD-ROM in the Projector Network Environment 9 Controlling the Projector via LAN 15 Setting up the Projector Using RS-232C or Telnet 20 Resetting the Lamp Timer of the Projector via LAN 30 Troubleshooting - Sharp PG-D4010X | PG-D4010X Operation Manual - Page 15
> (4) For U.S. and Canada, etc. (6' (1.8 m)) manual (this manual and CD-ROM ) Note • Codes in "< >" are Replacement parts codes. Optional accessories ■ Lamp unit ■ Ceiling-mount adaptor ■ Ceiling-mount Sharp Authorized Projector Dealer or Service Center. 11 - Sharp PG-D4010X | PG-D4010X Operation Manual - Page 16
manual where the topic is explained. Projector Top View AUTO SYNC 33 button For automatically adjusting images when connected to a computer. STANDBY/ON 26 button For turning the power on and putting the projector into standby mode. 28 KEYSTONE fan and extending the lamp life. Front View - Sharp PG-D4010X | PG-D4010X Operation Manual - Page 17
this operation manual where the topic projector by the lens as this may damage the lens. Using the Kensington Lock • This projector has a Kensington Security Standard connector for use with a Kensington MicroSaver Security System. Refer to the information that came with the system for instructions - Sharp PG-D4010X | PG-D4010X Operation Manual - Page 18
(Continued) STANDBY button 26 For putting the projector into the standby mode. COMPUTER, DVI, 29 Keystone Correction mode. AUTO SYNC button 33 For automatically adjusting images when connected to a computer. ECO+QUIET button 32 For lowering the noise of the cooling fan and extending the lamp - Sharp PG-D4010X | PG-D4010X Operation Manual - Page 19
• The batteries included with this projector may run down in a short period, depending on how they are kept. Be sure to replace them as soon as possible with remote control may malfunction under a fluorescent lamp. In this case, move the projector away from the fluorescent lamp. 30° 30° 23 n (7 m) - Sharp PG-D4010X | PG-D4010X Operation Manual - Page 20
(P/R/O/Q) buttons 6 INPUT buttons 4 Zoom ring 4 Focus ring 4 HEIGHT ADJUST lever 6 COMPUTER button 5 Adjustment buttons (P/R/O/Q) 5 KEYSTONE button 1. Place the projector facing a wall or a screen _P. 18 2.Connect the projector to the computer and plug the power cord into the AC socket of the - Sharp PG-D4010X | PG-D4010X Operation Manual - Page 21
1 Adjusting the focus. 2 Adjusting the height. 3 Adjusting the picture size. 5. Correct trapezoidal distortion Correcting trapezoidal distortion using Keystone Correction. On the projector Shrinks upper side. BP. 27 Shrinks lower side. On the remote control BP. 28 6. Select the INPUT mode - Sharp PG-D4010X | PG-D4010X Operation Manual - Page 22
Size and Projection Distance". Ceiling-mount Setup ■ It is recommended that you use the optional Sharp ceiling-mount adaptor and unit for this installation. Before mounting the projector, contact your nearest Sharp Authorized Projector Dealer or Service Center to obtain the recommended ceilingmount - Sharp PG-D4010X | PG-D4010X Operation Manual - Page 23
Projection (PRJ) Mode The projector can use any of the 4 projection modes shown in the diagram below. Select the mode most appropriate for the projection setting in use. (You can set the PRJ mode in "SCRADJ" menu. See page 44.) ■ Table mounted, front projection [Menu item ➞ "Front"] ■ Ceiling - Sharp PG-D4010X | PG-D4010X Operation Manual - Page 24
Setting up the Projector (Continued) Screen Size and Projection Distance 4:3 Signal Input (Normal Mode) Picture (Screen) size Diag. [Ȥ] Width Height 500" (1270 cm) 1016 cm (400") 762 cm (300") - Sharp PG-D4010X | PG-D4010X Operation Manual - Page 25
"Computer Compatibility Chart" for a list of computer signals compatible with the projector. Use with computer signals other than those listed may cause some of when using a SHARP notebook computer). Refer to the specific instructions in your computer's operation manual to enable your computer - Sharp PG-D4010X | PG-D4010X Operation Manual - Page 26
using a DVIÙHDMI digital cable.) • For details on compatibility for connection, see support information on DVI connection provided by the video equipment manufacturer. • When you connect external equipment to the projector using a DVI digital cable, the image will look different from its original - Sharp PG-D4010X | PG-D4010X Operation Manual - Page 27
Cable ø3.5 mm ø3.5 mm stereo or mono audio cable audio output (commercially available or available terminal as Sharp service part QCNWGA038WJPZ) Terminal on the projector AUDIO 1 Monitor Amplifier RCA audio output terminal RCA audio cable (commercially available) AUDIO 2 Audio output - Sharp PG-D4010X | PG-D4010X Operation Manual - Page 28
an RS-232C serial control cable (cross type, commercially available), the computer can be used to control the projector and check the status of the projector. Refer to the "SETUP MANUAL" contained on the supplied CD-ROM for "RS-232C Specifications and Commands". When connecting to a computer using - Sharp PG-D4010X | PG-D4010X Operation Manual - Page 29
Category 5 (CAT.5) type cable (commercially available). Connections Connecting the Power Cord Plug the supplied power cord into the AC socket on the rear of the projector. Then plug into AC outlet. AC socket Power cord (supplied) To AC outlet 25 - Sharp PG-D4010X | PG-D4010X Operation Manual - Page 30
. Note • About the Lamp Indicator The lamp indicator illuminates to indicate the status of the lamp. Green: The lamp is on. Blinking in green: The lamp is warming up. Red: The lamp is shut down abnormally or the lamp should be replaced. • When switching on the projector, a slight flickering of - Sharp PG-D4010X | PG-D4010X Operation Manual - Page 31
of projection is adjustable up to 9 degrees from the surface on which the projector is placed. Note • When adjusting the height of the projector, trapezoidal distortion occurs. Follow the procedures in Keystone Correction to correct the distortion. (See pages 28 and 43.) 3 Adjusting the Picture - Sharp PG-D4010X | PG-D4010X Operation Manual - Page 32
You can also display the on-screen display of the Keystone Correction mode with KEYSTONE on the projector. 2 Press P/Q or O/R to adjust the Keystone Correction. • You can also adjust the Keystone Correction using the adjustment buttons on the projector. Note • To return to the default setting, press - Sharp PG-D4010X | PG-D4010X Operation Manual - Page 33
for the connected equipment. Press COMPUTER, DVI, S-VIDEO or VIDEO on the remote control to select the input mode. • When you press INPUT on the projector or DVI on the remote control, the INPUT list appears. Press P/R to switch the INPUT mode. COMPUTER, DVI, S-VIDEO, VIDEO buttons AV MUTE button - Sharp PG-D4010X | PG-D4010X Operation Manual - Page 34
Image Projection (Continued) Resize Mode This function allows you to modify or customize the resize mode to enhance the input image. Depending on the input signal, you can choose a desired image. Press RESIZE. • See page 43 for setting on menu screen. COMPUTER RESIZE button 4:3 aspect ratio - Sharp PG-D4010X | PG-D4010X Operation Manual - Page 35
, the image will look different from its original appearance. Keep this in mind while choosing an image size. • The use of the Resize or Keystone Correction function to compress or stretch the image for commercial purposes/public displays in a café, hotel, etc. may be an infringement of copyright - Sharp PG-D4010X | PG-D4010X Operation Manual - Page 36
break timer display function Press BREAK TIMER. Note • Break Timer does not function while the projector is operating the "Auto Sync", "FREEZE" or "AV MUTE" functions. 2 Press SPOT consumption will decrease, and the lamp life will extend. Note • Refer to "Eco+Quiet" on page 42 for details. 32 - Sharp PG-D4010X | PG-D4010X Operation Manual - Page 37
(Auto Sync Adjustment) Displaying an Enlarged Portion of an Image Auto Sync function works when detecting input signal after the projector turns on. Press AUTO SYNC to manually adjust with Auto Sync function. Note • When the optimum image cannot be achieved with Auto Sync adjustment, use the help - Sharp PG-D4010X | PG-D4010X Operation Manual - Page 38
projector with the remote control. For details, see the operation manual of the receiver. Connecting with a USB cable Computer To USB terminal Remote receiver To USB terminal (optional, AN-MR2) or USB cable (commercially available or available as Sharp service that do not support USB. • - Sharp PG-D4010X | PG-D4010X Operation Manual - Page 39
be set in the projector. "Picture" menu PAGE 1 Picture SCR PRJ Picture Mode Contrast 0 Bright 0 Color 0 Tint 0 Sharp 0 Red 0 Blue C.M.S. Page 41 Progressive *2 Page 42 DNR Page 42 Eco+Quiet Page 42 Reset 2D Progressive 3D Progressive Film Mode Off Level 1 Level 2 On Off - Sharp PG-D4010X | PG-D4010X Operation Manual - Page 40
Resize Page 43 Image Shift -96 +96 Page 43 Keystone -80 +80 Page 43 Overscan [On/Off] Page Italiano Svenska Português polski Magyar Türkçe "Projector adjustment (PRJ-ADJ)" menu Pict. SCR Auto Out Speaker Audio Input RS-232C Fan Mode System Lock Lamp Timer(Life) SEL./ADJ. PRJ-ADJ 0h ENTER Net. - Sharp PG-D4010X | PG-D4010X Operation Manual - Page 41
is dark The image is distorted It is difficult to hear audio Help Reset all adjustments to default settings SEL. ENTER END Main menu Network Page 49 49 DHCP Client [On/Off] Page 50 TCP/IP Page 50 MAC Address Page 50 Projector Page 50 The items you can set with the "Help" menu "Help" menu n - Sharp PG-D4010X | PG-D4010X Operation Manual - Page 42
"Bright". • This operation can also be performed by using the buttons on the projector. 1 Press MENU/HELP. • The "Picture" menu screen for the selected input CLR Temp BrilliantColorTM C.M.S. Setting C.M.S. DNR Eco+Quiet Reset SEL./ADJ. PRJ Net. Help Standard 0 0 0 0 0 1 On Off On - Sharp PG-D4010X | PG-D4010X Operation Manual - Page 43
again to return to the previous screen. Pict. SCR-ADJ Resize Image Shift Keystone PRJ Net. Border 0 0 Help Press ENTER. The item displayed by itself Reset SEL./ADJ. PRJ Net. Help Standard 0 15 0 0 0 1 On Off On Single ADJ END Note • Menu buttons do not function while the projector - Sharp PG-D4010X | PG-D4010X Operation Manual - Page 44
CLR Temp 2 BrilliantColorTM 4 C.M.S. Setting C.M.S. 5 Progressive 6 DNR 7 Eco+Quiet Reset PRJ Net. Help Standard 0 1 On 3D Progressive Off On SEL./ADJ. ENTER *sRGB Gives natural tint to the projected image. Gives sharpness to the projected image. For high fidelity reproduction of - Sharp PG-D4010X | PG-D4010X Operation Manual - Page 45
For more color intensity. For making skin tones greenish. For more sharpness. For stronger red. For stronger blue. For making the effect stronger cannot be set when "sRGB" is selected. • To reset all adjustment items, select "Reset" and press ENTER. Adjusting the Color Temperature Selectable - Sharp PG-D4010X | PG-D4010X Operation Manual - Page 46
SECAM) enhancement to progressive mode images. * The film source is a digital video recording with the original encoded as is at 24 frames/second. The projector can convert this film source to progressive video at 60 frames/second with NTSC and PAL60Hz or at 50 frames/second with PAL50Hz and SECAM - Sharp PG-D4010X | PG-D4010X Operation Manual - Page 47
up to an angle of approximately ±40 degrees (when "Resize" is set to "Normal"). • You can also press KEYSTONE on the remote control or on the projector to adjust Keystone Correction. 4 Setting the Overscan This function allows you to set the overscan area (display area). Selectable items On Off - Sharp PG-D4010X | PG-D4010X Operation Manual - Page 48
Area Zoom V-Stretch Stretch Keystone Correction -40 − +40 problem with the projector. • If any button is pressed to call up the onscreen display while viewing a Closed Caption broadcast, the closed captions will disappear. 7 Selecting the Background Image Selectable items Description Logo Sharp - Sharp PG-D4010X | PG-D4010X Operation Manual - Page 49
may take some time to complete, depending on the image of the computer connected to the projector. • When the optimum image cannot be achieved with Auto Sync adjustment, use manual adjustments. (See page 51.) 2 Auto Power Off Function Selectable items Description On When no input signal - Sharp PG-D4010X | PG-D4010X Operation Manual - Page 50
users have access. Info • If you lose or forget your keycode, contact your nearest Sharp Authorized Projector Dealer or Service Center (see page 61). Even if the product warranty is valid, the keycode reset will incur a charge. aSetting/Changing the keycode 1 Select "System Lock", then press ENTER - Sharp PG-D4010X | PG-D4010X Operation Manual - Page 51
it appears, enter the right keycode to start projection. Input screen for keycode System Lock ---- 12 Checking the Lamp Life Status 4 Press the 4 buttons on the remote control or on the projector to enter the new keycode in "New Code". Note • You cannot use the following buttons for keycode - Sharp PG-D4010X | PG-D4010X Operation Manual - Page 52
is in standby mode, you can release the keylock by holding down ENTER and STANDBY/ON on the projector simultaneously for about 5 seconds. Info • Keylock cannot be set while the projector is: displaying the "Menu" screens, in standby mode, warming up, changing input signals, operating "Auto Sync - Sharp PG-D4010X | PG-D4010X Operation Manual - Page 53
("Network" Menu) Menu operation n Page 38 Pict. SCR PRJ Network Help 1 Password Disable 2 DHCP Client Off 3 TCP/IP MAC Address X X : X X : X X : X X : X X : X X 4 Projector XX-XXXX SEL./ADJ. ENTER END 1 Setting a Password If you do not want others to change the setting for the - Sharp PG-D4010X | PG-D4010X Operation Manual - Page 54
MAC address of the projector is displayed. The projector name is displayed. 4 Enter "Subnet Mask" using P, R, Q and O, then press ENTER. 5 Enter "Gateway" using P, R, Q and O, then press ENTER. Note • For information on how to change the projector name, see "SETUP MANUAL" contained in the supplied - Sharp PG-D4010X | PG-D4010X Operation Manual - Page 55
The image is distorted It is difficult to hear audio Help Reset all adjustments to default settings SEL. ENTER END Press ENTER. Help the input signal or setting that you have selected. • If the problem is not solved, refer to "Troubleshooting" (see pages 59 and 60). • When selecting "sRGB" in - Sharp PG-D4010X | PG-D4010X Operation Manual - Page 56
not use volatile agents such as insecticides on the projector. Do not attach rubber or plastic items to the projector for long periods. The effects of some of agents in the plastic may cause damage to the quality or finish of the projector. ■ Wipe off dirt gently with a soft flannel cloth. ■ When the - Sharp PG-D4010X | PG-D4010X Operation Manual - Page 57
indicator will illuminate in red. ■ If you try to turn on the projector a fourth time without replacing the lamp, the projector will not turn on. Indicators on the Projector Power indicator Red on Normal (Standby) Green on Normal (Power on) Red blinks Abnormal (See page 54.) Green blinks - Sharp PG-D4010X | PG-D4010X Operation Manual - Page 58
the AC outlet, and then connect it again. • Remaining lamp life • Carefully replace the lamp. becomes 5% or less. (See page 55.) • Burnt-out lamp • Lamp circuit failure • Take the projector to your nearest Sharp Authorized Projector Dealer or Service Center (see page 61) for repair. • Please - Sharp PG-D4010X | PG-D4010X Operation Manual - Page 59
the instructions described in this section. * If you wish, you may have the lamp replaced at your nearest Sharp Authorized Projector Dealer or Service Center. * If the new lamp does not light after replacement, take your projector to the nearest Sharp Authorized Projector Dealer or Service Center - Sharp PG-D4010X | PG-D4010X Operation Manual - Page 60
remote control to put the projector into standby mode. 2 Disconnect the power cord. • Unplug the power cord from the AC socket. • Leave the lamp until it has fully cooled down (about 1 hour). 3 Remove the lamp unit cover. • Close the lens shutter. Loosen the user service screw (1) that secures the - Sharp PG-D4010X | PG-D4010X Operation Manual - Page 61
user service screw (3) to secure the lamp unit cover. Info • If the lamp unit and lamp unit cover are not correctly installed, the power will not turn on, even if the power cord is connected to the projector. Securing screws Resetting the Lamp Timer Reset the lamp timer after replacing the lamp - Sharp PG-D4010X | PG-D4010X Operation Manual - Page 62
60 75 60 60 60 60 70 75 60 75 60 75 60 60 60 60 67 75 75 75 Analog Support ✔ Digital Support ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ Display Upscale TRUE Intelligent Compression Upscale TRUE Intelligent Compression Note • Optimum image quality will be achieved by matching your computer's output - Sharp PG-D4010X | PG-D4010X Operation Manual - Page 63
Troubleshooting Problem Check Page • Projector power cord is not plugged into the wall outlet. 25 • Power to the external connected devices is off. - • The lens shutter is closed. 26, 29 • The selected input mode is wrong. 29 • Cables are incorrectly connected to the projector. 21-25 • - Sharp PG-D4010X | PG-D4010X Operation Manual - Page 64
Troubleshooting (Continued) Problem Check An unusual sound is • If the When temperature inside the projector increases, the cooling fan runs noisy. faster. The lamp does not light • The lamp indicator is illuminating in red. up even after the Replace the lamp. projector turns on. • The - Sharp PG-D4010X | PG-D4010X Operation Manual - Page 65
If you encounter any problems during setup or operation of this projector, first refer to the "Troubleshooting" section on pages 59 and 60. If this operation manual does not answer your question, please contact the SHARP Service departments listed below. U.S.A. Sharp Electronics Corporation 1-888 - Sharp PG-D4010X | PG-D4010X Operation Manual - Page 66
lamp Rated voltage Rated frequency Input current Power consumption (Standby*) Operation temperature Cabinet Dimensions (main body only) [W × H × D] Weight (approx.) *STANDBY Mode: Standard PG-D4010X 0.7" DLP® Chip XGA (1024 × 768) F 2.5 - 2.7 Manual, ×1.15 (f = 21.0 - 24.2 mm) Manual SHARP - Sharp PG-D4010X | PG-D4010X Operation Manual - Page 67
Dimensions Units: inches (mm) 1/4 (6) 13 13/64 (335) 1 43/64 (42.2) 4 17/32 (115) 3 15/16 (100) 1/8 (3) 4 17/32 (115) 15 3/4 (400) 3 23/64 (85) M4 M4 M4 M4 15/64 (5.75) 1 13/16 (45.75) 7 5/64 (179.75) 2 61/64 (75) 4 5/8 (116.25) 6 49/64 (171.5) 3 33/64 1 1/2 (89) (38) 63 Appendix - Sharp PG-D4010X | PG-D4010X Operation Manual - Page 68
KEYSTONE button 28 Keystone Correction 28, 43 Lamp 55 Lamp indicator 53 Lamp Timer (Life 47 Lamp 49 PDF sensor 15 Replacing the lamp 55, 56 Resize 30, 43 RESIZE button 30 RGB cable 21 RS-232C terminal 24 SCR - ADJ 43 Screen Size and Projection Distance 20 Security bar 13 Sharp - Sharp PG-D4010X | PG-D4010X Operation Manual - Page 69
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
 |
 |
Introduction
Quick Start
Setup
Connections
Basic
Operation
Useful
Features
Appendix
OPERATION MANUAL
DATA PROJECTOR
MODEL
PG-D4010X