Sharp PG-D50X3D PG-D45X3D PG-D50X3D Operation Manual
Sharp PG-D50X3D Manual
 |
UPC - 074000374027
View all Sharp PG-D50X3D manuals
Add to My Manuals
Save this manual to your list of manuals |
Sharp PG-D50X3D manual content summary:
- Sharp PG-D50X3D | PG-D45X3D | PG-D50X3D Operation Manual - Page 1
DATA PROJECTOR MODEL PG-D50X3D PG-D45X3D OPERATION MANUAL Introduction Quick Start Setup Connections Basic Operation Useful Features Appendix - Sharp PG-D50X3D | PG-D45X3D | PG-D50X3D Operation Manual - Page 2
IMPORTANT • For your assistance in reporting the loss or theft of your Projector, please record the Model and Serial Number located on the bottom of the projector and retain this information. • Before recycling the packaging, please ensure that you have checked the contents of the carton thoroughly - Sharp PG-D50X3D | PG-D45X3D | PG-D50X3D Operation Manual - Page 3
SPECIAL NOTE FOR USERS IN THE U.K. The mains lead occur. To fit an appropriate plug to the mains lead, follow the instructions below: WARNING: THIS APPARATUS MUST BE EARTHED. IMPORTANT: The wires in European Union Community Market SHARP ELECTRONICS (Europe) GmbH Sonninstraße 3, D-20097 Hamburg E.U. - Sharp PG-D50X3D | PG-D45X3D | PG-D50X3D Operation Manual - Page 4
Portuguese, Korean, Chinese and Arabic. Carefully read through the operation instructions before operating the projector. Die mitgelieferte CD-ROM enthält Bedienungsanleitungen in Englisch, Deutsch, , Chinês e Árabe. Leia cuidadosamente todas as instruções de operação antes de operar o projetor. iv - Sharp PG-D50X3D | PG-D45X3D | PG-D50X3D Operation Manual - Page 5
moisture. See bottom of projector. CAUTION RISK OF ELECTRIC SHOCK. DO NOT REMOVE SCREWS EXCEPT SPECIFIED USER SERVICE SCREW. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER. NO USER-SERVICEABLE PARTS EXCEPT LAMP UNIT. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning - Sharp PG-D50X3D | PG-D45X3D | PG-D50X3D Operation Manual - Page 6
manual, user instructions described on pages 55 to 57. * If you wish, you may have the lamp replaced at your nearest Sharp Authorized Projector Dealer or Service Center. * If the new lamp does not light after replacement, take your projector to the nearest Sharp Authorized Projector Dealer or Service - Sharp PG-D50X3D | PG-D45X3D | PG-D50X3D Operation Manual - Page 7
and operate all models in the same manner. • In this operation manual, the illustration and the screen display are simplified for explanation, projector. Note ....... Indicates additional information for setting up and operating the projector. For Future Reference Maintenance Troubleshooting - Sharp PG-D50X3D | PG-D45X3D | PG-D50X3D Operation Manual - Page 8
Manual ......3 Contents 4 IMPORTANT SAFEGUARDS 6 How to Access the PDF Operation Manuals 10 Accessories 11 Part Names and Functions 12 Projector 44 DLP® LinkTM 44 DLP® LinkTM Invert 44 Setting the Video Setup 44 Selecting the On-screen Display Language 44 Adjusting the Projector Function - Sharp PG-D50X3D | PG-D45X3D | PG-D50X3D Operation Manual - Page 9
Indicators 53 Regarding the Lamp 55 Lamp 55 Caution Concerning the Lamp 55 Replacing the Lamp 55 Removing and Installing the Lamp Unit 56 Resetting the Lamp Timer 57 Computer Compatibility Chart 58 Troubleshooting 59 For SHARP Assistance 61 Specifications 62 Dimensions 63 Index 64 5 - Sharp PG-D50X3D | PG-D45X3D | PG-D50X3D Operation Manual - Page 10
the following basic rules for its installation, use and servicing. 1. Read Instructions All the safety and operating instructions should be read before the product is operated. 2. Retain Instructions The safety and operating instructions should be retained for future reference. 3. Heed Warnings All - Sharp PG-D50X3D | PG-D45X3D | PG-D50X3D Operation Manual - Page 11
the operating instructions. Adjust only those controls that are covered by the operating instructions, as Upon completion of any service or repairs to this product, ask the service technician to perform DLP® and the DLP logo are registered trademarks of Texas Instruments and BrilliantColorTM and DLP - Sharp PG-D50X3D | PG-D45X3D | PG-D50X3D Operation Manual - Page 12
hazard of glass particles if lamp ruptures. In case of lamp rupture, contact your nearest Sharp Authorized Projector Dealer or Service Center for replacement. See "Regarding the Lamp" on page 55. Caution concerning the setup of the projector ■ For minimal servicing and to maintain high image - Sharp PG-D50X3D | PG-D45X3D | PG-D50X3D Operation Manual - Page 13
read the operation manuals of the projector and the equipment to be connected for instructions on how to make the connections. Using the projector in other countries If this state continues, the lamp will turn off, the cooling fan will run and then the projector will enter Standby mode. Refer to - Sharp PG-D50X3D | PG-D45X3D | PG-D50X3D Operation Manual - Page 14
Double click the pdf file to access the projector manuals. When you want to view the SETUP MANUAL 1) Double Projector Network Environment 9 Controlling the Projector via LAN 15 Setting up the Projector Using RS-232C or Telnet 20 Resetting the Lamp Timer of the Projector via LAN 30 Troubleshooting - Sharp PG-D50X3D | PG-D45X3D | PG-D50X3D Operation Manual - Page 15
Lamp unit ■ Ceiling-mount adaptor ■ Ceiling-mount bracket ■ Ceiling-mount unit ■ Ceiling-mount extension tube ■ Remote receiver ■ 3 RCA to mini D-sub 15 pin cable (10 n (3.0 m)) AN-D500LP AN-D400LP - Sharp PG-D50X3D | PG-D45X3D | PG-D50X3D Operation Manual - Page 16
to the main pages in this operation manual where the topic is explained. Projector Top View AUTO SYNC 33 button For automatically Adjustment buttons (P/R/O/Q) For selecting menu items. Power 26, 53 indicator Lamp 26, 53 indicator Temperature 53 warning indicator ECO+QUIET 32 button - Sharp PG-D50X3D | PG-D45X3D | PG-D50X3D Operation Manual - Page 17
this operation manual where the topic projector by the lens as this may damage the lens. Using the Kensington Lock • This projector has a Kensington Security Standard connector for use with a Kensington MicroSaver Security System. Refer to the information that came with the system for instructions - Sharp PG-D50X3D | PG-D45X3D | PG-D50X3D Operation Manual - Page 18
button 26 For putting the projector into the Standby mode. COMPUTER 32 For lowering the noise of the cooling fan and extending the lamp life. 14 26 ON button For turning the power on. 33 3D MODE button See the OPERATION MANUAL FOR STEREOSCOPIC 3D PROJECTION provided separately. 33 PICTURE - Sharp PG-D50X3D | PG-D45X3D | PG-D50X3D Operation Manual - Page 19
the remote control • Ensure that you do not drop it or expose it to moisture or high temperature. • The remote control may malfunction under a fluorescent lamp. In this case, move the projector away from the fluorescent lamp. 30° 30° 23 n (7 m) Remote control signal transmitters Remote control 15 - Sharp PG-D50X3D | PG-D45X3D | PG-D50X3D Operation Manual - Page 20
computer). For details, see the page described below for each step. Setup and Projection In this section, connection of the projector and the computer is explained using one example. 3 STANDBY/ON 8 button 8 STANDBY button 5 KEYSTONE button 3 ON button 5 Adjustment buttons (P/R/O/Q) 6 INPUT - Sharp PG-D50X3D | PG-D45X3D | PG-D50X3D Operation Manual - Page 21
control INPUT list INPUT On-screen display (RGB) COMPUTER COMPUTER RGB 1024 × 768 D DVI-D Computer D DVI-D Video • When you press INPUT on the projector, the INPUT list appears. Press / to switch the Input mode. BP. 29 7. Turn the computer on 8. Turn the power off Press STANDBY/ON on - Sharp PG-D50X3D | PG-D45X3D | PG-D50X3D Operation Manual - Page 22
-mount Setup ■ It is recommended that you use the optional Sharp ceiling-mount adaptor and unit for this installation. Before mounting the projector, contact your nearest Sharp Authorized Projector Dealer or Service Center to obtain the recommended ceilingmount adaptor and unit (sold separately - Sharp PG-D50X3D | PG-D45X3D | PG-D50X3D Operation Manual - Page 23
Projection (PRJ) Mode The projector can use any of the 4 projection modes shown in the diagram below. Select the mode most appropriate for the projection setting in use. (You can - Sharp PG-D50X3D | PG-D45X3D | PG-D50X3D Operation Manual - Page 24
Setting up the Projector (Continued) Screen Size and Projection Distance 4:3 Signal Input (Normal Mode) Picture (Screen) size Diag. [Ȥ] Width Height 500" (1270 cm) 1016 cm (400") 762 cm (300") - Sharp PG-D50X3D | PG-D45X3D | PG-D50X3D Operation Manual - Page 25
"Computer Compatibility Chart" for a list of computer signals compatible with the projector. Use with computer signals other than those listed may cause some of when using a SHARP notebook computer). Refer to the specific instructions in your computer's operation manual to enable your computer - Sharp PG-D50X3D | PG-D45X3D | PG-D50X3D Operation Manual - Page 26
using a DVIÙHDMI digital cable.) • For details on compatibility for connection, see support information on DVI connection provided by the video equipment manufacturer. • When you connect external equipment to the projector using a DVI digital cable, the image will look different from its original - Sharp PG-D50X3D | PG-D45X3D | PG-D50X3D Operation Manual - Page 27
Cable ø3.5 mm ø3.5 mm stereo or mono audio cable audio output (commercially available or available terminal as Sharp service part QCNWGA038WJPZ) Terminal on the projector AUDIO 1 Monitor Amplifier RCA audio output terminal RCA audio cable (commercially available) AUDIO 2 Audio output - Sharp PG-D50X3D | PG-D45X3D | PG-D50X3D Operation Manual - Page 28
an RS-232C serial control cable (cross type, commercially available), the computer can be used to control the projector and check the status of the projector. Refer to the "SETUP MANUAL" contained on the supplied CD-ROM for "RS-232C Specifications and Commands". When connecting to a computer using - Sharp PG-D50X3D | PG-D45X3D | PG-D50X3D Operation Manual - Page 29
Category 5 (CAT.5) type cable (commercially available). Connections Connecting the Power Cord Plug the supplied power cord into the AC socket on the rear of the projector. Then plug into AC outlet. AC socket Power cord (supplied) To AC outlet 25 - Sharp PG-D50X3D | PG-D45X3D | PG-D50X3D Operation Manual - Page 30
the lamp indicator illuminates, the projector is ready to start operation. Note • About the Lamp Indicator The lamp indicator illuminates to indicate the status of the lamp. Green: The lamp is on. Blinking in green: The lamp is warming up. Red: The lamp is shut down abnormally or the lamp should - Sharp PG-D50X3D | PG-D45X3D | PG-D50X3D Operation Manual - Page 31
lever 2 Remove your hands from the HEIGHT ADJUST lever of the projector after its height has been finely adjusted. • The angle of projection is adjustable Size You can adjust the picture size using the zoom ring on the projector. Rotate the zoom ring to enlarge or shrink the picture size. Make small adjustments. - Sharp PG-D50X3D | PG-D45X3D | PG-D50X3D Operation Manual - Page 32
1 Press KEYSTONE to enter the Keystone Correction mode. • You can also display the on-screen display of the Keystone Correction mode with KEYSTONE on the projector. 2 Press P/Q or O/R to adjust the Keystone Correction. • You can also adjust the Keystone Correction using the adjustment buttons on the - Sharp PG-D50X3D | PG-D45X3D | PG-D50X3D Operation Manual - Page 33
for the connected equipment. Press COMPUTER, DVI, S-VIDEO or VIDEO on the remote control to select the Input mode. • When you press INPUT on the projector or DVI on the remote control, the INPUT list appears. Press P/R to switch the Input mode. COMPUTER, DVI, S-VIDEO, VIDEO buttons AV MUTE button - Sharp PG-D50X3D | PG-D45X3D | PG-D50X3D Operation Manual - Page 34
image. Press RESIZE. • See page 43 for setting on menu screen. COMPUTER RESIZE button 4:3 aspect ratio Other aspect ratios Main resolution SVGA (800 × 600) XGA (1024 × 768) SXGA (1152 × 864) UXGA (1600 × 1200) SXGA (1280 × 1024) 1280 × 720 1360 × 768 1366 × 768 1280 × 768 1280 × 800 NORMAL 1024 - Sharp PG-D50X3D | PG-D45X3D | PG-D50X3D Operation Manual - Page 35
VIDEO/DTV Input signal Video/DTV Image type NORMAL For 4:3 screen AREA ZOOM V-STRETCH For 16:9 screen BORDER STRETCH *1 *1 480I, 480P, 576I, 576P, NTSC, PAL, SECAM 4:3 aspect ratio Squeeze *1 *1 *1 *1 Letter box 720P, 1035I, 1080I, 1080P *1 16:9 aspect ratio 16:9 aspect ratio - Sharp PG-D50X3D | PG-D45X3D | PG-D50X3D Operation Manual - Page 36
timer display function Press BREAK TIMER. Note • The Break Timer is not available while the projector is operating the following functions. - Auto Sync - Freeze - AV Mute 2 Press SPOT consumption will decrease, and the lamp life will extend. Note • Refer to "Eco+Quiet" on page 42 for details. 32 - Sharp PG-D50X3D | PG-D45X3D | PG-D50X3D Operation Manual - Page 37
(Auto Sync Adjustment) Displaying an Enlarged Portion of an Image Auto Sync function works when detecting input signal after the projector turns on. Press AUTO SYNC to manually adjust with Auto Sync function. Note • When the optimum image cannot be achieved with Auto Sync adjustment, use the help - Sharp PG-D50X3D | PG-D45X3D | PG-D50X3D Operation Manual - Page 38
projector with the remote control. For details, see the operation manual of the receiver. Connecting with a USB cable Computer To USB terminal Remote receiver To USB terminal (optional, AN-MR2) or USB cable (commercially available or available as Sharp service that do not support USB. • - Sharp PG-D50X3D | PG-D45X3D | PG-D50X3D Operation Manual - Page 39
Menu Items The following shows the items that can be set in the projector. "Picture" menu PAGE 1 Picture SCR PRJ Picture Mode Contrast 0 Bright 0 Color 0 Tint 0 Sharp 0 Red 0 Blue 0 Net. Help Standard SEL./ADJ. ENTER END Main menu Picture Page 40 Picture Mode Page 40 - Sharp PG-D50X3D | PG-D45X3D | PG-D50X3D Operation Manual - Page 40
Overscan OSD Display Closed Caption Background PRJ Mode DLP® Link TM DLP® Link TM Invert Video Setup Language SEL./ADJ Projector adjustment (PRJ-ADJ)" menu Pict. SCR Auto Sync Auto Power Off Auto Restart STANDBY Mode System Sound Audio Out Speaker Audio Input RS-232C Fan Mode System Lock Lamp - Sharp PG-D50X3D | PG-D45X3D | PG-D50X3D Operation Manual - Page 41
IP MAC Address X X : X X : X X : X X : X X : X X Projector XX-XXXX SEL./ADJ. ENTER END "Help" menu Pict. SCR PRJ Net. There is no picture or 49 DHCP Client [On/Off] Page 50 TCP/IP Page 50 MAC Address Page 50 Projector Page 50 The items you can set with the "Help" menu "Help" menu n Page - Sharp PG-D50X3D | PG-D45X3D | PG-D50X3D Operation Manual - Page 42
. MENU/HELP button Menu Selections (Adjustments) Example: Adjusting "Bright". • This operation can also be performed by using the buttons on the projector. 1 Press MENU/HELP. • The "Picture" menu screen for the selected Input mode is displayed. 2 Press Q or O and select "Picture" to adjust - Sharp PG-D50X3D | PG-D45X3D | PG-D50X3D Operation Manual - Page 43
+Quiet Reset SEL./ADJ. PRJ Net. Help Standard 0 15 0 0 0 1 On Off On Single ADJ END Note • The MENU/HELP button is not available while the projector is operating: - Auto Sync/Break Timer/Freeze/AV Mute Useful Features 39 - Sharp PG-D50X3D | PG-D45X3D | PG-D50X3D Operation Manual - Page 44
image Presentation Brightens portions of image for more enhanced presentations. Movie Game *sRGB Gives natural tint to the projected image. Gives sharpness to the projected image. For high fidelity reproduction of images from a computer. The default settings of each item when selecting Picture - Sharp PG-D50X3D | PG-D45X3D | PG-D50X3D Operation Manual - Page 45
making the effect weaker. Q button For more contrast. For more brightness. For more color intensity. For making skin tones greenish. For more sharpness. For stronger red. For stronger blue. For making the effect stronger. *1 Not displayed in the RGB input mode. *2 Not adjustable/selectable when - Sharp PG-D50X3D | PG-D45X3D | PG-D50X3D Operation Manual - Page 46
SECAM) enhancement to Progressive mode images. * The film source is a digital video recording with the original encoded as is at 24 frames/second. The projector can convert this film source to progressive video at 60 frames/second with NTSC and PAL60Hz or at 50 frames/second with PAL50Hz and SECAM - Sharp PG-D50X3D | PG-D45X3D | PG-D50X3D Operation Manual - Page 47
Keystone 4 Overscan 5 OSD Display 6 Closed Caption 7 Background 8 PRJ Mode 9 DLP® Link TM 0 DLP® Link TM Invert Video Setup Language SEL./ADJ. PRJ Net. Border 0 0 can also press KEYSTONE on the remote control or on the projector to adjust Keystone Correction. 4 Setting the Overscan This function - Sharp PG-D50X3D | PG-D45X3D | PG-D50X3D Operation Manual - Page 48
provided separately. 0 DLP® LinkTM Invert See the OPERATION MANUAL FOR STEREOSCOPIC 3D PROJECTION provided separately. Setting the Video Setup Note • Closed Caption may malfunction (white blocks, strange characters, etc.) if signal conditions are poor or if there are problems at the broadcast - Sharp PG-D50X3D | PG-D45X3D | PG-D50X3D Operation Manual - Page 49
may take some time to complete, depending on the image of the computer connected to the projector. • When the optimum image cannot be achieved with Auto Sync adjustment, use manual adjustments. (See page 51.) 2 Auto Power Off Function Selectable items Description On When no input signal - Sharp PG-D50X3D | PG-D45X3D | PG-D50X3D Operation Manual - Page 50
is turned on. We suggest you record the keycode in a safe place where only authorized users have access. Info • If you lose or forget your keycode, contact your nearest Sharp Authorized Projector Dealer or Service Center (see page 61). Even if the product warranty is valid, the keycode reset will - Sharp PG-D50X3D | PG-D45X3D | PG-D50X3D Operation Manual - Page 51
on the projector in setting your keycode, the keycode cannot be canceled with the remote control. PRJ - ADJ Setting the System Lock Old Code New Code Reconfirm **** ---- ---- You can confirm the cumulative lamp usage time and the remaining lamp life (percentage). Lamp usage condition - Sharp PG-D50X3D | PG-D45X3D | PG-D50X3D Operation Manual - Page 52
in Standby mode, you can release the keylock by holding down ENTER and STANDBY/ON on the projector simultaneously for about 5 seconds. Info • Keylock cannot be set while the projector is: displaying the "Menu" screens, in Standby mode, warming up, changing input signals, operating Auto Sync function - Sharp PG-D50X3D | PG-D45X3D | PG-D50X3D Operation Manual - Page 53
("Network" Menu) Menu operation n Page 38 Pict. SCR PRJ Network Help 1 Password Disable 2 DHCP Client Off 3 TCP/IP MAC Address X X : X X : X X : X X : X X : X X 4 Projector XX-XXXX SEL./ADJ. ENTER END 1 Setting a Password If you do not want others to change the setting for the - Sharp PG-D50X3D | PG-D45X3D | PG-D50X3D Operation Manual - Page 54
MAC address of the projector is displayed. The projector name is displayed. 4 Enter "Subnet Mask" using P, R, Q and O, then press ENTER. 5 Enter "Gateway" using P, R, Q and O, then press ENTER. Note • For information on how to change the projector name, see "SETUP MANUAL" contained in the supplied - Sharp PG-D50X3D | PG-D45X3D | PG-D50X3D Operation Manual - Page 55
check marks (✔). • The items in the "Help" menu change, depending on the input signal or setting that you have selected. • If the problem is not solved, refer to "Troubleshooting" (see pages 59 and 60). • When selecting "sRGB" in "Picture Mode", the item "Color is faded or poor" is not displayed - Sharp PG-D50X3D | PG-D45X3D | PG-D50X3D Operation Manual - Page 56
diluted with water, wring the cloth well and then wipe the projector. Strong cleaning detergents may discolor, warp or damage the coating on the projector. Make sure to test on a small, inconspicuous area on the projector before use. Cleaning the lens ■ Use a commercially available blower or lens - Sharp PG-D50X3D | PG-D45X3D | PG-D50X3D Operation Manual - Page 57
and temperature warning indicator) on the projector indicate problems inside the projector. ■ If a problem occurs, either the temperature warning indicator or the lamp indicator will illuminate red, and the projector will enter Standby mode. After the projector has entered Standby mode, follow the - Sharp PG-D50X3D | PG-D45X3D | PG-D50X3D Operation Manual - Page 58
the AC outlet, and then connect it again. • Remaining lamp life • Carefully replace the lamp. becomes 5% or less. (See page 55.) • Burnt-out lamp • Lamp circuit failure • Take the projector to your nearest Sharp Authorized Projector Dealer or Service Center (see page 61) for repair. • Please - Sharp PG-D50X3D | PG-D45X3D | PG-D50X3D Operation Manual - Page 59
unit to fully cool before removing the lamp unit. ■ Carefully change the lamp by following the instructions described in this section. * If you wish, you may have the lamp replaced at your nearest Sharp Authorized Projector Dealer or Service Center. * If the new lamp does not light after replacement - Sharp PG-D50X3D | PG-D45X3D | PG-D50X3D Operation Manual - Page 60
Do not remove the lamp unit from the projector right after use. The lamp and parts around the lamp will be very hot and may cause burns or injury. Optional accessory Lamp unit AN-D500LP (for PG-D50X3D) AN-D400LP (for PG-D45X3D) Info • Do not touch the glass surface of the lamp unit or the inside - Sharp PG-D50X3D | PG-D45X3D | PG-D50X3D Operation Manual - Page 61
tighten the user service screw (3) to secure the lamp unit cover. Info • If the lamp unit and lamp unit cover are not correctly installed, the power will not turn on, even if the power cord is connected to the projector. Securing screws 1 2 3 Resetting the Lamp Timer Reset the lamp timer after - Sharp PG-D50X3D | PG-D45X3D | PG-D50X3D Operation Manual - Page 62
Computer Compatibility Chart Computer • Multiple signal support Horizontal Frequency: 15-110 kHz, Vertical Frequency: 45-85 Hz, PC/MAC PC MAC 13" MAC 16" MAC 19" MAC 21" Mode VGA SVGA XGA WXGA WXGA+ SXGA SXGA+ WSXGA+ UXGA VGA SVGA XGA SXGA Resolution 640 × 400 720 × 400 640 × 480 800 × 600 1024 - Sharp PG-D50X3D | PG-D45X3D | PG-D50X3D Operation Manual - Page 63
Troubleshooting Problem Check Page • Projector power cord is not plugged into the wall outlet. 25 • Power to the external connected devices is off. - • The lens shutter is closed. 26, 29 • The selected Input mode is wrong. 29 • Cables are incorrectly connected to the projector. 21-25 • - Sharp PG-D50X3D | PG-D45X3D | PG-D50X3D Operation Manual - Page 64
Troubleshooting (Continued) Problem Check An unusual sound is • If the picture is control may be too far away from the projector. • If direct sunlight or a strong fluorescent lamp is shining on the projector's remote control sensor, place the projector where it will not be affected by strong - Sharp PG-D50X3D | PG-D45X3D | PG-D50X3D Operation Manual - Page 65
If you encounter any problems during setup or operation of this projector, first refer to the "Troubleshooting" section on pages 59 and 60. If this operation manual does not answer your question, please contact the SHARP Service departments listed below. U.S.A. Sharp Electronics Corporation 1-888 - Sharp PG-D50X3D | PG-D45X3D | PG-D50X3D Operation Manual - Page 66
lamp Rated voltage Rated frequency Input current Power consumption (Standby*) AC 100 V AC 240 V Operation temperature Cabinet Dimensions (main body only) [W × H × D] Weight (approx.) *STANDBY Mode: Standard PG-D50X3D PG-D45X3D 0.7" DLP® Chip XGA (1024 × 768) F 2.5 - 2.7 Manual - Sharp PG-D50X3D | PG-D45X3D | PG-D50X3D Operation Manual - Page 67
Dimensions Units: inches (mm) 1/4 (6) 13 13/64 (335) 1 43/64 (42.2) 4 17/32 (115) 3 15/16 (100) 1/8 (3) 4 17/32 (115) 15 3/4 (400) 3 23/64 (85) M4 M4 M4 M4 15/64 (5.75) 1 13/16 (45.75) 7 5/64 (179.75) 2 61/64 (75) 4 5/8 (116.25) 6 49/64 (171.5) 3 33/64 1 1/2 (89) (38) 63 Appendix - Sharp PG-D50X3D | PG-D45X3D | PG-D50X3D Operation Manual - Page 68
22 Contrast 41 DHCP Client 50 DLP® LinkTM 44 DLP® LinkTM Invert 44 DNR 42 DOT Lamp 55 Lamp indicator 53 Lamp Timer (Life 47 Lamp PAGE UP button 34 Password 49 PDF 10 Picture Adjustment 40 Picture Mode Projection Distance 20 Security bar 13 Sharp 41 Speaker 46 SPOT button 32 STANDBY - Sharp PG-D50X3D | PG-D45X3D | PG-D50X3D Operation Manual - Page 69
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
 |
 |
Introduction
Quick Start
Setup
Connections
Basic
Operation
Useful
Features
Appendix
OPERATION MANUAL
DATA PROJECTOR
MODEL
PG-D50X3D
PG-D45X3D