Sharp PG-F261X PG-F211X , PG-F261X Operation Manual
Sharp PG-F261X - Notevision XGA DLP Projector Manual
 |
UPC - 074000365377
View all Sharp PG-F261X manuals
Add to My Manuals
Save this manual to your list of manuals |
Sharp PG-F261X manual content summary:
- Sharp PG-F261X | PG-F211X , PG-F261X Operation Manual - Page 1
DATA PROJECTOR MODEL PG-F261X PG-F211X OPERATION MANUAL Introduction Quick Start Setup Connections Basic Operation Useful Features Appendix - Sharp PG-F261X | PG-F211X , PG-F261X Operation Manual - Page 2
a 10A fuse. Should the fuse need to be replaced, a BSI or ASTA approved BS 1362 fuse marked or instructions before operating the projector. Le CD-ROM fourni contient les instructions de fonctionnement en anglais, français, espagnol et chinois. Veuillez lire attentivement ces instructions - Sharp PG-F261X | PG-F211X , PG-F261X Operation Manual - Page 3
operation manual carefully. Introduction ENGLISH There are two important reasons for prompt warranty registration of your new SHARP Projector, using the REGISTRATION CARD packed with the projector. 1. WARRANTY This is to assure that you immediately receive the full benefit of the parts, service - Sharp PG-F261X | PG-F211X , PG-F261X Operation Manual - Page 4
Class A digital device, pursuant accordance with the operation manual, may cause harmful Lamp Replacement See "Replacing the Lamp" on page 50. This SHARP projector uses a DLP life expectancy of the unit. Authorized representative responsible for the European Union Community Market SHARP - Sharp PG-F261X | PG-F211X , PG-F261X Operation Manual - Page 5
operation manual, the input Menu item Picture SCR - ADJ Picture Mode Contrast Bright Red Blue CLR Temp Bright Boost Lamp Setting Reset projector. Note .........Indicates additional information for setting up and operating the projector. For Future Reference Maintenance P. 47 Troubleshooting - Sharp PG-F261X | PG-F211X , PG-F261X Operation Manual - Page 6
Setup Guide 26 Adjusting the Projected Image 26 Correcting Trapezoidal Distortion ........ 28 Switching the Input Mode 29 Adjusting the Volume 29 Displaying the Black Screen and Turning off the Sound Temporarily .... 29 Resize Mode 30 Useful Features Operating with the Remote Control .... 32 - Sharp PG-F261X | PG-F211X , PG-F261X Operation Manual - Page 7
50 Replacing the Lamp 50 Removing and Installing the Lamp Unit 51 Resetting the Lamp Timer 52 Storing the Projector 53 How to Use the Storage Case 53 Connecting Pin Assignments 54 RS-232C Specifications and Command Settings 56 Computer Compatibility Chart 61 Troubleshooting 62 For SHARP - Sharp PG-F261X | PG-F211X , PG-F261X Operation Manual - Page 8
servicing. 1. Read Instructions All the safety and operating instructions should be read before the product is operated. 2. Retain Instructions The safety and operating instructions Any mounting of the product should follow the manufacturer's instructions, and should use a mounting accessory - Sharp PG-F261X | PG-F211X , PG-F261X Operation Manual - Page 9
damaged in any way. f. When the product exhibits a distinct change in performance, this indicates a need for service. 19. Replacement Parts When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics - Sharp PG-F261X | PG-F211X , PG-F261X Operation Manual - Page 10
of glass par- ticles if lamp ruptures. In case of lamp rupture, contact your nearest Sharp Authorized Projector Dealer or Service Center for replacement. See "Replacing the Lamp" on page 50. Caution concerning the setup of the projector ■ For minimal servicing and to maintain high image quality - Sharp PG-F261X | PG-F211X , PG-F261X Operation Manual - Page 11
temperature, and its performance is automatically controlled. The sound of the fan may change during projector operation due to changes in the fan speed. This does not indicate malfunction. How to Access the PDF Operation Manuals PDF operation manuals in several languages are included in the - Sharp PG-F261X | PG-F211X , PG-F261X Operation Manual - Page 12
case • Operation manual (this manual and CD-ROM ) Note • Codes in "< >" are Replacement parts codes. Optional accessories ■ 3 RCA to mini D-sub 15 pin cable (10n (3.0 m)) ■ Remote receiver ■ Lamp unit ■ Ceiling-mount bracket ■ Extension tube AN - Sharp PG-F261X | PG-F211X , PG-F261X Operation Manual - Page 13
the picture. Remote control 15 sensor Exhaust vent 47 25, 48 Lamp indicator 48 Temperature warning indicator 32 ECO+QUIET button For lowering the noise of the cooling fan and extending the lamp life. 29 VOL (Volume) buttons (-O/Q+) For adjusting the speaker sound level. 29 INPUT buttons - Sharp PG-F261X | PG-F211X , PG-F261X Operation Manual - Page 14
RS-232C terminal Terminal for controlling the projector using a computer. 34 USB terminal Terminal connecting with the USB terminal on the computer for using the supplied remote control as the computer mouse. 23 AUDIO 2 input terminal 22 VIDEO input terminal Terminal for connecting video equipment - Sharp PG-F261X | PG-F211X , PG-F261X Operation Manual - Page 15
projector into the standby mode. COMPUTER, DVI, 29 S-VIDEO, VIDEO buttons For switching to the respective input of the cooling fan and extending the lamp life. 25 ON button For turning the power connection (using a USB cable or the optional remote receiver). • For returning to the previous menu - Sharp PG-F261X | PG-F211X , PG-F261X Operation Manual - Page 16
. • The batteries included with this projector may run down in a short period, depending on how they are kept. Be sure to replace them as soon as possible with new batteries. • Remove the batteries from the remote control if you will not be using the remote control for a long time. • Comply with - Sharp PG-F261X | PG-F211X , PG-F261X Operation Manual - Page 17
using the remote control • Ensure that you do not drop it or expose it to moisture or high temperature. • The remote control may malfunction under a fluorescent lamp. In this case, move the projector away from the fluorescent lamp. 30° 23n (7 m) Remote control Remote control signal transmitters - Sharp PG-F261X | PG-F211X , PG-F261X Operation Manual - Page 18
screen _P. 18 2. Connect the projector to the computer and plug the power cord into the AC socket of the projector When connecting equipment other than a computer, see pages 22 and 23. _PP. 21, 24 3. Remove the lens cap and turn the projector on On the projector On the remote control _P. 25 16 - Sharp PG-F261X | PG-F211X , PG-F261X Operation Manual - Page 19
list appears. Press '/" to switch the INPUT mode. _P. 29 7. Turn the computer on 8. Turn the power off Press STANDBY/ON on the projector or STANDBY on the remote control, and then press the button again while the confirmation message is displayed to put the projector into standby mode. On the On - Sharp PG-F261X | PG-F211X , PG-F261X Operation Manual - Page 20
"Screen Size and Projection Distance". Ceiling-mount Setup ■ It is recommended that you use the optional Sharp ceiling-mount bracket for this installation. Before mounting the projector, contact your nearest Sharp Authorized Projector Dealer or Service Center to obtain the recommended ceiling - Sharp PG-F261X | PG-F211X , PG-F261X Operation Manual - Page 21
Projection (PRJ) Mode The projector can use any of the 4 projection modes shown in the diagram below. Select the mode most appropriate for the projection setting in use. (You can set the PRJ mode in "SCR-ADJ" menu. See page 42.) ■ Table mounted, front projection [Menu item ➞ "Front"] ■ Ceiling - Sharp PG-F261X | PG-F211X , PG-F261X Operation Manual - Page 22
Setting up the Projector (Continued) Screen Size and Projection Distance NORMAL Mode (4:3) Picture (Screen) size Diag. [χ] Width Height Projection distance [L] Minimum [L1] Maximum [L2] 300Љ (762 cm) 610 cm ( - Sharp PG-F261X | PG-F211X , PG-F261X Operation Manual - Page 23
input mode has been selected on the projector before you turn on the connected equipment. • For more details of connection and cables, refer to the operation manual when using a SHARP notebook computer). Refer to the specific instructions in your computer's operation manual to enable your - Sharp PG-F261X | PG-F211X , PG-F261X Operation Manual - Page 24
input to the projector. (Connect the AUDIO input terminal for audio input.) • Depending on specifications of video equipment or HDMI to DVI digital cable, the signal transmission may not work property. (The HDMI specification does not support all connections to video equipment that has HDMI digital - Sharp PG-F261X | PG-F211X , PG-F261X Operation Manual - Page 25
(commercially available or available terminal as Sharp service part QCNWGA038WJPZ) Terminal on the projector AUDIO 1 Monitor Amplifier RCA audio output . • You can select "Audio 1" or "Audio 2" for "Audio Input" in the "PRJ-ADJ" menu. (See page 43.) • RGB signals and Component signals can be - Sharp PG-F261X | PG-F211X , PG-F261X Operation Manual - Page 26
up. Refer to the operation manual of the computer for details. • See page 55 for connection of an RS-232C serial control cable. Info • Do not the computer. This may damage your computer or projector. • Do not connect or disconnect an RS-232C serial control cable to or from the computer while it is - Sharp PG-F261X | PG-F211X , PG-F261X Operation Manual - Page 27
Turning the Power off (Putting the Projector into Standby Mode) Press STANDBY/ON on the projector or STANDBY on the remote control, then press that button again while the confirmation message is displayed, to put the projector into standby mode. • The projector cannot be turned on while cooling - Sharp PG-F261X | PG-F211X , PG-F261X Operation Manual - Page 28
Image Projection Setup Guide screen About the Setup Guide After turning on the projector, the Setup Guide screen appears to assist you with projector setup. Guidance items 1 FOCUS 2 HEIGHT ADJUST 3 ZOOM Press ENTER to exit the Setup Guide screen. Note • The Setup Guide screen automatically high- - Sharp PG-F261X | PG-F211X , PG-F261X Operation Manual - Page 29
can be adjusted using the adjustment feet at the front and rear of the projector. When the screen is above the projector, the projection image can be made higher by adjusting the projector. 1 Lift the projector to adjust its height while lifting the HEIGHT ADJUST lever. 2 Remove your hands from - Sharp PG-F261X | PG-F211X , PG-F261X Operation Manual - Page 30
1 Press KEYSTONE to enter the Keystone Correction mode. • You can also display the on-screen display of the Keystone Correction mode with KEYSTONE on the projector. 2 Press P/Q or O/R to adjust the Keystone Correction. • You can also adjust the Keystone Correction using the adjustment buttons on the - Sharp PG-F261X | PG-F211X , PG-F261X Operation Manual - Page 31
the connected equipment. Press COMPUTER, DVI, S-VIDEO or VIDEO on the remote control to select the input mode. • When you press INPUT on the projector or DVI on the remote control, the INPUT list appears. Press P/R to switch the INPUT mode. COMPUTER, DVI, S-VIDEO, VIDEO buttons AV MUTE button VOL - Sharp PG-F261X | PG-F211X , PG-F261X Operation Manual - Page 32
(1024 K 768) SXGA (1152 K 864) SXGA L (1400 K 1050) SXGA (1280 K 1024) WXGA (1280 K 768) Input Signal Computer Image type NORMAL 1024 K 768 J NORMAL Resolution lower than XGA XGA * 4:3 aspect ratio BORDER 768 K 576 J Output screen image BORDER STRETCH 1024 K 576 STRETCH * Resolution higher - Sharp PG-F261X | PG-F211X , PG-F261X Operation Manual - Page 33
VIDEO • "STRETCH" is fixed when 540P, 720P, 1035I or 1080I signals are entered. Input Signal DVD / Video Image type NORMAL * Output screen image BORDER * STRETCH 4:3 aspect ratio * * 480I, 480P, 576I, Letter box 576P, NTSC, PAL, SECAM * Squeezed 16:9 image * - Sharp PG-F261X | PG-F211X , PG-F261X Operation Manual - Page 34
Mode Press ECO+QUIET on the remote control or on the projector to switch the Eco+Quiet mode between on and off. • When the Eco+Quiet Mode is set to "ON", the sound of the cooling fan will turn down, the power consumption will decrease, and the lamp life will extend. Canceling the break timer - Sharp PG-F261X | PG-F211X , PG-F261X Operation Manual - Page 35
. Press PICTURE MODE. • When pressing PICTURE MODE, the picture mode changes in the following order: STANDARD PRESENTATION MOVIE GAME sRGB * Note • input. Auto Sync (Auto Sync Adjustment) Auto Sync function works when detecting input signal after the projector turns on. Press AUTO SYNC to manually - Sharp PG-F261X | PG-F211X , PG-F261X Operation Manual - Page 36
projector with the remote control. For details, see the operation manual of the receiver. Connecting with a USB cable Computer To USB terminal Remote receiver To USB terminal (optional, AN-MR2) or USB cable (commercially available or available as Sharp service that do not support USB. • Versions - Sharp PG-F261X | PG-F211X , PG-F261X Operation Manual - Page 37
S-VIDEO, VIDEO input Picture SCR - ADJ Picture Mode Contrast Bright Color Tint Sharp CLR Temp Bright Boost Progressive Lamp Setting Reset PRJ - ADJ menu screen only when PAL or SECAM signals are input (including when forcibly changed to those input signals). There is basically no need to adjust - Sharp PG-F261X | PG-F211X , PG-F261X Operation Manual - Page 38
Menu Items (Continued) "Projector adjustment (PRJ-ADJ)" menu Picture SCR - ADJ Auto Power Off Auto Restart STANDBY Mode System Sound Speaker Audio Input RS-232C Fan Mode System Lock PRJ - ADJ On On Standard On On Audio 1 9600bps Normal Disable Help Lamp Timer(Life) 0h 0 min 100% SEL./ADJ - Sharp PG-F261X | PG-F211X , PG-F261X Operation Manual - Page 39
using the buttons on the projector. 1 Press MENU/HELP. • The "Picture" menu screen for the selected input mode is displayed. 2 Press menu for COMPUTER (RGB) input Menu item Picture SCR - ADJ Picture Mode Contrast Bright Red Blue CLR Temp Bright Boost Lamp Setting Reset PRJ - ADJ Standard 0 - Sharp PG-F261X | PG-F211X , PG-F261X Operation Manual - Page 40
SCR - ADJ Picture Mode Contrast Bright Red Blue CLR Temp Bright Boost Lamp Setting Reset PRJ - ADJ Standard 0 0 0 0 0 1 Bright Help SEL./ - ADJ PRJ - ADJ Picture Mode Contrast Bright Red Blue CLR Temp Bright Boost Lamp Setting Reset Standard 0 15 0 0 0 1 Bright Help 5 Press MENU/HELP. • The - Sharp PG-F261X | PG-F211X , PG-F261X Operation Manual - Page 41
- Bright • "sRGB" is displayed only when RGB signal is input. • You can set or adjust each item in the "Picture" menu to your preference. Any changes you make are retained in memory. Note • You can also press PICTURE MODE on the remote control to select the picture mode. (See page 33.) • *sRGB - Sharp PG-F261X | PG-F211X , PG-F261X Operation Manual - Page 42
changed to those input signals). There is basically no need to adjust "Tone", but you can adjust the picture tone with this adjustment when inputting PAL or SECAM signals . Note • "Bright Boost" and "CLR Temp" cannot be set when "sRGB" is selected. • To reset all adjustment items, select "Reset - Sharp PG-F261X | PG-F211X , PG-F261X Operation Manual - Page 43
Help 1 Resize 2 Image Shift 3 Keystone 4 OSD Display 5 Background 6 Setup Guide 7 PRJ Mode 8 Language Border 0 0 On Logo On Front English Menu operation to "Normal"). • You can also press KEYSTONE on the remote control or on the projector to adjust Keystone Correction. Note • You cannot set this - Sharp PG-F261X | PG-F211X , PG-F261X Operation Manual - Page 44
Description All on-screen displays are displayed. INPUT/VOLUME/AV MUTE/FREEZE/ AUTO SYNC/RESIZE Sharp logo screen Blue screen - 6 Selecting the Setup Guide Selectable items On Off Description Displaying the Setup Guide when turning the projector on. Not displaying the Setup Guide. The projector - Sharp PG-F261X | PG-F211X , PG-F261X Operation Manual - Page 45
Projector Function ("PRJ - ADJ" Menu) Picture SCR - ADJ Auto Power Off Auto Restart STANDBY Mode System Sound Speaker Audio Input RS-232C Fan Mode System Lock PRJ - ADJ On On Standard On On Audio 1 9600 bps Normal Disable Help Lamp Timer(Life the projector enters standby mode, the message " - Sharp PG-F261X | PG-F211X , PG-F261X Operation Manual - Page 46
is valid, the keycode reset will incur a charge. a Setting/Changing the keycode 1 Select "System Lock", then press ENTER or Q. 2 Select "Next", then press ENTER. • The screen for entering the keycode appears. 3 Press the 4 buttons on the remote control or on the projector to enter the preset - Sharp PG-F261X | PG-F211X , PG-F261X Operation Manual - Page 47
function recognizes each button on the remote control or on the projector as an individual button, even if projector simultaneously for about 5 seconds. Info • Keylock cannot be set while the projector is: displaying the "Setup Guide" or "Menu" screens, in standby mode, warming up, changing input - Sharp PG-F261X | PG-F211X , PG-F261X Operation Manual - Page 48
or poor Picture is dark The image is distorted Help Reset all adjustments to default settings SEL. ENTER END Press ENTER in the "Help" menu change, de- pending on the input signal or setting that you have selected. • If the problem is not solved, refer to "Troubleshooting" (see pages 62 and - Sharp PG-F261X | PG-F211X , PG-F261X Operation Manual - Page 49
diluted with water Wax Thinner Info • If you want to clean the air vents during projector operation, ensure you press STANDBY/ON on the projector or STANDBY on the remote control and put the projector into standby mode. After the cooling fan has stopped, clean the vents. Appendix Mild detergent - Sharp PG-F261X | PG-F211X , PG-F261X Operation Manual - Page 50
becomes 0%, it will change to (red), the lamp will automatically turn off and then the projector will automatically enter standby mode. At this time, the lamp indicator will illuminate in red. ■ If you try to turn on the projector a fourth time without replacing the lamp, the projector will not turn - Sharp PG-F261X | PG-F211X , PG-F261X Operation Manual - Page 51
AC outlet, and then connect it again. • Carefully replace the lamp. (See page 51.) • Take the projector to your nearest Sharp Authorized Projector Dealer or Service Center (see page 64) for repair. • Please exercise care when replacing the lamp. • Securely install the cover. • If the power indicator - Sharp PG-F261X | PG-F211X , PG-F261X Operation Manual - Page 52
removing the lamp unit. ■ Carefully change the lamp by following the instructions described in this section. * If you wish, you may have the lamp replaced at your nearest Sharp Authorized Projector Dealer or Service Center. * If the new lamp does not light after replacement, take your projector to - Sharp PG-F261X | PG-F211X , PG-F261X Operation Manual - Page 53
on the remote control to put the projector into standby mode. • Wait until the cooling fan stops. 2 Disconnect the power cord. • Unplug the power cord from the AC socket. • Leave the lamp until it has fully cooled down (about 1 hour). STANDBY/ON button AC socket User service screw (for lamp unit - Sharp PG-F261X | PG-F211X , PG-F261X Operation Manual - Page 54
user service screw (3) to secure the lamp unit cover. Info • If the lamp unit and lamp unit cover are not correctly installed, the power will not turn on, even if the power cord is connected to the projector. Securing screws Resetting the Lamp Timer Reset the lamp timer after replacing the lamp - Sharp PG-F261X | PG-F211X , PG-F261X Operation Manual - Page 55
. 2 Place the projector into the storage case. Info • Ensure the projector has cooled down sufficiently change color or become deformed. 3 Close the cover of the storage case. 4 Place the accessories in the front pocket of the storage case. Lens cap Fixing band Supplied accessories (Remote control - Sharp PG-F261X | PG-F211X , PG-F261X Operation Manual - Page 56
connected DVI-I Terminal: 29 pin connector 23 18 24 17 C3 C5 C4 C2 C1 87 21 16 9 • DVI Digital Input Pin No. Signal 1. T.M.D.S data 2- 2. T.M.D.S data 2+ 3. T.M.D.S data 2 shield 4. Not connected 5. Not connected 6. DDC clock 7. DDC data 8. Not connected 9. T.M.D.S data 1- 10 - Sharp PG-F261X | PG-F211X , PG-F261X Operation Manual - Page 57
RD SD SG RS CS Name I/O Receive Data Send Data Input Output Signal Ground Request to Send Clear to Send Reference Not connected Note • Depending on the controlling device used, it may be necessary to connect Pin 4 and Pin 6 on the controlling device (e.g. computer). Projector Pin No. 4 5 - Sharp PG-F261X | PG-F211X , PG-F261X Operation Manual - Page 58
digit Response code format Normal response Parameter 4-digit Problem response (communication error or incorrect command) O K Return code (0DH) E R R Return code (0DH) Info • When controlling the projector input selection command and then receiving an "OK" response code, the projector be reset. - - Sharp PG-F261X | PG-F211X , PG-F261X Operation Manual - Page 59
Example: When turning on the projector, make the following setting. Computer P OWR _ _ _ 1 → ← Projector OK CONTROL CONTENTS Power Projector Condition On Off Status Lamp Name Input Change Status Power Status Quantity Usage Time(Hour) Usage Time(Minute) Life(Percentage) Model Name Check Model - Sharp PG-F261X | PG-F211X , PG-F261X Operation Manual - Page 60
and Command Settings (Continued) CONTROL CONTENTS COMMAND PARAMETER Power ON Resize ALL Reset Computer INPUT DVI INPUT S-Video Normal R A S A C O _ * * * OK or ERR Tint -30 - +30 R A T I _ * * * OK or ERR Sharp -30 - +30 R A S H _ * * * OK or ERR CLR Temp -2 - +2 R A C T _ - Sharp PG-F261X | PG-F211X , PG-F261X Operation Manual - Page 61
CONTROL CONTENTS COMMAND PARAMETER Power ON S-Video INPUT Picture Mode Video INPUT Contrast Bright Color Tint Sharp CLR Temp Bright Boost Progressive Picture Reset Audio Input Picture Mode Contrast Bright Color Tint Sharp CLR Temp Bright Boost Progressive Picture Reset Audio Input Clock - - Sharp PG-F261X | PG-F211X , PG-F261X Operation Manual - Page 62
Français Italiano Svenska Português polski Türkçe Setup Guide On Off System Sound On Off Internal Speaker On Off RGB Frequency Horizontal Check Vertical Fan Mode Normal High Lamp Timer Reset *3 COMMAND PARAMETER Power ON A P O W _ _ _ 1 OK or ERR A P O W _ _ _ 0 OK - Sharp PG-F261X | PG-F211X , PG-F261X Operation Manual - Page 63
is a list of modes that conform to VESA. However, this projector supports other signals that are not VESA standards. PC/MAC PC MAC 13 SXGA 1152 × 864 1280 × 1024 SXGA+ 1400 × 1050 VGA 640 × 480 SVGA 832 × 624 XGA 1024 × 768 SXGA 1152 × 870 Horizontal Frequency (kHz) 27.0 31.5 37.5 27.0 31.5 37 - Sharp PG-F261X | PG-F211X , PG-F261X Operation Manual - Page 64
are incorrectly connected to the projector. • Remote control battery has run out. • External output has not been set when connecting notebook computer. • The lamp unit cover is not installed correctly. • If the connected DVI digital equipment is turned on before the "DVI-D" input mode is selected on - Sharp PG-F261X | PG-F211X , PG-F261X Operation Manual - Page 65
will eventually need to be changed. time to turn on. While the remaining lamp life draws to a close, replace the lamp. Picture is dark. The remote control cannot be used. • Operate the remote control while pointing it at the projector's remote control sensor. • The remote control may be too far - Sharp PG-F261X | PG-F211X , PG-F261X Operation Manual - Page 66
If you encounter any problems during setup or operation of this projector, first refer to the "Troubleshooting" section on pages 62 and 63. If this operation manual does not answer your question, please contact the SHARP Service departments listed below. U.S.A. Sharp Electronics Corporation 1-888 - Sharp PG-F261X | PG-F211X , PG-F261X Operation Manual - Page 67
lamp Rated voltage Rated frequency Input current Power consumption (Standby) Operation temperature Cabinet Dimensions (main body only) Weight (approx.) PG-F261X/PG-F211X 0.55" DLP® Chip XGA (1024 × 768) F 2.5 - 2.6 Manual , SHARP reserves the right to make design and specification changes for - Sharp PG-F261X | PG-F211X , PG-F261X Operation Manual - Page 68
Dimensions Units: inches (mm) 1/4 (6) 10 7/16 (265) 1 31/64 2 5/8 (66.35) (37.65) 3 33/64 (89) 4 7/64 (104) 66 2 61/64 (75) 10 41/64 (270) 2 3/8 (60) M4 M4 M4 M4 13/32 (10) 13/32 (10) 2 61/64 (75) 1 27/64 (36) 1 3/16 (30) 1 15/16 (49) - Sharp PG-F261X | PG-F211X , PG-F261X Operation Manual - Page 69
34, 37 Rear adjustment foot 27 Red 40 Remote control 13 Remote control sensor 15 Replacing the lamp 50, 51 Resize 30, 41 RESIZE button 30 RGB cable 21 RS-232C terminal 24 SCR - ADJ 41 Screen Size and Projection Distance 20 Setup Guide 26, 42 Sharp 40 Speaker 43 SPOT button 32 STANDBY - Sharp PG-F261X | PG-F211X , PG-F261X Operation Manual - Page 70
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
 |
 |
DATA PROJECTOR
MODEL
PG-F261X
PG-F211X
OPERATION MANUAL
Introduction
Quick Start
Setup
Connections
Basic
Operation
Useful
Features
Appendix