Sharp PG-F320W PG-F320W Operation Manual
Sharp PG-F320W - Notevision WXGA DLP Projector Manual
 |
UPC - 074000365414
View all Sharp PG-F320W manuals
Add to My Manuals
Save this manual to your list of manuals |
Sharp PG-F320W manual content summary:
- Sharp PG-F320W | PG-F320W Operation Manual - Page 1
DATA PROJECTOR MODEL PG-F320W OPERATION MANUAL Introduction Quick Start Setup Connections Basic Operation Useful Features Appendix - Sharp PG-F320W | PG-F320W Operation Manual - Page 2
IMPORTANT • For your assistance in reporting the loss or theft of your Projector, please record the Model and Serial Number located on the bottom of the projector and retain this information. • Before recycling the packaging, please ensure that you have checked the contents of the carton thoroughly - Sharp PG-F320W | PG-F320W Operation Manual - Page 3
FOR USERS IN THE U.K. The mains lead of this product is fitted with a non-rewireable (moulded) plug incorporating a 10A fuse. Should the fuse need to be replaced, to the mains lead, follow the instructions below: WARNING: THIS APPARATUS MUST BE EARTHED. IMPORTANT: The wires in this mains lead are - Sharp PG-F320W | PG-F320W Operation Manual - Page 4
English, German, French, Spanish, Italian, Dutch, Swedish, Portuguese, Chinese and Korean. Carefully read through the operation instructions before operating the projector. Die mitgelieferte CD-ROM enthält Bedienungsanleitungen in Englisch, Deutsch, Französisch, Spanisch, Italienisch, Niederländisch - Sharp PG-F320W | PG-F320W Operation Manual - Page 5
moisture. See bottom of projector. CAUTION RISK OF ELECTRIC SHOCK. DO NOT REMOVE SCREWS EXCEPT SPECIFIED USER SERVICE SCREW. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER. NO USER-SERVICEABLE PARTS EXCEPT LAMP UNIT. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning - Sharp PG-F320W | PG-F320W Operation Manual - Page 6
with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits lamp recycling organization www.lamprecycle.org, or Sharp at 1-800-BE-SHARP. U.S.A. ONLY Caution Concerning Lamp Replacement See "Replacing the Lamp" on page 57. This SHARP projector uses a DLP - Sharp PG-F320W | PG-F320W Operation Manual - Page 7
Mode Contrast Bright Red Blue CLR Temp BrilliantColorTM C.M.S. Setting C.M.S. Lamp Setting Reset PRJ Net. Help Standard 0 0 0 0 0 1 On projector. Note .........Indicates additional information for setting up and operating the projector. For Future Reference Maintenance P. 52 Troubleshooting - Sharp PG-F320W | PG-F320W Operation Manual - Page 8
16 Setup Setting up the Projector 18 Setting up the Projector 18 Standard Setup (Front Projection) ....... 18 Ceiling-mount Setup 18 Projection (PRJ) Mode 19 Screen Size and Projection Distance .. 20 Connections Connecting the Projector to Other Equipment 21 Controlling the Projector by - Sharp PG-F320W | PG-F320W Operation Manual - Page 9
the Lamp 57 Lamp 57 Caution Concerning the Lamp 57 Replacing the Lamp 57 Removing and Installing the Lamp Unit 58 Resetting the Lamp Timer 59 Storing the Projector 60 How to Use the Storage Case 60 Computer Compatibility Chart 61 Troubleshooting 62 For SHARP Assistance 64 Specifications - Sharp PG-F320W | PG-F320W Operation Manual - Page 10
servicing. 1. Read Instructions All the safety and operating instructions should be read before the product is operated. 2. Retain Instructions The safety and operating instructions Two-wire type (mains) plug. b. Three-wire grounding type (mains) plug with a grounding terminal. This plug will only - Sharp PG-F320W | PG-F320W Operation Manual - Page 11
way. f. When the product exhibits a distinct change in performance, this indicates a need for service. 19. Replacement Parts When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original - Sharp PG-F320W | PG-F320W Operation Manual - Page 12
of glass par- ticles if lamp ruptures. In case of lamp rupture, contact your nearest Sharp Authorized Projector Dealer or Service Center for replacement. See "Replacing the Lamp" on page 57. Caution concerning the setup of the projector ■ For minimal servicing and to maintain high image quality - Sharp PG-F320W | PG-F320W Operation Manual - Page 13
manuals of the projector and the equipment to be connected for instructions on how to make the connections. Temperature monitor function ■ If the projector starts to overheat due to setup problems is automatically controlled. The sound of the fan may change during projector operation due to - Sharp PG-F320W | PG-F320W Operation Manual - Page 14
to the "SETUP MANUAL" contained on the supplied CD-ROM for details. Connecting Pin Assignments 2 RS-232C Specifications and Commands 4 Setting up the Projector Network Environment 9 Controlling the Projector via LAN 15 Setting up the Projector Using RS-232C or Telnet 20 Resetting the Lamp Timer - Sharp PG-F320W | PG-F320W Operation Manual - Page 15
in "< >" are Replacement parts codes. Optional accessories ■ 3 RCA to mini D-sub 15 pin cable (10n (3.0 m)) ■ Remote receiver ■ Lamp unit ■ Ceiling-mount adaptor ■ Ceiling-mount unit AN-C3CP2 AN on the region. Please check with your nearest Sharp Authorized Projector Dealer or Service Center. 11 - Sharp PG-F320W | PG-F320W Operation Manual - Page 16
Part Names and Functions Numbers in Z refer to the main pages in this operation manual where the topic is explained. Projector Top View Power 26 indicator 55 STANDBY/ON button 26 For turning the power on and putting the projector into standby mode. ENTER button For setting 39 items - Sharp PG-F320W | PG-F320W Operation Manual - Page 17
manual where the topic is explained. Rear View Terminals MONITOR OUT terminal (Output terminal for computer RGB, 23 component and DVI analog signals. Shared for COMPUTER/COMPONENT and DVI-I) Terminal for connecting a monitor. DVI-I input terminal 21 Terminal for DVI digital, computer - Sharp PG-F320W | PG-F320W Operation Manual - Page 18
projector into the standby mode. COMPUTER, DVI, 30 S-VIDEO, VIDEO buttons For switching to the respective input modes. BREAK TIMER button 33 For displaying the break time. MAGNIFY buttons 34 For enlarging/reducing part the optional remote receiver). fan and extending the lamp life. 14 26 - Sharp PG-F320W | PG-F320W Operation Manual - Page 19
the remote control • Ensure that you do not drop it or expose it to moisture or high temperature. 23n (7 m) 30° • The remote control may malfunction under a fluorescent lamp. In this case, move the projector away from the fluorescent lamp. Remote control signal transmitters Remote control 15 - Sharp PG-F320W | PG-F320W Operation Manual - Page 20
_P. 18 2. Connect the projector to the computer and plug the power cord into the AC socket of the projector When connecting equipment other than a computer, see pages 22 and 23. _PP. 21, 24, 25 3. Remove the lens cap and turn the projector on On the projector On the remote control _P. 26 16 - Sharp PG-F320W | PG-F320W Operation Manual - Page 21
) and picture size, press ENTER to finish the Setup Guide. _PP. 27, 28 5. Correct trapezoidal distortion Correcting trapezoidal distortion using Keystone Correction. On the projector Shrinks upper side. Shrinks lower side. On the remote control _P. 29 6. Select the INPUT mode Select the - Sharp PG-F320W | PG-F320W Operation Manual - Page 22
"Screen Size and Projection Distance". Ceiling-mount Setup ■ It is recommended that you use the optional Sharp ceiling-mount adaptor and unit for this installation. Before mounting the projector, contact your nearest Sharp Authorized Projector Dealer or Service Center to obtain the recommended - Sharp PG-F320W | PG-F320W Operation Manual - Page 23
" menu. See page 45.) ■ Table mounted, front projection [Menu item ➞ "Front"] ■ Ceiling mounted, front projection [Menu item ➞ "Ceiling + Front"] Setup ■ Table mounted, rear projection (with a translucent screen) [Menu item ➞ "Rear"] ■ Ceiling mounted, rear projection (with a translucent screen - Sharp PG-F320W | PG-F320W Operation Manual - Page 24
Setting up the Projector (Continued) Screen Size and Projection Distance 16:10 Signal Input (Normal Mode) Picture (Screen) size Diag. [χ] Width Height Projection distance [L] Distance from the lens center - Sharp PG-F320W | PG-F320W Operation Manual - Page 25
terminal RGB cable (supplied) Terminal on the projector COMPUTER/ COMPONENT RGB output terminal mini D-sub 15 pin to DVI cable (commercially available) DVI-I DVI digital output terminal DVI Digital SHARP notebook computer). Refer to the specific instructions in your computer's operation manual - Sharp PG-F320W | PG-F320W Operation Manual - Page 26
signal can be input to the projector. (Connect the AUDIO input terminal for audio input.) • Depending on specifications of video equipment or HDMI to DVI digital cable, the signal transmission may not work property. (The HDMI specification does not support all connections to video equipment that - Sharp PG-F320W | PG-F320W Operation Manual - Page 27
cable audio output (commercially available or available terminal as Sharp service part QCNWGA038WJPZ) Terminal on the projector AUDIO 1 Monitor Amplifier RCA audio output terminal RCA audio cable (commercially available) AUDIO 2 Audio output terminal Cables for a camera or a video game RGB - Sharp PG-F320W | PG-F320W Operation Manual - Page 28
and check the status of the projector. Refer to the "SETUP MANUAL" contained on the supplied CD-ROM for "RS-232C Specifications and Commands". When connecting to a computer using an RS-232C serial control cable and a DIND-sub RS-232C adaptor To RS-232C terminal DIN-D-sub RS-232C adaptor (supplied - Sharp PG-F320W | PG-F320W Operation Manual - Page 29
safety, do not connect the LAN terminal with any cables that may cause excessive voltage such as a telephone line. To LAN terminal Hub or Computer Connections LAN cable (Category AC socket on the rear of the projector. Then plug into AC outlet. AC socket Power cord (supplied) To AC outlet 25 - Sharp PG-F320W | PG-F320W Operation Manual - Page 30
on the projector or ON on the remote control. • The power indicator illuminates green. • After the lamp indicator illuminates lamp. Green: The lamp is on. Blinking in green: The lamp is warming up. Red: The lamp is shut down abnormally or the lamp should be replaced. • When switching on the projector - Sharp PG-F320W | PG-F320W Operation Manual - Page 31
Image Projection Setup Guide screen About the Setup Guide After turning on the projector, the Setup Guide screen appears to assist you with projector setup. Guidance items 1 FOCUS 2 HEIGHT ADJUST 3 ZOOM Press ENTER to exit the Setup Guide screen. Note • The Setup Guide screen automatically high- - Sharp PG-F320W | PG-F320W Operation Manual - Page 32
can be adjusted using the adjustment feet at the front and rear of the projector. When the screen is above the projector, the projection image can be made higher by adjusting the projector. 1 Lift the projector to adjust its height while lifting the HEIGHT ADJUST lever. HEIGHT ADJUST lever - Sharp PG-F320W | PG-F320W Operation Manual - Page 33
Keystone Correction mode will disappear. • You can also use KEYSTONE on the projector. Info • While adjusting the image using Keystone Correction, straight lines and the Note • Automatic Keystone Correction may not work well in some cases, such as when the screen is leaning, temperature is extremely - Sharp PG-F320W | PG-F320W Operation Manual - Page 34
Input Mode Select the appropriate input mode for the connected equipment. Press COMPUTER, DVI, S-VIDEO or VIDEO on the remote control to select the input mode. • When you press INPUT on the projector or DVI on the remote control, the INPUT list appears. Press P/R to switch the INPUT mode. COMPUTER - Sharp PG-F320W | PG-F320W Operation Manual - Page 35
cannot be projected : Area where the signals are off screen *1 The Image Shift function can be used for these images. *2 Same as NORMAL mode. *3 In case SXGA+ input. FULL 1280 × 800 - DOT BY DOT 800 × 600 1024 × 768 1152 × 864 1400 × 1050 1280 × 1024 - 1360 × 768 1366 × 768 - Output screen image - Sharp PG-F320W | PG-F320W Operation Manual - Page 36
protected by law for copyright holders. Please use caution. • While watching non-widescreen images (4:3), if you use the RESIZE function to fill the screen, parts of the outer edge of the image will be cut off or distorted. To watch original images as the producers intended, set RESIZE to "NORMAL - Sharp PG-F320W | PG-F320W Operation Manual - Page 37
and Setting the Break Timer 1 Press SPOT and press P/R/O/Q on the remote control to move the spot area. 2 Press SPOT again. • The spot lamp life will extend. Note • Refer to "Lamp Setting" on page 43 for de- tails of the Eco+Quiet mode. Note • Break Timer does not function while the projector - Sharp PG-F320W | PG-F320W Operation Manual - Page 38
Remote Control (Continued) Auto Sync (Auto Sync Adjustment) Displaying an Enlarged Portion of an Image Auto Sync function works when detecting input signal after the projector turns on. Press AUTO SYNC to manually the input signal. • In the following cases, the image will return to the normal - Sharp PG-F320W | PG-F320W Operation Manual - Page 39
projector with the remote control. For details, see the operation manual of the receiver. Connecting with a USB cable Computer To USB terminal Remote receiver To USB terminal (optional, AN-MR2) or USB cable (commercially available or available as Sharp service part that do not support USB. • - Sharp PG-F320W | PG-F320W Operation Manual - Page 40
Menu Items The following shows the items that can be set in the projector. "Picture" menu PAGE 1 Picture Picture Mode Contrast Bright Color Tint Sharp Red Blue SCR PRJ Net. Help Standard 0 0 0 0 0 0 0 SEL./ADJ. ENTER END Main menu Picture Page 41 Picture Mode Page 41 Sub menu Standard - Sharp PG-F320W | PG-F320W Operation Manual - Page 41
"Screen adjustment (SCR-ADJ)" menu Pict. SCR-ADJ Resize Image Shift Keystone Auto Keystone OSD Display Background Setup Guide PRJ Mode Language PRJ Net. Stretch 0 0 On On Logo On Front English Help Main menu SCR - ADJ Page 44 SEL./ADJ. ENTER END Resize Page 44 Image Shift -40 +40 Page 44 - Sharp PG-F320W | PG-F320W Operation Manual - Page 42
: X X : X X : X X : X X : X X Projector XX-XXXX SEL./ADJ. ENTER END Main menu Network Page 49 Password [Enable/Disable] Page 49 DHCP Client [On/Off] DVI input Signal type: Auto/RGB/Component S-VIDEO or VIDEO input Video System: Auto/PAL/SECAM/ NTSC3.58/NTSC4.43/ PAL-M/PAL-N/PAL-60 DVI (Digital - Sharp PG-F320W | PG-F320W Operation Manual - Page 43
Bright". • This operation can also be performed by using the buttons on the projector. 1 Press MENU/HELP. • The "Picture" menu screen for the selected Contrast Bright Red Blue CLR Temp BrilliantColorTM C.M.S. Setting C.M.S. Lamp Setting Reset PRJ Net. Help Standard 0 0 0 0 0 1 On Bright SEL./ - Sharp PG-F320W | PG-F320W Operation Manual - Page 44
Picture Mode Contrast Bright Red Blue CLR Temp BrilliantColorTM C.M.S. Setting C.M.S. Lamp Setting Reset SEL./ADJ. PRJ Net. Help Standard 0 15 0 0 0 1 On Bright Single ADJ END Note • Menu buttons do not function while the projector is operating the "Auto Sync", "Break Timer", "FREEZE", or - Sharp PG-F320W | PG-F320W Operation Manual - Page 45
Sharp Red Blue PRJ Net. Help Standard 0 0 0 0 0 0 0 Q PAGE2 Menu operation n Page 39 Picture SCR Picture Mode PRJ Net. Help Standard 3 CLR Temp 2 BrilliantColorTM C.M.S. Setting 4 C.M.S. 5 Progressive 6 Lamp Setting Reset PICTURE MODE on the remote control to select the - Sharp PG-F320W | PG-F320W Operation Manual - Page 46
For more color intensity. For making skin tones greenish. For more sharpness. For stronger red. For stronger blue. For making the effect stronger • To reset all adjustment items, select "Reset" and press ENTER. 3 Adjusting the Color Temperature This function adjusts each of the six main colors that - Sharp PG-F320W | PG-F320W Operation Manual - Page 47
The film source is a digital video recording with the original encoded as is at 24 frames/second. The projector can convert this film source to Progressive, 3D Progressive and Film Mode cannot be selected. 6 Lamp Setting Selectable items Eco + Quiet Bright Brightness and Power consumption Approx - Sharp PG-F320W | PG-F320W Operation Manual - Page 48
Image Shift 3 Keystone Auto Keystone 4 OSD Display 5 Background 6 Setup Guide 7 PRJ Mode 8 Language PRJ Net. Stretch 0 0 On On the "SCR - ADJ" menu to "On". For Manual Keystone Correction Set "Auto Keystone" on the "SCR - remote control or on the projector to adjust Keystone Correction. 44 - Sharp PG-F320W | PG-F320W Operation Manual - Page 49
not displayed. Selectable items Front Ceiling + Front Rear Ceiling + Rear Description Normal image (Projected Sharp logo screen Blue screen - 6 Selecting the Setup Guide Selectable items On Off Description Displaying the Setup Guide when turning the projector on. Not displaying the Setup Guide - Sharp PG-F320W | PG-F320W Operation Manual - Page 50
by pressing AUTO SYNC on the remote control. • The Auto Sync adjustment may take some time to complete, depending on the image of the computer connected to the projector. • When the optimum image cannot be achieved with Auto Sync adjustment, use manual adjustments. (See page 51.) 2 Auto Power - Sharp PG-F320W | PG-F320W Operation Manual - Page 51
users have access. Info • If you lose or forget your keycode, contact your nearest Sharp Authorized Projector Dealer or Service Center (see page 64). Even if the product warranty is valid, the keycode reset recognizes each button on the remote control or on the projector as an individual button, even - Sharp PG-F320W | PG-F320W Operation Manual - Page 52
function does not affect the operation with the remote control buttons. • You cannot use the keylock function while the projector is warming up. A Checking the Lamp Life Status You can confirm the cumulative lamp usage time and the remaining lamp life (percentage). a Taking the Keylock off Hold - Sharp PG-F320W | PG-F320W Operation Manual - Page 53
to delete it, then set a new password. On the projector, press S→T→S→T→S→T→U. Note • If ENTER is held down for more than 5 sec- onds, the operation buttons on the projector will be locked. (See page 48.) • You cannot use the buttons on the remote control to delete the password. 49 Useful Features - Sharp PG-F320W | PG-F320W Operation Manual - Page 54
MAC address of the projector is displayed. The projector name is displayed. 4 Enter "Subnet Mask" using P, R, Q and O, then press ENTER. 5 Enter "Gateway" using P, R, Q and O, then press ENTER. Note • For information on how to change the projector name, see "SETUP MANUAL" contained in the supplied - Sharp PG-F320W | PG-F320W Operation Manual - Page 55
or poor Picture is dark The image is distorted Help Reset all adjustments to default settings SEL. ENTER END Press ENTER on the input signal or setting that you have selected. • If the problem is not solved, refer to "Troubleshooting" (see pages 62 and 63). • When selecting "sRGB" in "Picture - Sharp PG-F320W | PG-F320W Operation Manual - Page 56
Mild detergent diluted with water Wax Thinner 52 Info • If you want to clean the air vents during projector operation, ensure you press STANDBY/ON on the projector or STANDBY on the remote control and put the projector into standby mode. After the cooling fan has stopped, clean the vents. - Sharp PG-F320W | PG-F320W Operation Manual - Page 57
Cleaning and Replacing the Dust Filters Cleaning the Dust Filters Info • The dust filters should be cleaned every 100 hours of use. Clean the filters more often when the projector is used in a dusty or smoky location. 1 Press STANDBY/ON on the projector to put the projector into standby mode. • - Sharp PG-F320W | PG-F320W Operation Manual - Page 58
will not turn on unless it is correctly installed. Replacing the Dust Filters Info • If the filters become too dirty to clean effectively, purchase new ones (PFILDA025WJZZ) from your nearest Sharp Authorized Projector Dealer or Service Center. Reinforcement seal After removing the filter holders - Sharp PG-F320W | PG-F320W Operation Manual - Page 59
will illuminate in red. ■ If you try to turn on the projector a fourth time without replacing the lamp, the projector will not turn on. Indicators on the Projector Power indicator Red on Green on Red blinks Green blinks Lamp indicator Green on Green blinks Red on Temperature warning Off - Sharp PG-F320W | PG-F320W Operation Manual - Page 60
AC outlet, and then connect it again. • Carefully replace the lamp. (See page 57.) • Take the projector to your nearest Sharp Authorized Projector Dealer or Service Center (see page 64) for repair. • Please exercise care when replacing the lamp. • Securely install the cover. • If the power indicator - Sharp PG-F320W | PG-F320W Operation Manual - Page 61
the instructions described in this section. * If you wish, you may have the lamp replaced at your nearest Sharp Authorized Projector Dealer or Service Center. * If the new lamp does not light after replacement, take your projector to the nearest Sharp Authorized Projector Dealer or Service Center - Sharp PG-F320W | PG-F320W Operation Manual - Page 62
remote control to put the projector into standby mode. • Wait until the cooling fan stops. 2 Disconnect the power cord. • Unplug the power cord from the AC socket. • Leave the lamp until it has fully cooled down (about 1 hour). 3 Remove the lamp unit cover. • Turn the projector over. Loosen the user - Sharp PG-F320W | PG-F320W Operation Manual - Page 63
tighten the user service screw (3) to secure the lamp unit cover. Info • If the lamp unit and lamp unit cover are not correctly installed, the power will not turn on, even if the power cord is connected to the projector. Resetting the Lamp Timer Reset the lamp timer after replacing the lamp. Info - Sharp PG-F320W | PG-F320W Operation Manual - Page 64
, and place it in the supplied storage case. 1 Open the cover of the storage case. 2 Place the projector into the storage case. Info • Ensure the projector has cooled down sufficiently before placing it in the case. • When you place the projector into the storage case, make sure that the cooling fan - Sharp PG-F320W | PG-F320W Operation Manual - Page 65
60 60 75 60 60 60 70 75 ✔ 60 ✔ 75 ✔ 60 60 ✔ 67 75 75 75 DVI-D Support ✔ ✔ Display Upscale True Intelligent Compression Upscale Intelligent Compression Note • When this projector receives 640K350 VESA format VGA signals, "640 × 400" appears on the screen. DTV Signal 480I 480P - Sharp PG-F320W | PG-F320W Operation Manual - Page 66
are incorrectly connected to the projector. • Remote control battery has run out. • External output has not been set when connecting notebook computer. • The lamp unit cover is not installed correctly. • If the connected DVI digital equipment is turned on before the "DVI-D" input mode is selected on - Sharp PG-F320W | PG-F320W Operation Manual - Page 67
Problem on the projector. Picture is green on COMPUTER (Component)/ DVI (Component). lamp life draws to a close, replace the lamp. Picture is dark. The remote control cannot be used. • Operate the remote control while pointing it at the projector's remote control sensor. • The remote control - Sharp PG-F320W | PG-F320W Operation Manual - Page 68
If you encounter any problems during setup or operation of this projector, first refer to the "Troubleshooting" section on pages 62 and 63. If this operation manual does not answer your question, please contact the SHARP Service departments listed below. U.S.A. Sharp Electronics Corporation 1-888 - Sharp PG-F320W | PG-F320W Operation Manual - Page 69
Control and communication terminals LAN (RJ-45) USB (Type B) RS-232C (mini DIN 9 pin) Speakers Projection lamp Rated voltage Rated frequency Input current Power consumption (Standby) Operation temperature Cabinet Dimensions (main body only) [W × H × D] Weight (approx.) PG-F320W 0.65" DLP - Sharp PG-F320W | PG-F320W Operation Manual - Page 70
Dimensions Units: inches (mm) 13 64/ (5) 11 1/32 (280) 23 64/ (9) 2 7/8 (73) 1 55 64/ (47) 7/16 (11) 4 19 64/ (109) ø9 7/64 (69.2) 3 5/32 (80) 12 /13 32 (315) 3 1/16 (77.5) 66 1 /11 32 (33.8) 2 /61 64 (75) 1 /53 64 (46.2) 2 /19 32 (65.5) 7/16 (11) 1 7/8 (47.5) 4 7/64 (104) - Sharp PG-F320W | PG-F320W Operation Manual - Page 71
DOT 31 Dust filter 53 DVI button 30 DVI-I input terminal 21, 22 ECO+QUIET Remote control 14 Remote control sensor 15 Replacing the lamp 57, 58 Resize 31, 44 RESIZE button 31 RGB cable 21 RS-232C terminal 24 SCR - ADJ 44 Screen Size and Projection Distance 20 Setup Guide 27, 45 Sharp - Sharp PG-F320W | PG-F320W Operation Manual - Page 72
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
 |
 |
DATA PROJECTOR
MODEL
PG-F320W
Introduction
Quick Start
Setup
Connections
Basic
Operation
Useful
Features
Appendix
OPERATION MANUAL