Sharp PG-M20S Operation Manual

Sharp PG-M20S - Notevision SVGA DLP Projector Manual

Get Sharp PG-M20S - Notevision SVGA DLP Projector PDF manuals and user guides
UPC - 074000358560
View all Sharp PG-M20S manuals
Add to My Manuals
Save this manual to your list of manuals

Sharp PG-M20S manual content summary:

  • Sharp PG-M20S | Operation Manual - Page 1
    OPERATION MANUAL MODEL PG-M20S DIGITAL MULTIMEDIA PROJECTOR Introduction Setup and Connections Basic Operation Easy to Use Functions Appendix
  • Sharp PG-M20S | Operation Manual - Page 2
    Number located on the bottom of the projector and retain this information. Before recycling the packaging, please be sure that you have checked the contents of the carton thoroughly against the list of "Supplied accessories" on page 14. Model No.: PG-M20S Serial No.: This equipment complies with
  • Sharp PG-M20S | Operation Manual - Page 3
    USERS IN THE U.K. The mains lead of this product is fitted with a non-rewireable (moulded) plug incorporating a 10A fuse. Should the fuse need to be replaced instructions red. Ensure that neither the brown nor the blue wire is connected to the earth terminal in your three-pin plug. Before replacing
  • Sharp PG-M20S | Operation Manual - Page 4
    , Dutch, Portuguese, Chinese (Traditional Chinese and Simplified Chinese), Korean and Arabic. Carefully read through the operation instructions before operating the projector. Die mitgelieferte CD-ROM enthält Bedienungsanleitungen in Englisch, Deutsch, Französisch, Schwedisch, Spanisch, Italienisch
  • Sharp PG-M20S | Operation Manual - Page 5
    SHOCK. DO NOT REMOVE SCREWS EXCEPT SPECIFIED USER SERVICE SCREWS. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER. NO USER-SERVICEABLE PARTS EXCEPT LAMP UNIT. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle
  • Sharp PG-M20S | Operation Manual - Page 6
    REPLACING THE LAMP. REPLACE WITH SAME SHARP LAMP UNIT TYPE BQC-PGM20X//1 ONLY. UV RADIATION : CAN CAUSE EYE DAMAGE. TURN OFF LAMP BEFORE SERVICING. MEDIUM PRESSURE LAMP : RISK OF EXPLOSION. POTENTIAL HAZARD OF GLASS PARTICLES IF LAMP HAS RUPTURED. HANDLE WITH CARE. SEE OPERATION MANUAL. PRECAUTIONS
  • Sharp PG-M20S | Operation Manual - Page 7
    generation DLP™ projectors. • Newly developed 12° DMD™ chip provides significantly improved opti- cal efficiency and excellent contrast ratio. 2. Light, color gradation by minimizing hue change. • Color Management Function Supports sRGB (color management). • Noise Reduction Allows for a clear
  • Sharp PG-M20S | Operation Manual - Page 8
    Manuals ..... 9 Part Names 10 Projector (Front and Top View 10 Projector 48 Enlarging a Specific Portion of an Image Function 53 Video Digital Noise Reduction Lamp Usage Time 58 Displaying the Break Timer 59 Reversing/Inverting Projected Images 60 Locking the Operation Buttons on the Projector
  • Sharp PG-M20S | Operation Manual - Page 9
    70 Regarding the Lamp 71 Lamp 71 Caution Concerning the Lamp 71 Replacing the Lamp 71 Removing and Installing the Lamp Unit 72 Resetting the Lamp Timer 73 Connecting Pin Assignments 74 Computer Compatibility Chart 75 Troubleshooting 76 For SHARP Assistance 78 Specifications 79 Dimensions
  • Sharp PG-M20S | Operation Manual - Page 10
    the following basic rules for its installation, use and servicing. 1. Read Instructions All the safety and operating instructions should be read before the product is operated. 2. Retain Instructions The safety and operating instructions should be retained for future reference. 3. Heed Warnings All
  • Sharp PG-M20S | Operation Manual - Page 11
    instructions. Adjust only those controls that are covered by the operating instructions service. 19. Replacement Parts When replacement parts are required, be sure the service technician has used replacement SHARP 2), which Lineo supports.You may obtain DLP™ (Digital Light Processing) and DMD™ (Digital
  • Sharp PG-M20S | Operation Manual - Page 12
    unit I Potential hazard of glass particles if lamp ruptures. In case of lamp rupture, contact your nearest Sharp Authorized Projector Dealer or Service Center for a replacement. See "Replacing the Lamp" on page 71. CAUTION PRECAUCI N PR CAUTION BQC-PGM20X//1 Cautions concerning the setup of the
  • Sharp PG-M20S | Operation Manual - Page 13
    " folder. 6 Double click on the desired installation program and follow the instructions on the screen. For Macintosh: 1 Insert the CD-ROM in the CD on the "CD-ROM" drive. 4 Double click on the "manuals" folder. 5 Double click on the "pgm20s" folder. 6 Double click on the language (name of the
  • Sharp PG-M20S | Operation Manual - Page 14
    . Replace the lamp when the indicator illuminates red. POWER indicator 28 Illuminates in red, when the projector is in standby. When the power is turned on, this indicator will illuminate green. POWER button 28 Turns the power on or off. LENS button 32 For adjusting Keystone or Digital
  • Sharp PG-M20S | Operation Manual - Page 15
    Introduction Projector (Side View) INPUT 1 terminal 21 Port for DVI digital, computer RGB, and COMPONENT signals. INPUT . Refer to the information that came with the system for instructions on how to use it to secure the projector. Attaching the lens cap After putting the lens cap strap on
  • Sharp PG-M20S | Operation Manual - Page 16
    the input mode to INPUT 1. AUTO SYNC button 44 For automatically adjusting images when connected to a computer. LENS button 32 For adjusting Keystone or Digital Shift setting. ENTER button 36 For setting items selected or adjusted on the menu. 28 POWER button Turns the power on or off
  • Sharp PG-M20S | Operation Manual - Page 17
    malfunction under a fluorescent lamp. Under that circumstance, move the projector away from the fluorescent lamp. Signal transmitter 30° 30 The batteries included with this projector may be exhausted over a short period, depending on how they are kept. Be sure to replace them as soon as possible
  • Sharp PG-M20S | Operation Manual - Page 18
    to check you computer's specifications. If you are still having difficulty connecting, a conversion connector (commercially available) may be necessary. Note • All cables may not be available in all regions. Please check with your nearest Sharp Authorized Projector Dealer or Service Center. -14
  • Sharp PG-M20S | Operation Manual - Page 19
    Setup and Connections Setup and Connections
  • Sharp PG-M20S | Operation Manual - Page 20
    position. Info • Do not press the foot releases when the feet are extended without firmly holding the projector. • Do not hold the lens when lifting or lowering the projector. • When lowering the projector, be careful not to get your fingers caught in the area between the adjustment feet and the
  • Sharp PG-M20S | Operation Manual - Page 21
    colors, making viewing difficult. Close the curtains and dim the lights when setting up the screen in a sunny or bright room. • A polarizing screen cannot be used with this projector. Standard Setup (Front Projection) I Place the projector at the required distance from the screen according to the
  • Sharp PG-M20S | Operation Manual - Page 22
    Setup (cont.) Screen Size and Projection Distance Screen Base line: Horizontal line passing through the lens center. Lens center 90° H L:Projection distance NORMAL Mode (4:3) Picture (Screen) size Diag. (X) Width Height Projection distance (L) Maximum (L1) Minimum (L2) Distance from the
  • Sharp PG-M20S | Operation Manual - Page 23
    the mirror so the light does not shine into the eyes of the audience. Ceiling-mount setup I It is recommended that you use the optional Sharp ceiling-mount bracket for this installation. Before mounting the projector, contact your nearest Sharp Authorized Projector Dealer or Service Center to obtain
  • Sharp PG-M20S | Operation Manual - Page 24
    made. • Be sure to read the operation manuals of the devices to be connected before making connections. This projector can be connected to: A computer using: I See page 24.) *DTV is the umbrella term used to describe the new digital television system in the United States. A monitor using: I An RGB
  • Sharp PG-M20S | Operation Manual - Page 25
    "Picture" menu. See page 40. • A Macintosh adaptor may be required for use with some Macintosh computers. Contact your nearest Sharp Authorized Projector Dealer or Service Center. Supplied accessory DVI to 15-pin D-sub cable To RGB Output port To Audio Output port Notebook computer 2 ø3.5 mm
  • Sharp PG-M20S | Operation Manual - Page 26
    in which computer digital image signals can be directly input. 1 Connect the projector to the computer using the DVI cable. 2 To input audio signal, connect the projector to the computer using a ø3.5 mm stereo audio cable (commercially available or available as Sharp service part QCNW-4870CEZZ
  • Sharp PG-M20S | Operation Manual - Page 27
    the umbrella term used to describe the new digital television system in the United States. 1 (3.0 m)) DVI to 15-pin D-sub adaptor Model: AN-A1DV (7.9" (20 cm)) To analog component separately) (sold separately) Note • When connecting the projector to the video equipment in this way, select "
  • Sharp PG-M20S | Operation Manual - Page 28
    realize a higher-quality image. For realizing a higher-quality image, use a commercially available S-VIDEO cable to connect the S-VIDEO terminal on the projector and the S-VIDEO output terminal on the video equipment. • A ø3.5 mm minijack to RCA audio cable (commercially available) is required for
  • Sharp PG-M20S | Operation Manual - Page 29
    Component signals entered into the DVI port can be output. Signals from equipment connected to the DVI digital port cannot be output. Using INPUT 1 Terminal with the Terminal Cover Attached to the Projector The INPUT 1 terminal can be used with the terminal cover folded as shown in the illustration
  • Sharp PG-M20S | Operation Manual - Page 30
    such as Power PointTM. Using the Wireless Presentation Function 1 Connect the projector to the computer using the supplied USB cable. Note • This function does not work with the following operating systems that do not support USB. • Versions earlier than Windows 95. • Versions earlier than
  • Sharp PG-M20S | Operation Manual - Page 31
    Basic Operation Basic Operation
  • Sharp PG-M20S | Operation Manual - Page 32
    illuminates green. After the LAMP REPLACEMENT indicator illuminates, the projector is ready to start operation. Note • The LAMP REPLACEMENT indicator illuminates, indicating the status of the lamp. Green: The lamp is ready. Green blinking: The lamp is warming up. Red: The lamp should be replaced
  • Sharp PG-M20S | Operation Manual - Page 33
    volume can be adjusted by pressing or . • , on the projector operate as cursor buttons ( , ) when selecting setup or adjustment functions while adjusting menus or the lens. "On-screen Display (Example) INPUT 1 Mode Using DVI digital Using Analog RGB Using Component INPUT 2 Mode Using S-Video
  • Sharp PG-M20S | Operation Manual - Page 34
    again will turn the pic- ture and the sound back on. 6 Press , then press again while the confirmation message is displayed, to turn off the projector. Note • If you accidentally pressed and do not want to turn off the power, wait until the confirmation message disappears. Info • Do not unplug the
  • Sharp PG-M20S | Operation Manual - Page 35
    on-screen display. Adjusting the Lens The image is focused and adjusted to the desired size using the focus ring or zoom knob on the projector. 1 The focus is adjusted by rotat- ing the focus ring. Zoom knob Focus ring Basic Operation 2 Zooming is adjusted by mov- ing the zoom knob
  • Sharp PG-M20S | Operation Manual - Page 36
    an angle of approximately ±35 degrees. 1 Press . • Pressing again while the BOR- DER, STRETCH or SMART STRETCH screen is displayed will start the Digital Shift function. See page 33. 2 Press or to ad- just the Keystone correction. • If you want to make more detailed cor- rections, press
  • Sharp PG-M20S | Operation Manual - Page 37
    the screen up or down when projecting 16:9 images from DVD players and DTV* decoders. * DTV is the umbrella term used to describe the new digital television system in the United States. Press to move the projected image upwards. Press to reset the image. UNDO button Press to move the projected
  • Sharp PG-M20S | Operation Manual - Page 38
    the projector. I INPUT 1 Mode Main menu Picture Page 40 Sub menu Contrast -30 +30 Bright -30 +30 Color -30 +30 Tint -30 +30 Sharp -30 +30 Red - Level A Level B Save Image Delete Sharp Custom Blue None Sharp Custom None Disable Yes (Y Cable) Lamp Timer Break Timer PRJ Mode Keylock
  • Sharp PG-M20S | Operation Manual - Page 39
    -30 +30 Bright -30 +30 Color -30 +30 Tint -30 +30 Sharp -30 +30 Red -30 +30 Blue -30 +30 CLR Temp -3 +3 Reset Progressive Mode 2D .43 NTSC3.58 PAL-M PAL-N Sharp Custom Blue None Sharp Custom None Main menu Options (2) Page 58 Sub menu Lamp Timer Break Timer PRJ Mode Language
  • Sharp PG-M20S | Operation Manual - Page 40
    has two sets of menu screens that allow you to adjust the image and various projector settings. You can operate the menus from the projector or remote control using the following proce- dure. On-screen menu for INPUT 2 On-screen menu for INPUT 1 RGB mode or INPUT 3 Mode Menu Bar (
  • Sharp PG-M20S | Operation Manual - Page 41
    Basic Operation 2 Press or to select the menu you want to adjust. Note • For details on the menus, see the tree charts on pages 34 and 35. 3 Press or to select the item you want to adjust. Note • To display a single adjustment item, press after selecting the item. Only the menu bar and the selected
  • Sharp PG-M20S | Operation Manual - Page 42
    Using the Menu Screen (cont.) Basic Operations (Settings) 1 Press . Note • The "Picture" menu screen for the selected input mode is displayed. • The on-screen display shown on the right is displayed when INPUT 1 mode is selected. 2 Press or to select the menu you want to adjust. Note • For details
  • Sharp PG-M20S | Operation Manual - Page 43
    4 Press . • The cursor shifts to the sub menu. 5 Press or to select the setting of the item displayed in the sub menu. 6 Press . • The item selected is set. Note • Some adjustment items will display a confirmation message. When setting an item, press or to select "Yes" or "OK" and then press . 7
  • Sharp PG-M20S | Operation Manual - Page 44
    Adjusting the Picture You can adjust the projector's picture to your preferences with the following picture settings. Selected Item Description button button Contrast Bright Color Tint Sharp Red Blue CLR Temp For adjusting the contrast level For less contrast For more contrast For
  • Sharp PG-M20S | Operation Manual - Page 45
    ) or two-two pull down (PAL50Hz and SECAM) enhancement to progressive mode images. * The film source is a digital video recording with the original encoded as is at 24 frames/second. The projector can convert this film source to progressive video at 60 frames/second with NTSC and PAL60Hz or at 50
  • Sharp PG-M20S | Operation Manual - Page 46
    For adjustments, see page 36. Note • Computer image adjustments can be made easily by pressing . See page 44 for details. Saving Adjustment Settings This projector allows you to store up to seven adjustment settings for use with various computers. Select "Save Setting" in the "Fine Sync" menu ➝ For
  • Sharp PG-M20S | Operation Manual - Page 47
    selecting a stored adjustment setting with "Select Setting", you can set the projector in the stored adjustments. Special Mode Settings Ordinarily, the type of input , making the image hard to see.) • When a DVD player or Digital Video is connected, select 480P as the input signal. • See "Checking
  • Sharp PG-M20S | Operation Manual - Page 48
    38. Note When setting to " Normal" or " High Speed": • Auto Sync adjustment will occur when the projector is turned on or when the inputs are switched, when connected to a computer. Manual adjustments should be performed: • When the optimum image cannot be achieved with Auto Sync adjustment. See
  • Sharp PG-M20S | Operation Manual - Page 49
    Easy to Use Functions Easy to Use Functions
  • Sharp PG-M20S | Operation Manual - Page 50
    Selecting the Picture Display Mode This function allows you to modify or customize the picture display mode to enhance the input image. Depending on the input signal, you can choose "NORMAL", "FULL", "DOT BY DOT", "BORDER", "STRETCH" or "SMART STRETCH" image. Switching the Picture Display Using
  • Sharp PG-M20S | Operation Manual - Page 51
    BORDER 600 × 450* - STRETCH 800 × 450* SMART STRETCH 800 × 450* - • "STRETCH" is fixed when 720P or 1080I signals are entered. * The Digital Shift function can be used with these images. Input Signal NORMAL Projects a full screen image. Output screen image BORDER STRETCH Projects 4:3 image
  • Sharp PG-M20S | Operation Manual - Page 52
    Displaying a Still Image This function allows you to instantly freeze a moving image. This is useful when you want to display a still image from a computer or video, giving you more time to explain the image to the audience. Storing an Image in Still Image Format 1 Press . • The projected image is
  • Sharp PG-M20S | Operation Manual - Page 53
    Portion of an Image This function allows you to enlarge a specific portion of an image. This is useful when you want to display a detailed portion of the image. Displaying an Enlarged Portion of an Image 1 Press . •
  • Sharp PG-M20S | Operation Manual - Page 54
    Gamma Correction Function Gamma is an image quality enhancement function that offers a richer image by brightening the darker portions of the image without altering the brightness of the brighter portions. When you are displaying images with frequent dark scenes, such as a film or concert, or when
  • Sharp PG-M20S | Operation Manual - Page 55
    ➝ For displaying, see page 36. 1 Press • Select to select . to clear the Pict in Pict mode. 2 Press or on the remote control or on the projector to switch the image in the inset picture. 3 Press , , or to set the position of the inset picture. • Press to stop the frame from moving
  • Sharp PG-M20S | Operation Manual - Page 56
    Save Mode or the Automatic Power Shutoff function allows you to reduce the power consumption of the projector. Setting the Power Save Mode Function to control the quantity of projected light. Select "ON" or "OFF" to decrease or increase brightness and power consumption. Description of Power Save
  • Sharp PG-M20S | Operation Manual - Page 57
    is set to "ON"; • The gamma correction cannot be set. • "Red", "Blue" or "CLR Temp" in "Picture" cannot be adjusted. projector or pressing on the projector. • OFF For switching input modes manually in order by pressing on the projector. • To stop searching for the input mode, press on the projector
  • Sharp PG-M20S | Operation Manual - Page 58
    Noise Reduction (DNR) System Digital Noise Reduction (DNR) provides high quality images with minimal dot On-screen displays displayed when the LENS button is pressed and warning displays (Power off/Temp./Lamp, etc.)) Turning Off the On-screen Display Select "OSD Display" in the "Options (1)" menu
  • Sharp PG-M20S | Operation Manual - Page 59
    Setting the Video System The video input system mode is preset to "Auto"; however, a clear picture from the connected audio-visual equipment may not be received, depending on the video signal difference. In that case, switch the video signal. Setting the Video System Select "Video System" in the "
  • Sharp PG-M20S | Operation Manual - Page 60
    Saving Projected Images • This projector allows you to capture projected images (RGB signals) and set them as a startup image, or background image when no signals are being received. • You can capture the images that are input using analog RGB signals and Digital DVI SVGA signals. Capturing the
  • Sharp PG-M20S | Operation Manual - Page 61
    Image This function allows you to select the image displayed when no signal is being sent to the projector. Selected Item Description Sharp SHARP default image Custom *1 User customized image (i.e. company logo) Blue Blue screen None Black screen *2 *1 You can set a captured image as
  • Sharp PG-M20S | Operation Manual - Page 62
    allows you to check the lamp usage time. Select "Options (2)" menu to see the lamp usage time. Note • It is recommended that the lamp be changed after approximately 1,900 cumulative hours of use. For lamp replacement, contact your nearest Sharp Authorized Projector Dealer or Service Center. 58 -58
  • Sharp PG-M20S | Operation Manual - Page 63
    will be temporarily disabled during the Break Timer. If no signal transmission occurs for more than 15 minutes after the Break Timer has completed, the projector will turn off. • The Break Timer will be displayed on the startup image. To change the screen displayed during the Break Timer, change the
  • Sharp PG-M20S | Operation Manual - Page 64
    Level Normal Level A Level B Description All operation buttons are functional. Only INPUT/VOLUME/AV MUTE buttons on the projector are available. All operation buttons on the projector are unavailable. Setting up the Keylock Select "Keylock Level" in the "Options (2)" menu ➝ For settings, see page
  • Sharp PG-M20S | Operation Manual - Page 65
    Level. Setting up a Password A password can be set by the user to prevent adjustments to certain settings on the "Options (2)" menu. Press or to select the desired number and then press . 2 Enter the 3 remaining digits and press . 3 Enter the password again in "Reconfirm" and press . Note •
  • Sharp PG-M20S | Operation Manual - Page 66
    page 38. 1 Press , and to enter the password in "Old Password" and press . 2 Press , and to set the new password and press . 3 Enter the new 4-digit password again in "Reconfirm" and press . Note • If you do not want to set a password, leave the fields in procedures 2 and 3 blank and press . • To
  • Sharp PG-M20S | Operation Manual - Page 67
    -deterrent function is activated, users will need to enter the correct keycode each time the projector is started. Failure to enter like on the remote control or projector to set the first digit in "New Code". Note • The following buttons on the remote control and projector cannot be set as keycodes:
  • Sharp PG-M20S | Operation Manual - Page 68
    must remember the correct keycode. We suggest you record the keycode in a safe place where only authorized users will have access. If you lose or forget your keycode, you will need to contact your nearest Sharp Authorized Projector Dealer or Service Center (see page 78). You may need to bring your
  • Sharp PG-M20S | Operation Manual - Page 69
    This function allows you to initialize the settings you have made in the projector. Returning to the Default Settings Select "All Reset" in the "Options Fine Sync • Special Modes • Signal Info • Options • Lamp Timer • Anti-Theft • Language • Image stored using "Image Capture" -65 Easy to Use
  • Sharp PG-M20S | Operation Manual - Page 70
    Displaying the Adjustment Settings This function can be used to display all the adjusted settings as a list on the screen. Overview of All Menu Setting Select the "Status" menu and press ➝ For details, see page 36. -66
  • Sharp PG-M20S | Operation Manual - Page 71
    Appendix Appendix
  • Sharp PG-M20S | Operation Manual - Page 72
    of the arrows. 3 Reinsert the inner padding into the carrying case. Info • Be sure to insert the inner padding to protect the lens and the projector. 4 Place the projector and the ac- cessories in the carrying case. Info • Be sure to attach the lens cap to protect the lens. • Be sure the
  • Sharp PG-M20S | Operation Manual - Page 73
    a soft flannel cloth. Cleaning the exhaust and intake vents I Use a vacuum cleaner to clean dust from the exhaust vent and the intake vent. Projector's Rear View Neutral detergent diluted with water I When the dirt is hard to remove, soak a cloth in a neutral detergent diluted with water, wring
  • Sharp PG-M20S | Operation Manual - Page 74
    to your nearest down Sharp Authorized Projector Dealer • Internal circuit failure or Service Center (see page 78) • Clogged air intake for repair. LAMP REPLACE- MENT indicator Green on Green blinks when the lamp is active. Red blinks Time to change the lamp Red on/ The lamp does Power off
  • Sharp PG-M20S | Operation Manual - Page 75
    replacement, take your projector to the nearest Sharp Authorized Projector Dealer or Service Center for repair. Purchase a replacement lamp unit of type BQCPGM20X//1 from your nearest Sharp Authorized Projector Dealer or Service Center. Then carefully change the lamp by following the instructions
  • Sharp PG-M20S | Operation Manual - Page 76
    cooling fan stops. Lamp unit BQC-PGM20X//1 POWER button 2 Disconnect the power cord. • Unplug the power cord from the AC socket. • Leave the lamp until it has fully cooled down (about 1 hour). 3 Remove the lamp unit cover. • Turn over the projector, and loosen the user service screw that secures
  • Sharp PG-M20S | Operation Manual - Page 77
    , , and on the projector, press on the projector. • "LAMP 0000H" is displayed, indicating that the lamp timer is reset. Info • Make sure to reset the lamp timer only when replacing the lamp. Otherwise, this may cause the lamp to become damaged or explode. User service screw AC socket POWER button
  • Sharp PG-M20S | Operation Manual - Page 78
    terminal : 29 pin connector 9 ~ 16 1 2 7 8 17 24 18 23 • DVI Digital RGB Input Pin No. Signal Pin No. Signal 1 T.M.D.S data 2- 16 Hot plug detection connected Not connected Not connected Not connected Analog input Red Analog input Green Analog input Blue Horizontal sync Ground • DVI
  • Sharp PG-M20S | Operation Manual - Page 79
    ) mode. Should this occur, turn off the LCD display on the notebook computer and output the display data in "CRT only" mode. Details on how to change display modes can be found in your notebook computer's operation manual. • When this projector receives 640 × 350 VESA format VGA signals, "640 × 400
  • Sharp PG-M20S | Operation Manual - Page 80
    Troubleshooting Problem No picture and no sound or projector does not start. Check • Projector power cord is not plugged into the wall outlet. • Power to the external connected devices is off. • The selected input mode is wrong. • Cables incorrectly connected to side panel of the projector Digital
  • Sharp PG-M20S | Operation Manual - Page 81
    is set to Level A, only the INPUT, VOLUME and AV MUTE buttons work. • Change the input signal type setting. • The LAMP REPLACEMENT indicator is blinking in red. Replace the lamp. • "Monitor Out" is set to "Disable" when the RGB monitor loop-out adaptor is connected to Monitor Out. • "Monitor Out
  • Sharp PG-M20S | Operation Manual - Page 82
    If you encounter any problems during setup or operation of this projector, first refer to the "Troubleshooting" section on pages 76 and 77. If this operation manual does not answer your question, please contact the SHARP Service departments listed below. U.S.A. Canada Mexico Latin America
  • Sharp PG-M20S | Operation Manual - Page 83
    Specifications Product type Digital Multimedia Projector Model PG-M20S Video system NTSC 3.58/NTSC 4.43/PAL/PAL-M/PAL-N/PAL 60/SECAM/ DTV480I/DTV480P/DTV720P/DTV1080I Display method Single Chip Digital manual, Quick reference guides Replacement parts Lamp unit (Lamp/cage module) (BQC-PGM20X//1),
  • Sharp PG-M20S | Operation Manual - Page 84
    Dimensions Units: inches (mm) Side View Rear View Top View Side View 12 17/32 (318) 11 15/16 (303) Front View 1 3/8 (34.2) 3 1/8 (80) 5/16 (7.5) Bottom View 4 1/8 (104) 8 3/4 (223) 8 5/8 (219) 5 1/16 (128) 1 1/2 3 3 9/32 (38.7) (76) (83) 4 9/16 (115.5) ø54 7 11/16 (195) 3 1/4 (82.5) 2
  • Sharp PG-M20S | Operation Manual - Page 85
    . DVI (Digital Visual Interface) Display digital interface that also supports Analog interfaces. by the IEC, the color changes according to DLP features, so that the images are displayed in mode. Startup Image The image displayed when the projector is turned on. Status function Displays the settings
  • Sharp PG-M20S | Operation Manual - Page 86
    42 CLR Temp (Color Temperature 40 Component input 23 Computer images adjustment 42 Digital Shift 33 DNR 54 DOT BY DOT 47 DVI to 15-pin D- 11 Keylock level 60 Keystone correction (adjustment 32 Lamp 71 LAMP REPLACEMENT indicator 70 Lamp Timer 58 Language selection 30 -82 Lens adjustment
  • Sharp PG-M20S | Operation Manual - Page 87
    SHARP CORPORATION
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
DIGITAL MULTIMEDIA
PROJECTOR
OPERATION MANUAL
MODEL
PG-M20S
Introduction
Setup and Connections
Basic Operation
Easy to Use Functions
Appendix