Sharp PGF267X PG-F267X Operation Manual
Sharp PGF267X - XGA DLP Projector Manual
 |
UPC - 074000365810
View all Sharp PGF267X manuals
Add to My Manuals
Save this manual to your list of manuals |
Sharp PGF267X manual content summary:
- Sharp PGF267X | PG-F267X Operation Manual - Page 1
DATA PROJECTOR MODEL PG-F267X OPERATION MANUAL Introduction Quick Start Setup Connections Basic Operation Useful Features Appendix - Sharp PGF267X | PG-F267X Operation Manual - Page 2
IMPORTANT • For your assistance in reporting the loss or theft of your Projector, please record the Model and Serial Number located on the bottom of the projector and retain this information. • Before recycling the packaging, please ensure that you have checked the contents of the carton thoroughly - Sharp PGF267X | PG-F267X Operation Manual - Page 3
be inserted elsewhere into a 13A socket outlet, as a serious electric shock may occur. To fit an appropriate plug to the mains lead, follow the instructions below: WARNING: THIS APPARATUS MUST BE EARTHED. IMPORTANT: The wires in this mains lead are coloured in accordance with the following code - Sharp PGF267X | PG-F267X Operation Manual - Page 4
lire attentivement ces instructions avant de faire fonctionner le projecteur. El CD-ROM proiettore. De meegeleverde CD-ROM bevat handleidingen in het Engels, Duits, Frans, Spaans, Italiaans, Nederlands, Zweeds, Portugees, Chinees en Arabisch. Lees de handleiding zorgvuldig door voor u de projector - Sharp PGF267X | PG-F267X Operation Manual - Page 5
manual carefully. Introduction ENGLISH There are two important reasons for prompt warranty registration of your new SHARP Projector, using the REGISTRATION CARD packed with the projector. 1. WARRANTY This is to assure that you immediately receive the full benefit of the parts, service - Sharp PGF267X | PG-F267X Operation Manual - Page 6
tested with the operation manual, may cause harmful Electronics Industries Alliance: www.eiae.org, the lamp recycling organization www.lamprecycle.org, or Sharp at 1-800-BE-SHARP. U.S.A. ONLY Caution Concerning Lamp Replacement See "Replacing the Lamp" on page 55. This SHARP projector uses a DLP - Sharp PGF267X | PG-F267X Operation Manual - Page 7
. • In this operation manual, the illustration and the CLR Temp BrilliantColorTM C.M.S. Setting C.M.S. DNR Lamp Setting Reset SEL./ADJ. PRJ Net. projector. Note ....... Indicates additional information for setting up and operating the projector. For Future Reference Maintenance Troubleshooting - Sharp PGF267X | PG-F267X Operation Manual - Page 8
Projector On/Off 26 Turning the Projector On 26 Turning the Power Off (Putting the Projector into Standby Mode 26 Image Projection 27 About the Setup Guide Adjusting the Colors 42 Progressive 43 Reducing Image Noise (DNR 43 Lamp Setting 43 Adjusting the Projected Image ("SCR - ADJ" Menu 44 - Sharp PGF267X | PG-F267X Operation Manual - Page 9
53 Regarding the Lamp 55 Lamp 55 Caution Concerning the Lamp 55 Replacing the Lamp 55 Removing and Installing the Lamp Unit 56 Resetting the Lamp Timer 57 Storing the Projector 58 How to Use the Storage Case 58 Computer Compatibility Chart 59 Troubleshooting 60 For SHARP Assistance 62 - Sharp PGF267X | PG-F267X Operation Manual - Page 10
the following basic rules for its installation, use and servicing. 1. Read Instructions All the safety and operating instructions should be read before the product is operated. 2. Retain Instructions The safety and operating instructions should be retained for future reference. 3. Heed Warnings All - Sharp PGF267X | PG-F267X Operation Manual - Page 11
short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on the product. 17. Servicing Do not attempt to service instructions. Adjust only those controls that are covered by the operating instructions produce heat. • DLP® and the DLP logo are registered trademarks - Sharp PGF267X | PG-F267X Operation Manual - Page 12
hazard of glass particles if lamp ruptures. In case of lamp rupture, contact your nearest Sharp Authorized Projector Dealer or Service Center for replacement. See "Regarding the Lamp" on page 55. Caution concerning the setup of the projector ■ For minimal servicing and to maintain high image - Sharp PGF267X | PG-F267X Operation Manual - Page 13
the AC outlet and turning off the equipment to be connected. ■ Please read the operation manuals of the projector and the equipment to be connected for instructions on how to make the connections. Using the projector in other countries ■ The power supply voltage and the shape of the plug may vary - Sharp PGF267X | PG-F267X Operation Manual - Page 14
. 3) Double click the pdf file to access the SETUP MANUAL. Note • If the desired pdf file cannot be opened Projector Network Environment 9 Controlling the Projector via LAN 15 Setting up the Projector Using RS-232C or Telnet 20 Resetting the Lamp Timer of the Projector via LAN 30 Troubleshooting - Sharp PGF267X | PG-F267X Operation Manual - Page 15
your country. • Operation manual (this manual and CD-ROM ) Note • Codes in "< >" are Replacement parts codes. Optional accessories ■ Lamp unit ■ Ceiling-mount adaptor on the region. Please check with your nearest Sharp Authorized Projector Dealer or Service Center. 11 - Sharp PGF267X | PG-F267X Operation Manual - Page 16
manual where the topic is explained. Projector Top View Power 26, 53 indicator STANDBY/ON 26 button For turning the power on and putting the projector button For lowering the noise of the cooling fan and extending the lamp life. 30 VOL (Volume) buttons (-O/Q+) For adjusting the speaker sound - Sharp PGF267X | PG-F267X Operation Manual - Page 17
in Z refer to the main pages in this operation manual where the topic is explained. Rear View Terminals AUDIO 1 This projector has a Kensington Security Standard connector for use with a Kensington MicroSaver Security System. Refer to the information that came with the system for instructions on - Sharp PGF267X | PG-F267X Operation Manual - Page 18
and Functions (Continued) STANDBY button 26 For putting the projector into the standby mode. COMPUTER, DVI, 30 S-VIDEO computer. ECO+QUIET button 33 For lowering the noise of the cooling fan and extending the lamp life. 14 26 ON button For turning the power on. 34 FREEZE button For freezing - Sharp PGF267X | PG-F267X Operation Manual - Page 19
remove them using a cloth. • The batteries included with this projector may run down in a short period, depending on how they are kept. Be sure to replace remote control may malfunction under a fluorescent lamp. In this case, move the projector away from the fluorescent lamp. 30° 23 n (7 m) Remote - Sharp PGF267X | PG-F267X Operation Manual - Page 20
with the computer). For details, see the page described below for each step. Setup and Projection In this section, connection of the projector and the computer is explained using one example. 3 STANDBY/ON 8 button 6 INPUT buttons 8 STANDBY button 3 ON button 4 ENTER button 5 Adjustment buttons - Sharp PGF267X | PG-F267X Operation Manual - Page 21
Quick Start 4. Adjust the projected image with the Setup Guide 1 After the projector turns on, the Setup Guide appears. (When "Setup Guide" is set to "On". See page 45.) 2 Follow the steps in the Setup Guide and adjust the focus and height (angle). 3 After adjusting the focus and height (angle), - Sharp PGF267X | PG-F267X Operation Manual - Page 22
-mount Setup ■ It is recommended that you use the optional Sharp ceiling-mount adaptor and unit for this installation. Before mounting the projector, contact your nearest Sharp Authorized Projector Dealer or Service Center to obtain the recommended ceilingmount adaptor and unit (sold separately - Sharp PGF267X | PG-F267X Operation Manual - Page 23
Projection (PRJ) Mode The projector can use any of the 4 projection modes shown in the diagram below. Select the mode most appropriate for the projection setting in use. (You can - Sharp PGF267X | PG-F267X Operation Manual - Page 24
Setting up the Projector (Continued) Screen Size and Projection Distance 4:3 Signal Input (Normal Mode) Picture (Screen) size Diag. [χ] Width Height 150" (381 cm) 305 cm (120") 229 cm (90") - Sharp PGF267X | PG-F267X Operation Manual - Page 25
Compatibility Chart" for a list of computer signals compatible with the projector. Use with computer signals other than those listed may cause keys simultaneously when using a SHARP notebook computer). Refer to the specific instructions in your computer's operation manual to enable your computer's - Sharp PGF267X | PG-F267X Operation Manual - Page 26
provided by the video equipment manufacturer. • When you connect video equipment with a 21-pin RGB output (Euro-scart) to the projector, use a commercially available cable that fits in the projector terminal you want to connect. • The projector does not support RGBC signals via the Euro-scart. 22 - Sharp PGF267X | PG-F267X Operation Manual - Page 27
Cable ø3.5 mm ø3.5 mm stereo or mono audio cable audio output (commercially available or available terminal as Sharp service part QCNWGA038WJPZ) Terminal on the projector AUDIO 1 Monitor Amplifier RCA audio output terminal RCA audio cable (commercially available) AUDIO 2 Audio output - Sharp PGF267X | PG-F267X Operation Manual - Page 28
an RS-232C serial control cable (cross type, commercially available), the computer can be used to control the projector and check the status of the projector. Refer to the "SETUP MANUAL" contained on the supplied CD-ROM for "RS-232C Specifications and Commands". When connecting to a computer using - Sharp PGF267X | PG-F267X Operation Manual - Page 29
Category 5 (CAT.5) type cable (commercially available). Connections Connecting the Power Cord Plug the supplied power cord into the AC socket on the rear of the projector. Then plug into AC outlet. AC socket To AC outlet Power cord (supplied) 25 - Sharp PGF267X | PG-F267X Operation Manual - Page 30
the lamp indicator illuminates, the projector is ready to start operation. Note • About the Lamp Indicator The lamp indicator illuminates to indicate the status of the lamp. Green: The lamp is on. Blinking in green: The lamp is warming up. Red: The lamp is shut down abnormally or the lamp should - Sharp PGF267X | PG-F267X Operation Manual - Page 31
Image Projection About the Setup Guide After turning on the projector, the Setup Guide screen appears to assist you with projector setup. Guidance items 1 FOCUS 2 HEIGHT ADJUST Press ENTER to exit the Setup Guide screen. Note • The Setup Guide screen automatically highlights the items in the - Sharp PGF267X | PG-F267X Operation Manual - Page 32
can be adjusted using the adjustment feet at the front and rear of the projector. When the screen is above the projector, the projection image can be made higher by adjusting the projector. 1 Lift the projector to adjust its height while lifting the HEIGHT ADJUST lever. 2 Remove your hands from - Sharp PGF267X | PG-F267X Operation Manual - Page 33
in the - direction.) 3 Press KEYSTONE. • The on-screen display of the Keystone Correction mode will disappear. • You can also use KEYSTONE on the projector. Info • While adjusting the image using Keystone Correction, straight lines and the edges of the image may appear jagged. Basic Operation 29 - Sharp PGF267X | PG-F267X Operation Manual - Page 34
for the connected equipment. Press COMPUTER, DVI, S-VIDEO or VIDEO on the remote control to select the input mode. • When you press INPUT on the projector or DVI on the remote control, the INPUT list appears. Press P/R to switch the INPUT mode. COMPUTER, DVI, S-VIDEO, VIDEO buttons AV MUTE button - Sharp PGF267X | PG-F267X Operation Manual - Page 35
× 576 STRETCH 1024 × 576 - - - 1024 × 576 Input signal Computer Image type Resolution lower than XGA XGA Resolution higher than XGA 4:3 aspect ratio NORMAL For 4:3 screen FULL DOT BY DOT For 16:9 screen BORDER STRETCH -*2 -*2 *1 *1 Basic Operation SXGA (1280 × 1024) 5:4 aspect - Sharp PGF267X | PG-F267X Operation Manual - Page 36
be used for these images. *2 Same as NORMAL mode. About Copyrights • When using the RESIZE function to select an image size with a different aspect ratio to a TV program or video image, the image will look different from its original appearance. Keep this in mind while choosing an image size. • The - Sharp PGF267X | PG-F267X Operation Manual - Page 37
timer display function Press BREAK TIMER. Note • Break Timer does not function while the projector is operating the "Auto Sync", "FREEZE" or "AV MUTE" functions. 2 Press will decrease, and the lamp life will extend. Note • Refer to "Lamp Setting" on page 43 for details of the Eco+Quiet mode. - Sharp PGF267X | PG-F267X Operation Manual - Page 38
(Auto Sync Adjustment) Displaying an Enlarged Portion of an Image Auto Sync function works when detecting input signal after the projector turns on. Press AUTO SYNC to manually adjust with Auto Sync function. Note • When the optimum image cannot be achieved with Auto Sync adjustment, use the help - Sharp PGF267X | PG-F267X Operation Manual - Page 39
projector with the remote control. For details, see the operation manual of the receiver. Connecting with a USB cable Computer To USB terminal Remote receiver To USB terminal (optional, AN-MR2) or USB cable (commercially available or available as Sharp service that do not support USB. • - Sharp PGF267X | PG-F267X Operation Manual - Page 40
be set in the projector. "Picture" menu PAGE 1 Picture SCR PRJ Picture Mode Contrast 0 Bright 0 Color 0 Tint 0 Sharp 0 Red 0 Blue Off] Page 42 C.M.S. Page 42 Progressive *2 Page 43 DNR Page 43 Lamp Setting Page 43 Reset 2D Progressive 3D Progressive Film Mode Off Level 1 - Sharp PGF267X | PG-F267X Operation Manual - Page 41
Page 44 Background Page 45 Setup Guide [On/Off] Page 45 PRJ Mode Page 45 Language Page 45 Sub menu Normal Full Dot By Dot Area Zoom V- Projector adjustment (PRJ-ADJ)" menu Pict. SCR Auto Sync Auto Power Off Auto Restart STANDBY Mode System Sound Speaker Audio Input RS-232C Fan Mode System Lock Lamp - Sharp PGF267X | PG-F267X Operation Manual - Page 42
IP MAC Address X X : X X : X X : X X : X X : X X Projector XX-XXXX SEL./ADJ. ENTER END "Help" menu Pict. SCR PRJ Net. There is no picture or 49 DHCP Client [On/Off] Page 50 TCP/IP Page 50 MAC Address Page 50 Projector Page 50 The items you can set with the "Help" menu "Help" menu n Page - Sharp PGF267X | PG-F267X Operation Manual - Page 43
• This operation can also be performed by using the buttons on the projector. 1 Press MENU/HELP. • The "Picture" menu screen for the Mode Contrast Bright Red Blue CLR Temp BrilliantColorTM C.M.S. Setting C.M.S. DNR Lamp Setting Reset SEL./ADJ. PRJ Net. Help Standard 0 0 0 0 0 1 On - Sharp PGF267X | PG-F267X Operation Manual - Page 44
Mode Contrast Bright Red Blue CLR Temp BrilliantColorTM C.M.S. Setting C.M.S. DNR Lamp Setting Reset SEL./ADJ. PRJ Net. Help Standard 0 0 0 Picture Mode Contrast Bright Red Blue CLR Temp BrilliantColorTM C.M.S. Setting C.M.S. DNR Lamp Setting Reset SEL./ADJ. PRJ Net. Help Standard 0 15 0 - Sharp PGF267X | PG-F267X Operation Manual - Page 45
*sRGB Gives natural tint to the projected image. Gives sharpness to the projected image. For high fidelity reproduction of computer. The default settings of each item when selecting Picture Mode CLR Temp BrilliantColorTM Lamp Setting 0 1 Bright 0 2 Bright -1 0 Eco + Quiet 0 1 Bright - Sharp PGF267X | PG-F267X Operation Manual - Page 46
making the effect weaker. Q button For more contrast. For more brightness. For more color intensity. For making skin tones greenish. For more sharpness. For stronger red. For stronger blue. For making the effect stronger. *1 Not displayed in the RGB input mode. *2 Not adjustable/selectable when - Sharp PGF267X | PG-F267X Operation Manual - Page 47
with the original encoded as is at 24 frames/second. The projector can convert this film source to progressive video at 60 frames/ images drag. • When TV broadcasts with weak signals are projected. 7 Lamp Setting Selectable items Eco + Quiet Bright Brightness and Power consumption Approx. 60 - Sharp PGF267X | PG-F267X Operation Manual - Page 48
Keystone PRJ Net. Border 0 0 Help 4 OSD Display On 5 Background 6 Setup Guide 7 PRJ Mode 8 Language Logo On Front English SEL./ADJ. ENTER END 1 Setting can also press KEYSTONE on the remote control or on the projector to adjust Keystone Correction. 4 Setting the On-screen Display - Sharp PGF267X | PG-F267X Operation Manual - Page 49
Image Selectable items Description Logo Sharp logo screen Blue Blue screen None - 6 Selecting the Setup Guide Selectable items Description On Displaying the Setup Guide when turning the projector on. Off Not displaying the Setup Guide. 7 Reversing/Inverting Projected Images - Sharp PGF267X | PG-F267X Operation Manual - Page 50
may take some time to complete, depending on the image of the computer connected to the projector. • When the optimum image cannot be achieved with Auto Sync adjustment, use manual adjustments. (See page 51.) 2 Auto Power Off Function Selectable items Description On When no input signal - Sharp PGF267X | PG-F267X Operation Manual - Page 51
where only authorized users have access. Info • If you lose or forget your keycode, contact your nearest Sharp Authorized Projector Dealer or Service Center (see page 62). Even if the product warranty is valid, the keycode reset will incur a charge. Menu operation n Page 39 aSetting/Changing the - Sharp PGF267X | PG-F267X Operation Manual - Page 52
lamp life may vary depending on the usage condition. • When the projector is in standby mode, you can release the keylock by holding down ENTER and STANDBY/ON on the projector simultaneously for about 5 seconds. Info • Keylock cannot be set while the projector is: displaying the "Setup Guide" or - Sharp PGF267X | PG-F267X Operation Manual - Page 53
("Network" menu) Menu operation n Page 39 Pict. SCR PRJ Network Help 1 Password Disable 2 DHCP Client Off 3 TCP/IP MAC Address X X : X X : X X : X X : X X : X X 4 Projector XX-XXXX SEL./ADJ. ENTER END 1 Setting a Password If you do not want others to change the setting for the - Sharp PGF267X | PG-F267X Operation Manual - Page 54
You can confirm the MAC address and projector name. Selectable items MAC Address Projector Description The MAC address of the projector is displayed. The projector name is displayed. Note • For information on how to change the projector name, see "SETUP MANUAL" contained in the supplied CD-ROM - Sharp PGF267X | PG-F267X Operation Manual - Page 55
check marks (✔). • The items in the "Help" menu change, depending on the input signal or setting that you have selected. • If the problem is not solved, refer to "Troubleshooting" (see pages 60 and 61). • When selecting "sRGB" in "Picture Mode", the item "Color is faded or poor" is not displayed - Sharp PGF267X | PG-F267X Operation Manual - Page 56
diluted with water, wring the cloth well and then wipe the projector. Strong cleaning detergents may discolor, warp or damage the coating on the projector. Make sure to test on a small, inconspicuous area on the projector before use. Cleaning the lens ■ Use a commercially available blower to remove - Sharp PGF267X | PG-F267X Operation Manual - Page 57
and temperature warning indicator) on the projector indicate problems inside the projector. ■ If a problem occurs, either the temperature warning indicator or the lamp indicator will illuminate red, and the projector will enter standby mode. After the projector has entered standby mode, follow the - Sharp PGF267X | PG-F267X Operation Manual - Page 58
the AC outlet, and then connect it again. • Remaining lamp life • Carefully replace the lamp. becomes 5% or less. (See page 55.) • Burnt-out lamp • Lamp circuit failure • Take the projector to your nearest Sharp Authorized Projector Dealer or Service Center (see page 62) for repair. • Please - Sharp PGF267X | PG-F267X Operation Manual - Page 59
a 90-day parts and labor limited warranty. All service of this projector under warranty, including lamp replacement, must be obtained through a Sharp Authorized Projector Dealer or Service Center. For the name of the nearest Sharp Authorized Projector Dealer or Service Center, please call toll-free - Sharp PGF267X | PG-F267X Operation Manual - Page 60
1 hour). 3 Remove the lamp unit cover. • Turn over the projector and place it on a board or other raised surface on a table so as not to allow the lens to come in contact with the table. Loosen the user service screw (1) that secures the lamp unit cover. Remove the lamp unit cover (2). STANDBY/ON - Sharp PGF267X | PG-F267X Operation Manual - Page 61
tighten the user service screw (3) to secure the lamp unit cover. Info • If the lamp unit and lamp unit cover are not correctly installed, the power will not turn on, even if the power cord is connected to the projector. Securing screws Resetting the Lamp Timer Reset the lamp timer after replacing - Sharp PGF267X | PG-F267X Operation Manual - Page 62
that the cooling fan has stopped. • Ensure the lens cap is attached to the lens for protection. • Place the projector into the storage case with the lens facing the handle. • Ensure the projector is held in place by using the fixing band. • Do not expose the storage case to direct sunlight or - Sharp PGF267X | PG-F267X Operation Manual - Page 63
is a list of modes that conform to VESA. However, this projector supports other signals that are not VESA standards. PC/MAC Resolution 640 × 640 × 480 SVGA 800 × 600 PC XGA 1024 × 768 MAC 13" MAC 16" MAC 19" MAC 21" WXGA SXGA SXGA+ UXGA VGA SVGA XGA SXGA 1280 × 720 1280 × 768 1280 - Sharp PGF267X | PG-F267X Operation Manual - Page 64
Troubleshooting Problem Check Page • Projector power cord is not plugged into the wall outlet. 25 • Power to the external connected devices is off. - • The selected input mode is wrong. 30 • Cables are incorrectly connected to the projector. 21-25 • Remote control battery has run out. - Sharp PGF267X | PG-F267X Operation Manual - Page 65
's remote control sensor. • The remote control may be too far away from the projector. • If direct sunlight or a strong fluorescent lamp is shining on the projector's remote control sensor, place the projector where it will not be affected by strong light. • The batteries may be depleted or inserted - Sharp PGF267X | PG-F267X Operation Manual - Page 66
you encounter any problems during setup or operation of this projector, first refer to the "Troubleshooting" section on pages 60 and 61. If this operation manual does not answer your question, please contact the SHARP Service departments listed below. U.S.A. Sharp Electronics Corporation 1-888-GO - Sharp PGF267X | PG-F267X Operation Manual - Page 67
PG-F267X 0.55" DLP® Chip Resolution XGA (1024 × 768) Lens F number F 2.5 Focus Manual 9 pin) ×1 Speakers 2 W (Mono) Projection lamp 250 W Rated voltage AC 100 - 240 V Rated Standard As a part of policy of continuous improvement, SHARP reserves the right to make design and specification - Sharp PGF267X | PG-F267X Operation Manual - Page 68
64 Dimensions Units: inches (mm) 3 33/64 (89) 2 61/64 (75) 10 41/64 (270) M4 M4 13/32 (10) M4 13/32 (10) 2 61/64 (75) 2 3/8 (60) 1 27/64 (36) M4 1 3/16 (30) 1 15/16 (49) 4 7/64 (104) 2 45/64 1 31/64 (68.35) (37.65) (Ø110.6) 13/32 (10) 1 5/8 (41.2) 10 7/16 (265) 1/4 (6) - Sharp PGF267X | PG-F267X Operation Manual - Page 69
32 Aspect ratio 31 Audio 27 FREEZE button 34 Front adjustment foot 28 FULL 31 HEIGHT ADJUST lever 28 Help 51 H- 44 Lamp 55 Lamp indicator 53 Lamp Setting 43 Lamp Timer (Life 48 Lamp unit Screen Size and Projection Distance 20 Setup Guide 27, 45 Sharp 42 Speaker 46 SPOT button 33 STANDBY - Sharp PGF267X | PG-F267X Operation Manual - Page 70
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
 |
 |
Introduction
Quick Start
Setup
Connections
Basic
Operation
Useful
Features
Appendix
OPERATION MANUAL
DATA PROJECTOR
MODEL
PG-F267X