Sharp PN-HB651 PN-HB Series PN-HM Series Operation Manual
Sharp PN-HB651 Manual
View all Sharp PN-HB651 manuals
Add to My Manuals
Save this manual to your list of manuals |
Sharp PN-HB651 manual content summary:
- Sharp PN-HB651 | PN-HB Series | PN-HM Series Operation Manual - Page 1
PN-HM851 PN-HM751 PN-HM651 PN-HB851 PN-HB751 PN-HB651 LCD MONITOR OPERATION MANUAL - Sharp PN-HB651 | PN-HB Series | PN-HM Series Operation Manual - Page 2
IMPORTANT: To aid reporting in case of loss or theft, please record the product's model and serial numbers in the space provided. The numbers are located in the rear of the product. Model No.: Serial No.: U.S.A. ONLY - Sharp PN-HB651 | PN-HB Series | PN-HM Series Operation Manual - Page 3
user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. WARNING: FCC Regulations and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of - Sharp PN-HB651 | PN-HB Series | PN-HM Series Operation Manual - Page 4
SHARP LCD product. To ensure safety and many years of trouble service life of your LCD product, please read the following precautions carefully before using the product. 1. Read instructions - All operating instructions must be read and understood before the product is operated. 2. Keep this manual - Sharp PN-HB651 | PN-HB Series | PN-HM Series Operation Manual - Page 5
or spoil your clothing. In order to avoid these problems, make sure to observe the precautions below: • (-) sides of the batteries according to the instructions in the compartment. • Do not mix old reaction control in nuclear facility, medical life support system, and missile launch control in a - Sharp PN-HB651 | PN-HB Series | PN-HM Series Operation Manual - Page 6
INSTRUCTIONS with hard objects. - Please understand that SHARP CORPORATION bears no responsibility for errors made during (See the "APPLICATION Mode Reboot" of Software Guide.) - If you or a third party uses malfunctioning. Refer the servicing to the service representative. Manual Scope - Microsoft - Sharp PN-HB651 | PN-HB Series | PN-HM Series Operation Manual - Page 7
, removing or moving the monitor. • Mounting the monitor on the wall requires special expertise and the work must be performed by an authorized SHARP dealer. You should never attempt to perform any of this work yourself. Our company will bear no responsibility for accidents or injuries caused by - Sharp PN-HB651 | PN-HB Series | PN-HM Series Operation Manual - Page 8
Troubleshooting 50 Specifications 52 Mounting Precautions (For SHARP dealers and service ("AAA" size): 2 CD-ROM (Utility Disk for Windows): 1 Setup Manual: 1 Specification sheet RS-232C conversion cable (3.5mm mini stereo jack): 1 disposal instructions for your area. TIPS • SHARP Content - Sharp PN-HB651 | PN-HB Series | PN-HM Series Operation Manual - Page 9
for function expansion. Offering this attachment location is not a guarantee that future compatible hardware attachments will be released. 24. Vents 25. Handles Caution • Consult your SHARP dealer for attachment/detachment of optional parts. 9E - Sharp PN-HB651 | PN-HB Series | PN-HM Series Operation Manual - Page 10
Part Names nRemote control unit 1 2 1. Signal transmitter 2. Operation buttons (See page 20.) E 10 - Sharp PN-HB651 | PN-HB Series | PN-HM Series Operation Manual - Page 11
connecting/ disconnecting cables. Also, read the manual of the equipment to be connected. • output terminals may cause malfunctions and the other problems. • Do not use any cable that available HDMI cable (conforming to the HDMI standard) that supports 4K. • Select the audio input terminal to be used - Sharp PN-HB651 | PN-HB Series | PN-HM Series Operation Manual - Page 12
When the monitor is in input signal waiting mode. • This terminal does not support HDR signals. The output device's screen will not be displayed properly. 9. Audio APPLICATION mode. For details, see the Software Guide. 13. microSD card slot • This is used in APPLICATION mode. For details, see - Sharp PN-HB651 | PN-HB Series | PN-HM Series Operation Manual - Page 13
Connecting the Power Cord Caution • Use only the power cord supplied with the monitor. 1. Turn off the main power switch. 2. Plug the power cord (supplied) into the AC input terminal. 3. Plug the power cord (supplied) into the power outlet. Main power switch 1 AC input terminal 2 Power cord ( - Sharp PN-HB651 | PN-HB Series | PN-HM Series Operation Manual - Page 14
Removing the Handles The handles can be removed. Handle Handle screws Caution • The removable handles and handle screws are for use with this monitor. Do not use them for any other devices. • To attach handles, be sure to use the handles and handle screws which were removed from this monitor. • - Sharp PN-HB651 | PN-HB Series | PN-HM Series Operation Manual - Page 15
Attaching the USB flash drive / SD card cover 1. Attach the USB flash drive / SD card cover (supplied) to this monitor. USB flash drive / SD card cover (supplied) TIPS • If the cover will be attached, use a USB flash drive no larger than 2-3/4 inch (70 mm) (L) (excluding the terminal) x 11/16 inch - Sharp PN-HB651 | PN-HB Series | PN-HM Series Operation Manual - Page 16
Remote Control Unit Installing the batteries 1. Place your finger on the part marked with the ▲, and then pull the cover off. 2. See the instructions in the compartment and put in the supplied batteries (R03 ("AAA" size) x 2) with their plus (+) and minus (-) sides oriented correctly. 3. Close the - Sharp PN-HB651 | PN-HB Series | PN-HM Series Operation Manual - Page 17
Preparing the Remote Control Unit Remote control sensor out Point the remote control unit toward the remote control sensor on the front of the monitor. For the monitor in landscape orientation For the monitor in portrait orientation 16.4 feet (5m) 10º 10º 16.4 feet Remote control (5m) sensor - Sharp PN-HB651 | PN-HB Series | PN-HM Series Operation Manual - Page 18
Turning Power On/Off Caution • Turn on the monitor first before turning on the computer or playback device. • When switching the main power switch or the POWER button off and back on, always wait for at least 5 seconds. A short interval may result in a malfunction. Turning power on/off Press the - Sharp PN-HB651 | PN-HB Series | PN-HM Series Operation Manual - Page 19
the Software Guide. • Be sure to set the date and time. TIPS • When "Select a Home app" screen appears, select "Launcher:SHARP Open Please contact an authorized SHARP servicing dealer or service center for assistance with internal battery replacement. • Estimated service life of the internal - Sharp PN-HB651 | PN-HB Series | PN-HM Series Operation Manual - Page 20
00:00 AM INPUT MODE : HDMI1 SIZE : WIDE COLOR MODE : STD 3 14 BRIGHT : 31 VOLUME : 15 ID No. :0 4 15 REMOTE No. MODEL :0 : PN-HM751 5 16 VERSION S/N : X.X.X.X : XXXXXXXX 6 17 STATUS : 0000-000000-00-0000 7 18 8 19 NEXT:[ ] END:[RETURN] 9 20 3840x2160 V: 30 Hz H: 67 - Sharp PN-HB651 | PN-HB Series | PN-HM Series Operation Manual - Page 21
Buttons for operating the HDMI-connected device This is used in APPLICATION mode. For details, see the Software Guide. When HDMI CEC LINK is set to AUTO, you can operate devices that support HDMI CEC in modes other than APPLICATION mode. CONTENT MENU button Operation when the input mode is other - Sharp PN-HB651 | PN-HB Series | PN-HM Series Operation Manual - Page 22
Basic Operation nSwitching the screen size Even when the screen size is changed, the display may remain the same depending on the input signal. WIDE Displays image so it fills the entire screen. ZOOM NORMAL The image is enlarged to fill the entire screen without changing the aspect ratio. The - Sharp PN-HB651 | PN-HB Series | PN-HM Series Operation Manual - Page 23
setting, network settings, and other settings in the Software Guide. nExample of operation (Adjusting CONTRAST in the PICTURE menu) 30 BLACK LEVEL 30 TINT 30 COLORS 30 SHARPNESS 12 COLOR ADJUSTMENT ADVANCED RESET D-SUB 4. Press Function not supported by the current input signal) 23 E - Sharp PN-HB651 | PN-HB Series | PN-HM Series Operation Manual - Page 24
Menu Items Menu item details The menu will differ depending on the input mode. nSCREEN You can move the menu screen display position each time the INFORMATION button is pressed. AUTO (D-SUB) The CLOCK, PHASE, H-POS, and V-POS are automatically adjusted. Pressing the ENTER button performs adjustment. - Sharp PN-HB651 | PN-HB Series | PN-HM Series Operation Manual - Page 25
TINT Adjusts the hue. Selecting + changes the color towards green, and selecting - changes it towards magenta. COLORS Adjusts the color intensity. SHARPNESS Adjusts the sharpness of the image. COLOR ADJUSTMENT COLOR MODE Changes the color mode on the screen. The color mode on the screen can also be - Sharp PN-HB651 | PN-HB Series | PN-HM Series Operation Manual - Page 26
pattern display. When USER is selected, set each color's level. HDR (HDMI) To play content that supports HDR, select ON and set HDMI MODES to MODE1. If HDMI MODES is set to MODE2, content that supports HDR cannot be played. To make the setting effective, you must restart this monitor. RESET Resets - Sharp PN-HB651 | PN-HB Series | PN-HM Series Operation Manual - Page 27
CEC function is used. If the device connected to the HDMI input terminal supports CEC, the input mode of the monitor changes to HDMI when playback starts is set to AUTO. If the device connected to the HDMI input terminal supports CEC, you can specify whether or not the monitor power turns on when - Sharp PN-HB651 | PN-HB Series | PN-HM Series Operation Manual - Page 28
Menu Items AUDIO OPTION AUDIO OUTPUT Sets the volume of sound output from the audio output terminal. VARIABLE1......... You can adjust the volume from the speakers of this monitor and the audio output terminal simultaneously by using VOLUME. VARIABLE2......... You can adjust the volume from the - Sharp PN-HB651 | PN-HB Series | PN-HM Series Operation Manual - Page 29
in START TIMING. For images with black edges, etc., depending on the signal, adjustment may not be possible. In this case select OFF. (Perform manual adjustment of the screen.) nMULTI/PIP MULTI ENLARGE (See page 33.) Sets whether or not to use the enlarge function. ADVANCED (ENLARGE) ENLARGE - Sharp PN-HB651 | PN-HB Series | PN-HM Series Operation Manual - Page 30
Menu Items PIP/PbyP PIP MODES Sets the display method. OFF.......... Displays one screen. PIP........... Displays a sub screen inside a main screen. PbyP......... Displays a main screen and a sub screen in a line. PbyP2...... Displays a main screen which measures 2560 pixels in the longest direction - Sharp PN-HB651 | PN-HB Series | PN-HM Series Operation Manual - Page 31
this function is connected to the expansion slot, you can set the order in OPTION. (If the option does not support this function, "OPTION" will not appear.) Input does not change automatically for terminals without a priority setting. The lower the number, the higher the priority. LOGO - Sharp PN-HB651 | PN-HB Series | PN-HM Series Operation Manual - Page 32
to MAIN due to the switching of the monitor's input or due to the operation of the HDMI-connected device. • The sub screen does not support HDR signals. Displaying 4 screens 1. Set CONFIGURE QUAD-SCREEN - QUAD-SCREEN MODE to ON in the MULTI/PIP menu. Or, press the PIP/PbyP button, and - Sharp PN-HB651 | PN-HB Series | PN-HM Series Operation Manual - Page 33
be used. • When quad-screen display is selected, the position 1 screen is output from the DisplayPort output terminal. • Positions 2 to 4 do not support HDR signals. nEnlarge • You can align several monitors and integrate them into a single large screen to display. • Up to 5 monitors can be aligned - Sharp PN-HB651 | PN-HB Series | PN-HM Series Operation Manual - Page 34
Menu Items nSCHEDULE You can set the time to switch the monitor on and off. Set this function with SCHEDULE in the SETUP menu. (See page 27.) SCHEDULE (2) No. (1) POWER 3) DAY OF THE WEEK D-SUB (4) (5) (6) TIME INPUT BRIGHT - - - - - - - - - - - - - Sharp PN-HB651 | PN-HB Series | PN-HM Series Operation Manual - Page 35
CD- ROM drive. 2. Open [CD Drive] in [Computer]. 3. Double-click [Adj_uty.exe]. The adjustment pattern will appear. Adjust the screen automatically or manually. TIPS • If the remote control numbers on the monitor and remote control unit are different, they will both be displayed on INFORMATION1. On - Sharp PN-HB651 | PN-HB Series | PN-HM Series Operation Manual - Page 36
appears, change the setting accordingly. EXTERNAL CONTROLLER INPUT Normally, you do not need to change this setting. When using an optional part, if instruction appears, change the setting accordingly. SIGNAL RESPONSE LEVEL Normally, you do not need to change this setting. Use this option to set the - Sharp PN-HB651 | PN-HB Series | PN-HM Series Operation Manual - Page 37
reset". Other items are not used. * During processing, do not turn off the power. UPDATE MAIN SOFTWARE Not normally used. Used by service technicians when performing repairs or otherwise. 3. Press the RETURN button to return to the normal screen. TIPS • When both abnormal temperature and hardware - Sharp PN-HB651 | PN-HB Series | PN-HM Series Operation Manual - Page 38
Controlling the Monitor with a computer (RS-232C) You can control this monitor from a computer via RS-232C (COM port) on the computer. You can also connect multiple monitors via a daisy chain by using a computer. By assigning ID numbers to each monitor (see page 39), you can make input mode - Sharp PN-HB651 | PN-HB Series | PN-HM Series Operation Manual - Page 39
Controlling the Monitor with a computer (RS-232C) nResponse code format When a command has been executed correctly O K Return code (0DH, 0AH) A response is returned after a command is executed. * If an ID number has been assigned Space (20H) Return code (0DH, 0AH) O K SPC 0 0 1 ID number of - Sharp PN-HB651 | PN-HB Series | PN-HM Series Operation Manual - Page 40
Controlling the Monitor with a computer (RS-232C) nCommands for ID control The command examples shown on this page assume the following connection and ID number set up. ID number: 1 ID number: 2 ID number: 3 ID number: 4 IDST A monitor receiving this command sets its own ID number in the - Sharp PN-HB651 | PN-HB Series | PN-HM Series Operation Manual - Page 41
Controlling the Monitor with a computer (RS-232C) nRepeater control This system has a function to allow setting of multiple monitors connected in a daisy chain using a single command. This function is called repeater control. You can use Repeater control function without assigning ID numbers. [ - Sharp PN-HB651 | PN-HB Series | PN-HM Series Operation Manual - Page 42
Controlling the Monitor with a computer (RS-232C) RS-232C command table How to read the command table Command: Direction: Parameter: Reply: * : Command field (See page 38.) W When the "Parameter" is set in the parameter field (see page 38), the command functions as described under "Control/ - Sharp PN-HB651 | PN-HB Series | PN-HM Series Operation Manual - Page 43
Controlling the Monitor with a computer (RS-232C) PICTURE menu BRIGHT CONTRAST BLACK LEVEL TINT COLORS SHARPNESS COLOR ADJUSTMENT Function COLOR MODE WHITE BALANCE PRESET Command Direction VLMP WR CONT WR BLVL WR TINT WR COLR WR SHRP WR BMOD WR WHBL - Sharp PN-HB651 | PN-HB Series | PN-HM Series Operation Manual - Page 44
Controlling the Monitor with a computer (RS-232C) AUDIO menu Function Command Direction Parameter Reply Control/Response contents * TREBLE AUTR WR -5-5 -5-5 BASS AUBS WR -5-5 -5-5 ○ BALANCE AUBL WR -10-10 -10-10 RESET ARST W 3 - SETUP menu Function Command Direction - Sharp PN-HB651 | PN-HB Series | PN-HM Series Operation Manual - Page 45
Controlling the Monitor with a computer (RS-232C) Function COMMUNICATION MONITOR CONTROL SETTING SELECT BAUD RATE ID SETTING ID No. SET ID NO. SETTING (ONCE) ID NO. SETTING (SUBSEQUENT) REMOTE No. ID CHECK ID DISPLAY AUTO ASSIGN ID No. Command Direction CTLS WR BAUD WR IDST WR IDSL - Sharp PN-HB651 | PN-HB Series | PN-HM Series Operation Manual - Page 46
Controlling the Monitor with a computer (RS-232C) MULTI/PIP menu ENLARGE Enlarge mode Function Command ENLG EMAG EMHV Direction WR WR WR Parameter 0-1 1-4 12(21)-55 Image position (M x N) EPHV WR Image position (2 x 2) EPOS WR Image position (3 x 3) EPOS WR Image position (4 x 4) EPOS - Sharp PN-HB651 | PN-HB Series | PN-HM Series Operation Manual - Page 47
Controlling the Monitor with a computer (RS-232C) Function Command Direction Parameter Reply Control/Response contents * PIP MODES MWIN WR 0-3 0-3 0: OFF, 1: PIP, 2: PbyP, 3: PbyP2 PIP SIZE MPSZ WR 1-64 1-64 PIP POS The longest direction MHPS WR 0-100 0-100 The shortest direction - Sharp PN-HB651 | PN-HB Series | PN-HM Series Operation Manual - Page 48
Controlling the Monitor with a computer (RS-232C) Initialization/Functional Restriction Setting (FUNCTION) menu Function Command Direction Parameter Reply Control/Response contents * ALL RESET RSET W 0-1 0: ALL RESET 1, 1: ALL RESET 2 - ADJUSTMENT LOCK ALCK WR 0 0 OFF ● W 1-2 1: - Sharp PN-HB651 | PN-HB Series | PN-HM Series Operation Manual - Page 49
" in APPLICATION mode. (See Software Guide.) Command-based control You can control the monitor using RS-232C commands (see page 42) via terminal software and other appropriate applications. Read the manual for the terminal software for detailed instructions. (1) Connect the computer to the monitor - Sharp PN-HB651 | PN-HB Series | PN-HM Series Operation Manual - Page 50
problem with your display, before calling for service, please review the following troubleshooting and 53.) • If the connected device does not support 4K, set HDMI MODES to MODE2. The video . • Hardware has a problem. Turn off the monitor and request repair from your SHARP dealer. (When STATUS ALERT - Sharp PN-HB651 | PN-HB Series | PN-HM Series Operation Manual - Page 51
the brightness of the backlight decreases automatically in order to prevent high-temperaturerelated problems. When this occurs, "TEMPERATURE" is displayed on the screen and the Power or around the vents. Remove dust if possible. Ask SHARP dealer about removing internal dust. Troubleshooting 51 E - Sharp PN-HB651 | PN-HB Series | PN-HM Series Operation Manual - Page 52
Specifications nCompatible signal timing (PC) Screen resolution VESA 640 × 480 800 × 600 Wide 848 × 480 1024 × 768 1152 × 864 1280 × 768 1280 × 800 1280 × 960 1280 × 1024 1360 × 768 1400 × 1050 1440 × 900 1600 × 1200 1680 × 1050 1920 × 1200 1280 × 720 1920 × 1080 3840 × 2160 4096 × 2160*1 - Sharp PN-HB651 | PN-HB Series | PN-HM Series Operation Manual - Page 53
Yes Yes Yes Yes Yes Yes Yes Yes Yes nDDC (plug and play) The monitor supports the VESA DDC (Display Data Channel) standard. DDC is a signal standard for plug exchanged between the two. This function can be used if the computer supports DDC and it has been configured to detect plug-and-play monitors. - Sharp PN-HB651 | PN-HB Series | PN-HM Series Operation Manual - Page 54
Specifications nChannels that can be used in wireless LAN USA CANADA MEXICO Standard IEEE802.11b/g/n IEEE802.11ac/a/n IEEE802.11b/g/n IEEE802.11ac/a/n Channel 1-13ch 36/40/44/48/52/56/60/64ch 100/104/108/112/116/120/124/128/132/136/140ch 149/153/157/161/165ch 1-11ch 36/40/44/48/52/56/60/64ch 100 - Sharp PN-HB651 | PN-HB Series | PN-HM Series Operation Manual - Page 55
nHDMI input terminal pins (HDMI Connector) Specifications nD-sub input terminal pins (Mini D-sub 15 pin) No. Function 1 TMDS data 2+ 2 TMDS data 2 shield 3 TMDS data 2- 4 TMDS data 1+ 5 TMDS data 1 shield 6 TMDS data 1- 7 TMDS data 0+ 8 TMDS data 0 shield 9 TMDS data 0- 10 TMDS clock+ - Sharp PN-HB651 | PN-HB Series | PN-HM Series Operation Manual - Page 56
Mounting Precautions (For SHARP dealers and service engineers) • When installing, removing or moving the monitor, ensure that this is carried out by at least 4 people. (PN-HM651/PN-HB651: at least 2 people.) • Be sure to use a wall-mount bracket designed or designated for mounting the monitor. • - Sharp PN-HB651 | PN-HB Series | PN-HM Series Operation Manual - Page 57
PN-HM851-HM751-HM651-HB851-HB751-HB651 Mu EN18M(1)
PN-HM851
PN-HM751
PN-HM651
PN-HB851
PN-HB751
PN-HB651
LCD MONITOR
OPERATION MANUAL