Sharp PN-L703A Operation Manual

Sharp PN-L703A Manual

Get Sharp PN-L703A PDF manuals and user guides View all Sharp PN-L703A manuals
Add to My Manuals
Save this manual to your list of manuals

Sharp PN-L703A manual content summary:

  • Sharp PN-L703A | Operation Manual - Page 1
    PN-L703B PN-L603B LCD MONITOR OPERATION MANUAL
  • Sharp PN-L703A | Operation Manual - Page 2
    IMPORTANT: To aid reporting in case of loss or theft, please record the product's model and serial numbers in the space provided. The numbers are located in the rear of the product. Model No.: Serial No.: U.S.A. ONLY
  • Sharp PN-L703A | Operation Manual - Page 3
    user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. WARNING: FCC Regulations and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of
  • Sharp PN-L703A | Operation Manual - Page 4
    SHARP LCD product. To ensure safety and many years of trouble service life of your LCD product, please read the following precautions carefully before using the product. 1. Read instructions - All operating instructions must be read and understood before the product is operated. 2. Keep this manual
  • Sharp PN-L703A | Operation Manual - Page 5
    your clothing. In order to avoid these problems, make sure to observe the precautions below of the batteries according to the instructions in the compartment. • Do not support the monitor. • Ensuring the monitor is not overhanging the edge of the supporting furniture. • Not placing the monitor
  • Sharp PN-L703A | Operation Manual - Page 6
    INSTRUCTIONS - T he TFT color LCD panel used in this monitor a cleaning of the inside of the monitor from an authorized SHARP servicing dealer or service center. - Do not touch the is broken or malfunctioning. Refer the servicing to the service representative. Manual Scope - Microsoft, Windows,
  • Sharp PN-L703A | Operation Manual - Page 7
    measures to keep the ambient temperature within the required range. • Temperature condition may change when using the monitor together with the optional equipments recommended by SHARP. In such cases, please check the temperature condition specified by the optional equipments. • Do not block any
  • Sharp PN-L703A | Operation Manual - Page 8
    3 DEAR SHARP CUSTOMER 4 SAFETY PRECAUTIONS 4 TIPS AND SAFETY INSTRUCTIONS 6 MOUNTING Troubleshooting 58 Specifications 60 Mounting Precautions (For SHARP dealers and service engineers 65 For information on Touch Panel Settings Tool, Pen Software and Touch Display Link, see the manual
  • Sharp PN-L703A | Operation Manual - Page 9
    panel, the touch panel must be connected to the computer, and Touch Panel Settings Tool and Pen Software must be installed on the computer from the supplied CD-ROM. To install the software, see the manual for each. To use a touch panel with a computer connected to the bottom, connect to the USB
  • Sharp PN-L703A | Operation Manual - Page 10
    Tray 5. Speakers 6. Handles (2 on the PN-L603B) 7. Infrared transmitter/receiver nRear view 8 9 monitor to connect a fixed computer and using the terminal on the side of the monitor page 13.) 27 15. Touch pen adapter port (See page 19 SHARP dealer for attachment/detachment of optional parts. E 10
  • Sharp PN-L703A | Operation Manual - Page 11
    nRemote control unit 1 2 7 3 8 4 9 10 5 11 6 Part Names 1. Signal transmitter 2. POWER button (See page 17.) 3. MUTE button (See page 25.) 4. VOL +/- buttons (See page 25.) BRIGHT +/- buttons (See page 25.) Cursor control ( / / / ) buttons 5. DISPLAY button (See page 25.) 6. MODE
  • Sharp PN-L703A | Operation Manual - Page 12
    connecting/ disconnecting cables. Also, read the manual of the equipment to be connected. • output terminals may cause malfunctions and the other problems. • Do not use any cable that . The screen is adjusted automatically when SELF ADJUST in the MONITOR menu is set to ON. • If the audio output
  • Sharp PN-L703A | Operation Manual - Page 13
    monitor can be output to an external device. • Use a commercially available DisplayPort cable (conforming to the DisplayPort standard). • Outputting HDCP-encrypted video requires an external device which supports AUDIO menu. 11. Touch pen adapter port • Use when an active pen is used. (See page 19
  • Sharp PN-L703A | Operation Manual - Page 14
    (Supplied) AC input terminal Binding Cables The cables connected to the terminals on the rear of the monitor can be fastened with the cable clamp. *1 *2 *1 *2 *1 *2 *2 *2 PN-L703B only *1 Cable clamp (insertion type) *2 Cable Cable clamp attachment Cable clamp attachment Cable Cable clamp
  • Sharp PN-L703A | Operation Manual - Page 15
    .4 feet (5 m) at an angle of approx 10° from the center to the top/ bottom/right/left of the remote control sensor. 2. See the instructions in the compartment and put in the supplied batteries (R-6 ("AA" size) x 2) with their plus (+) and minus (-) sides oriented correctly. 3. Close the cover. TIPS
  • Sharp PN-L703A | Operation Manual - Page 16
    . Do not use them for any other devices. • To attach handles, be sure to use the handles and handle screws which were removed from this monitor. • Be sure the handles are attached securely. Mounting a web camera It is possible to mount a commercially available web camera in the following positions
  • Sharp PN-L703A | Operation Manual - Page 17
    • For a complete electrical disconnection, pull out the main plug. POWER button / Power LED Status Green lit Orange lit Green flashing Status of the monitor Power on Power off (Standby mode) Input signal waiting mode Caution • When switching the main power switch or the POWER button off and back
  • Sharp PN-L703A | Operation Manual - Page 18
    , the internal battery may be exhausted. Please contact your local SHARP servicing dealer or service center for assistance with battery replacement. • Estimated service life of the internal battery: About 5 years (depending on monitor operation) • The initial battery was inserted at the factory when
  • Sharp PN-L703A | Operation Manual - Page 19
    on the computer from the CD-ROM supplied with the monitor. To install the software, see the Touch Pen Utility Operation Manual. • Up to 4 active pens can be used simultaneously. (Up to 10 active pens can be registered.) When active pens are added, they can be used to write simultaneously, and
  • Sharp PN-L703A | Operation Manual - Page 20
    ID labels to the PN-ZL02 to distinguish the active pens. nActive pen actions Function button 1 Pen tip Function button 3 Battery indicator Function button 2 Functions can be assigned to the function buttons. For details, see the Touch Pen Utility Operation Manual. The factory default settings
  • Sharp PN-L703A | Operation Manual - Page 21
    monitor differ according to operating system and application. The functions of touch actions are also different. For details, check Windows Help and the application's support procedures for using the touch pen in the Pen Software, see the Pen Software Operation Manual. When double-tapping with your
  • Sharp PN-L703A | Operation Manual - Page 22
    screen with two fingers and move your fingers closer together to reduce the view, or apart to enlarge the view. Flicks Flick your finger/touch pen in the direction of the function you want to use. Flick your finger Reduction Press-and-hold Same action as right-clicking a mouse. Press briefly
  • Sharp PN-L703A | Operation Manual - Page 23
    USB cable is reconnected. In this case, restart the computer. Eraser The eraser is used with the Pen Software. For the procedure for using the eraser, refer to the Pen Software Operation Manual. Caution • When using the eraser, gently bring the cloth side into contact with the screen. Touching the
  • Sharp PN-L703A | Operation Manual - Page 24
    OUTPUT INVALID ICON is set to ON and touch action is disabled, the TOUCH OUTPUT INVALID icon appears in the monitor. • You can touch the TOUCH OUTPUT INVALID icon in the monitor to enable touch action. • The position of the TOUCH OUTPUT INVALID icon can be changed. (See page 33.) • The TOUCH
  • Sharp PN-L703A | Operation Manual - Page 25
    screen. 8. SIZE (Screen size selection) The menu is displayed. Press or to select the screen size. (See page 26.) 9. DISPLAY Displays monitor information. The display changes from INFORMATION1 → INFORMATION2 → clear display, and so on every time you press this button. • The display disappears
  • Sharp PN-L703A | Operation Manual - Page 26
    select the optimal screen size using the screen-size switching function of this monitor. With some software, there may be noise or distortion at the edges of the screen. This is due to the characteristics of the software, and is not a malfunction. • Depending on the original image size, black bands
  • Sharp PN-L703A | Operation Manual - Page 27
    SETUP MONITOR PIP/PbyP OTHERS BRIGHT 31 CONTRAST 30 BLACK LEVEL 30 TINT 30 COLORS 30 SHARPNESS 12 supported by the current input signal) MOVE OSD···[DISPLAY] BACK···[RETURN] 1920x1080 V: 60 Hz H: 67.5 kHz 4. Press or to adjust the setting. SCREEN PICTURE PICTURE AUDIO SETUP MONITOR
  • Sharp PN-L703A | Operation Manual - Page 28
    Menu Items Menu item details The menu will differ depending on the input mode. nSCREEN You can move the menu screen display position each time DISPLAY is pressed. AUTO (D-SUB1[RGB]/D-SUB2) The CLOCK, PHASE, H-POS, and V-POS are automatically adjusted. Pressing ENTER performs adjustment. Use this
  • Sharp PN-L703A | Operation Manual - Page 29
    TINT Adjusts the hue. Selecting + changes the color towards green, and selecting - changes it towards magenta. COLORS Adjusts the color intensity. SHARPNESS Adjusts the sharpness of the image. COLOR ADJUSTMENT COLOR MODE Changes the color mode on the screen. The color mode on the screen can also be
  • Sharp PN-L703A | Operation Manual - Page 30
    Menu Items ADVANCED AUTO (D-SUB1[RGB]/D-SUB2) The ANALOG GAIN and ANALOG OFFSET are automatically adjusted. Pressing ENTER performs adjustment. ANALOG GAIN (D-SUB1[RGB]/D-SUB2) Adjusts the bright portions of the video input signal. ANALOG OFFSET (D-SUB1[RGB]/D-SUB2) Adjusts the dark portions of the
  • Sharp PN-L703A | Operation Manual - Page 31
    Menu Items nAUDIO TREBLE Adjusts the volume of treble-level sound. BASS Adjusts the volume of bass-level sound. BALANCE Adjusts the balance of the audio sound between right and left. RESET Resets the values of the AUDIO menu items to the factory preset values. Select "ON" and then press . ENTER
  • Sharp PN-L703A | Operation Manual - Page 32
    with the computer connected to the USB 2 port. When "-" is selected, the touch panel cannot be used. LAN SETUP Configures the settings to control the monitor from the computer via LAN. (See page 40.) E 32
  • Sharp PN-L703A | Operation Manual - Page 33
    screen display after the monitor is turned on. When ON is selected, set the delay time with INTERVAL (interval can be set up to 60 seconds in units of adjustment may not be possible. In this case select OFF. (Perform manual adjustment of the screen.) TOUCH OUTPUT INVALID DISP. TOUCH OUTPUT INVALID
  • Sharp PN-L703A | Operation Manual - Page 34
    screen in PbyP2 mode. AUTO OFF Sets the display method when no signals for the sub screen are input in PIP, PbyP, or PbyP2 mode. MANUAL....Displays a main screen and a black sub screen. AUTO.........Displays the main screen as a full screen. E 34
  • Sharp PN-L703A | Operation Manual - Page 35
    and no signal is present in the selected input mode, the monitor automatically changes the selected mode to another mode where a video signal the AV equipment which is connected to D-sub1 input terminal. (AUTO / PAL / PAL-60 / SECAM / NTSC3.58 / NTSC4.43) When AUTO is selected, the color system is
  • Sharp PN-L703A | Operation Manual - Page 36
    Menu Items nDual screen display You can display two screens simultaneously. Set this function with "PIP MODES" in the PIP/PbyP menu. PIP Main screen A sub screen is displayed inside a main screen. Sub screen PbyP Main screen Sub screen A main screen and a sub screen are displayed in a line.
  • Sharp PN-L703A | Operation Manual - Page 37
    - - - - - - - - - - - - 1920x1080 OK···[ENTER] CANCEL···[RETURN] V: 60 Hz H: 67.5 kHz 1. Press or to select the SCHEDULE number, and press . 2. Set Switches the monitor on at the specified time. OFF : Switches the monitor off at the specified time and puts the monitor in standby mode
  • Sharp PN-L703A | Operation Manual - Page 38
    the computer's CD- ROM drive. 2. Open [CD Drive] in [Computer]. 3. Double-click [Adj_uty.exe] in the [Monitor] folder. The adjustment pattern will appear. Adjust the screen automatically or manually. 4. When adjustment is finished, press the [Esc] on the computer's keyboard to quit the adjustment
  • Sharp PN-L703A | Operation Manual - Page 39
    NETWORK, MAIL, SERVICE & SUPPORT, and SNMP (See page 32, and pages 44 to 47.) ADJUSTMENT LOCK You can disable operations on the monitor and the remote need to change this setting. When using an optional part, if instruction appears, change the setting accordingly. 4. Press RETURN to return to
  • Sharp PN-L703A | Operation Manual - Page 40
    PC on the LAN. You can also configure the monitor to send e-mail notification when it has a problem. The connection requires a commercially available LAN cable an address automatically, change this setting to ON. To set the address manually, set this to OFF. IP ADDRESS If the DHCP CLIENT is set to
  • Sharp PN-L703A | Operation Manual - Page 41
    be changing the IP address, subnet mask, and default gateway settings back to these settings afterwards. 8. Click [OK] and then reboot the PC. TIPS • This monitor is factory preset as shown below. (When DHCP CLIENT is set to OFF) IP Address : 192.168.150.2 Subnet Mask : 255.255.255.0 Default
  • Sharp PN-L703A | Operation Manual - Page 42
    44.), and click [OK]. 3. You can check, control, and change the monitor's status and settings by clicking the menu items on the left side of the obtain an address automatically, change this setting to "ON". To set the address manually, set this to "OFF". IP ADDRESS If the DHCP CLIENT is set to
  • Sharp PN-L703A | Operation Manual - Page 43
    's menu. • SCREEN (See page 28.) • PICTURE (See pages 29 to 30.) • AUDIO (See page 31.) • SETUP (See pages 31 to 32.) • MONITOR (See page 33.) • SCHEDULE (See page 37.) • PIP/PbyP (See page 34.) • OTHERS (See page 35.) • FUNCTION (See page 39.) ■ CONTROL You can control the
  • Sharp PN-L703A | Operation Manual - Page 44
    obtain an address automatically, change this setting to ON. To set the address manually, set this to OFF. IP ADDRESS If the DHCP CLIENT is set to access to this monitor. After entering a user name and password, click [Apply]. ACCEPT IP ADDRESS You can limit access to this monitor by registering IP
  • Sharp PN-L703A | Operation Manual - Page 45
    as it should appear on the Internet Explorer screen. AUTO LOGOUT TIME Specify the time (in minutes) to elapse before automatically disconnecting this monitor from the network. Specify in minutes from 1 to 65535. A value of '0' will disable this function. DATA PORT Specify the TCP port number to
  • Sharp PN-L703A | Operation Manual - Page 46
    a PC (LAN) ■ MAIL (RECIPIENT) This screen allows you to specify the recipients of the e-mail sent periodically or when the monitor has an error. ■ MAIL (PERIODICAL) When PERIODICAL for CONDITION of MAIL (RECIPIENT) is checked, set the date and time to send the mail. RECIPIENT E-MAIL
  • Sharp PN-L703A | Operation Manual - Page 47
    and symbols can be used for the community name, user name and password. ■ SERVICE & SUPPORT (URL INFORMATION) You can display a specific URL in the URL INFORMATION field on the INFORMATION screen when an error occurs in the monitor. (See page 43.) SNMP SETTING Set whether to enable or disable SNMP
  • Sharp PN-L703A | Operation Manual - Page 48
    other appropriate applications. In order to use this function, enable a connection to the monitor through Internet Explorer. Read the manual for the terminal software for detailed instructions. (1) Connect the PC to the monitor. 1. Specify the IP address and data port number and connect the PC to
  • Sharp PN-L703A | Operation Manual - Page 49
    as a bad connection between the PC and monitor, nothing is returned (not even ERR). • "ERR" may be returned when a command cannot be received correctly due to interference from the surrounding environment. Please ensure that the system or software retries the command if this occurs. nCommunication
  • Sharp PN-L703A | Operation Manual - Page 50
    Controlling the Monitor with a PC (LAN) [Advanced operation] Control command table How to read the command table Command: Direction: Parameter: Reply: Command field (See page 48.) W When the "
  • Sharp PN-L703A | Operation Manual - Page 51
    the Monitor signal. PICTURE menu BRIGHT CONTRAST BLACK LEVEL TINT COLORS SHARPNESS COLOR ADJUSTMENT Function COLOR MODE WHITE THRU BALANCE PRESET WR BLVL WR TINT WR COLR WR SHRP WR BMOD WR CTMP WR Parameter 0-31 0-60 0-60 0-60 0-60 0-24 0 2 3 4 0 1-28 CRTR WR CRTG WR CRTB WR OFSR WR
  • Sharp PN-L703A | Operation Manual - Page 52
    Controlling the Monitor with a PC (LAN) Function ADVANCED AUTO ANALOG GAIN ANALOG OFFSET 3D-NR (AV input) MPEG-NR (AV input) 3D-Y/C RGB INPUT RANGE (HDMI1[AV]) RGB
  • Sharp PN-L703A | Operation Manual - Page 53
    Controlling the Monitor with a PC (LAN) SETUP menu Function Date/time setting DATE DISPLAY FORMAT TIME DISPLAY FORMAT SCHEDULE SCHEDULE BRIGHTNESS LANGUAGE INPUT SELECT INPUT MODE NAME AUDIO
  • Sharp PN-L703A | Operation Manual - Page 54
    Controlling the Monitor with a PC (LAN) MONITOR menu Function OSD H- ICON CHANGE DISPLAY TOIP WR POSITION TOUCH OPERATION MODE TOMD WR 0-1 0-1 0-60 0-1 10-200 0-1 0-3 0-2 TOUCH PANEL MODE GMDP WR 0-1 PIP/PbyP MAIN, 2: SUB 0: POS1, 1: POS2 0: POS1, 1: POS2, 2: POS3 0: MANUAL, 1: AUTO E 54
  • Sharp PN-L703A | Operation Manual - Page 55
    Controlling the Monitor with a PC (LAN) OTHERS menu Function SCREEN MOTION PATTERN MOTION TIME1 MOTION TIME2 (PATTERN1) MOTION , 1080p , etc. 0-1 0: OFF, 1: ON 0-2 0: MODE1, 1: MODE2, 2: MODE3 (When the input mode is AV) 0-5 0: AUTO, 1: PAL, 2: PAL-60, 3: SECAM, 4: NTSC3.58, 5: NTSC4.43 55 E
  • Sharp PN-L703A | Operation Manual - Page 56
    ALL RESET 2 0-2 0: OFF, 1:ON1, 2:ON2 When STANDBY MODE is set to LOW POWER, ON2 cannot be selected (ERR). 0-2 0: REMOTE CONTROL, 1: MONITOR BUTTONS, 2: BOTH "ERR" when OFF is selected for ADJUSTMENT LOCK. 0-2 0: ON1, 1: OFF, 2: ON2 0-1 0: ON, 1: OFF 0-2 0: OFF, 1: OSD & LED, 2: LED 0-2 0: OFF
  • Sharp PN-L703A | Operation Manual - Page 57
    1-16 xxxx ··· xxxx (xxxx: 32 pieces) xxxx: 0000-1023 xxxx: User data of 32 pieces 0 Initialize the user data. 0 Save the user data in the monitor. To transfer the GAMMA user data Use the user data transfer commands (UGRW, UGGW and UGBW). For each of the R, G and B colors, divide the total
  • Sharp PN-L703A | Operation Manual - Page 58
    If you are experiencing any problem with your display, before calling for service, please review the following troubleshooting tips. There is no picture or sound. • Is the power cord disconnected? (See page 14.) • Is the main power switch off? (See page 17.) • Is the monitor in standby mode (the
  • Sharp PN-L703A | Operation Manual - Page 59
    rise in temperature is likely. Internal temperature rises quickly if the vents on the monitor are blocked. - Internal temperature rises quickly if dust accumulates inside the monitor or around the vents. Remove dust if possible. Ask SHARP dealer about removing internal dust. Troubleshooting 59 E
  • Sharp PN-L703A | Operation Manual - Page 60
    Specifications nProduct Specifications Model PN-L703B PN-L603B LCD component 70" Class [69-1/2 inch (176.6cm) 60" Class [60-1/16 inch (152.5cm) diagonal] TFT LCD diagonal] TFT LCD Max. resolution (pixels) 1920 x 1080 Max. colors Approx. 1.06 billion colors Pixel pitch 0.802 mm (H) × 0.
  • Sharp PN-L703A | Operation Manual - Page 61
    /16 [1062] 39-3/4 [1010] Opening height (35-13/16 [910]) 3-1/4 [82] [PN-L603B] 3-11/16 [94] 1-15/16 [49] 31-11/16 [805] 56-9/16 [1437 mounting the monitor, be sure to use a wall-mount bracket that complies with the VESA-compatible mounting method. SHARP recommends weight of the monitor. 61 E
  • Sharp PN-L703A | Operation Manual - Page 62
    *1 Upper value: PN-L703B, Lower value: PN-L603B. *2 When CONNECT AUTO INPUT SELECT and NO SIGNAL AUTO INPUT SEL. are set to OFF. nDDC (plug and play) The monitor supports the VESA DDC ( 1kHz 46.9kHz 31.0kHz 48.4kHz 56.5kHz 60.0kHz 67.5kHz 47.8kHz 60.3kHz 49.7kHz 60.0kHz 64.0kHz 80.0kHz 47.7kHz 65.
  • Sharp PN-L703A | Operation Manual - Page 63
    nCompatible signal timing (AV) Screen resolution 1920 × 1080p 1920 × 1080i 1280 × 720p 720 × 576p 720 × 480p 640 × 480p(VGA) 720(1440) × 576i 720(1440) × 480i Frequency 24Hz 50Hz 59.94Hz 60Hz 50Hz 59.94Hz 60Hz 50Hz 59.94Hz 60Hz 50Hz 59.94Hz 60Hz 59.94Hz 60Hz 50Hz 59.94Hz 60Hz HDMI Yes Yes Yes Yes
  • Sharp PN-L703A | Operation Manual - Page 64
    Specifications nD-sub input terminal pins (Mini D-sub 15 pin) No. Function No. Function 1 Red video signal input 9 +5V 2 Green video signal input 10 GND 3 Blue video signal input 11 N.C. 4 N.C. 12 DDC data 5 GND 13 Hsync signal input 6 GND for red video signal 14 Vsync signal input 7
  • Sharp PN-L703A | Operation Manual - Page 65
    Mounting Precautions (For SHARP dealers and service engineers) • When installing, removing or moving the monitor, ensure that this is carried out by at least 4 people. • Be sure to use a wall-mount bracket designed or designated for mounting the monitor. • This monitor is designed to be installed on
  • Sharp PN-L703A | Operation Manual - Page 66
    PN-L703B-L603B M EN14C(1)
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
PN-L703B
PN-L603B
LCD MONITOR
OPERATION MANUAL