Sharp PN-L805H Operation Manual

Sharp PN-L805H Manual

Get Sharp PN-L805H PDF manuals and user guides View all Sharp PN-L805H manuals
Add to My Manuals
Save this manual to your list of manuals

Sharp PN-L805H manual content summary:

  • Sharp PN-L805H | Operation Manual - Page 1
    PN-L805H LCD MONITOR OPERATION MANUAL
  • Sharp PN-L805H | Operation Manual - Page 2
    IMPORTANT: To aid reporting in case of loss or theft, please record the product's model and serial numbers in the space provided. The numbers are located in the rear of the product. Model No.: Serial No.: U.S.A. ONLY
  • Sharp PN-L805H | Operation Manual - Page 3
    user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. WARNING: FCC Regulations and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of
  • Sharp PN-L805H | Operation Manual - Page 4
    SHARP LCD product. To ensure safety and many years of trouble service life of your LCD product, please read the following precautions carefully before using the product. 1. Read instructions - All operating instructions must be read and understood before the product is operated. 2. Keep this manual
  • Sharp PN-L805H | Operation Manual - Page 5
    spoil your clothing. In order to avoid these problems, make sure to observe the precautions below: • (-) sides of the batteries according to the instructions in the compartment. • Do not mix reaction control in nuclear facility, medical life support system, and missile launch control in a weapon
  • Sharp PN-L805H | Operation Manual - Page 6
    INSTRUCTIONS a cleaning of the inside of the monitor from an authorized SHARP servicing dealer or service center. - Do not touch the screen when the monitor power if it is broken or malfunctioning. Refer the servicing to the service representative. Manual Scope - M icrosoft and Windows are either
  • Sharp PN-L805H | Operation Manual - Page 7
    , removing or moving the monitor. • Mounting the monitor on the wall requires special expertise and the work must be performed by an authorized SHARP dealer. You should never attempt to perform any of this work yourself. Our company will bear no responsibility for accidents or injuries caused by
  • Sharp PN-L805H | Operation Manual - Page 8
    Contents IMPORTANT INFORMATION 3 DEAR SHARP CUSTOMER 4 SAFETY PRECAUTIONS 4 TIPS AND SAFETY INSTRUCTIONS 6 MOUNTING PRECAUTIONS 7 operation] Command-based control 63 Troubleshooting 64 Specifications 66 Mounting Precautions (For SHARP dealers and service engineers 71 For information on
  • Sharp PN-L805H | Operation Manual - Page 9
    stereo  SHARP Display Connect License: 1 jack): 1  Setup Manual: 1  SHARP Corporation holds authorship rights to the Utility Disk program. Do not reproduce it without permission. * For environmental protection! Do not dispose of batteries in household waste. Follow the disposal instructions
  • Sharp PN-L805H | Operation Manual - Page 10
    monitor to connect a fixed computer and using the terminal on the side of the monitor to connect a mobile computer. Caution • Consult your SHARP dealer for attachment/detachment of optional parts. 9. Vents 10. Optional attachment section This section is used to connect optional 26 hardware for
  • Sharp PN-L805H | Operation Manual - Page 11
    nRemote control unit 1 Part Names 1. Signal transmitter 2. Operation buttons (See page 26.) 2 11 E
  • Sharp PN-L805H | Operation Manual - Page 12
    / disconnecting cables. Also, read the manual of the equipment to be connected. terminals may cause malfunctions and the other problems. • Do not use any cable commercially available HDMI cable (conforming to the HDMI standard) that supports 4K. • Select the audio input terminal to be used in
  • Sharp PN-L805H | Operation Manual - Page 13
    to an external device. • Use a commercially available DisplayPort cable (conforming to the DisplayPort standard) that supports 4K. • Outputting HDCP-encrypted video requires an external device which supports HDCP. • Output of video may not be possible with some versions of HDCP. 9. Audio output
  • Sharp PN-L805H | Operation Manual - Page 14
    Connecting the Power Cord Caution • Use only the power cord supplied with the monitor. 1. Turn off the main power switch. 2. Plug the power cord (supplied) into the AC input terminal. 3. Plug the power cord (supplied) into the power outlet. Main power switch 1 For power outlet 3 2 Power cord (
  • Sharp PN-L805H | Operation Manual - Page 15
    . 16.4 feet (5 m) at an angle of approx 10° from the center to the top/ bottom/right/left of the remote control sensor. 2. See the instructions in the compartment and put in the supplied batteries (LR03 ("AAA" size) x 2) with their plus (+) and minus (-) sides oriented correctly. 3. Close the cover
  • Sharp PN-L805H | Operation Manual - Page 16
    Removing the Handles The handles can be removed. Handle Handle screws Caution • The removable handles and handle screws are for use with this monitor. Do not use them for any other devices. • To attach handles, be sure to use the handles and handle screws which were removed from this monitor. •
  • Sharp PN-L805H | Operation Manual - Page 17
    Turning Power On/Off Caution • Turn on the monitor first before turning on the computer or playback device. • When switching the main power switch or the POWER button off and back on, always wait for at least 5 seconds. A short interval may result in a malfunction. Turning power off Turning power
  • Sharp PN-L805H | Operation Manual - Page 18
    the power is turned on, the internal battery may be exhausted. Please contact your local SHARP servicing dealer or service center for assistance with internal battery replacement. • Estimated service life of the internal battery: About 5 years (depending on monitor operation) • The initial battery
  • Sharp PN-L805H | Operation Manual - Page 19
    panel, the touch pen and the eraser, install the software below. • Touch pen Management Tool • Pen Software To install the software, see the manual for each. Touch Pen Preparations nInserting the battery 2 touch pens are supplied. Insert the batteries in the touch pens. 1. Remove the battery cap
  • Sharp PN-L805H | Operation Manual - Page 20
    pens that are used with this monitor (supplied touch pens or optional PN-ZL06). Function button 1 Function button 2 Pointer part Pen tip LED Function and how to use this software, see the Touch pen Management Tool Operation Manual. Palm cancel mode function When you write with the touch pen, you
  • Sharp PN-L805H | Operation Manual - Page 21
    . (Up to 8 touch pens can be registered.) Item Model Remarks Touch pen PN-ZL06 For capacitive touch panel • To use an optional touch pen with the monitor touch pen pairing. For details, see the Touch pen Management Tool Operation Manual. • Perform touch pen pairing for one pen at a time. TIPS
  • Sharp PN-L805H | Operation Manual - Page 22
    For details, check operating system Help and the application's support documentation. Double-tap Same action as double-clicking a mouse for using the touch pen in the Pen Software, see the Pen Software Operation Manual. nCommon finger and touch pen actions Single-tap Same action as left-clicking a
  • Sharp PN-L805H | Operation Manual - Page 23
    Touch action Drag-and-drop Same action as drag-and-drop with a mouse. Touch the screen with your finger/touch pen and move without lifting. When you have finished the movement, lift your finger/ touch pen. nFinger actions Zoom Use in a screen that is capable of enlargement/reduction. Touch the
  • Sharp PN-L805H | Operation Manual - Page 24
    supplied with this monitor. The eraser is used with the Pen Software. For the procedure for using the eraser, refer to the Pen Software Operation Manual. Caution • Hold the main body of the eraser with your bare fingers. The screen will not respond if you are wearing a glove. The main body
  • Sharp PN-L805H | Operation Manual - Page 25
    Basic Operation Using the touch menu You can touch the screen to change input mode, volume, and other settings. 1. Touch the TOUCH MENU button. (2) V olume adjustment Adjusts the volume. 23 Increases the volume. TOUCH MENU button 2. Touch the screen to change settings. INPUT SIDE INPUT
  • Sharp PN-L805H | Operation Manual - Page 26
    Basic Operation Using the remote control unit 11 1 12 13 2 3 14 4 15 5 16 6 17 7 18 8 19 9 20 10 4. MODE (Color mode selection) Each time you press this button, the color mode changes in the following order: STD (Standard) → VIVID → sRGB → HIGH ILLUMINANCE → STD... • HIGH
  • Sharp PN-L805H | Operation Manual - Page 27
    COLOR MODE BRIGHT VOLUME REMOTE No. MODEL VERSION S/N STATUS TOUCH PANEL 01/01/2018 MON 12:00:00 AM : HDMI1 : WIDE : STD : 31 : 15 :0 : PN-L805H xxxxxxxx : 0000-000000-00-0000 : OK LAN 3840 x 2160 NEXT:[ ] END:[RETURN] V: 30 Hz H: 67.5 kHz INFORMATION2 RS-232C/LAN SELECT DHCP CLIENT IP ADDRESS
  • Sharp PN-L805H | Operation Manual - Page 28
    Basic Operation nSwitching the screen size Even when the screen size is changed, the display may remain the same depending on the input signal. WIDE Displays image so it fills the entire screen. ZOOM 1 ZOOM 2 The image is enlarged to fill the entire screen without changing the aspect ratio. The
  • Sharp PN-L805H | Operation Manual - Page 29
    /PIP OTHERS BRIGHT 31 CONTRAST 30 BLACK LEVEL 30 TINT 30 COLORS 30 SHARPNESS 12 COLOR ADJUSTMENT ADVANCED RESET D-SUB[RGB] TIPS • Items that cannot be selected appear in gray. (e.g. Function not supported by the current input signal) MOVE OSD:[INFORMATION] BACK:[RETURN] 1920x1080
  • Sharp PN-L805H | Operation Manual - Page 30
    Menu Items Configuring settings in the touch menu You can configure the following settings from the touch menu. You can configure the settings by touch operation. PICTURE CONFIGURE QUADSCREEN OTHERS BRIGHT CONTRAST BLACK LEVEL COLOR MODE SETTING INITIAL SCREEN PRIORITY: AUTO INPUT SEL. SAVE LAST
  • Sharp PN-L805H | Operation Manual - Page 31
    Menu Items Menu item details The menu will differ depending on the input mode. nSCREEN You can move the menu screen display position each time the INFORMATION button is pressed. AUTO (D-SUB[RGB]) The CLOCK, PHASE, H-POS, and V-POS are automatically adjusted. Pressing the ENTER button performs
  • Sharp PN-L805H | Operation Manual - Page 32
    TINT Adjusts the hue. Selecting + changes the color towards green, and selecting - changes it towards magenta. COLORS Adjusts the color intensity. SHARPNESS Adjusts the sharpness of the image. COLOR ADJUSTMENT COLOR MODE Changes the color mode on the screen. The color mode on the screen can also be
  • Sharp PN-L805H | Operation Manual - Page 33
    Menu Items ADVANCED AUTO (D-SUB[RGB]) The ANALOG GAIN and ANALOG OFFSET are automatically adjusted. Pressing the ENTER button performs adjustment. ANALOG GAIN (D-SUB[RGB]) Adjusts the bright portions of the video input signal. ANALOG OFFSET (D-SUB[RGB]) Adjusts the dark portions of the video input
  • Sharp PN-L805H | Operation Manual - Page 34
    the HDMI CEC function. If the device connected to the HDMI input terminal supports CEC, the input mode of the monitor changes to HDMI when playback starts is set to AUTO. If the device connected to the HDMI input terminal supports CEC, you can specify whether or not the monitor power turns on when
  • Sharp PN-L805H | Operation Manual - Page 35
    set to ON, the monitor can be controlled via network using equipment and application software of Crestron Electronics, Inc. This monitor supports application software RoomView from Crestron Electronics, Inc. This is a function to connect a system developed by Crestron Electronics, Inc. which manages
  • Sharp PN-L805H | Operation Manual - Page 36
    TIMING. For images with black edges, etc., depending on the signal, adjustment may not be possible. In this case select OFF. (Perform manual adjustment of the screen.) TOUCH PANEL TOUCH OUTPUT INVALID DISP. TOUCH OUTPUT INVALID ICON....... Sets whether the TOUCH OUTPUT INVALID icon is displayed when
  • Sharp PN-L805H | Operation Manual - Page 37
    Menu Items nMULTI/PIP PIP/PbyP PIP MODES Sets the display method. OFF Displays one screen. PIP Displays a sub screen inside a main screen. PbyP........... Displays a main screen and a sub screen in a line. PbyP2........ Displays a main screen which measures 2560 pixels in the longest direction and
  • Sharp PN-L805H | Operation Manual - Page 38
    this function is connected to the expansion slot, you can set the order in OPTION. (If the option does not support this function, OPTION will not appear.) Input does not change automatically for terminals without a priority setting. The lower the number, the higher the priority. LOGO
  • Sharp PN-L805H | Operation Manual - Page 39
    Menu Items nDual-screen display You can display two screens simultaneously. Set this function with PIP MODES of PIP/PbyP in the MULTI/ PIP menu. Or, press the PIP/PbyP button, and select the mode. PIP Main screen A sub screen is displayed inside a main screen. Sub screen PbyP Main screen Sub
  • Sharp PN-L805H | Operation Manual - Page 40
    Menu Items TIPS • You might infringe on a copyright of the author which is protected by copyright law when you display the images of the computer screen and television/VCR simultaneously for profit-making or to show the image to the public. • When quad-screen display is selected, screen size cannot
  • Sharp PN-L805H | Operation Manual - Page 41
    Menu Items (6) BRIGHT Sets the brightness when changing the screen brightness at a specified time. Caution • Do not switch off the main power after setting the SCHEDULE. • Specify the correct date and time. (See page 34.) SCHEDULE does not function unless the date and time are specified. • Check
  • Sharp PN-L805H | Operation Manual - Page 42
    [CD Drive] in [Computer]. 3. Double-click [Adj_uty.exe] in the [Monitor] folder. The adjustment pattern will appear. Adjust the screen automatically or manually. 4. When adjustment is finished, press the [Esc] on the computer's keyboard to quit the adjustment program. 5. Eject the CD-ROM from the CD
  • Sharp PN-L805H | Operation Manual - Page 43
    LAN SETUP, RS-232C/LAN SELECT, REMOTE No., BAUD RATE, NETWORK, MAIL, SERVICE & SUPPORT, and SNMP. (See page 35, and pages 58 to 61.) ADJUSTMENT LOCK need to change this setting. When using an optional part, if instruction appears, change the setting accordingly. SIGNAL RESPONSE LEVEL Normally, you do
  • Sharp PN-L805H | Operation Manual - Page 44
    Controlling the Monitor with a computer (RS-232C) You can control this monitor from a computer via RS-232C (COM port) on the computer. TIPS • To control the monitor via RS-232C, set RS-232C/LAN SELECT to RS-232C. • You cannot use RS-232C and LAN control simultaneously. Computer connection Connect
  • Sharp PN-L805H | Operation Manual - Page 45
    Controlling the Monitor with a computer (RS-232C) nResponse code format When a command has been executed correctly O K Return code (0DH, 0AH) A response is returned after a command is executed. When a command has not been executed E R R Return code (0DH, 0AH) TIPS • "ERR" is returned when
  • Sharp PN-L805H | Operation Manual - Page 46
    Controlling the Monitor with a computer (RS-232C) Setting of the GAMMA user data nTo transfer the GAMMA user data Use the user data transfer commands (UGRW, UGGW and UGBW). For each of the R, G and B colors, divide the total 512 pieces of user data into 16 blocks, and transfer 32 pieces of data
  • Sharp PN-L805H | Operation Manual - Page 47
    Controlling the Monitor with a computer (RS-232C) RS-232C command table How to read the command table Command: Direction: Parameter: Reply: * : Command field (See page 44.) W When the "Parameter" is set in the parameter field (see page 44), the command functions as described under "Control/
  • Sharp PN-L805H | Operation Manual - Page 48
    Controlling the Monitor with a computer (RS-232C) SCREEN menu Function Command Direction Parameter Reply Control/Response contents * Auto ASNC W 1 When the input mode is D-SUB[RGB]. CLOCK CLCK WR 0-1200 0-1200 When the input mode is D-SUB[RGB]. Varies depending on the signal. PHASE
  • Sharp PN-L805H | Operation Manual - Page 49
    Controlling the Monitor with a computer (RS-232C) PICTURE menu BRIGHT CONTRAST BLACK LEVEL TINT COLORS SHARPNESS COLOR ADJUSTMENT Function COLOR MODE WHITE BALANCE PRESET Command Direction VLMP WR CONT WR BLVL WR TINT WR COLR WR SHRP WR BMOD WR WHBL
  • Sharp PN-L805H | Operation Manual - Page 50
    Controlling the Monitor with a computer (RS-232C) AUDIO menu Function Command Direction Parameter Reply Control/Response contents * TREBLE AUTR WR -5-5 -5-5 BASS AUBS WR -5-5 -5-5 ○ BALANCE AUBL WR -10-10 -10-10 RESET ARST W 3 - SETUP menu Function DATE/TIME SETTING DATE
  • Sharp PN-L805H | Operation Manual - Page 51
    Controlling the Monitor with a computer (RS-232C) Function AUDIO OPTION SPEAKER SELECT AUDIO OUTPUT AUDIO INPUT LEVEL MONAURAL AUDIO TOUCH INPUT BOTTOM USB SELECT (Long side) SIDE USB (Short side) Command Direction SPSL WR AOUT WR AIVP WR MONO WR USCB WR USCS WR START INPUT MODE
  • Sharp PN-L805H | Operation Manual - Page 52
    Controlling the Monitor with a computer (RS-232C) MULTI/PIP menu Function PIP MODES PIP SIZE PIP POS The longest direction The shortest direction PIP POS LD+SD BATCH Command MWIN MPSZ MHPS Direction WR WR WR MVPS WR MPOS W R PIP BLEND PIP SOURCE MWBL WR MWIP WR SOUND CHANGE MAIN POS
  • Sharp PN-L805H | Operation Manual - Page 53
    Controlling the Monitor with a computer (RS-232C) Initialization/Functional Restriction Setting (FUNCTION) menu Function Command Direction Parameter Reply Control/Response contents * ALL RESET RSET W 0-1 0: ALL RESET 1, 1: ALL RESET 2 - ADJUSTMENT LOCK ALCK WR 0-2 0-2 0: OFF, 1:ON
  • Sharp PN-L805H | Operation Manual - Page 54
    also configure the monitor to send e-mail notification when it has a problem. The connection requires a commercially available LAN cable (UTP cable, Category an address automatically, change this setting to ON. To set the address manually, set this to OFF. IP ADDRESS If the DHCP CLIENT is set to
  • Sharp PN-L805H | Operation Manual - Page 55
    Controlling the Monitor with a computer (LAN) nTo set from a computer When the monitor is connected to a computer, LAN settings can be configured via computer. Set up process (1) Connect your monitor to a computer (2) Specify the computer's IP address (3) Configure the monitor's LAN settings (1)
  • Sharp PN-L805H | Operation Manual - Page 56
    . DHCP CLIENT If your LAN has a DHCP server and you wish to obtain an address automatically, change this setting to ON. To set the address manually, set this to OFF. IP ADDRESS If the DHCP CLIENT is set to OFF, specify an IP address. SUBNET MASK If the DHCP CLIENT is
  • Sharp PN-L805H | Operation Manual - Page 57
    nINFORMATION Information about this monitor appears. Controlling the Monitor with a computer (LAN) nADJUSTMENT You can adjust these settings which are also available on the monitor's menu. • SCREEN (See page 31.) • PICTURE (See page 32.) • PICTURE (ADVANCED) (See page 33.) • AUDIO (See page 33.) •
  • Sharp PN-L805H | Operation Manual - Page 58
    . DHCP CLIENT If your LAN has a DHCP server and you wish to obtain an address automatically, change this setting to ON. To set the address manually, set this to OFF. IP ADDRESS If the DHCP CLIENT is set to OFF, specify an IP address. SUBNET MASK If the DHCP CLIENT is
  • Sharp PN-L805H | Operation Manual - Page 59
    Controlling the Monitor with a computer (LAN) nNETWORK (GENERAL) This screen allows you to specify the general LAN settings. nMAIL (ORIGINATOR) This screen allows you to configure the e-mail sent periodically or when the monitor has an error. The settings depend on the configuration of your LAN.
  • Sharp PN-L805H | Operation Manual - Page 60
    Controlling the Monitor with a computer (LAN) nMAIL (RECIPIENT) This screen allows you to specify the recipients of the e-mail sent periodically or when the monitor has an error. nMAIL (PERIODICAL) When PERIODICAL for CONDITION of MAIL (RECIPIENT) is checked, set the date and time to send the mail
  • Sharp PN-L805H | Operation Manual - Page 61
    SNMP is usable. (About 5 minutes) • Up to 16 alphanumeric letters and symbols can be used for the community name, user name and password. nSERVICE & SUPPORT (URL INFORMATION) You can display a specific URL in the URL INFORMATION field on the INFORMATION screen when an error occurs in the monitor
  • Sharp PN-L805H | Operation Manual - Page 62
    Operate below functions. • Contrast......... Adjusts the CONTRAST. • Black Level.... Adjusts the BLACK LEVEL. • Colors Adjusts the COLORS. • Sharpness..... Adjusts the SHARPNESS. 4. Operates the menu screen for the monitor. 5. Switches the pages to Tools, Info, Help tab. Tools 1. Display below
  • Sharp PN-L805H | Operation Manual - Page 63
    appropriate applications. In order to use this function, enable a connection to the monitor through the web browser. Read the manual for the terminal software for detailed instructions. (1) Connect the computer to the monitor. 1. Specify the IP address and data port number and connect the computer
  • Sharp PN-L805H | Operation Manual - Page 64
    If you are experiencing any problem with your display, before calling for service, please review the following troubleshooting tips. There is no this monitor? (See pages 68 and 69.) • If the connected device does not support 4K, set HDMI MODES to MODE2. The video from D-sub input terminal does not
  • Sharp PN-L805H | Operation Manual - Page 65
    Troubleshooting The touch panel does not respond. • Is the USB cable connected properly? (Touch pen Management Tool Operation Manual pens that are supplied touch pens or optional PN-ZL06 used? • If your finger is too has a problem. Turn off the monitor and request repair from your SHARP dealer. (
  • Sharp PN-L805H | Operation Manual - Page 66
    Specifications nProduct Specifications Model PN-L805H LCD component 80" Class [80-1/2 inch (204.4cm) diagonal] TFT set to ON: 0.5 W As a part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice.
  • Sharp PN-L805H | Operation Manual - Page 67
    to use a wall-mount bracket that complies with the VESA-compatible mounting method. SHARP recommends using M6 screws and tighten the screws. Note that screw hole depth of to VESA DPMS. Both your video card and computer must support the same standard in order for the monitor's power management
  • Sharp PN-L805H | Operation Manual - Page 68
    has been configured to detect plug-and-play monitors. There are several types of DDC, depending on the communication method used. This monitor supports DDC2B. nCompatible signal timing (PC) Screen resolution VESA 640 × 480 800 × 600 Wide 848 × 480 1024 × 768 1152 × 864 1280 × 768 1280 × 800
  • Sharp PN-L805H | Operation Manual - Page 69
    nCompatible signal timing (AV) Screen resolution 4096 × 2160p 3840 × 2160p 1920 × 1080p 1920 × 1080i 1280 × 720p 720 × 576p 720 × 480p 640 × 480p 720(1440) × 576i 720(1440) × 480i Frequency 24Hz 25Hz 30Hz 50Hz 59.94Hz 60Hz 24Hz 25Hz 30Hz 50Hz 59.94Hz 60Hz 24Hz 50Hz 59.94Hz 60Hz 50Hz 59.94Hz 60Hz
  • Sharp PN-L805H | Operation Manual - Page 70
    Specifications nD-sub input terminal pins (Mini D-sub 15 pin) No. Function No. Function 1 Red video signal input 9 +5V 2 Green video signal input 10 GND 3 Blue video signal input 11 N.C. 4 N.C. 12 DDC data 5 GND 13 Hsync signal input 6 GND for red video signal 14 Vsync signal input 7
  • Sharp PN-L805H | Operation Manual - Page 71
    Mounting Precautions (For SHARP dealers and service engineers) • When installing, removing or moving the monitor upward from the perpendicular in relation to a level surface), consult an authorized SHARP dealer because there are some specific mounting conditions. nAttaching the Tray Tray mount
  • Sharp PN-L805H | Operation Manual - Page 72
    Mounting Precautions (For SHARP dealers and service engineers) nRemoving the Tray Back of the tray (2) (1) Pinch the locking tabs (4 places) nAttaching the speaker covers Speaker cover attachment screws (M3) If you will
  • Sharp PN-L805H | Operation Manual - Page 73
    PN-L805H M EN18C(1)
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
PN-L805H
LCD MONITOR
OPERATION MANUAL