Sharp PN-L851H PN-L651H PN-L751H| PN-L851H Operation Manual
Sharp PN-L851H Manual
View all Sharp PN-L851H manuals
Add to My Manuals
Save this manual to your list of manuals |
Sharp PN-L851H manual content summary:
- Sharp PN-L851H | PN-L651H | PN-L751H| PN-L851H Operation Manual - Page 1
PN-L851H PN-L751H PN-L651H LCD MONITOR OPERATION MANUAL - Sharp PN-L851H | PN-L651H | PN-L751H| PN-L851H Operation Manual - Page 2
IMPORTANT: To aid reporting in case of loss or theft, please record the product's model and serial numbers in the space provided. The numbers are located in the rear of the product. Model No.: Serial No.: U.S.A. ONLY - Sharp PN-L851H | PN-L651H | PN-L751H| PN-L851H Operation Manual - Page 3
user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. WARNING: FCC Regulations and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of - Sharp PN-L851H | PN-L651H | PN-L751H| PN-L851H Operation Manual - Page 4
SHARP LCD product. To ensure safety and many years of trouble service life of your LCD product, please read the following precautions carefully before using the product. 1. Read instructions - All operating instructions must be read and understood before the product is operated. 2. Keep this manual - Sharp PN-L851H | PN-L651H | PN-L751H| PN-L851H Operation Manual - Page 5
or spoil your clothing. In order to avoid these problems, make sure to observe the precautions below: • (-) sides of the batteries according to the instructions in the compartment. • Do not mix old reaction control in nuclear facility, medical life support system, and missile launch control in a - Sharp PN-L851H | PN-L651H | PN-L751H| PN-L851H Operation Manual - Page 6
INSTRUCTIONS with hard objects. - Please understand that SHARP CORPORATION bears no responsibility for errors made during (See the "APPLICATION Mode Reboot" of Software Guide.) - If you or a third party uses malfunctioning. Refer the servicing to the service representative. Manual Scope - Microsoft - Sharp PN-L851H | PN-L651H | PN-L751H| PN-L851H Operation Manual - Page 7
surface. If necessary, the monitor may be tilted up to 20 degrees upward. • When using PN-L851H tilted upward from the perpendicular in relation to a level surface, consult an authorized SHARP dealer because there are some specific mounting conditions. • When moving the monitor, be sure to - Sharp PN-L851H | PN-L651H | PN-L751H| PN-L851H Operation Manual - Page 8
• When using this monitor tilted more than 20 degrees upward from the perpendicular in relation to a level surface, consult an authorized SHARP dealer because there are some specific mounting conditions. Adhere to the following. Failing to adhere to the following may cause malfunctions. - This - Sharp PN-L851H | PN-L651H | PN-L751H| PN-L851H Operation Manual - Page 9
Contents IMPORTANT INFORMATION 3 DEAR SHARP CUSTOMER 4 SAFETY PRECAUTIONS 4 TIPS AND SAFETY INSTRUCTIONS 6 MOUNTING PRECAUTIONS 7 Supplied Components 53 Command-based control 53 Troubleshooting 54 Specifications 56 Mounting Precautions (For SHARP dealers and service engineers 60 9E - Sharp PN-L851H | PN-L651H | PN-L751H| PN-L851H Operation Manual - Page 10
type): 3 Power cord: 1 R03 battery ("AAA" size): 2 CD-ROM (Utility Disk for Windows): 1 SHARP Display Connect License: 1 Setup Manual: 1 Specification sheet Touch pen: 1 (PN-L851H: 2) Eraser: 1 Tray: 1 USB flash drive / SD card cover: 1 Speaker cover: 2 Camera mount - Sharp PN-L851H | PN-L651H | PN-L751H| PN-L851H Operation Manual - Page 11
the TOUCH PANEL2 terminal, change the setting for the terminal used in TOUCH INPUT SELECT in the SETUP menu to TOUCH PANEL2. Caution • Consult your SHARP dealer for attachment/detachment of optional parts. 11 E - Sharp PN-L851H | PN-L651H | PN-L751H| PN-L851H Operation Manual - Page 12
Part Names nRemote control unit 1 2 1. Signal transmitter 2. Operation buttons (See page 26.) E 12 - Sharp PN-L851H | PN-L651H | PN-L751H| PN-L851H Operation Manual - Page 13
connecting/ disconnecting cables. Also, read the manual of the equipment to be connected. • output terminals may cause malfunctions and the other problems. • Do not use any cable that available HDMI cable (conforming to the HDMI standard) that supports 4K. • Select the audio input terminal to be used - Sharp PN-L851H | PN-L651H | PN-L751H| PN-L851H Operation Manual - Page 14
monitor is in input signal waiting mode. • This terminal does not support HDR signals. The output device's screen will not be displayed properly. For details, see the Software Guide. 12. microSD card slot • This is used in APPLICATION mode. For details, see the Software Guide. 13. USB hub (for - Sharp PN-L851H | PN-L651H | PN-L751H| PN-L851H Operation Manual - Page 15
Connecting the Power Cord Caution • Use only the power cord supplied with the monitor. 1. Turn off the main power switch. 2. Plug the power cord (supplied) into the AC input terminal. 3. Plug the power cord (supplied) into the power outlet. Main power switch 1 AC input terminal 2 Power cord ( - Sharp PN-L851H | PN-L651H | PN-L751H| PN-L851H Operation Manual - Page 16
. 16.4 feet (5 m) at an angle of approx 10° from the center to the top/ bottom/right/left of the remote control sensor. 2. See the instructions in the compartment and put in the supplied batteries (R03 ("AAA" size) x 2) with their plus (+) and minus (-) sides oriented correctly. 3. Close the cover - Sharp PN-L851H | PN-L651H | PN-L751H| PN-L851H Operation Manual - Page 17
Removing the Handles The handles can be removed. Handle Handle screws Caution • The removable handles and handle screws are for use with this monitor. Do not use them for any other devices. • To attach handles, be sure to use the handles and handle screws which were removed from this monitor. • - Sharp PN-L851H | PN-L651H | PN-L751H| PN-L851H Operation Manual - Page 18
Attaching the USB flash drive / SD card cover 1. Attach the USB flash drive / SD card cover (supplied) to this monitor. USB flash drive / SD card cover (supplied) TIPS • If the cover will be attached, use a USB flash drive no larger than 2-3/4 inch (70 mm) (L) (excluding the terminal) x 11/16 inch - Sharp PN-L851H | PN-L651H | PN-L751H| PN-L851H Operation Manual - Page 19
Turning Power On/Off Caution • Turn on the monitor first before turning on the computer or playback device. • When switching the main power switch or the POWER button off and back on, always wait for at least 5 seconds. A short interval may result in a malfunction. Turning power on/off Press the - Sharp PN-L851H | PN-L651H | PN-L751H| PN-L851H Operation Manual - Page 20
mode, see the Software Guide. • Be sure to set the date and time. TIPS • When "Select a Home app" screen appears, select "SHARP IWB Launcher", and select contact an authorized SHARP servicing dealer or service center for assistance with internal battery replacement. • Estimated service life of the - Sharp PN-L851H | PN-L651H | PN-L751H| PN-L851H Operation Manual - Page 21
the supplied CD-ROM. To install the software, see the Touch pen Management Tool Operation Manual. Pen tip (thin) Pen tip (thick) The following software recognizes the side of refer to the Pen Software Operation Manual. For details on how to use the touch pen in Direct Drawing for Android, refer - Sharp PN-L851H | PN-L651H | PN-L751H| PN-L851H Operation Manual - Page 22
For details, check operating system Help and the application's support documentation. Double-tap Same action as double-clicking a mouse. using the touch pen in the Pen Software, see the Pen Software Operation Manual. nCommon finger and touch pen actions Single-tap Same action as left-clicking a - Sharp PN-L851H | PN-L651H | PN-L751H| PN-L851H Operation Manual - Page 23
Touch action Drag-and-drop Same action as drag-and-drop with a mouse. Touch the screen with your finger/touch pen and move without lifting. When you have finished the movement, lift your finger/ touch pen. nFinger actions Zoom Use in a screen that is capable of enlargement/reduction. Touch the - Sharp PN-L851H | PN-L651H | PN-L751H| PN-L851H Operation Manual - Page 24
Android. For details on how to use the eraser in Pen Software, see the Pen Software Operation Manual. For details on how to use the eraser in Direct Drawing for Android, see the Software Guide. Caution • When using the eraser, gently bring the cloth side into contact with the screen. Touching the - Sharp PN-L851H | PN-L651H | PN-L751H| PN-L851H Operation Manual - Page 25
Input mode selection Changes the input mode. In APPLICATION mode, you can use Android applications. For details of APPLICATION mode, see the Software Guide. * You can change the input mode by pressing the INPUT button on the remote control unit. Input mode Video Audio APPLICATION APPLICATION - Sharp PN-L851H | PN-L651H | PN-L751H| PN-L851H Operation Manual - Page 26
AM 8 9 10 19 20 INPUT MODE SIZE COLOR MODE BRIGHT VOLUME REMOTE No. MODEL VERSION S/N STATUS TOUCH PANEL : HDMI1 : WIDE : STD : 31 : 15 :0 : PN-L751H : X.X.X.X : XXXXXXXX : 0000-000000-00-0000 : OK 1. HDMI Switch the input mode to HDMI1 or HDMI2. 2. Numeric input buttons 0 to 9 are also used in - Sharp PN-L851H | PN-L651H | PN-L751H| PN-L851H Operation Manual - Page 27
video for a long time. 10. Buttons for operating the HDMI-connected device When HDMI CEC LINK is set to AUTO, you can operate devices that support HDMI CEC in modes other than APPLICATION mode. 11. ID SET Set a number on the remote control unit. (See page 41.) 12. OPTION Switch the - Sharp PN-L851H | PN-L651H | PN-L751H| PN-L851H Operation Manual - Page 28
Basic Operation nSwitching the screen size Even when the screen size is changed, the display may remain the same depending on the input signal. WIDE Displays image so it fills the entire screen. ZOOM NORMAL The image is enlarged to fill the entire screen without changing the aspect ratio. The - Sharp PN-L851H | PN-L651H | PN-L751H| PN-L851H Operation Manual - Page 29
setting, network settings, and other settings in the Software Guide. nExample of operation (Adjusting CONTRAST in the PICTURE menu) 30 BLACK LEVEL 30 TINT 30 COLORS 30 SHARPNESS 12 COLOR ADJUSTMENT ADVANCED RESET D-SUB 4. Press Function not supported by the current input signal) 29 E - Sharp PN-L851H | PN-L651H | PN-L751H| PN-L851H Operation Manual - Page 30
Menu Items Configuring settings in the touch menu You can configure the following settings from the touch menu. You can configure the settings by touch operation. PICTURE CONFIGURE QUADSCREEN OTHERS BRIGHT CONTRAST BLACK LEVEL COLOR MODE SETTING INITIAL SCREEN PRIORITY: AUTO INPUT SEL. SAVE LAST - Sharp PN-L851H | PN-L651H | PN-L751H| PN-L851H Operation Manual - Page 31
Menu Items Menu item details The menu will differ depending on the input mode. nSCREEN You can move the menu screen display position each time the INFORMATION button is pressed. AUTO (D-SUB) The CLOCK, PHASE, H-POS, and V-POS are automatically adjusted. Pressing the ENTER button performs adjustment. - Sharp PN-L851H | PN-L651H | PN-L751H| PN-L851H Operation Manual - Page 32
TINT Adjusts the hue. Selecting + changes the color towards green, and selecting - changes it towards magenta. COLORS Adjusts the color intensity. SHARPNESS Adjusts the sharpness of the image. COLOR ADJUSTMENT COLOR MODE Changes the color mode on the screen. The color mode on the screen can also be - Sharp PN-L851H | PN-L651H | PN-L751H| PN-L851H Operation Manual - Page 33
pattern display. When USER is selected, set each color's level. HDR (HDMI) To play content that supports HDR, select ON and set HDMI MODES to MODE1. If HDMI MODES is set to MODE2, content that supports HDR cannot be played. To make the setting effective, you must restart this monitor. RESET Resets - Sharp PN-L851H | PN-L651H | PN-L751H| PN-L851H Operation Manual - Page 34
decoded using the HDMI input terminal or expansion slot (when you have used the expansion slot to expand the function). MODE1 Normally used. This will support most common color spaces and other encoding signals. MODE2 This should be used for YCbCr 4:2:0 at 4K Vsync 50/60 Hz signals. Also use this - Sharp PN-L851H | PN-L651H | PN-L751H| PN-L851H Operation Manual - Page 35
Menu Items AUDIO SELECT Selects the terminal used to input audio signals in each input mode. AUDIO OPTION SPEAKER SELECT Selects the speaker to be used. AUDIO OUTPUT Sets the volume of sound output from the audio output terminal. VARIABLE1......... You can adjust the volume from the speakers of - Sharp PN-L851H | PN-L651H | PN-L751H| PN-L851H Operation Manual - Page 36
TIMING. For images with black edges, etc., depending on the signal, adjustment may not be possible. In this case select OFF. (Perform manual adjustment of the screen.) TOUCH PANEL TOUCH OUTPUT INVALID DISP. TOUCH OUTPUT INVALID ICON....... Sets whether the TOUCH OUTPUT INVALID icon is displayed when - Sharp PN-L851H | PN-L651H | PN-L751H| PN-L851H Operation Manual - Page 37
Menu Items nMULTI/PIP PIP/PbyP PIP MODES Sets the display method. OFF.......... Displays one screen. PIP........... Displays a sub screen inside a main screen. PbyP......... Displays a main screen and a sub screen in a line. PbyP2...... Displays a main screen which measures 2560 pixels in the - Sharp PN-L851H | PN-L651H | PN-L751H| PN-L851H Operation Manual - Page 38
this function is connected to the expansion slot, you can set the order in OPTION. (If the option does not support this function, "OPTION" will not appear.) Input does not change automatically for terminals without a priority setting. The lower the number, the higher the priority. LOGO - Sharp PN-L851H | PN-L651H | PN-L751H| PN-L851H Operation Manual - Page 39
to MAIN due to the switching of the monitor's input or due to the operation of the HDMI-connected device. • The sub screen does not support HDR signals. Displaying 4 screens 1. Press the TOUCH MENU button, and touch the QUAD- SCREEN ON icon ( ). Or, set CONFIGURE QUAD-SCREEN - QUAD-SCREEN MODE to - Sharp PN-L851H | PN-L651H | PN-L751H| PN-L851H Operation Manual - Page 40
cannot be used. • When quad-screen display is selected, the position 1 screen is output from the DisplayPort output terminal. • Positions 2 to 4 do not support HDR signals. • When quad-screen display is selected, the connected computer cannot be operated by touch. nSCHEDULE You can set the time to - Sharp PN-L851H | PN-L651H | PN-L751H| PN-L851H Operation Manual - Page 41
Menu Items (6) BRIGHT Sets the brightness when changing the screen brightness at a specified time. Caution • Do not switch off the main power after setting the SCHEDULE. • Specify the correct date and time. (See page 34.) SCHEDULE does not function unless the date and time are specified. • Check - Sharp PN-L851H | PN-L651H | PN-L751H| PN-L851H Operation Manual - Page 42
[CD Drive] in [This PC]. 3. Double-click [Adj_uty.exe] in the [Monitor] folder. The adjustment pattern will appear. Adjust the screen automatically or manually. 4. When adjustment is finished, press the [Esc] on the computer's keyboard to quit the adjustment program. 5. Eject the CD-ROM from the CD - Sharp PN-L851H | PN-L651H | PN-L751H| PN-L851H Operation Manual - Page 43
appears, change the setting accordingly. EXTERNAL CONTROLLER INPUT Normally, you do not need to change this setting. When using an optional part, if instruction appears, change the setting accordingly. SIGNAL RESPONSE LEVEL Normally, you do not need to change this setting. Use this option to set the - Sharp PN-L851H | PN-L651H | PN-L751H| PN-L851H Operation Manual - Page 44
reset". Other items are not used. * During processing, do not turn off the power. UPDATE MAIN SOFTWARE Not normally used. Used by service technicians when performing repairs or otherwise. 3. Press the RETURN button to return to the normal screen. TIPS • When both abnormal temperature and hardware - Sharp PN-L851H | PN-L651H | PN-L751H| PN-L851H Operation Manual - Page 45
Controlling the Monitor with a computer (RS-232C) You can control this monitor from a computer via RS-232C (COM port) on the computer. TIPS • To control the monitor via RS-232C, set MONITOR CONTROL SELECT to RS-232C. (When this is done, control via LAN or application is not possible.) Computer - Sharp PN-L851H | PN-L651H | PN-L751H| PN-L851H Operation Manual - Page 46
Controlling the Monitor with a computer (RS-232C) nResponse code format When a command has been executed correctly O K Return code (0DH, 0AH) A response is returned after a command is executed. When a command has not been executed E R R Return code (0DH, 0AH) TIPS • "ERR" is returned when - Sharp PN-L851H | PN-L651H | PN-L751H| PN-L851H Operation Manual - Page 47
Controlling the Monitor with a computer (RS-232C) RS-232C command table How to read the command table Command: Direction: Parameter: Reply: * : Command field (See page 45.) W When the "Parameter" is set in the parameter field (see page 45), the command functions as described under "Control/ - Sharp PN-L851H | PN-L651H | PN-L751H| PN-L851H Operation Manual - Page 48
Controlling the Monitor with a computer (RS-232C) PICTURE menu BRIGHT CONTRAST BLACK LEVEL TINT COLORS SHARPNESS COLOR ADJUSTMENT Function COLOR MODE WHITE BALANCE PRESET Command Direction VLMP WR CONT WR BLVL WR TINT WR COLR WR SHRP WR BMOD WR WHBL - Sharp PN-L851H | PN-L651H | PN-L751H| PN-L851H Operation Manual - Page 49
AUDIO menu TREBLE BASS BALANCE RESET Function Controlling the Monitor with a computer (RS-232C) Command Direction Parameter Reply Control/Response contents * AUTR WR -5-5 -5-5 AUBS WR -5-5 -5-5 ○ AUBL WR -10-10 -10-10 ARST W 3 - SETUP menu Function DATE/TIME SETTING Automatic - Sharp PN-L851H | PN-L651H | PN-L751H| PN-L851H Operation Manual - Page 50
Controlling the Monitor with a computer (RS-232C) Function Command Direction Parameter Reply Control/Response contents * AUDIO SELECT APPLICATION DisplayPort ASAC WR ASDI WR 0-1 0-1 0: APPLICATION, 1: AUDIO 1, 3 1, 3 1: AUDIO, 3: DisplayPort HDMI1 ASHP WR 0-1 0-1 0: HDMI, 1: AUDIO - Sharp PN-L851H | PN-L651H | PN-L751H| PN-L851H Operation Manual - Page 51
Controlling the Monitor with a computer (RS-232C) MULTI/PIP menu Function Command Direction Parameter Reply Control/Response contents * PIP MODES MWIN WR 0-3 0-3 0: OFF, 1: PIP, 2: PbyP, 3: PbyP2 PIP SIZE MPSZ WR 1-64 1-64 PIP POS THE LONGEST DIRECTION MHPS WR 0-100 0-100 THE - Sharp PN-L851H | PN-L651H | PN-L751H| PN-L851H Operation Manual - Page 52
Controlling the Monitor with a computer (RS-232C) Initialization/Functional Restriction Setting (FUNCTION) menu Function Command Direction Parameter Reply Control/Response contents * ALL RESET RSET W 0-1 0: ALL RESET 1, 1: ALL RESET 2 - ADJUSTMENT LOCK ALCK WR 0 0 OFF ● W 1-2 1: - Sharp PN-L851H | PN-L651H | PN-L751H| PN-L851H Operation Manual - Page 53
" in APPLICATION mode. (See Software Guide.) Command-based control You can control the monitor using RS-232C commands (see page 47) via terminal software and other appropriate applications. Read the manual for the terminal software for detailed instructions. (1) Connect the computer to the monitor - Sharp PN-L851H | PN-L651H | PN-L751H| PN-L851H Operation Manual - Page 54
If you are experiencing any problem with your display, before calling for service, please review the following troubleshooting tips. There is no from the HDMI input terminal does not appear properly. • Does the HDMI cable support 4K, and is it HDMI standard compliant? The monitor will not work with - Sharp PN-L851H | PN-L651H | PN-L751H| PN-L851H Operation Manual - Page 55
. Power LED illuminates in blue and orange alternately. "STATUS [xxxx]" appears in the corner of the screen. • Hardware has a problem. Turn off the monitor and request repair from your SHARP dealer. (When STATUS ALERT is set to OSD & LED. This varies depending on the setting.) When "AUTO DIMMING" is - Sharp PN-L851H | PN-L651H | PN-L751H| PN-L851H Operation Manual - Page 56
Specifications nCompatible signal timing (PC) Screen resolution VESA 640 × 480 800 × 600 Wide 848 × 480 1024 × 768 1152 × 864 1280 × 768 1280 × 800 1280 × 960 1280 × 1024 1360 × 768 1400 × 1050 1440 × 900 1600 × 1200 1680 × 1050 1920 × 1200 1280 × 720 1920 × 1080 3840 × 2160 4096 × 2160*1 - Sharp PN-L851H | PN-L651H | PN-L751H| PN-L851H Operation Manual - Page 57
Yes Yes Yes Yes Yes Yes Yes Yes Yes nDDC (plug and play) The monitor supports the VESA DDC (Display Data Channel) standard. DDC is a signal standard for plug exchanged between the two. This function can be used if the computer supports DDC and it has been configured to detect plug-and-play monitors. - Sharp PN-L851H | PN-L651H | PN-L751H| PN-L851H Operation Manual - Page 58
Specifications nChannels that can be used in wireless LAN USA VENEZUELA Standard IEEE802.11b/g/n IEEE802.11ac/a/n CANADA COLOMBIA ECUADOR MEXICO PERU REPUBLIC OF GUATEMALA IEEE802.11b/g/n IEEE802.11ac/a/n Channel 1-13ch 36/40/44/48ch 149/153/157/161/165ch 1-11ch 36/40/44/48ch 149/153/157/161/ - Sharp PN-L851H | PN-L651H | PN-L751H| PN-L851H Operation Manual - Page 59
nHDMI input terminal pins (HDMI Connector) Specifications nD-sub input terminal pins (Mini D-sub 15 pin) No. Function 1 TMDS data 2+ 2 TMDS data 2 shield 3 TMDS data 2- 4 TMDS data 1+ 5 TMDS data 1 shield 6 TMDS data 1- 7 TMDS data 0+ 8 TMDS data 0 shield 9 TMDS data 0- 10 TMDS clock+ - Sharp PN-L851H | PN-L651H | PN-L751H| PN-L851H Operation Manual - Page 60
Mounting Precautions (For SHARP dealers and service engineers) • When installing, removing or moving the monitor, ensure that this is carried out by at least 4 people. (PN-L651H: at least 2 people.) • Be sure to use a wall-mount bracket designed or designated for mounting the monitor. • This monitor - Sharp PN-L851H | PN-L651H | PN-L751H| PN-L851H Operation Manual - Page 61
Mounting Precautions (For SHARP dealers and service engineers) nAttaching the Tray Secure the tray using 5 tray mounting screws (M3x10) (supplied). nAttaching the speaker covers Speaker cover attachment screws (M3x10) (supplied) If you - Sharp PN-L851H | PN-L651H | PN-L751H| PN-L851H Operation Manual - Page 62
PN-L851H-L751H-L651H M EN19B(1)
PN-L851H
PN-L751H
PN-L651H
LCD MONITOR
OPERATION MANUAL