Sharp PN-T321 PN-T321 Operation Manual
Sharp PN-T321 Manual
 |
UPC - 074000047105
View all Sharp PN-T321 manuals
Add to My Manuals
Save this manual to your list of manuals |
Sharp PN-T321 manual content summary:
- Sharp PN-T321 | PN-T321 Operation Manual - Page 1
PN-T321 LCD MONITOR OPERATION MANUAL - Sharp PN-T321 | PN-T321 Operation Manual - Page 2
IMPORTANT: To aid reporting in case of loss or theft, please record the product's model and serial numbers in the space provided. The numbers are located in the rear of the product. Model No.: Serial No.: U.S.A. ONLY - Sharp PN-T321 | PN-T321 Operation Manual - Page 3
user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. WARNING: FCC Regulations and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of - Sharp PN-T321 | PN-T321 Operation Manual - Page 4
SHARP LCD product. To ensure safety and many years of trouble service life of your LCD product, please read the following precautions carefully before using the product. 1. Read instructions - All operating instructions must be read and understood before the product is operated. 2. Keep this manual - Sharp PN-T321 | PN-T321 Operation Manual - Page 5
both the furniture and the monitor to a suitable support. • Not standing the monitors on cloth or other materials placed between the monitor and supporting furniture. • Educating children about the dangers of climbing on furniture to reach the monitor or its controls. Especially for child safety - Sharp PN-T321 | PN-T321 Operation Manual - Page 6
TIPS AND SAFETY INSTRUCTIONS - The TFT color LCD panel used in this monitor is made with the application dark or does not illuminate, contact an authorized Sharp servicing dealer or service center. The Power Cord - Use only the power cord supplied with the monitor. - Do not damage the power cord - Sharp PN-T321 | PN-T321 Operation Manual - Page 7
in vertical orientation. Operation panel Logo - Be careful not to cover the remote control sensor or buttons. • Be sure to use a wall-mount bracket designed or designated for mounting the monitor. • This monitor is designed to be installed on a concrete wall or pillar. Reinforced work might be - Sharp PN-T321 | PN-T321 Operation Manual - Page 8
Display Monitor: 1 Conversion cable (for AV video): 1 USB flash drive cover: 1 Remote control unit: 1 (red/white/yellow) USB flash drive cover screw: 1 (Battery preinstalled) CD-ROM (Utility Disk for Windows): 1 Cover Sharp logo: 1 Cable clamp: 1 Setup Manual: 1 Place - Sharp PN-T321 | PN-T321 Operation Manual - Page 9
nFront view 1 2 3 4 5 nRear view 3 4 1 5 Part Names 1. LCD panel 2. Power LED (See page 13.) 3. Power switch (See page 13.) 4. Input switch (See page 14.) 5. Remote control sensor (See page 12.) TIPS • Use a pointed object such as a pen tip to press the switches at the operation panel. 1. - Sharp PN-T321 | PN-T321 Operation Manual - Page 10
2. POWER button (See page 13.) 3. MUTE button (See page 14.) 4. VOL +/- buttons (See page 14.) BRIGHT +/- buttons (See page 14.) Cursor control ( / / / ) buttons 5. DISPLAY button (See page 14.) 6. MODE button (See page 14.) 7. INPUT button (See page 14.) 8. MENU button (See page 14 - Sharp PN-T321 | PN-T321 Operation Manual - Page 11
connecting/ disconnecting cables. Also, read the manual of the equipment to be connected. • may cause malfunctions and the other problems. TIPS • Images may not AV equipment 1. RS-232C input terminal • You can control the monitor from a PC by connecting a commercially available RS-232 straight - Sharp PN-T321 | PN-T321 Operation Manual - Page 12
Connecting the Power Cord Caution • Do not use a power cord other than the one supplied with the monitor. 1. Turn off the main power switch. 2. Plug the power cord (supplied) into the AC input terminal. 3. Plug the power cord (supplied) into the AC power - Sharp PN-T321 | PN-T321 Operation Manual - Page 13
2. Attach the USB flash drive cover and secure with the provided screw. Insert the claw (1) into the monitor, and while pressing in the direction of (2), insert the claw (3) into the monitor. (3) USB port Screw (3) (black) (1) USB flash drive cover (2) TIPS • If the USB flash drive will be - Sharp PN-T321 | PN-T321 Operation Manual - Page 14
the battery 1. Pull out the battery case. Press the catch on the battery case while pulling out the case. Catch Battery case Remote control sensor 10° 16.4 feet (5 m) 10° 10° 2. Insert the battery. Make sure the polarities (+ and -) of the battery are oriented correctly. Lithium battery - Sharp PN-T321 | PN-T321 Operation Manual - Page 15
wait for at least 5 seconds. A short interval may result in a malfunction. TIPS • If the monitor is in the input signal standby mode and you press the POWER button on the remote control unit, the monitor enters standby mode. Disabling power on/off operations Power on/power off operations can be - Sharp PN-T321 | PN-T321 Operation Manual - Page 16
. * You can select the input terminal by pressing the input switch of the monitor. Input mode DVI-D D-SUB HDMI Video PC/AV DVI-D input terminal PC about 4 seconds if you do not press any buttons. 7. DISPLAY Displays monitor information. When you press this button again, the display disappears. * - Sharp PN-T321 | PN-T321 Operation Manual - Page 17
as the corresponding dots on the screen. TIPS • Using this monitor's screen-size switching functions to compress or expand the screen for case select the optimal screen size using the screen-size switching function of this monitor. With some software, there may be noise or distortion at the edges - Sharp PN-T321 | PN-T321 Operation Manual - Page 18
32 kbps to 320 kbps Sampling frequency: 32kHz, 44.1kHz, 48kHz WMA Bit rate: 32 kbps to 192 kbps Sampling frequency: 32kHz, 44.1kHz, 48kHz (WMA9 files are not supported to "USB Flash Drive Media Tool Operation Manual". • During a slideshow, the remote control or some buttons may not respond when - Sharp PN-T321 | PN-T321 Operation Manual - Page 19
signal, and other data. Does not appear when the input mode is USB. TIPS • Items that cannot be selected appear in gray. (e.g. Function not supported by the current input signal) 4. Press or to adjust the setting. For items that have press . , press , make settings and then 5. Press twice to - Sharp PN-T321 | PN-T321 Operation Manual - Page 20
the color intensity. SHARPNESS (AV signal input) Adjusts the sharpness of the image. NOISE REDUCTION (AV signal input) Reduces noise that mixes with the image. COLOR MODE Changes the color mode on the screen. The color mode on the screen can also be changed using a remote control unit. (See page - Sharp PN-T321 | PN-T321 Operation Manual - Page 21
orientation of the temperature sensor. Change this setting if you change the installation orientation (vertical or horizontal) of the monitor. LANDSCAPE...... horizontal orientation PORTRAIT.......... vertical orientation LANGUAGE Sets the display language for the menu screen. nOPTION COLOR SYSTEM - Sharp PN-T321 | PN-T321 Operation Manual - Page 22
repeat the automatic adjustment two or three times. Try manual adjustment if necessary. nScreen display for adjustment Before making click [Adj_uty.exe] in the [Monitor] folder. The adjustment pattern will appear. Adjust the screen automatically or manually. 4. When adjustment is finished, - Sharp PN-T321 | PN-T321 Operation Manual - Page 23
settings. After initialization, turn the main power switch off and then back on. ADJUSTMENT LOCK You can disable operations on the monitor and the remote control unit that use buttons. OFF ���Enables operation. 1 Disables all operations other than turning power on/off and FUNCTION menu. 2 Only the - Sharp PN-T321 | PN-T321 Operation Manual - Page 24
conditions Set the RS-232C communication settings on the PC to match the monitor's communication settings as follows: Baud rate Data length Parity bit 9600 bps 8 bits None Stop bit 1 bit Flow control None Example: VOLM0030 VOLM 30 * Be sure to input 4 characters for the parameter - Sharp PN-T321 | PN-T321 Operation Manual - Page 25
Controlling the Monitor with a PC (RS-232C) nResponse code format When a command has been executed correctly return WAIT: When one of the following commands is used: RSET, INPS, ASNC, WIDE, POWR When control via RS-232C is locked (to prevent use) using the operation lock function (see page 21) L - Sharp PN-T321 | PN-T321 Operation Manual - Page 26
Controlling the Monitor with a PC (RS-232C) RS-232C command table How to read the command table Command: Direction: Parameter: Reply: *: Command field (See page 22.) W When the "Parameter" is set in the parameter field (see page 22), the command functions as described under "Control/Response - Sharp PN-T321 | PN-T321 Operation Manual - Page 27
Controlling the Monitor with a PC (RS-232C) Others Function SCREEN SIZE (DVI-D, D-SUB) SCREEN SIZE ( temperature sensors are returned in the following forms: [Sensor 1], [Sensor 2], [Sensor 3] This monitor does not have sensors 2 and 3. All return the same value as No sensor 1. Indicates - Sharp PN-T321 | PN-T321 Operation Manual - Page 28
If you are experiencing any problem with your display, before calling for service, please review the following troubleshooting tips. There is no picture or sound. • Is the power cord disconnected? (See page 10.) • Is the main power switch off? (See page 13.) • Is the monitor in standby mode (the - Sharp PN-T321 | PN-T321 Operation Manual - Page 29
Model PN-T321 LCD component 32" Class [31-1/2 inch (80 cm) diagonal] TFT LCD Max. (4.43MHz)/PAL/PAL-60/SECAM Plug and play VESA DDC2B Power management VESA DPMS, DVI DMPM Input terminals Digital HDMI with the optional equipments recommended by SHARP. In such cases, please check - Sharp PN-T321 | PN-T321 Operation Manual - Page 30
mounting the monitor, be sure to use a wall-mount bracket that complies with the VESA-compatible mounting method. SHARP recommends using Monitor Power Management DMPM Monitor ON Active OFF Screen Display No display Power consumption 82 W 10 W nDDC (plug and play) The monitor supports the VESA - Sharp PN-T321 | PN-T321 Operation Manual - Page 31
Specifications nCompatible signal timing (PC) Screen resolution VESA 640 × 480 800 × 600 848 × 480 1024 × 768 1152 × 864*1 1280 × 768 1280 × 800*1 1280 × 960*1 1280 × 1024*1 Wide 1360 × 768 1400 × 1050*1 1440 × 900*1 - Sharp PN-T321 | PN-T321 Operation Manual - Page 32
Specifications nCompatible signal timing (AV) Screen resolution 1920 × 1080p * 1920 × 1080i * 1280 × 720p 720 × 576p 720 × 480p 720(1440) × 576i 720(1440) × 480i Frequency 24Hz 50Hz 59.94Hz 60Hz 50Hz 59.94Hz 60Hz 50Hz 59.94Hz 60Hz 50Hz 59.94Hz 60Hz 50Hz 59.94Hz 60Hz DVI-D - Yes Yes Yes Yes Yes - Sharp PN-T321 | PN-T321 Operation Manual - Page 33
PN-T321 M EN10M(1)
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
 |
 |
PN-T321
LCD MONITOR
OPERATION MANUAL