Sharp PN-U553 Operation Manual

Sharp PN-U553 Manual

Get Sharp PN-U553 PDF manuals and user guides View all Sharp PN-U553 manuals
Add to My Manuals
Save this manual to your list of manuals

Sharp PN-U553 manual content summary:

  • Sharp PN-U553 | Operation Manual - Page 1
    PN-U553 PN-U473 PN-U423 LCD MONITOR OPERATION MANUAL
  • Sharp PN-U553 | Operation Manual - Page 2
    IMPORTANT: To aid reporting in case of loss or theft, please record the product's model and serial numbers in the space provided. The numbers are located in the rear of the product. Model No.: Serial No.: U.S.A. ONLY
  • Sharp PN-U553 | Operation Manual - Page 3
    limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause
  • Sharp PN-U553 | Operation Manual - Page 4
    SHARP LCD product. To ensure safety and many years of trouble service life of your LCD product, please read the following precautions carefully before using the product. 1. Read instructions - All operating instructions must be read and understood before the product is operated. 2. Keep this manual
  • Sharp PN-U553 | Operation Manual - Page 5
    order to avoid these problems, make sure to according to the instructions in the compartment. wall mount brackets recommended by the manufacturer. • Only using furniture that can safely support support. • Not standing the monitors on cloth or other materials placed between the monitor and supporting
  • Sharp PN-U553 | Operation Manual - Page 6
    SAFETY INSTRUCTIONS - of the inside of the monitor from an authorized SHARP servicing dealer or service center. - Images cannot be rotated on this if it is broken or malfunctioning. Refer the servicing to the service representative. Manual Scope - Microsoft, Windows and Internet Explorer are
  • Sharp PN-U553 | Operation Manual - Page 7
    . • Mounting the monitor on the wall requires special expertise and the work must be performed by an authorized SHARP dealer. You should never attempt to for the PN-U473/PN-U423) • Temperature condition may change when using the monitor together with the optional equipments recommended by SHARP. In
  • Sharp PN-U553 | Operation Manual - Page 8
    connect to a LAN 39 Controlling with a PC 41 "Advanced operation" Command-based control.........44 Troubleshooting 45 Specifications 47 Mounting Precautions (For SHARP dealers and service engineers 53 Supplied Components If any component should be missing, please contact your dealer.  Liquid
  • Sharp PN-U553 | Operation Manual - Page 9
    ( ) A commercially available anti-theft lock can be connected. The anti-theft hole is compatible with the Kensington MicroSaver Security System. Caution • Consult your SHARP dealer for attachment/detachment of optional parts. • When lifting or moving the monitor, do not hold by the speakers. 9E
  • Sharp PN-U553 | Operation Manual - Page 10
    Part Names nRemote control unit 1 2 7 3 8 4 9 10 5 11 6 1. Signal transmitter 2. POWER button (See page 16.) 3. MUTE button (See page 18.) 4. VOL +/- buttons (See page 18.) BRIGHT +/- buttons (See page 18.) Cursor control ( / / / ) buttons 5. DISPLAY button (See page 18.) 6. MODE
  • Sharp PN-U553 | Operation Manual - Page 11
    plug from the power outlet before connecting/ disconnecting cables. Also, read the manual of the equipment to be connected. • Be careful not to confuse connected to the input and output terminals may cause malfunctions and the other problems. • Do not use any cable that has a damaged or deformed
  • Sharp PN-U553 | Operation Manual - Page 12
    device. • Outputting HDCP-encrypted video requires an external device which supports HDCP. • This terminal allows the daisy chain connection of up -232 straight cable between these terminals and the PC. • PN-U553/PN-U473/PN-U423 monitors can be connected together in a daisy chain connection. 13
  • Sharp PN-U553 | Operation Manual - Page 13
    Connecting the Power Cord Caution • Use only the power cord supplied with the monitor. 1. Turn off the main power switch. 2. Plug the power cord (supplied) into the AC input terminal. 3. Plug the power cord (supplied) into the AC power outlet. Power cord (Supplied) 3 For power outlet Main power
  • Sharp PN-U553 | Operation Manual - Page 14
    [PN-U553] [PN-U473] Binding Cables The cables connected to the terminals on the rear of the monitor can be fastened with the cable clamp. Attach the cable clamp into the cable clamp attachment on the rear of the monitor and fasten the cables. Cable clamp Cable clamp attachment Cable [PN-U423] E
  • Sharp PN-U553 | Operation Manual - Page 15
    .4 feet (5 m) at an angle of approx 10° from the center to the top/ bottom/right/left of the remote control sensor. 2. See the instructions in the compartment and put in the supplied batteries (R-6 ("AA" size) x 2) with their plus (+) and minus (-) sides oriented correctly. 3. Close the cover. TIPS
  • Sharp PN-U553 | Operation Manual - Page 16
    Turning Power On/Off Caution • Turn on the monitor first before turning on the PC or playback device. Turning on the main power Turning power on/off Press the POWER button or POWER switch to turn the power ON/OFF. Main power switch Power switch Caution • The main power must be turned on/off
  • Sharp PN-U553 | Operation Manual - Page 17
    nDate/time setting • If the time has not been set, such as when the monitor is first turned on, set the date and time in DATE/TIME SETTING of the SETUP menu. Be sure to set the date and time. TIPS • Set the date in "Year/Month/Day" order. • Set the time on a 24-hour basis. • The clock stops if the
  • Sharp PN-U553 | Operation Manual - Page 18
    Basic Operation 1 2 3 4 5 6 7 9 8 10 1. INPUT (Input mode selection) The menu is displayed. Press or to select the input mode, and press ENTER to enter. * You can select the input terminal by pressing the input switch of the monitor. Input mode Video Audio DVI-D DVI-D input terminal
  • Sharp PN-U553 | Operation Manual - Page 19
    Dot or CUSTOM. • The appearance of the original video may change if you select a screen size with a different aspect ratio than the original image (e.g. TV broadcast or video input from external equipment). • When an ordinary non-wide image (4:3) is viewed with the whole screen using the screen-size
  • Sharp PN-U553 | Operation Manual - Page 20
    BRIGHT 31 CONTRAST 50 AUDIO BLACK LEVEL 50 SETUP TINT COLORS MONITOR SHARPNESS 50 COLOR ADJUSTMENT MULTI/PIP ADVANCED OTHERS RESET D-SUB 1 920x1080 Items that cannot be selected appear in gray. (e.g. Function not supported by the current input signal) 4. Press or to adjust the
  • Sharp PN-U553 | Operation Manual - Page 21
    signals changes. For images with black edges, etc., depending on the signal, adjustment may not be possible. In this case select OFF. (Perform manual adjustment of the screen.) CLOCK (D-SUB) Adjusts frequency for sampling clock for applicable video. Adjust when there is flickering in the form of
  • Sharp PN-U553 | Operation Manual - Page 22
    hue. Selecting - changes the color towards green, and selecting + changes it towards magenta. COLORS (HDMI/COMPONENT/VIDEO) Adjusts the color intensity. SHARPNESS Adjusts the sharpness of the image. COLOR ADJUSTMENT COLOR MODE Changes the color mode on the screen. The color mode on the screen can
  • Sharp PN-U553 | Operation Manual - Page 23
    Menu Items nAUDIO TREBLE Adjusts the volume of treble-level sound. BASS Adjusts the volume of bass-level sound. BALANCE Adjusts the balance of the audio sound between right and left. RESET Resets the values of the AUDIO menu items to the factory preset values. Select "ON" and then press . ENTER
  • Sharp PN-U553 | Operation Manual - Page 24
    Menu Items nMONITOR MONITOR Select the installation direction of the monitor. LANDSCAPE............Landscape orientation PORTRAIT Portrait orientation OSD H-POSITION Adjusts the horizontal display position of menu screen. OSD V-POSITION Adjusts the vertical display position of menu screen. STANDBY
  • Sharp PN-U553 | Operation Manual - Page 25
    Menu Items nOTHERS SCREEN MOTION Residual images can be reduced by moving the entire screen vertically and horizontally. Set the time (operating interval) until the screen moves. POWER MANAGEMENT POWER MANAGEMENT determines whether or not to switch modes from no signal to the input signal standby
  • Sharp PN-U553 | Operation Manual - Page 26
    Menu Items nDual screen display You can display two screens simultaneously. Set this function with PIP MODES of PIP/PbyP in the MULTI/ PIP menu. PIP Main screen A sub screen is displayed inside a main screen. Sub screen PbyP Main screen Sub screen A main screen and a sub screen are displayed
  • Sharp PN-U553 | Operation Manual - Page 27
    Menu Items nSCHEDULE You can set the time to switch the monitor on and off. Set this function with SCHEDULE in the SETUP menu. (See page 23.) SCHEDULE D-SUB (1) XXXX / XX / XX XX XX : XX : XX (2) ON - : - (3) OFF - : - (4) INPUT - (5) EVERY DAY MON WED THU SAT SUN TUE FRI EVERY WEEK
  • Sharp PN-U553 | Operation Manual - Page 28
    In Windows XP, open [CD Drive] in [My Computer]. 3. Double-click [Adj_uty.exe]. The adjustment pattern will appear. Adjust the screen automatically or manually. 4. When adjustment is finished, press the [Esc] on the computer's keyboard to quit the adjustment program. 5. Eject the CD-ROM from the CD
  • Sharp PN-U553 | Operation Manual - Page 29
    Initialization (Reset)/Functional Restriction Setting (FUNCTION) You can return the settings to their factory-preset values and restrict operations. 1. Hold SIZE down until "F" appears in the upper left corner of the screen. 2. While "F" appears, press , , , in that order. ▲▲▲ FUNCTION ALL
  • Sharp PN-U553 | Operation Manual - Page 30
    on the monitor. PC To COM port RS-232C input terminal RS-232 straight cable (commercially available) nDaisy chain connection... Advanced operation PN-U553/PN-U473/PN-U423 monitors can be connected together in a daisy chain connection. Connect with RS-232 straight cable between the PC's COM port
  • Sharp PN-U553 | Operation Manual - Page 31
    : 3 ID number: 4 If monitors are connected as shown above, you can execute commands like "Set the volume of the monitor with ID 4 to 20". When designating ID numbers for a set of monitors linked in a daisy chain, you should basically avoid any duplication of ID numbers. ID numbers do not have to
  • Sharp PN-U553 | Operation Manual - Page 32
    Controlling the Monitor with a PC (RS-232C) nCommands for ID control The command examples shown on this page assume the following connection and ID number set up. ID number: 1 ID number: 2 ID number: 3 ID number: 4 IDST..........A monitor receiving this command sets its own ID number in the
  • Sharp PN-U553 | Operation Manual - Page 33
    : VOLM ? ? ? + WAIT 10 001 20 002 30 003 30 004 Volume settings for all monitors are returned. TIPS • If repeater control is used during ID designation (IDSL, IDLK), the ID designation is canceled. 33 E
  • Sharp PN-U553 | Operation Manual - Page 34
    Controlling the Monitor with a PC (RS-232C) RS-232C command table How to read the command table Command: Direction: Parameter: Reply: * : Command field (See page 30.) W When the "Parameter" is set in the parameter field (see page 30), the command functions as described under "Control/Response
  • Sharp PN-U553 | Operation Manual - Page 35
    the Monitor with a PC (RS-232C) PICTURE menu Function BRIGHT CONTRAST BLACK LEVEL TINT (HDMI, COMPONENT, VIDEO) COLORS (HDMI, COMPONENT, VIDEO) SHARPNESS COLOR ADJUSTMENT COLOR MODE WHITE THRU BALANCE PRESET Command Direction VLMP WR CONT WR BLVL WR TINT WR COLR WR SHRP WR BMOD
  • Sharp PN-U553 | Operation Manual - Page 36
    a monitor ID number. This ID number is only effective for the command immediately after this command. 0 Clears the ID number if one has been designated. ID NO. SETTING IDLK W (SUBSEQUENT) 1-26 Sets a monitor ID number. This ID number is effective for the next and all subsequent commands after
  • Sharp PN-U553 | Operation Manual - Page 37
    Controlling the Monitor with a PC (RS-232C) MULTI/PIP menu Function ENLARGE ENLARGE MODE Command Direction ENLG WR EMHV WR Parameter 0-1 11-55 IMAGE POSITION (M x N) EPHV WR BEZEL ADJUST BZCO WR ENLARGE/IMAGE POSITION SETTING ESHV WR PIP MODES MWIN WR PIP SIZE MWSZ WR PIP POS THE
  • Sharp PN-U553 | Operation Manual - Page 38
    Controlling the Monitor with a PC (RS-232C) Others Function VOLUME MUTE TEMPERATURE SENSOR Command Direction VOLM WR MUTE WR DSTA R Parameter 0-31 0-1 TEMPERATURE ACQUISITION ERRT R CAUSE OF LAST STANDBY MODE STCA W 0 R Reply Control/Response contents * 0-31 ○ 0-1 0: OFF, 1: ON -
  • Sharp PN-U553 | Operation Manual - Page 39
    DHCP CLIENT If your LAN has a DHCP server and you wish to obtain an address automatically, change this setting to ON. To set the address manually, set this to OFF. IP ADDRESS If the DHCP CLIENT is set to OFF, specify an IP address. Press or to select items, and press
  • Sharp PN-U553 | Operation Manual - Page 40
    Controlling the Monitor with a PC (LAN) ■ To set from a PC When the monitor is connected to a PC, LAN settings can be configured via PC. Set up process (1) Connect your monitor to a PC (2) Specify the PC's IP address (3) Configure the monitor's LAN settings (1) Connecting your monitor to a PC
  • Sharp PN-U553 | Operation Manual - Page 41
    . DHCP CLIENT If your LAN has a DHCP server and you wish to obtain an address automatically, change this setting to ON. To set the address manually, set this to OFF. IP ADDRESS If the DHCP CLIENT is set to OFF, specify an IP address. SUBNET MASK If the DHCP CLIENT is
  • Sharp PN-U553 | Operation Manual - Page 42
    power on/off. * Make sure that the setting is applied before performing the next step. If clicked repeatedly, the setting may not be properly applied. E 42
  • Sharp PN-U553 | Operation Manual - Page 43
    . DHCP CLIENT If your LAN has a DHCP server and you wish to obtain an address automatically, change this setting to ON. To set the address manually, set this to OFF. IP ADDRESS If the DHCP CLIENT is set to OFF, specify an IP address. SUBNET MASK If the DHCP CLIENT is
  • Sharp PN-U553 | Operation Manual - Page 44
    other appropriate applications. In order to use this function, enable a connection to the monitor through Internet Explorer. Read the manual for the terminal software for detailed instructions. (1) Connect the PC to the monitor. 1. Specify the IP address and data port number and connect the PC to
  • Sharp PN-U553 | Operation Manual - Page 45
    If you are experiencing any problem with your display, before calling for service, please review the following troubleshooting tips. There is no picture or sound. • Is the power cord disconnected? (See page 13.) • Is the main power switch off? (See page 16.) • Is
  • Sharp PN-U553 | Operation Manual - Page 46
    Troubleshooting The Power LED is flashing in red and green alternately. • When the internal temperature of the monitor rises excessively, the brightness of the backlight decreases automatically in order to prevent high-temperature-related problems . Ask SHARP dealer about removing internal dust. E 46
  • Sharp PN-U553 | Operation Manual - Page 47
    PN-U553 PN-U473 PN-U423 LCD component 55" Class [54-5/8 inch 47" Class [46-15/16 (138.8cm) diagonal] inch (119.3cm) TFT LCD diagonal] TFT LCD 42" Class [42 of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement
  • Sharp PN-U553 | Operation Manual - Page 48
    /16 [627] 2-3/16 [55] [PN-U423] 1-1/16 [27] 38-5/16 [973] Opening width (36-3/4 [934]) VESA holes * 7-7/8 [200] 7-7/8 [200] Unit: inch [mm] Opening height (20-3/4 [527]) 7-7/8 [200] 22-1/4 [565] 2-1/4 [57] When mounting the monitor, be sure to use a wall-mount bracket that complies with
  • Sharp PN-U553 | Operation Manual - Page 49
    ON Display Active OFF No display Power consumption* 130 W 130 W 115 W 4.5 W 4.5 W 4.5 W * Values of the PN-U553, PN-U473, and PN-U423 in that order from the top. nDDC (plug and play) The monitor supports the VESA DDC (Display Data Channel) standard. DDC is a signal standard for plug and play
  • Sharp PN-U553 | Operation Manual - Page 50
    Specifications nCompatible signal timing (PC) Screen resolution VESA 640 × 480 800 × 600 848 × 480 1024 × 768 Wide US TEXT Sun 1152 × 864 1280 × 768 1280 × 800 1280 × 960 1280 × 1024 1360 × 768 1400 × 1050 1440 × 900 1600 × 1200* 1680 × 1050 1920 × 1200* 1280 × 720 1920 × 1080 720 × 400 1024
  • Sharp PN-U553 | Operation Manual - Page 51
    nDVI-D input terminal pins (DVI-D 24 pin) Specifications nHDMI input terminal pins (HDMITM Connector) No. Function 1 TMDS data 2- 2 TMDS data 2+ 3 TMDS data 2/4 shield 4 N.C. 5 N.C. 6 DDC clock 7 DDC data 8 N.C. 9 TMDS data 1- 10 TMDS data 1+ 11 TMDS data 1/3 shield 12 N.C. No.
  • Sharp PN-U553 | Operation Manual - Page 52
    Specifications nDVI-D output terminal pins (DVI-D 24 pin) nRS-232C output terminal pins (D-sub 9 pin) No. Function 1 TMDS data 2- 2 TMDS data 2+ 3 TMDS data 2/4 shield 4 N.C. 5 N.C. 6 DDC clock 7 DDC data 8 N.C. 9 TMDS data 1- 10 TMDS data 1+ 11 TMDS data 1/3 shield 12 N.C. No.
  • Sharp PN-U553 | Operation Manual - Page 53
    Mounting Precautions (For SHARP dealers and service engineers) • When installing, removing or moving the monitor, ensure that this is carried out by at least 2 people. • Be sure to use a wall-mount bracket designed or designated for mounting the monitor. • This monitor is designed to be installed
  • Sharp PN-U553 | Operation Manual - Page 54
    PN-U553U473U423 Mu EN13G(1)
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
PN-U553
PN-U473
PN-U423
LCD MONITOR
OPERATION MANUAL