Sharp PN-V551 Operation Manual
Sharp PN-V551 Manual
 |
View all Sharp PN-V551 manuals
Add to My Manuals
Save this manual to your list of manuals |
Sharp PN-V551 manual content summary:
- Sharp PN-V551 | Operation Manual - Page 1
PN-V551 LCD MONITOR OPERATION MANUAL - Sharp PN-V551 | Operation Manual - Page 2
IMPORTANT: To aid reporting in case of loss or theft, please record the product's model and serial numbers in the space provided. The numbers are located in the rear of the product. Model No.: Serial No.: U.S.A. ONLY - Sharp PN-V551 | Operation Manual - Page 3
user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. WARNING: FCC Regulations and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of - Sharp PN-V551 | Operation Manual - Page 4
SHARP LCD product. To ensure safety and many years of trouble service life of your LCD product, please read the following precautions carefully before using the product. 1. Read instructions - All operating instructions must be read and understood before the product is operated. 2. Keep this manual - Sharp PN-V551 | Operation Manual - Page 5
spoil your clothing. In order to avoid these problems, make sure to observe the precautions below: • sides of the batteries according to the instructions in the compartment. • Do not mix reaction control in nuclear facility, medical life support system, and missile launch control in a weapon - Sharp PN-V551 | Operation Manual - Page 6
INSTRUCTIONS malfunctioning. Refer the servicing to the service representative. Manual Scope - Microsoft operation with the remote control unit, the PN-ZR01A control kit (optional) is required. Sharp servicing dealer or service center. Please contact an authorized SHARP servicing dealer or service - Sharp PN-V551 | Operation Manual - Page 7
, removing or moving the monitor. • Mounting the monitor on the wall requires special expertise and the work must be performed by an authorized SHARP dealer. You should never attempt to perform any of this work yourself. Our company will bear no responsibility for accidents or injuries caused by - Sharp PN-V551 | Operation Manual - Page 8
control..........57 Troubleshooting 58 Specifications 60 Mounting Precautions (For SHARP dealers and service engineers 65 Supplied Manual: 1 Remote control sensor box mounting hole concealing sticker: 2 * The remote control unit is supplied with the PN-ZR01A control kit (optional). * SHARP - Sharp PN-V551 | Operation Manual - Page 9
terminal (See page 12.) 28. Audio input terminal (See page 11.) 29. Control kit terminal (See pages 12 and 15.) 2 3 4 5 6 7 8 9 10 11 Caution • Consult your SHARP dealer for attachment/detachment of optional parts. • Do not block the fan cover. 9E - Sharp PN-V551 | Operation Manual - Page 10
9. ENTER button (See page 21.) 10. RETURN button (See page 21.) 11. SIZE button (See page 21.) nRemote control sensor box (Supplied with the PN-ZR01A (optional)) 1 2 4 1. Brightness sensor (Cannot be used with the monitor.) 2. Remote control sensor 3. Connection cable 4. Mounting bracket 3 E 10 - Sharp PN-V551 | Operation Manual - Page 11
before connecting/ disconnecting cables. Also, read the manual of the equipment to be connected. • output terminals may cause malfunctions and the other problems. • Do not use any cable that has HDCP-encrypted video requires an external device which supports HDCP. • This terminal allows the daisy - Sharp PN-V551 | Operation Manual - Page 12
an external device. • Outputting HDCP-encrypted video requires an external device which supports HDCP. • This terminal allows the daisy chain connection of up to 5 Control kit terminal • Connects the remote control sensor box of the PN-ZR01A control kit (optional). (See page 15.) 13. Optional - Sharp PN-V551 | Operation Manual - Page 13
can be aligned and used as a large screen. [Example] Remote control sensor box (Supplied with the PN-ZR01A (optional)) Connection with DisplayPort cable Up to 25 monitors (4 monitors when supporting HDCP) can be connected in a daisy chain. First monitor Second monitor Second monitor Secondary - Sharp PN-V551 | Operation Manual - Page 14
the menu of the monitor to ON, the ID No. will be automatically assigned in order from the primary. (See page 30.) (If you attach PN-ZR01A the control kit (optional), you can perform operation of the monitors with the remote control unit.) E 14 - Sharp PN-V551 | Operation Manual - Page 15
Connecting Peripheral Equipment n Mounting the control kit (optional) on the monitor If performing operation of the monitor with the remote control unit, the PN-ZR01A control kit (optional) is required. • Can perform operation of an arbitrary monitor or all monitors with the remote control unit of - Sharp PN-V551 | Operation Manual - Page 16
Connecting the Power Cord Caution • Use only the power cord supplied with the monitor. 1. Turn off the main power switch. 2. Plug the power cord (supplied) into the AC input terminal. 3. Plug the power cord (supplied) into the AC power outlet. AC input terminal 3 For power outlet 2 Main power - Sharp PN-V551 | Operation Manual - Page 17
Binding Cables The cables connected to the terminals on the rear of the monitor can be fastened with the cable clamp. Insert the cable clamp into the cable clamp attachment on the rear of the monitor and fasten the cables. Cable Cable clamp attachment Cable clamp Cable clamp (insertion type) Cable - Sharp PN-V551 | Operation Manual - Page 18
the top/bottom/right/left of the remote control sensor. Remote control sensor 2. See the instructions in the compartment and put in the batteries (R-6 ("AA" size) x 2) (supplied with the PN-ZR01A (optional)) with their plus (+) and minus (-) sides oriented correctly. 3. Close the cover. TIPS • When - Sharp PN-V551 | Operation Manual - Page 19
Turning Power On/Off Caution • Turn on the monitor first before turning on the PC or playback device. Turning on the main power Turning power on/off Press the POWER button or POWER switch to turn the power ON/OFF. Main power switch Caution • The main power must be turned on/off with the main - Sharp PN-V551 | Operation Manual - Page 20
the power is turned on, the internal battery may be exhausted. Please contact an authorized Sharp servicing dealer or service center for assistance with battery replacement. • Estimated service life of the internal battery: About 5 years (depending on monitor operation) • The initial battery was - Sharp PN-V551 | Operation Manual - Page 21
not press any buttons for about 4 seconds, the BRIGHT menu automatically disappears. 6. ENTER Confirms the setting. Remote control unit buttons This manual assumes that this product will be used with the remote control unit buttons, except where specifically noted. 1. INPUT (Input mode selection - Sharp PN-V551 | Operation Manual - Page 22
MASK DEFAULT GATEWAY MONITOR NAME DATA PORT MAC ADDRESS XXXX/XX/XX XX XX:XX:XX : LAN : OFF : 192.168.150. 2 : 255.255.255. 0 : 0. 0. 0. 0 : PN-V551 : 10008 : XX-XX-XX-XX-XX-XX 1920x1080 V: 60 Hz H: 67.5 kHz The display changes from INFORMATION1 → INFORMATION2 → clear display, and so on every - Sharp PN-V551 | Operation Manual - Page 23
Basic Operation nSwitching the screen size Even when the screen size is changed, the display may remain the same depending on the input signal. WIDE PC input Displays image so it fills the entire screen. ZOOM 1 AV input PC input AV input An image with a 4:3 aspect ratio is stretched to fill - Sharp PN-V551 | Operation Manual - Page 24
Remote Control Mode With the remote control unit it's possible to perform operation of... • The primary monitor • Monitors with a specified ID No. • All primary/secondary monitors It's necessary to specify which type of operation will be performed in advance. 1. If using the remote control unit, - Sharp PN-V551 | Operation Manual - Page 25
31 CONTRAST 30 BLACK LEVEL 30 TINT 30 COLORS 30 SHARPNESS 12 COLOR ADJUSTMENT ADVANCED UNIFORMITY RESET D-SUB[RGB] MODE1 • Items that cannot be selected appear in gray. (e.g. Function not supported by the current input signal) MOVE OSD···[DISPLAY] BACK···[RETURN] 1920x1080 - Sharp PN-V551 | Operation Manual - Page 26
Menu Items Menu item details The menu will differ depending on the input mode. nSCREEN You can move the menu screen display position each time DISPLAY is pressed. AUTO (D-SUB[RGB]/DVI-I (analog)) The CLOCK, PHASE, H-POS, and V-POS are automatically adjusted. ENTER Pressing performs adjustment. Use - Sharp PN-V551 | Operation Manual - Page 27
TINT Adjusts the hue. Selecting + changes the color towards green, and selecting - changes it towards magenta. COLORS Adjusts the color intensity. SHARPNESS Adjusts the sharpness of the image. COLOR ADJUSTMENT COLOR MODE Changes the color mode on the screen. The color mode on the screen can also be - Sharp PN-V551 | Operation Manual - Page 28
Menu Items COLOR ADJUSTMENT GAMMA Selects the gamma. USER sets the gamma to the sent value (see page 41). (In PIP mode, the main side setting is reflected in the image.) FLESH TONE (AV input) Adjust the hue control. When FLESH TONE is set to LOW or HIGH, C.M.S.-HUE/-SATURATION/-VALUE cannot be set. - Sharp PN-V551 | Operation Manual - Page 29
Menu Items nSETUP DATE/TIME SETTING Set the date and time. Press or to select the date and time, and press or to change the numerical values. Set the date in "Month/Day/Year" order. Set the time on a 12-hour basis. (Factory default) DATE/TIME FORMAT Sets the date/time display format. DATE MM/DD/ - Sharp PN-V551 | Operation Manual - Page 30
Menu Items COMMUNICATION SETTING RS-232C/LAN SELECT Selects the method with which to control the monitor from the computer. BAUD RATE Selects the communication speed used for RS-232C communication. LAN SETUP Configures the settings to control the monitor from the computer via LAN. (See page 49.) - Sharp PN-V551 | Operation Manual - Page 31
function in START TIMING. For images with black edges, etc., depending on the signal, adjustment may not be possible. In this case select OFF. (Perform manual adjustment of the screen.) 31 E - Sharp PN-V551 | Operation Manual - Page 32
screen in PbyP2 mode. AUTO OFF Sets the display method when no signals for the sub screen are input in PIP, PbyP, or PbyP2 mode. MANUAL........Displays a main screen and a black sub screen. AUTO Displays the main screen as a full screen. E 32 - Sharp PN-V551 | Operation Manual - Page 33
Menu Items nOTHERS SCREEN MOTION PATTERN Residual images are reduced by moving the screen. OFF SCREEN MOTION function is disabled. PATTERN1.......The whole screen moves vertically and horizontally. PATTERN2.......A black screen spreads from the bottom of the screen and then shrinks to the bottom - Sharp PN-V551 | Operation Manual - Page 34
Menu Items nDual screen display You can display two screens simultaneously. Set this function with PIP MODES of PIP/PbyP in the MULTI/ PIP menu. PIP Main screen A sub screen is displayed inside a main screen. Sub screen PbyP Main screen Sub screen A main screen and a sub screen are displayed - Sharp PN-V551 | Operation Manual - Page 35
Menu Items nSCHEDULE You can set the time to switch the monitor on and off. Set this function with SCHEDULE in the SETUP menu. (See page 29.) SCHEDULE D-SUB[RGB] (2) (3) No. (1) POWER DAY OF THE WEEK (4) (5) TIME INPUT (6) BRIGHT - - - - - - - - - - - - - - - Sharp PN-V551 | Operation Manual - Page 36
CD- ROM drive. 2. Open [CD Drive] in [Computer]. 3. Double-click [Adj_uty.exe]. The adjustment pattern will appear. Adjust the screen automatically or manually. 4. When adjustment is finished, press the [Esc] on the computer's keyboard to quit the adjustment program. 5. Eject the CD-ROM from the CD - Sharp PN-V551 | Operation Manual - Page 37
, RS-232C/LAN SELECT, ID No. SET, BAUD RATE, NETWORK, MAIL, SERVICE & SUPPORT, and SNMP (See page 30, and pages 53 to 56.) ADJUSTMENT LOCK You leave this setting as MONITOR. When using an optional part, if instruction appears, change the setting accordingly. EXTERNAL CONTROLLER INPUT Normally, you do - Sharp PN-V551 | Operation Manual - Page 38
Controlling the Monitor with a PC (RS-232C) You can control this monitor from a PC via RS-232C (COM port) on the PC. You can also connect multiple monitors via a daisy chain by using a PC. By assigning ID numbers to each monitor (see page 39), you can make input mode selection/adjustment or can - Sharp PN-V551 | Operation Manual - Page 39
Controlling the Monitor with a PC (RS-232C) nResponse code format When a command has been executed correctly O K Return code (0DH, 0AH) A response is returned after a command is executed. * If an ID number has been assigned Space (20H) Return code (0DH, 0AH) O K SPC 0 0 1 ID number of - Sharp PN-V551 | Operation Manual - Page 40
Controlling the Monitor with a PC (RS-232C) nCommands for ID control The command examples shown on this page assume the following connection and ID number set up. ID number: 1 ID number: 2 ID number: 3 ID number: 4 IDLK The parameter of this command sets the ID number of the monitor. The monitor - Sharp PN-V551 | Operation Manual - Page 41
Controlling the Monitor with a PC (RS-232C) nRepeater control This system has a function to allow setting of multiple monitors connected in a daisy chain using a single command. This function is called repeater control. You can use Repeater control function without assigning ID numbers. [Example] - Sharp PN-V551 | Operation Manual - Page 42
Controlling the Monitor with a PC (RS-232C) RS-232C command table How to read the command table Command: Direction: Parameter: Reply: * : Command field (See page 38.) W When the "Parameter" is set in the parameter field (see page 38), the command functions as described under "Control/Response - Sharp PN-V551 | Operation Manual - Page 43
RGB], DVI-I(analog)) Z2SP WR 0-1 0-1 0: OFF, 1: ON ○ RESET ARST W 1 - PICTURE menu BRIGHT CONTRAST BLACK LEVEL TINT COLORS SHARPNESS COLOR ADJUSTMENT Function COLOR MODE WHITE THRU BALANCE PRESET USER UNIFORMITY ADJUST R-CONTRAST G-CONTRAST B-CONTRAST R-OFFSET G-OFFSET B-OFFSET - Sharp PN-V551 | Operation Manual - Page 44
Controlling the Monitor with a PC (RS-232C) Function Command Direction Parameter Reply Control/Response contents * ADVANCED AUTO AGIN W 1 When the input mode is D-SUB[RGB], DVI-I (analog). - ANALOG GAIN ANGA WR 0-127 0-127 When the input mode is D-SUB[RGB], DVI-I (analog). ANALOG - Sharp PN-V551 | Operation Manual - Page 45
Controlling the Monitor with a PC (RS-232C) Function ID SETTING ID NO.SETTING ID NO. SETTING (ONCE) Command Direction IDST W R IDSL W ID NO. SETTING IDLK W (SUBSEQUENT) ID CHECK IDCK W ID DISPLAY IDDP W COPY SETTING SETTING COPY CPMD WR VALUE MODE SETTING COPY CPTG WR TARGET - Sharp PN-V551 | Operation Manual - Page 46
Controlling the Monitor with a PC (RS-232C) MULTI/PIP menu Function ENLARGE ENLARGE MODE Command ENLG EMAG EMHV Direction WR WR WR IMAGE POSITION (M x N) EPHV WR IMAGE POSITION (2 x 2) EPOS WR IMAGE POSITION (3 x 3) EPOS WR IMAGE POSITION (4 x 4) EPOS WR IMAGE POSITION (5 x 5) EPOS WR - Sharp PN-V551 | Operation Manual - Page 47
screen) MWPP WR 0-1 0-1 0: POS1, 1: POS2 PbyP2 POS (Sub screen) MW2P WR 0-2 0-2 0: POS1, 1: POS2, 2: POS3 AUTO OFF MOFF WR 0-1 0-1 0: MANUAL, 1: AUTO OTHERS menu Function Command Direction Parameter Reply Control/Response contents * SCREEN MOTION PATTERN SCSV WR 0-4 0-4 0: OFF - Sharp PN-V551 | Operation Manual - Page 48
Controlling the Monitor with a PC (RS-232C) Others Function VOLUME TEMPERATURE SENSOR Command Direction VOLM WR DSTA R Parameter 0-31 Temperature acquisition ERRT R CAUSE OF LAST STANDBY MODE STCA W 0 R Reply Control/Response contents * 0-31 ○ 0 Internal temperature normal 1 - Sharp PN-V551 | Operation Manual - Page 49
can also configure the monitor to send e-mail notification when it has a problem. The connection requires a commercially available LAN cable (UTP cable, Category 5, and then press . ENTER TIPS • When the IP address is set manually, the IP addresses of the monitor connected to the RS-232C output - Sharp PN-V551 | Operation Manual - Page 50
Controlling the Monitor with a PC (LAN) ■ To set from a PC When the monitor is connected to a PC, LAN settings can be configured via PC. Set up process (1) Connect your monitor to a PC (2) Specify the PC's IP address (3) Configure the monitor's LAN settings (1) Connecting your monitor to a PC - Sharp PN-V551 | Operation Manual - Page 51
to obtain an address automatically, change this setting to "ON". To set the address manually, set this to "OFF". IP ADDRESS If the DHCP CLIENT is set to " or similar, click [Refresh]. TIPS • When the IP address is set manually, the IP addresses of the monitor connected to the RS-232C output terminal - Sharp PN-V551 | Operation Manual - Page 52
Controlling the Monitor with a PC (LAN) ■ INFORMATION Information about this monitor appears. ■ ADJUSTMENT You can adjust these settings which are also available on the monitor's menu. • SCREEN (See page 26.) • PICTURE (See pages 27 to 28.) • PICTURE (ADVANCED) (See page 28.) • SETUP (See pages 29 - Sharp PN-V551 | Operation Manual - Page 53
obtain an address automatically, change this setting to ON. To set the address manually, set this to OFF. IP ADDRESS If the DHCP CLIENT is set to OFF box empty and click [Apply]. TIPS • When the IP address is set manually, the IP addresses of the monitor connected to the RS-232C output terminal and - Sharp PN-V551 | Operation Manual - Page 54
Controlling the Monitor with a PC (LAN) ■ NETWORK (GENERAL) This screen allows you to specify the general LAN settings. ■ MAIL (ORIGINATOR) This screen allows you to configure the e-mail sent periodically or when the monitor has an error. The settings depend on the configuration of your LAN. Ask - Sharp PN-V551 | Operation Manual - Page 55
Controlling the Monitor with a PC (LAN) ■ MAIL (RECIPIENT) This screen allows you to specify the recipients of the e-mail sent periodically or when the monitor has an error. ■ MAIL (PERIODICAL) When PERIODICAL for CONDITION of MAIL (RECIPIENT) is checked, set the date and time to send the mail. - Sharp PN-V551 | Operation Manual - Page 56
SNMP is usable. (About 5 minutes) • Up to 16 alphanumeric letters and symbols can be used for the community name, user name and password. ■ SERVICE & SUPPORT (URL INFORMATION) You can display a specific URL in the URL INFORMATION field on the INFORMATION screen when an error occurs in the monitor - Sharp PN-V551 | Operation Manual - Page 57
other appropriate applications. In order to use this function, enable a connection to the monitor through Internet Explorer. Read the manual for the terminal software for detailed instructions. (1) Connect the PC to the monitor. 1. Specify the IP address and data port number and connect the PC to - Sharp PN-V551 | Operation Manual - Page 58
problem with your display, before calling for service, please review the following troubleshooting operation disabled? (See page 37.) • Is the PN-ZR01A (optional) remote control sensor box disconnected? ( Hardware has a problem. Turn off the monitor and request repair from your SHARP dealer. (When - Sharp PN-V551 | Operation Manual - Page 59
the brightness of the backlight decreases automatically in order to prevent high-temperaturerelated problems. When this occurs, "TEMPERATURE" is displayed on the screen and the Power or around the vents. Remove dust if possible. Ask SHARP dealer about removing internal dust. Troubleshooting 59 E - Sharp PN-V551 | Operation Manual - Page 60
Specifications nProduct Specifications Model PN-V551 LCD component 55" Class [54-5/8 inch (138.8cm) diagonal] TFT to LOW POWER: 0.5 W As a part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice - Sharp PN-V551 | Operation Manual - Page 61
use a wall-mount bracket that complies with the VESA-compatible mounting method. SHARP recommends using M6 screws and tighten the screws. Note that screw hole depth and DVI DMPM. Both your video card and computer must support the same standard in order for the monitor's power management function - Sharp PN-V551 | Operation Manual - Page 62
Specifications nCompatible signal timing (PC) Screen resolution VESA 640 × 480 800 × 600 848 × 480 1024 × 768 Wide US TEXT Sun 1152 × 864 1280 × 768 1280 × 800 1280 × 960 1280 × 1024 1360 × 768 1400 × 1050 1440 × 900 1600 × 1200* 1680 × 1050 1920 × 1200* 1280 × 720 1920 × 1080 720 × 400 1024 - Sharp PN-V551 | Operation Manual - Page 63
nDVI-I input terminal pins (DVI-I 29 pin) Specifications nPC/AV HDMI input terminal pins (HDMITM Connector) No. Function 1 TMDS data 2- 2 TMDS data 2+ 3 TMDS data 2/4 shield 4 N.C. 5 N.C. 6 DDC clock 7 DDC data 8 Analog Vsync signal 9 TMDS data 1- 10 TMDS data 1+ 11 TMDS data 1/3 - Sharp PN-V551 | Operation Manual - Page 64
Specifications nDVI-D output terminal pins (DVI-D 24 pin) nRS-232C output terminal pins (D-sub 9 pin) No. Function 1 TMDS data 2- 2 TMDS data 2+ 3 TMDS data 2/4 shield 4 N.C. 5 N.C. 6 DDC clock 7 DDC data 8 N.C. 9 TMDS data 1- 10 TMDS data 1+ 11 TMDS data 1/3 shield 12 N.C. No. - Sharp PN-V551 | Operation Manual - Page 65
Mounting Precautions (For SHARP dealers and service engineers) • When installing, removing or moving the monitor, ensure that this is carried out by at least 2 people. • Be sure to use a wall-mount bracket - Sharp PN-V551 | Operation Manual - Page 66
PN-V551 Mu EN14M(1)
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
 |
 |
PN-V551
LCD MONITOR
OPERATION MANUAL