Sharp XG-C60X XG-C60X Operation Manual

Sharp XG-C60X Manual

Get Sharp XG-C60X PDF manuals and user guides View all Sharp XG-C60X manuals
Add to My Manuals
Save this manual to your list of manuals

Sharp XG-C60X manual content summary:

  • Sharp XG-C60X | XG-C60X Operation Manual - Page 1
    Introduction OPERATION MANUAL MODEL XG-C60X Connections and Setup Basic Operation Easy to Use Functions Appendix LCD PROJECTOR XG-C60X_E_PDF_Hyo1.p65 1 03.8.28, 1:54 PM
  • Sharp XG-C60X | XG-C60X Operation Manual - Page 2
    Number located on the bottom of the projector and retain this information. Before recycling the packaging, please be sure that you have checked the contents of the carton thoroughly against the list of "Supplied accessories" on page 14. Model No.: XG-C60X Serial No.: This equipment complies with
  • Sharp XG-C60X | XG-C60X Operation Manual - Page 3
    USERS IN THE U.K. The mains lead of this product is fitted with a non-rewireable (moulded) plug incorporating a 10A fuse. Should the fuse need to be replaced plug to the mains lead, follow the instructions below: WARNING: THIS APPARATUS MUST BE EARTHED XG-C60X_E_PDF_pii_iv.p65 2 03.9.14, 4:13 PM
  • Sharp XG-C60X | XG-C60X Operation Manual - Page 4
    Chinese) and Korean. Carefully read through the operation instructions before operating the projector. Die mitgelieferte CD-ROM enthält Bedienungsanleitungen in e Coreano. Leia cuidadosamente todas as instruções de operação antes de operar o projetor. XG-C60X_E_PDF_pii_iv.p65 3 03.8.28, 1:55 PM
  • Sharp XG-C60X | XG-C60X Operation Manual - Page 5
    operation manual carefully. Introduction ENGLISH There are two important reasons for prompt warranty registration of your new SHARP Projector, using the REGISTRATION CARD packed with the projector. 1. WARRANTY This is to assure that you immediately receive the full benefit of the parts, service
  • Sharp XG-C60X | XG-C60X Operation Manual - Page 6
    REPLACING THE LAMP. REPLACE WITH SAME SHARP LAMP UNIT TYPE BQC-XGC55X//1 ONLY. UV RADIATION : CAN CAUSE EYE DAMAGE. TURN OFF LAMP BEFORE SERVICING. HIGH PRESSURE LAMP : RISK OF EXPLOSION. POTENTIAL HAZARD OF GLASS PARTICLES IF LAMP HAS RUPTURED. HANDLE WITH CARE. SEE OPERATION MANUAL. PRECAUTIONS
  • Sharp XG-C60X | XG-C60X Operation Manual - Page 7
    consumption and longer lamp life. 2. Simple & Easy Operation • Color coded terminals, automatic signal search and graphical menu system insure easy set-up and configuration. • Frequently used connections and controls are strategically placed for easy access. • Simple lens replacement Using an easy
  • Sharp XG-C60X | XG-C60X Operation Manual - Page 8
    PDF Operation Manuals (Windows, Macintosh 9 Part Names 10 Projector (Front and Top View 10 Projector (Rear View 11 Remote Control (Front View 12 Remote Control (Top View 12 Using the Remote Control 13 Available Range of the Remote Specific Portion Target Color 61 Resetting User-Defined Color
  • Sharp XG-C60X | XG-C60X Operation Manual - Page 9
    the Lamp 85 Replacing the Lamp 85 Removing and Installing the Lamp Unit 86 Resetting the Lamp Timer 87 Connecting Pin Assignments 88 (RS-232C) Specifications and Command Settings 89 Wired Remote Control Terminal Specifications 92 Computer Compatibility Chart 93 Troubleshooting 94 For SHARP
  • Sharp XG-C60X | XG-C60X Operation Manual - Page 10
    servicing. 1. Read Instructions All the safety and operating instructions should be read before the product is operated. 2. Retain Instructions The safety and operating instructions manufacturer's instructions have been the operating instructions. 12. Servicing Do not attempt to service this
  • Sharp XG-C60X | XG-C60X Operation Manual - Page 11
    , be sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or other hazards. 20. Safety Check Upon completion of any service or repairs to this product
  • Sharp XG-C60X | XG-C60X Operation Manual - Page 12
    hazard of glass particles if lamp ruptures. In case of lamp rupture, contact your nearest Sharp Authorized Projector Dealer or Service Center for a replacement. See "Replacing the Lamp" on page 85. Cautions concerning the setup of the projector I For minimal servicing and to maintain high image
  • Sharp XG-C60X | XG-C60X Operation Manual - Page 13
    that you want to view. 6 Double click the installation program and follow the instructions on the screen. For Macintosh: 1 Insert the CD-ROM in the CD-ROM to view. 5 Double click the "C60X" pdf file to access the projector manuals. Note • If the desired pdf file cannot be opened by double clicking
  • Sharp XG-C60X | XG-C60X Operation Manual - Page 14
    on the two buttons of the lens cap and remove it from the lens. 26 Zoom knob 26 Focus ring 80 Intake vent 13 Remote control sensor 81 Air filter/cooling fan (Intake vent) (on the bottom of the projector) -10 XG-C60X_E_PDF_p06_14.p65 10 In this operation manual, the illustration and the screen
  • Sharp XG-C60X | XG-C60X Operation Manual - Page 15
    2 terminal Shared audio input terminal for INPUT 1 and 2. 23 WIRED REMOTE control input terminal 19 INPUT 3 terminal For connecting video equipment. 19 instructions on how to use it to secure the projector. Carrying the projector Before carrying the projector, fully extend the carrying handle. XG-
  • Sharp XG-C60X | XG-C60X Operation Manual - Page 16
    turning off the sound. 59 BREAK TIMER button For displaying the break timer. Remote Control (Top View) Remote control signal transmitters 13 -12 XG-C60X_E_PDF_p06_14.p65 12 23 WIRED R/C JACK For controlling the projector by connecting the remote control to the projector. 03.8.28, 1:56 PM
  • Sharp XG-C60X | XG-C60X Operation Manual - Page 17
    included with this projector may exhaust over a short period, depending on how they are kept. Be sure to replace them as soon as possible with new batteries. • Remove the batteries from the remote control if you will not be using the remote control for a long time. -13 XG-C60X_E_PDF_p06_14.p65 13
  • Sharp XG-C60X | XG-C60X Operation Manual - Page 18
    Quick guide label TLABZA364WJZZ Operation manual (this manual) Optional cable I 3 RCA to 15-pin D-sub cable (9'10'' (3.0 m)) AN-C3CP • This cable may not be available depending on the region. Please check with your nearest Sharp Note Authorized Projector Dealer or Service Center. -14 XG
  • Sharp XG-C60X | XG-C60X Operation Manual - Page 19
    Connections and Setup Connections and Setup XG-C60X_E_PDF_p15_18.p65 15 03.8.28, 1:56 PM
  • Sharp XG-C60X | XG-C60X Operation Manual - Page 20
    connections are made. • Be sure to read the operation manuals of the devices to be connected before making connections. This projector can be connected to: A computer using: I An RGB I A computer RGB cable (commercially available) (See page 23.) -16 XG-C60X_E_PDF_p15_18.p65 16 03.9.14, 4:14 PM
  • Sharp XG-C60X | XG-C60X Operation Manual - Page 21
    Authorized Projector Dealer or Service Center. • Depending on the computer you are using, an image may not be projected unless the signal output setting of the computer is switched to the external output. Refer to the computer operation manual for switching the computer signal output settings. XG
  • Sharp XG-C60X | XG-C60X Operation Manual - Page 22
    to a 15-pin terminal) I This projector is compatible with VESA-standard DDC 1/DDC 2B. The projector and a VESA DDC compatible computer will sure to turn on the projector first and the connected computer last. Note • The DDC "Plug and Play" function of this projector operates only when used in
  • Sharp XG-C60X | XG-C60X Operation Manual - Page 23
    use a commercially available S-video cable to connect the INPUT 4 terminal on the projector and the S-video output terminal on the video equipment. VCR or other audio-visual cable (commercially available) 1 S-video cable (commercially available) XG-C60X_E_PDF_p19_24.p65 19 03.8.28, 1:56 PM -19
  • Sharp XG-C60X | XG-C60X Operation Manual - Page 24
    a ø3.5 mm stereo minijack to RCA audio cable (commercially available). Note • When connecting the projector to the video equipment in this way, select "Component" for "Signal Type" in the stereo minijack to RCA audio cable (commercially available) -20 XG-C60X_E_PDF_p19_24.p65 20 03.9.14, 4:15 PM
  • Sharp XG-C60X | XG-C60X Operation Manual - Page 25
    or other audio components can be connected to the AUDIO OUTPUT terminal. Connect the projector to the amplifier using a ø3.5 mm stereo minijack to RCA audio cable (commercially available minijack to RCA audio cable (commercially available) XG-C60X_E_PDF_p19_24.p65 21 03.8.28, 1:57 PM -21
  • Sharp XG-C60X | XG-C60X Operation Manual - Page 26
    (commercially available). 2 Use the above cables to con- nect the projector and the computer. Note • Do not connect or disconnect an RS-232C terminal is not correctly set up. Refer to the operation manual of the computer for details. • See page 88 for XG-C60X_E_PDF_p19_24.p65 22 03.9.14, 4:16 PM
  • Sharp XG-C60X | XG-C60X Operation Manual - Page 27
    is wired to the projector. To utilize this feature, disconnect the cable from the remote control. WIRED REMOTE control input terminal To WIRED R/C JACK ø3.5 mm stereo or mono minijack cable (commercially available or available as Sharp service part QCNWGA038WJPZ) XG-C60X_E_PDF_p19_24.p65 23 03
  • Sharp XG-C60X | XG-C60X Operation Manual - Page 28
    not work with the following operation systems that do not support USB. • Versions earlier than Windows 95. • Versions earlier than Windows NT4.0. • Versions earlier than Mac OS 8.5. Supplied accessories Computer Remote receiver USB cable Remote receiver USB terminal USB cable 2 Press or while
  • Sharp XG-C60X | XG-C60X Operation Manual - Page 29
    . • Do not hold the lens when lifting or lowering the projector. • When lowering the projector, be careful not to get your finger caught in the area between the adjustment foot and the projector. Up Down HEIGHT ADJUST button Adjustment foot Adjustment feet XG-C60X_E_PDF_p25_32.p65 25 03.8.28
  • Sharp XG-C60X | XG-C60X Operation Manual - Page 30
    Adjusting the Lens The image is focused and adjusted to the desired size using the focus ring or zoom knob on the projector. Focus ring Zoom knob 1 The focus is adjusted by rotat- ing the focus ring. 2 Zooming is adjusted by mov- ing the zoom knob. Zoom out Zoom in -26 XG-C60X_E_PDF_p25_32
  • Sharp XG-C60X | XG-C60X Operation Manual - Page 31
    screen cannot be used with this projector. Three optional lenses from Sharp are also available for specialized application. Contact your local Sharp Authorized Projector Dealer for details on the lens. (Refer to the lens installation manual when attaching a lens.) Throw Distance I The graph below
  • Sharp XG-C60X | XG-C60X Operation Manual - Page 32
    (2.2 m) 40" (102 cm) 32" (81 cm) 24" (61 cm) 6' 1" (1.8 m) 4' 8" (1.4 m) Distance from the lens center to the bottom of the image [H] 17 11 / 16" (45.0 cm) 14 3 / 4" (37.5 cm) 11 13 / 16 distance of the lens center below the bottom of the image. -28 XG-C60X_E_PDF_p25_32.p65 28 03.8.28, 2:07 PM
  • Sharp XG-C60X | XG-C60X Operation Manual - Page 33
    (5.0 m) 40" (102 cm) 32" (81 cm) 24" (61 cm) 15' 5" (4.7 m) 11' (3.4 m) Distance from the lens center to the bottom of the image [H] 17 7 / 8" (45.4 cm) 14 7 / 8" (37.8 cm) 11 59 / 64 distance of the lens center below the bottom of the image. XG-C60X_E_PDF_p25_32.p65 29 03.8.28, 2:08 PM -29
  • Sharp XG-C60X | XG-C60X Operation Manual - Page 34
    [L] Maximum [L1] Minimum [L2] 85' 2" (26.0 m) 54' 2" (16.5 m) Distance from the lens center to the bottom of the image [H] 17 63 / 64" (45.7 cm) 250" (635 cm) 200 (-) sign indicate the distance of the lens center below the bottom of the image. -30 XG-C60X_E_PDF_p25_32.p65 30 03.8.28, 2:08 PM
  • Sharp XG-C60X | XG-C60X Operation Manual - Page 35
    4' 8" (1.4 m) 40" (102 cm) 32" (81 cm) 24" (61 cm) 3'11" (1.2 m) 3' 1" (0.9 m) Distance from the lens center to the bottom of the image [H] 17 3 / 4" (45.1 cm) 14 13 / 16" (37.6 cm) 11 13 / 16" ( of the lens center below the bottom of the image. XG-C60X_E_PDF_p25_32.p65 31 03.8.28, 2:08 PM -31
  • Sharp XG-C60X | XG-C60X Operation Manual - Page 36
    . Ceiling-mount setup I It is recommended that you use the optional Sharp ceiling-mount bracket for this installation. Before mounting the projector, contact your nearest Sharp Authorized Projector Dealer or Service Center to obtain the recommended ceiling-mount bracket (sold separately). • AN
  • Sharp XG-C60X | XG-C60X Operation Manual - Page 37
    Basic Operation Basic Operation XG-C60X_E_PDF_p33_41.p65 33 03.8.28, 2:08 PM
  • Sharp XG-C60X | XG-C60X Operation Manual - Page 38
    , reset the language according to the procedure on page 36. 1 Plug the power cord into the wall outlet. • The power indicator illuminates red, and the projector enters the standby mode. 2 ON Press on the projector or on the remote control. • The power indicator illuminates green. After the lamp
  • Sharp XG-C60X | XG-C60X Operation Manual - Page 39
    on the remote control to adjust the volume. Note • Pressing will lower the volume. Pressing will raise the volume. • On the projector, the volume can be adjusted by pressing or . • , on the projector operate as cursor buttons (\, |) when the menu screen is active. INPUT buttons XG
  • Sharp XG-C60X | XG-C60X Operation Manual - Page 40
    sound back on. Selecting the On-screen Display Language The on-screen display language of the projector can be set to English, German, Spanish, Dutch, French, Italian, Swedish, Portuguese, The desired language will be set as the on-screen display. -36 XG-C60X_E_PDF_p33_41.p65 36 03.8.28, 2:08 PM
  • Sharp XG-C60X | XG-C60X Operation Manual - Page 41
    1 Press STANDBY on the projector or on the remote control, then press that button again while the confirmation message is displayed, to put the projector into the standby mode. STANDBY MENU button ', ", \, | buttons MUTE button Basic Operation XG-C60X_E_PDF_p33_41.p65 37 03.8.28, 2:08 PM -37
  • Sharp XG-C60X | XG-C60X Operation Manual - Page 42
    while adjusting the image. KEYSTONE button ENTER button UNDO button ', ", \, | buttons Normal screen Keystone Correction screen Compresses upper side. Compresses lower side. Test pattern -38 XG-C60X_E_PDF_p33_41.p65 38 03.8.28, 2:08 PM
  • Sharp XG-C60X | XG-C60X Operation Manual - Page 43
    reset the Note image. • The Digital Shift function works with BORDER, STRETCH or SMART STRETCH screen. For details, see page 53. • To access Digital Shift function, press twice. The Digital Shift menu will appear when a compatible 16:9 signal is displayed. Basic Operation XG-C60X_E_PDF_p33_41
  • Sharp XG-C60X | XG-C60X Operation Manual - Page 44
    can be set in the projector. I INPUT 1 / 2 Mode Main menu Picture Page 46 C.M.S. Page 60 Fine Sync Page 48 Sub menu Contrast -30 +30 Bright -30 +30 Color -30 +30 Tint -30 +30 Sharp -30 +30 Red -30 +30 Blue -30 +30 CLR Temp -3 +3 Reset Signal Type Progressive Mode RGB Component
  • Sharp XG-C60X | XG-C60X Operation Manual - Page 45
    Blue None Sharp Custom None Power Save [ON/OFF] Mntr.out/RS232 [ON/OFF] Auto Power Off [ON/OFF] Main menu Options (2) Page 70 Language Page 36 Status Page 78 Sub menu Lamp Life PRJ Mode Keylock Level RS-232C Password Anti-Theft All Reset English Deutsch Español Nederlands Français Italiano
  • Sharp XG-C60X | XG-C60X Operation Manual - Page 46
    screens that allow you to adjust the image and various projector settings. You can operate the menus from the projector or remote control using the following procedure. Menu screen for INPUT \, | buttons MENU button MENU button ', ", \, | buttons -42 XG-C60X_E_PDF_p42_50.p65 42 03.8.28, 2:09 PM
  • Sharp XG-C60X | XG-C60X Operation Manual - Page 47
    displayed. | • Press to return to the previous screen. 4 Press \ or | to adjust the item selected. • The adjustment is stored. 5 Press . • The menu screen will disappear. XG-C60X_E_PDF_p42_50.p65 43 03.8.28, 2:09 PM -43 Basic Operation
  • Sharp XG-C60X | XG-C60X Operation Manual - Page 48
    to the previous screen. • In some menus, select the icon us- ing " ". ENTER button M Menu screen ENTER button ', ", \, | buttons MENU button MENU button ', ", \, | buttons -44 XG-C60X_E_PDF_p42_50.p65 44 Sub menu 03.8.28, 2:09 PM
  • Sharp XG-C60X | XG-C60X Operation Manual - Page 49
    a confirmation message. When setting an item, press \ or | to select "Yes" or "OK" and then press . 7 Press . • The menu will disappear. Sub menu Basic Operation XG-C60X_E_PDF_p42_50.p65 45 03.8.28, 2:09 PM -45
  • Sharp XG-C60X | XG-C60X Operation Manual - Page 50
    mode. • When the signal type in INPUT 1 or 2 has been set to Component, "Sharp" can be adjusted when 480I, 480P, 540P, 580I, 580P, 720P, 1035I or 1080I signals are connected. • To reset all adjustment items, select "Reset" and press . •"Red", "Blue" and "CLR Temp" cannot be adjusted when "Color
  • Sharp XG-C60X | XG-C60X Operation Manual - Page 51
    source is a digital video recording with the original encoded as is at 24 frames/second. The projector can convert this film source to progressive video at 60 frames/second with NTSC and PAL60Hz or Film Mode, when the film source has been entered. XG-C60X_E_PDF_p42_50.p65 47 03.8.28, 2:09 PM -47
  • Sharp XG-C60X | XG-C60X Operation Manual - Page 52
    , see pages 42 to 45. Note • Computer image adjustments can be made easily by pressing . See page 50 for details. Saving Adjustment Settings This projector allows you to store up to seven adjustment settings for use with various computers. Select "Save Setting" in the "Fine Sync" menu on the menu
  • Sharp XG-C60X | XG-C60X Operation Manual - Page 53
    stored in the projector can be easily accessed setting with "Select Setting", you can set the projector in the stored adjustments. Basic Operation Special Mode menu screen, see pages 42 to 45. Note • The projector will display the number of scanned lines available from audio-visual equipment such
  • Sharp XG-C60X | XG-C60X Operation Manual - Page 54
    ": • Auto Sync adjustment will occur when the projector is turned on or when the inputs are switched, when connected to a computer. Manual adjustments should be performed: • When the optimum ..... The computer image being ad- justed is displayed. -50 XG-C60X_E_PDF_p42_50.p65 50 03.8.28, 2:09 PM
  • Sharp XG-C60X | XG-C60X Operation Manual - Page 55
    Easy to Use Functions Easy to Use Functions XG-C60X_E_PDF_p51_59.p65 51 03.8.28, 2:10 PM
  • Sharp XG-C60X | XG-C60X Operation Manual - Page 56
    aspect ratio. signal of the image. Resolution lower than XGA 4:3 aspect ratio XGA 4:3 aspect ratio Resolution higher than XGA 4:3 aspect ratio SXGA (1280 × 1024) -52 XG-C60X_E_PDF_p51_59.p65 52 03.8.28, 2:10 PM
  • Sharp XG-C60X | XG-C60X Operation Manual - Page 57
    Letter box Squeeze 540P 16:9 aspect ratio 16:9 aspect ratio (4:3 aspect ratio in 16:9 screen) 720P, 1035I, 1080I 16:9 aspect ratio Easy to Use Functions XG-C60X_E_PDF_p51_59.p65 53 03.8.28, 2:10 PM -53
  • Sharp XG-C60X | XG-C60X Operation Manual - Page 58
    projected image is frozen. FREEZE button "On-screen Display 2 Press again to return to the moving image from the cur- rently connected device. 54 -54 XG-C60X_E_PDF_p51_59.p65 54 03.8.28, 2:10 PM
  • Sharp XG-C60X | XG-C60X Operation Manual - Page 59
    Portion of an Image This function allows you to enlarge a specific portion of an image. This is useful when you want to display a detailed portion change. ',",\,| buttons ENLARGE (Enlarge/ Reduce) buttons "On-screen Display Easy to Use Functions XG-C60X_E_PDF_p51_59.p65 55 03.8.28, 2:10 PM -55
  • Sharp XG-C60X | XG-C60X Operation Manual - Page 60
    for a more exciting theater experience. Allows you to adjust gamma value using Sharp Advanced Presentation Software. Adjusting Gamma Correction 1 Press . • Each time is sRGB". UNDO button GAMMA button STANDARD CUSTOM PRESENTATION CINEMA 56 -56 XG-C60X_E_PDF_p51_59.p65 56 03.8.28, 2:10 PM
  • Sharp XG-C60X | XG-C60X Operation Manual - Page 61
    from INPUT 1 or 2. Displaying the Inset Picture 1 Press . 2 Press or on the remote control or on the projector to switch the image in the inset picture . 3 Press ', ", \ and | to buttons PinP button INPUT 3/4 buttons Easy to Use Functions XG-C60X_E_PDF_p51_59.p65 57 03.8.28, 2:10 PM -57
  • Sharp XG-C60X | XG-C60X Operation Manual - Page 62
    black and "BLACK SCREEN" is displayed on the screen. 2 To return to the original projected image, press again. " Projected Image BLACK SCREEN button 58 -58 XG-C60X_E_PDF_p51_59.p65 58 03.8.28, 2:10 PM
  • Sharp XG-C60X | XG-C60X Operation Manual - Page 63
    the break timer. When no input signal is detected for more than 15 minutes, the projector will automatically enter the standby mode if the break timer has elapsed. • The break buttons BREAK TIMER button "On-screen Display Easy to Use Functions XG-C60X_E_PDF_p51_59.p65 59 03.8.28, 2:10 PM -59
  • Sharp XG-C60X | XG-C60X Operation Manual - Page 64
    in the "C.M.S." menu on the menu screen. ➝ For operating the menu screen, see pages 42 to 45. -60 XG-C60X_E_PDF_p60_66.p65 60 Selected item Standard Custom 1-3 sRGB Description Sharp default setting "Lightness", "Chroma" and "Hue" can be adjusted for each of the six colors. The mode changes to
  • Sharp XG-C60X | XG-C60X Operation Manual - Page 65
    Target Color Select "Hue" in the "C.M.S." menu on the menu screen. ➝ For operating the menu screen, see pages 42 to 45. Easy to Use Functions XG-C60X_E_PDF_p60_66.p65 61 03.8.28, 2:26 PM -61
  • Sharp XG-C60X | XG-C60X Operation Manual - Page 66
    Color Management System (C.M.S.) Resetting User-Defined Color Settings Select "Reset (This Color)" or "Reset (All Colors)" in the "C.M.S." menu on the menu screen. ➝ For operating the menu screen, see pages 42 to 45. Selected item Reset (This Color) Reset (All Colors) Description "Lightness", "
  • Sharp XG-C60X | XG-C60X Operation Manual - Page 67
    vary in strength with the volume level of the source projector. Audio output that varies in strength with the volume level of the source projector. Setting the Audio Output Type Select "Audio Out" operating the menu screen, see pages 42 to 45. XG-C60X_E_PDF_p60_66.p65 63 03.8.28, 2:26 PM -63
  • Sharp XG-C60X | XG-C60X Operation Manual - Page 68
    signals are being received, when turning on the projector or pressing on the projector. • OFF For switching input modes manually in order by pressing on the projector. • To stop searching for the input mode, press on the projector, or , , or on the remote control. Info • Even while this function is
  • Sharp XG-C60X | XG-C60X Operation Manual - Page 69
    On-screen Displays are not displayed. (except Menu, On-Screen Displays displayed when the KEYSTONE button is pressed, and warning displays (Temp./Change The Lamp., etc.)) Turning Off the On-screen Display Select "OSD Display" in the "Options (1)" menu on the menu screen. ➝ For operating the menu
  • Sharp XG-C60X | XG-C60X Operation Manual - Page 70
    to PAL video equipment. When connected to SECAM video equipment. When reproducing NTSC signals in PAL video equipment. When connected to NTSC video equipment. -66 XG-C60X_E_PDF_p60_66.p65 66 03.8.28, 2:26 PM
  • Sharp XG-C60X | XG-C60X Operation Manual - Page 71
    Saving Projected Images • This projector allows you to capture projected images (RGB signals) and set them as a startup image, or function. Deleting the Captured Image 1 Select " Delete" and press . 2 1 Press \ or | to select "OK". 2 Press . XG-C60X_E_PDF_p67_70.p65 67 03.8.28, 2:26 PM -67
  • Sharp XG-C60X | XG-C60X Operation Manual - Page 72
    displayed when no signal is being sent to the projector. Selected Item Description Sharp SHARP default image Custom *1 User customized image (e.g. company logo) Blue Blue screen None . • A "Custom" image is preset as a black screen. 68 -68 XG-C60X_E_PDF_p67_70.p65 68 03.8.28, 2:27 PM
  • Sharp XG-C60X | XG-C60X Operation Manual - Page 73
    screen, see pages 42 to 45. Note • Although lamp life and noise are improved when "Power Save" is Monitor Out/RS-232C Off Function This projector consumes power when using a monitor connected to "ON" when using the Sharp Advanced Presentation Software. XG-C60X_E_PDF_p67_70.p65 69 Status ON (Low
  • Sharp XG-C60X | XG-C60X Operation Manual - Page 74
    lamp be changed when the remaining lamp life becomes 5%. For lamp replacement, contact your nearest Sharp Authorized Projector Dealer or Service Center switched "ON" and "OFF" (see page 69). -70 -70 XG-C60X_E_PDF_p67_70.p65 70 Remaining Lamp Life (Percentage) Used with only "ON" on "Power Save"
  • Sharp XG-C60X | XG-C60X Operation Manual - Page 75
    on the projector are unavailable. Setting up the Keylock Select "Keylock Level" in the "Options (2)" menu on the menu screen. ➝ For operating the menu screen, see pages 42 to 45. Note • If a password has been set, the password input box will be displayed when selecting the "Keylock Level". -71 XG
  • Sharp XG-C60X | XG-C60X Operation Manual - Page 76
    , and "RS- 232C" is selected, the password input box will be displayed. • Make sure that both the projector and computer are set for the same baud rate. Refer to the computer's operation manual for instructions for setting the computer's baud rate. -72 XG-C60X_E_PDF_p71_78.p65 72 03.8.28, 2:27 PM
  • Sharp XG-C60X | XG-C60X Operation Manual - Page 77
    Setting up a Password A password can be set by the user to prevent adjustments to certain settings on the "Options (2)" menu. password to change "PRJ Mode", "Keylock Level", "RS232C", "Anti-Theft" and "All Reset" settings. Easy to Use Functions XG-C60X_E_PDF_p71_78.p65 73 03.8.28, 2:27 PM -73
  • Sharp XG-C60X | XG-C60X Operation Manual - Page 78
    . If You Forget Your Password If you forget the password, delete it and set a new password using the following procedure. ON ON Press ON -74 XG-C60X_E_PDF_p71_78.p65 74 03.8.28, 2:27 PM
  • Sharp XG-C60X | XG-C60X Operation Manual - Page 79
    to contact your nearest Sharp Authorized Projector Dealer or Service Center (see page 96). You may need to bring your projector to them to restore the projector to original factory condition (password and keycode reset). 1 Press any button you like on the remote control or projector to set the first
  • Sharp XG-C60X | XG-C60X Operation Manual - Page 80
    ". 2 Press any button you like on the remote control or the projector to enter the new keycode. 3 Enter the same 4-digit keycode in "Reconfirm". Note • If you do not want to set a keycode, leave the keycode field blank in steps 2 and 3 and press . -76 XG-C60X_E_PDF_p71_78.p65 76 03.8.28, 2:28 PM
  • Sharp XG-C60X | XG-C60X Operation Manual - Page 81
    initialize the settings you have made in the projector. Returning to the Default Settings Select "All Reset" in the "Options (2)" menu on the • Signal Info • Options • Lamp Life • Anti-Theft • Language • Image stored using "Image Capture" Easy to Use Functions XG-C60X_E_PDF_p71_78.p65 77 03.8.28,
  • Sharp XG-C60X | XG-C60X Operation Manual - Page 82
    of All Menu Settings Select the "Status" menu on the menu screen and press . ➝ For operating the menu screen, see pages 42 to 45. -78 XG-C60X_E_PDF_p71_78.p65 78 03.8.28, 2:28 PM
  • Sharp XG-C60X | XG-C60X Operation Manual - Page 83
    Appendix Appendix XG-C60X_E_PDF_p79_93.p65 79 03.8.28, 2:28 PM
  • Sharp XG-C60X | XG-C60X Operation Manual - Page 84
    of the agents in the plastic may cause damage to the quality or finish of the projector. Cleaning the lens I Use a commercially available blower or lens cleaning paper (for glasses and camera lenses) for cleaning the lens. Do not use any liquid type cleaning agents, as they may wear off the coating
  • Sharp XG-C60X | XG-C60X Operation Manual - Page 85
    nearest Sharp Authorized Projector Dealer or Service Center to exchange the filter (PFILDA005WJZZ) when it is no longer possible to clean. M4 M4 M4 M4 Air filter (not removable) Air filter STANDBY button Cleaning and replacing the bottom air filter 1 Press STANDBY on the projector or on the remote
  • Sharp XG-C60X | XG-C60X Operation Manual - Page 86
    filter and cover with a vacuum cleaner extension hose. 6 Replace the air filter. • Place the air filter underneath the tabs on the filter cover. 7 Replace the filter cover. • Slide the filter cover in the with a vacuum cleaner extension hose. -82 XG-C60X_E_PDF_p79_93.p65 82 03.8.28, 2:28 PM
  • Sharp XG-C60X | XG-C60X Operation Manual - Page 87
    becomes 5% or under. • Burnt-out lamp • Lamp circuit failure • Carefully replace the lamp. (See page 86) • Take the projector to your nearest Sharp Authorized Projector Dealer or Service Center (see page 96) for repair. • Please exercise care when replacing the lamp. Power Green on/ indicator Red
  • Sharp XG-C60X | XG-C60X Operation Manual - Page 88
    to power outage or some other cause while using the projector, and the power supply recovers immediately after that, the lamp indicator will illuminate in red and the lamp may not be lit. In this case, unplug the power cord from the AC outlet, replace the power cord in the AC outlet and then
  • Sharp XG-C60X | XG-C60X Operation Manual - Page 89
    replacement, take your projector to the nearest Sharp Authorized Projector Dealer or Service Center for repair. Purchase a replacement lamp unit of type BQCXGC55X//1 from your nearest Sharp Authorized Projector Dealer or Service Center. Then carefully change the lamp by following the instructions
  • Sharp XG-C60X | XG-C60X Operation Manual - Page 90
    not loosen other screws except for the lamp unit cover and lamp unit. (Only the silver screws are loosened). • Please refer to the installation manual included with the lamp unit. 1 Press STANDBY on the projector or on the remote control to put the projector into the standby mode. • Wait until the
  • Sharp XG-C60X | XG-C60X Operation Manual - Page 91
    cover are not correctly installed, the power will not turn on, even if the power cord is connected to the projector. Securing screw User service screw Resetting the Lamp Timer Reset the lamp timer after replacing the lamp. 1 Connect the power cord. • Plug the power cord into the AC socket of the
  • Sharp XG-C60X | XG-C60X Operation Manual - Page 92
    circuit Not connected Note • Pin 8(CS) and Pin 7(RS) are short circuited inside the projector. RS-232C Cable recommended connection: 9-pin D-sub female connector 5 1 96 Pin No. 1 device (e.g. PC). Projector Pin No. 4 5 6 PC Pin No. 4 5 6 -88 XG-C60X_E_PDF_p79_93.p65 88 03.8.28, 2:29 PM
  • Sharp XG-C60X | XG-C60X Operation Manual - Page 93
    projector is verified. • To conserve power in STANDBY mode, the CPU in this model problems. • When the projector REMOTE CONTROL KEY STANDBY P O W R _ _ _ 0 OK OR ERR BLACK SCREEN OFF I M B K _ _ _ 0 OK OR ERR POWER STATUS P O W R ? ? ? ? 0:OFF, 1:ON INPUT 1 I R G B _ _ _ 1 OK OR ERR LAMP
  • Sharp XG-C60X | XG-C60X Operation Manual - Page 94
    Specifications and Command Settings BUTTONS & REMOTE INPUT 1 SHARP (-30 - +30) INPUT 1 CLR TEMP (-3 - +3) INPUT 1 DISPLAY INPUT 1 ADJUSTMENT RESET INPUT ERR A A D J _ _ _ 2 OK OR ERR I M A S _ _ _ 1 OK OR ERR I M A S _ _ _ 0 OK OR ERR PICTURE -90 XG-C60X_E_PDF_p79_93.p65 90 03.8.28, 2:29 PM
  • Sharp XG-C60X | XG-C60X Operation Manual - Page 95
    OR ERR LANGUAGE OPTIONS (2) CONTROL CONTENTS LAMP LIFE (PERCENTAGE) LAMP STATUS PRJ MODE : REVERSE OFF MODEL NAME CHECK SERIAL NO. CHECK *2 PROJECTOR NAME SETTING 1 (First four characters) PROJECTOR NAME SETTING 2 (Middle four characters) PROJECTOR NAME SETTING 3 (Last four characters) PROJECTOR
  • Sharp XG-C60X | XG-C60X Operation Manual - Page 96
    Remote Control Terminal Specifications Specifications of wired remote indicating "Front" and "01" indicating "Rear". Sharp remote control signal format Transmission format: 15-bit format D 1 1 1 1 1 0 1 D to D Common Data Bit Reverse in D -92 XG-C60X_E_PDF_p79_93.p65 92 03.8.28, 2:29 PM
  • Sharp XG-C60X | XG-C60X Operation Manual - Page 97
    However, this projector supports other signals LCD display on the notebook computer and output the display data in "CRT only" mode. Details on how to change display modes can be found in your notebook computer's operation manual. • When this projector XG-C60X_E_PDF_p79_93.p65 93 03.8.28, 2:29 PM
  • Sharp XG-C60X | XG-C60X Operation Manual - Page 98
    Troubleshooting Problem No picture and no sound or projector does not start. Check • Projector power cord is not plugged into the wall outlet. • Power to the external connected devices is off. • The selected input mode is wrong. • Cables incorrectly connected to rear panel of the projector. •
  • Sharp XG-C60X | XG-C60X Operation Manual - Page 99
    • Change the input signal type setting. • The lamp indicator is blinking in red. Replace the lamp. • Picture adjustments are incorrectly set. The VOLUME buttons do not work when: (try the VOL+/- on the remote control) • when the menu is displayed • when the lens menu is displayed • when Pict in Pict
  • Sharp XG-C60X | XG-C60X Operation Manual - Page 100
    If you encounter any problems during setup or operation of this projector, first refer to the "Troubleshooting" section on pages 94 and 95. If this operation manual does not answer your question, please contact the SHARP Service departments listed below. U.S.A. Sharp Electronics Corporation 1-888
  • Sharp XG-C60X | XG-C60X Operation Manual - Page 101
    cm), Remote receiver, Extra air filter, Lens cap (attached), Projector manual and technical reference CD-ROM, Sharp Advanced Presentation Software CD-ROM, Sharp Advanced Presentation Software quick installation guide, Quick guide label, Operation manual Replacement parts Lamp unit (Lamp/cage module
  • Sharp XG-C60X | XG-C60X Operation Manual - Page 102
    3/16 (5.2) 1/16 (1.5) Front View 3 15/16 (99) 2 1/8 1 3/4 (54.5) (44.5) 9/16 (15) 4 15/16 (124.5) 5/16 (7.5) Bottom View 4 1/8 (104) -98 XG-C60X_E_PDF_p94_101.p65 98 15 3/8 (390) 5 (126.5) 1/16 (1.5) 3 1/8 (80) ø 67.5 9 1/2 (241.5) 3 15/16 (100.5) 4 3/8 (111.75) 2 15/16 (75) 2 11
  • Sharp XG-C60X | XG-C60X Operation Manual - Page 103
    of image input to the projector. Decrease the color temperature projector is set up at an angle, smoothens out jaggies on keystone images and compresses the image not only horizontally but vertically keeping the 4:3 aspect ratio. Notevision the color changes according to LCD features, so that the
  • Sharp XG-C60X | XG-C60X Operation Manual - Page 104
    the Lens 26 Adjusting the Picture 46 Adjustment buttons 42 Adjustment feet 25 Air filter 81 All Reset Remote control 12 Remote control sensor 13 Remote receiver 24 Replacing the lamp 85 RESIZE button 52 Reversing/Inverting Projected Images 71 RGB cable 17 RS-232C terminal 22 -100 XG
  • Sharp XG-C60X | XG-C60X Operation Manual - Page 105
    14 Target 60 Temperature warning indicator 83 UNDO button 39 USB cable 24 VAO 63 Video System 66 VOLUME buttons 35 WIRED R/C JACK 23 WIRED REMOTE control input terminal 23 Zoom knob 26 Appendix XG-C60X_E_PDF_p94_101.p65 101 03.8.28, 2:30 PM -101
  • Sharp XG-C60X | XG-C60X Operation Manual - Page 106
    SHARP CORPORATION XG-C60X_E_PDF_Hyo4.p65 1 03.8.28, 1:55 PM
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
LCD PROJECTOR
MODEL
XG-C60X
OPERATION MANUAL
Introduction
Connections and Setup
Basic Operation
Easy to Use Functions
Appendix
XG-C60X_E_PDF_Hyo1.p65
03.8.28, 1:54 PM
1