Sharp XG-F315X XG-F315X Operation Manual

Sharp XG-F315X Manual

Get Sharp XG-F315X PDF manuals and user guides View all Sharp XG-F315X manuals
Add to My Manuals
Save this manual to your list of manuals

Sharp XG-F315X manual content summary:

  • Sharp XG-F315X | XG-F315X Operation Manual - Page 1
    DATA PROJECTOR MODEL XG-F315X OPERATION MANUAL Introduction Quick Start Setup Connections Basic Operation Useful Features Appendix
  • Sharp XG-F315X | XG-F315X Operation Manual - Page 2
    IMPORTANT • For your assistance in reporting the loss or theft of your Projector, please record the Model and Serial Number located on the bottom of the projector and retain this information. • Before recycling the packaging, please ensure that you have checked the contents of the carton thoroughly
  • Sharp XG-F315X | XG-F315X Operation Manual - Page 3
    -rewireable (moulded) plug incorporating a 10A fuse. Should the fuse need to be replaced, a BSI or ASTA approved BS 1362 fuse marked or and of the same . To fit an appropriate plug to the mains lead, follow the instructions below: WARNING: THIS APPARATUS MUST BE EARTHED. IMPORTANT: The wires
  • Sharp XG-F315X | XG-F315X Operation Manual - Page 4
    , German, French, Swedish, Spanish, Italian, Dutch, Portuguese, Chinese and Korean. Carefully read through the operation instructions before operating the projector. Die mitgelieferte CD-ROM enthält Bedienungsanleitungen in Englisch, Deutsch, Französisch, Schwedisch, Spanisch, Italienisch, Niederl
  • Sharp XG-F315X | XG-F315X Operation Manual - Page 5
    operation manual carefully. Introduction ENGLISH There are two important reasons for prompt warranty registration of your new SHARP Projector, using the REGISTRATION CARD packed with the projector. 1. WARRANTY This is to assure that you immediately receive the full benefit of the parts, service
  • Sharp XG-F315X | XG-F315X Operation Manual - Page 6
    and, if not installed and used in accordance with the operation manual, may cause harmful interference to radio communications. Operation of this www.eiae.org. Caution Concerning Lamp Replacement See "Replacing the Lamp" on page 57. This SHARP projector uses a DLP® chip. This very sophisticated
  • Sharp XG-F315X | XG-F315X Operation Manual - Page 7
    . • In this operation manual, the illustration and the CLR Temp BrilliantColorTM C.M.S. Setting C.M.S. Lamp Setting Reset PRJ Net. Help projector. Note .........Indicates additional information for setting up and operating the projector. For Future Reference Maintenance P. 52 Troubleshooting
  • Sharp XG-F315X | XG-F315X Operation Manual - Page 8
    Manual .... 3 Contents 4 IMPORTANT SAFEGUARDS 6 How to Access the PDF Operation Manuals 10 Accessories 11 Part Names and Functions 12 Projector Projector 18 Setting up the Projector 18 Standard Setup (Front Projection) ....... 18 Ceiling-mount 43 Lamp Setting 43 Adjusting the Projector Image
  • Sharp XG-F315X | XG-F315X Operation Manual - Page 9
    55 Regarding the Lamp 57 Lamp 57 Caution Concerning the Lamp 57 Replacing the Lamp 57 Removing and Installing the Lamp Unit 58 Resetting the Lamp Timer 59 Storing the Projector 60 How to Use the Storage Case 60 Computer Compatibility Chart 61 Troubleshooting 62 For SHARP Assistance 64
  • Sharp XG-F315X | XG-F315X Operation Manual - Page 10
    servicing. 1. Read Instructions All the safety and operating instructions should be read before the product is operated. 2. Retain Instructions The safety and operating instructions Any mounting of the product should follow the manufacturer's instructions, and should use a mounting accessory
  • Sharp XG-F315X | XG-F315X Operation Manual - Page 11
    way. f. When the product exhibits a distinct change in performance, this indicates a need for service. 19. Replacement Parts When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original
  • Sharp XG-F315X | XG-F315X Operation Manual - Page 12
    of glass par- ticles if lamp ruptures. In case of lamp rupture, contact your nearest Sharp Authorized Projector Dealer or Service Center for replacement. See "Replacing the Lamp" on page 57. Caution concerning the setup of the projector ■ For minimal servicing and to maintain high image quality
  • Sharp XG-F315X | XG-F315X Operation Manual - Page 13
    off the equipment to be connected. ■ Please read the operation manuals of the projector and the equipment to be connected for instructions on how to make the connections. Temperature monitor function ■ If the projector starts to overheat due to setup problems or blockage of the air vents, " " and
  • Sharp XG-F315X | XG-F315X Operation Manual - Page 14
    the pdf file to access the projector manuals. When you want to view the SETUP MANUAL 1) Double Projector Network Environment 9 Controlling the Projector via LAN 15 Setting up the Projector Using RS-232C or Telnet 20 Resetting the Lamp Timer of the Projector via LAN .......... 30 Troubleshooting
  • Sharp XG-F315X | XG-F315X Operation Manual - Page 15
    ■ Lamp unit ■ Ceiling-mount bracket ■ Extension tube AN-C3CP2 AN-MR2 AN-F310LP AN-XRCM30 (for U.S.A.) AN-60KT AN-TK201 AN-TK202 Note • Some of the optional accessories may not be available depending on the region. Please check with your nearest Sharp Authorized Projector Dealer or Service Center
  • Sharp XG-F315X | XG-F315X Operation Manual - Page 16
    and Functions Numbers in Z refer to the main pages in this operation manual where the topic is explained. Projector Top View Power 26 indicator 55 STANDBY/ON button 26 For turning the power on and putting the projector into standby mode. ENTER button For setting 39 items selected or
  • Sharp XG-F315X | XG-F315X Operation Manual - Page 17
    in Z refer to the main pages in this operation manual where the topic is explained. Rear View Terminals MONITOR This projector has a Kensington Security Standard connector for use with a Kensington MicroSaver Security System. Refer to the information that came with the system for instructions on
  • Sharp XG-F315X | XG-F315X Operation Manual - Page 18
    and Functions (Continued) STANDBY button 26 For putting the projector into the standby mode. COMPUTER, DVI, 30 S-VIDEO computer. ECO+QUIET button 33 For lowering the noise of the cooling fan and extending the lamp life. 14 26 ON button For turning the power on. 34 FREEZE button For freezing
  • Sharp XG-F315X | XG-F315X Operation Manual - Page 19
    The batteries included with this projector may run down in a short period, depending on how they are kept. Be sure to replace them as soon as possible malfunction under a fluorescent lamp. In this case, move the projector away from the fluorescent lamp. Remote control signal transmitters Remote
  • Sharp XG-F315X | XG-F315X Operation Manual - Page 20
    the computer). For details, see the page described below for each step. Setup and Projection In this section, connection of the projector and the computer is explained using one example. 3 8 STANDBY/ON button 8 STANDBY button 6 INPUT buttons 3 ON button 4 ENTER button 5 Adjustment buttons
  • Sharp XG-F315X | XG-F315X Operation Manual - Page 21
    Quick Start 4. Adjust the projected image with the Setup Guide 1 After the projector turns on, the Setup Guide appears. (When "Setup Guide" is set to "On". See page 45.) 2 Follow the steps in the Setup Guide and adjust the focus, picture size, and height (angle). 3 After adjusting the focus, height
  • Sharp XG-F315X | XG-F315X Operation Manual - Page 22
    "Screen Size and Projection Distance". Ceiling-mount Setup ■ It is recommended that you use the optional Sharp ceiling-mount bracket for this installation. Before mounting the projector, contact your nearest Sharp Authorized Projector Dealer or Service Center to obtain the recommended ceiling
  • Sharp XG-F315X | XG-F315X Operation Manual - Page 23
    Projection (PRJ) Mode The projector can use any of the 4 projection modes shown in the diagram below. Select the mode most appropriate for the projection setting in use. (You can set the PRJ mode in "SCR-ADJ" menu. See page 45.) ■ Table mounted, front projection [Menu item ➞ "Front"] ■ Ceiling
  • Sharp XG-F315X | XG-F315X Operation Manual - Page 24
    Setting up the Projector (Continued) Screen Size and Projection Distance NORMAL Mode (4:3) Picture (Screen) size Diag. [χ] Width Height Projection distance [L] Distance from the lens center Minimum [L1] Maximum [L2]
  • Sharp XG-F315X | XG-F315X Operation Manual - Page 25
    to be connected. After making all connections, turn on the projector and then the other pieces of equipment. When connecting a computer keys simultaneously when using a SHARP notebook computer). Refer to the specific instructions in your computer's operation manual to enable your computer's external
  • Sharp XG-F315X | XG-F315X Operation Manual - Page 26
    provided by the video equipment manufacturer. • When you connect video equipment with a 21-pin RGB output (Euro-scart) to the projector, use a commercially available cable that fits in the projector terminal you want to connect. • The projector does not support RGBC signals via the Euro-scart. 22
  • Sharp XG-F315X | XG-F315X Operation Manual - Page 27
    Cable ø3.5 mm ø3.5 mm stereo or mono audio cable audio output (commercially available or available terminal as Sharp service part QCNWGA038WJPZ) Terminal on the projector AUDIO 1 Monitor Amplifier RCA audio output terminal RCA audio cable (commercially available) AUDIO 2 Audio output terminal
  • Sharp XG-F315X | XG-F315X Operation Manual - Page 28
    an RS-232C serial control cable (cross type, commercially available), the computer can be used to control the projector and check the status of the projector. Refer to the "SETUP MANUAL" contained on the supplied CD-ROM for "RS-232C Specifications and Commands". When connecting to a computer using
  • Sharp XG-F315X | XG-F315X Operation Manual - Page 29
    -over Category 5 (CAT.5) type cable (commercially available). Connecting the Power Cord Plug the supplied power cord into the AC socket on the rear of the projector. Then plug into AC outlet. AC socket Power cord (supplied) To AC outlet 25
  • Sharp XG-F315X | XG-F315X Operation Manual - Page 30
    indicator illuminates to indicate the status of the lamp. Green: The lamp is on. Blinking in green: The lamp is warming up. Red: The lamp is shut down abnormally or the lamp should be replaced. • When switching on the projector, a slight flickering of the image may be experienced within the first
  • Sharp XG-F315X | XG-F315X Operation Manual - Page 31
    Image Projection Setup Guide screen About the Setup Guide After turning on the projector, the Setup Guide screen appears to assist you with projector setup. Guidance items 1 FOCUS 2 HEIGHT ADJUST 3 ZOOM Press ENTER to exit the Setup Guide screen. Note • The Setup Guide screen automatically high-
  • Sharp XG-F315X | XG-F315X Operation Manual - Page 32
    can be adjusted using the adjustment feet at the front and rear of the projector. When the screen is above the projector, the projection image can be made higher by adjusting the projector. 1 Lift the projector to adjust its height while lifting the HEIGHT ADJUST lever. HEIGHT ADJUST lever
  • Sharp XG-F315X | XG-F315X Operation Manual - Page 33
    on the screen. 3 Press KEYSTONE. • The on-screen display of the Keystone Correction mode will disappear. • You can also use KEYSTONE on the projector. Info • While adjusting the image using Keystone Correction, straight lines and the edges of the image may appear jagged. About the Auto Keystone
  • Sharp XG-F315X | XG-F315X Operation Manual - Page 34
    for the connected equipment. Press COMPUTER, DVI, S-VIDEO or VIDEO on the remote control to select the input mode. • When you press INPUT on the projector or DVI on the remote control, the INPUT list appears. Press P/R to switch the INPUT mode. COMPUTER, DVI, S-VIDEO, VIDEO buttons AV MUTE button
  • Sharp XG-F315X | XG-F315X Operation Manual - Page 35
    a desired image. Press RESIZE. • See page 44 for setting on menu screen. RESIZE button COMPUTER 4:3 aspect ratio Other aspect ratios SVGA (800 × 600) XGA (1024 × 768) SXGA (1152 × 864) SXGA+ (1400 × 1050) SXGA (1280 × 1024) 1280 × 720 1360 × 768 1366 × 768 1280 × 768 1280 × 800 NORMAL 1024
  • Sharp XG-F315X | XG-F315X Operation Manual - Page 36
    Image Projection (Continued) VVIIDDEOO/DTV Input signal Video/DTV Image type NORMAL For 4:3 screen AREA ZOOM V-STRETCH For 16:9 screen BORDER STRETCH * * 480I, 480P, 576I, 576P, NTSC, PAL, SECAM 4:3 aspect ratio Squeeze * * * * Letter box 720P, 1035I, 1080I, 1080P 16:9 aspect
  • Sharp XG-F315X | XG-F315X Operation Manual - Page 37
    fan will turn down, the power consumption will decrease, and the lamp life will extend. Note • Refer to "Lamp Setting" on page 43 for de- tails of the Eco+Quiet mode. Note • Break Timer does not function while the projector is operating the "Auto Sync", "FREEZE" or "AV MUTE" functions. Useful
  • Sharp XG-F315X | XG-F315X Operation Manual - Page 38
    (Auto Sync Adjustment) Displaying an Enlarged Portion of an Image Auto Sync function works when detecting input signal after the projector turns on. Press AUTO SYNC to manually adjust with Auto Sync function. Note • When the optimum image cannot be achieved with Auto Sync adjustment, use the help
  • Sharp XG-F315X | XG-F315X Operation Manual - Page 39
    projector with the remote control. For details, see the operation manual of the receiver. Connecting with a USB cable Computer To USB terminal Remote receiver To USB terminal (optional, AN-MR2) or USB cable (commercially available or available as Sharp service that do not support USB. •
  • Sharp XG-F315X | XG-F315X Operation Manual - Page 40
    items that can be set in the projector. "Picture" menu PAGE 1 Picture Picture Mode Contrast Bright Color Tint Sharp Red Blue SCR PRJ Net. Help Standard [On/Off] Page 42 C.M.S. Page 42 Progressive *2 Page 43 Lamp Setting Page 43 Reset 2D Progressive 3D Progressive Film Mode Bright Eco
  • Sharp XG-F315X | XG-F315X Operation Manual - Page 41
    Display [On/Off] Page 45 Background Page 45 Setup Guide [On/Off] Page 45 PRJ Mode Page 45 Language çais Italiano Svenska Português Useful Features "Projector adjustment (PRJ-ADJ)" menu Pict. SCR Sound Speaker Audio Input RS-232C Fan Mode System Lock Lamp Timer(Life) PRJ-ADJ 0h Net. Help On On
  • Sharp XG-F315X | XG-F315X Operation Manual - Page 42
    IP MAC Address X X : X X : X X : X X : X X : X X Projector XX-XXXX SEL./ADJ. ENTER END Main menu Network Page 49 Password [Enable/Disable] Page 49 DHCP Client [On/Off] Page 50 TCP/IP Page 50 MAC Address Page 50 Projector Page 50 "Help" menu Pict. SCR PRJ Net. There is no picture
  • Sharp XG-F315X | XG-F315X Operation Manual - Page 43
    Bright". • This operation can also be performed by using the buttons on the projector. 1 Press MENU/HELP. • The "Picture" menu screen for the selected Contrast Bright Red Blue CLR Temp BrilliantColorTM C.M.S. Setting C.M.S. Lamp Setting Reset PRJ Net. Help Standard 0 0 0 0 0 0 On Bright
  • Sharp XG-F315X | XG-F315X Operation Manual - Page 44
    Picture Mode Contrast Bright Red Blue CLR Temp BrilliantColorTM C.M.S. Setting C.M.S. Lamp Setting Reset SEL./ADJ. PRJ Net. Help Standard 0 15 0 0 0 0 On Bright Single ADJ END Note • Menu buttons do not function while the projector is operating the "Auto Sync", "Break Timer", "FREEZE", or
  • Sharp XG-F315X | XG-F315X Operation Manual - Page 45
    item when selecting Picture Mode CLR Temp BrilliantColorTM Lamp Setting Standard For standard image 0 Presentation Brightens portions . Movie Gives natural tint to the -1 projected image. Game Gives sharpness to the 0 projected image. *sRGB For high fidelity reproduction of
  • Sharp XG-F315X | XG-F315X Operation Manual - Page 46
    making the effect weaker. Q button For more contrast. For more brightness. For more color intensity. For making skin tones greenish. For more sharpness. For stronger red. For stronger blue. For making the effect stronger. *1 Not displayed in the RGB input mode. *2 Not adjustable/selectable when
  • Sharp XG-F315X | XG-F315X Operation Manual - Page 47
    with the original encoded as is at 24 frames/second. The projector can convert this film source to progressive video at 60 frames/second 2D Progressive, 3D Progressive and Film Mode cannot be selected. 6 Lamp Setting Selectable items Eco + Quiet Bright Brightness and Power consumption Approx
  • Sharp XG-F315X | XG-F315X Operation Manual - Page 48
    2 Image Shift 3 Keystone Auto Keystone 4 OSD Display 5 Background 6 Setup Guide 7 PRJ Mode 8 Language PRJ Net. Border 0 0 On On Logo On " on the "SCR - ADJ" menu to "On". For Manual Keystone Correction Set "Auto Keystone" on the "SCR - ADJ" projector to adjust Keystone Correction. 44
  • Sharp XG-F315X | XG-F315X Operation Manual - Page 49
    Background Image Selectable items Logo Blue None Description Sharp logo screen Blue screen - 6 Selecting the Setup Guide Selectable items On Off Description Displaying the Setup Guide when turning the projector on. Not displaying the Setup Guide. 8 Selecting the On-screen Display Language The
  • Sharp XG-F315X | XG-F315X Operation Manual - Page 50
    adjustment may take some time to complete, depending on the image of the computer connected to the projector. • When the optimum image cannot be achieved with Auto Sync adjustment, use manual adjustments. (See page 51.) 2 Auto Power Off Function Selectable items On Off Description When no input
  • Sharp XG-F315X | XG-F315X Operation Manual - Page 51
    keycode in a safe place where only authorized users have access. Info • If you lose or forget your keycode, contact your nearest Sharp Authorized Projector Dealer or Service Center (see page 64). Even if the product warranty is valid, the keycode reset will incur a charge. Menu operation n Page 39
  • Sharp XG-F315X | XG-F315X Operation Manual - Page 52
    lamp life may vary depending on the usage condition. • When the projector is in standby mode, you can release the keylock by holding down ENTER and STANDBY/ON on the projector simultaneously for about 5 seconds. Info • Keylock cannot be set while the projector is: displaying the "Setup Guide" or
  • Sharp XG-F315X | XG-F315X Operation Manual - Page 53
    Network Environment ("Network" menu) Pict. SCR PRJ 1 Password Network Disable Help 2 DHCP Client Off 3 TCP/IP MAC Address X X : X X : X X : X X : X X : X X 4 Projector XX-XXXX Menu operation n Page 39 SEL./ADJ. ENTER END 1 Setting a Password If you do not want others to change the
  • Sharp XG-F315X | XG-F315X Operation Manual - Page 54
    MAC address of the projector is displayed. The projector name is displayed. 4 Enter "Subnet Mask" using P, R, Q and O, then press ENTER. 5 Enter "Gateway" using P, R, Q and O, then press ENTER. Note • For information on how to change the projector name, see "SETUP MANUAL" contained in the supplied
  • Sharp XG-F315X | XG-F315X Operation Manual - Page 55
    marks (✔). • The items in the "Help" menu change, de- pending on the input signal or setting that you have selected. • If the problem is not solved, refer to "Troubleshooting" (see pages 62 and 63). • When selecting "sRGB" in "Picture Mode", the item "Color is faded or poor" is not displayed. This
  • Sharp XG-F315X | XG-F315X Operation Manual - Page 56
    use volatile agents such as insecticides on the projector. Do not attach rubber or plastic items to the projector for long periods. The effects of some of agents in the plastic may cause damage to the quality or finish of the projector. ■ Wipe off dirt gently with a soft flannel cloth. ■ When the
  • Sharp XG-F315X | XG-F315X Operation Manual - Page 57
    Cleaning and Replacing the Dust Filters Cleaning the Dust Filters Info • The dust filters should be cleaned every 100 hours of use. Clean the filters more often when the projector is used in a dusty or smoky location. 1 Press STANDBY/ON on the projector to put the projector into standby mode. •
  • Sharp XG-F315X | XG-F315X Operation Manual - Page 58
    will not turn on unless it is correctly installed. Replacing the Dust Filters Info • If the filters become too dirty to clean effectively, purchase new ones (PFILDA025WJZZ) from your nearest Sharp Authorized Projector Dealer or Service Center. Reinforcement seal After removing the filter holders
  • Sharp XG-F315X | XG-F315X Operation Manual - Page 59
    will illuminate in red. ■ If you try to turn on the projector a fourth time without replacing the lamp, the projector will not turn on. Indicators on the Projector Power indicator Red on Green on Red blinks Green blinks Lamp indicator Green on Green blinks Red on Temperature warning Off
  • Sharp XG-F315X | XG-F315X Operation Manual - Page 60
    AC outlet, and then connect it again. • Carefully replace the lamp. (See page 57.) • Take the projector to your nearest Sharp Authorized Projector Dealer or Service Center (see page 64) for repair. • Please exercise care when replacing the lamp. • Securely install the cover. • If the power indicator
  • Sharp XG-F315X | XG-F315X Operation Manual - Page 61
    the instructions described in this section. * If you wish, you may have the lamp replaced at your nearest Sharp Authorized Projector Dealer or Service Center. * If the new lamp does not light after replacement, take your projector to the nearest Sharp Authorized Projector Dealer or Service Center
  • Sharp XG-F315X | XG-F315X Operation Manual - Page 62
    the power cord from the AC socket. • Leave the lamp until it has fully cooled down (about 1 hour). 3 Remove the lamp unit cover. • Turn the projector over. Loosen the user service screw (1) that secures the lamp unit cover. Remove the lamp unit cover (2). STANDBY/ON button AC socket 1 2 User
  • Sharp XG-F315X | XG-F315X Operation Manual - Page 63
    the user service screw (3) to secure the lamp unit cover. Info • If the lamp unit and lamp unit cover are not correctly installed, the power will not turn on, even if the power cord is connected to the projector. Resetting the Lamp Timer Reset the lamp timer after replacing the lamp. Info • Make
  • Sharp XG-F315X | XG-F315X Operation Manual - Page 64
    that the cooling fan has stopped. • Ensure the lens cap is attached to the lens for protection. • Place the projector into the storage case with the lens facing the handle. • Ensure the projector is held in place by using the fixing band. • Do not expose the storage case to direct sunlight or
  • Sharp XG-F315X | XG-F315X Operation Manual - Page 65
    is a list of modes that conform to VESA. However, this projector supports other signals that are not VESA standards. PC/MAC PC MAC 13 × 1024 1280 × 1024 SXGA+ 1400 × 1050 UXGA 1600 × 1200 VGA 640 × 480 SVGA 832 × 624 XGA 1024 × 768 SXGA 1152 × 870 27.0 31.5 37.5 27.0 31.5 37.9 27.0 31.5 27.0 31.5
  • Sharp XG-F315X | XG-F315X Operation Manual - Page 66
    Troubleshooting Problem No picture and no sound or projector does not start. Sound is heard but no picture appears (or picture is dark). Check • Projector the projector. • Remote control battery has run out. • External output has not been set when connecting notebook computer. • The lamp unit
  • Sharp XG-F315X | XG-F315X Operation Manual - Page 67
    The cooling fan becomes • When temperature inside the projector increases, the cooling fan noisy. runs faster. The lamp does not light • The lamp indicator is illuminating in red. up even after the Replace the lamp. projector turns on. The lamp suddenly turns off during projection. The image
  • Sharp XG-F315X | XG-F315X Operation Manual - Page 68
    If you encounter any problems during setup or operation of this projector, first refer to the "Troubleshooting" section on pages 62 and 63. If this operation manual does not answer your question, please contact the SHARP Service departments listed below. U.S.A. Sharp Electronics Corporation 1-888
  • Sharp XG-F315X | XG-F315X Operation Manual - Page 69
    lamp Rated voltage Rated frequency Input current Power consumption (Standby) Operation temperature Cabinet Dimensions (main body only) Weight (approx.) XG-F315X 0.55" DLP® Chip XGA (1024 × 768) F 2.4 - 2.6 Manual part of policy of continuous improvement, SHARP reserves the right to make design
  • Sharp XG-F315X | XG-F315X Operation Manual - Page 70
    Dimensions Units: inches (mm) 13 64/ (5) 11 1/32 (280) 23 64/ (9) 2 7/8 (73) 1 55 64/ (47) 7/16 (11) 4 19 64/ (109) ø9 7/64 (69.2) 3 5/32 (80) 12 /13 32 (315) 3 1/16 (77.5) 66 1 /11 32 (33.8) 2 /61 64 (75) 1 /53 64 (46.2) 2 /19 32 (65.5) 7/16 (11) 1 7/8 (47.5) 4 7/64 (104)
  • Sharp XG-F315X | XG-F315X Operation Manual - Page 71
    45 PAGE DOWN button 35 PAGE UP button 35 Password 49 PDF 10 Picture Adjustment 41 Picture Mode 34, 41 PICTURE MODE Replacing the lamp 57, 58 Resize 31, 44 RESIZE button 31 RGB cable 21 RS-232C terminal 24 SCR - ADJ 44 Screen Size and Projection Distance 20 Setup Guide 27, 45 Sharp
  • Sharp XG-F315X | XG-F315X Operation Manual - Page 72
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
DATA PROJECTOR
MODEL
XG-F315X
Introduction
Quick Start
Setup
Connections
Basic
Operation
Useful
Features
Appendix
OPERATION MANUAL