Sharp XG-MB50X-L PG-MB56X , PG-MB66X Operation Manual
Sharp XG-MB50X-L - Notevision XGA DLP Projector Manual
 |
View all Sharp XG-MB50X-L manuals
Add to My Manuals
Save this manual to your list of manuals |
Sharp XG-MB50X-L manual content summary:
- Sharp XG-MB50X-L | PG-MB56X , PG-MB66X Operation Manual - Page 1
Introduction Quick Start MULTIMEDIA PROJECTOR MODEL PG-MB66X/PG-MB56X XG-MB50X-L XR-11XC-L XR-10X-L/XR-10S-L OPERATION MANUAL Setup Connections Basic Operation Useful Features Appendix - Sharp XG-MB50X-L | PG-MB56X , PG-MB66X Operation Manual - Page 2
IMPORTANT • For your assistance in reporting the loss or theft of your Projector, please record the Model and Serial Number located on the bottom of the projector and retain this information. • Before recycling the packaging, please ensure that you have checked the contents of the carton thoroughly - Sharp XG-MB50X-L | PG-MB56X , PG-MB66X Operation Manual - Page 3
operation manual carefully. Introduction ENGLISH There are two important reasons for prompt warranty registration of your new SHARP Projector, using the REGISTRATION CARD packed with the projector. 1. WARRANTY This is to assure that you immediately receive the full benefit of the parts, service - Sharp XG-MB50X-L | PG-MB56X , PG-MB66X Operation Manual - Page 4
Concerning Lamp Replacement See "Replacing the Lamp" on page 52. This SHARP projector uses a DMD panel. This very sophisticated panel contains 786,432 (PGMB66X/PG-MB56X/XG-MB50X-L/XR-11XC-L/XR-10X-L) / 480,000 (XR-10S-L) pixels (micromirrors). As with any high technology electronic equipment such - Sharp XG-MB50X-L | PG-MB56X , PG-MB66X Operation Manual - Page 5
. • In this operation manual, the illustration and the Bright Red Blue CLR Temp Bright Boost Lamp Setting Reset 0 0 0 0 7500K 1 Standard projector. Note .........Indicates additional information for setting up and operating the projector. For Future Reference Maintenance P. 47 Troubleshooting - Sharp XG-MB50X-L | PG-MB56X , PG-MB66X Operation Manual - Page 6
Projector On/Off 27 Turning the Projector on 27 Turning the Power off (Putting the Projector into Standby Mode 27 Image Projection 28 About the Setup Guide the Lamp Life Status 44 System Lock Function 44 Locking the Operation Buttons on the Projector (Keylock Function 45 Troubleshooting with - Sharp XG-MB50X-L | PG-MB56X , PG-MB66X Operation Manual - Page 7
Lamp 52 Lamp 52 Caution Concerning the Lamp 52 Replacing the Lamp 52 Removing and Installing the Lamp Unit 53 Resetting the Lamp Timer 54 Connecting Pin Assignments 55 RS-232C Specifications and Command Settings 56 Computer Compatibility Chart 60 Troubleshooting 61 For SHARP Assistance - Sharp XG-MB50X-L | PG-MB56X , PG-MB66X Operation Manual - Page 8
servicing. 1. Read Instructions All the safety and operating instructions should be read before the product is operated. 2. Retain Instructions The safety and operating instructions grounding terminal. This plug will only fit into a grounding type power outlet for long periods of time, unplug it from - Sharp XG-MB50X-L | PG-MB56X , PG-MB66X Operation Manual - Page 9
the operating instructions. Adjust only those controls that are covered by the operating instructions, as service. 19. Replacement Parts When replacement parts are required, be sure the service technician has used replacement that produce heat. • DLP® and the DLP logo are registered trademarks of - Sharp XG-MB50X-L | PG-MB56X , PG-MB66X Operation Manual - Page 10
of glass par- ticles if lamp ruptures. In case of lamp rupture, contact your nearest Sharp Authorized Projector Dealer or Service Center for replacement. See "Replacing the Lamp" on page 52. Caution concerning the setup of the projector I For minimal servicing and to maintain high image quality - Sharp XG-MB50X-L | PG-MB56X , PG-MB66X Operation Manual - Page 11
from the AC outlet and turning off the equipment to be connected. I Please read the operation manuals of the projector and the equipment to be connected for instructions on how to make the connections. Using the projector in other countries I The power supply voltage and the shape of the plug - Sharp XG-MB50X-L | PG-MB56X , PG-MB66X Operation Manual - Page 12
I Lamp unit AN-C3CP2 AN-A1RS AN-MR2 AN-XR20L2 (for PG-MB66X/PG-MB56X) AN-XR10L2 (for XG-MB50X-L/XR-11XC-L/ XR-10X-L/XR-10S-L) Note • Some of the optional accessories may not be available depending on the region. Please check with your nearest Sharp Authorized Projector Dealer or Service Center - Sharp XG-MB50X-L | PG-MB56X , PG-MB66X Operation Manual - Page 13
and Functions Numbers in Z refer to the main pages in this operation manual where the topic is explained. Projector Top View Power indicator 27, 50 STANDBY/ON 27 button For turning the power on and putting the projector into standby mode. ENTER button 37 For setting items selected or adjusted - Sharp XG-MB50X-L | PG-MB56X , PG-MB66X Operation Manual - Page 14
manual where the topic is explained. Rear View Terminals Refer to "INPUT Terminals and Connectable Main Equipment" projector has a Kensington Security Standard connector for use with a Kensington MicroSaver Security System. Refer to the information that came with the system for instructions - Sharp XG-MB50X-L | PG-MB56X , PG-MB66X Operation Manual - Page 15
main pages in this operation manual where the topic is explained. STANDBY button 27 For putting the projector into the standby mode. KEYSTONE Receiver (AN-MR2). BREAK TIMER 34 button For displaying the break time. AV MUTE button 30 For temporarily displaying a black screen and turning - Sharp XG-MB50X-L | PG-MB56X , PG-MB66X Operation Manual - Page 16
to leak or explode. Please follow the precautions below. Caution • Danger of explosion if battery is incorrectly replaced. Replace only with • The batteries included with this projector may run down in a short period, depending on how they are kept. Be sure to replace them as soon as possible with - Sharp XG-MB50X-L | PG-MB56X , PG-MB66X Operation Manual - Page 17
that you do not drop it or expose it to moisture or high temperature. • The remote control may malfunction under a fluorescent lamp. In this case, move the projector away from the fluorescent lamp. 30° Remote control signal transmitters 30° Remote control sensor 23n (7 m) Remote control 15 - Sharp XG-MB50X-L | PG-MB56X , PG-MB66X Operation Manual - Page 18
buttons (P/R/O/Q) 4 HEIGHT ADJUST lever 6 INPUT 1 button 1. Place the projector facing a wall or a screen _P. 18 2. Connect the projector to the computer and plug the power cord into the AC socket of the projector When connecting equipment other than a computer, see pages 24 and 25. _PP. 21-26 - Sharp XG-MB50X-L | PG-MB56X , PG-MB66X Operation Manual - Page 19
Quick Start 4. Adjust the projected image with the Setup Guide 1 After the projector turns on, the Setup Guide appears. (When "Setup Guide" is set to "On". See page 42.) 2 Follow the steps in the Setup Guide and adjust the focus, picture size, and height (angle). 3 After adjusting the focus, height - Sharp XG-MB50X-L | PG-MB56X , PG-MB66X Operation Manual - Page 20
". Ceiling-mount Setup I It is recommended that you use the optional Sharp ceiling-mount bracket for this installation. Before mounting the projector, contact your nearest Sharp Authorized Projector Dealer or Service Center to obtain the recommended ceiling-mount bracket (sold separately). • AN - Sharp XG-MB50X-L | PG-MB56X , PG-MB66X Operation Manual - Page 21
Projection (PRJ) Mode The projector can use any of the 4 projection modes shown in the diagram below. Select the mode most appropriate for the projection setting in use. (You can - Sharp XG-MB50X-L | PG-MB56X , PG-MB66X Operation Manual - Page 22
Setting up the Projector (Continued) Screen Size and Projection Distance NORMAL Mode (4:3) Picture (Screen) size Diag. [χ] Width Height Projection distance [L] Minimum [L1] Maximum [L2] 300Љ (762 cm) 610 cm ( - Sharp XG-MB50X-L | PG-MB56X , PG-MB66X Operation Manual - Page 23
DVD player, etc.). (See page 24.) RS-232C terminal Connecting the computer to control the projector. (See page 26.) AUDIO OUTPUT terminal Connecting to an amplifier or other audio equipment with an audio cable (commercially available) (Shared audio output terminal for INPUT 1, 2, 3 and 4). Use an - Sharp XG-MB50X-L | PG-MB56X , PG-MB66X Operation Manual - Page 24
Input Signal Cable Terminal on the projector Computer RGB video RGB cable (supplied) INPUT1, 2 Audio-visual equipment ø3.5 mm stereo audio cable AUDIO INPUT Computer audio (commercially available or available as Sharp service part QCNWGA038WJPZ) Component video 3 RCA to 15-pin - Sharp XG-MB50X-L | PG-MB56X , PG-MB66X Operation Manual - Page 25
may not be projected unless the computer's external output port is switched on. (e.g. Press "Fn" and "F5" keys simultaneously when using a SHARP notebook computer). Refer to the specific instructions in your computer's operation manual to enable your computer's external output port. Connections 23 - Sharp XG-MB50X-L | PG-MB56X , PG-MB66X Operation Manual - Page 26
Connecting to Video Equipment The projector is equipped with input terminals that support component, S-video, and video signals. See the illustration below to connect with the audio-visual equipment. The image quality is highest in the order of the component signal, the S-video signal and the video - Sharp XG-MB50X-L | PG-MB56X , PG-MB66X Operation Manual - Page 27
available) Composite video cable (commercially available) Connecting to a Monitor with RGB Input Terminal You can display computer images on both the projector and a separate monitor using two sets of RGB cables. Computer Monitor To INPUT 1 terminal To RGB output terminal To OUTPUT (INPUT - Sharp XG-MB50X-L | PG-MB56X , PG-MB66X Operation Manual - Page 28
PG-MB66X/PG-MB56X/ XG-MB50X-L. RS-232C serial control manual of the computer for details. • See page 55 for connection of an RS-232C serial control cable. Info • Do not connect the RS-232C cable to a port other than the RS-232C terminal on the computer. This may damage your computer or projector - Sharp XG-MB50X-L | PG-MB56X , PG-MB66X Operation Manual - Page 29
indicator illuminates to indicate the status of the lamp. Green: The lamp is on. Blinking in green: The lamp is warming up or shutting down. Red: The lamp is shut down abnormally or the lamp should be replaced. • When switching on the projector, a slight flickering of the image may be experienced - Sharp XG-MB50X-L | PG-MB56X , PG-MB66X Operation Manual - Page 30
for the next time, set "Menu" - "SCR - ADJ" "Setup Guide" to "Off". (See page 42.) Adjusting the Projected Image STANDBY/ON button ENTER button Zoom ring 1 Adjusting the Focus You can adjust the focus with the focus ring on the projector. Rotate the focus ring to adjust the focus while watching - Sharp XG-MB50X-L | PG-MB56X , PG-MB66X Operation Manual - Page 31
can be adjusted using the adjustment feet at the front and rear of the projector. When the screen is above the projector, the projection image can be made higher by adjusting the projector. 1 Lift the projector to adjust its height while lifting the HEIGHT ADJUST lever. 2 Remove your hands from - Sharp XG-MB50X-L | PG-MB56X , PG-MB66X Operation Manual - Page 32
on/ off or when changing the input signal. • When you do not want to output the sound from the projector's speaker while the projector is connected to external equipment, set "Speaker" in "PRJ-ADJ" menu to "Off". (See page 43.) On-screen Display Displaying the Black Screen and Turning off - Sharp XG-MB50X-L | PG-MB56X , PG-MB66X Operation Manual - Page 33
g KEYSTONE to enter the Keystone Correction mode. • You can also display the on-screen display of the Keystone Correction mode with d KEYSTONE on the projector. 2 Press P/Q or O/R to adjust the Keystone Correction. • You can also adjust the Keystone Correction using the adjustment buttons on the - Sharp XG-MB50X-L | PG-MB56X , PG-MB66X Operation Manual - Page 34
Computer 4:3 aspect ratio Other aspect ratios SVGA (800 K 600) XGA (1024 K 768) SXGA (1280 K 960) SXGA L (1400 K 1050) SXGA (1280 K 1024) 1280 K 720 NORMAL PG-MB66X/MB56X/ XG-MB50X-L/ XR-11XC-L/10X-L XR-10S-L BORDER PG-MB66X/MB56X/ XG-MB50X-L/ XR-11XC-L/10X-L XR-10S-L STRETCH PG-MB66X/MB56X - Sharp XG-MB50X-L | PG-MB56X , PG-MB66X Operation Manual - Page 35
VIDEO • "STRETCH" is fixed when 540P, 720P or 1080I signals are entered. Input Signal DVD / Video Image type NORMAL Output screen image BORDER STRETCH 4:3 aspect ratio 480I, 480P, 576I, 576P, NTSC, PAL, SECAM Letter box Squeezed 16:9 image Squeezed 4:3 image 540P, 720P, 1080I 16:9 - Sharp XG-MB50X-L | PG-MB56X , PG-MB66X Operation Manual - Page 36
works when detecting input signal after the projector turns on. Press FAUTO SYNC to manually adjust with Auto Sync function. Note minutes s 3 minutes s1 minute • The break time can be set in units of one minute (up to 60 minutes). Canceling the break time display function Press k BREAK TIMER. Note • - Sharp XG-MB50X-L | PG-MB56X , PG-MB66X Operation Manual - Page 37
projector. Main menu "Picture" menu Picture Picture Mode INPUT 1 (RGB)/INPUT2 (RGB) Page 39 Page 39 Picture SCR - ADJ PRJ - ADJ Picture Mode Contrast Bright Red Blue CLR Temp Bright Boost Lamp Setting Reset Sharp CLR Temp Bright Boost Progressive Lamp Setting Reset -MB56X/XG-MB50X-L/ XR Guide - Sharp XG-MB50X-L | PG-MB56X , PG-MB66X Operation Manual - Page 38
Projector adjustment (PRJ-ADJ)" menu Picture SCR - ADJ Auto Search Auto Sync Auto Power Off System Sound Speaker RS-232C Fan Mode System Lock PRJ - ADJ On On On On On 9600 bps Normal Help Main menu PRJ - ADJ Page 43 Lamp dark The image is distorted Reset all adjustments to default settings - Sharp XG-MB50X-L | PG-MB56X , PG-MB66X Operation Manual - Page 39
Bright". • This operation can also be performed by using the buttons on the projector. 1 Press BMENU. • The "Picture" menu screen for the selected input mode Bright Red Blue CLR Temp Bright Boost Lamp Setting Reset 0 0 0 0 7500K 1 Standard Bright Help SEL./ADJ. ENTER END Useful Features 37 - Sharp XG-MB50X-L | PG-MB56X , PG-MB66X Operation Manual - Page 40
ADJ PRJ - ADJ Picture Mode Contrast Bright Red Blue CLR Temp Bright Boost Lamp Setting Reset 0 15 0 0 7500K 1 Standard Bright SEL./ADJ. Single ADJ Help END Note • Menu buttons do not function while the projector is operating the "Auto Sync", "Break Time", "FREEZE", or "AV MUTE" functions. 38 - Sharp XG-MB50X-L | PG-MB56X , PG-MB66X Operation Manual - Page 41
" screen menu for INPUT 3 mode Picture SCR - ADJ PRJ - ADJ Help Picture Mode Contrast Bright Color Tint Sharp CLR Temp Bright Boost Progressive Lamp Setting Reset SEL./ADJ. 0 0 0 0 0 7500K 1 Standard 3D Progressive Bright ENTER END 1 Selecting the Picture Mode Selectable items Description - Sharp XG-MB50X-L | PG-MB56X , PG-MB66X Operation Manual - Page 42
projector XG-MB50X-L XR-11XC-L XR10X-L/10S-L Eco + Approx. Approx. Quiet 80% 76% 280 W 229 W Bright 100% 350 W 298 W Note • In the Eco + Quiet mode, the fan sound and power consumption are lower than those in the Bright mode. (Projection brightness decreases as shown in the chart.) The lamp - Sharp XG-MB50X-L | PG-MB56X , PG-MB66X Operation Manual - Page 43
Shift 3 Keystone Auto Keystone 4 OSD Display 5 Background 6 Setup Guide 7 PRJ Mode 8 Language Normal 0 0 Off On Logo On Front Manual Correction Q button O button O button Q button Useful Features Note • You cannot set this item when "Resize" is set to "Normal". a When using XG-MB50X - Sharp XG-MB50X-L | PG-MB56X , PG-MB66X Operation Manual - Page 44
Language Selectable items Logo Blue None Description Sharp logo screen Blue screen - 6 Selecting the Setup Guide Selectable items On Off Description Displaying the Setup Guide when turning the projector on. Not displaying the Setup Guide. The projector can switch the on-screen display language - Sharp XG-MB50X-L | PG-MB56X , PG-MB66X Operation Manual - Page 45
on the remote control. • The Auto Sync adjustment may take some time to complete, depending on the image of the computer connected to the projector. • When the optimum image cannot be achieved with Auto Sync adjustment, use manual adjustments. (See page 46.) Selectable items On Off Description - Sharp XG-MB50X-L | PG-MB56X , PG-MB66X Operation Manual - Page 46
Lamp Life Status You can confirm the cumulative lamp usage time and the remaining lamp life (percentage). Lamp usage condition "Life" Operated exclusively with Lamp Sharp Authorized Projector Dealer or Service Center (see page 63). Even if the product warranty is valid, the keycode reset will - Sharp XG-MB50X-L | PG-MB56X , PG-MB66X Operation Manual - Page 47
cancel the keycode that you have already set • Press R on the projector for four times in steps 2 and 3 above. When the System Lock is set System Lock ---- Info • Keylock does not function while the projector is: displaying the "Setup Guide" or "Menu" screens, in standby mode, warming up, - Sharp XG-MB50X-L | PG-MB56X , PG-MB66X Operation Manual - Page 48
or poor Picture is dark The image is distorted Help Reset all adjustments to default settings SEL. ENTER END 46 Vertical on the input signal or setting that you have selected. • If the problem is not solved, refer to "Troubleshooting". (see pages 61 and 62) • When selecting "sRGB" in "Picture - Sharp XG-MB50X-L | PG-MB56X , PG-MB66X Operation Manual - Page 49
use volatile agents such as insecticides on the projector. Do not attach rubber or plastic items to the projector for long periods. The effects of some of agents in the plastic may cause damage to the quality or finish of the projector. I Wipe off dirt gently with a soft flannel cloth. I When the - Sharp XG-MB50X-L | PG-MB56X , PG-MB66X Operation Manual - Page 50
Cleaning and Replacing the Dust Filters Cleaning the Dust Filters Info • The dust filters should be cleaned every 100 hours of use. Clean the filters more often when the projector is used in a dusty or smoky location. 1 Press SSTANDBY/ON on the projector to put the projector into standby mode. • - Sharp XG-MB50X-L | PG-MB56X , PG-MB66X Operation Manual - Page 51
will not turn on unless it is correctly installed. Replacing the Dust Filters Info • If the filters become too dirty to clean effectively, purchase new ones (PFILDA025WJZZ) from your nearest Sharp Authorized Projector Dealer or Service Center. Reinforcement seal After removing the filter holders - Sharp XG-MB50X-L | PG-MB56X , PG-MB66X Operation Manual - Page 52
indicator will illuminate in red. I If you try to turn on the projector a fourth time without replacing the lamp, the projector will not turn on. Indicators on the Projector Power indicator Lamp indicator Temperature warning indicator Red on Green on Red blinks Green blinks Green on Green blinks - Sharp XG-MB50X-L | PG-MB56X , PG-MB66X Operation Manual - Page 53
AC outlet, and then connect it again. • Carefully replace the lamp. (See page 53.) • Take the projector to your nearest Sharp Authorized Projector Dealer or Service Center (see page 63) for repair. • Please exercise care when replacing the lamp. • Securely install the cover. • If the power indicator - Sharp XG-MB50X-L | PG-MB56X , PG-MB66X Operation Manual - Page 54
the instructions described in this section. * If you wish, you may have the lamp replaced at your nearest Sharp Authorized Projector Dealer or Service Center. * If the new lamp does not light after replacement, take your projector to the nearest Sharp Authorized Projector Dealer or Service Center - Sharp XG-MB50X-L | PG-MB56X , PG-MB66X Operation Manual - Page 55
Unit Warning! • Do not remove the lamp unit from the projector right after use. The lamp and parts around the lamp will be very hot and may cause burns or injury. Optional accessory Lamp unit AN-XR20L2 (for PG-MB66X/ PG-MB56X) AN-XR10L2 (for XG-MB50X-L/ XR-11XC-L/XR-10X-L/ XR-10S-L) Info • Make - Sharp XG-MB50X-L | PG-MB56X , PG-MB66X Operation Manual - Page 56
to the projector. Securing screws 2 3 1 Resetting the Lamp Timer Reset the lamp timer after replacing the lamp. Info • Make sure to reset the lamp timer only when replacing the lamp. If you reset the lamp timer and continue to use the same lamp, this may cause the lamp to become damaged or explode - Sharp XG-MB50X-L | PG-MB56X , PG-MB66X Operation Manual - Page 57
* (optional accessory: AN-A1RS) * This adaptor is only supplied with PG-MB66X/PG-MB56X/XG-MB50X-L. Pin No. Signal Name I/O Reference 1 5 69 1. 2. RD 3. SD 4. 5. SG 6 on the controlling device (e.g. computer). Projector Computer Pin No. Pin No. 4 4 5 5 6 6 55 Appendix - Sharp XG-MB50X-L | PG-MB56X , PG-MB66X Operation Manual - Page 58
For setting the projector name, send the commands in the order of PJN1, PJN2 and PJN3. *2 Parameters of CLR Temp settings are as follows. CLR Temp Parameter CLR Temp Parameter 5500K _0 5 5 8500K _0 8 5 6500K _0 6 5 9300K _0 9 3 7500K _0 7 5 10500K *3 The Lamp Timer Reset command is - Sharp XG-MB50X-L | PG-MB56X , PG-MB66X Operation Manual - Page 59
Usage Time (Hour) T L T T _ _ _ 1 0 - 9999 (Integer) Lamp Life (Percentage) T L T L _ _ _ 1 0% - 100% (Integer) Model Name Check T N A M _ _ _ 1 PGMB66X/PGMB56X/XGMB50XL/XR11XCL/XR10XL/XR10SL Model Name Check M N R D _ _ _ 1 PG-MB66X/PG-MB56X/XG-MB50X-L/XR-11XC-L/XR-10X-L/XR-10S-L Projector - Sharp XG-MB50X-L | PG-MB56X , PG-MB66X Operation Manual - Page 60
30 - 30) INPUT 1 Blue (30 - 30) INPUT 1 Sharp (30 - 30) INPUT 1 CLR Temp *2 INPUT 1 Bright Boost OK or ERR V B T I _ * * * OK or ERR Power ON RETURN Standby mode (or 40-second startup time) ERR ERR ERR ERR ERR ERR ERR ERR ERR ERR ERR ERR ERR ERR ERR ERR ERR ERR ERR ERR ERR ERR ERR - Sharp XG-MB50X-L | PG-MB56X , PG-MB66X Operation Manual - Page 61
Reset Auto Sync : Off Auto Sync : On Internal Speaker : Off Internal Speaker : On Image Shift (96 - 96 (XGA Guide : Off Setup Guide : On System Sound : Off System Sound : On RGB Horizontal Frequency Check RGB Vertical Frequency Check Fan Mode : Normal Fan Mode : High Lamp Timer Reset time) - Sharp XG-MB50X-L | PG-MB56X , PG-MB66X Operation Manual - Page 62
intelligent compression PG-MB66X/PG-MB56X/XG-MB50X-L/XR-11XC-L/XR-10X-L: SXGA, SXGA+ XR-10S-L: XGA, SXGA, SXGA+ • Intelligent Compression and Expansion System resizing technology The following is a list of modes that conform to VESA. However, this projector supports other signals that are not VESA - Sharp XG-MB50X-L | PG-MB56X , PG-MB66X Operation Manual - Page 63
Troubleshooting Problem Check Page • Projector power cord is not plugged into the wall outlet. • Power to the external connected devices is off. • The selected input mode is wrong. • Cables incorrectly connected to the projector. • Remote control battery has run out. No picture and no sound - Sharp XG-MB50X-L | PG-MB56X , PG-MB66X Operation Manual - Page 64
to the projector or the connected equipment works improperly. • Select "Vertical stripes or flickering image appear" in the "Help" menu and make the necessary adjustments. • If this happens frequently, replace the lamp. The lamp needs much • The lamp will eventually need to be changed. time to - Sharp XG-MB50X-L | PG-MB56X , PG-MB66X Operation Manual - Page 65
If you encounter any problems during setup or operation of this projector, first refer to the "Troubleshooting" section on pages 61 and 62. If this operation manual does not answer your question, please contact the SHARP Service departments listed below. U.S.A. Sharp Electronics Corporation 1-888 - Sharp XG-MB50X-L | PG-MB56X , PG-MB66X Operation Manual - Page 66
lamp [PG-MB66X/PG-MB56X] 275 W DC lamp (AN-XR20L2) [XG-MB50X-L/XR-11XC-L/XR-10X-L/XR-10S-L] 220 W DC lamp Replacement parts Remote control, Power cord, RGB cable, 3 RCA to 15-pin D-sub cable, DIN-Dsub RS-232C adaptor, Operation manual, Dust filter As a part of policy of continuous improvement, SHARP - Sharp XG-MB50X-L | PG-MB56X , PG-MB66X Operation Manual - Page 67
Dimensions Units: inches (mm) 13 64/ (5) 11 1/32 (280) 23 64/ (9) 7/16 (11) 4 19 64/ (109) 2 7/8 (73) 1 55 64/ (47) ø9 7/64 (69.2) 3 5/32 (80) 12 /13 32 (315) 3 1/16 (77.5) 7/16 (11) 1 7/8 (47.5) 4 7/64 (104) 1 /11 32 (33.8) 2 /61 64 (75) 1 /53 64 (46.2) 2 /19 32 (65.5) 65 Appendix - Sharp XG-MB50X-L | PG-MB56X , PG-MB66X Operation Manual - Page 68
29 Red 40 Remote control 13 Remote control sensor 15 Replacing the lamp 52, 53 Resize 32, 41 RESIZE button 32 RETURN button 37 RGB cable 23 RS-232C terminal 26 SCR - ADJ 41 Screen Size and Projection Distance 20 Setup Guide 28, 42 Sharp - Sharp XG-MB50X-L | PG-MB56X , PG-MB66X Operation Manual - Page 69
Appendix MEMO 67 - Sharp XG-MB50X-L | PG-MB56X , PG-MB66X Operation Manual - Page 70
Printed in China TINS-C690WJZZ 06P10-CH-NG
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
 |
 |
Introduction
Quick Start
Setup
Connections
Basic
Operation
Useful
Features
Appendix
MULTIMEDIA PROJECTOR
MODEL
PG-MB66X/PG-MB56X
XG-MB50X-L
XR-11XC-L
XR-10X-L/XR-10S-L
OPERATION MANUAL