Sharp XG-MB50X XG-MB50X Operation Manual

Sharp XG-MB50X Manual

Get Sharp XG-MB50X PDF manuals and user guides View all Sharp XG-MB50X manuals
Add to My Manuals
Save this manual to your list of manuals

Sharp XG-MB50X manual content summary:

  • Sharp XG-MB50X | XG-MB50X Operation Manual - Page 1
    MULTIMEDIA PROJECTOR MODEL XR-20X/XR-20S XG-MB50X/XR-10S OPERATION MANUAL Introduction Quick Start Setup Connections Basic Operation Useful Features Appendix
  • Sharp XG-MB50X | XG-MB50X Operation Manual - Page 2
    IMPORTANT • For your assistance in reporting the loss or theft of your Projector, please record the Model and Serial Number located on the bottom of the projector and retain this information. • Before recycling the packaging, please ensure that you have checked the contents of the carton thoroughly
  • Sharp XG-MB50X | XG-MB50X Operation Manual - Page 3
    to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature projector or the STANDBY button on the remote control. Ensure the cooling fan has stopped before disconnecting the power cord. DURING NORMAL OPERATION, NEVER TURN THE PROJECTOR
  • Sharp XG-MB50X | XG-MB50X Operation Manual - Page 4
    in accordance with the operation manual, may cause harmful interference determined by turning the equipment off and on, the user is encouraged Lamp Replacement See "Replacing the Lamp" on page 50. This SHARP projector uses a DMD panel. This very sophisticated panel contains 786,432 (XR20X/XG-MB50X
  • Sharp XG-MB50X | XG-MB50X Operation Manual - Page 5
    . • In this operation manual, the illustration and the Bright Red Blue CLR Temp Bright Boost Lamp Setting Reset 0 0 0 0 7500K 1 Standard projector. Note .........Indicates additional information for setting up and operating the projector. For Future Reference Maintenance P. 47 Troubleshooting
  • Sharp XG-MB50X | XG-MB50X Operation Manual - Page 6
    the Setup Guide 28 Adjusting the Projected Image 28 Switching the Input Mode 30 Adjusting the Volume 30 Displaying the Black Screen and Turning off the Sound Temporarily 30 Correcting Trapezoidal Distortion ........ 31 Resize Mode 32 Useful Features Operating with the Remote Control .... 34
  • Sharp XG-MB50X | XG-MB50X Operation Manual - Page 7
    Lamp 50 Lamp 50 Caution Concerning the Lamp 50 Replacing the Lamp 50 Removing and Installing the Lamp Unit 51 Resetting the Lamp Timer 52 Connecting Pin Assignments 53 RS-232C Specifications and Command Settings 54 Computer Compatibility Chart 58 Troubleshooting 59 For SHARP Assistance
  • Sharp XG-MB50X | XG-MB50X Operation Manual - Page 8
    the following basic rules for its installation, use and servicing. 1. Read Instructions All the safety and operating instructions should be read before the product is operated. 2. Retain Instructions The safety and operating instructions should be retained for future reference. 3. Heed Warnings All
  • Sharp XG-MB50X | XG-MB50X Operation Manual - Page 9
    instructions. Adjust only those controls that are covered by the operating instructions, as an improper adjustment of other controls service. 19. Replacement Parts When replacement parts are required, be sure the service technician has used replacement produce heat. • DLP\ (Digital Light Processing
  • Sharp XG-MB50X | XG-MB50X Operation Manual - Page 10
    lamp ruptures. In case of lamp rupture, contact your nearest Sharp Authorized Projector Dealer or Service Center for replacement. See "Replacing the Lamp" on page 50. Caution concerning the setup of the projector I For minimal servicing up the projector in places projector I Place the projector
  • Sharp XG-MB50X | XG-MB50X Operation Manual - Page 11
    audio- visual equipment to the projector, make the connections AFTER unplugging the power cord of the projector from the AC outlet and turning off the equipment to be connected. I Please read the operation manuals of the projector and the equipment to be connected for instructions on how to make the
  • Sharp XG-MB50X | XG-MB50X Operation Manual - Page 12
    (15 cm)) I Remote receiver I Lamp unit AN-C3CP2 AN-A1RS AN-MR2 AN-XR20LP (for XR-20X/XR-20S) AN-XR10LP (for XG-MB50X/XR-10S) Note • Some of the optional accessories may not be available depending on the region. Please check with your nearest Sharp Authorized Projector Dealer or Service Center. 10
  • Sharp XG-MB50X | XG-MB50X Operation Manual - Page 13
    this operation manual where the topic is explained. Projector Top View Power indicator 27, 48 STANDBY/ON 27 button For turning the power on and putting the projector into standby For enlarging/ reducing the picture. 15 Remote control sensor Push both sides of the lens cap to attach or remove. 11
  • Sharp XG-MB50X | XG-MB50X Operation Manual - Page 14
    pages in this operation manual where the topic RS-232C terminal Terminal for controlling the projector using a computer. 24 projector has a Kensington Security Standard connector for use with a Kensington MicroSaver Security System. Refer to the information that came with the system for instructions
  • Sharp XG-MB50X | XG-MB50X Operation Manual - Page 15
    manual where the topic is explained. STANDBY button 27 For putting the projector on a computer keyboard when using the optional Remote Receiver (AN-MR2). BREAK TIMER 34 button turning off the sound. PICTURE MODE 34 button For selecting the appropriate picture. 27 ON button For turning
  • Sharp XG-MB50X | XG-MB50X Operation Manual - Page 16
    . • The batteries included with this projector may run down in a short period, depending on how they are kept. Be sure to replace them as soon as possible with new batteries. • Remove the batteries from the remote control if you will not be using the remote control for a long time. • Comply with
  • Sharp XG-MB50X | XG-MB50X Operation Manual - Page 17
    using the remote control • Ensure that you do not drop, expose to mois- ture or high temperature. • The remote control may malfunction under a fluorescent lamp. In this case, move the projector away from the fluorescent lamp. 30° Remote control signal transmitters 30° Remote control sensor 23n
  • Sharp XG-MB50X | XG-MB50X Operation Manual - Page 18
    _P. 18 2. Connect the projector to the computer and plug the power cord into the AC socket of the projector When connecting equipment other than the computer, see pages 24 and 25. _PP. 21-26 3. Remove the lens cap and turn the projector on On the projector On the remote control _P. 27 16
  • Sharp XG-MB50X | XG-MB50X Operation Manual - Page 19
    , press TENTER to finish the Setup Guide. _P. 28 5. Turn the computer on 6. Select the INPUT mode Select the "INPUT 1" using the INPUT button on the projector or C INPUT 1 on the remote control. On the On the remote On-screen display (RGB) projector control • When pressing the INPUT button on
  • Sharp XG-MB50X | XG-MB50X Operation Manual - Page 20
    ". Ceiling-mount Setup I It is recommended that you use the optional Sharp ceiling-mount bracket for this installation. Before mounting the projector, contact your nearest Sharp Authorized Projector Dealer or Service Center to obtain the recommended ceiling-mount bracket (sold separately). • AN
  • Sharp XG-MB50X | XG-MB50X Operation Manual - Page 21
    Projection (PRJ) Mode The projector can use any of the 4 projection modes, shown in the diagram below. Select the mode most appropriate for the projection setting in use. (You can
  • Sharp XG-MB50X | XG-MB50X Operation Manual - Page 22
    Setting up the Projector (Continued) Screen Size and Projection Distance NORMAL Mode (4:3) Picture (Screen) size Diag. [χ] Width Height Projection distance [L] Minimum [L1] Maximum [L2] 300Љ (762 cm) 610 cm (
  • Sharp XG-MB50X | XG-MB50X Operation Manual - Page 23
    video equipment with S-video output terminal (VCR, DVD player, etc.). (See page 24.) RS-232C terminal Connecting the computer to control the projector. (See page 26.) AUDIO OUTPUT terminal Connecting to an amplifier or other audio equipment with an audio cable (commercially available) (Shared
  • Sharp XG-MB50X | XG-MB50X Operation Manual - Page 24
    . Equipment Input Signal Cable Terminal on the projector Computer RGB video RGB cable (supplied) INPUT1, 2 Audio-visual equipment ø3.5 mm stereo audio cable AUDIO INPUT Computer audio (commercially available or available as Sharp service part QCNWGA038WJPZ) Component video 3 RCA to 15
  • Sharp XG-MB50X | XG-MB50X Operation Manual - Page 25
    the projector is unplugged from the AC outlet and turn off the devices to be connected. After making all connections, turn on the projector and keys simultaneously when using a SHARP notebook computer). Refer to the specific instructions in your computer's operation manual to enable your computer's
  • Sharp XG-MB50X | XG-MB50X Operation Manual - Page 26
    Connecting to Video Equipment The projector is equipped with input terminals that support component, S-video, and video component output terminal, use the COMPUTER/ COMPONENT terminal (INPUT1 or INPUT 2) on the projector for video connection. When using a 3 RCA (Component) to 15-pin D-sub cable
  • Sharp XG-MB50X | XG-MB50X Operation Manual - Page 27
    available) Composite video cable (commercially available) Connecting to a Monitor with RGB Input Terminal You can display computer images on both the projector and a separate monitor using two sets of RGB cables. Computer Monitor To INPUT 1 terminal To RGB output terminal To OUTPUT (INPUT
  • Sharp XG-MB50X | XG-MB50X Operation Manual - Page 28
    of the projector. See page 54 for detail. When connecting to a computer using an RS-232C serial control cable and a DIN- D-sub RS-232C adaptor To RS-232C terminal Computer To RS-232C terminal DIN-D-sub RS-232C adaptor* (optional: AN-A1RS) * This adaptor is only supplied with XG-MB50X. RS-232C
  • Sharp XG-MB50X | XG-MB50X Operation Manual - Page 29
    is put into standby mode and immediately turned on again, the lamp may take some time to start projection. STANDBY button ON button Turning the Power off (Putting the Projector into Standby Mode) 1 Press SSTANDBY/ON on the projector or eSTANDBY on the remote control, then press that button again
  • Sharp XG-MB50X | XG-MB50X Operation Manual - Page 30
    Image Projection Setup Guide screen About the Setup Guide After turning on the projector, the Setup Guide screen appears to assist you with projector setup. Guidance items 1 FOCUS 2 HEIGHT ADJUST 3 ZOOM Press TENTER to exit the Setup Guide screen. Note • The Setup Guide screen automatically high-
  • Sharp XG-MB50X | XG-MB50X Operation Manual - Page 31
    can be adjusted using the adjustment feet at the front and rear of the projector. When the screen is above the projector, the projection image can be made higher by adjusting the projector. 1 Lift the projector to adjust its height while lifting the HEIGHT ADJUST lever. 2 Remove your hands from
  • Sharp XG-MB50X | XG-MB50X Operation Manual - Page 32
    the sound from the projector's speaker while the projector is connected to external equipment, set "Speaker" in "PRJ-ADJ" menu to "Off". (See page 43.) On-screen Display Displaying the Black Screen and Turning off the Sound Temporarily Press MAV MUTE on the remote control to temporarily display
  • Sharp XG-MB50X | XG-MB50X Operation Manual - Page 33
    . • The on-screen display of the Keystone Correction mode will disappear. • You can also use d KEYSTONE on the projector. When using XR-20X • The projector automatically detects tilt and the AUTO KEYSTONE feature automatically corrects trapezoidal distortion. Info • While adjusting the image using
  • Sharp XG-MB50X | XG-MB50X Operation Manual - Page 34
    button Computer 4:3 aspect ratio Other aspect ratios SVGA (800 K 600) XGA (1024 K 768) SXGA (1280 K 960) SXGA L (1400 K 1050) SXGA (1280 K 1024) 1280 K 720 NORMAL XR-20X/XG-MB50X XR-20S/10S BORDER STRETCH XR-20X/XG-MB50X XR-20S/10S XR-20X/XG-MB50X XR-20S/10S 1024 K 768 800 K 600 768 K 576
  • Sharp XG-MB50X | XG-MB50X Operation Manual - Page 35
    VIDEO • "STRETCH" is fixed when 540P, 720P or 1080I signals are entered. Input Signal DVD / Video Image type NORMAL Output screen image BORDER STRETCH 4:3 aspect ratio 480I, 480P, 576I, 576P, NTSC, PAL, SECAM Letter box Squeezed 16:9 image Squeezed 4:3 image 540P, 720P, 1080I 16:9
  • Sharp XG-MB50X | XG-MB50X Operation Manual - Page 36
    Operating with the Remote Control Adjustment buttons (P/R/O/Q) BREAK TIMER button FREEZE button PICTURE MODE button AUTO SYNC button Auto Sync (Auto Sync Adjustment) Auto Sync function works when detecting input signal after the projector turns on. Press FAUTO SYNC to manually adjust with Auto
  • Sharp XG-MB50X | XG-MB50X Operation Manual - Page 37
    Sharp CLR Temp Bright Boost Progressive Lamp Setting Reset remote control. *1 Items when inputting RGB signal through INPUT 1 or INPUT 2. *2 Items when inputting component signal through INPUT 1 or INPUT 2, or when selecting INPUT 3 or INPUT 4. *3 Adjustment range for XR-20X/XG-MB50X Setup Guide [On
  • Sharp XG-MB50X | XG-MB50X Operation Manual - Page 38
    ] Page 43 RS-232C Page 44 Fan Mode Page 44 System Lock Page 44 Lamp Timer(Life) Page 44 Sub menu 9600 bps 115200 bps Normal High Old Code centered Color is faded or poor Picture is dark The image is distorted Reset all adjustments to default settings SEL. ENTER Help END The items you can set
  • Sharp XG-MB50X | XG-MB50X Operation Manual - Page 39
    Bright". • This operation can also be performed by using the buttons on the projector. 1 Press BMENU. • The "Picture" menu screen for the selected input mode Bright Red Blue CLR Temp Bright Boost Lamp Setting Reset 0 0 0 0 7500K 1 Standard Bright Help SEL./ADJ. ENTER END Useful Features 37
  • Sharp XG-MB50X | XG-MB50X Operation Manual - Page 40
    ADJ PRJ - ADJ Picture Mode Contrast Bright Red Blue CLR Temp Bright Boost Lamp Setting Reset 0 15 0 0 7500K 1 Standard Bright SEL./ADJ. Single ADJ Help END Note • Menu buttons do not function while the projector is operating the "Auto Sync", "Break Time", "FREEZE", or "AV MUTE" functions. 38
  • Sharp XG-MB50X | XG-MB50X Operation Manual - Page 41
    ADJ PRJ - ADJ Help Picture Mode Contrast Bright Color Tint Sharp CLR Temp Bright Boost Progressive Lamp Setting Reset SEL./ADJ. 0 0 0 0 0 7500K 1 Standard retained in memory. Note • You can also press G PICTURE MODE on the remote control to select the picture mode. (See page 34.) • *sRGB is an
  • Sharp XG-MB50X | XG-MB50X Operation Manual - Page 42
    skin tones purplish. For less sharpness. For high fidelity color reproduction selected. • To reset all adjustment items, select "Reset" and press hENTER at 24 frames/second. The projector can convert this film source to general standard purposes. 40 5 Lamp Setting Selectable items Brightness Eco
  • Sharp XG-MB50X | XG-MB50X Operation Manual - Page 43
    Display 5 Background 6 Setup Guide 7 PRJ Mode 8 Language press HRESIZE on the remote control to set the resize Manual Correction Q or P button O or R button O button Q button Useful Features Note • You cannot set this item when "Resize" is set to "Normal". a When using XR-20S, XG-MB50X
  • Sharp XG-MB50X | XG-MB50X Operation Manual - Page 44
    Language Selectable items Logo Blue None Description Sharp logo screen Blue screen - 6 Selecting the Setup Guide Selectable items On Off Description Displaying the Setup Guide when turning the projector on. Not displaying the Setup Guide. The projector can switch the on-screen display language
  • Sharp XG-MB50X | XG-MB50X Operation Manual - Page 45
    by pressing F AUTO SYNC on the remote control. • The Auto Sync adjustment may take some time to complete, depending on the image of the computer connected to the projector. • When the optimum image cannot be achieved with Auto Sync adjustment, use manual adjustments. (See page 46.) Selectable items
  • Sharp XG-MB50X | XG-MB50X Operation Manual - Page 46
    is turned on. We suggest you record the keycode in a safe place where only authorized users have access. Info • If you lose or forget your keycode, contact your nearest Sharp Authorized Projector Dealer or Service Center (see page 61). Even if the product warranty is valid, the keycode reset will
  • Sharp XG-MB50X | XG-MB50X Operation Manual - Page 47
    to lock the operation buttons on the projector. a Locking the Operation Buttons Hold down T ENTER on the projector for about 5 seconds while the projector is being turned on. ROn-screen Display • The keylock function does not affect the operation with the remote control buttons. • You cannot use the
  • Sharp XG-MB50X | XG-MB50X Operation Manual - Page 48
    faded or poor Picture is dark The image is distorted Reset all adjustments to default settings SEL. ENTER END 46 Vertical on the input signal or setting that you have selected. • If the problem is not solved, refer to "Troubleshooting". (see pages 59 and 60) • When selecting "sRGB" in "Picture
  • Sharp XG-MB50X | XG-MB50X Operation Manual - Page 49
    with water Appendix Mild detergent Wax Thinner Info • If you want to clean the air vents during projector operation, be sure to press S STANDBY/ON on the projector or eSTANDBY on the remote control and put the projector into standby mode. After the cooling fan has stopped, clean the vents. 47
  • Sharp XG-MB50X | XG-MB50X Operation Manual - Page 50
    enter standby mode. At this time, the lamp indicator will illuminate in red. I If you try to turn on the projector a fourth time without replacing the lamp, the projector will not turn on. Indicators on the Projector Power indicator Lamp indicator Temperature warning indicator Red on Green on
  • Sharp XG-MB50X | XG-MB50X Operation Manual - Page 51
    AC outlet, and then connect it again. • Carefully replace the lamp. (See page 51.) • Take the projector to your nearest Sharp Authorized Projector Dealer or Service Center (see page 61) for repair. • Please exercise care when replacing the lamp. • Securely install the cover. • If the power indicator
  • Sharp XG-MB50X | XG-MB50X Operation Manual - Page 52
    the instructions described in this section. * If you wish, you may have the lamp replaced at your nearest Sharp Authorized Projector Dealer or Service Center. * If the new lamp does not light after replacement, take your projector to the nearest Sharp Authorized Projector Dealer or Service Center
  • Sharp XG-MB50X | XG-MB50X Operation Manual - Page 53
    remote control to put the projector into standby mode. • Wait until the cooling fan stops. 2 Disconnect the power cord. • Unplug the power cord from the AC socket. • Leave the lamp until it has fully cooled down (about 1 hour). 3 Remove the lamp unit cover. • Turn the projector over. Loosen the user
  • Sharp XG-MB50X | XG-MB50X Operation Manual - Page 54
    user service screw to secure the lamp unit cover. Info • If the lamp unit and lamp unit cover are not correctly installed, the power will not turn on, even if the power cord is connected to the projector. Securing screws 2 1 Resetting the Lamp Timer Reset the lamp timer after replacing the lamp
  • Sharp XG-MB50X | XG-MB50X Operation Manual - Page 55
    ER SG DR RS CS CI Pin No. 1. 2. 3. 4. 5. 6. 7. 8. 9. Signal CD RD SD ER SG DR RS CS CI Note • Depending on the controlling device used, it may be necessary to connect Pin 4 and Pin 6 on the controlling device (e.g. computer). Projector Computer Pin No. Pin No. 4 4 5 5 6 6 53 Appendix
  • Sharp XG-MB50X | XG-MB50X Operation Manual - Page 56
    Problem response (communication error or incorrect command) O K Return code (0DH) E R R Return code (0DH) Info • When controlling the projector using RS-232C commands from a computer, wait for at least 30 seconds after the power has been turned on, and then
  • Sharp XG-MB50X | XG-MB50X Operation Manual - Page 57
    Commands Example: When turning on the projector, make the following setting. Computer P OWR _ _ _ 1 → ← Projector OK CONTROL CONTENTS Power Off Power On Power Status Projector Condition Lamp Status Lamp Power Status Lamp Quantity Lamp Usage Time (Hour) Lamp Life (Percentage) Model Name Check
  • Sharp XG-MB50X | XG-MB50X Operation Manual - Page 58
    RS-232C Specifications and Command Settings (Continued) CONTROL CONTENTS INPUT 1 Picture Mode : Presentation INPUT 1 Picture Mode 30 - ‫؀‬30) INPUT 1 Red (‫؁‬30 - ‫؀‬30) INPUT 1 Blue (‫؁‬30 - ‫؀‬30) INPUT 1 Sharp (‫؁‬30 - ‫؀‬30) INPUT 1 CLR Temp *2 INPUT 1 Bright Boost (0 - 2) INPUT 1 Progressive :
  • Sharp XG-MB50X | XG-MB50X Operation Manual - Page 59
    CONTROL CONTENTS COMMAND PARAMETER Power ON INPUT 4 Sharp (‫؁‬30 - ‫؀‬30 Reset Auto Sync : Off Auto Sync : On Internal Speaker : Off Internal Speaker : On Image Shift (‫؁‬96 - ‫؀‬96 (XGA Blue Background Selection : None Lamp Setting : Bright Lamp Setting : Eco‫؀‬Quiet Setup Guide : Off Setup Guide
  • Sharp XG-MB50X | XG-MB50X Operation Manual - Page 60
    signals below in intelligent compression XR-20X/XG-MB50X: SXGA, SXGA+ XR-20S/XR-10S: XGA, SXGA, SXGA+ • Intelligent Compression and Expansion System resizing technology The following is a list of modes that conform to VESA. However, this projector supports other signals that are not VESA standards
  • Sharp XG-MB50X | XG-MB50X Operation Manual - Page 61
    Troubleshooting Problem Check Page • Projector power cord is not plugged into the wall outlet. • Power to the external connected devices is off. • The selected input mode is wrong. • Cables incorrectly connected to the projector. • Remote control battery has run out. No picture and no sound
  • Sharp XG-MB50X | XG-MB50X Operation Manual - Page 62
    Troubleshooting (Continued) Problem Check Page Picture is green on • Change the projector increases, the cooling fan noisy. runs faster. The lamp does not light • The lamp indicator is illuminating in red. up even after the Replace the lamp. projector turns on. The lamp suddenly turns
  • Sharp XG-MB50X | XG-MB50X Operation Manual - Page 63
    If you encounter any problems during setup or operation of this projector, first refer to the "Troubleshooting" section on pages 59 and 60. If this operation manual does not answer your question, please contact the SHARP Service departments listed below. U.S.A. Sharp Electronics Corporation 1-888
  • Sharp XG-MB50X | XG-MB50X Operation Manual - Page 64
    including adjustment foot and projecting parts) Weight (approx.) 8.6 lbs. (3.9 kg) Replacement parts Remote control, Power cord, RGB cable, DIN-D-sub RS-232C adaptor, Operation manual As a part of policy of continuous improvement, SHARP reserves the right to make design and specification changes for
  • Sharp XG-MB50X | XG-MB50X Operation Manual - Page 65
    Dimensions Units: inches (mm) 13 64/ (5) 11 1/32 (280) 23 64/ (9) 7/16 (11) 4 19 64/ (109) 2 7/8 (73) 1 55 64/ (47) ø9 7/64 (69.2) 3 5/32 (80) 12 /13 32 (315) 3 1/16 (77.5) 7/16 (11) 1 7/8 (47.5) 4 7/64 (104) 1 /11 32 (33.8) 2 /61 64 (75) 1 /53 64 (46.2) 2 /19 32 (65.5) 63 Appendix
  • Sharp XG-MB50X | XG-MB50X Operation Manual - Page 66
    29 Red 40 Remote control 13 Remote control sensor 15 Replacing the lamp 50, 51 Resize 32, 41 RESIZE button 32 RETURN button 37 RGB cable 23 OUTPUT (INPUT1, 2) terminal 25 RS-232C terminal 26 SCR - ADJ 41 Screen Size and Projection Distance 20 Setup Guide 28, 42 Sharp 40 Speaker 43
  • Sharp XG-MB50X | XG-MB50X Operation Manual - Page 67
    from Warranty Coverage (if any): XR-10S / XG-MB50X / XR-20S / XR-20X Multimedia Projector (Be sure to have this information available when you need service for your Product.) Three (3) years parts and labor from date of purchase except for the Projector Lamp for which the warranty period is ninety
  • Sharp XG-MB50X | XG-MB50X Operation Manual - Page 68
    SHARP CORPORATION Printed in China TINS-C132WJZZ 05P09-CH-NG
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
MULTIMEDIA PROJECTOR
MODEL
XR-20X/XR-20S
XG-MB50X/XR-10S
OPERATION MANUAL
Introduction
Quick Start
Setup
Connections
Basic
Operation
Useful
Features
Appendix