Sharp XG-MB67X XG-MB67X Operation Manual

Sharp XG-MB67X Manual

Get Sharp XG-MB67X PDF manuals and user guides View all Sharp XG-MB67X manuals
Add to My Manuals
Save this manual to your list of manuals

Sharp XG-MB67X manual content summary:

  • Sharp XG-MB67X | XG-MB67X Operation Manual - Page 1
    MULTIMEDIA PROJECTOR MODEL XG-MB67X OPERATION MANUAL Introduction Quick Start Setup Connections Basic Operation Useful Features Appendix
  • Sharp XG-MB67X | XG-MB67X Operation Manual - Page 2
    Model No.: Serial No.: SPECIAL NOTE FOR USERS IN THE U.K. The mains lead of this product is fitted with a non-rewireable (moulded) plug incorporating a 10A fuse. Should the fuse need to be replaced and fit an appropriate type. DANGER: The fuse lead, follow the instructions below: WARNING: THIS
  • Sharp XG-MB67X | XG-MB67X Operation Manual - Page 3
    iii
  • Sharp XG-MB67X | XG-MB67X Operation Manual - Page 4
    , German, French, Swedish, Spanish, Italian, Dutch, Portuguese, Chinese and Korean. Carefully read through the operation instructions before operating the projector. Die mitgelieferte CD-ROM enthält Bedienungsanleitungen in Englisch, Deutsch, Französisch, Schwedisch, Spanisch, Italienisch, Niederl
  • Sharp XG-MB67X | XG-MB67X Operation Manual - Page 5
    moisture. See bottom of projector. CAUTION RISK OF ELECTRIC SHOCK. DO NOT REMOVE SCREWS EXCEPT SPECIFIED USER SERVICE SCREW. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER. NO USER-SERVICEABLE PARTS EXCEPT LAMP UNIT. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning
  • Sharp XG-MB67X | XG-MB67X Operation Manual - Page 6
    button on the remote control. Ensure the cooling fan has stopped before disconnecting the power cord. DURING NORMAL OPERATION, NEVER TURN THE PROJECTOR OFF BY DISCONNECTING THE POWER CORD. FAILURE TO OBSERVE THIS WILL RESULT IN PREMATURE LAMP FAILURE. PRODUCT DISPOSAL This projector utilizes tin
  • Sharp XG-MB67X | XG-MB67X Operation Manual - Page 7
    Manual • In this operation manual Mode Contrast Bright Red Blue CLR Temp Bright Boost Lamp Setting Reset 0 0 0 0 8500K 1 Net. Standard projector. Note .........Indicates additional information for setting up and operating the projector. For Future Reference Maintenance P. 52 Troubleshooting
  • Sharp XG-MB67X | XG-MB67X Operation Manual - Page 8
    Controlling the Projector by a Computer .. 26 Connecting the Power Cord 27 Using Basic Operation Turning the Projector On/Off 28 Turning the Projector on 28 Turning the Power off (Putting the Projector into Standby Mode 29 Image Projection 30 About the Setup Guide Progressive 43 Lamp Setting
  • Sharp XG-MB67X | XG-MB67X Operation Manual - Page 9
    Indicators 53 Regarding the Lamp 55 Lamp 55 Caution Concerning the Lamp 55 Replacing the Lamp 55 Removing and Installing the Lamp Unit 56 Resetting the Lamp Timer 57 Computer Compatibility Chart 58 Troubleshooting 59 For SHARP Assistance 61 Specifications 62 Dimensions 63 Index
  • Sharp XG-MB67X | XG-MB67X Operation Manual - Page 10
    servicing. 1. Read Instructions All the safety and operating instructions should be read before the product is operated. 2. Retain Instructions The safety and operating instructions instructions have been adhered to. 11. Power Sources This product should be operated only from the type of power
  • Sharp XG-MB67X | XG-MB67X Operation Manual - Page 11
    : a. When the power-supply cord or plug is damaged. b. If liquid has been spilled, or objects have fallen into the product. c. If the product has been exposed to rain or water. d. If the product does not operate normally by following the operating instructions. Adjust only those controls that are
  • Sharp XG-MB67X | XG-MB67X Operation Manual - Page 12
    of glass par- ticles if lamp ruptures. In case of lamp rupture, contact your nearest Sharp Authorized Projector Dealer or Service Center for replacement. See "Replacing the Lamp" on page 55. Caution concerning the setup of the projector I For minimal servicing and to maintain high image quality
  • Sharp XG-MB67X | XG-MB67X Operation Manual - Page 13
    and turning off the equipment to be connected. I Please read the operation manuals of the projector and the equipment to be connected for instructions on how to make the connections. Using the projector in other countries I The power supply voltage and the shape of the plug may vary depending on
  • Sharp XG-MB67X | XG-MB67X Operation Manual - Page 14
    to the "SETUP MANUAL" contained on the supplied CD-ROM for details. Connecting Pin Assignments 2 RS-232C Specifications and Commands 3 Setting up the Projector Network Environment 7 Controlling the Projector via LAN 13 Setting up the Projector Using RS-232C or Telnet 18 Troubleshooting 28 10
  • Sharp XG-MB67X | XG-MB67X Operation Manual - Page 15
    I Dust filter I 3 RCA to 15-pin D-sub cable (10n (3.0 m)) I Remote receiver I Lamp unit AN-DF1 AN-C3CP2 AN-MR2 AN-XR20LP Note • Some of the optional accessories may not be available depending on the region. Please check with your nearest Sharp Authorized Projector Dealer or Service Center. 11
  • Sharp XG-MB67X | XG-MB67X Operation Manual - Page 16
    operation manual where the topic is explained. Projector Top View Power indicator 29, 53 STANDBY/ 28, 29 ON button For turning the power on and putting the projector into standby For enlarging/ reducing the picture. 15 Remote control sensor Push both sides of the lens cap to attach or remove.
  • Sharp XG-MB67X | XG-MB67X Operation Manual - Page 17
    this operation manual where the topic is explained. Rear View Terminals Power cord. Using the Kensington Lock • This projector has a Kensington Security Standard connector for use with a Kensington MicroSaver Security System. Refer to the information that came with the system for instructions
  • Sharp XG-MB67X | XG-MB67X Operation Manual - Page 18
    this operation manual where the topic is explained. STANDBY button 29 For putting the projector into the keys on a computer keyboard when using the optional Remote Receiver (AN-MR2). BREAK TIMER button 36 For picture. 28 ON button For turning the power on. 40 MENU/HELP button For displaying
  • Sharp XG-MB67X | XG-MB67X Operation Manual - Page 19
    When using the remote control • Ensure that you do not drop it or expose it to moisture or high temperature. • The remote control may malfunction under a fluorescent lamp. In this case, move the projector away from the fluorescent lamp. Remote control sensor 30° Remote control signal transmitters
  • Sharp XG-MB67X | XG-MB67X Operation Manual - Page 20
    screen _P. 18 2. Connect the projector to the computer and plug the power cord into the AC socket of the projector When connecting equipment other than a computer, see pages 24 and 25. _PP. 21-27 3. Remove the lens cap and turn the projector on On the projector On the remote control _P. 28 16
  • Sharp XG-MB67X | XG-MB67X Operation Manual - Page 21
    STANDBY/ON button on the projector or the STANDBY button on the remote control, and then press the button again while the confirmation message is displayed to put the projector into standby mode. On the On the remote projector control On-screen Display • Unplug the power cord from the AC outlet
  • Sharp XG-MB67X | XG-MB67X Operation Manual - Page 22
    ". Ceiling-mount Setup I It is recommended that you use the optional Sharp ceiling-mount bracket for this installation. Before mounting the projector, contact your nearest Sharp Authorized Projector Dealer or Service Center to obtain the recommended ceiling-mount bracket (sold separately). • AN
  • Sharp XG-MB67X | XG-MB67X Operation Manual - Page 23
    Projection (PRJ) Mode The projector can use any of the 4 projection modes shown in the diagram item © "Ceiling + Front" I Ceiling mounted, rear projection (with a translucent screen) Menu item © "Rear" Menu item © "Ceiling + Rear" Indication of the Projection Image Size and Projection Distance
  • Sharp XG-MB67X | XG-MB67X Operation Manual - Page 24
    Setting up the Projector (Continued) Screen Size and Projection Distance NORMAL Mode (4:3) Picture (Screen) size Diag. [χ] Width Height Projection distance [L] Distance from the lens center Minimum [L1] Maximum [L2]
  • Sharp XG-MB67X | XG-MB67X Operation Manual - Page 25
    terminal for INPUT 3 and 4). (See pages 24 and 25.) Rear View Connections INPUT 3 terminal Connecting video equipment with S-video output to connect to this terminal. RS-232C terminal Connecting the computer to control the projector. (See page 26.) LAN terminal (10 BASE-T/100 BASE-TX) Connecting
  • Sharp XG-MB67X | XG-MB67X Operation Manual - Page 26
    Input Signal Cable Terminal on the projector Computer RGB video RGB cable (supplied) INPUT1, 2 Audio-visual equipment ø3.5 mm stereo audio cable AUDIO INPUT Computer audio (commercially available or available as Sharp service part QCNWGA038WJPZ) Component video 3 RCA (Component
  • Sharp XG-MB67X | XG-MB67X Operation Manual - Page 27
    power cord of the projector is unplugged from the AC outlet and turn off the devices to be connected. After making all connections, turn on the projector when using a SHARP notebook computer). Refer to the specific instructions in your computer's operation manual to enable your computer
  • Sharp XG-MB67X | XG-MB67X Operation Manual - Page 28
    Connecting to Video Equipment The projector is equipped with input terminals that support component, S-video, and video component output terminal, use the COMPUTER/ COMPONENT terminal (INPUT1 or INPUT 2) on the projector for video connection. When using a 3 RCA (Component) to 15-pin D-sub cable
  • Sharp XG-MB67X | XG-MB67X Operation Manual - Page 29
    available) Composite video cable (commercially available) Connecting to a Monitor with RGB Input Terminal You can display computer images on both the projector and a separate monitor using two sets of RGB cables. Computer Monitor To INPUT 1 terminal To RGB output terminal To OUTPUT (INPUT
  • Sharp XG-MB67X | XG-MB67X Operation Manual - Page 30
    a computer with a DIN-D-sub RS232C adaptor and an RS-232C serial control cable (cross type, commercially available), the computer can be used to control the projector and check the status of the projector. Refer to the "SETUP MANUAL" contained on the supplied CD-ROM for details. When connecting to
  • Sharp XG-MB67X | XG-MB67X Operation Manual - Page 31
    to a computer, use a cross-over Category 5 (CAT.5) type cable (commercially available). Connecting the Power Cord Plug the supplied power cord into the AC socket on the rear of the projector. Then plug into AC outlet. Supplied accessory Power cord Connections AC socket To AC outlet 27
  • Sharp XG-MB67X | XG-MB67X Operation Manual - Page 32
    down. Red:The lamp is shut down abnormally or the lamp should be replaced. • When switching on the projector, a slight flickering of the image may be experienced within the first minute after the lamp has been illuminated. This is normal operation as the lamp's control circuitry is stabilising the
  • Sharp XG-MB67X | XG-MB67X Operation Manual - Page 33
    /ON on the projector or eSTANDBY on the remote control, then press that button again while the confirmation message is displayed, to put the projector into standby mode. 2 Unplug the power cord from the AC outlet after the cooling fan stops. • The power indicator on the projector blinks in green
  • Sharp XG-MB67X | XG-MB67X Operation Manual - Page 34
    Image Projection Setup Guide screen About the Setup Guide After turning on the projector, the Setup Guide screen appears to assist you with projector setup. Guidance items 1 FOCUS 2 HEIGHT ADJUST 3 ZOOM Press TENTER to exit the Setup Guide screen. Note • The Setup Guide screen automatically high-
  • Sharp XG-MB67X | XG-MB67X Operation Manual - Page 35
    has been finely adjusted. • The angle of projection is adjustable up to 8 degrees from the surface on which the projector is placed. 3 Use the rear adjustment foot to make the projector level. • The projector is adjustable ±1 degree from the standard position. Note • When adjusting the height of the
  • Sharp XG-MB67X | XG-MB67X Operation Manual - Page 36
    the appropriate input mode for the connected equipment. PressC INPUT 1, C INPUT 2, DINPUT 3 or EINPUT 4 on the remote control to select the input mode. • When pressing INPUT (P/R) on the projector, input mode switches in the following order: INPUT1 INPUT2 INPUT3 INPUT4 . • When "Auto Search" is set
  • Sharp XG-MB67X | XG-MB67X Operation Manual - Page 37
    g KEYSTONE to enter the Keystone Correction mode. • You can also display the on-screen display of the Keystone Correction mode with d KEYSTONE on the projector. 2 Press P/Q or O/R to adjust the Keystone Correction. • You can also adjust the Keystone Correction using the adjustment buttons on the
  • Sharp XG-MB67X | XG-MB67X Operation Manual - Page 38
    aspect ratios SVGA (800 K 600) XGA (1024 K 768) SXGA (1280 K 960) SXGA L (1400 K 1050) SXGA (1280 K 1024) 1280 K 720 Input Signal Computer Image type NORMAL 1024 K 768 1024 K 768 J NORMAL BORDER 768 K 576 768 K 576 J Output screen image BORDER STRETCH 1024 K 576 1024 K 576 1024 K 576 STRETCH
  • Sharp XG-MB67X | XG-MB67X Operation Manual - Page 39
    VIDEO • "STRETCH" is fixed when 540P, 720P or 1080I signals are entered. Input Signal DVD / Video Image type NORMAL Output screen image BORDER STRETCH 4:3 aspect ratio 480I, 480P, 576I, 576P, NTSC, PAL, SECAM Letter box Squeezed 16:9 image Squeezed 4:3 image 540P, 720P, 1080I
  • Sharp XG-MB67X | XG-MB67X Operation Manual - Page 40
    Operating with the Remote Control Adjustment buttons (P/R/O/Q) BREAK TIMER button FREEZE button PICTURE MODE button AUTO SYNC button Auto Sync (Auto Sync Adjustment) Auto Sync function works when detecting input signal after the projector turns on. Press FAUTO SYNC to manually adjust with Auto
  • Sharp XG-MB67X | XG-MB67X Operation Manual - Page 41
    Tint Sharp CLR Temp Bright Boost Progressive Lamp Setting Reset SEL Guide PRJ Mode Language Net. Normal Off On Logo On Front English Help Main menu SCR - ADJ Page 44 SEL./ADJ. ENTER END • You can adjust the menu items with icons ( , , and ) using the respective buttons on the remote control
  • Sharp XG-MB67X | XG-MB67X Operation Manual - Page 42
    47 System Lock Page 47 Lamp Timer(Life) Page 47 Sub menu 9600 bps 115200 bps Normal High Old Code New Code Reconfirm "Network" menu Pict. SCR PRJ Password Network Disable Help DHCP Client On TCP/IP MAC Address 0 8 : 0 0 : 1 F : B 1 : B 7 : 7 4 Projector XG-MB67X SEL./ADJ. ENTER END
  • Sharp XG-MB67X | XG-MB67X Operation Manual - Page 43
    Color is faded or poor Picture is dark The image is distorted Reset all adjustments to default settings SEL. ENTER Help END The items you not centered Auto Sync H-Pos V-Pos • Color is faded or poor INPUT 1 or INPUT 2 Signal type: Auto/RGB/Component INPUT 3 or INPUT 4 Video System: A u t o / P A
  • Sharp XG-MB67X | XG-MB67X Operation Manual - Page 44
    "Bright". • This operation can also be performed by using the buttons on the projector. 1 Press BMENU. • The "Picture" menu screen for the selected input mode Contrast Bright Red Blue CLR Temp Bright Boost Lamp Setting Reset 0 0 0 0 8500K 1 Net. Standard Bright Help SEL./ADJ. ENTER END 40
  • Sharp XG-MB67X | XG-MB67X Operation Manual - Page 45
    SCR PRJ Picture Mode Contrast Bright Red Blue CLR Temp Bright Boost Lamp Setting Reset 0 15 0 0 8500K 1 Net. Standard Bright SEL./ADJ. Single ADJ Help END Useful Features Note • Menu buttons do not function while the projector is operating the "Auto Sync", "Break Time", "FREEZE", or "AV MUTE
  • Sharp XG-MB67X | XG-MB67X Operation Manual - Page 46
    PRJ Net. Help Picture Mode Contrast Bright Color Tint Sharp CLR Temp Bright Boost Progressive Lamp Setting Reset SEL./ADJ. 0 0 0 0 0 8500K 1 retained in memory. Note • You can also press G PICTURE MODE on the remote control to select the picture mode. (See page 36.) • *sRGB is an international
  • Sharp XG-MB67X | XG-MB67X Operation Manual - Page 47
    For less sharpness. For reset all adjustment items, select "Reset second. The projector can convert Power consumption (When using AC 110V) 308W 385W Lamp Life Approx. 3,000 hours Approx. 2,000 hours Note • When "Lamp Setting" is set to "Eco+Quiet", the power consumption will decrease and the lamp
  • Sharp XG-MB67X | XG-MB67X Operation Manual - Page 48
    0 3 Auto Keystone 4 OSD Display 5 Background 6 Setup Guide 7 PRJ Mode 8 Language Net. Normal Off On Logo On and 35. • You can also press HRESIZE on the remote control to set the resize mode. (See page 34.) "SCR - ADJ" menu to "On". For Manual Keystone Correction Set "Auto Keystone" on the "SCR
  • Sharp XG-MB67X | XG-MB67X Operation Manual - Page 49
    items Front Ceiling + Front Rear Ceiling + Rear Description Normal image (Projected from Sharp logo screen Blue screen - 6 Selecting the Setup Guide Selectable items On Off Description Displaying the Setup Guide when turning the projector on. Not displaying the Setup Guide. The projector
  • Sharp XG-MB67X | XG-MB67X Operation Manual - Page 50
    on the remote control. • The Auto Sync adjustment may take some time to complete, depending on the image of the computer connected to the projector. • When the optimum image cannot be achieved with Auto Sync adjustment, use manual adjustments. (See page 51.) 3 Auto Power Off Function Selectable
  • Sharp XG-MB67X | XG-MB67X Operation Manual - Page 51
    the keycode in a safe place where only authorized users have access. Info • If you lose or forget your keycode, contact your nearest Sharp Authorized Projector Dealer or Service Center (see page 61). Even if the product warranty is valid, the keycode reset will incur a charge. a Setting/Changing the
  • Sharp XG-MB67X | XG-MB67X Operation Manual - Page 52
    does not affect the operation with the remote control buttons. • You cannot use the keylock function while the projector is warming up. a Taking the Keylock off Hold down T ENTER on the projector for about 5 seconds. ROn-screen Display • When the projector is in standby mode, you can release
  • Sharp XG-MB67X | XG-MB67X Operation Manual - Page 53
    F : B 1 : B 7 : 7 4 Projector XG-MB67X SEL./ADJ. ENTER END 1 Setting a Password If you projector, press S→T→S→T→S→T→U. Note • If TENTER is held down for more than 5 seconds, the operation buttons on the projector will be locked. (See page 48.) • You cannot use the buttons on the remote control
  • Sharp XG-MB67X | XG-MB67X Operation Manual - Page 54
    is displayed. The projector name is displayed. (Factory preset : XG-MB67X) 4 Enter "Subnet Mask" using P, R, Q and O, then press hENTER. 5 Enter "Gateway" using P, R, Q and O, then press hENTER. Note • For information on how to change the projector name, see "SETUP MANUAL" contained in the
  • Sharp XG-MB67X | XG-MB67X Operation Manual - Page 55
    selected. • If the problem is not solved, refer to "Troubleshooting". (See pages 59 and 60.) • When selecting "sRGB" in "Picture Mode", the item "Color is faded or poor" is not displayed. This means you cannot change input signal types. • When you select "Reset
  • Sharp XG-MB67X | XG-MB67X Operation Manual - Page 56
    Mild detergent diluted with water Wax Thinner 52 Info • If you want to clean the air vents during projector operation, be sure to press S STANDBY/ON on the projector or eSTANDBY on the remote control and put the projector into standby mode. After the cooling fan has stopped, clean the vents.
  • Sharp XG-MB67X | XG-MB67X Operation Manual - Page 57
    indicator will illuminate in red. I If you try to turn on the projector a fourth time without replacing the lamp, the projector will not turn on. Indicators on the Projector Power indicator Lamp indicator Temperature warning indicator Red on Green on Red blinks Green blinks Green on Green blinks
  • Sharp XG-MB67X | XG-MB67X Operation Manual - Page 58
    connect it again. • Carefully replace the lamp. (See page 56.) • Take the projector to your nearest Sharp Authorized Projector Dealer or Service Center (see page 61) for repair. • Please exercise care when replacing the lamp. • Securely install the cover. • If the power indicator blinks in red even
  • Sharp XG-MB67X | XG-MB67X Operation Manual - Page 59
    the instructions described in this section. * If you wish, you may have the lamp replaced at your nearest Sharp Authorized Projector Dealer or Service Center. * If the new lamp does not light after replacement, take your projector to the nearest Sharp Authorized Projector Dealer or Service Center
  • Sharp XG-MB67X | XG-MB67X Operation Manual - Page 60
    remote control to put the projector into standby mode. • Wait until the cooling fan stops. 2 Disconnect the power cord. • Unplug the power cord from the AC socket. • Leave the lamp until it has fully cooled down (about 1 hour). 3 Remove the lamp unit cover. • Turn the projector over. Loosen the user
  • Sharp XG-MB67X | XG-MB67X Operation Manual - Page 61
    the user service screw to secure the lamp unit cover. Info • If the lamp unit and lamp unit cover are not correctly installed, the power will not turn on, even if the power cord is connected to the projector. Handle Securing screws 2 1 Resetting the Lamp Timer Reset the lamp timer after replacing
  • Sharp XG-MB67X | XG-MB67X Operation Manual - Page 62
    : SXGA, SXGA+ • Intelligent Compression and Expansion System resizing technology The following is a list of modes that conform to VESA. However, this projector supports other signals that are not VESA standards. PC/MAC PC MAC 13" MAC 16" MAC 19" MAC 21" Resolution Horizontal Frequency (kHz
  • Sharp XG-MB67X | XG-MB67X Operation Manual - Page 63
    Troubleshooting Problem Check Page • Projector power cord is not plugged into the wall outlet. • Power to the external connected devices is off. • The selected input mode is wrong. • Cables incorrectly connected to the projector. • Remote control battery has run out. No picture and no sound
  • Sharp XG-MB67X | XG-MB67X Operation Manual - Page 64
    The cooling fan becomes • When temperature inside the projector increases, the cooling fan noisy. runs faster. The lamp does not light • The lamp indicator is illuminating in red. up even after the Replace the lamp. projector turns on. The lamp suddenly turns off during projection. The image
  • Sharp XG-MB67X | XG-MB67X Operation Manual - Page 65
    If you encounter any problems during setup or operation of this projector, first refer to the "Troubleshooting" section on pages 59 and 60. If this operation manual does not answer your question, please contact the SHARP Service departments listed below. U.S.A. Sharp Electronics Corporation 1-888
  • Sharp XG-MB67X | XG-MB67X Operation Manual - Page 66
    Specifications Product type Projector Model XG-MB67X Replacement parts Remote control, Power cord for U.S. and Canada, etc., Power cord for Europe, except U.K., Power cord for U.K. and Singapore, Power cord for Australia, New Zealand and Oceania, RGB cable, DIN-D-sub RS-232C adaptor, Operation manual
  • Sharp XG-MB67X | XG-MB67X Operation Manual - Page 67
    Dimensions Units: inches (mm) 13 64/ (5) 11 1/32 (280) 23 64/ (9) 7/16 (11) 4 19 64/ (109) 2 7/8 (73) 1 55 64/ (47) ø9 7/64 (69.2) 3 5/32 (80) 12 /13 32 (315) 3 1/16 (77.5) 7/16 (11) 1 7/8 (47.5) 4 7/64 (104) 1 /11 32 (33.8) 2 /61 64 (75) 1 /53 64 (46.2) 2 /19 32 (65.5) 63 Appendix
  • Sharp XG-MB67X | XG-MB67X Operation Manual - Page 68
    44 Auto Power Off 46 Rear adjustment foot 31 Red 43 Remote control 14 Remote control sensor 15 Replacing the lamp 55, 56 Resize 34, 44 RESIZE button 34 RETURN button 40 RGB cable 23 RS-232C terminal 26 SCR - ADJ 44 Screen Size and Projection Distance 20 Setup Guide 30, 45 Sharp
  • Sharp XG-MB67X | XG-MB67X Operation Manual - Page 69
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
MULTIMEDIA PROJECTOR
MODEL
XG-MB67X
OPERATION MANUAL
Introduction
Quick Start
Setup
Connections
Basic
Operation
Useful
Features
Appendix