Sharp XG-P560W-N XG-P560W Operation Manual
Sharp XG-P560W-N - WXGA DLP Projector Manual
 |
View all Sharp XG-P560W-N manuals
Add to My Manuals
Save this manual to your list of manuals |
Sharp XG-P560W-N manual content summary:
- Sharp XG-P560W-N | XG-P560W Operation Manual - Page 1
Introduction Quick Start DATA PROJECTOR MODEL XG-P560W (Standard zoom lens attached) XG-P560W-N (No lens attached) OPERATION MANUAL Setup Connections Basic Operation Useful Features Appendix - Sharp XG-P560W-N | XG-P560W Operation Manual - Page 2
projector and retain this information. • Before recycling the packaging, please ensure that you have checked the contents of the carton thoroughly against the list of "Supplied accessories" on page 11. Model No.: Serial No.: SPECIAL NOTE FOR USERS instructions before operating the projector. - Sharp XG-P560W-N | XG-P560W Operation Manual - Page 3
moisture. See side of projector. CAUTION RISK OF ELECTRIC SHOCK. DO NOT REMOVE SCREWS EXCEPT SPECIFIED USER SERVICE SCREW. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER. NO USER-SERVICEABLE PARTS EXCEPT LAMP UNIT. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning - Sharp XG-P560W-N | XG-P560W Operation Manual - Page 4
, or Sharp at 1-800-BE-SHARP. U.S.A. ONLY Caution Concerning Lamp Replacement See "Replacing the Lamp" on page 71. This SHARP projector uses a DLP® chip. This very sophisticated panel contains 1,024,000 pixels (micromirrors). As with any high technology electronic equipment such as large screen TVs - Sharp XG-P560W-N | XG-P560W Operation Manual - Page 5
" menu is not available for VIDEO or S-VIDEO. -47 Info ...........Indicates safeguards when using the projector. Note ........Indicates additional information for setting up and operating the projector. For Future Reference Maintenance Page 66 Troubleshooting Pages 79 and 80 Index Page 83 -3 - Sharp XG-P560W-N | XG-P560W Operation Manual - Page 6
Manual 3 Contents 4 How to Access the PDF Operation Manuals Projector 21 Setting Up the Projector 21 Standard Zoom Lens (AN-P18EZ : Standard Equipment with XG-P560W 22 Projecting a Reversed Image 23 Connections Connecting the Projector to Other Equipment 24 Controlling the Projector - Sharp XG-P560W-N | XG-P560W Operation Manual - Page 7
Indicators 69 Regarding the Lamp 71 Lamp 71 Caution Concerning the Lamp 71 Replacing the Lamp 71 Removing and Installing the Lamp Unit 72 Resetting the Lamp Timer 74 Computer Compatibility Chart 75 Attaching the Optional Lens 77 Troubleshooting 79 For SHARP Assistance 81 Specifications - Sharp XG-P560W-N | XG-P560W Operation Manual - Page 8
to the "SETUP MANUAL" contained on the supplied CD-ROM for details. Setting up the Screen 2 Screen Size and Projection Distance 3 Connecting Pin Assignments 11 Wired Remote Control Terminal Specifications 13 RS-232C Specifications and Commands ... 14 Setting up the Projector Network Environment - Sharp XG-P560W-N | XG-P560W Operation Manual - Page 9
folder. 2) Double click the language (name of the folder) that you want to view. 3) Double click the pdf file to access the projector manuals. When you want to view the setup manual 1) Double click the "SETUP" folder. 2) Double click the language (name of the folder) that you want to view. 3) Double - Sharp XG-P560W-N | XG-P560W Operation Manual - Page 10
the following basic rules for its installation, use and servicing. 1. Read Instructions All the safety and operating instructions should be read before the product is operated. 2. Retain Instructions The safety and operating instructions should be retained for future reference. 3. Heed Warnings All - Sharp XG-P560W-N | XG-P560W Operation Manual - Page 11
operation life of the unit. Internal cleaning should only be performed by a Sharp Authorized Projector Dealer or Service Center. Do not set up the projector in places exposed to direct sunlight or bright light. ■ Position the screen so that it is not in direct sunlight or room light. Light falling - Sharp XG-P560W-N | XG-P560W Operation Manual - Page 12
the AC outlet and turning off the equipment to be connected. ■ Please read the operation manuals of the projector and the equipment to be connected for instructions on how to make the connections. Using the projector in other countries ■ The power supply voltage and the shape of the plug may vary - Sharp XG-P560W-N | XG-P560W Operation Manual - Page 13
Lens cap (Only supplied with XG-P560W) Dustproof cap (Only supplied with XG-P560W-N) • Projector manual and technical reference CD-ROM • Operation manual (this manual check with your nearest Sharp Authorized Projector Dealer or Service Center. -11 - Sharp XG-P560W-N | XG-P560W Operation Manual - Page 14
to XG-P560W. The optional lenses from Sharp are also available for specialized application. Please see your nearest Sharp Authorized Projector Dealer for details on all the lenses. (Refer to the lens operation manual when using a lens.) Throw Distance The graph below is for 100-inch (254 cm) screen - Sharp XG-P560W-N | XG-P560W Operation Manual - Page 15
in this operation manual where the topic is explained. Projector Rear View H&V LENS SHIFT button 30 For shifting the lens horizontally and vertically. switching input mode. 47 MENU button For displaying adjustment and setting screens. 36 Volume buttons For adjusting the speaker sound level. 47 - Sharp XG-P560W-N | XG-P560W Operation Manual - Page 16
Part Names and Functions Numbers in refer to the main pages in this operation manual where the topic is explained. Projector (Rear View) Terminals Refer to "Connecting the Projector to Other Equipment" on pages 24-26. HDMI terminal 24 Terminal for HDMI input. 25 DVI-D input terminals 24 Terminals - Sharp XG-P560W-N | XG-P560W Operation Manual - Page 17
modes. 30 H&V LENS SHIFT button For shifting the lens horizontally and vertically. 47 MENU button For displaying adjustment and setting screens. 18 • 47 the screen size. 38 PICTURE MODE button For switching the picture mode. 17 WIRED R/C JACK For connecting the remote control to the projector when - Sharp XG-P560W-N | XG-P560W Operation Manual - Page 18
depending on the screen material. When using the remote control: • Ensure that you do not drop it or expose it to moisture or high temperature. • The remote control may malfunction under a fluorescent lamp. In this case, move the projector away from the fluorescent lamp. Inserting the Batteries - Sharp XG-P560W-N | XG-P560W Operation Manual - Page 19
WIRED R/C JACK ø3.5 mm minijack cable (commercially available or available as Sharp service part QCNWGA038WJPZ) Note • The wireless remote function is not possible when the ø3.5 mm minijack cable is connected to the projector. Should the wireless remote operation be required, the ø3.5 mm minijack - Sharp XG-P560W-N | XG-P560W Operation Manual - Page 20
this function does not work with the following operation systems that do not support USB. • Versions earlier than Windows® 95. • Versions earlier than Windows connection. • While the remote control is connected to the projector with a signal cable, you cannot use the wireless computer mouse function - Sharp XG-P560W-N | XG-P560W Operation Manual - Page 21
67 46 4 7 1. Place the projector facing a screen Page 21 2. Connect the projector to the computer and plug the power cord into the AC socket of the projector When connecting equipment other than the computer, see pages 25 and 26. 3. Remove the lens cap and turn the projector on Pages 24, 28 - Sharp XG-P560W-N | XG-P560W Operation Manual - Page 22
projector angle: • Shift the lens horizontally and vertically. 1 Press H&V LENS SHIFT on the projector or on the remote control. 2 Press ', ", \ or | on the projector or the remote control. • Adjust the projector " On-screen display • You can unplug the power cord even if the projector is operating - Sharp XG-P560W-N | XG-P560W Operation Manual - Page 23
Setup (Front Projection) ■ Place the projector at the required distance from the screen according to the desired picture size. (For details, refer to "SETUP MANUAL" contained on the supplied CD-ROM.) Side View H1 Screen Center of screen Lens center Lower lens shift position (High mount setup - Sharp XG-P560W-N | XG-P560W Operation Manual - Page 24
Setting Up the Projector Standard Zoom Lens (AN-P18EZ : Standard Equipment with XG-P560W) F2.5, f=25.5-32 mm 16:10 Signal Input (Normal Mode) Picture (Screen) size Projection distance [L] Distance from the lens center to the bottom of the image [H] Diag. [χ] Width Height Minimum [L1] - Sharp XG-P560W-N | XG-P560W Operation Manual - Page 25
. Ceiling-mount Setup ■ It is recommended that you use the optional Sharp ceiling-mount adaptor and unit for this installation. Before mounting the projector, contact your nearest Sharp Authorized Projector Dealer or Service Center to obtain the recommended ceiling-mount adaptor and unit (sold - Sharp XG-P560W-N | XG-P560W Operation Manual - Page 26
"Computer Compatibility Chart" for a list of computer signals compatible with the projector. Use with computer signals other than those listed may cause some of the when using a SHARP notebook computer). Refer to the specific instructions in your computer's operation manual to enable your computer - Sharp XG-P560W-N | XG-P560W Operation Manual - Page 27
of the DTV decoder connected to this projector. Please refer to the operation manual of the DTV decoder for details. • The HD/C sync terminal of the 5 BNC cable.) • For details on compatibility for connection, see support information on DVI connection provided by the video equipment manufacturer. - Sharp XG-P560W-N | XG-P560W Operation Manual - Page 28
video signal does not degrade when transmitted, and a high-quality image with a simple connection can be enjoyed. • The HDMI terminal does not support the CEC signal. This projector is able to process the following signals when connected to HDMI equipment: • Video signal: For details, see "HDMI - Sharp XG-P560W-N | XG-P560W Operation Manual - Page 29
is connected to the LAN terminal on the computer, the computer can be used to control the projector. Refer to the "SETUP MANUAL" contained on the supplied CD-ROM for details. When connecting to a computer using an RS-232C serial control cable Computer Rear view Connections To RS- - Sharp XG-P560W-N | XG-P560W Operation Manual - Page 30
pages 24-27.) Remove the lens cap and press ON on the projector or on the remote control. • The power indicator illuminates green. • After the lamp indicator illuminates, the projec- tor is ready to start operation. • When System Lock is set, the keycode input screen appears. Enter the right keycode - Sharp XG-P560W-N | XG-P560W Operation Manual - Page 31
of projection angle using the adjustment feet, you can adjust the position of the projection using the lens shift function. This is a useful function in cases such as when the screen cannot be moved. When moving upward or downward Adjustable range When moving in the left and right direction - Sharp XG-P560W-N | XG-P560W Operation Manual - Page 32
so that it is as perpendicular to the screen as possible. 1 Rotate the adjustment feet to adjust the projected angle. • The projector is adjustable up to approximately 5 degrees. Warning! • Do not hold the lens and lens cover when projector angle is adjusted. • Use caution not to pinch your - Sharp XG-P560W-N | XG-P560W Operation Manual - Page 33
up for at least 30 minutes. ZOOM buttons FOCUS buttons Basic Operation Adjusting the Projected Image Size Press ZOOM +/- on the projector or on the remote control to adjust the projected image size. ▼On-screen display Note • After you have pressed FOCUS or ZOOM on the remote control or the - Sharp XG-P560W-N | XG-P560W Operation Manual - Page 34
projected either from the top or from the bottom towards the screen at an angle, the image becomes distorted trapezoidally. The function KEYSTONE button Select the type of the keystone correction. Press KEYSTONE on the projector or on the remote control. • "GEOMETRIC ADJUSTMENT" will be displayed. - Sharp XG-P560W-N | XG-P560W Operation Manual - Page 35
below to ad- just the position, size or focus of the projected image. • Match screen's four sides to green test pattern. • Pressing ', ", \ or | on the projector or H&V LENS SHIFT on the remote control allows you to shift the lens. • Pressing ZOOM +/- on the projector or on the remote control allows - Sharp XG-P560W-N | XG-P560W Operation Manual - Page 36
before "H&V KEYSTONE" is displayed, and then reset. 2 Press ' or " to parallelize the left and right sides of the projected image. ▼On-screen display Vertical Keystone Correction (Adjustment with ' / ") 3 Press \ or | to parallelize the upper and lower sides of the projected image. Horizontal - Sharp XG-P560W-N | XG-P560W Operation Manual - Page 37
5 Press ', ", \ or | to correct the image distortion. IMAGE RESIZING (Adjustment with 6 Press KEYSTONE to set the position. Basic Operation -35 - Sharp XG-P560W-N | XG-P560W Operation Manual - Page 38
When no signal is received, "NO SIGNAL" will be displayed. When non-supported signal is received, "NOT REG." is displayed. • The input mode cannot be adjusted on the projector. The audio volume buttons will instead function as location shift button for the smaller screen. -36 '/" buttons COMPUTER1 - Sharp XG-P560W-N | XG-P560W Operation Manual - Page 39
Pressing MUTE again will turn the sound back on. MUTE button "On-screen display Displaying an Enlarged Portion of an Image Graphs, tables and other to ×1. Note In the following cases, the image will return to the normal size (×1). - When switching the input mode. - When UNDO has been pressed. - - Sharp XG-P560W-N | XG-P560W Operation Manual - Page 40
Image Projection Freezing a Moving Image 1 Press FREEZE on the remote control. • The projected image is frozen. 2 Press FREEZE again to return to the moving image from the currently connected equipment. Selecting the Picture Mode You can select the suitable picture mode for the projected image, such - Sharp XG-P560W-N | XG-P560W Operation Manual - Page 41
1280 × 800 NORMAL FULL 1280 × 800 - DOT BY DOT 800 × 600 1024 × 768 1152 × 864 1400 × 1050 1280 × 1024 - 1360 × 768 1366 × 768 - Output screen image FULL DOT BY DOT STRETCH 1280 × 720 - 1280 × 720 STRETCH *1 *3 SXGA (1280 ´ 1024) 5:4 aspect ratio 1280 ´ 720 *1 1360 ´ 768 1366 ´ 768 16 - Sharp XG-P560W-N | XG-P560W Operation Manual - Page 42
Projection VIDEO/DTV Input signal Video/DTV Image Type NORMAL Output screen image AREA ZOOM V-STRETCH STRETCH SMART STRETCH *1 *1 480I, Same as NORMAL mode. *3 No support mode. About Copyrights • When using the RESIZE function to select an image size with a different aspect ratio to a - Sharp XG-P560W-N | XG-P560W Operation Manual - Page 43
When no input signal is detected for more than 15 minutes, the projector will automatically enter the standby mode if the break timer has elapsed. The break timer will be displayed on the startup image. To change the screen displayed during the break timer, change the setting of "Startup Image" (see - Sharp XG-P560W-N | XG-P560W Operation Manual - Page 44
projector. "Picture" menu COMPUTER1/2, DVI, HDMI Main Menu Picture Page 49 Sub Menu Picture Mode Page 49 Contrast -30 +30 Bright -30 Color -30 Tint -30 Red -30 Green -30 Blue -30 Sharp M. S. Adjustment" is set to "sRGB". *2 "Sharp" can be adjusted only when 480I, 480P, 540P, 576I - Sharp XG-P560W-N | XG-P560W Operation Manual - Page 45
Picture Mode Page 49 Contrast Bright Color Tint -30 +30 -30 +30 -30 +30 -30 +30 Red Green -30 +30 -30 +30 Blue -30 +30 Sharp -30 +30 Page 49 CLR Temp Page 50 Progressive Page 50 C.M.S. Adjustment Page 52 DNR Page 50 Reset Page 49 Standard Presentation Movie Custom 4500K - Sharp XG-P560W-N | XG-P560W Operation Manual - Page 46
Menu Items "C.M.S." menu Main Menu C.M.S. Page 52 Sub Menu C.M.S. Adjustment Page 52 Target Page 52 Lightness -30 +30 Page 52 Chroma -30 +30 Page 52 Hue -30 +30 Page 52 Reset (This Color) Page 52 Reset (All Colors) Page 52 View Settings Page 52 Standard Custom 1 Custom 2 Custom 3 sRGB - Sharp XG-P560W-N | XG-P560W Operation Manual - Page 47
"Audio" menu Main Menu Audio Page 55 Sub Menu Balance -30 +30 Treble -30 +30 Bass -30 +30 Reset -30 +30 Page 55 Audio Out FAO Page 55 VAO Speaker On Page 55 Off "Options 1" menu Main Menu Sub Menu Options 1 Page 56 Pict in Pict Page 56 *8 On Off Resize Page 56 Normal *9 - Sharp XG-P560W-N | XG-P560W Operation Manual - Page 48
2 Page 61 Sub Menu Password Page 61 Lamp Mode Page 62 Lens Type Page 62 PRJ Mode Page 62 Stack Setting Out Page 64 LAN/RS232C Page 64 Network Page 64 Service Mode Page 65 All Reset Page 65 Old Password New Password Reconfirm Both Lamps Lamp 1 Only Lamp 2 Only Equal Use Type 1 Type 2 Type 3 - Sharp XG-P560W-N | XG-P560W Operation Manual - Page 49
button Menu Selections • This operation can also be performed by using the buttons on the projector. 1 Press MENU. • The "Picture" menu screen for the selected input mode is displayed. Example: "Picture" screen menu for COMPUTER1 (RGB) mode 2 Press \ or | to display the other menu items. Menu - Sharp XG-P560W-N | XG-P560W Operation Manual - Page 50
") will be displayed. Single adjustment item Note • Press UNDO to return to the previous screen. 4 Press \ or | to adjust the item selected. • The adjustment is stored. 5 Press MENU. • The menu screen will disappear. Example 2: Selecting "Signal Type" 3 Press ' or " to select the item you want - Sharp XG-P560W-N | XG-P560W Operation Manual - Page 51
. Custom The factory preset value is the same as the one of "Standard". Using the dedicated software "Sharp Gamma Manager" allows you to adjust the gamma curve. Visit "http://sharp-world.com/projector/" for details. Note • You can also press PICTURE MODE on the remote control to select the - Sharp XG-P560W-N | XG-P560W Operation Manual - Page 52
SECAM) enhancement to progressive mode images. * The film source is a digital video recording with the original encoded as is at 24 frames/second. The projector can convert this film source to progressive video at 60 frames/second with NTSC and PAL60Hz or at 50 frames/second with PAL50Hz and SECAM - Sharp XG-P560W-N | XG-P560W Operation Manual - Page 53
. 7 Selecting the Dynamic Range An optimum picture may not be displayed if a DVI-D or HDMI capable device's output signal type and the projector's input signal type do not match. If this should occur, switch the "Dynamic Range"mode. Selectable items Description Auto In most circumstances - Sharp XG-P560W-N | XG-P560W Operation Manual - Page 54
the hue of the selected target color. Press \ Press | For stronger red of the target color For stronger yellow of the target color 6 Resetting User-defined Color Settings This function allows you to reset the specific target color or all of the six colors. Selectable items Description Reset - Sharp XG-P560W-N | XG-P560W Operation Manual - Page 55
horizontal noise (similar to tracking on your VCR). Centers the on-screen image by moving it to the left or right. Centers the on-screen image by moving it up or down. 3 Accessing Adjustment Settings Adjustment settings stored in the projector can be easily accessed. Note • If a memory has not been - Sharp XG-P560W-N | XG-P560W Operation Manual - Page 56
Auto Sync adjustment may take some time to complete, depending on the image of the computer connected to the projector. • When the optimum image cannot be achieved with Auto Sync adjustment, use manual adjustments. (See page 53.) • When AUTO SYNC is pressed while "Auto Sync" is "High Speed" or "Off - Sharp XG-P560W-N | XG-P560W Operation Manual - Page 57
on "Audio Out". Selecting "VAO" synchronizes video and audio automatically. • The HDMI audio will not output from the MONITOR OUT AUDIO terminal when the projector is in the standby mode. 3 Setting the Speaker This function allows you to turn the audio output of the internal speaker on or off when - Sharp XG-P560W-N | XG-P560W Operation Manual - Page 58
you to display two pictures on the same screen. You can display the image input from VIDEO audio of the inset picture will come out of the projector's speakers. • While the "Pict in Pict" function are input to the main picture. −UXGA/SXGA+/SXGA/WXGA signal − 480I/480P/540P/576I/576P/720P/1035I/ - Sharp XG-P560W-N | XG-P560W Operation Manual - Page 59
pressed." are not displayed. Level B All on-screen displays are not displayed (ex- cept the menu, H&V LENS SHIFT, KEY- STONE, FOCUS, ZOOM, "All "All buttons on Projector are locked." regardless of the "OSD Display" setting. Note • Images can be captured only when they are from WXGA (1280 × 800) - Sharp XG-P560W-N | XG-P560W Operation Manual - Page 60
Default image Custom User customized image (e.g. company logo) None Black screen Note • When On", the power consumption will decrease and the lamp life will extend. 0 Detecting the Input detecting the input signal, pressing a button on the projector or the remote control stops the "Auto Search" - Sharp XG-P560W-N | XG-P560W Operation Manual - Page 61
users have access. Info • If you lose or forget your keycode, contact your near- est Sharp Authorized Projector Dealer or Service LENS SHIFT • System Lock function recognizes each button on the remote control or on the projector input screen when turning the projector on • Press " on the projector for - Sharp XG-P560W-N | XG-P560W Operation Manual - Page 62
you have set the system lock, enter the keycode and follow the procedure below to release the system lock. ▼Input screen for keycode 1 Press the 4 buttons on the remote control or on the projector to enter the preset keycode in "Old Code". 2 Press the 4 buttons on the remote control or on the - Sharp XG-P560W-N | XG-P560W Operation Manual - Page 63
password settings, press UNDO. If You Forget Your Password If you forget the password, delete it using the following procedure and set a new password. Press projector. on the -61 Useful Features - Sharp XG-P560W-N | XG-P560W Operation Manual - Page 64
as the slave. Note • When "Lens Type" is changed, "GEOMETRIC ADJUSTMENT", "H&V KEYSTONE" and "IMAGE RESIZING" will be reset. -62 Note • When controlling multiple projectors with the one remote control, settings via web browser are required. Refer to the "SETUP MANUAL" contained on the supplied CD - Sharp XG-P560W-N | XG-P560W Operation Manual - Page 65
on the "Option 2" menu, and then press ENTER. • The confirmation screen will be displayed. 2 Select "OK", and then press ENTER. • The network settings of the projector will change as shown below. IP Address Subnet Mask DHCP Client Gateway User Name Password Data Port Master 192.168.150.2 255.255 - Sharp XG-P560W-N | XG-P560W Operation Manual - Page 66
Selecting the Transmission Speed (RS-232C) Make sure that both the projector and computer are set for the same baud rate. Selectable items Specifications and Command Settings. • Refer to the computer's operation manual for instructions for setting the computer's baud rate. w Setting the Monitor - Sharp XG-P560W-N | XG-P560W Operation Manual - Page 67
Sync" menu -Resolution • "Options 1" menu -System Lock • "Options 2" menu -Lens Type • "Language" menu • Image stored using "Image Capture" • Lamp Timer (Life) Selecting the On-screen Display Language The projector can switch the on-screen display language among 16 languages. Overview of All Menu - Sharp XG-P560W-N | XG-P560W Operation Manual - Page 68
. Make sure to test on a small, inconspicuous area on the projector before use. Cleaning the lens ■ Use a commercially available blower or lens cleaning paper (for glasses and camera lenses) for cleaning the lens. Do not use any liquid type cleaning agents, as they may wear off the coating film - Sharp XG-P560W-N | XG-P560W Operation Manual - Page 69
is used in a dusty or smoky location. 1 Press STANDBY on the projec- tor or on the remote control to put the projector into standby mode. • Disconnect the power cord and unplug the power cord from the AC socket after the cooling fan stops. STANDBY button 2 Remove the - Sharp XG-P560W-N | XG-P560W Operation Manual - Page 70
Dust Filters Info • If the filters become too dirty to clean effec- tively, purchase new ones (9NK3243101400) from your nearest Sharp Authorized Projector Dealer or Service Center. After removing the filter cover (see step 2 of "Cleaning the Dust Filters"), remove the dust filters, then replace with - Sharp XG-P560W-N | XG-P560W Operation Manual - Page 71
Indicators ■ The warning lights on the projector indicate problems inside the projector. ■ If a problem occurs, either the temperature warning indicator or the lamp indicator will illuminate red, and the projector will enter the standby mode. After the projector has entered the standby mode, follow - Sharp XG-P560W-N | XG-P560W Operation Manual - Page 72
then connect it again. • Carefully replace the lamp. (See • Remaining lamp life page 72.) becomes 5% or less. • Take the projector to your nearest Sharp Authorized Projector Dealer or Service Center for repair. (See • Burnt-out lamp page 81.) • Lamp circuit failure • Please exercise care when - Sharp XG-P560W-N | XG-P560W Operation Manual - Page 73
to fully cool before removing the lamp unit. ■ Carefully change the lamp by following the instructions described in this section. *If you wish, you may have the lamp replaced at your nearest Sharp Authorized Projector Dealer or Service Center. * If the new lamp does not illuminate after replacement - Sharp XG-P560W-N | XG-P560W Operation Manual - Page 74
for the lamp unit cover and lamp unit. 1 Press STANDBY on the projec- tor or on the remote control to put the projector into standby lamp until it has fully cooled down (about 1 hour). 2 Remove the lamp unit cover. • Loosen the user service screw (1) that secures the lamp unit cover. Remove the lamp - Sharp XG-P560W-N | XG-P560W Operation Manual - Page 75
unit cover to the position where the indicator "|" of the lamp cover unit and the "\" of the projector will meet to close the cover. Then tighten the user service screw to secure the lamp unit cover. Info • If the lamp unit and lamp unit cover are not correctly installed, the power will not turn - Sharp XG-P560W-N | XG-P560W Operation Manual - Page 76
timer only when replacing the lamp. If you reset the lamp timer and continue to use the same lamp, this may cause the lamp to become damaged or explode. 1 Connect the power cord. • Plug the power cord into the AC socket of the projector. 2 Reset the lamp timer. For Lamp 1 • When you reset the timer - Sharp XG-P560W-N | XG-P560W Operation Manual - Page 77
is a list of modes that conform to VESA. However, this projector supports other signals that are not VESA standards. PC/ MAC/ WS ) Vertical Frequency (Hz) VESA Standard DVI Support HDMI Support 1280 × 720 45.0 60 Display 1280 × 768 47.8 60 1280 × 800 49.7 60 WXGA 1280 × 800 62.8 75 1360 × - Sharp XG-P560W-N | XG-P560W Operation Manual - Page 78
off the LCD display on the notebook computer and output the display data in "CRT only" mode. Details on how to change display modes can be found in your notebook computer's operation manual. • When this projector receives 640 × 350 VESA format VGA signals, "640 × 400" appears on the screen. • When - Sharp XG-P560W-N | XG-P560W Operation Manual - Page 79
factory preset.) When resetting the lens shift to the center position, press H&V LENS SHIFT and then press UNDO. • The lens shift reset screen will be displayed. Select "Yes" to reset. 1 Press STANDBY on the projector or on the remote control to put the projector into standby mode. • Disconnect the - Sharp XG-P560W-N | XG-P560W Operation Manual - Page 80
to the notch, and turn the lens in the direction of the arrow. • Make sure that the lens is locked with the lens removal lever when you hear a click sound. Info If you try to attach the lens to the projector without removing this cap, the optional lens attachment part can be damaged. 6 Slide and - Sharp XG-P560W-N | XG-P560W Operation Manual - Page 81
Troubleshooting Problem No picture and no sound or projector does not start. Check • Projector power cord is not plugged into the wall outlet. • Power to the external connected devices is off. • The selected input mode is wrong. • Cables are incorrectly connected to the projector. • Remote control - Sharp XG-P560W-N | XG-P560W Operation Manual - Page 82
Troubleshooting Problem An unusual sound is occasionally heard from the cabinet. Check • If faster. 66, 69, 70 The lamp does not light • The lamp indicator is illuminating in red. 69 up even after the Replace the lamp. projector turns on. The lamp suddenly turns off during projection. The - Sharp XG-P560W-N | XG-P560W Operation Manual - Page 83
If you encounter any problems during setup or operation of this projector, first refer to the "Troubleshooting" section on pages 79 and 80. If this operation manual does not answer your question, please contact the SHARP Service departments listed below. U.S.A. Sharp Electronics Corporation 1-888 - Sharp XG-P560W-N | XG-P560W Operation Manual - Page 84
Speakers Projection lamp Rated voltage Rated frequency Input current Power consumption (Standby) Operation temperature Cabinet Dimensions (main body only) [W × H × D] Weight (approx.) XG-P560W (Standard zoom lens attached) / XG-P560W-N (No lens attached) 0.65" DLP® Chip ×3 WXGA (1280 × 800 - Sharp XG-P560W-N | XG-P560W Operation Manual - Page 85
Lamp 71 Lamp indicators 1, 2 69 Lamp Mode 62 Lamp Timer (Life 65 Lamp unit cover 72 LAN terminal 27 LAN/RS232C 64 Language 65 L-CLICK button 18 Lens cap 13 Lens 36 S-VIDEO terminals 26 Save Setting 53 Select Setting 53 Service Mode 65 Set Inputs 63 SHUTTER buttons 41 Signal Info 54 - Sharp XG-P560W-N | XG-P560W Operation Manual - Page 86
SHARP CORPORATION
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
-
79
-
80
-
81
-
82
-
83
-
84
-
85
-
86
 |
 |
Introduction
Quick Start
Setup
Connections
Basic Operation
Useful Features
Appendix
DATA PROJECTOR
MODEL
XG-P560W
(Standard zoom lens attached)
XG-P560W-N
(No lens attached)
OPERATION MANUAL