Sharp XG-PH70XN XG-PH70X Operation Manual

Sharp XG-PH70XN Manual

Get Sharp XG-PH70XN PDF manuals and user guides View all Sharp XG-PH70XN manuals
Add to My Manuals
Save this manual to your list of manuals

Sharp XG-PH70XN manual content summary:

  • Sharp XG-PH70XN | XG-PH70X Operation Manual - Page 1
    Introduction Quick Start Setup Connections Basic Operation Useful Features Appendix OPERATION MANUAL MODEL XG-PH70X (Standard zoom lens attached) XG-PH70X-N (No lens attached) MULTIMEDIA PROJECTOR
  • Sharp XG-PH70XN | XG-PH70X Operation Manual - Page 2
    , French, Swedish, Spanish, Italian, Dutch, Portuguese, Chinese, Korean and Japanese. Carefully read through the operation instructions before operating the projector. Die mitgelieferte CD-ROM enthält Bedienungsanleitungen in Englisch, Deutsch, Französisch, Schwedisch, Spanisch, Italienisch, Niederl
  • Sharp XG-PH70XN | XG-PH70X Operation Manual - Page 3
    operation manual carefully. Introduction ENGLISH There are two important reasons for prompt warranty registration of your new SHARP Projector, using the REGISTRATION CARD packed with the projector. 1. WARRANTY This is to assure that you immediately receive the full benefit of the parts, service
  • Sharp XG-PH70XN | XG-PH70X Operation Manual - Page 4
    of America, the Electronic Industries Alliance: www.eiae.org. Caution Concerning Lamp Replacement See "Replacing the Lamp" on page 96. This SHARP projector uses a DLP® chip. This very sophisticated panel contains 786,432 pixels (micromirrors). As with any high technology electronic equipment such
  • Sharp XG-PH70XN | XG-PH70X Operation Manual - Page 5
    Introduction How to Read This Operation Manual • In this operation manual, the illustrations and on-screen displays using the projector. Note ........Indicates additional information for setting up and operating the projector. For Future Reference Maintenance Page 93 Troubleshooting Pages 102
  • Sharp XG-PH70XN | XG-PH70X Operation Manual - Page 6
    Introduction How to Read This Operation Manual 3 Contents 4 How to Access the PDF Operation Manuals ..... 7 IMPORTANT SAFEGUARDS 8 Accessories Connecting with an S-video Cable or a Composite Video Cable 34 Controlling the Projector by a Computer ... 35 Connecting to a Monitor That Has an RGB
  • Sharp XG-PH70XN | XG-PH70X Operation Manual - Page 7
    Buttons on the Projector ... 85 Bypassing Unused Input Selections 86 Selecting the Fan Mode 86 Direct Power On Function 87 Selecting the Transmission Speed (RS-232C) ....... 87 Monitor Output Settings 88 LAN/RS232C Setting 88 DHCP Client Setting 89 TCP/IP Setting 89 Service Mode 90 Returning
  • Sharp XG-PH70XN | XG-PH70X Operation Manual - Page 8
    96 Replacing the Lamp 96 Removing and Installing the Lamp Unit 97 Resetting the Lamp Timer 99 Computer Compatibility Chart 100 Troubleshooting 102 For SHARP Assistance 104 Specifications 105 Glossary 106 Index 107 The optional lenses are introduced on page 12. Please purchase the lens for
  • Sharp XG-PH70XN | XG-PH70X Operation Manual - Page 9
    " folder. 2) Double click the language (name of the folder) that you want to view. 3) Double click the "PH70_" pdf file to access the projector manuals. When you want to view the setup manual 1) Double click the "SETUP" folder. 2) Double click the language (name of the folder) that you want to view
  • Sharp XG-PH70XN | XG-PH70X Operation Manual - Page 10
    the following basic rules for its installation, use and servicing. 1. Read Instructions All the safety and operating instructions should be read before the product is operated. 2. Retain Instructions The safety and operating instructions should be retained for future reference. 3. Heed Warnings All
  • Sharp XG-PH70XN | XG-PH70X Operation Manual - Page 11
    these environments will not reduce the overall operation life of the unit. Internal cleaning should only be performed by a Sharp Authorized Projector Dealer or Service Center. Do not set up the projector in places exposed to direct sunlight or bright light. ■ Position the screen so that it is not in
  • Sharp XG-PH70XN | XG-PH70X Operation Manual - Page 12
    . If you are not to use the projector for a long time, make certain you manuals of the projector and the equipment to be connected for instructions on how to make the connections. Using the projector function ■ If the projector starts to over- heat due to setup problems or blockage of the
  • Sharp XG-PH70XN | XG-PH70X Operation Manual - Page 13
    lens (Only supplied with XG-PH70X) 9NK3797200400 Projector manual and technical reference CD- manual (this manual) 9NK5010057700 AN-C3CP2 Note • Some of the optional accessories may not be available depending on the region. Please check with your nearest Sharp Authorized Projector Dealer or Service
  • Sharp XG-PH70XN | XG-PH70X Operation Manual - Page 14
    is attached to XG-PH70X. The optional lenses from Sharp are also available for specialized application. Please see your nearest Sharp Authorized Projector Dealer for details on all the lenses. (Refer to the lens operation manual when using a lens.) Also, be sure to have service personnel install the
  • Sharp XG-PH70XN | XG-PH70X Operation Manual - Page 15
    Introduction Numbers in refer to the main pages in this operation manual where the topic is explained. Projector Top View Power indicator 14 ON button 37 For turning the power on. STANDBY button 37 For putting the projector into standby mode. ZOOM button 40 For adjusting the projected image
  • Sharp XG-PH70XN | XG-PH70X Operation Manual - Page 16
    Part Names and Functions About the Indicators on the Projector Power indicator Red on ... Normal (Standby) Green on ... Normal (Power on) Red blinks ... The intake vent cover is open. (See page 93.) Lamp indicators 1, 2 Green
  • Sharp XG-PH70XN | XG-PH70X Operation Manual - Page 17
    to the main pages in this operation manual where the topic is explained. Projector (Side View) Terminals Refer to "INPUT projector has a Kensington Security Standard connector for use with a Kensington MicroSaver Security System. Refer to the information that came with the system for instructions
  • Sharp XG-PH70XN | XG-PH70X Operation Manual - Page 18
    and Functions Numbers in refer to the main pages in this operation manual where the topic is explained. Remote Control FOCUS buttons 40 For bringing the projected image into focus. STANDBY button 37 For putting the projector into standby mode. ZOOM buttons 40 For adjusting the projected image size
  • Sharp XG-PH70XN | XG-PH70X Operation Manual - Page 19
    do not drop it or expose it to moisture or high temperature. • The remote control may malfunction under a fluorescent lamp. In this case, move the projector away from the fluorescent lamp. Inserting the Batteries 1 Press the tab and lift open the battery cover in the direction of the arrow. 2 Insert
  • Sharp XG-PH70XN | XG-PH70X Operation Manual - Page 20
    connect the remote control to the projector. Now you can control the projector with the remote control. Side view Remote control To WIRED REMOTE terminal To WIRED R/C JACK ø3.5 mm minijack cable (commercially available or available as Sharp service part QCNWGA038WJPZ) Note • The wireless remote
  • Sharp XG-PH70XN | XG-PH70X Operation Manual - Page 21
    this function does not work with the following operation systems that do not support USB. • Versions earlier than Windows® 95. • Versions earlier than Windows® USB connection. • While the remote control is connected to the projector with a signal cable, you cannot use the wireless computer mouse function.
  • Sharp XG-PH70XN | XG-PH70X Operation Manual - Page 22
    each step. Setup and Projection In this section, connection of the projector and the computer is explained using one example. 5 8 4 5 8 3 3 46 7 4 6 6 6 46 7 1. Place the projector facing a screen Page 22 2. Connect the projector to the computer and plug the power cord into the AC
  • Sharp XG-PH70XN | XG-PH70X Operation Manual - Page 23
    and "INPUT 5". • When using the remote control, press 8. Turn the power off //// to switch the input mode. Page 45 Press press on the projector or on the remote control. While the confirmation message is displayed, or again. " On-screen Display • You can unplug the power cord even if the
  • Sharp XG-PH70XN | XG-PH70X Operation Manual - Page 24
    in a sunny or bright room. Standard Setup (Front Projection) ■ Place the projector at the required distance from the screen according to the desired picture size. (For details, refer to "SETUP MANUAL" contained on the supplied CD-ROM.) Indication of the Projection Image Size and Projection
  • Sharp XG-PH70XN | XG-PH70X Operation Manual - Page 25
    . Ceiling-mount Setup ■ It is recommended that you use the optional Sharp ceiling-mount bracket for this installation. Before mounting the projector, contact your nearest Sharp Authorized Projector Dealer or Service Center to obtain the recommended ceiling-mount bracket (sold separately). • AN
  • Sharp XG-PH70XN | XG-PH70X Operation Manual - Page 26
    an audio cable. (Shared audio input terminal for INPUT 2 and 3.) (See pages 28 and 29.) RS-232C terminal Connecting the computer to control the projector. (See page 35.) AUDIO OUTPUT terminal Connecting an audio cable. (Shared audio output terminal for INPUT 1 - 5.) (See page 36.) LAN terminal (10
  • Sharp XG-PH70XN | XG-PH70X Operation Manual - Page 27
    manual of the connecting equipment. • You may need other cables or connectors not listed below. Equipment Computer Terminal on connected equipment RGB cable (supplied) Cable Terminal on the projector cable (commercially available or available as Sharp service part QCNWGA038WJPZ) INPUT 3 AUDIO (
  • Sharp XG-PH70XN | XG-PH70X Operation Manual - Page 28
    mm stereo minijack to RCA audio cable (commercially available) Audio output terminal RCA audio cable (commercially available) Terminal on the projector INPUT 4 INPUT 5 AUDIO (for INPUT 1) AUDIO (for INPUT 2, 3) AUDIO (for INPUT 4, 5) Monitor Amplifier RGB input terminal RGB cable (supplied or
  • Sharp XG-PH70XN | XG-PH70X Operation Manual - Page 29
    when using a SHARP notebook computer). Refer to the specific instructions in your computer's operation manual to enable your audio cable (commercially available or available as Sharp service part QCNWGA038WJPZ) Note • With this connection, the projector is not compatible to the sync on
  • Sharp XG-PH70XN | XG-PH70X Operation Manual - Page 30
    -pin D-sub cable (commercially available) ø3.5 mm stereo or mono audio cable (commercially available or available as Sharp service part QCNWGA038WJPZ) To AUDIO input (2, 3) terminal Note • When connecting the projector to a compatible computer other than a PC (VGA/SVGA/XGA/SXGA/UXGA) or Macintosh
  • Sharp XG-PH70XN | XG-PH70X Operation Manual - Page 31
    Digital cable (commercially available) ø3.5 mm stereo or mono audio cable (commercially available or available as Sharp service part QCNWGA038WJPZ) To AUDIO input (2, 3) terminal Note • When connecting the projector to a computer in this way, select "D. PC RGB" for "Signal Type" in the "Picture
  • Sharp XG-PH70XN | XG-PH70X Operation Manual - Page 32
    use the computer-RGB/component terminals (INPUT 1 or 2) on the projector for video connection. Connecting to Video Equipment That Has an HDMI Output transmission may not work property. (The HDMI specification does not support all connections to video equipment that has HDMI digital output terminal
  • Sharp XG-PH70XN | XG-PH70X Operation Manual - Page 33
    Connecting to Video Equipment That Has a DVI Output Terminal with a DVI Digital Cable Use a DVI Digital cable when connecting video equipment with the DVI output terminal such as DVD players to the INPUT 3 terminal. Video Equipment Side view To audio output terminals To DVI output terminal To
  • Sharp XG-PH70XN | XG-PH70X Operation Manual - Page 34
    ) To INPUT 2 terminals To BNC to RCA adaptors Note • When connecting the projector to the video equipment in this way, select "RGB" for "Signal Type" of the DTV decoder connected to this projector. Please refer to the operation manual of the DTV decoder for details. • The HD/C sync terminal
  • Sharp XG-PH70XN | XG-PH70X Operation Manual - Page 35
    Fine Sync" menu, if necessary. (See page 69.) • When you connect video equipment with a 21-pin RGB output (Euro-scart) to the projector, use a com- mercially available cable that fits in the projector terminal you want to connect. • The projector does not support RGBC signals via the Euro-scart. -33
  • Sharp XG-PH70XN | XG-PH70X Operation Manual - Page 36
    . • An RCA audio cable (commercially available) is required for audio input. • When you connect video equipment with a 21-pin RGB output (Euro-scart) to the projector, use a com- mercially available cable that fits in the
  • Sharp XG-PH70XN | XG-PH70X Operation Manual - Page 37
    to the RS-232C serial terminal on the computer, or when the LAN terminal on the projector to the LAN terminal on the computer, the computer can be used to control the projector. Refer to the "SETUP MANUAL" contained on the supplied CD-ROM for details. When connecting to a computer using an RS
  • Sharp XG-PH70XN | XG-PH70X Operation Manual - Page 38
    case of connecting an amplifier or other audio equipment, first turn off the power of the amplifier and then turn off the power of the projector. • By using external audio components, the volume can be amplified for better sound. • For details on Variable Audio Output (VAO) and Fixed Audio Output
  • Sharp XG-PH70XN | XG-PH70X Operation Manual - Page 39
    on. Blinking green: The lamp is warming up. Red: The lamp is shut down abnormally or the lamp should be replaced. • When switching on the projector, a slight flickering of the image may be experienced within the first minute after the lamp has been illuminated. This is normal operation as the lamp
  • Sharp XG-PH70XN | XG-PH70X Operation Manual - Page 40
    Image Projection Shifting the Lens In addition to the zoom function and adjustment of projection angle using the adjustment feet, you can adjust the position of the projection using the lens shift function. This is a useful function in cases such as when the screen cannot be moved. When moving
  • Sharp XG-PH70XN | XG-PH70X Operation Manual - Page 41
    with the lens shift function, use the adjustment feet to adjust the projected angle. • The height of the projector can be adjusted using the adjustment feet when the screen is located higher than the projector, the screen is inclined or when the installation site is slightly inclined. • Install the
  • Sharp XG-PH70XN | XG-PH70X Operation Manual - Page 42
    control to adjust the focus. ▼On-screen Display ZOOM button FOCUS button ZOOM buttons FOCUS buttons Adjusting the Projected Image Size Press on the projector or on the remote control to adjust the projected image size. ▼On-screen Display -40 Note • After you have pressed the FOCUS buttons or
  • Sharp XG-PH70XN | XG-PH70X Operation Manual - Page 43
    of the horizontal and vertical axes Selecting the Type of the Correction Select the type of the keystone correction. Press on the projector or on the remote control. • "GEOMETRIC ADJUSTMENT" will be displayed. • Each time or toggles as follows: is pressed, the display GEOMETRIC ADJUSTMENT
  • Sharp XG-PH70XN | XG-PH70X Operation Manual - Page 44
    or focus of the projected image. • Match screen's four sides to green test pattern. • Pressing ', ", \ or | on the projector or on the remote control allows you to shift the lens. • Pressing on the projector or on the remote control allows you to adjust the projected image size. • Pressing on the
  • Sharp XG-PH70XN | XG-PH70X Operation Manual - Page 45
    H & V KEYSTONE 1 Press on the projector or on the remote control repeatedly until "H & V KEYSTONE" is displayed. • When the correction has already been made with "GEOMETRIC ADJUSTMENT", the confirmation message for resetting
  • Sharp XG-PH70XN | XG-PH70X Operation Manual - Page 46
    Image Projection 5 Press ', ", \ or | to correct the image distortion. IMAGE RESIZING (Adjustment with 6 Press or sition. to set the po- -44
  • Sharp XG-PH70XN | XG-PH70X Operation Manual - Page 47
    switches in order of : INPUT 1 INPUT 2 INPUT 3 • When pressing on the projector, the input mode switches between "INPUT 4" and "INPUT 5". Note • When no signal is received, "NO SIGNAL" will be displayed. When non-supported signal is received, "NOT REG." is displayed. • When "Auto Search" of
  • Sharp XG-PH70XN | XG-PH70X Operation Manual - Page 48
    Image Projection Adjusting the Volume Press\ /| on the projector or on the remote control to adjust the volume. Note • Pressing Pressing or \ will lower the volume. or | will raise the volume. "On-screen Display
  • Sharp XG-PH70XN | XG-PH70X Operation Manual - Page 49
    2 Press on the remote control to cancel the operation. • The magnification then returns to ×1. Note In the following cases, the image will return to the normal size (×1). • When switching the input mode. • When has been pressed. • When the input signal is changed. • When the input signal resolution
  • Sharp XG-PH70XN | XG-PH70X Operation Manual - Page 50
    Image Projection This function allows you to modify or customize the resize mode to enhance the input image. Depending on the input signal, you can choose a desired image. Resize Mode Mouse/adjustment button ('/"/\/|) Press on the remote control. • Pressing changes the display as shown. • To
  • Sharp XG-PH70XN | XG-PH70X Operation Manual - Page 51
    VIDEO Input signal DTV/video Image type For 4:3 screen NORMAL FULL 4:3 aspect ratio 480I, 480P, 576I, 576P, NTSC, PAL, SECAM Letter box Squeeze 540P 16:9 aspect ratio Select "Stretch" 4:3 aspect ratio in 16:9 Select "Full" 720P, 1035I, 1080I 16:9 aspect ratio Select "Stretch"
  • Sharp XG-PH70XN | XG-PH70X Operation Manual - Page 52
    . • Auto Power Off function will be temporarily disabled during the break timer. When no input signal is detected for more than 15 minutes, the projector will automatically enter the standby mode if the break timer has elapsed. • The break timer will be displayed on the startup image. To change the
  • Sharp XG-PH70XN | XG-PH70X Operation Manual - Page 53
    The following shows the items that can be set in the projector. "Picture" menu INPUT 1 / INPUT 2 / INPUT 3 Mode Page 60 Contrast -30 +30 Bright -30 Color -30 Tint -30 Red -30 Green -30 Blue -30 Sharp -30 Page 60 CLR Temp Page 61 Bright Boost 0 Page 61 +30 +30 *1 +30 *1 *1 +30
  • Sharp XG-PH70XN | XG-PH70X Operation Manual - Page 54
    Picture Mode Page 60 Contrast -30 +30 Bright -30 +30 Color -30 +30 Tint -30 +30 Red -30 +30 Green -30 +30 Blue -30 +30 Sharp -30 +30 Page 60 CLR Temp Page 61 Bright Boost 0 +10 Page 61 Progressive Page 62 C.M.S. Adjustment Page 64 DNR Page 62 Reset Page 60
  • Sharp XG-PH70XN | XG-PH70X Operation Manual - Page 55
    "C.M.S." menu "Fine Sync" menu Main Menu C.M.S. Page 64 Sub Menu C.M.S. Adjustment Page 64 Target Page 64 Lightness -30 +30 Page 65 Chroma -30 +30 Page 65 Hue -30 +30 Page 66 Reset (This Color) Page 66 Reset (All Colors) Page 66 View Settings Page 67 Standard Custom 1 Custom 2 Custom 3
  • Sharp XG-PH70XN | XG-PH70X Operation Manual - Page 56
    Menu Items "Audio" menu Main Menu Audio Page 72 Sub Menu Balance -30 +30 Treble -30 +30 Bass -30 +30 Reset -30 +30 Page 72 Audio Out FAO Page 72 VAO Speaker [ON/OFF] Page 73 "Options (1)" menu INPUT 1 / INPUT 2 / INPUT 3 Main Menu Sub Menu Options (1) *8 Pict in Pict Page 74
  • Sharp XG-PH70XN | XG-PH70X Operation Manual - Page 57
    Mode Page 86 Direct Power On [ON/OFF] Page 87 RS-232C Page 87 Monitor Out Page 88 LAN/RS232C Page 88 Network Page 89 Service Mode Page 90 All Reset Page 91 Old Password New Password Reconfirm Lamp 1 Lamp 2 Both Lamps Lamp 1 Only Lamp 2 Only Equal Use Front Ceiling + Front
  • Sharp XG-PH70XN | XG-PH70X Operation Manual - Page 58
    MENU button UNDO button Menu Selections (Adjustments) Example: Adjusting "Bright" • This operation can also be performed by using the buttons on the projector. 1 Press . • The "Picture" menu screen for the selected input mode is displayed. Example: "Picture" screen menu for INPUT 1 (RGB) mode
  • Sharp XG-PH70XN | XG-PH70X Operation Manual - Page 59
    3 Press ' or " to select the item you want to adjust. • Pressing displays the items on the lower part of the "Picture" menu. To adjust the projected image while viewing it Press . • The selected single adjustment item (e.g. "Bright") appears instead of the menu. • When pressing ' or ", the
  • Sharp XG-PH70XN | XG-PH70X Operation Manual - Page 60
    button ENTER button Menu Selections (Settings) Example: Setting "OSD Display" • This operation can also be performed by using the buttons on the projector. 1 Press . • The "Picture" menu screen for the selected input mode is displayed. UNDO button Example: "Picture" screen menu for INPUT 1 (RGB
  • Sharp XG-PH70XN | XG-PH70X Operation Manual - Page 61
    3 Press ' or " to select the item you want to set. Note • Press to return to the previous screen. • In some menu, select the icon using . 4 Press | to shift the cursor to the sub menu. 5 Press ' or " to select the set- ting of the item displayed in the sub menu. 6 Press . • The selected item
  • Sharp XG-PH70XN | XG-PH70X Operation Manual - Page 62
    preset value is the same as the one of "Standard". Using the dedicated software allows you to adjust the gamma curve. Visit "http://sharp-world.com/projector/" for details. Note • You can also press on the remote control to select the picture mode. (See page 47.) Description of Adjustment
  • Sharp XG-PH70XN | XG-PH70X Operation Manual - Page 63
    Adjusting the Color Temperature Menu operation Page 56 Example: "Picture" screen menu for INPUT 1 (RGB) mode Emphasizing the Contrast This function emphasizes the bright portions of images to obtain a higher contrast image. Menu operation Page 56 Example: "Picture" screen menu for INPUT 1 (RGB)
  • Sharp XG-PH70XN | XG-PH70X Operation Manual - Page 64
    SECAM) enhancement to progressive mode images. * The film source is a digital video recording with the original encoded as is at 24 frames/second. The projector can convert this film source to progressive video at 60 frames/second with NTSC and PAL60Hz or at 50 frames/second with PAL50Hz and SECAM
  • Sharp XG-PH70XN | XG-PH70X Operation Manual - Page 65
    Signal Type Setting This function allows you to select the input signal type RGB or component for INPUT 1, INPUT 2 or INPUT 3. Menu operation Page 58 Example: "Picture" screen menu for INPUT 1 (RGB) mode Useful Features Description of Signal Type Settings INPUT 1/INPUT 2 Selectable items
  • Sharp XG-PH70XN | XG-PH70X Operation Manual - Page 66
    Color Management System ("C. M. S." menu) This function allows you to individually adjust the display characteristics of six colors (R: Red, Y: Yellow, G: Green, C: Cyan, B: Blue, M: Magenta). Selecting the Color Reproduction Mode This function allows you to select the color reproduction mode for
  • Sharp XG-PH70XN | XG-PH70X Operation Manual - Page 67
    Setting the Brightness of the Target Color This function allows you to set the brightness of the selected target color. Menu operation Page 56 Example: "C.M.S." screen menu Setting the Chromatic Value of the Target Color This function allows you to set the chromatic value of the selected target
  • Sharp XG-PH70XN | XG-PH70X Operation Manual - Page 68
    Color Management System ("C. M. S." menu) Setting the Hue of the Target Color This function allows you to set the hue of the selected target color. Menu operation Page 56 Example: "C.M.S." screen menu Resetting User-defined Color Settings This function allows you to reset the specific target color
  • Sharp XG-PH70XN | XG-PH70X Operation Manual - Page 69
    Overview of All Color Settings This function allows you to confirm the settings of all the colors. Menu operation Page 56 Example: "C.M.S." screen menu -67 Useful Features
  • Sharp XG-PH70XN | XG-PH70X Operation Manual - Page 70
    flickering in portions of the screen. Menu operation Page 56 Example: "Fine Sync" screen menu for INPUT 1 (RGB) mode Saving Adjustment Settings This projector allows you to store up to seven adjustment settings for use with various computers. Menu operation Page 58 Example: "Fine Sync" screen menu
  • Sharp XG-PH70XN | XG-PH70X Operation Manual - Page 71
    a resolution and frequency setting will not be displayed. • When selecting a stored adjustment setting with "Select Setting", you can set the projector in the stored adjustments. Note • If your computer displays patterns which repeat every other line (horizontal stripes), flickering may occur which
  • Sharp XG-PH70XN | XG-PH70X Operation Manual - Page 72
    Sync adjustment may take some time to complete, depending on the image of the computer connected to the projector. • When the optimum image cannot be achieved with Auto Sync adjustment, use manual adjust- ments. (See page 68.) • When is pressed while "Auto Sync" is "OFF" or "High Speed", Auto
  • Sharp XG-PH70XN | XG-PH70X Operation Manual - Page 73
    Auto Sync Display Function Used to set the display during Auto Sync. Menu operation Page 56 Example: "Fine Sync" screen menu for INPUT 1 (RGB) mode Description of Auto Sync Display Selectable items Description - The image set as a background image is projected. See page 77. The computer image
  • Sharp XG-PH70XN | XG-PH70X Operation Manual - Page 74
    "FAO" be selected on "Audio Out". Because the audio signal from the audio equipment does not vary in strength with the volume level of the projector, you can enjoy better sound. • When "FAO" be selected on "Audio Out", video and audio may not synchronize. - When connecting audio equipment that has
  • Sharp XG-PH70XN | XG-PH70X Operation Manual - Page 75
    Speaker Setting This function allows you to turn the audio output of the internal speaker on or off when the projector is connected to an external amplifier. Menu operation Page 56 Example: "Audio" screen menu Description of Speaker Settings Selectable items Description The audio signal is
  • Sharp XG-PH70XN | XG-PH70X Operation Manual - Page 76
    can only be displayed in composite video or S-video signal of NTSC/PAL/SECAM. • The audio of the inset picture will come out of the projector's speakers. • While the "Pict in Pict" function is working, the "FREEZE" function only works for the inset picture. • The "Pict in Pict" function does not
  • Sharp XG-PH70XN | XG-PH70X Operation Manual - Page 77
    , FOCUS, ZOOM, "All buttons on Pro- jector are locked." and warning displays) Note • While "Keylock Level" is "Level A" or "Level B", pressing displays "All buttons on Projector are locked." despite the "OSD Display" setting. Useful Features -75
  • Sharp XG-PH70XN | XG-PH70X Operation Manual - Page 78
    . In that case, switch the video signal. Menu operation Page 58 Example: "Options (1)" screen menu for INPUT 4 (video) mode Capturing Projected Images This projector allows you to capture projected images (RGB signals) and set them as a startup image, or background image when no signals are being
  • Sharp XG-PH70XN | XG-PH70X Operation Manual - Page 79
    Selecting the Background Image Menu operation Page 58 Example: "Options (1)" screen menu for INPUT 1 (RGB) mode Selecting the Startup Image Menu operation Page 58 Example: "Options (1)" screen menu for INPUT 1 (RGB) mode Description of Background Images Selectable items Description Logo
  • Sharp XG-PH70XN | XG-PH70X Operation Manual - Page 80
    received. OFF "Auto Search" does not function. Note • While the "Auto Search" function is detecting the input signal, pressing a button on the projector or the remote control stops the "Auto Search" function. After the "Auto Search" function finishes completely, press the desired button. -78
  • Sharp XG-PH70XN | XG-PH70X Operation Manual - Page 81
    in a safe place where only authorized users have access. Info • If you lose or forget your keycode, contact your near- est Sharp Authorized Projector Dealer or Service Center (see page 104). Even if the product warranty is valid, the keycode reset will incur a charge. Menu operation Page 58 Example
  • Sharp XG-PH70XN | XG-PH70X Operation Manual - Page 82
    (1)" Menu Note • If you input a wrong keycode, the cursor returns to the first point of the "Old Code". • The preset keycode is 4 " buttons on the projector. If this keycode is set, the keycode input screen does not appear when turning the power on. 3 Press the 4 buttons on the remote control or
  • Sharp XG-PH70XN | XG-PH70X Operation Manual - Page 83
    an individual button, even if they share the same button name. If you set the keycode with the buttons on the projector, use only those buttons on the projector. If you set the keycode with the buttons on the remote control, use only those buttons on the remote control. Useful Features -81
  • Sharp XG-PH70XN | XG-PH70X Operation Manual - Page 84
    Helpful Functions Set during Installation ("Options (2)" menu) Setting a Password • There is no factory preset for the password, so the "Options (2)" menu is enabled. • If you do not want others to operate the "Options (2)" menu, set a password. Menu operation Page 58 Example: "Options (2)" screen
  • Sharp XG-PH70XN | XG-PH70X Operation Manual - Page 85
    Options (2)" screen menu Setting the Lamp Mode This function allows you to select the usage of the two lamps installed in the projector. Menu operation Page 58 Example: "Options (2)" screen menu Useful Features Description of Lamp Timer (Life) Lamp usage condition Operated exclusively while "Eco
  • Sharp XG-PH70XN | XG-PH70X Operation Manual - Page 86
    with the one remote control, settings via web browser are required. Refer to the "SETUP MANUAL" contained on the supplied CD-ROM for details. • Only when controlling two projectors with the one remote control, using "Pair Stack" allows you to skip settings via web browser. (See page 85.) • When
  • Sharp XG-PH70XN | XG-PH70X Operation Manual - Page 87
    required for the stack projection. You can skip the settings via web browser by using "Pair Stack", only when you use the two projectors for the stack projection. Menu operation Page 56 Note • Before setting "Pair Stack", select "Master" or "Slave" on "Stack Setting". Example: "Options (2)" screen
  • Sharp XG-PH70XN | XG-PH70X Operation Manual - Page 88
    you to skip the input mode that you rarely use.You can skip the input modes when pressing INPUT 1, 2, 3 button or INPUT 4, 5 button on the projector. Menu operation Page 58 Selecting the Fan Mode This function changes the fan rotation speed. Menu operation Page 58 Example: "Options (2)" screen menu
  • Sharp XG-PH70XN | XG-PH70X Operation Manual - Page 89
    the AC outlet or the breaker switch is turned on. The projector is turned on manually (see page 37), and does not turn on automatically when "SETUP MANUAL" contained on the supplied CD-ROM for RS-232C Specifications and Command Settings. • Refer to the computer's operation manual for instructions for
  • Sharp XG-PH70XN | XG-PH70X Operation Manual - Page 90
    "Disable" when it is not connected. This reduces power consumption when the projector is in the standby mode. Menu operation Page 58 LAN/RS232C Setting When " when it is not connected. This reduces power consumption when the projector is in the standby mode. Menu operation Page 58 Example: "Options
  • Sharp XG-PH70XN | XG-PH70X Operation Manual - Page 91
    DHCP Client Setting Connect the LAN cable before turning the projector on. If not, the DHCP Client function does not work. Menu operation Page 58 TCP/IP Setting Set the TCP/IP manually. Menu operation Page 58 Example: "Options (2)" screen menu Example: "Options (2)" screen menu Useful Features
  • Sharp XG-PH70XN | XG-PH70X Operation Manual - Page 92
    . 000. 000 * When not in use, set to: "000. 000. 000. 000". Service Mode Only the service centers use the menu. Do not use the menu. Example: "Options (2)" screen menu Note • don't have to change the projector IP address. • For details about each setting, consult your network administrator. -90
  • Sharp XG-PH70XN | XG-PH70X Operation Manual - Page 93
    Returning to the Default Settings This function allows you to initialize the settings you have made in the projector. Menu operation Page 56 Example: "Options (2)" screen menu Note About the network settings • "IP Address", "Subnet Mask", "Gateway" and other network setting items are initialized.
  • Sharp XG-PH70XN | XG-PH70X Operation Manual - Page 94
    Using the Other Menus ("Language" and "Status" menus) Selecting the On-screen Display Language The projector can switch the on-screen display language among 11 languages: English, German, Spanish, Dutch, French, Italian, Swedish, Portuguese, Chinese, Korean or Japanese. Menu operation Page
  • Sharp XG-PH70XN | XG-PH70X Operation Manual - Page 95
    the intake vent cover should be cleaned every 100 hours of use. Clean the air vents and the intake vent cover more often when the projector is used in a dusty or smoky location. • Ensure the intake vent cover is securely installed. The power will not turn on unless it is correctly
  • Sharp XG-PH70XN | XG-PH70X Operation Manual - Page 96
    Indicators ■ The warning lights on the projector indicate problems inside the projector. ■ If a problem occurs, either the temperature warning indicator or the lamp indicator will illuminate red, and the projector will enter the standby mode. After the projector has entered the standby mode, follow
  • Sharp XG-PH70XN | XG-PH70X Operation Manual - Page 97
    it again. • Carefully replace the lamp. (See • Remaining lamp life page 97.) becomes 5% or less. • Take the projector to your nearest Sharp Authorized Projector Dealer or Service Center for repair. (See • Burnt-out lamp page 104.) • Lamp circuit failure • Please exercise care when replacing
  • Sharp XG-PH70XN | XG-PH70X Operation Manual - Page 98
    before removing the lamp unit. ■ Carefully change the lamp by following the instructions described in this section. *If you wish, you may have the lamp replaced at your nearest Sharp Authorized Projector Dealer or Service Center. * If the new lamp does not illuminate after replacement, take your
  • Sharp XG-PH70XN | XG-PH70X Operation Manual - Page 99
    . Ensure the glass surface of the lamp unit or the inside of the projector are not touched. • To avoid injury to yourself and damage to the (about 1 hour). 3 Remove the lamp unit cover. • Loosen the user service screw (1) that secures the lamp unit cover. Remove the lamp unit cover (2). Optional
  • Sharp XG-PH70XN | XG-PH70X Operation Manual - Page 100
    unit cover. • Align the lamp unit cover and slide it to close. Then tighten the user service screw to secure the lamp unit cover. Securing screws AN-PH7LP1 For Lamp 1 Compartment for AN- power cord is connected to the projector. AN-PH7LP2 For Lamp 2 Compartment for AN-PH7LP2 User service screw -98
  • Sharp XG-PH70XN | XG-PH70X Operation Manual - Page 101
    that the lamp timer is reset. For Lamp 2 • When you reset the timer for ANPH7LP2, while simultaneously holding down and , press on the projector. • "LAMP 2 100%" is displayed, indicating that the lamp timer is reset. To AC socket Power cord ON button H&V LENS SHIFT button ENTER button
  • Sharp XG-PH70XN | XG-PH70X Operation Manual - Page 102
    Intelligent Compression and Ex- pansion System) resizing technology The following is a list of modes that conform to VESA. However, this projector supports other signals that are not VESA standards. PC/ MAC/ WS PC Resolution Horizontal Frequency (kHz) Vertical Frequency (Hz) VESA Standard
  • Sharp XG-PH70XN | XG-PH70X Operation Manual - Page 103
    the LCD display on the notebook computer. For more details, refer to the operation manual of the notebook computer. • When this projector receives 640 × 350 VESA format VGA signals, "640 × 400" appears on the (Hz) 60 60 60 50 50 60 50 60 60 50 DVI Support (Compatible with HDCP) Appendix -101
  • Sharp XG-PH70XN | XG-PH70X Operation Manual - Page 104
    Troubleshooting Problem No picture and no sound or projector does not start. Check • Projector power cord is not plugged into the wall outlet. • Power to the external connected devices is off. • The selected input mode is wrong. • Cables incorrectly connected to side panel of the projector. •
  • Sharp XG-PH70XN | XG-PH70X Operation Manual - Page 105
    Problem The projector cannot be turned on or put into the standby mode using the ON or STANDBY button on the projector. All buttons on the projector and the remote control are unavailable. Picture is green on INPUT 1or 2 (COMPONENT). Picture is pink (no green) on INPUT 1, 2 or 3 (RGB). Picture is
  • Sharp XG-PH70XN | XG-PH70X Operation Manual - Page 106
    you encounter any problems during setup or operation of this projector, first refer to the "Troubleshooting" section on pages 102 and 103. If this operation manual does not answer your question, please contact the SHARP Service departments listed below. U.S.A. Sharp Electronics Corporation 1-888
  • Sharp XG-PH70XN | XG-PH70X Operation Manual - Page 107
    × 471 (D) mm) (including adjustment foot and projecting parts) Weight (approx.) XG-PH70X: 32.9 lbs. (14.9 kg) XG-PH70X-N: 30.3 lbs. (13.7 kg) Replacement parts Remote control, Power Projector manual and technical reference CD-ROM, Operation manual As a part of policy of continuous improvement, SHARP
  • Sharp XG-PH70XN | XG-PH70X Operation Manual - Page 108
    Temp (Color temperature) (Page 61) Function that can be used to adjust the color temperature to suit the type of image input to the projector. Decrease the color temperature to create warmer, reddish images for natural flesh tones, or increase to create cooler, bluish images for a brighter picture
  • Sharp XG-PH70XN | XG-PH70X Operation Manual - Page 109
    Remote mouse receiver 19 Resize 48 RESIZE button 48 RGB cable 27 RS-232C 87 RS-232C terminal 35 Save Setting 68 Select Setting 69 Service Mode 90 Set Inputs 86 Signal Info 70 Signal Type 63 Smart Stretch 49 Speaker 73 Special Modes 69 sRGB 64 Stack Setting 84 STANDBY
  • Sharp XG-PH70XN | XG-PH70X Operation Manual - Page 110
    SHARP CORPORATION
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
MODEL
XG-PH70X
(Standard zoom lens attached)
XG-PH70X-N
(No lens attached)
MULTIMEDIA PROJECTOR
OPERATION MANUAL
Introduction
Quick Start
Setup
Connections
Basic Operation
Useful Features
Appendix