Sharp XG-SV100W Operation Manual

Sharp XG-SV100W Manual

Get Sharp XG-SV100W PDF manuals and user guides View all Sharp XG-SV100W manuals
Add to My Manuals
Save this manual to your list of manuals

Sharp XG-SV100W manual content summary:

  • Sharp XG-SV100W | Operation Manual - Page 1
    DATA PROJECTOR MODEL XG-SV100W XG-SV200X OPERATION MANUAL Introduction Easy Start Setup Connections Basic Operation Useful Features Appendix
  • Sharp XG-SV100W | Operation Manual - Page 2
    IMPORTANT • For your assistance in reporting the loss or theft of your Projector, please record the Model and Serial Number located on the bottom of the projector and retain this information. • Before recycling the packaging, please ensure that you have checked the contents of the carton thoroughly
  • Sharp XG-SV100W | Operation Manual - Page 3
    shock may occur. To fit an appropriate plug to the mains lead, follow the instructions below: WARNING: THIS APPARATUS MUST BE EARTHED. IMPORTANT: The wires in this mains for the European Union Community Market SHARP ELECTRONICS (Europe) GmbH Sonninstraße 3, D-20097 Hamburg E.U. ONLY iii
  • Sharp XG-SV100W | Operation Manual - Page 4
    German, French, Spanish, Italian, Dutch, Swedish, Portuguese, Chinese, Korean and Arabic. Carefully read through the operation instructions before operating the projector. Die mitgelieferte CD-ROM enthält Bedienungsanleitungen in Englisch, Deutsch, Französisch, Spanisch, Italienisch, Niederländisch
  • Sharp XG-SV100W | Operation Manual - Page 5
    manual carefully. Introduction ENGLISH There are two important reasons for prompt warranty registration of your new SHARP Projector, using the REGISTRATION CARD packed with the projector. 1. WARRANTY This is to assure that you immediately receive the full benefit of the parts, service
  • Sharp XG-SV100W | Operation Manual - Page 6
    manual, instructions described on pages 72 to 74. * If you wish, you may have the lamp replaced at your nearest Sharp Authorized Projector Dealer or Service Center. * If the new lamp does not light after replacement, take your projector to the nearest Sharp Authorized Projector Dealer or Service
  • Sharp XG-SV100W | Operation Manual - Page 7
    • In this operation manual, the illustration and the Color Tint Sharp Red Blue CLR Temp BrilliantColorTM C.M.S.1 C.M.S.2 DNR Eco+Quiet Reset SEL./ADJ. projector. Note ....... Indicates additional information for setting up and operating the projector. For Future Reference Maintenance Troubleshooting
  • Sharp XG-SV100W | Operation Manual - Page 8
    to Access the PDF Operation Manuals 10 Accessories 11 Part Names and Functions 12 Side View 12 Top View 12 Front View 12 Rear View (Terminals 13 Inserting the Batteries 15 Usable Range 15 Easy Start Easy Start 16 Setup and Projection 16 Setup Setting Up the Projector 18 Video Setup 18
  • Sharp XG-SV100W | Operation Manual - Page 9
    and Installing the Lamp Unit 73 Resetting the Lamp Timer 74 Compatibility Chart 75 Attaching the Ceiling-mount Rotating Module (AN-SV100T)...........77 Attaching the Terminal Cover to the Module 78 Attaching the Ceiling Mount to the Ceiling 79 Troubleshooting 81 For SHARP Assistance 84 Speci
  • Sharp XG-SV100W | Operation Manual - Page 10
    the following basic rules for its installation, use and servicing. 1. Read Instructions All the safety and operating instructions should be read before the product is operated. 2. Retain Instructions The safety and operating instructions should be retained for future reference. 3. Heed Warnings All
  • Sharp XG-SV100W | Operation Manual - Page 11
    normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions, as an improper adjustment of 20. Safety Check Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine that
  • Sharp XG-SV100W | Operation Manual - Page 12
    hazard of glass particles if lamp ruptures. In case of lamp rupture, contact your nearest Sharp Authorized Projector Dealer or Service Center for replacement. See "Regarding the Lamp" on page 72. Caution concerning the setup of the projector ■ For minimal servicing and to maintain high image
  • Sharp XG-SV100W | Operation Manual - Page 13
    read the operation manuals of the projector and the equipment to be connected for instructions on how to make the connections. Using the projector in other countries If this state continues, the lamp will turn off, the cooling fan will run and then the projector will enter Standby mode. Refer to
  • Sharp XG-SV100W | Operation Manual - Page 14
    the Internet (http://www.adobe.com). Accessing the PDF Manuals For Windows®:  Insert the CD-ROM in Projector Using the PJLinkTM Protocol 10 Setting up the Projector Network Environment 11 Controlling the Projector via LAN 17 Resetting the Lamp Timer of the Projector via LAN 22 Troubleshooting
  • Sharp XG-SV100W | Operation Manual - Page 15
    country. • Operation manuals (this manual and CD-ROM ) Note • Codes in "< >" are Replacement parts codes. Optional accessories ■ Lamp unit ■ Ceiling- depending on the region. Please check with your nearest Sharp Authorized Projector Dealer or Service Center. 11
  • Sharp XG-SV100W | Operation Manual - Page 16
    manual where the topic is explained. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 19 15 16 17 18 19 20 Side View 1 STANDBY/ON button 27 For turning the power on and putting the projector cooling fan and extending the lamp life. Top View 12 Power indicator 70 13 Lamp indicator 70 14 Temperature warning
  • Sharp XG-SV100W | Operation Manual - Page 17
    (Terminals) 1 LAN terminal 26 Terminal for controlling the projector using a computer via network. 2 USB terminal 42 RS-232C terminal 25 Terminal for controlling the projector using a computer. 11 VIDEO input terminal 23 Using the Kensington Lock • This projector has a Kensington Security Standard
  • Sharp XG-SV100W | Operation Manual - Page 18
    manual where the topic is explained. 1 2 3 4 16 5 6 17 7 18 8 19 9 20 10 21 22 11 23 12 24 13 25 14 26 15 27 1 ON button 27 For turning the power on. 2 STANDBY button 27 For putting the projector the lamp life. 27 3D MODE button 67 For displaying the 3D mode menu screen. 14
  • Sharp XG-SV100W | Operation Manual - Page 19
    first and then remove them using a cloth. • The batteries included with this projector may run down in a short period, depending on how they are kept. Be under a fluorescent lamp. In this case, move the projector away from the fluorescent lamp. Remote control signal transmitters Remote control 15
  • Sharp XG-SV100W | Operation Manual - Page 20
    computer). For details, see the page described below for each step. Setup and Projection In this section, connection of the projector and the computer is explained using one example. 3, 8 STANDBY/ON button 6, 7 ENTER button 6 R/P buttons, 7 INPUT buttons 6 O/Q buttons 6 KEYSTONE button 8 STANDBY
  • Sharp XG-SV100W | Operation Manual - Page 21
    • When the position of the lower left is set, the correction is made and the display disappears. BP. 31 7. Select the Input mode On the projector Press INPUT R/P to display the INPUT list. Use INPUT R/P to select the Input mode, and use O/Q to select the audio input terminal. INPUT list INPUT
  • Sharp XG-SV100W | Operation Manual - Page 22
    Front Projection) ■ Place the projector at the required distance from Indication of the Projection Image Size and Projection Distance XG-SV200X (Example: 4:3 Signal Input (Normal Mode)) -'814"29.'(161"5m-.91)9m'2"- Distance 30.2 m) XG-SV100W (Example: 16:10 Signal Input (Normal Mode)) Picture
  • Sharp XG-SV100W | Operation Manual - Page 23
    Setup Screen Size and Projection Distance [For XG-SV200X] 4:3 Signal Input (Normal Mode) 8") -58 cm (-22 7/8") 8 cm (3 17/64") ±22 cm (±8 23/32") When using the projector with screen sizes not listed in the above charts, calculate the values according to the formulas. L1: Minimum projection
  • Sharp XG-SV100W | Operation Manual - Page 24
    Setting Up the Projector (Continued) [For XG-SV100W] 16:10 Signal Input (Normal Mode) Picture ( cm (±15 59/64") ±35 cm (±13 41/64") ±23 cm (±9 3/32") When using the projector with screen sizes not listed in the above charts, calculate the values according to the formulas. L1: Minimum projection
  • Sharp XG-SV100W | Operation Manual - Page 25
    Rear"] aCeiling-Mount Setup It is recommended that you use the optional Sharp ceiling-mount adaptor and unit for this installation. Before mounting the projector, contact your nearest Sharp Authorized Projector Dealer or Service Center to obtain the recommended ceiling-mount adaptor and unit (sold
  • Sharp XG-SV100W | Operation Manual - Page 26
    property. (The HDMI specification does not support all connections to equipment that has digital a list of computer signals compatible with the projector. Use with computer signals other than those listed SHARP notebook computer). Refer to the specific instructions in your computer's operation manual
  • Sharp XG-SV100W | Operation Manual - Page 27
    connecting the external equipment. (See page 56.) • When you connect video equipment with a 21-pin RGB output (Euro-scart) to the projector, use a commercially available cable that fits in the projector terminal you want to connect. • The projector does not support RGBC signals via the Euro-scart. 23
  • Sharp XG-SV100W | Operation Manual - Page 28
    available or available terminal as Sharp service part QCNWGA038WJPZ) Terminal on the projector AUDIO 1 Monitor Amplifier RCA the monitor. This projector is able to process the following signals when connected to HDMI equipment: • Video signal: For details, see "Digital Support" in the list
  • Sharp XG-SV100W | Operation Manual - Page 29
    an RS-232C serial control cable (cross type, commercially available), the computer can be used to control the projector and check the status of the projector. Refer to the "SETUP MANUAL" contained on the supplied CD-ROM for "RS-232C Specifications and Commands". When connecting to a computer using
  • Sharp XG-SV100W | Operation Manual - Page 30
    Controlling the Projector by a Computer (Continued) When connecting to the LAN terminal using a LAN cable LINK LED (green) the Power Cord Plug the supplied power cord into the AC socket on the rear of the projector. Then plug into AC outlet. 26 AC socket Power cord (supplied) To AC outlet
  • Sharp XG-SV100W | Operation Manual - Page 31
    the lamp indicator illuminates, the projector is ready to start operation. Note • About the Lamp Indicator The lamp indicator illuminates to indicate the status of the lamp. Green: The lamp is on. Blinking in green: The lamp is warming up. Red: The lamp is shut down abnormally or the lamp should
  • Sharp XG-SV100W | Operation Manual - Page 32
    in the left and right direction Adjustable range Adjustable range Adjustable range • The adjustable range is shown below. Horizontal range: ±25% (XG-SV200X)/±23% (XG-SV100W) Vertical range: ±50% The adjustable range has limitations even within the range shown above. • The image can be adjusted as
  • Sharp XG-SV100W | Operation Manual - Page 33
    END LENS SHIFT TESTPATTERN LENS CENTER 2 Press P, R, O or Q on the projector or the remote control to adjust the image position. Note • When RETURN is pressed, the lens shift reset screen is displayed. Lens shift can be reset to factory default with this screen. ENTER button Adjustment buttons
  • Sharp XG-SV100W | Operation Manual - Page 34
    +/- on the remote control to adjust the focus. ROn-screen display FOCUS TESTPATTERN Info • It is recommended that the focus be adjusted after the projector has warmed up for at least 30 minutes. Adjusting the Projected Image Size Press ZOOM +/- on the remote control to adjust the projected image
  • Sharp XG-SV100W | Operation Manual - Page 35
    of the horizontal and vertical axes Selecting the Type of the Correction Select the type of the keystone correction. Press KEYSTONE on the projector or on the remote control. • "GEOMETRIC ADJUSTMENT" will be displayed. • Each time KEYSTONE is pressed, the display toggles as follows: GEOMETRIC
  • Sharp XG-SV100W | Operation Manual - Page 36
    display GEOMETRIC ADJUSTMENT H&V KEYSTONE ADJUST NEXT RESET 3 Press ENTER to set the position. 4 Repeat the same procedure with the positions for the upper right, lower right and lower left of the image. • At this time, pressing RETURN on the projector or on the remote control returns to
  • Sharp XG-SV100W | Operation Manual - Page 37
    H&V KEYSTONE 1 Press KEYSTONE on the projector or on the remote control repeatedly until "H&V KEYSTONE" is displayed. ROn-screen display H&V KEYSTONE END EXIT TEST PTRN H:0 V:0 ADJUST RESET 2 Press P or R to parallelize the left and right sides of the projected image. Vertical Keystone
  • Sharp XG-SV100W | Operation Manual - Page 38
    input mode. ■ When you select the input mode with INPUT R/P on the projector: • When R/P is pressed, the Input list appears. While the Input desired input mode and then press ENTER. • If ENTER is not pressed, the projector switches to the selected input mode in a few seconds. Note • When no signal
  • Sharp XG-SV100W | Operation Manual - Page 39
    to external equipment, the volume level of the external equipment changes in accordance with the volume level of the projector. Set the projector's volume to the lowest level when turning the projector on/off or when changing the input signal. • When you do not want to output the sound from the
  • Sharp XG-SV100W | Operation Manual - Page 40
    input image. Depending on the input signal, you can choose a desired image. Press RESIZE. • See page 54 for setting on menu screen. [For XG-SV200X] COMPUTER RESIZE button 4:3 aspect ratio Other aspect ratios Main resolution SVGA (800 × 600) XGA (1024 × 768) SXGA (1152 × 864) UXGA (1600 × 1200
  • Sharp XG-SV100W | Operation Manual - Page 41
    [For XG-SV200X] VIDEO/DTV Input signal Video/DTV Image type NORMAL For 4:3 screen AREA ZOOM V-STRETCH For 16:9 screen BORDER 16:9 480I, 480P, 576I, 576P, NTSC, PAL,
  • Sharp XG-SV100W | Operation Manual - Page 42
    Image Projection (Continued) [For XG-SV100W] COMPUTER 4:3 aspect ratio Other aspect ratios Main resolution SVGA (800 × 600) XGA (1024 × 768) SXGA (1152 × 864) SXGA+ (1400 × 1050) SXGA (1280 × 1024) 1280 × 720
  • Sharp XG-SV100W | Operation Manual - Page 43
    [For XG-SV100W] VIDEO/DTV Input signal Video/DTV Image type NORMAL Output screen image AREA ZOOM V-STRETCH 16:9 480I, 480P, 576I, 576P, NTSC, PAL, SECAM 4:3 aspect ratio
  • Sharp XG-SV100W | Operation Manual - Page 44
    timer display function Press BREAK TIMER. Note • The Break Timer is not available while the projector is operating the following functions. - Auto Sync - Freeze - AV Mute 2 Press SPOT consumption will decrease, and the lamp life will extend. Note • Refer to "Eco+Quiet" on page 50 for details. 40
  • Sharp XG-SV100W | Operation Manual - Page 45
    Auto Sync (Auto Sync Adjustment) Displaying an Enlarged Portion of an Image Auto Sync function works when detecting input signal after the projector turns on. Press AUTO SYNC to manually adjust with Auto Sync function. Note • When the optimum image cannot be achieved with Auto Sync adjustment, use
  • Sharp XG-SV100W | Operation Manual - Page 46
    projector and the computer with a USB cable, you can use the remote control as the computer mouse. Connecting with a USB cable Computer To USB terminal To USB terminal USB cable (commercially available or available as Sharp service Windows® OS and Mac OS® that support USB. • You cannot use this
  • Sharp XG-SV100W | Operation Manual - Page 47
    following shows the items that can be set in the projector. "Picture" menu Main menu Picture Page 48 Picture Mode Page 48 Sub menu Standard Presentation Movie Game sRGB Contrast -30 +30 Bright -30 +30 Color -30 +30 Tint -30 +30 Sharp -30 +30 Red -30 +30 Blue -30 +30 Page 48
  • Sharp XG-SV100W | Operation Manual - Page 48
    Menu Items (Continued) "Signal adjustment (SIG)" menu Main menu SIG Page 52 Clock -150 +150 Phase -30 +30 H-Pos -150 +150 V-Pos -60 +60 Reset Page 52 Sub menu Resolution Page 52 Auto Sync [On/Off] Page 52 Signal Type Page 52 Video System Page 53 Video Setup Page 53
  • Sharp XG-SV100W | Operation Manual - Page 49
    58 Memory Menu Page 59 Rotate Indicator [On/Off] Page 59 All Reset Page 60 Lamp Timer (Life) Page 60 Sub menu Input Monitor Output Standard Eco 9600bps 62 TCP/IP Page 62 Reset Network Setting Page 62 Restart Network Page 62 IP Address Page 63 MAC Address Page 63 Projector Page 63 Sub menu IP
  • Sharp XG-SV100W | Operation Manual - Page 50
    • This operation can also be performed by using the buttons on the projector. 1 Press MENU. • The "Picture" menu screen for the selected PRJ Net. Picture Mode Contrast Bright Color Tint Sharp Red Blue CLR Temp BrilliantColorTM C.M.S.1 C.M.S.2 DNR Eco+Quiet Reset SEL./ADJ. RETURN Standard 0 0 0 0
  • Sharp XG-SV100W | Operation Manual - Page 51
    Net. Picture Mode Contrast Bright Color Tint Sharp Red Blue CLR Temp BrilliantColorTM C.M.S.1 C.M.S.2 DNR Eco+Quiet Reset SEL./ADJ. RETURN Standard 0 15 0 0 0 0 0 0 1 Off Off Level 2 Off ENTER END Note • The MENU button is not available while the projector is operating: - Auto Sync/Break Timer
  • Sharp XG-SV100W | Operation Manual - Page 52
    ("Picture" Menu) Picture Audio SIG SCR PRJ Net.  Picture Mode Contrast Bright Color  Tint Sharp Red Blue  CLR Temp  BrilliantColorTM  C.M.S.1 C.M.S.2  DNR  Eco+Quiet Reset Standard 0 0 0 0 0 0 0 0 1 Off Off Level 2 Off SEL./ADJ. RETURN ENTER END 1 Selecting the Picture
  • Sharp XG-SV100W | Operation Manual - Page 53
    there is data for the stored corrected color, the C.M.S. color adjustment screen is displayed. (Go to step 3.) C.M.S.1 Select Color Hue Saturation Value Effect C.M.S.1 Reset Return 0 0 0 0 On SEL./ADJ. RETURN ENTER END 2 Use the picker and select the color of the projected image to correct. The
  • Sharp XG-SV100W | Operation Manual - Page 54
    screen. C.M.S.1 Select Color Hue Saturation Value Effect C.M.S.1 Reset Return 0 0 0 0 On SEL./ADJ. RETURN Saturation Value Effect*1 C.M.S.1*2 (or C.M.S.2) Reset Return Sets the hue of the main colors 80% Off 100% Fan Sound Low Normal Lamp life Approx. 2,500 hours Approx. 1,500 hours Note •
  • Sharp XG-SV100W | Operation Manual - Page 55
    END 1 Speaker Setting This function allows you to set the audio output of the internal speaker to "On" or "Off" such as when the projector is connected to an external amplifier. Selectable items Description On The audio signal is output from the internal speaker. Off The audio signal is
  • Sharp XG-SV100W | Operation Manual - Page 56
    on-screen image by moving it up or down. Note • To reset all adjustment items, select "Reset" and press ENTER. • The adjustable range of "H-Pos" (H-Position) • Auto Sync adjustment is also performed by pressing AUTO SYNC on the projector or on the remote control. • The Auto Sync adjustment may take
  • Sharp XG-SV100W | Operation Manual - Page 57
    n Page 46 7 Selecting the Dynamic Range An optimum picture may not be displayed if an HDMI capable device's output signal type and the projector's input signal type do not match. If this should occur, switch "Dynamic Range". Selectable items Description Auto Standard Enhanced When the black
  • Sharp XG-SV100W | Operation Manual - Page 58
    Screen Adjustment ("SCR" Menu) Picture Audio SIG SCR PRJ Net.  Resize  Wall Color  Overscan  OSD Display  Closed Caption  Background  PRJ Mode  Language Normal Off On On Off Logo Front English Menu operation n Page 46 3 Setting the Overscan This function allows you to set the
  • Sharp XG-SV100W | Operation Manual - Page 59
    at the broadcast source. This does not necessarily indicate a problem with the projector. Menu operation n Page 46 6Selecting a Startup and Background Image Selectable items Logo Blue None Description SHARP default image Blue screen Black screen 7Reversing/Inverting Projected Images This
  • Sharp XG-SV100W | Operation Manual - Page 60
     Memory Menu T Rotate Indicator Z All reset H Lamp Timer (Life) [ SCR PRJ Net. "On", 5 minutes before the projector enters the standby mode, the MANUAL" contained on the supplied CD-ROM for RS-232C Specifications and Command Settings. • Refer to the computer's operation manual for instructions
  • Sharp XG-SV100W | Operation Manual - Page 61
    have access. Info • If you lose or forget your keycode, contact your nearest Sharp Authorized Projector Dealer or Service Center (see page 84). Even if the product warranty is valid, the keycode reset will incur a charge. aSetting/Changing the keycode 1 Select "System Lock", then press ENTER
  • Sharp XG-SV100W | Operation Manual - Page 62
    during warming up. Keylock Function Use this function to lock the operation buttons on the projector. Locking the Operation Buttons 1 Hold down ENTER on the projector for about 5 seconds while the projector is being turned on. • The Keylock function screen is displayed. 8 DLP® LinkTM See "Using 3D
  • Sharp XG-SV100W | Operation Manual - Page 63
    ), or activate the stored settings. You can also store the rotation angle when attaching the ceiling-mount rotating module (AN-SV100T) to the projector. The Memory Menu screen can also be displayed by pressing MEMORY MENU on the remote control. aLoad Memory To activate the desired settings, select
  • Sharp XG-SV100W | Operation Manual - Page 64
    This function allows you to initialize the settings you have made in the projector. Note The following items or menu cannot be initialized. • "SIG" the Lamp Life Status You can confirm the cumulative lamp usage time and the remaining lamp life (percentage). Lamp usage condition Remaining lamp
  • Sharp XG-SV100W | Operation Manual - Page 65
    Setting Up the Projector Network Environment ("Net." Menu) Picture Audio SIG SCR PRJ Net.  Password  DHCP Client  TCP/IP  Reset Network Setting  Restart Network Disable Off Menu operation n Page 46 a Changing the Password 1 Select "Password", then press Q. • The screen for entering
  • Sharp XG-SV100W | Operation Manual - Page 66
    figuration parameters for TCP/IP network automatically. Sets the TCP/IP manually. Select "On" for "DHCP Client". "Obtaining IP Address..." IP address of "192.168.150.XXX", you don't have to change the projector IP address. • For details about each setting, consult your network administrator. 4
  • Sharp XG-SV100W | Operation Manual - Page 67
    Description IP Address The IP address of the projector is displayed. MAC Address The MAC address of the projector is displayed. Projector The projector name is displayed. Note • For information on how to change the projector name, see "SETUP MANUAL" contained in the supplied CD-ROM. Menu
  • Sharp XG-SV100W | Operation Manual - Page 68
    people may experience discomfort. The following precautions are recommended to minimize the potential for experiencing visual problems or any adverse symptoms. ■ Take regular breaks, at least 5 to 15 minutes after DLP® Link™ Invert", see the section on its operation in this operation manual.) 64
  • Sharp XG-SV100W | Operation Manual - Page 69
    WARNING ■ The following people should limit stereoscopic 3D viewing: - Children under 6 years of age (to protect the eye growth process) - People with a history of photosensitivity - People with heart disease - People in poor health - People who are sleep deprived - People who are physically tired -
  • Sharp XG-SV100W | Operation Manual - Page 70
    the field sequential format - For details on the supported signals, see the Compatibility Chart in this operation manual. 2) 3D LCD shutter glasses that support the DLP® Link™* system - Contact your nearest Sharp Authorized Projector Dealer for purchasing details. * DLP® Link™ is a trademark of
  • Sharp XG-SV100W | Operation Manual - Page 71
    . • Set the 3D-video playback equipment so that it outputs one of the signals listed in the Compatibility Chart in this operation manual. 3 Switch the Input mode of the projector to enable input of 3D video signals. 9 Press 3D MODE. • The 3D MODE menu will disappear. Note • If the images are not
  • Sharp XG-SV100W | Operation Manual - Page 72
    ™ ) Works The 3D projection function of this projector is compatible with the DLP® Link™ system. light signal is transmitted from the lens of the projector, reflected by the screen, and received by receiving sensitivity). For details, see the operation manual of your 3D LCD shutter glasses. ■
  • Sharp XG-SV100W | Operation Manual - Page 73
    not use volatile agents such as insecticides on the projector. Do not attach rubber or plastic items to the projector for long periods. The effects of some of the in the plastic may cause damage to the quality or finish of the projector. ■ Wipe off dirt gently with a soft flannel cloth. Using a
  • Sharp XG-SV100W | Operation Manual - Page 74
    and temperature warning indicator) on the projector indicate problems inside the projector. ■ If a problem occurs, either the temperature warning indicator or the lamp indicator will illuminate red, and the projector will enter Standby mode. After the projector has entered Standby mode, follow the
  • Sharp XG-SV100W | Operation Manual - Page 75
    the AC outlet, and then connect it again. • Remaining lamp life • Carefully replace the lamp. becomes 5% or less. (See page 72.) • Burnt-out lamp • Lamp circuit failure • Take the projector to your nearest Sharp Authorized Projector Dealer or Service Center (see page 84) for repair. • Please
  • Sharp XG-SV100W | Operation Manual - Page 76
    unit to fully cool before removing the lamp unit. ■ Carefully change the lamp by following the instructions described in this section. * If you wish, you may have the lamp replaced at your nearest Sharp Authorized Projector Dealer or Service Center. * If the new lamp does not light after replacement
  • Sharp XG-SV100W | Operation Manual - Page 77
    control to put the projector into Standby mode. 2 Disconnect the power cord. • Unplug the power cord from the AC socket. • Leave the lamp until it has fully cooled down (about 1 hour). 3 Remove the lamp unit cover. • Loosen the user service screw (1) that secures the lamp unit cover. Remove the
  • Sharp XG-SV100W | Operation Manual - Page 78
    cover. Then tighten the user service screw (3) to secure the lamp unit cover. Info • If the lamp unit and lamp unit cover are not correctly installed, the power will not turn on, even if the power cord is connected to the projector. Resetting the Lamp Timer Reset the lamp timer after replacing the
  • Sharp XG-SV100W | Operation Manual - Page 79
    60 70 75 60 75 60 75 60 60 60 60 67 75 75 75 Analog Support ✔ Digital Support ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ Display XG-SV100W XG-SV200X Upscale Upscale TRUE TRUE Intelligent Compression Intelligent Compression Upscale Intelligent Compression Upscale TRUE Intelligent Compression
  • Sharp XG-SV100W | Operation Manual - Page 80
    Frequency (kHz) 37.9 77.1 48.4 98.6 49.7 101.6 45.0 92.6 Vertical Frequency (Hz) 60 120 60 120 60 120 *1 60 120 Analog Support ✔ ✔ ✔ ✔ Digital Support Note • Your computer graphics card must be able to display 3D stereoscopic signals. Please check with your computer/graphic card specifications
  • Sharp XG-SV100W | Operation Manual - Page 81
    on a flat surface. Remove the connector cover. 3 Place the ceiling-mount rotating module on the bottom of the projector so that it is aligned with the module installation holes on the projector. (Make sure the three position-setting pins on the module are inserted into the position-setting holes on
  • Sharp XG-SV100W | Operation Manual - Page 82
    Attaching the Terminal Cover to the Module 1 Fix the hooks of the terminal covers ( ) and fit the small protrusions on the covers into the slots on the ceiling-mount rotating module (AN-SV100T) ( ). 2 Fasten the terminal covers at the two points with the supplied screws. Screws 78
  • Sharp XG-SV100W | Operation Manual - Page 83
    firmly and fit the pin into the hole on the pole-fixing bolt. Pin hole Sleeve Caution • Ask your dealer or service shop to install the ceiling mount. Sharp will assume no responsibility whatsoever if inadequate installation causes your projector or attached devices to fall out of place. Appendix 79
  • Sharp XG-SV100W | Operation Manual - Page 84
    on the method of installation.) • Use the washers supplied with the ceiling mount. Caution • Ask your dealer or service shop to install the ceiling mount. Sharp will assume no responsibility whatsoever if inadequate installation causes your projector or attached devices to fall out of place. 80
  • Sharp XG-SV100W | Operation Manual - Page 85
    Troubleshooting Problem Check Page • Projector power cord is not plugged into the wall outlet. 26 • Power to the external connected devices is off. - • The selected Input mode is wrong. 34 • The AV Mute function is working. 35 • Cables are incorrectly connected to the projector manual of
  • Sharp XG-SV100W | Operation Manual - Page 86
    Troubleshooting (Continued) Problem Check Maintenance indicator on • See "Maintenance Indicators". the projector illuminates or blinks in red of the projector. • If direct sunlight or a strong fluorescent lamp is shining on the projector's remote control sensor, place the projector where it will
  • Sharp XG-SV100W | Operation Manual - Page 87
    to the normal 3D viewing mode. See the operation manual of your 3D LCD shutter glasses. • Check the settings of the projector. - - Turn the DLP® Link™ function "On this projector. For details on the supported signals, see "3D Supported Signals" of the Compatibility Chart. • If the projector is
  • Sharp XG-SV100W | Operation Manual - Page 88
    If you encounter any problems during setup or operation of this projector, first refer to the "Troubleshooting" section on pages 81 to 83. If this operation manual does not answer your question, please contact the SHARP Service departments listed below. U.S.A. Sharp Electronics Corporation 1-888-GO
  • Sharp XG-SV100W | Operation Manual - Page 89
    USB (Type B) terminals RS-232C (mini DIN 9 pin) Speaker Projection lamp Rated voltage Rated frequency Input current Power consumption Eco+Quiet AC 100 V Off This SHARP projector uses a DLP® chip. This very sophisticated panel contains 1,024,000 (XG-SV100W) or 786,432 (XG-SV200X)
  • Sharp XG-SV100W | Operation Manual - Page 90
    86 Dimensions Units: inches (mm) 1 1/2 (38) 13 5/16 (338) 6 21/64 (160.5) 3 1/2 (89) 2 59/64 2 25/64 (74) (60.5) 16 (406.5) 7 63/64 (202.5) 2 9/64 (54) M4 M4 1 5/8 (41.25) 15 61/64 (405) M4 M4 3 3/4 (95) 7 31/64 (190) 11 63/64 (304) ø68 M4 M4 M4 M4 2 61/64 (75) 4 11/32 (110)
  • Sharp XG-SV100W | Operation Manual - Page 91
    61 PDF 10 the lamp 72, 73 Reset Network Setting 62 Resize 36, 54 RESIZE button 36 Resolution 52 Restart Network 62 RGB cable 22 ROTATE button 14 Rotate Indicator 59 RS-232C terminal 25 Saturation 50 SCR 54 Screen Size and Projection Distance 19, 20 Select Color 50 Sharp
  • Sharp XG-SV100W | Operation Manual - Page 92
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
Introduction
Easy Start
Setup
Connections
Basic
Operation
Useful
Features
Appendix
OPERATION MANUAL
DATA PROJECTOR
MODEL
XG-SV100W
XG-SV200X