Sharp XG-V10WU XG-V10WU Operation Manual

Sharp XG-V10WU Manual

Get Sharp XG-V10WU PDF manuals and user guides View all Sharp XG-V10WU manuals
Add to My Manuals
Save this manual to your list of manuals

Sharp XG-V10WU manual content summary:

  • Sharp XG-V10WU | XG-V10WU Operation Manual - Page 1
    Important Information Setup & Connections Operation Buttons Basic Operation Useful Features & Network Function Maintenance & Troubleshooting OPERATION MANUAL MODEL XG-V10WU LCD PROJECTOR Appendix Lenses are sold separately.
  • Sharp XG-V10WU | XG-V10WU Operation Manual - Page 2
    13. Model No.: XG-V10WU Serial No.: There are two important reasons for prompt warranty registration of your new SHARP LCD Projector, using the REGISTRATION CARD packed with the projector. 1. WARRANTY This is to assure that you immediately receive the full benefit of the parts, service and labor
  • Sharp XG-V10WU | XG-V10WU Operation Manual - Page 3
    basic rules for its installation, use and servicing. For your own protection and reliable usage of your LCD Projector, please be sure to read these "IMPORTANT SAFEGUARDS" carefully before use. 1. Read Instructions All the safety and operating instructions should be read before the product is
  • Sharp XG-V10WU | XG-V10WU Operation Manual - Page 4
    J" SHARP ELECTRONICS CORPORATION SHARP PLAZA, MAHWAH, NEW JERSEY 07430 TEL : 1-800-BE-SHARP U.S.A. ONLY REMOTE CONTROL Sharp Industrial LCD Products Dealer or Service Center. Notes on Operation • The exhaust vent, the lamp cage cover and adjacent areas may be extremely hot during projector
  • Sharp XG-V10WU | XG-V10WU Operation Manual - Page 5
    cover to hide the connecting cables when the projector is used on a desktop or high mounted. 1 Attach the terminal cover by aligning with the tabs on the projector. 2 Install the terminal cover using the two supplied user service screws attached. Optional lenses • Lenses are sold separately
  • Sharp XG-V10WU | XG-V10WU Operation Manual - Page 6
    High-end LCD Projector with Ultra High Brightness • 200 W UHP Lamps Uses two 200 W UHP lamps for excellent color uniformity and ultra high brightness. • Newly developed prism enables efficient combination of light from two lamps. A light axis separation and synthesis prism developed by Sharp enables
  • Sharp XG-V10WU | XG-V10WU Operation Manual - Page 7
    computer about lamp usage time and any malfunctions. • Multiple & Group Projector Control Up to 250 projectors can be controlled over a network. Projector RS- Screen 10. Application Software • "Sharp Advanced Presentation Software-Professional Edition" (Network and Remote Control) LAN LAN LAN E-6
  • Sharp XG-V10WU | XG-V10WU Operation Manual - Page 8
    PDF Operation Manuals 9 Part LENS Button 29 Image Projection 30 Rear Projection 30 Projection Using a Mirror 30 Ceiling-mount Specific Portion of an Image 33 Adjusting the Picture Aspect Ratio 34 Gamma Correction Function 35 Selecting the Remote Control Mode ......... 36 Operating the Remote
  • Sharp XG-V10WU | XG-V10WU Operation Manual - Page 9
    Lamp 71 Replacing the Air Filter 73 Troubleshooting 74 For SHARP Assistance (U.S.A. only) ..... 74 Appendix Guide to Effective Presentations 75 Connecting Pin Assignments 79 (RS-232C) Specifications and Command Settings 80 Wired Remote Control Terminal Specifications Multiple Projectors with
  • Sharp XG-V10WU | XG-V10WU Operation Manual - Page 10
    Double click on the "xg-v10wu" folder. 6 Double click on the language (name of the folder) that you want to view. 7 Double click on the "v10" pdf file to access the projector manuals. Double click on the "saps" pdf file to access the Sharp Advanced Presentation Software manual. 8 Double click on the
  • Sharp XG-V10WU | XG-V10WU Operation Manual - Page 11
    part names refer to the main pages in this manual where the topic is explained. Projector Front and Top View 31 MUTE button POWER buttons (ON/OFF) 19 31 VOLUME buttons LENS button 34 RESIZE button 35 GAMMA button Remote control sensor 36 Lens (sold separately) 21 Air filter (Intake vent)
  • Sharp XG-V10WU | XG-V10WU Operation Manual - Page 12
    Numbers next to the part names refer to the main pages in this manual where the topic is explained. Projector Side and Rear View Speakers Exhaust vent 3 Remote control sensor 36 LED display (ID No.) 63 14 AC socket RS-232C INPUT port/ 16 RS-232C OUTPUT port 628 OUTPUT port (15-pin
  • Sharp XG-V10WU | XG-V10WU Operation Manual - Page 13
    Information Part Names Remote Control Front View MUTE button 31 POWER buttons (ON/OFF) 19 LENS/BLACK 29 SCREEN button 32 RIGHT-CLICK/ 37 ENTER button 40 INPUT 1, 2, 3 button 31 FREEZE button 32 ENLARGE button 33 TOOLS button 64 MOUSE/ ADJUSTMENT 36 switch 1.2.3 4.5.6 Conference Series Top
  • Sharp XG-V10WU | XG-V10WU Operation Manual - Page 14
    cable QCNW-5680CEZZ Remote mouse receiver RUNTK0673CEZZ Extra air filter PFILD0110CEZZ Terminal cover CCOVA1789CE01 CD-ROM UDSKA0020CEN1 LCD projector operation manual TINS-6974CEZZ LCD projector quick reference TINS-6980CEZZ Sharp Advanced Presentation Software operation manual TINS-6992CEZZ
  • Sharp XG-V10WU | XG-V10WU Operation Manual - Page 15
    manual carefully before making connections. • Refer to page 84 "Computer Compatibility Chart" for a list of computer signals compatible with the projector some Macintosh computers. Contact 2 your nearest Authorized Sharp Industrial LCD Products Dealer or Service Center. • AUDIO INPUT 1 can be used
  • Sharp XG-V10WU | XG-V10WU Operation Manual - Page 16
    system. • A 3.5 mm stereo minijack to stereo RCA audio cable adaptor may be necessary. When connecting the projector to a compatible computer other than a PC (VGA/ SVGA/XGA/SXGA/UXGA) or Macintosh (i.e. Workstation), a separate cable may be needed. Please contact your dealer for more information
  • Sharp XG-V10WU | XG-V10WU Operation Manual - Page 17
    set up. Please refer to the operation manual of the computer for details on setting up your nearest Authorized Sharp Industrial LCD Products Dealer or Service Center. Connecting to (sold separately) to AUDIO INPUT 3 terminal on the projector. 4 Connect the other end to the audio output terminal
  • Sharp XG-V10WU | XG-V10WU Operation Manual - Page 18
    equipment using the BNC video Input 1 Connect each BNC connector of a component or video cable to the corresponding BNC INPUT 4 or 5 terminals on the projector. • BNC-RCA adaptors are needed for use with RCA type cables and sources. 2 Connect the other end of the cable to the corresponding terminals
  • Sharp XG-V10WU | XG-V10WU Operation Manual - Page 19
    and other component video equipment using the 5 BNC Input 1 Connect each BNC connector of a component cable to the corresponding BNC INPUT 2 terminals on the projector. • BNC-RCA adaptors are needed for use with RCA type cables and sources. 2 Connect the other end of the cable to the corresponding
  • Sharp XG-V10WU | XG-V10WU Operation Manual - Page 20
    the main power is not on, the remote control cannot be used to operate the projector. Setup & Connections TEMP LAMP2 LAMP1 POWER 2 1 POWER buttons 1.2.3 4.5.6 TEMP LAMP2 LAMP1 POWER 2 1 Conference Series E-19 Press POWER ON. • The flashing green LAMP REPLACEMENT indicator shows that the
  • Sharp XG-V10WU | XG-V10WU Operation Manual - Page 21
    , the image may become distorted (keystoned), depending on the relative positions of the projector and the screen. CAUTION • Do not hold the lens when lifting or lowering the projector. • When lowering the projector, be careful not to get your fingers caught in the area between the adjustment
  • Sharp XG-V10WU | XG-V10WU Operation Manual - Page 22
    with this projector. Six optional lenses from Sharp are also available for specialized application. Please see your local Sharp Industrial LCD Products Dealer to details on all the lenses. (Refer to the lens operation manual when attaching a lens.) Be sure to have service personnel install optional
  • Sharp XG-V10WU | XG-V10WU Operation Manual - Page 23
    0557x ‫מ‬0.1166) ‫ ן‬3.28 1 y2 (Min.) = (0.0428x ‫מ‬0.1060) ‫ ן‬3.28 z1 (Upper) = 0.300x z (Lower) =‫מ‬0.084x 2 x: Screen size (diag.) (inches) y: Projection distance (L) (feet) z: Lens center to the lower edge of the screen (H) (inches) Video Input (16:9) Diag. 500Љ 400Љ 300Љ 200Љ 150Љ 133Љ 106
  • Sharp XG-V10WU | XG-V10WU Operation Manual - Page 24
    screen size and projection distance y = (0.0191x ‫מ‬0.0561) ‫ ן‬3.28 x: Screen size (diag.) (inches) z (Upper) = 0.300x 1 z2 (Lower) = 0.268x y: Projection distance (L) (feet) z: Lens center to the lower edge of the screen (H) (inches) Video Input (16:9) Diag. 500Љ 400Љ 300Љ 200Љ 150Љ 133Љ 106
  • Sharp XG-V10WU | XG-V10WU Operation Manual - Page 25
    (0.0318x ‫מ‬0.0841) ‫ ן‬3.28 y (Min.) = (0.0276x ‫מ‬0.0841) ‫ ן‬3.28 2 z1 (Upper) = 0.300x z2 (Lower) =‫מ‬0.020x x: Screen size (diag.) (inches) y: Projection distance (L) (feet) z: Lens center to the lower edge of the screen (H) (inches) Video Input (16:9) Diag. 500Љ 400Љ 300Љ 200Љ 150Љ 133Љ 106
  • Sharp XG-V10WU | XG-V10WU Operation Manual - Page 26
    (0.0605x ‫מ‬0.1391) ‫ ן‬3.28 y (Min.) = (0.0379x ‫מ‬0.0804) ‫ ן‬3.28 2 z1 (Upper) = 0.300x z2 (Lower) =‫מ‬0.020x x: Screen size (diag.) (inches) y: Projection distance (L) (feet) z: Lens center to the lower edge of the screen (H) (inches) Video Input (16:9) Diag. 500Љ 400Љ 300Љ 200Љ 150Љ 133Љ 106
  • Sharp XG-V10WU | XG-V10WU Operation Manual - Page 27
    0817x ‫מ‬0.1868) ‫ ן‬3.28 y2 (Min.) = (0.0583x ‫מ‬0.1862) ‫ ן‬3.28 z (Upper) = 0.300x 1 z (Lower) =‫מ‬0.020x 2 x: Screen size (diag.) (inches) y: Projection distance (L) (feet) z: Lens center to the lower edge of the screen (H) (inches) Diag. 500Љ 400Љ 300Љ 200Љ 150Љ 133Љ 106Љ 100Љ 92Љ 84Љ Screen
  • Sharp XG-V10WU | XG-V10WU Operation Manual - Page 28
    33.3 m) 114Ј 6Љ (34.9 m) 81Ј 8Љ (24.9 m) 76Ј 1Љ (23.2 m) 54Ј 6Љ (16.6 m) 57Ј 1Љ (17.4 m) 40Ј 8Љ (12.4 m) 37Ј 9Љ (11.5 m) 26Ј 11Љ (8.2 m) 31Ј 10Љ (9.7 m) 22Ј 8Љ (6.9 m) Lens center to the lower edge of the screen (H) Upper Lower 15Ј 0Љ (457.2 cm) ‫מ‬11.7Љ (‫מ‬29.8 cm) 12Ј 6Љ (381.0 cm
  • Sharp XG-V10WU | XG-V10WU Operation Manual - Page 29
    of screen (White portion) = Standard (0) point -H Lower lens shift position H: ‫מ‬6.0؆ (‫מ‬15.2 cm) Upper lens shift position (High mount setup) Lower lens shift position (Desktop setup) Upper and Lower Lens Shift Position (Ceiling Mount) When the projector is in the inverted position, use the
  • Sharp XG-V10WU | XG-V10WU Operation Manual - Page 30
    LENS Button Projector Remote Control 1, 4a 3 2 4b 4b On-screen Display (Example: 5:4 NORMAL image) 1.2.3 4.5.6 On-screen Display (Example: 16:9 WIDE image) Digital Image Adjustments This function can be used to adjust the focus, zoom, lens LENS until normal screen appears. b. To reset
  • Sharp XG-V10WU | XG-V10WU Operation Manual - Page 31
    screen. • Place a mirror (normal flat type) in front of the lens. • Project the normal image onto the mirror. • The image reflected from Sharp ceiling-mount bracket for this installation. • Before mounting the projector, contact your nearest Authorized Sharp Industrial LCD Products Dealer or Service
  • Sharp XG-V10WU | XG-V10WU Operation Manual - Page 32
    Control VOLUME buttons Press VOLUME to adjust the volume. On-screen Display 1.2.3 4.5.6 Muting the Sound Projector Conference Series Remote Control MUTE button Press MUTE to temporarily turn off the sound. Press MUTE again to turn the sound back on. On-screen Display E-31 1.2.3 4.5.6
  • Sharp XG-V10WU | XG-V10WU Operation Manual - Page 33
    function, slide the MOUSE/ADJUSTMENT MOUSE ADJ. switch to the MOUSE position before pressing BLACK SCREEN. sg Displaying a Still Image Projector Remote Control 1, 2 1.2.3 4.5.6 This function allows you to instantly freeze a moving image. This is useful when you want to display a still image
  • Sharp XG-V10WU | XG-V10WU Operation Manual - Page 34
    Operation Buttons s Magnifying a Specific Portion of an Image Projector Remote Control 2 1 3 1.2.3 4.5.6 3 On-screen Display ‫ן‬4 This function allows you to magnify a specific portion of an image. This is useful when you want to display a detailed portion of the image. (Slide the MOUSE/
  • Sharp XG-V10WU | XG-V10WU Operation Manual - Page 35
    Adjusting the Picture Aspect Ratio Projector COMPUTER Input Signal Remote Control 1 2 1.2.3 4.5.6 2 This function UXGA (1600 ‫ ן‬1200) 1280 ‫ ן‬960 1280 ‫ ן‬1024 - For without 4:3 aspect ratio SXGA (1280 ‫ ן‬1024) 1280 ‫ ן‬1024 - - FULL Output screen image BORDER STRETCH SMART STRETCH
  • Sharp XG-V10WU | XG-V10WU Operation Manual - Page 36
    Operation Buttons Gamma Correction Function Projector Remote Control STANDARD GAMMA 1 GAMMA 2 CUSTOM 1 2 1.2.3 4.5.6 2 s s you to adjust gamma value using Sharp Advanced Presentation Software. (Slide the MOUSE/ADJUSTMENT switch MOUSE ADJ. on the remote control to the ADJ. position.)
  • Sharp XG-V10WU | XG-V10WU Operation Manual - Page 37
    control) MOUSE ADJ. MOUSE ADJ. Wireless mouse/ Laser pointer Projector control Operating the Remote Control Remote Control/Mouse Receiver Positioning • The remote control can be used to control the projector within the ranges shown below. • The remote mouse receiver can be used with the
  • Sharp XG-V10WU | XG-V10WU Operation Manual - Page 38
    / ADJUSTMENT MOUSE ADJ. switch Conference Series BACKLIGHT • For one-button mouse systems, use either the LEFT-CLICK or RIGHT-CLICK button. • Press BACKLIGHT, and the buttons will light up. Green lights refer to mouse operations, and red lights to projector adjustments. Button name Position
  • Sharp XG-V10WU | XG-V10WU Operation Manual - Page 39
    Remote Mouse Receiver You can use the remote control as a remote mouse to operate computers compatible with PS/2 or USB type mouse systems. 1.2.3 4.5.6 Conference Series and USB mouse control cables to the remote mouse receiver. • Windows 95 does not support USB mouse driver software. • The
  • Sharp XG-V10WU | XG-V10WU Operation Manual - Page 40
    ( ) to activate the laser pointer. LASER POINTER 1.2.3 4.5.6 Conference Series MOUSE/ADJUSTMENT MOUSE ADJ. switch • When the button is released the wired remote control input on the bottom of the remote control to the WIRED REMOTE control input terminal on the side of the projector. • The
  • Sharp XG-V10WU | XG-V10WU Operation Manual - Page 41
    GUI (Graphical User Interface) Menu Screen Basic Operations Projector Remote Control 1, 7 2, 3, 5 4 6 6 1.2.3 4.5.6 This projector has two sets of menu screens that allow you to adjust the image and various projector settings. These menu screens can be operated from the projector or the
  • Sharp XG-V10WU | XG-V10WU Operation Manual - Page 42
    menu Picture Fine Sync Audio Options Sub menu Contrast Bright Color Tint Sharp Red Blue CLR Temp Reset ‫מ‬30 ‫ם‬30 ‫מ‬30 ‫ם‬30 ‫מ‬30 ‫ם‬30 ‫מ‬30 ‫ם‬30 Nederlands Français Italiano Svenska Português Status Lamp 1 Lamp 2 Both Lamps Lamp 1 Only Lamp 2 Only Equal Use Front Ceiling‫ם‬Front Rear
  • Sharp XG-V10WU | XG-V10WU Operation Manual - Page 43
    30 Tint ‫מ‬30 ‫ם‬30 Sharp ‫מ‬30 ‫ם‬30 Red ‫מ‬30 ‫ם‬30 Blue ‫מ‬30 ‫ם‬30 CLR Temp ‫מ‬3 ‫ם‬3 Reset Signal Type Progressive Mode Audio PAL-M PAL-N Sharp Custom Blue None Sharp Custom None Display Off Standby Off Display On Main menu Options Sub menu Lamp Timer Lamp Mode PRJ Mode Stack
  • Sharp XG-V10WU | XG-V10WU Operation Manual - Page 44
    " and "Sharp" do not appear for RGB input in INPUT 1 or 2 mode. (Slide the MOUSE/ADJUSTMENT switch MOUSE ADJ. on the remote control to the ADJ. position.) 1 Press MENU. Menu bar and "Picture" menu screen appear. GUI operation guide is also displayed. 2 Press ∂/ƒ to select a specific adjustment item
  • Sharp XG-V10WU | XG-V10WU Operation Manual - Page 45
    color temperature) (High color temperature) (Slide the MOUSE/ADJUSTMENT switch MOUSE ADJ. on the remote control to the ADJ. position.) 1 Press MENU. Menu bar and "Picture" menu screen appear. GUI operation guide is also displayed. 2 Press ∂/ƒ to select "CLR Temp". 3 Press ß/© to move the mark of
  • Sharp XG-V10WU | XG-V10WU Operation Manual - Page 46
    . GUI operation guide is also displayed. 2 Press ∂/ƒ to select "Signal Type", and then press ©. 3 Press ∂/ƒ to select "RGB (VIDEO)" or "Component". 4 Press ENTER to save the setting. 5 To exit from the GUI, press MENU. Basic Operation Projector Remote Control 1, 5 2, 3 4 1.2.3 4.5.6 (GUI
  • Sharp XG-V10WU | XG-V10WU Operation Manual - Page 47
    Adjusting the Computer Images (RGB menu only) Projector Remote Control 1, 5 2, 3, 4 1.2.3 4.5.6 When displaying computer patterns which are very detailed (tiling, vertical stripes, etc.), interference may occur between the LCD pixels, causing flickering, vertical stripes, or contrast
  • Sharp XG-V10WU | XG-V10WU Operation Manual - Page 48
    these settings are stored, they can be easily selected each time you connect a computer to the projector. Saving the adjustment setting (Slide the MOUSE/ADJUSTMENT switch MOUSE ADJ. on the remote control to the ADJ. position.) 1 Press MENU. 2 Press ß/© to select "Fine Sync". 3 Press ∂/ƒ to select
  • Sharp XG-V10WU | XG-V10WU Operation Manual - Page 49
    to select the optimal resolution mode. 5 Press ENTER to save the setting. 6 To exit from the GUI, press MENU. Projector Remote Control 1, 4 2, 3 1.2.3 4.5.6 (GUI) On-screen Display • Avoid displaying computer patterns which repeat every other line (horizontal stripes). (Flickering may occur
  • Sharp XG-V10WU | XG-V10WU Operation Manual - Page 50
    Adjusting the Computer Images (RGB menu only) Projector Remote Control 1, 5 2, 3, 4 AUTO SYNC button 1.2.3 4.5.6 (GUI) On-screen Display Auto Sync Adjustment • Used to automatically adjust a computer image. • Auto Sync adjustment can be made manually by pressing AUTO SYNC, or automatically by
  • Sharp XG-V10WU | XG-V10WU Operation Manual - Page 51
    returned to the factory preset settings. (Slide the MOUSE/ADJUSTMENT switch MOUSE ADJ. on the remote control to the ADJ. position.) 1 Press MENU. 2 Press ß/© to select "Audio". 3 Press ∂/ƒ to select a specific adjustment item. 4 Press ß/© to move the mark of the selected adjustment item to the
  • Sharp XG-V10WU | XG-V10WU Operation Manual - Page 52
    Displaying Dual Pictures (RGB menu only) Projector Remote Control 1, 6 2, 3 4, 5 1.2.3 4.5.6 (GUI) On-screen Display 2 4 input will be displayed. • The audio of the insert picture will come out of the projector's speakers. • Picture in Picture does not work with UXGA signal image. • Picture in
  • Sharp XG-V10WU | XG-V10WU Operation Manual - Page 53
    Image Noise (VIDEO menu only) Projector Remote Control 1, 4 2, 3 1.2.3 4.5.6 (GUI) On-screen Display 3D Digital Noise Reduction (3D DNR) provides high quality images with minimal dot crawl and cross color noise. (Slide the MOUSE/ADJUSTMENT switch MOUSE ADJ. on the remote control to the ADJ
  • Sharp XG-V10WU | XG-V10WU Operation Manual - Page 54
    (MENU, TOOLS, LENS, Power off, Temp., Lamp etc.)). (Slide the MOUSE/ADJUSTMENT switch MOUSE ADJ. on the remote control to the Projector Remote Control 1, 6 2, 3, 4 5 1.2.3 4.5.6 (GUI) On-screen Display The video input system mode is preset to "Auto"; however, it can be changed to a specific
  • Sharp XG-V10WU | XG-V10WU Operation Manual - Page 55
    to the projector via an RS-232C cable. See page 16 in this operation manual, and also the supplied Sharp Advanced Presentation Software operation manual for detailed instructions. Description of Startup Images Selected item Sharp Custom None Description SHARP default image User customized image
  • Sharp XG-V10WU | XG-V10WU Operation Manual - Page 56
    Projector Remote Control 1, 5 2, 3, 4 1.2.3 4.5.6 (GUI) On-screen Display These functions allow you to reduce the power consumption when the projector is in standby mode. Monitor Out/RS-232C Off Function This projector to " " when using the Sharp Advanced Presentation Software (supplied). On-
  • Sharp XG-V10WU | XG-V10WU Operation Manual - Page 57
    . Basic Operation Reversing/Inverting Projected Images Projector Remote Control 1, 6 2, 3, 4 5 1.2.3 4.5.6 (GUI) On-screen Display This projector is equipped with a reverse/invert image function is used for the reversed image and ceiling- mount setups. See page 30 for these setups. E-56
  • Sharp XG-V10WU | XG-V10WU Operation Manual - Page 58
    Selecting the On-screen Display Language Projector Remote Control 1, 5 2, 3 4 1.2.3 4.5.6 (GUI) On-screen Display Portuguese, Chinese, Korean or Japanese. (Slide the MOUSE/ADJUSTMENT switch MOUSE ADJ. on the remote control to the ADJ. position.) 1 Press MENU. 2 Press ß/© to select "Language".
  • Sharp XG-V10WU | XG-V10WU Operation Manual - Page 59
    Displaying the Adjustment Settings Projector Remote Control 1, 4 2 3 1.2.3 4.5.6 This function can be used to display all the adjusted settings on the screen simultaneously. (Slide the MOUSE/ADJUSTMENT switch MOUSE ADJ. on the remote control to the ADJ. position.) 1 Press MENU. 2 Press ß/© to
  • Sharp XG-V10WU | XG-V10WU Operation Manual - Page 60
    Useful Features
  • Sharp XG-V10WU | XG-V10WU Operation Manual - Page 61
    desired baud rate. 5 Press ENTER to save the setting. 6 To exit from the GUI, press MENU. • Make sure that both the projector and computer are set for the same baud rate. Refer to the computer's operation manual for instructions for setting the baud rate. Useful Features & Network Function E-60
  • Sharp XG-V10WU | XG-V10WU Operation Manual - Page 62
    Password Projector Remote Control 1, 6 2, 3 4, 5 1.2.3 4.5.6 (GUI) On-screen Display Setting the Password A password can be set by the user and used with the keylock level to prevent adjustments to certain settings on the GUI. • When password is set, you need to enter the password to use "Lamp
  • Sharp XG-V10WU | XG-V10WU Operation Manual - Page 63
    Network Function
  • Sharp XG-V10WU | XG-V10WU Operation Manual - Page 64
    . Setting the Stacking Mode Useful Features & Network Function Projector Remote Control 1, 6 2, 3, 4 5 1.2.3 4.5.6 (GUI) On-screen Display , Power ON, Power OFF, LENS and MENU can be used. Other buttons cannot be used and are controlled by the master projector or computer through the RS-232C
  • Sharp XG-V10WU | XG-V10WU Operation Manual - Page 65
    stamped presentation tools from the screen, press to select " " and then press ENTER. Red Green Blue Yellow Orange White Black Projector Remote Control 2, 4 3 1.2.3 4.5.6 1, 5 When selecting Sharp default image Displaying the Break Time (Slide the MOUSE/ADJUSTMENT switch MOUSE ADJ. on the
  • Sharp XG-V10WU | XG-V10WU Operation Manual - Page 66
    connection. This projector is also equipped with a function to send status information (lamp usage time, etc.) to a Sharp Service Center or outside contractor for quick and efficient customer service. • For more information on these features, see the operation manuals accompanying the Sharp Advanced
  • Sharp XG-V10WU | XG-V10WU Operation Manual - Page 67
    2nd Floor 1st Floor Video Source 2 RS-422 To Building B This projector can be used in a network of projectors managed from a single PC with the accompanied Sharp Advanced Presentation Software-Professional Edition. Projectors in conference rooms on the first and third floors of a building, for
  • Sharp XG-V10WU | XG-V10WU Operation Manual - Page 68
    . The RS-232C cable (null modem, cross type, sold separately) is connected from the RS-232C output on the Master projector to the RS-232C input on the Slave projector. Projectors can be stacked using an RS-232C cable (null modem, cross type, sold separately). • See page 59, "Deselecting Inputs", and
  • Sharp XG-V10WU | XG-V10WU Operation Manual - Page 69
    Image quality may deteriorate when picture signals are input through multiple projectors in a daisy chain connection. • For more information on this feature, see the operation manuals accompanying the Sharp Advanced Presentation Software- Professional Edition. • When UXGA signal is displayed, the
  • Sharp XG-V10WU | XG-V10WU Operation Manual - Page 70
    73.) • Take the projector to your nearest Authorized Sharp Industrial LCD Products Dealer or Service Center for repair. • Carefully replace the lamp. (See pages 71 and 72.) • Take the projector to your nearest Authorized Sharp Industrial LCD Products Dealer or Service Center for repair. • Securely
  • Sharp XG-V10WU | XG-V10WU Operation Manual - Page 71
    off. Problem • Lamp has been used for over 900 hours. • Lamp has been used for over 1,000 hours. Possible Solution • Purchase a replacement lamp unit (lamp/cage module) of the current type BQC-XGV10WU/1 from your nearest Authorized Sharp Industrial LCD Products Dealer or Service Center. • Replace
  • Sharp XG-V10WU | XG-V10WU Operation Manual - Page 72
    Sharp Industrial LCD Products Dealer or Service Center for repair. Purchase a replacement lamp unit (lamp/cage module) of the current type BQC-XGV10WU/1 from your nearest Authorized Sharp Industrial LCD Products Dealer or Service Center. Then carefully change the lamp by following the instructions
  • Sharp XG-V10WU | XG-V10WU Operation Manual - Page 73
    Fasten the securing screws. ENTER 9 Attach the lamp cage cover. Slide the lamp cage cover in the direction of the arrow (to the close mark) on the back of the projector. Then tighten the user service screw. Maintenance & Troubleshooting • You need to reset lamp timer every time when replacing the
  • Sharp XG-V10WU | XG-V10WU Operation Manual - Page 74
    projector. • The air filter should be exchanged after every 2,000 hours of use. • Have your nearest Authorized Sharp Industrial LCD Products Dealer or Service and press the filter cover into position. Maintenance & Troubleshooting • When resetting the filter cover, be sure the filter is securely
  • Sharp XG-V10WU | XG-V10WU Operation Manual - Page 75
    , push the lens firmly in place, and rotate to the right. Maintenance & Troubleshooting For SHARP Assistance (U.S.A. only) If you encounter any problems during setup or operation of this projector, first refer to the "Troubleshooting" section on this page. If this operation manual does not answer
  • Sharp XG-V10WU | XG-V10WU Operation Manual - Page 76
    Guide to Effective Presentations Electronic presentations are one of the most effective tools such as a VCR, DVD player and laser disc player, can be effective for delivering instructional or illustrative information that is difficult to present. Digital Cameras and Personal Digital Assistants (PDAs)
  • Sharp XG-V10WU | XG-V10WU Operation Manual - Page 77
    Guide to Effective Presentation from SHARP Otpnhreaetsoaefrntehtatetoimoonossmvtisaculol,amtloimsootthnheimns,iesoltreachktaeiorsdnintoofarnteyyapdtey time to proofread and edit your work before your visuals become a permanent part of your presentation. • Mixed case text is easier to read than text
  • Sharp XG-V10WU | XG-V10WU Operation Manual - Page 78
    Guide to Effective Presentations Good Bad Presentation from SHARP 30 25 20 15 10 5 0 Good c. Set-Up When giving a presentation, you need to set the stage both figuratively and literally for success. The way
  • Sharp XG-V10WU | XG-V10WU Operation Manual - Page 79
    Guide completely familiar with the control panel on your projector and remote controls. • If you are using a microphone, check it out before hand and walk around to see where you might have problems with feedback. Avoid standing in these problem
  • Sharp XG-V10WU | XG-V10WU Operation Manual - Page 80
    Connecting Pin Assignments INPUT 1 RGB and OUTPUT (INPUT 1, 2) Signal Input Ports: 15-pin Mini D-sub female connector RGB Input Analog 1. Video input (red) 8. Earth (blue) 5 10 15 1 6 11 2. Video input (green/sync on green) 3. Video input (blue) 4. Reserve input 1 9. Not connected 10. GND
  • Sharp XG-V10WU | XG-V10WU Operation Manual - Page 81
    4-digits O K Return code (0DH) Problem response (communication error or incorrect command) E Projector OK BUTTONS & REMOTE CONTROL KEY BUTTONS & REMOTE CONTROL KEY CONTROL CONTENTS POWER ON POWER OFF VOLUME (0-60) MUTE ON MUTE OFF LENS FOCUS (‫מ‬30 - ‫ם‬30) LENS ZOOM (‫מ‬30 - ‫ם‬30) LENS
  • Sharp XG-V10WU | XG-V10WU Operation Manual - Page 82
    (RS-232C) Specifications and Command Settings E-81 PICTURE BUTTONS & REMOTE CONTROL KEY CONTROL CONTENTS INPUT 1 (RGB 1) RESIZE : NORMAL ) INPUT 3 (RGB 3) SHARP (‫מ‬30 - ‫ם‬30) INPUT 3 (RGB 3) CLR TEMP (‫מ‬3 - ‫ם‬3) INPUT 3 (RGB 3) DISPLAY INPUT 3 (RGB 3) ADJUSTMENT RESET INPUT 1 (RGB 1) SIGNAL
  • Sharp XG-V10WU | XG-V10WU Operation Manual - Page 83
    Specifications RESET LAMP 1 USAGE TIME LAMP 2 USAGE TIME LAMP MODE : BOTH LAMPS LAMP MODE : LAMP 1 ONLY LAMP MODE : LAMP 2 ONLY LAMP MODE : EQUAL USE LAMP QUANTITY LAMP 1 STATUS LAMP _ 1 OK OR ERR P J N A _ _ _ 2 PROJECTOR NAME OPTIONS (1) Appendix • If an underbar (_) appears in the parameter
  • Sharp XG-V10WU | XG-V10WU Operation Manual - Page 84
    Remote Control Terminal Specifications Specifications of wired remote 0 10 0 0 1 0 MENU 1 0 1 1 00 0 1 0 00 1 1 1 0 LENS 1 0 1 1 01 1 0 1 00 0 1 1 0 TOOLS 1 0 1 1 00 1 remote control input, connect the cable from the WIRED REMOTE control input terminal on the projector to the remote Sharp remote
  • Sharp XG-V10WU | XG-V10WU Operation Manual - Page 85
    ן‬864 75.7 80 77.3 85 90.2 100 111.1 120 SXGA 54.8 60 1,152 ‫ ן‬882 65.9 72 67.4 74 LCD display on the notebook computer and output the display data in "CRT only" mode. Details on how to change display modes can be found in your notebook computer's operation manual. • This projector
  • Sharp XG-V10WU | XG-V10WU Operation Manual - Page 86
    Dimensions Rear View Side View Top View Side View 2 15/16 (74.5) 16 5/16 (414.5) 24 29/64 (621.3) 5/32 (3.9) Front View 8 47/64 (221.85) 17 31/64 (444.2) 1 21/32 (42) 14 51/64 (376) Bottom View E-85 1 1/64 (25.65) 3 7/32 (81.85) Units: inches (mm) Appendix
  • Sharp XG-V10WU | XG-V10WU Operation Manual - Page 87
    Extra air filter, Terminal cover, CD-ROM, LCD projector operation manual, LCD projector quick reference, Sharp Advanced Presentation Software operation manual Replacement parts Lamp unit (Lamp/cage module) (BQC-XGV10WU/1), Remote control (RRMCG1564CESA), AA size batteries, Power cord (QACCU5013CEZZ
  • Sharp XG-V10WU | XG-V10WU Operation Manual - Page 88
    . User interface with graphics that allow easier operation. Intelligent compression and expansion High quality resizing of lower and higher resolution images to fit the projector's native resolution. Keylock Mode that can lock the operation of projector buttons to prevent mischief. Lamp Mode
  • Sharp XG-V10WU | XG-V10WU Operation Manual - Page 89
    air filter 13 F FREEZE button 32 G GAMMA button 35 GUI (Graphical User Interface 40 I INPUT buttons 31 INPUT port 11 Input Setting 59 K Keylock Levels 59 L LAMP REPLACEMENT indicators 69 LASER POINTER button 39 LEFT-CLICK button 37 LENS button 29 M MENU button 40 Monitor Out/RS-232C Off
  • Sharp XG-V10WU | XG-V10WU Operation Manual - Page 90
    SHARP CORPORATION E-89 Appendix
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
OPERATION MANUAL
MODEL
XG-V10WU
LCD PROJECTOR
Important
Information
Setup & Connections
Operation Buttons
Basic Operation
Maintenance &
Troubleshooting
Appendix
Useful Features &
Network Function
Lenses are sold separately.