Sharp XG-V10XUL XG-V10XU Operation Manual
Sharp XG-V10XUL Manual
 |
View all Sharp XG-V10XUL manuals
Add to My Manuals
Save this manual to your list of manuals |
Sharp XG-V10XUL manual content summary:
- Sharp XG-V10XUL | XG-V10XU Operation Manual - Page 1
Important Information Setup & Connections Operation Buttons Basic Operation Useful Features & Network Function Maintenance & Troubleshooting OPERATION MANUAL MODEL XG-V10XU LCD PROJECTOR Appendix Lenses are sold separately. - Sharp XG-V10XUL | XG-V10XU Operation Manual - Page 2
XG-V10XU Serial No.: There are two important reasons for prompt warranty registration of your new SHARP LCD Projector, using the REGISTRATION CARD packed with the projector. 1. WARRANTY This is to assure that you immediately receive the full benefit of the parts, service (servicing) instructions in - Sharp XG-V10XUL | XG-V10XU Operation Manual - Page 3
observe the following basic rules for its installation, use and servicing. For your own protection and reliable usage of your LCD Projector a bookcase or rack unless proper ventilation is provided or the manufacturer's instructions have been adhered to. 11. Power Sources This product should be - Sharp XG-V10XUL | XG-V10XU Operation Manual - Page 4
. SEE OPERATION MANUAL. ATTENTION RUPTURE POSSIBLE DE LA LAMPE. DANGER POTENTIEL DE PARTICULES DE VERRE. SE REPORTER AU MODE D'EMPLOI. 104˚F (ם40˚C) 41˚F (ם5˚C) Cautions Concerning the Setup of the Projector For minimal servicing and to maintain high image quality, SHARP recommends that this - Sharp XG-V10XUL | XG-V10XU Operation Manual - Page 5
SAFEGUARDS Temperature Monitor Function If the projector starts to overheat due to setup problems or a dirty air filter, "TEMP." and " " will flash in Install the terminal cover using the two supplied user service screws attached. Optional lenses • Lenses are sold separately. • Be sure to have - Sharp XG-V10XUL | XG-V10XU Operation Manual - Page 6
of light from two lamps. A light axis separation and synthesis prism developed by Sharp enables the efficient combination of light from the two lamps. • Single-/Double-lamp a slight distortion of convergence can be easily adjusted on the service menu screen without having to touch the LCD panel. E-5 - Sharp XG-V10XUL | XG-V10XU Operation Manual - Page 7
10. Advanced Presentation Features • Built-in Presentation Tools, Picture-in-Picture, Digital Enlargement, Freeze • Customizable Startup Screen & Background Screen 11. Application Software • "Sharp Advanced Presentation Software-Professional Edition" (Network and Remote Control) LAN LAN LAN E-6 - Sharp XG-V10XUL | XG-V10XU Operation Manual - Page 8
SAFEGUARDS 2 Outstanding Features 5 Contents 7 How to Access the PDF Operation Manuals 9 Part Names 10 Supplied Accessories 13 Setup & Connections Connections 14 Power a Wired Remote Control 39 Basic Operation Useful Features & Network Function Maintenance & Troubleshooting Appendix E-7 - Sharp XG-V10XUL | XG-V10XU Operation Manual - Page 9
Usage Time 70 Setting the Lamp Mode 71 Replacing the Lamp 71 Replacing the Air Filter 73 Troubleshooting 74 For SHARP Assistance (U.S.A. only) ..... 74 Appendix Guide to Effective Presentations 75 Connecting Pin Assignments 79 (RS-232C) Specifications and Command Settings 80 Wired Remote - Sharp XG-V10XUL | XG-V10XU Operation Manual - Page 10
instructions on the screen. and follow the instructions Sharp Advanced Presentation Software manual. 8 Double click on the pdf file. For Macintosh: 1 Insert the CD-ROM in the CD-ROM drive. 2 Double click on the "CD-ROM" icon. 3 Double click on the "manuals" folder. 4 Double click on the "xg-v10xu - Sharp XG-V10XUL | XG-V10XU Operation Manual - Page 11
Important Information Part Names Numbers next to the part names refer to the main pages in this manual where the topic is explained. Projector Front and Top View 31 MUTE button POWER buttons (ON/OFF) 19 31 VOLUME buttons LENS button 29 ENTER - Sharp XG-V10XUL | XG-V10XU Operation Manual - Page 12
Important Information Part Names Numbers next to the part names refer to the main pages in this manual where the topic is explained. Projector Side and Rear View Speakers Exhaust vent 3 Remote control sensor 36 LED display (ID No.) 63 14 AC socket - Sharp XG-V10XUL | XG-V10XU Operation Manual - Page 13
Important Information Part Names Remote Control Front View MUTE button 31 POWER buttons (ON/OFF) 19 LENS/BLACK 29 SCREEN button 32 RIGHT-CLICK/ 37 ENTER button 40 INPUT 1, 2, 3 button 31 FREEZE button 32 ENLARGE button 33 TOOLS button 64 MOUSE/ ADJUSTMENT 36 switch 1.2.3 4.5.6 Conference - Sharp XG-V10XUL | XG-V10XU Operation Manual - Page 14
QCNW-5680CEZZ Remote mouse receiver RUNTK0673CEZZ Extra air filter PFILD0110CEZZ Terminal cover CCOVA1789CE01 CD-ROM UDSKA0030CEN1 LCD projector operation manual TINS-7222CEZZ LCD projector quick reference TINS-7223CEZZ Sharp Advanced Presentation Software operation manual TINS-7224CEZZ E-13 - Sharp XG-V10XUL | XG-V10XU Operation Manual - Page 15
be turned on last. • Please read the computer's operation manual carefully before making connections. • Refer to page 84 "Computer use with some Macintosh computers. Contact 2 your nearest Authorized Sharp Industrial LCD Products Dealer or Service Center. • AUDIO INPUT 1 can be used to input audio - Sharp XG-V10XUL | XG-V10XU Operation Manual - Page 16
Setup & Connections Projecting Computer Images • This projector uses a 5 BNC computer input to prevent deterioration of image quality. • Connect the R (PR), G/G sync (Y), B (PB), HD/C sync and VD cables (sold separately) to the correct input terminals on the projector and an RGB switcher (sold - Sharp XG-V10XUL | XG-V10XU Operation Manual - Page 17
computer port is not correctly set up. Please refer to the operation manual of the computer for details on setting up/installing the correct mouse some Macintosh computers. Contact your nearest Authorized Sharp Industrial LCD Products Dealer or Service Center. Connecting to a computer using the - Sharp XG-V10XUL | XG-V10XU Operation Manual - Page 18
Setup & Connections Watching Video Images and Laser Disc Images Connecting to a VCR, laser disc player and other audiovisual equipment using the BNC video Input 1 Connect each BNC connector of a component or video cable to the corresponding BNC INPUT 4 or 5 terminals on the projector. • BNC-RCA - Sharp XG-V10XUL | XG-V10XU Operation Manual - Page 19
Setup & Connections Watching DVD and Digital TV Images Connecting to a DVD player, DTV decoder and other component video equipment using the 5 BNC Input 1 Connect each BNC connector of a component cable to the corresponding BNC INPUT 2 terminals on the projector. • BNC-RCA adaptors are needed for - Sharp XG-V10XUL | XG-V10XU Operation Manual - Page 20
Power ON/OFF Turning on the Main Power Press the MAIN POWER switch on the side of the projector. The POWER indicator lights up red and the projector enters standby mode. • When the main power is not on, the remote control cannot be used to operate the projector. Setup & Connections TEMP LAMP2 - Sharp XG-V10XUL | XG-V10XU Operation Manual - Page 21
Setup & Connections Setting Up the Screen Using the Adjustment Feet Using the Adjustment Feet Rotate feet to adjust height of the projector. Up Down • The projector is adjustable up to approximately 5° from the standard position. • When the height of the projector is adjusted, the image may - Sharp XG-V10XUL | XG-V10XU Operation Manual - Page 22
available for specialized application. Please see your local Sharp Industrial LCD Products Dealer to details on all the lenses. (Refer to the lens operation manual when attaching a lens.) Be sure to have service personnel install optional lenses. Throw Distance Screen AN-LV18MX 5Ј11Љ (1.8 m) Throw - Sharp XG-V10XUL | XG-V10XU Operation Manual - Page 23
Setup & Connections Adjusting the Projection Distance AN-LV40EZ Throw distance ratio 1.9 to 2.5:1 Computer and Video Input (4:3) Screen size (4:3) Diag. Width Height 600Љ 480Љ 360Љ 500Љ 400Љ 300Љ 400Љ 320Љ 240Љ 300Љ 240Љ 180Љ 200Љ 160Љ 120Љ 150Љ 120Љ 90Љ 100Љ 80Љ 60Љ 84Љ 67Љ 50Љ 72 - Sharp XG-V10XUL | XG-V10XU Operation Manual - Page 24
Setup & Connections Adjusting the Projection Distance AN-LV18MX Throw distance ratio 0.9 :1 Computer and Video Input (4:3) Screen size (4:3) Diag. Width Height 600Љ 480Љ 360Љ 500Љ 400Љ 300Љ 400Љ 320Љ 240Љ 300Љ 240Љ 180Љ 200Љ 160Љ 120Љ 150Љ 120Љ 90Љ 100Љ 80Љ 60Љ 84Љ 67Љ 50Љ 72Љ 58Љ - Sharp XG-V10XUL | XG-V10XU Operation Manual - Page 25
Setup & Connections Adjusting the Projection Distance AN-LV26EZ Throw distance ratio 1.2 to 1.4 :1 Computer and Video Input (4:3) Screen size (4:3) Diag. Width Height 600Љ 480Љ 360Љ 500Љ 400Љ 300Љ 400Љ 320Љ 240Љ 300Љ 240Љ 180Љ 200Љ 160Љ 120Љ 150Љ 120Љ 90Љ 100Љ 80Љ 60Љ 84Љ 67Љ 50Љ - Sharp XG-V10XUL | XG-V10XU Operation Manual - Page 26
Setup & Connections Adjusting the Projection Distance AN-LV36EZ Throw distance ratio 1.7 to 2.7 :1 Computer and Video Input (4:3) Screen size (4:3) Diag. Width Height 600Љ 480Љ 360Љ 500Љ 400Љ 300Љ 400Љ 320Љ 240Љ 300Љ 240Љ 180Љ 200Љ 160Љ 120Љ 150Љ 120Љ 90Љ 100Љ 80Љ 60Љ 84Љ 67Љ 50Љ - Sharp XG-V10XUL | XG-V10XU Operation Manual - Page 27
Setup & Connections Adjusting the Projection Distance AN-LV55EZ Throw distance ratio 2.6 to 3.7 :1 Computer and Video Input (4:3) Screen size (4:3) Diag. Width Height 600Љ 480Љ 360Љ 500Љ 400Љ 300Љ 400Љ 320Љ 240Љ 300Љ 240Љ 180Љ 200Љ 160Љ 120Љ 150Љ 120Љ 90Љ 100Љ 80Љ 60Љ 84Љ 67Љ 50Љ - Sharp XG-V10XUL | XG-V10XU Operation Manual - Page 28
Setup & Connections Adjusting the Projection Distance AN-LV80EZ Throw distance ratio 3.8 to 5.3 :1 Computer and Video Input (4:3) Screen size (4:3) Diag. Width Height 600Љ 480Љ 360Љ 500Љ 400Љ 300Љ 400Љ 320Љ 240Љ 300Љ 240Љ 180Љ 200Љ 160Љ 120Љ 150Љ 120Љ 90Љ 100Љ 80Љ 60Љ 84Љ 67Љ 50Љ - Sharp XG-V10XUL | XG-V10XU Operation Manual - Page 29
Setup & Connections Adjusting the Projection Distance Upper and Lower Lens Shift Position • This projector is equipped with a lens shift function that lets you adjust the projection height. • Adjust to match the setup configuration. Screen size: 100 inches (254 cm) Computer and Video Input: 4:3 AN- - Sharp XG-V10XUL | XG-V10XU Operation Manual - Page 30
Setup & Connections LENS Button Projector Remote Control 1, 4a 3 2 4b 4b On-screen Display (Example: 4:3 NORMAL image) 1.2.3 4.5.6 On-screen Display (Example: 16:9 WIDE image) Digital Image Adjustments This function can be used to adjust the focus, zoom, lens shift, keystone and digital - Sharp XG-V10XUL | XG-V10XU Operation Manual - Page 31
ceiling-mount bracket for this installation. • Before mounting the projector, contact your nearest Authorized Sharp Industrial LCD Products Dealer or Service Center to obtain the recommended ceilingmount bracket (sold separately). (AN-XGCM70 ceiling-mount bracket, AN-EP101AP extension tube for AN - Sharp XG-V10XUL | XG-V10XU Operation Manual - Page 32
Operation Buttons Using the Operation Buttons Selecting the Input Signal Source Projector Remote Control Press INPUT 1.2.3 or INPUT 4.5.6 again to change the mode. INPUT buttons 1.2.3 4.5.6 • When no signal is received, "NO SIGNAL" will be displayed. When a signal that the projector is not - Sharp XG-V10XUL | XG-V10XU Operation Manual - Page 33
Operation Buttons Superimposing a Black Screen Projector Remote Control BLACK SCREEN button This function can be used to superimpose a black screen over the projected image. Blacking out the Projected Image Press BLACK SCREEN. The screen turns black and "BLACK SCREEN" is displayed on the screen. - Sharp XG-V10XUL | XG-V10XU Operation Manual - Page 34
Operation Buttons s Magnifying a Specific Portion of an Image Projector Remote Control 2 1 3 1.2.3 4.5.6 3 On-screen Display ן4 This function allows you to magnify a specific portion of an image. This is useful when you want to display a detailed portion of the image. (Slide the MOUSE/ - Sharp XG-V10XUL | XG-V10XU Operation Manual - Page 35
Operation Buttons Adjusting the Picture Aspect Ratio Projector Remote Control 1 2 1.2.3 4.5.6 2 COMPUTER Input Signal NORMAL Output screen image FULL DOT BY DOT FOR 4:3 aspect ratio RESIZE NORMAL RESIZE DOT BY DOT FOR 4:3 aspect ratio (1024 ן768) RESIZE NORMAL This function - Sharp XG-V10XUL | XG-V10XU Operation Manual - Page 36
GAMMA 2 Gives greater depth to darker portions of image for a more exciting theater experience. CUSTOM Allows you to adjust gamma value using Sharp Advanced Presentation Software. (Slide the MOUSE/ADJUSTMENT switch MOUSE ADJ. on the remote control to the ADJ. position.) 1 Press GAMMA. Each time - Sharp XG-V10XUL | XG-V10XU Operation Manual - Page 37
Selecting the Remote Control Mode Operation Buttons Using the Remote Control as a Wireless Mouse The remote control has the following three functions: • Projector control • Wireless mouse • Laser pointer MOUSE/ADJUSTMENT switch (Remote control) MOUSE ADJ. MOUSE ADJ. Wireless mouse/ Laser - Sharp XG-V10XUL | XG-V10XU Operation Manual - Page 38
Operation Buttons Operating the Remote Control Use as a Wireless Mouse Be sure the supplied remote mouse receiver is connected to your computer. Slide the MOUSE/ADJUSTMENT switch to MOUSE. MOUSE mode buttons BLACK SCREEN MOUSE RIGHT-CLICK 1.2.3 4.5.6 LASER POINTER LEFT-CLICK MOUSE/ - Sharp XG-V10XUL | XG-V10XU Operation Manual - Page 39
damage your computer. • Do not connect both the PS/2 and USB mouse control cables to the remote mouse receiver. • Windows 95 does not support USB mouse driver software. • The minimum system requirements for the USB type mouse system are shown below. Windows Hardware: PC/AT compatible machine with - Sharp XG-V10XUL | XG-V10XU Operation Manual - Page 40
Operation Buttons Using as a Laser Pointer Use as a Laser Pointer Slide the MOUSE/ADJUSTMENT switch to MOUSE, and press LASER POINTER ( ) to activate the laser pointer. LASER POINTER 1.2.3 4.5.6 Conference Series MOUSE/ADJUSTMENT MOUSE ADJ. switch • When the button is released, the light - Sharp XG-V10XUL | XG-V10XU Operation Manual - Page 41
Using the GUI (Graphical User Interface) Menu Screen Basic Operations Projector Remote Control 1, 7 2, 3, 5 4 6 6 1.2.3 4.5.6 This projector has two sets of menu screens that allow you to adjust the image and various projector settings. These menu screens can be operated from the projector - Sharp XG-V10XUL | XG-V10XU Operation Manual - Page 42
ן480 • • 7 Vert Freq 75 Hz 72 Hz Resolution 1 2 • • 7 Resolution Hor Freq Vert Freq 640ן480 37.5 kHz 72 Hz Normal Level A Level B Sharp Custom Blue None Sharp Custom None Display Off Standby Off Display On Main menu Options Sub menu Lamp Timer Lamp Mode PRJ Mode Stack Setting Keylock - Sharp XG-V10XUL | XG-V10XU Operation Manual - Page 43
Video Component 2D Progressive 3D Progressive Film Mode Normal Level A Level B Auto PAL (50/60Hz) SECAM NTSC4.43 NTSC3.58 PAL-M PAL-N Sharp Custom Blue None Sharp Custom None Display Off Standby Off Display On Main menu Options Sub menu Lamp Timer Lamp Mode PRJ Mode Stack Setting Keylock Level - Sharp XG-V10XUL | XG-V10XU Operation Manual - Page 44
items are returned to the factory preset settings. • "Color", "Tint" and "Sharp" do not appear for RGB input in INPUT 1 or 2 mode. (Slide the 1 Press MENU. Menu bar and "Picture" menu screen appear. GUI operation guide is also displayed. 2 Press ∂/ƒ to select a specific adjustment item. 3 Press - Sharp XG-V10XUL | XG-V10XU Operation Manual - Page 45
MOUSE/ADJUSTMENT switch MOUSE ADJ. on the remote control to the ADJ. position.) 1 Press MENU. Menu bar and "Picture" menu screen appear. GUI operation guide is also displayed. 2 Press ∂/ƒ to select "CLR Temp". 3 Press ß/© to move the mark of the selected adjustment item to the desired setting. 4 To - Sharp XG-V10XUL | XG-V10XU Operation Manual - Page 46
/ADJUSTMENT switch MOUSE ADJ. on the remote control to the ADJ. position.) 1 Press MENU. Menu bar and "Picture" menu screen appear. GUI operation guide is also displayed. 2 Press ∂/ƒ to select "Signal Type", and then press ©. 3 Press ∂/ƒ to select "RGB (VIDEO)" or "Component". 4 Press ENTER to save - Sharp XG-V10XUL | XG-V10XU Operation Manual - Page 47
Adjusting the Computer Images (RGB menu only) Projector Remote Control 1, 5 2, 3, 4 1.2.3 4.5.6 When displaying computer patterns which are very detailed (tiling, vertical stripes, etc.), interference may occur between the LCD pixels, causing flickering, vertical stripes, or contrast - Sharp XG-V10XUL | XG-V10XU Operation Manual - Page 48
Adjusting the Computer Images (RGB menu only) Projector Remote Control 1, 6 2, 3, 4 5 1.2.3 4.5.6 (GUI) On-screen Display 2 3 3 Saving and Selecting Adjustment Settings This projector allows you to store up to seven adjustment settings for use with various computers. Once these settings are - Sharp XG-V10XUL | XG-V10XU Operation Manual - Page 49
Adjusting the Computer Images (RGB menu only) Projector Remote Control 1, 6 2, 3, 4 5 1.2.3 4.5.6 (GUI) On-screen Display Special Mode Adjustment Ordinarily, the type of input signal is detected and the correct resolution mode is automatically selected. However, for some signals, the optimal - Sharp XG-V10XUL | XG-V10XU Operation Manual - Page 50
-screen Display • Automatic adjustments can be made by pressing AUTO SYNC. • When the optimum image cannot be achieved with Auto Sync adjustment, use manual adjustments. (See page 46.) During Auto Sync adjustment, the On-screen Display changes as shown on the left. • Auto Sync adjustment may take - Sharp XG-V10XUL | XG-V10XU Operation Manual - Page 51
Adjusting the Sound Projector Remote Control 1, 5 2, 3, 4 1.2.3 4.5.6 (GUI) On-screen Display 2 3 This projector's audio is factory preset to standard settings. However, you can adjust it to suit your own preferences by adjusting the following audio settings. Description of Adjustment Items - Sharp XG-V10XUL | XG-V10XU Operation Manual - Page 52
Displaying Dual Pictures (RGB menu only) Projector Remote Control 1, 6 2, 3 4, 5 1.2.3 4.5.6 (GUI) On-screen Display 2 4 Picture in Picture function allows you to display two pictures on the same screen. You can display the image input from INPUT 4 or 5 as an inset picture overlapping the - Sharp XG-V10XUL | XG-V10XU Operation Manual - Page 53
Reducing Image Noise (VIDEO menu only) Projector Remote Control 1, 4 2, 3 1.2.3 4.5.6 (GUI) On-screen Display 3D Digital Noise Reduction (3D DNR) provides high quality images with minimal dot crawl and cross color noise. (Slide the MOUSE/ADJUSTMENT switch MOUSE ADJ. on the remote control - Sharp XG-V10XUL | XG-V10XU Operation Manual - Page 54
Turning On/Off the On-screen Display Projector Remote Control 1, 6 2, 3, 4 5 1.2.3 4.5.6 (GUI) On-screen Display This function allows you to turn on or off the on-screen messages that appear during input select. Description of OSD Display Selected item Normal Level A Level B Description All - Sharp XG-V10XUL | XG-V10XU Operation Manual - Page 55
RS-232C cable. See page 16 in this operation manual, and also the supplied Sharp Advanced Presentation Software operation manual for detailed instructions. Description of Startup Images Selected item Sharp Custom None Description SHARP default image User customized image (i.e. company logo) Black - Sharp XG-V10XUL | XG-V10XU Operation Manual - Page 56
Out/RS232C". 4 Press ß/© to select " " or " ". 5 To exit from the GUI, press MENU. CAUTION • Set "MNTR Out/RS232C" to " " when using the Sharp Advanced Presentation Software (supplied). On-screen Display (GUI) On-screen Display Automatic Power Shutoff Function When no input signal is detected for - Sharp XG-V10XUL | XG-V10XU Operation Manual - Page 57
Selecting the Economy Mode Projector Remote Control 1, 6 2, 3, 4 5 1.2.3 4.5.6 (GUI) On-screen Display ID No. Display Off Function The LED ID number display on the rear of the projector, used when controlling multiple projectors, can be turned on or off. Description of ID No. Display - Sharp XG-V10XUL | XG-V10XU Operation Manual - Page 58
Selecting the On-screen Display Language Projector Remote Control 1, 5 2, 3 4 1.2.3 4.5.6 (GUI) On-screen Display English is the preset language for the On-screen Display; however, this can be changed to German, Spanish, Dutch, French, Italian, Swedish, Portuguese, Chinese, Korean or Japanese - Sharp XG-V10XUL | XG-V10XU Operation Manual - Page 59
Displaying the Adjustment Settings Projector Remote Control 1, 4 2 3 1.2.3 4.5.6 This function can be used to display all the adjusted settings on the screen simultaneously. (Slide the MOUSE/ADJUSTMENT switch MOUSE ADJ. on the remote control to the ADJ. position.) 1 Press MENU. 2 Press ß/© to - Sharp XG-V10XUL | XG-V10XU Operation Manual - Page 60
Useful Features - Sharp XG-V10XUL | XG-V10XU Operation Manual - Page 61
from the GUI, press MENU. • Make sure that both the projector and computer are set for the same baud rate. Refer to the computer's operation manual for instructions for setting the baud rate. Useful Features & Network Function E-60 - Sharp XG-V10XUL | XG-V10XU Operation Manual - Page 62
Protecting Important Settings with a Password Projector Remote Control 1, 6 2, 3 4, 5 1.2.3 4.5.6 (GUI) On-screen Display Setting the Password A password can be set by the user and used with the keylock level to prevent adjustments to certain settings on the GUI. • When password is set, you - Sharp XG-V10XUL | XG-V10XU Operation Manual - Page 63
Network Function - Sharp XG-V10XUL | XG-V10XU Operation Manual - Page 64
Controling Multiple Projectors with ID Numbers Projector Remote Control 1, 6 2, 3, 4 5 1.2.3 4.5.6 (GUI) On-screen Display This projector can form a network of up to 250 projectors. To identify separately and control specified projector, you need to set ID No.. The ID No. you set is displayed - Sharp XG-V10XUL | XG-V10XU Operation Manual - Page 65
screen, press to select " " and then press ENTER. Red Green Blue Yellow Orange White Black Projector Remote Control 2, 4 3 1.2.3 4.5.6 1, 5 When selecting Sharp default image Displaying the Break Time (Slide the MOUSE/ADJUSTMENT switch MOUSE ADJ. on the remote control to the ADJ. position - Sharp XG-V10XUL | XG-V10XU Operation Manual - Page 66
status information (lamp usage time, etc.) to a Sharp Service Center or outside contractor for quick and efficient customer service. • For more information on these features, see the operation manuals accompanying the Sharp Advanced Presentation Software- Professional Edition and optional boards - Sharp XG-V10XUL | XG-V10XU Operation Manual - Page 67
an optional LAN board can provide management of projectors over an existing network. • For more information on these features, see the operation manuals accompanying the Sharp Advanced Presentation Software- Professional Edition and optional RS-422 board. Useful Features & Network Function E-66 - Sharp XG-V10XUL | XG-V10XU Operation Manual - Page 68
Operating the Network Function 3. Simultaneous multiple projector control for stacking and videowall projection Stack Projection Useful Features & Network Function Distributor DVD Laser Disc INPUT1 INPUT2 INPUT4 INPUT5 Master OUTPUT OUTPUT RS-232C IN RS-232C OUT INPUT1 INPUT2 INPUT4 INPUT5 - Sharp XG-V10XUL | XG-V10XU Operation Manual - Page 69
when picture signals are input through multiple projectors in a daisy chain connection. • For more information on this feature, see the operation manuals accompanying the Sharp Advanced Presentation Software- Professional Edition. • When UXGA signal is displayed, the videowall can not be set by - Sharp XG-V10XUL | XG-V10XU Operation Manual - Page 70
warn you when to change a lamp. • If a problem occurs, either the TEMPERATURE WARNING indicator or the LAMP REPLACEMENT indicators .) • Take the projector to your nearest Authorized Sharp Industrial LCD Products Dealer or Service Center for repair. • Carefully replace the lamp. Troubleshooting E-69 - Sharp XG-V10XUL | XG-V10XU Operation Manual - Page 71
for lamp replacement. Maintenance & Troubleshooting Condition The LAMP REPLACEMENT indicator lights the picture, and the power will turn off. Problem • Lamp has been used for over 900 hours. • /1 from your nearest Authorized Sharp Industrial LCD Products Dealer or Service Center. • Replace the - Sharp XG-V10XUL | XG-V10XU Operation Manual - Page 72
a replacement lamp unit (lamp/cage module) of the current type BQC-XGV10WU/1 from your nearest Authorized Sharp Industrial LCD Products Dealer or Service Center. Then carefully change the lamp by following the instructions on the next page. If you wish, you may have the lamp replaced at your nearest - Sharp XG-V10XUL | XG-V10XU Operation Manual - Page 73
. Slide the lamp cage cover in the direction of the arrow (to the close mark) on the back of the projector. Then tighten the user service screw. Maintenance & Troubleshooting • You need to reset lamp timer every time when replacing the lamp and confirm it to be reset on "Lamp Timer" menu. E-72 - Sharp XG-V10XUL | XG-V10XU Operation Manual - Page 74
hours of use. • Have your nearest Authorized Sharp Industrial LCD Products Dealer or Service Center exchange the filter (PFILD0110CEZZ). Front View Air cover opening and press the filter cover into position. Maintenance & Troubleshooting • When resetting the filter cover, be sure the filter is - Sharp XG-V10XUL | XG-V10XU Operation Manual - Page 75
place, and rotate to the right. Maintenance & Troubleshooting For SHARP Assistance (U.S.A. only) If you encounter any problems during setup or operation of this projector, first refer to the "Troubleshooting" section on this page. If this operation manual does not answer your question, please call - Sharp XG-V10XUL | XG-V10XU Operation Manual - Page 76
Guide to Effective Presentations Electronic presentations are one of the most effective tools such as a VCR, DVD player and laser disc player, can be effective for delivering instructional or illustrative information that is difficult to present. Digital Cameras and Personal Digital Assistants (PDAs) - Sharp XG-V10XUL | XG-V10XU Operation Manual - Page 77
Guide to Effective Presentations • Background colors can subconsciously affect the audience: . Green-stimulates interaction. Black Presentation from SHARP Otpnhreaetsoaefrntehtatetoimoonossmvtisaculol,amtloimsootthnheimns,iesoltreachktaeiorsdnintoofarnteyyapdtey.pfoenotsf Sans-serif Serif Black - Sharp XG-V10XUL | XG-V10XU Operation Manual - Page 78
Guide to Effective Presentations Good Bad Presentation from SHARP 30 25 20 15 10 5 0 Good c. Set-Up When giving a presentation, you need to set the stage both figuratively and literally for success. The way - Sharp XG-V10XUL | XG-V10XU Operation Manual - Page 79
Guide to Effective Presentations d. Rehearsing & Delivery • The best time to rehearse is the it out before hand and walk around to see where you might have problems with feedback. Avoid standing in these problem areas during your presentation. e. Presentation Tips • Before beginning, visualize - Sharp XG-V10XUL | XG-V10XU Operation Manual - Page 80
Connecting Pin Assignments INPUT 1 RGB and OUTPUT (INPUT 1, 2) Signal Input Ports: 15-pin Mini D-sub female connector RGB Input Analog 1. Video input (red) 8. Earth (blue) 5 10 15 1 6 11 2. Video input (green/sync on green) 3. Video input (blue) 4. Reserve input 1 9. Not connected 10. GND - Sharp XG-V10XUL | XG-V10XU Operation Manual - Page 81
C1 C2 C3 C4 P1 P2 P3 P4 Return code (0DH) Command 4-digits Response code format Normal response Parameter 4-digits O K Return code (0DH) Problem response (communication error or incorrect command) E R R Return code (0DH) When more than one code is being sent, send each command only after - Sharp XG-V10XUL | XG-V10XU Operation Manual - Page 82
30 - ם30) INPUT 3 (RGB 3) BLUE (מ30 - ם30) INPUT 3 (RGB 3) COLOR (מ30 - ם30) INPUT 3 (RGB 3) TINT (מ30 - ם30) INPUT 3 (RGB 3) SHARP (מ30 - ם30) INPUT 3 (RGB 3) CLR TEMP (מ3 - ם3) INPUT 3 (RGB 3) DISPLAY INPUT 3 (RGB 3) ADJUSTMENT RESET INPUT 1 (RGB 1) SIGNAL TYPE : RGB INPUT - Sharp XG-V10XUL | XG-V10XU Operation Manual - Page 83
.58 VIDEO SYSTEM SELECTION : PAL_M VIDEO SYSTEM SELECTION : PAL_N BACKGROUND SELECTION : SHARP BACKGROUND SELECTION : CUSTOM BACKGROUND SELECTION : BLUE BACKGROUND SELECTION : NONE STARTUP IMAGE SELECTION : SHARP STARTUP IMAGE SELECTION : CUSTOM STARTUP IMAGE SELECTION : NONE MONITOR OUT OFF MONITOR - Sharp XG-V10XUL | XG-V10XU Operation Manual - Page 84
are fixed at "10110". • Codes C14 and C15 are reverse confirmation bits, with "10" indicating "Front" and "01" indicating "Rear". Sharp remote control signal format Transmission format: 15-bit format D D D D D D D D D D D D D 67.5 ms 67.5 ms Wave form of output signal: Output using - Sharp XG-V10XUL | XG-V10XU Operation Manual - Page 85
and output the display data in "CRT only" mode. Details on how to change display modes can be found in your notebook computer's operation manual. • This projector can receive 640 ן350 VESA format VGA signals, however, "640 ן400" will appear on the screen. • When receiving 1,600 ן1,200 VESA - Sharp XG-V10XUL | XG-V10XU Operation Manual - Page 86
Dimensions Rear View Side View Top View Side View 2 15/16 (74.5) 16 5/16 (414.5) 24 29/64 (621.3) 5/32 (3.9) Front View 8 47/64 (221.85) 17 31/64 (444.2) 1 21/32 (42) 14 51/64 (376) Bottom View E-85 1 1/64 (25.65) 3 7/32 (81.85) Units: inches (mm) Appendix - Sharp XG-V10XUL | XG-V10XU Operation Manual - Page 87
Specifications Product type LCD Projector Model XG-V10XU Video system PAL/PAL 60/PAL-M/PAL-N/SECAM/NTSC 3. , Terminal cover, CD-ROM, LCD projector operation manual, LCD projector quick reference, Sharp Advanced Presentation Software operation manual Replacement parts Lamp unit (Lamp/cage module) ( - Sharp XG-V10XUL | XG-V10XU Operation Manual - Page 88
images in their native resolution. DVI Digital Visual Interface that supports both digital and analog displays. GAMMA Image quality enhancement image to display it on the WIDE screen. Stack Setting Prevents trouble with adjustment and operation when stack projecting. When setting two projectors - Sharp XG-V10XUL | XG-V10XU Operation Manual - Page 89
Index A AC socket 14 Adjusting the Picture 43 Adjustment Feet 20 ADJUSTMENT switch 12 Air filter 73 Aspect ratio 34 Audio 50 Audio cable 18 AUDIO INPUT terminals 11 AUDIO OUTPUT terminals 11 Automatic power shutoff function 55 Auto sync adjustment 49 AUTO SYNC button 49 B Background - Sharp XG-V10XUL | XG-V10XU Operation Manual - Page 90
SHARP CORPORATION E-89 Appendix
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
-
79
-
80
-
81
-
82
-
83
-
84
-
85
-
86
-
87
-
88
-
89
-
90
 |
 |
OPERATION MANUAL
MODEL
XG-V10XU
LCD PROJECTOR
Important
Information
Setup & Connections
Operation Buttons
Basic Operation
Maintenance &
Troubleshooting
Appendix
Useful Features &
Network Function
Lenses are sold separately.