Sharp XR-30X Operation Manual
Sharp XR-30X - XGA DLP Projector Manual
 |
UPC - 074000365223
View all Sharp XR-30X manuals
Add to My Manuals
Save this manual to your list of manuals |
Sharp XR-30X manual content summary:
- Sharp XR-30X | Operation Manual - Page 1
MULTIMEDIA PROJECTOR MODEL XR-40X XR-30X XR-30S OPERATION MANUAL Introduction Quick Start Setup Connections Basic Operation Useful Features Appendix - Sharp XR-30X | Operation Manual - Page 2
IMPORTANT • For your assistance in reporting the loss or theft of your Projector, please record the Model and Serial Number located on the bottom of the projector and retain this information. • Before recycling the packaging, please ensure that you have checked the contents of the carton thoroughly - Sharp XR-30X | Operation Manual - Page 3
elsewhere into a 13A socket outlet, as a serious electric shock may occur. To fit an appropriate plug to the mains lead, follow the instructions below: WARNING: THIS APPARATUS MUST BE EARTHED. IMPORTANT: The wires in this mains lead are coloured in accordance with the following code: Green - Sharp XR-30X | Operation Manual - Page 4
, German, French, Swedish, Spanish, Italian, Dutch, Portuguese, Chinese and Korean. Carefully read through the operation instructions before operating the projector. Die mitgelieferte CD-ROM enthält Bedienungsanleitungen in Englisch, Deutsch, Französisch, Schwedisch, Spanisch, Italienisch, Niederl - Sharp XR-30X | Operation Manual - Page 5
operation manual carefully. Introduction ENGLISH There are two important reasons for prompt warranty registration of your new SHARP Projector, using the REGISTRATION CARD packed with the projector. 1. WARRANTY This is to assure that you immediately receive the full benefit of the parts, service - Sharp XR-30X | Operation Manual - Page 6
and, if not installed and used in accordance with the operation manual, may cause harmful interference to radio communications. However, there is /TV technician for help. U.S.A. ONLY Declaration of conformity SHARP PROJECTOR, MODEL XR-40X/XR-30X/XR-30S This device complies with Part 15 of the FCC - Sharp XR-30X | Operation Manual - Page 7
operate all models in the same manner. • In this operation manual, the illustration and the screen display are simplified for explanation, projector. Note .........Indicates additional information for setting up and operating the projector. For Future Reference Maintenance P. 47 Troubleshooting - Sharp XR-30X | Operation Manual - Page 8
Distance .. 20 Connections Connecting the Projector to Other Equipment 21 Controlling the Projector by a Guide 42 Reversing/Inverting Projected Images 42 Selecting the On-screen Display Language 42 Adjusting the Projector 45 Troubleshooting with the "Help" Menu ... 46 Utilizing the "Help - Sharp XR-30X | Operation Manual - Page 9
Installing the Lamp Unit 51 Resetting the Lamp Timer 52 Connecting Pin Assignments 53 RS-232C Specifications and Command Settings 55 Computer Compatibility Chart 60 Troubleshooting 61 For SHARP Assistance 63 Specifications 64 Dimensions 65 Index 66 5 - Sharp XR-30X | Operation Manual - Page 10
the following basic rules for its installation, use and servicing. 1. Read Instructions All the safety and operating instructions should be read before the product is operated. 2. Retain Instructions The safety and operating instructions should be retained for future reference. 3. Heed Warnings All - Sharp XR-30X | Operation Manual - Page 11
operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions, as an improper adjustment of or other hazards. 20. Safety Check Upon completion of any service or repairs to this product, ask the service technician to perform safety - Sharp XR-30X | Operation Manual - Page 12
should only be performed by a Sharp Authorized Projector Dealer or Service Center. Do not set up the projector in places exposed to direct sunlight temperature of the projector is from 41°F to 95°F (+5°C to +35°C). ■ The storage temperature of the projector is from -4°F to 140°F (-20°C to +60°C). - Sharp XR-30X | Operation Manual - Page 13
the operation manuals of the projector and the equipment to be connected for instructions on how to make the connections. Using the projector in other you are in. Temperature monitor function ■ If the projector starts to overheat due to setup problems or blockage of the air vents, " " and - Sharp XR-30X | Operation Manual - Page 14
* Use the power cord that corresponds to the wall outlet in your country. • Operation manual (this manual and CD-ROM ) Note • Codes in "< >" are Replacement on the region. Please check with your nearest Sharp Authorized Projector Dealer or Service Center. 10 - Sharp XR-30X | Operation Manual - Page 15
Functions Numbers in Z refer to the main pages in this operation manual where the topic is explained. Projector Top View Power indicator 25, 48 STANDBY/ON 25 button For turning the power on and putting the projector into standby mode. ENTER button For setting 37 items selected or adjusted - Sharp XR-30X | Operation Manual - Page 16
Numbers in Z refer to the main pages in this operation manual where the topic is explained. Rear View Terminals AUDIO 1 projector has a Kensington Security Standard connector for use with a Kensington MicroSaver Security System. Refer to the information that came with the system for instructions - Sharp XR-30X | Operation Manual - Page 17
STANDBY button 25 For putting the projector into the standby mode. COMPUTER, DVI, 29 S-VIDEO, VIDEO buttons For switching to the respective input modes. BREAK TIMER 32 button For displaying the break - Sharp XR-30X | Operation Manual - Page 18
from leaked batteries is harmful to skin, therefore ensure you wipe them first and then remove them using a cloth. • The batteries included with this projector may run down in a short period, depending on how they are kept. Be sure to replace them as soon as possible with new batteries. • Remove - Sharp XR-30X | Operation Manual - Page 19
Usable Range The remote control can be used to control the projector within the ranges shown in the illustration. Remote control sensor under a fluorescent lamp. In this case, move the projector away from the fluorescent lamp. 30° 23n (7 m) Remote control Remote control signal transmitters 15 - Sharp XR-30X | Operation Manual - Page 20
computer). For details, see the page described below for each step. Setup and Projection In this section, connection of the projector and the computer is explained using one example. 3 STANDBY/ON 8 button 6 INPUT buttons 4 ENTER button 5 Adjustment buttons (P/R/O/Q) 8 STANDBY button 3 ON - Sharp XR-30X | Operation Manual - Page 21
Quick Start 4. Adjust the projected image with the Setup Guide 1 After the projector turns on, the Setup Guide appears. (When "Setup Guide" is set to "On". See page 42.) 2 Follow the steps in the Setup Guide and adjust the focus, picture size, and height (angle). 3 After adjusting the focus, height - Sharp XR-30X | Operation Manual - Page 22
page 20 for additional information concerning "Screen Size and Projection Distance". Ceiling-mount Setup ■ It is recommended that you use the optional Sharp ceiling-mount bracket for this installation. Before mounting the projector, contact your nearest Sharp Authorized Projector Dealer or Service - Sharp XR-30X | Operation Manual - Page 23
Projection (PRJ) Mode The projector can use any of the 4 projection modes shown in the diagram below. Select the mode most appropriate for the projection setting in use. (You can - Sharp XR-30X | Operation Manual - Page 24
Setting up the Projector (Continued) Screen Size and Projection Distance NORMAL 11Ј 3Љ) 4.0 m (13Ј) 90 cm (35Љ) 2.9 m (9Ј 8Љ) 3.4 m (11Ј 2Љ) 75 cm (29Љ) 2.4 m (8Ј) 2.8 m (9Ј 3Љ) 50 cm (20Љ) 1.6 m (5Ј 4Љ) 1.9 m (6Ј 2Љ) 69 cm (27 19/64Љ) 62 cm (24 9/16Љ) 55 cm (21 53/64Љ) 42 cm (16 3/8Љ) 37 cm - Sharp XR-30X | Operation Manual - Page 25
Chart" for a list of computer signals compatible with the projector. Use with computer signals other than those listed may cause some keys simultaneously when using a SHARP notebook computer). Refer to the specific instructions in your computer's operation manual to enable your computer's - Sharp XR-30X | Operation Manual - Page 26
provided by the video equipment manufacturer. • When you connect video equipment with a 21-pin RGB output (Euro-scart) to the projector, use a commercially available cable that fits in the projector terminal you want to connect. • The projector does not support RGBC signals via the Euro-scart. 22 - Sharp XR-30X | Operation Manual - Page 27
Cable ø3.5 mm ø3.5 mm stereo or mono audio cable audio output (commercially available or available terminal as Sharp service part QCNWGA038WJPZ) Terminal on the projector AUDIO 1 Monitor Amplifier RCA audio output terminal RCA audio cable (commercially available) AUDIO 2 Audio output terminal - Sharp XR-30X | Operation Manual - Page 28
if your computer terminal is not correctly set up. Refer to the operation manual of the computer for details. • See pages 53 and 54 for connection the RS-232C terminal on the computer. This may damage your computer or projector. • Do not connect or disconnect an RS-232C serial control cable to - Sharp XR-30X | Operation Manual - Page 29
. Blinking in green: The lamp is warming up. Red: The lamp is shut down abnormally or the lamp should be replaced. • When switching on the projector, a slight flickering of the image may be experienced within the first minute after the lamp has been illuminated. This is normal operation as the lamp - Sharp XR-30X | Operation Manual - Page 30
Image Projection Setup Guide screen About the Setup Guide After turning on the projector, the Setup Guide screen appears to assist you with projector setup. Guidance items 1 FOCUS 2 HEIGHT ADJUST 3 ZOOM Press ENTER to exit the Setup Guide screen. Note • The Setup Guide screen automatically high- - Sharp XR-30X | Operation Manual - Page 31
can be adjusted using the adjustment feet at the front and rear of the projector. When the screen is above the projector, the projection image can be made higher by adjusting the projector. 1 Lift the projector to adjust its height while lifting the HEIGHT ADJUST lever. 2 Remove your hands from - Sharp XR-30X | Operation Manual - Page 32
up to an angle of approximately ±20 degrees (when the resize mode is set to "NORMAL" (see page 30)). 1 Press KEYSTONE to enter the Keystone Correction mode. • You can also display the on-screen display of the Keystone Correction mode with KEYSTONE on the projector. 2 Press P/Q or O/R to adjust the - Sharp XR-30X | Operation Manual - Page 33
for the connected equipment. Press COMPUTER, DVI, S-VIDEO or VIDEO on the remote control to select the input mode. • When you press INPUT on the projector or DVI on the remote control, the INPUT list appears. Press P/R to switch the INPUT mode. COMPUTER, DVI, S-VIDEO, VIDEO buttons AV MUTE button - Sharp XR-30X | Operation Manual - Page 34
1400 K 1050) SXGA (1280 K 1024) WXGA (1280 K 768) NORMAL XR-40X/30X XR-30S BORDER XR-40X/30X XR-30S STRETCH XR-40X/30X XR-30S 1024 K 768 800 K 600 768 K 576 600 K 450 1024 K 576 800 K 450 J J Input Signal Computer XR-40X/30X XR-30S Image type NORMAL Output screen image BORDER STRETCH - Sharp XR-30X | Operation Manual - Page 35
VIDEO • "STRETCH" is fixed when 540P, 720P, 1035I or 1080I signals are entered. Input Signal DVD / Video Image type NORMAL * Output screen image BORDER * STRETCH 4:3 aspect ratio * * 480I, 480P, 576I, Letter box 576P, NTSC, PAL, SECAM * Squeezed 16:9 image * Squeezed 4:3 image * 16:9 - Sharp XR-30X | Operation Manual - Page 36
set in units of one minute (up to 60 minutes). Switching the Eco+Quiet Mode Press ECO+QUIET on the remote control or on the projector to switch the Eco+Quiet mode between on and off. • When the Eco+Quiet Mode is set to "ON", the sound of the cooling fan - Sharp XR-30X | Operation Manual - Page 37
only when RGB signal is input. Auto Sync (Auto Sync Adjustment) Auto Sync function works when detecting input signal after the projector turns on. Press AUTO SYNC to manually adjust with Auto Sync function. Note • When the optimum image cannot be achieved with Auto Sync adjustment, use the help - Sharp XR-30X | Operation Manual - Page 38
projector with the remote control. For details, see the operation manual of the receiver. Connecting with a USB cable Computer To USB terminal Remote receiver To USB terminal (optional, AN-MR2) or USB cable (commercially available or available as Sharp service that do not support USB. • - Sharp XR-30X | Operation Manual - Page 39
projector. - ADJ Picture Mode Contrast Bright Color Tint Sharp CLR Temp Bright Boost Progressive Lamp Setting Reset Shift Keystone OSD Display Background Setup Guide PRJ Mode Language SCR - ADJ VIDEO. *5 Adjustment range for XR-40X/XR-30X. *6 Adjustment range for XR-30S. Resize Page 41 Image - Sharp XR-30X | Operation Manual - Page 40
Menu Items (Continued) "Projector adjustment (PRJ-ADJ)" menu Picture SCR - ADJ Auto Power Off Auto Restart STANDBY Mode System Sound Speaker Audio Input RS-232C Fan Mode System Lock - Sharp XR-30X | Operation Manual - Page 41
button Useful Features Menu Selections (Adjustments) Example: Adjusting "Bright". • This operation can also be performed by using the buttons on the projector. 1 Press MENU/HELP. • The "Picture" menu screen for the selected input mode is displayed. 2 Press Q or O and select "Picture" to adjust - Sharp XR-30X | Operation Manual - Page 42
Standard 0 15 0 0 0 1 Bright Help 5 Press MENU/HELP. • The menu screen will disappear. SEL./ADJ. Single ADJ END Note • Menu buttons do not function while the projector is operating the "Auto Sync", "Break Timer", "FREEZE", or "AV MUTE" functions. 38 - Sharp XR-30X | Operation Manual - Page 43
END Menu operation n Page 37 Q Example: "Picture" screen menu for S-VIDEO input Picture SCR - ADJ Picture Mode Contrast Bright Color Tint Sharp CLR Temp Bright Boost Progressive Lamp Setting Reset PRJ - ADJ Help Standard 0 0 0 0 0 0 1 3D Progressive Bright SEL./ADJ. ENTER END 1 Selecting - Sharp XR-30X | Operation Manual - Page 44
For less color intensity. For making skin tones purplish. For less sharpness. For high fidelity color reproduction. For more contrast. For more recording with the original encoded as is at 24 frames/second. The projector can convert this film source to progressive video at 60 frames/second with - Sharp XR-30X | Operation Manual - Page 45
Help 1 Resize 2 Image Shift 3 Keystone 4 OSD Display 5 Background 6 Setup Guide 7 PRJ Mode 8 Language Border 0 0 On Logo On Front English Menu operation • The Keystone Correction can be adjusted up to an angle of approximately ±20 degrees (when "Resize" is set to "Normal"). Note • You cannot - Sharp XR-30X | Operation Manual - Page 46
Language Selectable items Logo Blue None Description Sharp logo screen Blue screen - 6 Selecting the Setup Guide Selectable items On Off Description Displaying the Setup Guide when turning the projector on. Not displaying the Setup Guide. The projector can switch the on-screen display language - Sharp XR-30X | Operation Manual - Page 47
The monitor output and RS-232C functions are switched off in standby mode. The monitor output and RS-232C functions are activated even if the projector is in standby mode. 1 Auto Power Off Function Selectable items On Off Description When no input signal is detected for more than 15 minutes, the - Sharp XR-30X | Operation Manual - Page 48
keycode in a safe place where only authorized users have access. Info • If you lose or forget your keycode, contact your nearest Sharp Authorized Projector Dealer or Service Center (see page 63). Even if the product warranty is valid, the keycode reset will incur a charge. a Setting/Changing the - Sharp XR-30X | Operation Manual - Page 49
, you can release the keylock by holding down ENTER and STANDBY/ON on the projector simultaneously for about 5 seconds. Info • Keylock does not function while the projector is: displaying the "Setup Guide" or "Menu" screens, in standby mode, warming up, changing input signals, operating "Auto Sync - Sharp XR-30X | Operation Manual - Page 50
marks (✔). • The items in the "Help" menu change, de- pending on the input signal or setting that you have selected. • If the problem is not solved, refer to "Troubleshooting". (see pages 61 and 62) • When selecting "sRGB" in "Picture Mode", the item "Color is faded or poor" is not displayed. This - Sharp XR-30X | Operation Manual - Page 51
use volatile agents such as insecticides on the projector. Do not attach rubber or plastic items to the projector for long periods. The effects of some of agents in the plastic may cause damage to the quality or finish of the projector. ■ Wipe off dirt gently with a soft flannel cloth. ■ When the - Sharp XR-30X | Operation Manual - Page 52
and temperature warning indicator) on the projector indicate problems inside the projector. ■ If a problem occurs, either the temperature warning indicator or the lamp indicator will illuminate red, and the projector will enter standby mode. After the projector has entered standby mode, follow the - Sharp XR-30X | Operation Manual - Page 53
indicator Normal Off Abnormal Red on (Standby) Problem The internal temperature is abnormally high. Lamp • Carefully replace the lamp. (See page 51.) • Take the projector to your nearest Sharp Authorized Projector Dealer or Service Center (see page 63) for repair. • Please exercise care when - Sharp XR-30X | Operation Manual - Page 54
cool before removing the lamp unit. ■ Carefully change the lamp by following the instructions described in this section. * If you wish, you may have the lamp replaced at your nearest Sharp Authorized Projector Dealer or Service Center. * If the new lamp does not light after replacement, take your - Sharp XR-30X | Operation Manual - Page 55
lamp until it has fully cooled down (about 1 hour). STANDBY/ON button AC socket User service screw (for lamp unit cover) 3 Remove the lamp unit cover. • Turn the projector over. Loosen the user service screw (1) that secures the lamp unit cover. Remove the lamp unit cover (2). 1 2 Appendix 51 - Sharp XR-30X | Operation Manual - Page 56
and place it while pressing the tab (2) to close it. Then tighten the user service screw (3) to secure the lamp unit cover. Info • If the lamp unit will not turn on, even if the power cord is connected to the projector. Securing screws Resetting the Lamp Timer Reset the lamp timer after replacing - Sharp XR-30X | Operation Manual - Page 57
14. +5V power 15. Ground Pin No. Signal 16. Hot plug detection 17. T.M.D.S data 0- 18. T.M.D.S data 0+ 19. T.M.D.S data 0 shield 20. Not connected 21. Not connected 22. T.M.D.S clock shield 23. T.M.D.S clock+ 24. T.M.D.S clock- RS-232C Terminal: mini DIN 9 pin female connector - Sharp XR-30X | Operation Manual - Page 58
CI Note • Depending on the controlling device used, it may be necessary to connect Pin 4 and Pin 6 on the controlling device (e.g. computer). Projector Pin No. 4 5 6 Computer Pin No. 4 5 6 USB Terminal: Type B USB connector 43 Pin No. 1. 2. 3. 4. Signal VCC USB- USB+ SG Name USB power USB - Sharp XR-30X | Operation Manual - Page 59
Return code (0DH) Command 4-digit Response code format Normal response Parameter 4-digit Problem response (communication error or incorrect command) O K Return code (0DH) E R R Return code (0DH) Info • When controlling the projector using RS-232C commands from a computer, wait for at least 30 - Sharp XR-30X | Operation Manual - Page 60
15, 30, 45 T L T L _ _ _ 1 0% - 100%(Integer) T N A M _ _ _ 1 XR40X / XR30X / XR30S M N R D _ _ _ 1 XR-40X / XR-30X / XR-30S P J N 1 * * * * OK or ERR P J N 2 * * * * OK or ERR P J N 3 * * * * OK or ERR P J N 0 _ _ _ 1 Projector Name I R G B _ _ _ 1 OK or ERR ERR I R G B _ _ _ 2 OK or ERR ERR - Sharp XR-30X | Operation Manual - Page 61
Blue -30 - +30 R A B E _ * * * OK or ERR Color -30 - +30 R A C O _ * * * OK or ERR Tint -30 - +30 R A T I _ * * * OK or ERR Sharp -30 - +30 R A S H _ * * * OK or ERR CLR Temp -2 - +2 R A C T _ _ * * OK or ERR Bright Boost 0 - +2 R A W E _ _ _ * OK or ERR Progressive 2D Progressive - Sharp XR-30X | Operation Manual - Page 62
Bright -30 - +30 V A B R _ * * * OK or ERR Color -30 - +30 V A C O _ * * * OK or ERR Tint -30 - +30 V A T I _ * * * OK or ERR Sharp -30 - +30 V A S H _ * * * OK or ERR CLR Temp -2 - +2 V A C T _ _ * * OK or ERR Bright Boost 0 - +2 V A W E _ _ _ * OK or ERR Progressive 2D Progressive - Sharp XR-30X | Operation Manual - Page 63
Off Standard Eco Reverse On Off Invert On Off English Deutsch Español Nederlands Français Italiano Svenska Português polski Türkçe Setup Guide On Off System Sound On Off Internal Speaker On Off RGB Frequency Horizontal Check Vertical Fan Mode Normal High Lamp Timer - Sharp XR-30X | Operation Manual - Page 64
The following is a list of modes that conform to VESA. However, this projector supports other signals that are not VESA standards. PC/MAC PC MAC 13" MAC 75 VESA Standard ✔ ✔ ✔ ✔ DVI-D Support ✔ ✔ ✔ ✔ Display XR-40X/ XR-30X XR-30S Upscale Upscale True True Intelligent Compression Intelligent - Sharp XR-30X | Operation Manual - Page 65
Troubleshooting Problem No picture and no sound or projector does not start. Sound is heard but no picture appears (or picture is dark). Check • Projector appear depending on the computer. • Cables are incorrectly connected to the projector. 26 20 - 46 46 - 21-24 Picture appears but no sound is - Sharp XR-30X | Operation Manual - Page 66
Troubleshooting (Continued) Problem Check Maintenance indicator on • See "Maintenance Indicators". the projector illuminates or blinks in red. The projector cannot be turned on or put into the standby mode using STANDBY/ON on the projector. • The keylock is set. If the keylock is set to "ON", - Sharp XR-30X | Operation Manual - Page 67
If you encounter any problems during setup or operation of this projector, first refer to the "Troubleshooting" section on pages 61 and 62. If this operation manual does not answer your question, please contact the SHARP Service departments listed below. U.S.A. Sharp Electronics Corporation 1-888 - Sharp XR-30X | Operation Manual - Page 68
XR-40X/XR-30X/XR-30S 0.55" DLP® Chip XR-40X/XR-30X XGA (1024 × 768) XR-30S SVGA (800 × 600) F 2.5 - 2.6 Manual, ×1.15 (f = 20.4 - 23.5 mm) Manual (2.9 kg) As a part of policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement - Sharp XR-30X | Operation Manual - Page 69
Dimensions Units: inches (mm) 1/4 (6) 10 7/16 (265) 1 31/64 2 5/8 (66.35) (37.65) 3 33/64 (89) 2 61/64 (75) 10 41/64 (270) 2 3/8 (60) M4 M4 M4 M4 13/32 (10) 13/32 (10) 2 61/64 (75) 1 27/64 (36) 1 3/16 (30) 1 15/16 (49) 4 7/64 (104) 65 Appendix - Sharp XR-30X | Operation Manual - Page 70
50, 51 Resize 30, 41 RESIZE button 30 RGB cable 21 RS-232C terminal 24 SCR - ADJ 41 Screen Size and Projection Distance 20 Setup Guide 26, 42 Sharp 40 Speaker 43 SPOT button 32 STANDBY button 25 STANDBY Mode 43 STANDBY/ON button 25 STRETCH 30, 31 Supplied accessories 10 S-VIDEO button - Sharp XR-30X | Operation Manual - Page 71
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
 |
 |
MULTIMEDIA PROJECTOR
MODEL
XR-40X
XR-30X
XR-30S
OPERATION MANUAL
Introduction
Quick Start
Setup
Connections
Basic
Operation
Useful
Features
Appendix