Sharp XR-50S XR-55S XR-55X Operation Manual
Sharp XR-50S Manual
 |
View all Sharp XR-50S manuals
Add to My Manuals
Save this manual to your list of manuals |
Sharp XR-50S manual content summary:
- Sharp XR-50S | XR-55S | XR-55X Operation Manual - Page 1
MUTIMEDIA PROJECTOR MODEL XR-55X XR-50S OPERATION MANUAL Introduction Easy Start Setup Connections Basic Operation Useful Features Appendix - Sharp XR-50S | XR-55S | XR-55X Operation Manual - Page 2
IMPORTANT • For your assistance in reporting the loss or theft of your Projector, please record the Model and Serial Number located on the bottom of the projector and retain this information. • Before recycling the packaging, please ensure that you have checked the contents of the carton thoroughly - Sharp XR-50S | XR-55S | XR-55X Operation Manual - Page 3
shock may occur. To fit an appropriate plug to the mains lead, follow the instructions below: WARNING: THIS APPARATUS MUST BE EARTHED. IMPORTANT: The wires in this mains for the European Union Community Market SHARP ELECTRONICS (Europe) GmbH Sonninstraße 3, D-20097 Hamburg E.U. ONLY iii - Sharp XR-50S | XR-55S | XR-55X Operation Manual - Page 4
German, French, Spanish, Italian, Dutch, Swedish, Portuguese, Chinese, Korean and Arabic. Carefully read through the operation instructions before operating the projector. Die mitgelieferte CD-ROM enthält Bedienungsanleitungen in Englisch, Deutsch, Französisch, Spanisch, Italienisch, Niederländisch - Sharp XR-50S | XR-55S | XR-55X Operation Manual - Page 5
manual carefully. Introduction ENGLISH There are two important reasons for prompt warranty registration of your new SHARP Projector, using the REGISTRATION CARD packed with the projector. 1. WARRANTY This is to assure that you immediately receive the full benefit of the parts, service - Sharp XR-50S | XR-55S | XR-55X Operation Manual - Page 6
accordance with the operation manual, may cause harmful interference ONLY Declaration of conformity SHARP PROJECTOR, MODEL XR-55X/XR-50S This device instructions described on pages 56 to 58. * If you wish, you may have the lamp replaced at your nearest Sharp Authorized Projector Dealer or Service - Sharp XR-50S | XR-55S | XR-55X Operation Manual - Page 7
from the actual display. The examples used throughout this manual are based on the XR-55X model. Using the Menu Screen Select from the Quick Start projector. Note ....... Indicates additional information for setting up and operating the projector. For Future Reference Maintenance Troubleshooting - Sharp XR-50S | XR-55S | XR-55X Operation Manual - Page 8
to Read this Operation Manual ......3 Contents 4 IMPORTANT SAFEGUARDS 6 How to Access the PDF Operation Manuals 10 Accessories 11 Part Projector On/Off 25 Turning the Projector On 25 Turning the Power Off (Putting the Projector into Standby Mode 25 Image Projection 26 About the Setup Guide - Sharp XR-50S | XR-55S | XR-55X Operation Manual - Page 9
Introduction Adjusting the Projector Function ("PRJ-ADJ1/2" Menu 49 Auto Sync (Auto Sync Adjustment) ......... 49 Auto Assignments 59 RS-232C Specifications and Commands 61 Computer Compatibility Chart 66 Troubleshooting 67 For SHARP Assistance 68 Specifications 70 Dimensions 71 Index 72 5 - Sharp XR-50S | XR-55S | XR-55X Operation Manual - Page 10
the following basic rules for its installation, use and servicing. 1. Read Instructions All the safety and operating instructions should be read before the product is operated. 2. Retain Instructions The safety and operating instructions should be retained for future reference. 3. Heed Warnings All - Sharp XR-50S | XR-55S | XR-55X Operation Manual - Page 11
normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions, as an improper adjustment of 20. Safety Check Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine that - Sharp XR-50S | XR-55S | XR-55X Operation Manual - Page 12
in these environments will not reduce the overall operation life of the unit. Internal cleaning should only be performed by a Sharp Authorized Projector Dealer or Service Center. Rest your eyes occasionally. ■ Continuously watching the screen for long hours will cause eye strain. Take regular breaks - Sharp XR-50S | XR-55S | XR-55X Operation Manual - Page 13
the AC outlet and turning off the equipment to be connected. ■ Please read the operation manuals of the projector and the equipment to be connected for instructions on how to make the connections. Using the projector in other countries ■ The power supply voltage and the shape of the plug may vary - Sharp XR-50S | XR-55S | XR-55X Operation Manual - Page 14
Computer" icon. 3 Double click the "CD-ROM" drive. 4 Double click the "MANUALS" folder. 5 Double click the model (name of the folder) that you want to view you want to view. 7 Double click the pdf file to access the projector manuals. Note • If the desired pdf file cannot be opened by double clicking - Sharp XR-50S | XR-55S | XR-55X Operation Manual - Page 15
Two R-6 batteries RGB cable for XR-55X for XR-50S ("AA" size, UM/SUM projector depends on the region. Use the power cord that corresponds to the wall outlet in your country. • Operation manuals (this manual , Operation Manual Sharp Authorized Projector Dealer or Service Center. 11 - Sharp XR-50S | XR-55S | XR-55X Operation Manual - Page 16
and Functions Numbers in Z refer to the main pages in this operation manual where the topic is explained. 10 11 12 1 16 2 13 14 indicator 54 13 STANDBY/ON button 25 For turning the power on and putting the projector into Standby mode. 14 INPUT buttons (P/R) 29 For switching Input mode. 15 AUTO - Sharp XR-50S | XR-55S | XR-55X Operation Manual - Page 17
11 Rear View (Terminals) 1 RS-232C terminal 24 Terminal for controlling the projector using a computer. 2 USB terminal 34 Terminal connecting with the USB terminal on foot 27 12 Security bar Using the Kensington Lock • This projector has a Kensington Security Standard connector for use with a - Sharp XR-50S | XR-55S | XR-55X Operation Manual - Page 18
manual where the topic is explained. 1 2 3 14 4 15 5 16 6 7 17 8 18 9 19 10 20 11 21 12 22 13 23 1 ON button 25 For turning the power on. 2 STANDBY button 25 For putting the projector 22 3D MODE button (XR-55X only) See the Operation Manual for Stereoscopic 3D Projection - Sharp XR-50S | XR-55S | XR-55X Operation Manual - Page 19
fluid from leaked batteries is harmful to skin, therefore ensure you wipe them first and then remove them using a cloth. • The batteries included with this projector may run down in a short period, depending on how they are kept. Be sure to replace them as soon as possible with new batteries. • Remove - Sharp XR-50S | XR-55S | XR-55X Operation Manual - Page 20
with the computer). For details, see the page described below for each step. Setup and Projection In this section, connection of the projector and the computer is explained using one example. 3 STANDBY/ON 8 button 8 STANDBY button 6 O/Q buttons 3 ON button 6 INPUT buttons 6 INPUT buttons - Sharp XR-50S | XR-55S | XR-55X Operation Manual - Page 21
4. Adjust the projected image with the Setup Guide 1 After the projector turns on, the Setup Guide appears. (When "Setup Guide" is set to "On". See page 48.) 2 Follow the steps in the Setup Guide and adjust the focus, height (angle) and picture size. 3 After adjusting the focus, height (angle) and - Sharp XR-50S | XR-55S | XR-55X Operation Manual - Page 22
so will eliminate the need for Keystone correction and provide the best image quality. (See page 28.) Standard Setup (Front Projection) ■ Place the projector at the required distance from the screen according to the desired picture size. (See page 19.) Indication of the Projection Image Size and - Sharp XR-50S | XR-55S | XR-55X Operation Manual - Page 23
±31 cm (±12 1/4") ±25 cm (±9 13/16") ±21 cm (±8 11/64") ±17 cm (±6 17/32") ±12 cm (±4 29/32") ±8 cm (±3 17/64") When using the projector with screen sizes not listed in the above charts, calculate the values according to the formulas. L1: Minimum projection distance (m/ft) L2: Maximum projection - Sharp XR-50S | XR-55S | XR-55X Operation Manual - Page 24
Rear"] aCeiling-Mount Setup It is recommended that you use the optional Sharp ceiling-mount adaptor and unit for this installation. Before mounting the projector, contact your nearest Sharp Authorized Projector Dealer or Service Center to obtain the recommended ceiling-mount adaptor and unit (sold - Sharp XR-50S | XR-55S | XR-55X Operation Manual - Page 25
equipment to be connected. After making all connections, turn on the projector and then the other pieces of equipment. When connecting a computer keys simultaneously when using a SHARP notebook computer). Refer to the specific instructions in your computer's operation manual to enable your computer's - Sharp XR-50S | XR-55S | XR-55X Operation Manual - Page 26
Cables for a camera or a video game VIDEO Note • When you connect video equipment with a 21-pin RGB output (Euro-scart) to the projector, use a commercially available cable that fits in the projector terminal you want to connect. • The projector does not support RGBC signals via the Euro-scart. 22 - Sharp XR-50S | XR-55S | XR-55X Operation Manual - Page 27
Cable ø3.5 mm ø3.5 mm stereo or mono audio cable audio output (commercially available or available terminal as Sharp service part QCNWGA038WJPZ) Terminal on the projector AUDIO 1 Monitor RCA audio output terminal RCA audio cable (commercially available) AUDIO 2 Audio output terminal Cables - Sharp XR-50S | XR-55S | XR-55X Operation Manual - Page 28
if your computer terminal is not correctly set up. Refer to the operation manual of the computer for details. • See pages 59 and 60 for connection the RS-232C terminal on the computer. This may damage your computer or projector. • Do not connect or disconnect an RS-232C serial control cable to - Sharp XR-50S | XR-55S | XR-55X Operation Manual - Page 29
. Blinking in green: The lamp is warming up. Red: The lamp is shut down abnormally or the lamp should be replaced. • When switching on the projector, a slight flickering of the image may be experienced within the first minute after the lamp has been illuminated. This is normal operation as the lamp - Sharp XR-50S | XR-55S | XR-55X Operation Manual - Page 30
Image Projection About the Setup Guide After turning on the projector, the Setup Guide screen appears to assist you with projector setup. Guidance items 1 FOCUS 2 HEIGHT ADJUST 3 ZOOM Press ENTER to exit the Setup Guide screen. Note • The Setup Guide screen automatically highlights the items in the - Sharp XR-50S | XR-55S | XR-55X Operation Manual - Page 31
to correct the distortion. (See pages 28 and 46.) 3 Adjusting the Picture Size You can adjust the picture size using the zoom ring on the projector. Rotate the zoom ring to enlarge or shrink the picture size. • Using the knob on the zoom ring will make the adjustments easier. Rear adjustment - Sharp XR-50S | XR-55S | XR-55X Operation Manual - Page 32
Note • The Keystone Correction can be adjusted up to an angle of approximately ±40 (XR-55X)/ ±20 (XR-50S) degrees and the screen can also be set up to an angle of approximately ±40 (XR-55X)/±20 (XR-50S) degrees. 1 Press KEYSTONE to enter the Keystone Correction mode. RETURN button KEYSTONE button - Sharp XR-50S | XR-55S | XR-55X Operation Manual - Page 33
to external equipment, the volume level of the external equipment changes in accordance with the volume level of the projector. Set the projector's volume to the lowest level when turning the projector on/off or when changing the input signal. • When you do not want to output the sound from the - Sharp XR-50S | XR-55S | XR-55X Operation Manual - Page 34
image. Depending on the input signal, you can choose a desired image. Press RESIZE. • See page 46 for setting on menu screen. COMPUTER RESIZE button XR-55X XR-50S Main resolution SVGA (800 × 600) XGA (1024 × 768) SXGA (1280 × 1024) 1280 × 800 SVGA (800 × 600) XGA (1024 × 768) SXGA (1280 × 1024 - Sharp XR-50S | XR-55S | XR-55X Operation Manual - Page 35
VIDEO/DTV Input signal Video/DTV Image type NORMAL For 4:3 screen AREA ZOOM V-STRETCH For 16:9 screen BORDER 16:9 *1 *1 480I, 480P, 576I, 576P, NTSC, PAL, SECAM 4:3 aspect ratio Squeeze *1 *1 *1 *1 Letter box 720P, 1035I, *1 1080I, 1080P 16:9 aspect ratio 16:9 aspect ratio - Sharp XR-50S | XR-55S | XR-55X Operation Manual - Page 36
minute (up to 60 minutes). Canceling the break timer display function Press BREAK TIMER. Note • The Break Timer is not available while the projector is operating the following functions. - Auto Sync - Freeze - AV Mute - Input Search 32 2 Press SPOT again. • The spot area will disappear. Switching - Sharp XR-50S | XR-55S | XR-55X Operation Manual - Page 37
Auto Sync (Auto Sync Adjustment) Displaying an Enlarged Portion of an Image Auto Sync function works when detecting input signal after the projector turns on. Press AUTO SYNC to manually adjust with Auto Sync function. Note • When the optimum image cannot be achieved with Auto Sync adjustment, use - Sharp XR-50S | XR-55S | XR-55X Operation Manual - Page 38
projector with the remote control. For details, see the operation manual of the receiver. Connecting with a USB cable Computer To USB terminal Remote receiver To USB terminal (optional, AN-MR2) or USB cable (commercially available or available as Sharp service Mac OS® that support USB. • - Sharp XR-50S | XR-55S | XR-55X Operation Manual - Page 39
following shows the items that can be set in the projector. "Quick Start Menu" Main menu Quick Start Menu Movie Game sRGB*1 Contrast -30 +30 Bright -30 +30 Color -30 +30 *2 Tint -30 +30 *2 Sharp -30 +30 *2 Red -30 +30 Blue -30 +30 Page 42 CLR Temp -1 1 Page 42 BrilliantColor - Sharp XR-50S | XR-55S | XR-55X Operation Manual - Page 40
On/Off] Page 47 OSD Display [On/Off] Page 47 Closed Caption Page 47 Background Page 48 Setup Guide [On/Off] Page 48 PRJ Mode Page 48 Wall Color Page 48 Language Page 48 Sub menu Normal Svenska Português polski Magyar Türkçe *7 Adjustment range for XR-55X. *8 Adjustment range for XR-50S. 36 - Sharp XR-50S | XR-55S | XR-55X Operation Manual - Page 41
"Projector adjustment (PRJ-ADJ1/2)" menu Main menu PRJ-ADJ1 Page 49 Auto Sync [On/Off] Page 49 Auto Power Off [On/Off] Page 49 Auto Page 52 DLP® LinkTM Invert Page 52 All Reset Page 52 Lamp Timer (Life) Page 52 Quick Start Eco *9 *9 *9 This item is available for XR-55X only. 37 Useful Features - Sharp XR-50S | XR-55S | XR-55X Operation Manual - Page 42
when the menu is displayed. MENU button Menu Selections (Quick Start Menu) • This operation can also be performed by using the buttons on the projector. 1 Press MENU. • The "Quick Start Menu" screen for the selected Input mode is displayed. 2 Press P or R to select the desired item, then press - Sharp XR-50S | XR-55S | XR-55X Operation Manual - Page 43
Pressing an operation button during input searching cancels the search. Manually change the resolution. Use this function when the image and "Bright". • This operation can also be performed by using the buttons on the projector. 1 Press MENU. • The "Quick Start Menu" screen is displayed. Example: - Sharp XR-50S | XR-55S | XR-55X Operation Manual - Page 44
Eco+Quiet Reset SEL./ADJ. SCR PRJ1 PRJ2 Standard 0 15 0 0 0 1 On Level 2 Off Single ADJ END Note • The MENU button is not available while the projector is operating: - Auto Sync/Break Timer/Freeze/AV Mute/Input Search 40 - Sharp XR-50S | XR-55S | XR-55X Operation Manual - Page 45
For standard image Presentation Brightens portions of image for more enhanced presentations. Movie Gives natural tint to the projected image. Game Gives sharpness to the projected image. *sRGB For high fidelity reproduction of images from a computer. The default settings of each item when - Sharp XR-50S | XR-55S | XR-55X Operation Manual - Page 46
making the effect weaker. Q button For more contrast. For more brightness. For more color intensity. For making skin tones greenish. For more sharpness. For stronger red. For stronger blue. For making the effect stronger. *1 Not displayed in the RGB input mode. *2 Not adjustable/selectable when - Sharp XR-50S | XR-55S | XR-55X Operation Manual - Page 47
. Films are not detected. Note • This function is available for the following signals. With COMPUTER/COMPONENT input: - 480I - 576I - 1035I (XR-55X only) - 1080I (XR-55X only) With S-VIDEO or VIDEO input: - All signals Menu operation n Page 39 7 Eco+Quiet Selectable items On Off Brightness and - Sharp XR-50S | XR-55S | XR-55X Operation Manual - Page 48
Signal Adjustment ("SIG-ADJ" Menu) Menu operation n Page 39 Pict. SIG-ADJ SCR PRJ1 PRJ2 Clock 0 Phase 0 1 H-Pos 0 V-Pos Reset 2 Resolution 3 Signal Type 0 1024 x 768 Auto 4 Video System 5 Video Setup 6 Signal Info : 1024 x 768 H 48.3 kHz / V Auto 0 IRE 60.0 Hz SEL./ADJ. ENTER END - Sharp XR-50S | XR-55S | XR-55X Operation Manual - Page 49
Menu operation n Page 39 4 Setting the Video System 6 Checking the Input Signal The video input system mode is factory preset to "Auto"; however, a clear picture from the connected audio-visual equipment may not be received, depending on the Video signal difference. In that case, switch the Video - Sharp XR-50S | XR-55S | XR-55X Operation Manual - Page 50
Image Shift 3 Keystone 4 Overscan 5 OSD Display 6 Closed Caption 7 Background 8 Setup Guide 9 PRJ Mode 0 Wall Color Normal 0 0 On On Off Logo On Front Off Correction can be adjusted up to an angle of approximately ±40(XR-55X)/ ±20(XR-50S) degrees. • You can also press KEYSTONE on the remote - Sharp XR-50S | XR-55S | XR-55X Operation Manual - Page 51
Resize mode Normal Area Zoom V-Stretch 16:9 Keystone Correction -40 − +40 (XR-55X only) -12 − +12 • "Closed Caption" is a system which allows are poor or if there are problems at the broadcast source. This does not necessarily indicate a problem with the projector. • If any button is - Sharp XR-50S | XR-55S | XR-55X Operation Manual - Page 52
the Background Image Selectable items Description Logo Sharp logo screen Blue Blue screen None - 8 Selecting the Setup Guide Selectable items Description On Displaying the Setup Guide when turning the projector on. Off Not displaying the Setup Guide. 0 Selecting the Wall Color This - Sharp XR-50S | XR-55S | XR-55X Operation Manual - Page 53
may take some time to complete, depending on the image of the computer connected to the projector. • When the optimum image cannot be achieved with Auto Sync adjustment, use manual adjustments. (See page 44.) 2 Auto Power Off Function Selectable items Description On When no input signal - Sharp XR-50S | XR-55S | XR-55X Operation Manual - Page 54
keycode in a safe place where only authorized users have access. Info • If you lose or forget your keycode, contact your nearest Sharp Authorized Projector Dealer or Service Center (see page 69). Even if the product warranty is valid, the keycode reset will incur a charge. aSetting/Changing the - Sharp XR-50S | XR-55S | XR-55X Operation Manual - Page 55
display Info • Even when Keylock function is set to "On", STANDBY/ON on the projector can be used to turn on and off the power. • Keylock cannot be set while the projector is: displaying the "Setup Guide" or "Menu" screens, in Standby mode, warming up, changing input signals, operating the Auto - Sharp XR-50S | XR-55S | XR-55X Operation Manual - Page 56
and RS-232C are activated even if the projector is in Standby mode. DLP® LinkTM (XR-55X only) See the Operation Manual for Stereoscopic 3D Projection provided separately. DLP® LinkTM Invert (XR-55X only) See the Operation Manual for Stereoscopic 3D Projection provided separately. Checking the - Sharp XR-50S | XR-55S | XR-55X Operation Manual - Page 57
for long periods. The effects of some of the agents in the plastic may cause damage to the quality or finish of the projector. ■ Wiping with a hard cloth or using strong force may scratch the cabinet surface. ■ Wipe off dirt gently with a soft flannel cloth. Using a chemical cloth (wet/ - Sharp XR-50S | XR-55S | XR-55X Operation Manual - Page 58
and temperature warning indicator) on the projector indicate problems inside the projector. ■ If a problem occurs, either the temperature warning indicator or the lamp indicator will illuminate red, and the projector will enter Standby mode. After the projector has entered Standby mode, follow the - Sharp XR-50S | XR-55S | XR-55X Operation Manual - Page 59
Problem Cause Possible Solution Temperature Off Red blinks The internal • Temperatures • Use the projector in an warning (On)/ temperature is around the projector Lamp circuit failure • Take the projector to your nearest Sharp Authorized Projector Dealer or Service Center (see page 69) - Sharp XR-50S | XR-55S | XR-55X Operation Manual - Page 60
cool before removing the lamp unit. ■ Carefully change the lamp by following the instructions described in this section. * If you wish, you may have the lamp replaced at your nearest Sharp Authorized Projector Dealer or Service Center. * If the new lamp does not light after replacement, take your - Sharp XR-50S | XR-55S | XR-55X Operation Manual - Page 61
AC socket. • Leave the lamp until it has fully cooled down (about 1 hour). 3 Remove the lamp unit cover. • Close the lens shutter and turn the projector over. Loosen the user service screw (1) that secures the lamp unit cover. Remove the lamp unit cover (2). STANDBY/ON button AC socket User - Sharp XR-50S | XR-55S | XR-55X Operation Manual - Page 62
the tab on the lamp unit cover (1) and close it (2). Then tighten the user service screw (3) to secure the lamp unit cover. Info • If the lamp unit and will not turn on, even if the power cord is connected to the projector. Resetting the Lamp Timer Reset the lamp timer after replacing the lamp. - Sharp XR-50S | XR-55S | XR-55X Operation Manual - Page 63
Connecting Pin Assignments COMPUTER/COMPONENT input and COMPUTER/COMPONENT output Terminals: mini D-sub 15 pin female connector 11 15 COMPUTER Input/Output COMPUTER Input/Output Pin No. Signal Pin No. Signal 1. Video input (red) 1. PR (CR) 2. Video input (green/sync on green) 2. Y 3. - Sharp XR-50S | XR-55S | XR-55X Operation Manual - Page 64
RS CS CI Nottee • Depending on the controlling device used, it may be necessary to connect Pin 4 and Pin 6 on the controlling device (e.g. computer). Projector Pin No. 4 5 6 Computer Pin No. 4 5 6 USB Terminal: Type B USB connector 43 Pin No. Signal Name 1. VCC USB power 2. USB- USB data - Sharp XR-50S | XR-55S | XR-55X Operation Manual - Page 65
Command 4-digit Parameter 4-digit Response code format Normal response OK Return code (0DH) Problem response (communication error or incorrect command) ERR Return code (0DH) Info • When controlling the projector using RS-232C commands from a computer, wait for at least 30 seconds after the - Sharp XR-50S | XR-55S | XR-55X Operation Manual - Page 66
15, 30, 45 T L T L _ _ _ 1 0% - 100%(Integer) T N A M _ _ _ 1 XR55X/XR50S M N R D _ _ _ 1 XR-55X/XR-50S P J N 1 * * * * OK or ERR 0: Standby P J N 2 * * * * OK or ERR P J N 3 * * * * OK or ERR P J N 0 _ _ _ 1 Projector Name I R G B _ _ _ 1 OK or ERR I V E D _ _ _ 1 OK or ERR I V E D _ _ _ 2 OK - Sharp XR-50S | XR-55S | XR-55X Operation Manual - Page 67
Reset Signal Type Audio Input Picture Mode Contrast Bright Red Blue Color Tint Sharp CLR Temp BrilliantColor™ Film Mode DNR Picture Reset Audio Input Picture Mode Contrast Bright Red Blue Color Tint Sharp CLR Temp BrilliantColor™ Film Mode DNR Picture Reset Audio Input Standard Presentation Movie - Sharp XR-50S | XR-55S | XR-55X Operation Manual - Page 68
RS-232C Specifications and Commands (Continued) CONTROL CONTENTS C.M.S. Setting C.M.S. Clock Phase H-position V-position Fine Sync Adjustment Reset Image Shift Overscan OSD Display Video System Background Eco+Quiet Auto Sync Auto Power Off Auto Restart STANDBY Mode PRJ Mode On Off Hue Saturation - Sharp XR-50S | XR-55S | XR-55X Operation Manual - Page 69
Guide On Off Internal Speaker On Off RGB Frequency Check Horizontal Vertical Fan Mode Normal High Input Search *2 Start Video Setup 0 IRE 7.5 IRE Wall Color Off Blackboard Whiteboard Quick Start Menu On Off DLP® LinkTM (XR-55X *1 For setting the projector name, send the - Sharp XR-50S | XR-55S | XR-55X Operation Manual - Page 70
Computer Compatibility Chart Computer • Multiple signal support Horizontal Frequency: 15-110 kHz, Vertical 75 60 75 60 75 60 60 60 60 67 75 75 75 Display XR-55X XR-50S Upscale TRUE Upscale TRUE Intelligent Compression Intelligent Compression Upscale TRUE Intelligent Compression Upscale Intelligent - Sharp XR-50S | XR-55S | XR-55X Operation Manual - Page 71
Troubleshooting Problem Check Page • Projector power cord is not plugged into the wall outlet. 24 • external output. Refer to the computer's operation manual for how to switch its signal output settings. • Is "On" selected in "DLP® LinkTM"? (XR-55X only) 52 Sound is heard but no picture - Sharp XR-50S | XR-55S | XR-55X Operation Manual - Page 72
Troubleshooting (Continued) Problem Check Maintenance indicator on • See "Maintenance Indicators". the projector illuminates or blinks in red. indicator is illuminating in red. up even after the Replace the lamp. projector turns on. • The lens shutter is closed. The lamp suddenly turns off - Sharp XR-50S | XR-55S | XR-55X Operation Manual - Page 73
If you encounter any problems during setup or operation of this projector, first refer to the "Troubleshooting" section on pages 67 and 68. If this operation manual does not answer your question, please contact the SHARP Service departments listed below. U.S.A. Sharp Electronics Corporation 1-888 - Sharp XR-50S | XR-55S | XR-55X Operation Manual - Page 74
H × D] Weight (approx.) XR-55X XR-50S 0.55" DLP® Chip ×1 XGA (1024 × 768) SVGA (800 × 600) F 2.4 - 2.6 Manual, ×1.20 (f = 19.0 - 22.7 mm) Manual ×2 ×1 ×1 ×1 ×1 (L/R) . This SHARP projector uses a DLP® chip. This very sophisticated panel contains 786,432 (XR55X)/480,000 (XR-50S) pixels - Sharp XR-50S | XR-55S | XR-55X Operation Manual - Page 75
Dimensions Units: inches (mm) 13/32 (10) 3 1/8 (79) 5 27/64 (137.5) 2 61/64 (75) 11 52/64 (300) 1 31/32 (50) M4 M4 M4 M4 2 61/64 (75) 4 21/32 (118) 1 9/32 (32.5) 1 15/16 (49) 21/32 (16.5) 4 7/64 (104) 8 19/32 (218) 2 5/16 (58.5) 1 21/32 (41.7) 1 15/32 (37.3) 1 1/2 (38) 9 19/64 (236) - Sharp XR-50S | XR-55S | XR-55X Operation Manual - Page 76
RESIZE button 30 Resolution 44 RGB cable 21 RS-232C terminal 24 SCR-ADJ 46 Screen Size and Projection Distance 19 Security bar 13 Setup Guide 48 Sharp 42 SIG-ADJ 44 Signal Info 45 Signal Type 44 Speaker 49 SPOT button 32 STANDBY button 25 STANDBY Mode 52 STANDBY/ON button - Sharp XR-50S | XR-55S | XR-55X Operation Manual - Page 77
Appendix 73 - Sharp XR-50S | XR-55S | XR-55X Operation Manual - Page 78
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
 |
 |
Introduction
Easy Start
Setup
Connections
Basic
Operation
Useful
Features
Appendix
OPERATION MANUAL
MUTIMEDIA PROJECTOR
MODEL
XR-55X
XR-50S