Sharp XV-Z10000U XVZ10000U Operation Manual
Sharp XV-Z10000U - SharpVision - DLP Projector Manual
 |
UPC - 074000358836
View all Sharp XV-Z10000U manuals
Add to My Manuals
Save this manual to your list of manuals |
Sharp XV-Z10000U manual content summary:
- Sharp XV-Z10000U | XVZ10000U Operation Manual - Page 1
PROJECTOR PROJECTEUR PROYECTOR PROJETOR XV-Z10000 OPERATION MANUAL MODE D'EMPLOI MANUAL DE OPERACION MANUAL DE OPERAÇÃO XV-Z10000 SHARP CORPORATION XV-Z10000#Print#Hyo1,4.p65 1 Printed in Japan Imprimé au Japon Impreso en Japón Impresso no Japão TINS-A440WJZZ 02PXX-JWM 02.10.25, 7:21 PM - Sharp XV-Z10000U | XVZ10000U Operation Manual - Page 2
(servicing) instructions in the literature accompanying the product. WARNING: FCC Regulations state that any unauthorized changes or modifications to this equipment not expressly approved by the manufacturer could void the user's authority to operate this equip- ment. U.S.A. ONLY XV-Z10000 - Sharp XV-Z10000U | XVZ10000U Operation Manual - Page 3
and used in accordance with the operation manual, may cause harmful interference to radio Conformity SHARP PROJECTOR, MODEL XV-Z10000 This device complies with Part 15 of the FCC rules. Operation .eiae.org . Caution Concerning the Lamp Replacement See "Replacing the Lamp" on page 76. WARNING: Some - Sharp XV-Z10000U | XVZ10000U Operation Manual - Page 4
DLP™ projectors. • Superior image quality with Minolta™ optical lens system. • Use of 270 W high-output lamp resolution supports the building of home theaters using HTPC*. * Abbreviation for Home Theater Personal Computer that enables high-definition DVD playback using a personal computer. XV-Z10000 - Sharp XV-Z10000U | XVZ10000U Operation Manual - Page 5
Operation Manuals of SharpVision Manager 9 Part Names 10 Projector (Front and Top View 10 Projector (Rear View 11 Part Names 12 Remote Control (Front View 12 Remote Control (Top View 12 Using the Remote Control 13 Available Range of the Remote the Projector to Operation Operating the Theater - Sharp XV-Z10000U | XVZ10000U Operation Manual - Page 6
83 Specifications of wired remote control input 83 Function and transmisson codes 83 Sharp remote control signal format 83 Computer Compatibility Chart 84 Troubleshooting 85 For SHARP Assistance (U.S.A only 86 Specifications 87 Dimensions 88 Glossary 89 Index 90 XV-Z10000#Print#p04_05.p65 - Sharp XV-Z10000U | XVZ10000U Operation Manual - Page 7
the following basic rules for its installation, use and servicing. 1. Read Instructions All the safety and operating instructions should be read before the product is operated. 2. Retain Instructions The safety and operating instructions should be retained for future reference. 3. Heed Warnings All - Sharp XV-Z10000U | XVZ10000U Operation Manual - Page 8
operation. e. If the product has been dropped or damaged in any way. f. When the product exhibits a distinct change in performance. 19. Replacement Parts When replacement parts are required, be sure the service technician has used replacement . XV-Z10000#Print#p06_14.p65 7 -7 02.10.25, 7:25 PM - Sharp XV-Z10000U | XVZ10000U Operation Manual - Page 9
your nearest Authorized SharpVision Service Center or Dealer for replacement. See "Replacing the Lamp" on page 76. CAUTION PRECAUCIÓN PRÉCAUTION BQC-XVZ100001 Cautions concerning the setup of the projector I For minimal servicing and to maintain high image qual- ity, SHARP recommends that this - Sharp XV-Z10000U | XVZ10000U Operation Manual - Page 10
Operation Manuals of SharpVision Manager PDF operation manuals for the "SharpVision Manager" theater projector software provided are included in the CD-ROM in several languages. To utilize these manuals the instructions on the operation manual. XV-Z10000#Print#p06_14.p65 9 -9 02.10.25, 7:25 PM - Sharp XV-Z10000U | XVZ10000U Operation Manual - Page 11
blue, indicating normal function. Replace the lamp when the indicator illuminates red. 32 Power indicator Illuminates red, when the projector is in standby. When the power is turned on, this indicator will illuminate blue. 73 Intake vent 25 Adjustment foot 13 Remote control sensor 61 HIGH CONTRAST - Sharp XV-Z10000U | XVZ10000U Operation Manual - Page 12
connector Exhaust vent 73 73 Intake vent Remote control 13 sensor Using the Kensington Lock This projector has a Kensington Security Standard connector for use with a Kensington MicroSaver Security System. Refer to the information that came with the system for instructions on how to use it to - Sharp XV-Z10000U | XVZ10000U Operation Manual - Page 13
memory setting. Backlight button For lighting each button, press this button. Remote Control (Top View) Remote control signal transmitters 13 -12 XV-Z10000#Print#p06_14.p65 12 24 WIRED R/C JACK For controlling the projector by connecting the remote control to the projector. 02.10.25, 7:25 PM - Sharp XV-Z10000U | XVZ10000U Operation Manual - Page 14
with this projector may exhaust over a short period, depending on how they are kept. Be sure to replace them as soon as possible with new batteries when they have run out. • Remove the batteries from the remote control if you will not be using the remote control for a long time. XV-Z10000#Print - Sharp XV-Z10000U | XVZ10000U Operation Manual - Page 15
Supplied accessories Remote control RRMCGA128WJSA Two "AA" size batteries Power cord CACCDA010DE01 Lens cap (attached) PCAPH01056CESA CD-ROM (SharpVision Manager) UDSKAA019WJZZ Terminal cover CCOVA1985CE02 Operation manual (this manual) TINS-A440WJZZ SharpVision Manager operation manual TINS - Sharp XV-Z10000U | XVZ10000U Operation Manual - Page 16
Connections and Setup Connections and Setup XV-Z10000#Print#p15_16.p65 15 02.10.25, 7:25 PM - Sharp XV-Z10000U | XVZ10000U Operation Manual - Page 17
the connections are made. • Be sure to read the operation manuals of the devices to be connected before making connections. This projector can be connected to: Video equipment: I A VCR, rear of the projector. Supplied accessory Power cord -16 XV-Z10000#Print#p15_16.p65 16 02.10.25, 7:25 PM - Sharp XV-Z10000U | XVZ10000U Operation Manual - Page 18
Connecting the Projector to Other connected to INPUT 3 and INPUT 4 input terminals. Connect the projector to the video equipment using an S-video cable or a composite video S-video cable to connect the INPUT 3 terminal on the projector and the S-video output terminal on the video equipment. To - Sharp XV-Z10000U | XVZ10000U Operation Manual - Page 19
on the specifications of the DTV decoder connected to this projector. Please refer to the operation manual of the DTV decoder for details. -18 To analog RGB output terminal DVD player or DTV* decoder 5RCA RGB cable (Commercially available) XV-Z10000#Print#p17_20.p65 18 02.10.25, 7:26 PM - Sharp XV-Z10000U | XVZ10000U Operation Manual - Page 20
to describe the new digital television system in the United States. Connect the projector to the video equipment using a 3 RCA to 15-pin D-Sub cable using CB or CR. Connect each jack in the manner shown below at this time. Projector DVD player or DTV decoder Y PB PR Y CB CR 3 RCA to 15-pin - Sharp XV-Z10000U | XVZ10000U Operation Manual - Page 21
accessory *DTV is the umbrella term used to describe the new digital television system in the United States. DVI cable (sold separately) Connect the projector to the video equipment using the DVI cable. Note • Select the input signal type of the video equipment. See page 64. DVI cable Type - Sharp XV-Z10000U | XVZ10000U Operation Manual - Page 22
computer signals com- patible with the projector. Use with com- puter signals computers. Con- tact your nearest Authorized SharpVision Service Center or Dealer. • Depending on operation manual for switching the computer signal output settings. RGB Cable (commercially available) XV-Z10000 - Sharp XV-Z10000U | XVZ10000U Operation Manual - Page 23
using the "Plug and Play" function, be sure to turn on the projector first and the connected computer last. Note • The DDC "Plug and Play" function of this projector operates only when used in conjunction with a VESA DDC compatible computer. -22 XV-Z10000#Print#p21_22.p65 22 02.10.25, 7:27 PM - Sharp XV-Z10000U | XVZ10000U Operation Manual - Page 24
correctly set up. Refer to the operation manual of the computer for details. • See page 79 for connection of an RS232C cable. Optional RS-232C cable cable Type: AN-C10RS (32'10'' (10.0m)) RS-232C terminal Desktop computer RS-232C cable (sold separately) XV-Z10000#Print#p23_24.p65 23 02.10 - Sharp XV-Z10000U | XVZ10000U Operation Manual - Page 25
the WIRED R/C JACK on the top of the remote control to the WIRED REMOTE control input terminal. WIRED REMOTE control input terminal To WIRED R/C JACK ø3.5 mm minijack cable (commercially available or available as Sharp service part QCNW-4870CEZZ) -24 XV-Z10000#Print#p23_24.p65 24 02.10.25, 7:27 - Sharp XV-Z10000U | XVZ10000U Operation Manual - Page 26
correction. Info • Do not hold the lens when lifting or lowering the projector. • When lowering the projector, be careful not to get your finger caught in the area between the adjustment foot and the projector. Foot releases Adjustment feet XV-Z10000#Print#p25_30.p65 25 02.10.25, 7:28 PM -25 - Sharp XV-Z10000U | XVZ10000U Operation Manual - Page 27
Setup Adjusting the Lens The image is focused and adjusted to the desired size using the focus ring or zoom knob on the projector. 1 Zooming is adjusted by mov- ing the zoom knob. 2 The focus is adjusted by rotat- ing the focus ring. Focus ring Zoom knob Zoom in - Sharp XV-Z10000U | XVZ10000U Operation Manual - Page 28
within the shift range of the lens by rotating the lens shift dial on the top of the projector. Note • Do not forcibly turn the lens shift dial be- yond the range of the upper Lens shift dial Up Down HIGH CONTRAST/ HIGH BRIGHTNESS MODE button XV-Z10000#Print#p25_30.p65 27 02.10.25, 7:28 PM -27 - Sharp XV-Z10000U | XVZ10000U Operation Manual - Page 29
image is reversed or inverted, readjust the setting to "Front" for "PRJ Mode" in the "Options" menu. P.69 • Place the projector so that an imaginary horizontal line that passes through the center of the lens is perpendicular to the screen. -28 XV-Z10000#Print#p25_30.p65 28 02.10.25, 7:28 PM - Sharp XV-Z10000U | XVZ10000U Operation Manual - Page 30
an error of ± 3% in the formula above. • Values with a minus (-) sign indicate the distance of the lens center below the bottom of the screen. -29 XV-Z10000#Print#p25_30.p65 29 02.10.25, 8:41 PM - Sharp XV-Z10000U | XVZ10000U Operation Manual - Page 31
that you use the optional Sharp ceiling-mount bracket for this installation. I Before mounting the projector, contact your nearest Authorized SharpVision Service Center or Dealer to obtain setting. MOn-screen Display The image is inverted. -30 XV-Z10000#Print#p25_30.p65 30 02.10.25, 7:28 PM - Sharp XV-Z10000U | XVZ10000U Operation Manual - Page 32
Basic Operation Basic Operation XV-Z10000#Print#p31_39.p65 31 02.10.25, 7:28 PM - Sharp XV-Z10000U | XVZ10000U Operation Manual - Page 33
projector enters standby mode. 2 Press on the remote control or on the projector. • The power indicator illuminates blue. After the lamp replacement indicator illuminates, the projector is ready to start operation. Lamp replacement buttons -32 XV-Z10000#Print#p31_39.p65 32 02.10.25, 7:29 PM - Sharp XV-Z10000U | XVZ10000U Operation Manual - Page 34
display varies according to the "Signal Type" with INPUT 5. The explanation provided here uses the example of the case of having selected "Analog RGB". ➝ ➝ ➝ ➝ ➝ Basic Operation XV-Z10000#Print#p31_39.p65 33 02.10.25, 7:29 PM -33 - Sharp XV-Z10000U | XVZ10000U Operation Manual - Page 35
language of the projector can be set to English, German, Spanish, Dutch, French, Italian, Swedish, Portuguese, Chinese, Korean or Japanese. 1 Press . • The menu will be displayed. 2 Press \ or | to select "Lan- guage". Power (ON) button MENU button ', ", \, | buttons -34 XV-Z10000#Print#p31_39 - Sharp XV-Z10000U | XVZ10000U Operation Manual - Page 36
3 Press ' or " to select the de- sired language, and then press . 4 Press . • The desired language will be set as the on-screen display. Basic Operation XV-Z10000#Print#p31_39.p65 35 02.10.25, 7:29 PM -35 - Sharp XV-Z10000U | XVZ10000U Operation Manual - Page 37
. • Press to cancel Keystone Correction. • Straight lines or the edges of images may appear jagged while adjusting the image. Compresses lower side. Test pattern -36 XV-Z10000#Print#p31_39.p65 36 02.10.25, 7:29 PM - Sharp XV-Z10000U | XVZ10000U Operation Manual - Page 38
length of the image. Press to reset the image. UNDO button Pressing " decreases the vertical length of the image. Press to reset the image. Basic Operation XV-Z10000#Print#p31_39.p65 37 02.10.25, 7:29 PM -37 - Sharp XV-Z10000U | XVZ10000U Operation Manual - Page 39
RGB", "D. Video Comp." "A. RGB" and "A. Comp.". Note • The resolution, vertical frequency and horizontal frequency figures displayed above are for example purposes only. • Picture adjustment settings differ depending on the type of input signal. -38 XV-Z10000#Print#p31_39.p65 38 02.10.25, 7:29 PM - Sharp XV-Z10000U | XVZ10000U Operation Manual - Page 40
Operation I INPUT 3 / 4 Mode Main menu Picture Page 44 Gamma Page 48 C.M.S. Page 50 Sub menu Contrast -30 +30 Bright -30 +30 Color -30 +30 Tint -30 +30 Sharp Subtitle -30 +30 Reset DNR Lamp Timer OSD Display Video System Background XV-Z10000#Print#p31_39.p65 39 02.10.25, 7:29 PM -39 - Sharp XV-Z10000U | XVZ10000U Operation Manual - Page 41
that allow you to adjust the image and various projector settings. You can operate the menus from the projector or remote control using the following procedure. Menu screen for INPUT "Menu Screen MENU button MENU button ', ", \, | buttons -40 XV-Z10000#Print#p40_56.p65 40 02.10.25, 7:30 PM - Sharp XV-Z10000U | XVZ10000U Operation Manual - Page 42
. | • Press or to return to the previous screen. 4 Press \ or | to adjust the item selected. • The adjustment is stored. 5 Press . • The menu screen will disappear. XV-Z10000#Print#p40_56.p65 41 02.10.25, 7:30 PM -41 Basic - Sharp XV-Z10000U | XVZ10000U Operation Manual - Page 43
previous screen. • In some menus, select the icon us- ing " ". ", ', \, | buttons ENTER button ENTER button M Menu screen MENU button MENU button ', ", \, | buttons Sub menu -42 XV-Z10000#Print#p40_56.p65 42 02.10.25, 7:30 PM - Sharp XV-Z10000U | XVZ10000U Operation Manual - Page 44
" or "OK" and then press . • Use to select "ON" or "OFF" for the item of "Eonomy Mode". 7 Press . • The menu will disappear. Sub menu Basic Operation XV-Z10000#Print#p40_56.p65 43 02.10.25, 7:30 PM -43 - Sharp XV-Z10000U | XVZ10000U Operation Manual - Page 45
on the menu screen. ➝For operating the menu screen, see pages 40 to 43. Selected Item Description \ button | button Contrast Bright Color Tint Sharp CLR Temp For adjusting the contrast all adjustment items, select "Reset" and press . -44 XV-Z10000#Print#p40_56.p65 44 02.10.25, 7:30 PM - Sharp XV-Z10000U | XVZ10000U Operation Manual - Page 46
This function allows you to select the desired color reproduction mode. Select "Color Selected" in the "Picture" menu on the menu screen. ➝For operating the menu screen, see pages 40 to 43. ➝For setting the color reproduction mode, see page 50. XV-Z10000#Print#p40_56.p65 45 02.10.25, 7:30 PM -45 - Sharp XV-Z10000U | XVZ10000U Operation Manual - Page 47
Mode" in the "Picture" menu on the menu screen. ➝For operating the menu screen, see pages 40 to 43. Note • 2D with the original encoded as is at 24 frames/second. The projector can convert this film source to progressive video at 60 frames/second XV-Z10000#Print#p40_56.p65 46 02.10.25, 7:30 PM - Sharp XV-Z10000U | XVZ10000U Operation Manual - Page 48
" menu. Select "Picture Setting" in the "Picture" menu on the menu screen. ➝For operating the menu screen, see pages 40 to 43. Selected item Description Memory 1 to Memory 5 adjustment values are to be changed. XV-Z10000#Print#p40_56.p65 47 PICTURE SETTING button 02.10.25, 7:30 PM -47 Basic - Sharp XV-Z10000U | XVZ10000U Operation Manual - Page 49
curve for each of RGB. Allows you to adjust gamma value using SharpVision Manager Software. Note • The gamma position you make the setting to the SharpVison Manager operation manual (supplied). Standard Black Detail Brighten SVM Gamma Custom 2 Custom 1 -48 XV-Z10000#Print#p40_56.p65 48 - Sharp XV-Z10000U | XVZ10000U Operation Manual - Page 50
suit your preferences. Select the gamma item in the "Gamma" menu on the menu screen. ➝For operating the menu screen, see pages 40 to 43. Note • These gamma values can be adjusted only when For more brightness in blue color Basic Operation XV-Z10000#Print#p40_56.p65 49 02.10.25, 7:30 PM -49 - Sharp XV-Z10000U | XVZ10000U Operation Manual - Page 51
menu screen. ➝For operating the menu screen, see pages 40 to 43. Selected item Standard Custom 1-3 Description Sharp default setting "Lightness", on the menu screen. ➝For operating the menu screen, see pages 40 to 43. Red Yellow Green Cyan Blue Magenta -50 XV-Z10000#Print#p40_56.p65 50 02. - Sharp XV-Z10000U | XVZ10000U Operation Manual - Page 52
" in the "C.M.S." menu on the menu screen. ➝For operating the menu screen, see pages 40 to 43. Setting the Hue of the Target Color Select "Hue" in the "C.M.S." menu on the menu screen. ➝For operating the menu screen, see pages 40 to 43. XV-Z10000#Print#p40_56.p65 51 02.10.25, 7:30 PM - Sharp XV-Z10000U | XVZ10000U Operation Manual - Page 53
or "Reset (All Colors)" in the "C.M.S." menu on the menu screen. ➝For operating the menu screen, see pages 40 to 43. Selected item Reset (This Color) Reset "C.M.S." menu on the menu screen. ➝For operating the menu screen, see pages 40 to 43. -52 XV-Z10000#Print#p40_56.p65 52 02.10.25, 7:30 PM - Sharp XV-Z10000U | XVZ10000U Operation Manual - Page 54
for details. Saving Adjustment Settings This projector allows you to store up to seven adjustment settings for use with various computers. Select "Save Setting" in the "Fine Sync" menu on the menu screen. ➝For operating the menu screen, see pages 40 to 43. XV-Z10000#Print#p40_56.p65 53 02.10.25 - Sharp XV-Z10000U | XVZ10000U Operation Manual - Page 55
projector can be easily accessed. Select "Select Setting" in the "Fine Sync" menu on the menu screen. ➝For operating the menu screen, see pages 40 to 43. Note • If a memory position has not been set, a resolution currently selected input signal. -54 XV-Z10000#Print#p40_56.p65 54 02.10.25, 7:30 PM - Sharp XV-Z10000U | XVZ10000U Operation Manual - Page 56
on the menu screen. ➝For operating the menu screen, see pages 40 to 43. Note When setting to " Normal" or " High Speed": • Auto Sync adjustment will occur when the projector is turned on or when the inputs are switched, when connected to a computer. Manual adjustments should be performed: • When - Sharp XV-Z10000U | XVZ10000U Operation Manual - Page 57
Function Used to set the screen displayed during Auto Sync. Select "Auto Sync Disp" in the "Fine Sync" menu on the menu screen. ➝For operating the menu screen, see pages 40 to 43. Selected item Description The image set as a background image is projected. The computer image being adjusted is - Sharp XV-Z10000U | XVZ10000U Operation Manual - Page 58
Easy to Use Functions Easy to Use Functions XV-Z10000#Print#p57_61.p65 57 02.10.25, 7:31 PM - Sharp XV-Z10000U | XVZ10000U Operation Manual - Page 59
is pressed, the display changes as shown on pages 59 and 60. Info • In the Dot by Dot Mode, images are displayed in the original resolution, therefore they will not be enlarged. • To return to the standard image, press while "RESIZE" is displayed on the screen. RESIZE button Screen display of - Sharp XV-Z10000U | XVZ10000U Operation Manual - Page 60
4:3 aspect ratio * 480I 480P 576I 576P NTSC PAL SECAM Letter box image With squeeze 540P 1080I For 16:9 aspect ratio 720P * * * * * Easy to Use Functions XV-Z10000#Print#p57_61.p65 59 02.10.25, 7:31 PM -59 - Sharp XV-Z10000U | XVZ10000U Operation Manual - Page 61
ן600) XGA For 4:3 aspect ratio (1024 ן768) SXGA For 5:4 aspect ratio (1280 ן1024) DOT BY DOT 800 ן600 1024 ן720 1280 ן720 1280 ן720 -60 XV-Z10000#Print#p57_61.p65 60 02.10.25, 7:31 PM - Sharp XV-Z10000U | XVZ10000U Operation Manual - Page 62
can be operated using the HIGH CONTRAST/HIGH BRIGHTNESS MODE button on the projector. Set "NORMAL" when the projector is used in a relatively bright room. Operating the Theater Mode Function HIGH BRIGHTNESS MODE button Easy to Use Functions XV-Z10000#Print#p57_61.p65 61 02.10.25, 7:31 PM -61 - Sharp XV-Z10000U | XVZ10000U Operation Manual - Page 63
Vertical Size of the Display Select "Subtitle" in the "Options" menu on the menu screen. ➝For operating the menu screen, see pages 40 to 43. Note • When changing the screen with the Subtitle setting, screen. For details, see pages 59 and 60. -62 XV-Z10000#Print#p62_65.p65 62 02.10.25, 7:32 PM - Sharp XV-Z10000U | XVZ10000U Operation Manual - Page 64
On-screen Display Select "OSD Display" in the "Options" menu on the menu screen. ➝For operating the menu screen, see pages 40 to 43. Selected Item Normal Level A Level B Description All displays (Power off/Temp./Change The Lamp., etc.)) -63 XV-Z10000#Print#p62_65.p65 63 02.10.25, 7:32 PM - Sharp XV-Z10000U | XVZ10000U Operation Manual - Page 65
Component for INPUT 5. Select "Signal Type" in the "Options" menu on the menu screen. ➝For operating the menu screen, see pages 40 to 43. Note For INPUT 1 and INPUT 2 RGB Set when signals are received. For INPUT 1 and INPUT 2 For INPUT 5 -64 XV-Z10000#Print#p62_65.p65 64 02.10.25, 7:32 PM - Sharp XV-Z10000U | XVZ10000U Operation Manual - Page 66
signal. Setting the Video System Select "Video System" in the "Options" menu on the menu screen. ➝For operating the menu screen, see pages 40 to 43. Note • The video signal can only be set in IN- NTSC video equipment. Easy to Use Functions XV-Z10000#Print#p62_65.p65 65 02.10.25, 7:32 PM -65 - Sharp XV-Z10000U | XVZ10000U Operation Manual - Page 67
"Options" menu on the menu screen. ➝For operating the menu screen, see pages 40 to 43. Selected Item Blue None Blue screen Black screen * Description * If the input signal has interference, the screen will be displayed with the interference. -66 XV-Z10000#Print#p66_68.p65 66 02.10.25, 7:32 - Sharp XV-Z10000U | XVZ10000U Operation Manual - Page 68
). RS-232C connection is set to "OFF". RS-232C does not operate when the power supply is in standby. Note • Set "RS-232 Port" to "ON" when using the SharpVision Manager Software. • "RS-232S Port" is switched on and off by pressing . XV-Z10000#Print#p66_68.p65 67 Status ON (Low power mode) OFF - Sharp XV-Z10000U | XVZ10000U Operation Manual - Page 69
on the menu screen. ➝For operating the menu screen, see pages 40 to 43. Note • Make sure that both the projector and computer are set for the same baud rate. Refer to the computer's operation manual for instructions for setting the computer's baud rate. -68 XV-Z10000#Print#p66_68.p65 68 02.10 - Sharp XV-Z10000U | XVZ10000U Operation Manual - Page 70
projector is equipped with a reverse/invert image function that allows you to reverse or invert the projected image for various applications. Setting the Projection Mode Select "PRJ Mode" in the "Options" menu on the menu screen. ➝For operating XV-Z10000#Print#p69_70.p65 69 02.10.25, 7:33 PM -69 - Sharp XV-Z10000U | XVZ10000U Operation Manual - Page 71
all the adjusted settings as a list on the screen. Overview of All Menu Settings Select the "Status" menu on the menu screen and press . ➝For operating the menu screen, see pages 40 to 43. -70 XV-Z10000#Print#p69_70.p65 70 02.10.25, 7:33 PM - Sharp XV-Z10000U | XVZ10000U Operation Manual - Page 72
Appendix Appendix XV-Z10000#Print#p71_84.p65 71 02.10.25, 7:34 PM - Sharp XV-Z10000U | XVZ10000U Operation Manual - Page 73
diluted with water, wring the cloth well and then wipe the projector. Strong cleaning detergents may discolor, warp or damage the coating on the projector. Make sure to test on a small, inconspicuous area on the projector before using. -72 XV-Z10000#Print#p71_84.p65 72 02.10.25, 7:34 PM - Sharp XV-Z10000U | XVZ10000U Operation Manual - Page 74
is equipped with ventilative holes to ensure the optimal operating condition of the projector. • Periodically clean the ventilative hole by vacuuming it off with a the cleaner hose on the intake ventilative holes. Cleaner hose Cleaner hose XV-Z10000#Print#p71_84.p65 73 02.10.25, 7:34 PM -73 - Sharp XV-Z10000U | XVZ10000U Operation Manual - Page 75
to the procedure on page 73. • Burnt-out lamp • Lamp circuit failure • Carefully replace the lamp. (See page 77) • Take the projector to your nearest Authorized SharpVision Service Center or Dealer for repair. • Please exercise care when replacing the lamp. Power Blue on/ indicator Red on Red - Sharp XV-Z10000U | XVZ10000U Operation Manual - Page 76
lamp replacement indicator may be triggered, preventing the power from going on. Should this occur, take the power cord out of the wall outlet and plug it back in again. • If you want to clean the air vents during projector operation . Appendix XV-Z10000#Print#p71_84.p65 75 02.10.25, 7:34 PM -75 - Sharp XV-Z10000U | XVZ10000U Operation Manual - Page 77
from your nearest Authorized SharpVision Service Center or Dealer. Then carefully change the lamp by following the instructions described in this section. If you wish, you may have the lamp replaced at your nearest Authorized SharpVision Service Center or Dealer. -76 XV-Z10000#Print#p71_84.p65 76 - Sharp XV-Z10000U | XVZ10000U Operation Manual - Page 78
it has fully cooled down (about 1 hour). Lamp unit BQC-XVZ100001 Appendix 3 Remove the lamp unit cover. • Loosen the user service screw that secures the lamp unit cover. Then open the cover in the direction of the arrow. XV-Z10000#Print#p71_84.p65 77 User service screws -77 02.10.25, 7:34 PM - Sharp XV-Z10000U | XVZ10000U Operation Manual - Page 79
, indicating that the lamp timer is reset. Info • Make sure to reset the lamp timer only when replacing the lamp. If you reset the lamp timer and continue to use the same lamp, this may cause the lamp to become damaged or explode. -78 XV-Z10000#Print#p71_84.p65 78 2 1 User service screws 02.10 - Sharp XV-Z10000U | XVZ10000U Operation Manual - Page 80
internal circuit Connected to internal circuit Connected to internal circuit Connected to internal circuit Connected to internal circuit Connected to internal circuit Not connected Appendix XV-Z10000#Print#p71_84.p65 79 02.10.25, 7:34 PM -79 - Sharp XV-Z10000U | XVZ10000U Operation Manual - Page 81
Command 4-digit Response code format Normal response Parameter 4-digit Problem response (communication error or incorrect command) O K computer control function of the projector, the projector's operating status cannot be read ← Projector OK -80 XV-Z10000#Print#p71_84.p65 80 02.10.25, 7:34 - Sharp XV-Z10000U | XVZ10000U Operation Manual - Page 82
and Command Settings BUTTONS & REMOTE CONTROL KEY CONTROL CONTENTS COMMAND ) R C C O _ * * * OK OR ERR PICTURE XV-Z10000#Print#p71_84.p65 81 GAMMA PICTURE CONTROL CONTENTS COMMAND PARAMETER RETURN INPUT +30) R C T I _ * * * OK OR ERR INPUT 5 SHARP (-30 - +30) R C S H _ * * * OK OR - Sharp XV-Z10000U | XVZ10000U Operation Manual - Page 83
POWER OFF : NO USE A P O W _ _ _ 0 OK OR ERR AUTO POWER OFF : USE A P O W _ _ _ 1 OK OR ERR LAMP USAGE TIME T L T T _ _ _ 1 0-9999 (INTEGER) PROJECTION MODE : FRONT I M P J _ _ _ 0 OK OR ERR PROJECTION MODE : the displayed RGB mode. -82 XV-Z10000#Print#p71_84.p65 82 02.10.25, 7:35 PM - Sharp XV-Z10000U | XVZ10000U Operation Manual - Page 84
bits, with "10" indicating "Front" and "01" indicating "Rear". Sharp remote control signal format Transmission format: 15-bit format D D D D D 1 0 1 1 0 0 1 1 1 1 1 1 1 0 1 D to D Common Data Bit Reverse in D -83 XV-Z10000#Print#p71_84.p65 83 02.10.25, 7:35 PM Appendix - Sharp XV-Z10000U | XVZ10000U Operation Manual - Page 85
100 DVI Suport Display Upscale True PC/ MAC/ WS Resolution Horizontal Frequency (kHz) Vertical Frequency (Hz) VESA Standard 54 in your notebook computer's operation manual. • When this projector receives 640 × 350 VESA Support ✔ -84 XV-Z10000#Print#p71_84.p65 84 02.10.25, 7:35 PM - Sharp XV-Z10000U | XVZ10000U Operation Manual - Page 86
Troubleshooting Problem No picture and no sound or projector does not start. Check • Projector power cord is not plugged into the wall outlet. • Power to the external connected devices is off. • The selected input mode is wrong. • Cables incorrectly connected to rear panel of the projector. • - Sharp XV-Z10000U | XVZ10000U Operation Manual - Page 87
to 30 seconds or more. Page 64 74 44 80 For SHARP Assistance (U.S.A only) If you encounter any problems during setup or operation of this projector, first refer to the "Troubleshooting" section on this page. If this operation manual does not answer your question, please call toll free 1-877-DTV - Sharp XV-Z10000U | XVZ10000U Operation Manual - Page 88
(11'10", 3.6 m), Terminal cover, Lens cap (attached), SharpVision Manager Software CD-ROM, Projector operation manual, SharpVision Manager operation manual Replacement parts Lamp unit (Lamp/cage module) (BQC-XVZ100001), Remote control (RRMCGA128WJSA), AA size batteries , Power cord (CACCDA010DE01 - Sharp XV-Z10000U | XVZ10000U Operation Manual - Page 89
Dimensions Units: inches (mm) Side View Rear View Top View Side View 15 49/50 (406) 7 (178) Front View Bottom View 18 11/16 (475) -88 XV-Z10000#Print#p85_92.p65 88 02.10.25, 7:35 PM - Sharp XV-Z10000U | XVZ10000U Operation Manual - Page 90
Advanced intelligent compression High quality resizing of lower and higher resolution images to fit the projector's native resolution. Aspect Ratio Width and height ratio of an image. to display it fully on a 16:9 screen. Appendix XV-Z10000#Print#p85_92.p65 89 02.10.25, 7:35 PM -89 - Sharp XV-Z10000U | XVZ10000U Operation Manual - Page 91
Lamp Life 76 Lamp replacement indicator 32 Lens cap 10 Lightness 51 MENU button 32 NORMAL 58 Optional accessories 14 OSD Display 63 PDF 9 Phase 53 Power buttons 32 Power cord 16 Power indicator 32 PRJ mode 69 Progressive Mode 46 Remote control 12 Remote control sensor 13 Replacing - Sharp XV-Z10000U | XVZ10000U Operation Manual - Page 92
Coverage (if any): Where to Obtain Service: What to do to Obtain Service: XV-Z10000 Projector (Be sure to have this information available when you need service for your Product.) One (1) year parts and labor from date of purchase except for the Projector Lamp for which the warranty period is ninety - Sharp XV-Z10000U | XVZ10000U Operation Manual - Page 93
(bulb 90 days) To obtain the name and address of the nearest Authorized Sharp Service Centre or Dealer, please contact: SHARP ELECTRONICS OF CANADA LTD. SHARP ELECTRONICS OF CANADA LTD 335 Britannia Road East Mississauga, Ontario L4Z 1W9 (905) 568-7140 Web site: www.sharp.ca -92 XV-Z10000#Print
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
-
79
-
80
-
81
-
82
-
83
-
84
-
85
-
86
-
87
-
88
-
89
-
90
-
91
-
92
-
93
 |
 |
SHARP CORPORATION
Printed in Japan
Imprimé au Japon
Impreso en Japón
Impresso no Japão
TINS-A440WJZZ
02PXX-JWM
XV-Z10000
OPERATION MANUAL
MODE D’EMPLOI
MANUAL DE OPERACION
MANUAL DE OPERAÇÃO
XV
-
Z10000
PROJECTOR
PROJECTEUR
PROYECTOR
PROJETOR
ENGLISH
.............
-1 –
-XX
FRANÇAIS
...........
-1 –
-XX
ESPAÑOL
............
-1 –
-XX
PORTUGUÊS
......
-1 –
-XX
XV-Z10000#Print#Hyo1,4.p65
02.10.25, 7:21 PM
1