Sharp XV-Z12000 XVZ12000 Operation Manual
Sharp XV-Z12000 - SharpVision - DLP Projector Manual
 |
View all Sharp XV-Z12000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Sharp XV-Z12000 manual content summary:
- Sharp XV-Z12000 | XVZ12000 Operation Manual - Page 1
PROJECTOR PROJECTEUR PROYECTOR PROJETOR XV-Z12000 OPERATION MANUAL MODE D'EMPLOI MANUAL DE OPERACION MANUAL DE OPERAÇÃO XV-Z12000 SHARP CORPORATION Printed on 100% post-consumer recycled paper. Imprimé sur 100% de papier recyclé. Impreso en 100% de papel reciclado de postconsumo. Papel 100% - Sharp XV-Z12000 | XVZ12000 Operation Manual - Page 2
XV-Z12000 Serial No.: There are two important reasons for prompt warranty registration of your new SHARP Projector, using the REGISTRATION CARD packed with the projector. 1. WARRANTY This is to assure that you immediately receive the full benefit of the parts, service (servicing) instructions in - Sharp XV-Z12000 | XVZ12000 Operation Manual - Page 3
mode always use the STANDBY button on the projector or on the remote control. Ensure the cooling fan has stopped before disconnecting the power cord. DURING NORMAL OPERATION, NEVER TURN THE PROJECTOR OFF BY DISCONNECTING THE POWER CORD. FAILURE TO OBSERVE THIS WILL RESULT IN PREMATURE LAMP FAILURE - Sharp XV-Z12000 | XVZ12000 Operation Manual - Page 4
Manuals of SharpVision Manager 8 Quick Guide 9 Part Names 10 Projector (Front and Top View 10 Projector (Rear View 11 Remote Control (Front View 12 Remote Control (Top View 12 Using the Remote Control 13 Available Range of the Remote Control Target Color 55 Resetting User-Defined Color - Sharp XV-Z12000 | XVZ12000 Operation Manual - Page 5
the Lamp 80 Replacing the Lamp 80 Removing and Installing the Lamp Unit 81 Resetting the Lamp Timer 82 Connecting Pin Assignments 83 (RS-232C) Specifications and Command Settings 84 Wired Remote Control Terminal Specifications 87 Computer Compatibility Chart 88 Troubleshooting 89 For SHARP - Sharp XV-Z12000 | XVZ12000 Operation Manual - Page 6
, tripod, bracket, or table recommended by the manufacturer, or sold with the product. Any mounting of the product should follow the manufacturer's instructions, and should use a mounting accessory recommended by the manufacturer. 9. Transportation A product and cart combination should be moved with - Sharp XV-Z12000 | XVZ12000 Operation Manual - Page 7
operating instructions. Adjust only those controls that are covered by the operating instructions, as an improper adjustment of other controls may in performance. 19. Replacement Parts When replacement parts are required, be sure the service technician has used replacement parts specified by the - Sharp XV-Z12000 | XVZ12000 Operation Manual - Page 8
your nearest Authorized SharpVision Service Center or Dealer for replacement. See "Replacing the Lamp" on pages 80-82. CAUTION PRECAUCIÓN PRÉCAUTION BQC-XVZ100005 Cautions concerning the setup of the projector I For minimal servicing and to maintain high image qual- ity, SHARP recommends that this - Sharp XV-Z12000 | XVZ12000 Operation Manual - Page 9
Manuals of SharpVision Manager PDF operation manuals in several languages for the "SharpVision Manager" theater projector software provided are included in the CD-ROM. To utilize these manuals, you need Adobe Acrobat Reader installed on your PC (Windows and follow the instructions on the screen. - Sharp XV-Z12000 | XVZ12000 Operation Manual - Page 10
13) Power cord Video equipment Composite video cable (commercially available) 1. Place the projector facing a wall or a screen. 2. Connect to video equipment. (Page 17) 6. Turn the projector on using on the remote control. (Page 34) ON button INPUT 4 button The power indicator illuminates blue - Sharp XV-Z12000 | XVZ12000 Operation Manual - Page 11
operation manual where the topic is explained. Projector ( Replace the lamp when the indicator illuminates red. 34 Power indicator Illuminates red, when the projector is in standby. When the power is turned on, this indicator will illuminate blue. Intake vent 27 Adjustment foot 13 Remote control - Sharp XV-Z12000 | XVZ12000 Operation Manual - Page 12
25 RS-232C terminal For controlling projector using a computer. DC 12V OUTPUT terminal 26 WIRED REMOTE control input terminal 17 INPUT 4 instructions on how to use it to secure the projector. Using the Terminal Cover When the projector is used on a desktop, high mounted or ceiling mounted, - Sharp XV-Z12000 | XVZ12000 Operation Manual - Page 13
signal type. Remote Control (Top View) Remote control signal transmitters 13 -12 XV_Z12000_E_US_p05_14.p65 12 34 ON button For turning the power all buttons on the remote control. 26 WIRED R/C JACK For controlling the projector by connecting the remote control to the projector. 03.9.26, 6:35 - Sharp XV-Z12000 | XVZ12000 Operation Manual - Page 14
30˚ 45˚ 30˚ When using the remote control: • Be sure not to drop, expose to moisture or high temperature. • The remote control may malfunction under a fluorescent lamp. Under that circumstance, move the projector away from the fluorescent lamp. 45˚ 30˚ Remote control Inserting the Batteries The - Sharp XV-Z12000 | XVZ12000 Operation Manual - Page 15
Supplied accessories Remote control RRMCGA216WJSA Two "AA" size batteries Power cord CACCDA024DE01 Lens cap (attached) PCAPH1056CESA CD-ROM (SharpVision Manager) UDSKAA040WJZZ Terminal cover CCOVA1985CE03 Operation manual (this manual) TINS-A970WJZZ SharpVision Manager operation manual TINS - Sharp XV-Z12000 | XVZ12000 Operation Manual - Page 16
Connections and Setup Connections and Setup XV_Z12000_E_US_p15_26.p65 15 03.9.26, 6:36 PM - Sharp XV-Z12000 | XVZ12000 Operation Manual - Page 17
When connecting a computer, be sure that it is the last device to be turned on after all the connections are made. • Be sure to read the operation manuals of the devices to be connected before making connections. This projector can be connected to: Video equipment: I A VCR, DVD player or other video - Sharp XV-Z12000 | XVZ12000 Operation Manual - Page 18
into color and luminance signals to realize a higher-quality image. To view a higher-quality image, use a commercially available S-video cable to connect the INPUT 3 terminal on the projector and the S-video output terminal on the video equipment. VCR or other video equipment XV_Z12000_E_US_p15_26 - Sharp XV-Z12000 | XVZ12000 Operation Manual - Page 19
term used to describe the new digital television system in the United States. 1 Connect a component cable to the projector. 2 projector to the video equipment in this way, select "Component" for "Signal Type" in the "Options" menu, or select the Component mode by pressing on the remote control - Sharp XV-Z12000 | XVZ12000 Operation Manual - Page 20
" menu, or select the RGB mode by pressing on the remote control. See page 69. • The (HD/C sync) and (VD) terminals may be used depending on the specifications of the DTV decoder connected to this projector. Please refer to the operation manual of the DTV decoder for details. Connecting to RGB Video - Sharp XV-Z12000 | XVZ12000 Operation Manual - Page 21
DVD players and DTV* decoders to the INPUT 5 terminal. * DTV is the umbrella term used to describe the new digital television system in the United States. 1 Connect a DVI to 15-pin D-sub adaptor to the projector. 2 Connect a 3 RCA to 15-pin D- sub cable to the above adaptor. • Secure the connectors - Sharp XV-Z12000 | XVZ12000 Operation Manual - Page 22
Connecting to Video Equipment with the HDMI Output Terminal Using a DVI to HDMI Cable (INPUT 5) Use a DVI to HDMI cable when connecting HDMI video equipment such as DVD players to INPUT 5 terminal. 1 Connect a DVI to HDMI cable to the projector. • Secure the connectors by tightening the thumbscrews. - Sharp XV-Z12000 | XVZ12000 Operation Manual - Page 23
the projector to a computer in this way, select "A. RGB" for "Signal Type" in the "Options" menu, or select the "A. RGB" by pressing on the remote control. See page 69. • A Macintosh adaptor may be required for use with some Macintosh computers. Contact your nearest Authorized SharpVision Service - Sharp XV-Z12000 | XVZ12000 Operation Manual - Page 24
Connections and Setup Connecting to a Computer Using a DVI Cable (INPUT 5) 1 Connect a DVI cable to the sure to unplug the power cord of the projector from the AC outlet and turn off the computer to be connected. After making all connections, turn on the projector and then the computer. • Be sure - Sharp XV-Z12000 | XVZ12000 Operation Manual - Page 25
, allowing for quick and easy setup. I Before using the "Plug and Play" function, be sure to turn on the projector first and the connected computer last. Note • The DDC "Plug and Play" function of this projector operates only when used in conjunction with a VESA DDC compatible computer. -24 - Sharp XV-Z12000 | XVZ12000 Operation Manual - Page 26
can be used to control the projector and check the status of the projector. See page 84 for details. 1 Connect an RS-232C cable to the projector. 2 Connect your computer terminal is not correctly set up. Refer to the operation manual of the computer for details. To RS-232C terminal RS-232C cable - Sharp XV-Z12000 | XVZ12000 Operation Manual - Page 27
Other Devices Using as a Wired Remote Control Connecting the Remote Control to the Projector When the remote control cannot be used due to the range or positioning of the projector (rear projection, etc.), connect a ø3.5 mm minijack cable (commercially available or available as Sharp service part - Sharp XV-Z12000 | XVZ12000 Operation Manual - Page 28
from the foot releases. Once the adjustment feet have locked in position, release the projector. • If the screen is at an angle, the adjustment feet can be used to adjust the angle of the image. Note • The projector is adjustable up to approxi- mately 5 degrees from the standard position. • When the - Sharp XV-Z12000 | XVZ12000 Operation Manual - Page 29
Setup Adjusting the Lens The image is focused and adjusted to the desired size using the focus ring or zoom knob on the projector. 1 The focus is adjusted by rotat- ing the focus ring. Focus ring Zoom knob 2 Zooming is adjusted by mov- ing the zoom knob. Focus ring - Sharp XV-Z12000 | XVZ12000 Operation Manual - Page 30
Using the Lens Shift The height of the projected image can be adjusted within the shift range of the lens by rotating the lens shift dial on the top of the projector. Note • Do not turn the lens shift dial beyond the upper limit and lower limit positions. This may cause the projector to malfunction - Sharp XV-Z12000 | XVZ12000 Operation Manual - Page 31
and dim the lights when setting up the screen in a sunny or bright room. • A polarizing screen cannot be used with this projector. Standard Setup (Front Projection) I Place the projector at the required distance from the screen according to the desired picture size. (See page 31.) Screen size : 100 - Sharp XV-Z12000 | XVZ12000 Operation Manual - Page 32
Size and Projection Distance x yz Connections and Setup When using a normal screen (4:3) In case of setting the 16:9 (-) sign indicate the distance of the lens center below the bottom of the screen. When using a wide screen (16:9) In case of displaying the 16:9 picture on the whole of the 16 - Sharp XV-Z12000 | XVZ12000 Operation Manual - Page 33
does not shine into the eyes of the audience. Ceiling-mount setup I It is recommended that you use the optional Sharp ceiling-mount bracket for this installation. I Before mounting the projector, contact your nearest Authorized SharpVision Service Center or Dealer to obtain the recommended ceiling - Sharp XV-Z12000 | XVZ12000 Operation Manual - Page 34
Basic Operation Basic Operation XV_Z12000_E_US_p33_41.p65 33 03.9.24, 1:59 PM - Sharp XV-Z12000 | XVZ12000 Operation Manual - Page 35
status of the lamp. Blue: The lamp is ready. Blue blinking: The lamp is warming up. Red: The lamp should be replaced. •If the projector is put into the standby mode and immediately turned on again, the lamp indicator may take some time to illuminate. • When controlling the projector using RS-232C - Sharp XV-Z12000 | XVZ12000 Operation Manual - Page 36
3 Press , , , or on the remote control or on the projector to select the INPUT mode. • After pressing once on the projector, use to select the desired input mode. Note • When no signal is received, "NO SIGNAL" will be displayed. When a signal that the projector is not preset to receive is received - Sharp XV-Z12000 | XVZ12000 Operation Manual - Page 37
Image Projection Selecting the On-screen Display Language • The on-screen display language of the projector can be set to English, German, Spanish, Dutch, French, Italian, Swedish, Portuguese, Chinese, Korean or Japanese. 1 Press . • The menu will be displayed. 2 Press \ or | to - Sharp XV-Z12000 | XVZ12000 Operation Manual - Page 38
Turning the Power off 1 Press on the remote control or on the projector, then press or again while the confirmation message is displayed, to put the projector into the standby mode. STANDBY button ENTER button Note • If you accidentally pressed and do not want to put the projector into the standby - Sharp XV-Z12000 | XVZ12000 Operation Manual - Page 39
Keystone Correction and Vertical Size Adjustment Correcting Trapezoidal Distortion and Adjusting the Vertical Size of the Picture This function allows for Keystone (On-screen Trapezoidal Distortion) Correction and the adjustment of the vertical size of the picture. KEYSTONE button ENTER button - Sharp XV-Z12000 | XVZ12000 Operation Manual - Page 40
. In this case, adjust the aspect ratio using the vertical size adjustment. Pressing ' increases the vertical length of the image. Press to reset the image. UNDO button Pressing " decreases the vertical length of the image. Press to reset the image. Basic Operation XV_Z12000_E_US_p33_41.p65 39 - Sharp XV-Z12000 | XVZ12000 Operation Manual - Page 41
projector. I INPUT 1 / 2 / 5 Mode Main menu Picture Page 46 Sub menu Picture Position Contrast -30 +30 Bright -30 +30 Color -30 +30 Tint -30 +30 Sharp -30 +30 CLR Temp 5000 11000 Gamma Position C.M.S. Position Specials Reset Subtitle -30 +30 Reset LED [ON/OFF] Lamp Timer OSD Display * - Sharp XV-Z12000 | XVZ12000 Operation Manual - Page 42
+30 Tint -30 +30 Sharp -30 +30 CLR Temp 5000 11000 Gamma Position C.M.S. Position Specials Reset Standard Natural Dynamic Custom 1 Page 36 Sub menu Digi. Shift -30 +30 Subtitle -30 +30 Reset LED [ON/OFF] Lamp Timer OSD Display Video System Background Economy Mode RS-232C PRJ Mode Normal - Sharp XV-Z12000 | XVZ12000 Operation Manual - Page 43
has two sets of menu screens that allow you to adjust the image and various projector settings. You can operate the menus from the projector or remote control using the following procedure. Menu screen for INPUT 1, INPUT 2 or INPUT 5 Mode Menu screen for INPUT 3 or INPUT 4 Mode Menu Bar (Main - Sharp XV-Z12000 | XVZ12000 Operation Manual - Page 44
2 Press \ or | to select the menu you want to adjust. Note • For details on the menus, see the tree charts on pages 40 and 41. 3 Press " or ' to select the item you want to adjust. Note • To display a single adjustment item, press after selecting the item. Only the menu bar and the selected - Sharp XV-Z12000 | XVZ12000 Operation Manual - Page 45
Using the Menu Screen Menu Selections (Settings) 1 Press . • The menu screen is displayed. Note • The "Picture" menu screen for the selected input mode is displayed. • The - Sharp XV-Z12000 | XVZ12000 Operation Manual - Page 46
will display a confirmation message. When setting an item, press \ or | to select "Yes" or "OK" and then press . • Use to select "ON" or "OFF" for the item of "Economy Mode". • Use to select setting for the item of "Specials" in the "Picture" menu. 7 Press . • The menu will disappear. Sub menu - Sharp XV-Z12000 | XVZ12000 Operation Manual - Page 47
Adjusting the Picture You can adjust the projector's picture to your preferences with the following Selected Position Standard Natural Dynamic Custom 1 Custom 2 INPUT1 Position to INPUT5 Position Description Sharp default setting A balanced color image is obtained. A vivid image is obtained. Allows - Sharp XV-Z12000 | XVZ12000 Operation Manual - Page 48
the menu screen. ➝For operating the menu screen, see pages 42 to 45. Basic Operation Selected Item Description \ button | button Contrast Bright Color Tint Sharp CLR Temp For adjusting the contrast level For less contrast For more contrast For adjusting the brightness of an image For less - Sharp XV-Z12000 | XVZ12000 Operation Manual - Page 49
Adjusting the Picture Selecting the C.M.S. Position This function allows you to select the desired color reproduction mode. Select "C.M.S. Position" in the "Picture" menu on the menu screen. ➝For operating the menu screen, see pages 42 to 45. Note • Color can be adjusted in greater detail with - Sharp XV-Z12000 | XVZ12000 Operation Manual - Page 50
recording with the original encoded as is at 24 frames/second. The projector can convert this film source to progressive video at 60 frames/second and SECAM to play back a high-definition image. Note • When using progressive inputs, inputs are directly displayed so that 2D Progressive, 3D - Sharp XV-Z12000 | XVZ12000 Operation Manual - Page 51
Adjusting the Picture Emphasizing the Contrast This function emphasizes the bright portions of images to obtain a higher contrast image. Select "White Emph" in the "Specials" menu on the "Picture" menu screen. • "White Emph" is switched "ON" and "OFF" by pressing . ➝For operating the menu screen, - Sharp XV-Z12000 | XVZ12000 Operation Manual - Page 52
45. Selected Item (OFF) (Level 1) Description Sharp default setting Emphasize outlines a little (Level 2) (Level 3) Emphasize outlines most Resetting All Adjustment Items This function allows you to reset all adjustment items to the default setting. Select "Reset" in the "Picture" menu on the - Sharp XV-Z12000 | XVZ12000 Operation Manual - Page 53
Gamma Custom 1-2 SVM Gamma Description Sharp default setting Gives greater depth to darker portions of image. A strong, clearly distinguishable image is obtained Allows you to adjust the gamma curve for each of RGB. Allows you to adjust gamma value using SharpVision Manager Software. Note • The - Sharp XV-Z12000 | XVZ12000 Operation Manual - Page 54
Select the gamma item in the "Gamma" menu on the menu screen. ➝For operating the menu screen, see pages 42 to 45. Note • To reset all adjustment items, select "Re- set" and press . Selected Item Description R-Gamma For adjusting the display characteristic of red color (Red Gamma) G-Gamma For - Sharp XV-Z12000 | XVZ12000 Operation Manual - Page 55
" in the "C.M.S." menu on the menu screen. ➝For operating the menu screen, see pages 42 to 45. Selected Item Standard Film Tone Custom 1-2 Description Sharp default setting A balanced color image is obtained. "Lightness", "Chroma" and "Hue" can be adjusted for each of the six colors. Note • If - Sharp XV-Z12000 | XVZ12000 Operation Manual - Page 56
Setting the Brightness of the Target Color Select "Lightness" in the "C.M.S." menu on the menu screen. ➝For operating the menu screen, see pages 42 to 45. Setting the Chromatic Value of the Target Color Select "Chroma" in the "C.M.S." menu on the menu screen. ➝For operating the menu screen, see - Sharp XV-Z12000 | XVZ12000 Operation Manual - Page 57
All Colors) Description "Lightness", "Chroma" and "Hue" of the color selected for "Target" are reset to the default setting. "Lightness", "Chroma" and "Hue" of all colors are reset to the default setting. Overview of All Color Settings Select "View Settings" in the "C.M.S." menu on the menu screen - Sharp XV-Z12000 | XVZ12000 Operation Manual - Page 58
Adjusting Computer Images Use the Fine Sync function in case of irregularities page 59 for details. • To reset all adjustment items, select "Reset" and press . Saving Adjustment Settings This projector allows you to store up to seven adjustment settings for use with various computers. Select "Save - Sharp XV-Z12000 | XVZ12000 Operation Manual - Page 59
not been set, a resolution and frequency setting will not be displayed. • When selecting a stored adjustment setting with "Select Setting", you can set the projector in the stored adjustments. Special Mode Settings Ordinarily, the type of input signal is detected and the correct resolution mode is - Sharp XV-Z12000 | XVZ12000 Operation Manual - Page 60
➝For operating the menu screen, see pages 42 to 45. Auto Sync Adjustment Used to automatically adjust a computer image. Select "Auto Sync" in the "Fine will occur when the projector is turned on or when the inputs are switched, while connected to a computer. Manual adjustments should be performed: - Sharp XV-Z12000 | XVZ12000 Operation Manual - Page 61
Adjusting Computer Images Auto Sync Display Function Used to set the screen displayed during Auto Sync. Select "Auto Sync Disp" in the "Fine Sync" menu on the menu screen. ➝For operating the menu - Sharp XV-Z12000 | XVZ12000 Operation Manual - Page 62
Easy to Use Functions Easy to Use Functions XV_Z12000_E_US_p61_65.p65 61 03.9.24, 2:04 PM - Sharp XV-Z12000 | XVZ12000 Operation Manual - Page 63
the input signal, you can choose "SIDE BAR", "SMART STRETCH", "CINEMA ZOOM", "STRETCH", "NORMAL" or "DOT BY DOT" image. Switching the Picture Display Using Different Input Signals Press . • Each time is pressed, the display changes as shown on pages 63 and 64. RESIZE button Info • In the Dot - Sharp XV-Z12000 | XVZ12000 Operation Manual - Page 64
Letterbox Squeeze * * * * 540P 1080I 16:9 aspect ratio 720P * "Digi. Shift" and "Subtitle" only move when in the "SMART STRETCH" and "CINEMA ZOOM" modes. Easy to Use Functions XV_Z12000_E_US_p61_65.p65 63 03.9.24, 2:04 PM -63 - Sharp XV-Z12000 | XVZ12000 Operation Manual - Page 65
Selecting the Picture Display Mode COMPUTER For 4:3 aspect ratio For without 4:3 aspect ratio Input Signal SVGA (800 ן600) XGA (1024 ן768) SXGA (1280 ן960) SXGA (1280 ן1024) Output screen image NORMAL DOT BY DOT VGA 4:3 aspect ratio (640 ן480) SVGA 4:3 aspect ratio (800 ן - Sharp XV-Z12000 | XVZ12000 Operation Manual - Page 66
It can be operated using the IRIS button on the remote control. Switching HIGH BRIGHTNESS MODE/ HIGH CONTRAST MODE Press on the remote control to select the Note • The projector is set to the "HIGH BRIGHTNESS MODE" when shipped from the factory. Easy to Use Functions XV_Z12000_E_US_p61_65.p65 - Sharp XV-Z12000 | XVZ12000 Operation Manual - Page 67
the entire image projected on the screen up or down when projecting 16:9 images from DVD players and DTV* decoders. * DTV is the umbrella term used to describe the new digital television system in the United States. Adjusting the Digital Shift Select "Digi. Shift" in the "Options" menu on the menu - Sharp XV-Z12000 | XVZ12000 Operation Manual - Page 68
. (LEDs turn on while the projector is in the standby mode, warming up or indicating problems.) Note • When Auto Power Off function is set to "OFF", "LED" is set to "ON" automatically. Be sure to set Auto Power Off function to "ON" to use LED Off function. (See page 72.) Displaying the Lamp Usage - Sharp XV-Z12000 | XVZ12000 Operation Manual - Page 69
Display", the input mode display (e.g. INPUT 1) will not appear, even if the INPUT button is pressed. Turning off the On-screen Display Select "OSD Display" in the "Options" menu on the menu screen. (Power off/Temp./Change The Lamp., etc.)) -68 XV_Z12000_E_US_p66_74.p65 68 03.9.24, 2:05 PM - Sharp XV-Z12000 | XVZ12000 Operation Manual - Page 70
1 and 2, or Digital PC RGB, Digital PC Component, Digital Video RGB, Digital Video Component, Analog RGB or Analog Component for INPUT 5. Easy to Use Functions Selecting the Signal Type Select "Signal Type" in the "Options" menu on the menu screen. ➝For operating the menu screen, see pages 42 to - Sharp XV-Z12000 | XVZ12000 Operation Manual - Page 71
to NTSC video equipment. Setting a Background Image This function allows you to select the image displayed when no signal is being sent to the projector. Selecting a Background Image Select "Background" in the "Options" menu on the menu screen. ➝For operating the menu screen, see pages 42 to 45 - Sharp XV-Z12000 | XVZ12000 Operation Manual - Page 72
power consumption of the projector. Easy to Use Functions Setting the Power Function This projector consumes power when using a computer connected to the RS-232C terminal. When not using these terminals "ON" when using the SharpVision Manager Software. XV_Z12000_E_US_p66_74.p65 71 Status ON - Sharp XV-Z12000 | XVZ12000 Operation Manual - Page 73
automatically. Be sure to set Auto Power Off function to "ON" to use LED Off function. (See page 67.) Selecting the Transmission Speed (RS-232C that both the projector and com- puter are set for the same baud rate. Refer to the computer's operation manual for instructions for setting the computer - Sharp XV-Z12000 | XVZ12000 Operation Manual - Page 74
Reversing/Inverting Projected Images This projector is equipped with a reverse/invert image function that allows image Reversed image Reversed and inverted image Note • This function is used for the reversed image and ceiling-mount setups. See page 32 for these setups. Front Ceiling+Front Rear - Sharp XV-Z12000 | XVZ12000 Operation Manual - Page 75
Displaying the Adjustment Settings This function can be used to display all the adjusted settings as a list on the screen. Overview of All Menu Settings Select the "Status" menu on the menu screen and - Sharp XV-Z12000 | XVZ12000 Operation Manual - Page 76
Appendix Appendix XV_Z12000_E_US_p75_88.p65 75 03.9.26, 6:38 PM - Sharp XV-Z12000 | XVZ12000 Operation Manual - Page 77
agents in the plastic may cause damage to the quality or finish of the projector. Cleaning the lens I Use a commercially available blower or lens cleaning paper (for glasses and camera lenses) for cleaning the lens. Do not use any liquid type cleaning agents, as they may wear off the coating film - Sharp XV-Z12000 | XVZ12000 Operation Manual - Page 78
more often when the projector is used in a dirty or smoky location. Side and Rear view Bottom view Ventilative holes Ventilative holes Ventilative holes Ventilative holes Cleaning the Ventilative Holes 1 Press on the projector or on the remote control to put the projector into the standby - Sharp XV-Z12000 | XVZ12000 Operation Manual - Page 79
on/ Standby Red blinks The lamp does not illuminate. Lamp replacement time. • Burnt-out lamp • Lamp circuit failure • The lamp usage time has exceeded 1,900 hours. • Carefully replace the lamp. (See page 81) • Take the projector to your nearest Authorized SharpVision Service Center or Dealer for - Sharp XV-Z12000 | XVZ12000 Operation Manual - Page 80
or some other cause while using the projector, and the power supply recovers immediately after that, the lamp indicator will illuminate in red and the lamp may not be lit. In this case, unplug the power cord from the AC outlet, replace the power cord in the AC outlet and then turn the power on again - Sharp XV-Z12000 | XVZ12000 Operation Manual - Page 81
, take your projector to the nearest Authorized SharpVision Service Center or Dealer for repair. Purchase a replacement lamp unit of type BQCXVZ100005 from your nearest Authorized SharpVision Service Center or Dealer. Then carefully change the lamp by following the instructions described in this - Sharp XV-Z12000 | XVZ12000 Operation Manual - Page 82
to the installation manual included with the lamp unit. 1 Press on the projector or STANDBY on the remote control to put the projector into the standby mode. • Wait until the cooling fan stops. Warning! • Do not remove the lamp unit from the projector right after use. The lamp will be very - Sharp XV-Z12000 | XVZ12000 Operation Manual - Page 83
side of the projector. Then tighten the user service screws. Info • If the lamp unit and lamp cover are not correctly installed, the power will not turn on, even if the power cord is connected to the projector. Resetting the Lamp Timer Reset the lamp timer after replacing the lamp. 1 Connect the - Sharp XV-Z12000 | XVZ12000 Operation Manual - Page 84
Connecting Pin Assignments DVI-I (INPUT 5 / DIGITAL INPUT) port: 29 pin connector C3 24 23 18 17 C5 C4 C2 C1 8 7 ~ 2 1 16 ~ 9 • DVI Digital INPUT Pin No. Signal Pin No. 1 T.M.D.S data 2- 16 2 T.M.D.S data 2+ 17 3 T.M.D.S data 2 shield 18 4 Not connected 19 5 Not connected 20 - Sharp XV-Z12000 | XVZ12000 Operation Manual - Page 85
turned on, and then transmit the next command. Note • When using the computer control function of the projector, the projector -10. Computer RABR _ - 1 0 → ← Projector OK BUTTONS & REMOTE CONTROL KEY BUTTONS & REMOTE CONTROL KEY CONTROL CONTENTS COMMAND PARAMETER RETURN POWER ON P O W R - Sharp XV-Z12000 | XVZ12000 Operation Manual - Page 86
(-30 - +30) R A T I _ * * * OK OR ERR INPUT 1 SHARP (-30 - +30) R A S H _ * * * OK OR ERR INPUT 1 CLR R A R E _ _ _ 0 OK OR ERR INPUT 1 ADJUSTMENT RESET R A R E _ _ _ 1 OK OR ERR INPUT 2 PICTUR XV_Z12000_E_US_p75_88.p65 85 GAMMA PICTURE CONTROL CONTENTS COMMAND PARAMETER RETURN INPUT - Sharp XV-Z12000 | XVZ12000 Operation Manual - Page 87
G M O B _ * * * OK OR ERR GAMMA RESET G M R E _ _ _ 1 OK OR ERR INPUT USE A P O W _ _ _ 0 OK OR ERR AUTO POWER OFF : USE A P O W _ _ _ 1 OK OR ERR LAMP CONTROL CONTENTS. • *1 FINE SYNC can only be set in the displayed RGB mode. • The return value of "TLTT_ _ _ 1" becomes "0" when the projector - Sharp XV-Z12000 | XVZ12000 Operation Manual - Page 88
11 0 0 1 0 Wired remote control function code LSB MSB C1 Sharp remote control using Pulse Position Modulation t T1 T0 "1" "0" "0" "0" 26.4 µs "0" "1" "0" t D • t = 264 µs • T0 = 1.05 ms • T1 = 2.10 ms • Pulse carrier frequency = 37.917 kHz • Duty ratio = 1:1 Transmission control - Sharp XV-Z12000 | XVZ12000 Operation Manual - Page 89
is a list of modes that conform to VESA. However, this projector supports other signals that are not VESA standards. PC/ MAC/ WS manual. • When this projector receives 640 × 350 VESA format VGA signals, "640 × 400" appears on the screen. • When projecting moving image of interlace signals using - Sharp XV-Z12000 | XVZ12000 Operation Manual - Page 90
Troubleshooting Problem No picture and no sound or projector does not start. Color is faded or poor. Check • Projector power cord is not of the projector. • Remote control batteries have run out. • External output has not been set when connecting notebook computer. • The cover of the lamp unit is - Sharp XV-Z12000 | XVZ12000 Operation Manual - Page 91
Troubleshooting Problem Picture is green on INPUT 1 or 2 COMPO- NENT. Picture is pink (no green) on INPUT 1 or 2 RGB. Picture is dark. Picture is too bright and whitish. A response code cannot be received when the projector was attempted to be controlled using RS-232C commands from a computer - Sharp XV-Z12000 | XVZ12000 Operation Manual - Page 92
(9'10", 3.0 m), Terminal cover, Lens cap (attached), SharpVision Manager Software CD-ROM, Projector operation manual, SharpVision Manager operation manual Replacement parts Lamp unit (Lamp/cage module) (BQC-XVZ100005), Remote control (RRMCGA216WJSA), AA size batteries , Power cord (CACCDA024DE01 - Sharp XV-Z12000 | XVZ12000 Operation Manual - Page 93
Dimensions Units: inches (mm) Rear View Side View Top View Side View 15 49/50 (406) 7 (178) Front View Bottom View 18 11/16 (475) -92 XV_Z12000_E_US_p89_96.p65 92 03.9.24, 2:10 PM - Sharp XV-Z12000 | XVZ12000 Operation Manual - Page 94
to adjust vertical noise when clock level is incorrect. CLR Temp (Color temperature) Function that can be used to adjust the color temperature to suit the type of image input to the projector. Decrease the color temperature to create warmer, reddish images for natural flesh tones, or increase to - Sharp XV-Z12000 | XVZ12000 Operation Manual - Page 95
13 Ceiling-mount setup 32 CD control 12 Remote control sensor 13 Replacing the lamp 80 RESIZE button 62 Reversing/Inverting Projected Images 73 RGB/COMP. button 69 RS-232C terminal 25 Save Setting 57 Select Setting 58 Selecting the on-screen display language .......... 36 SharpVision - Sharp XV-Z12000 | XVZ12000 Operation Manual - Page 96
Coverage (if any): Where to Obtain Service: What to do to Obtain Service: XV-Z12000 Projector (Be sure to have this information available when you need service for your Product.) One (1) year parts and labor from date of purchase except for the Projector Lamp for which the warranty period is ninety - Sharp XV-Z12000 | XVZ12000 Operation Manual - Page 97
specified or approved by Sharp, including but not limited to head cleaning tapes and chemical cleaning agents. (d) Any replacement of accessories, glassware, consumable or peripheral items required through normal use of the product including but not limited to earphones, remote controls, AC adapters
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
-
79
-
80
-
81
-
82
-
83
-
84
-
85
-
86
-
87
-
88
-
89
-
90
-
91
-
92
-
93
-
94
-
95
-
96
-
97
 |
 |
SHARP CORPORATION
Printed in Japan
Imprimé au Japon
Impreso en Japón
Impresso no Japão
TINS-A970WJZZ
XV-Z12000
OPERATION MANUAL
MODE D’EMPLOI
MANUAL DE OPERACION
MANUAL DE OPERAÇÃO
XV
-
Z12000
PROJECTOR
PROJECTEUR
PROYECTOR
PROJETOR
ENGLISH
.............
-1 –
-96
FRANÇAIS
...........
-1 –
-95
ESPAÑOL
............
-1 –
-94
PORTUGUÊS
......
-1 –
-94
Printed on 100% post-consumer recycled paper.
Imprimé sur 100% de papier recyclé.
Impreso en 100% de papel reciclado de postconsumo.
Papel 100% Reciclado - Cuidado do Meio Ambiente.
XV_Z12000_E_US_Hyo1_4.p65
03.9.29, 11:39 AM
1