Sharp XV-Z12000MARKII XV-Z12000 Operation Manual
Sharp XV-Z12000MARKII Manual
 |
View all Sharp XV-Z12000MARKII manuals
Add to My Manuals
Save this manual to your list of manuals |
Sharp XV-Z12000MARKII manual content summary:
- Sharp XV-Z12000MARKII | XV-Z12000 Operation Manual - Page 1
PROJECTOR PROJECTEUR PROYECTOR PROJETOR XV-Z12000 OPERATION MANUAL MODE D'EMPLOI MANUAL DE OPERACION MANUAL DE OPERAÇÃO ENGLISH 1 - -96 FRANÇAIS 1 - -95 ESPAÑOL 1 - -94 PORTUGUÊS ...... -1 - -94 - Sharp XV-Z12000MARKII | XV-Z12000 Operation Manual - Page 2
read this operation manual carefully. Introduction Model No.: XV-Z12000 Serial No.: There are two important reasons for prompt warranty registration of your new SHARP Projector, presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. - Sharp XV-Z12000MARKII | XV-Z12000 Operation Manual - Page 3
and, if not installed and used in accordance with the operation manual, may cause harmful interference to radio communications. However, there radio/TV technician for help. U.S.A. ONLY Declaration of Conformity SHARP PROJECTOR, MODEL XV-Z12000 This device complies with Part 15 of the FCC rules - Sharp XV-Z12000MARKII | XV-Z12000 Operation Manual - Page 4
Introduction Contents Introduction Contents 3 IMPORTANT SAFEGUARDS 5 How to Access the PDF Operation Manuals of SharpVision Manager 8 Quick Guide 9 Part Names 10 Projector (Front and Top View 10 Projector (Rear View 11 Remote Control (Front View 12 Remote Control (Top View 12 Using the - Sharp XV-Z12000MARKII | XV-Z12000 Operation Manual - Page 5
the Lamp Timer 82 Connecting Pin Assignments 83 (RS-232C) Specifications and Command Settings 84 Wired Remote Control Terminal Specifications 87 Computer Compatibility Chart 88 Troubleshooting 89 For SHARP Assistance (U.S.A only 90 Specifications 91 Dimensions 92 Glossary 93 Index 94 -4 - Sharp XV-Z12000MARKII | XV-Z12000 Operation Manual - Page 6
the following basic rules for its installation, use and servicing. 1. Read Instructions All the safety and operating instructions should be read before the product is operated. 2. Retain Instructions The safety and operating instructions should be retained for future reference. 3. Heed Warnings All - Sharp XV-Z12000MARKII | XV-Z12000 Operation Manual - Page 7
normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions, as an improper adjustment of 20. Safety Check Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine - Sharp XV-Z12000MARKII | XV-Z12000 Operation Manual - Page 8
For minimal servicing and to maintain high image qual- ity, SHARP recommends that manuals of the projector and the equipment to be connected for instructions on how to make the connections. Temperature monitor function I If the projector starts to overheat due to setup problems - Sharp XV-Z12000MARKII | XV-Z12000 Operation Manual - Page 9
you want to view. 6 Double click the installation program and follow the instructions on the screen. For Macintosh: 1 Insert the CD-ROM in the CD Double click the "SVM2" pdf file to access the SharpVision Manager manual. Note • The installer of SharpVision Manager may start automatically when the - Sharp XV-Z12000MARKII | XV-Z12000 Operation Manual - Page 10
Introduction Quick Guide In this page, connection of the projector and the video equipment is explained as an example for the procedure from setup to projection. Refer to - Sharp XV-Z12000MARKII | XV-Z12000 Operation Manual - Page 11
Names Numbers in refer to the main pages in this operation manual where the topic is explained. Projector (Front and Top . Intake vent 27 Adjustment foot 13 Remote control sensor In this operation manual, the illustration and the screen display are simplified for explanation, and may differ slightly from - Sharp XV-Z12000MARKII | XV-Z12000 Operation Manual - Page 12
has a Kensington Security Standard connector for use with a Kensington MicroSaver Security System. Refer to the information that came with the system for instructions on how to use it to secure the projector. Using the Terminal Cover When the projector is used on a desktop, high mounted or - Sharp XV-Z12000MARKII | XV-Z12000 Operation Manual - Page 13
Part Names Remote Control (Front View) STANDBY button 37 For putting the projector into the standby mode. KEYSTONE button 38 For adjusting Keystone Correction or Vertical Size setting. ENTER button 43 For setting items selected or adjusted on the menu. UNDO button 43 For undoing an operation or - Sharp XV-Z12000MARKII | XV-Z12000 Operation Manual - Page 14
Using the Remote Control Introduction Available Range of the Remote Control I The remote control can be used to control the projector within the ranges shown in the illustration. Note • The signal from the remote control can be reflected off a screen for easy operation. However, the effective - Sharp XV-Z12000MARKII | XV-Z12000 Operation Manual - Page 15
ROM (SharpVision Manager) UDSKAA040WJZZ Terminal cover CCOVA1985CE03 Operation manual (this manual) TINS-A970WJZZ SharpVision Manager operation manual TINS-B097WJZZ Optional accessories 3 RCA to 15-pin the region. Please check with your nearest Authorized SharpVision Service Center or Dealer. -14 - Sharp XV-Z12000MARKII | XV-Z12000 Operation Manual - Page 16
Connections and Setup Connections and Setup - Sharp XV-Z12000MARKII | XV-Z12000 Operation Manual - Page 17
a computer, be sure that it is the last device to be turned on after all the connections are made. • Be sure to read the operation manuals of the devices to be connected before making connections. This projector can be connected to: Video equipment: I A VCR, DVD player or other video equipment (See - Sharp XV-Z12000MARKII | XV-Z12000 Operation Manual - Page 18
Connections and Setup Connecting to Video Equipment Connecting to Video Equipment Using an S-video or a Composite Video Cable (INPUT 3 or 4) Using an S-video or a composite video cable, a VCR, DVD player or other video equipment can be connected to INPUT 3 or INPUT 4 input terminal. 1 Connect an - Sharp XV-Z12000MARKII | XV-Z12000 Operation Manual - Page 19
Connecting the Projector to Other Devices Connecting to Component Video Equipment Using a Component Cable (INPUT 1 or 2) Use a component cable when connecting the component video equipment such as DVD players and DTV* decoders to INPUT 1 or 2 terminals. * DTV is the umbrella term used to describe - Sharp XV-Z12000MARKII | XV-Z12000 Operation Manual - Page 20
HD/C sync) and (VD) terminals may be used depending on the specifications of the DTV decoder connected to this projector. Please refer to the operation manual of the DTV decoder for details. Connecting to RGB Video Equipment Using the DVI to 15-pin D-sub Adaptor and the RGB Cable (INPUT 5) 1 Connect - Sharp XV-Z12000MARKII | XV-Z12000 Operation Manual - Page 21
Connecting the Projector to Other Devices Connecting to Component Video Equipment Using a 3 RCA to 15-pin D-sub Cable and the DVI to 15-pin D-sub Adaptor (INPUT 5) Use a 3 RCA to 15-pin D-sub cable and the DVI to 15-pin D-sub adaptor when connecting component video equipment such as DVD players and - Sharp XV-Z12000MARKII | XV-Z12000 Operation Manual - Page 22
Connecting to Video Equipment with the HDMI Output Terminal Using a DVI to HDMI Cable (INPUT 5) Use a DVI to HDMI cable when connecting HDMI video equipment such as DVD players to INPUT 5 terminal. 1 Connect a DVI to HDMI cable to the projector. • Secure the connectors by tightening the thumbscrews. - Sharp XV-Z12000MARKII | XV-Z12000 Operation Manual - Page 23
required for use with some Macintosh computers. Contact your nearest Authorized SharpVision Service Center or Dealer. • Depending on the computer you are using, an switched to the external output. Refer to the computer operation manual for switching the computer signal output settings. DVI to 15- - Sharp XV-Z12000MARKII | XV-Z12000 Operation Manual - Page 24
Connections and Setup Connecting to a Computer Using a DVI Cable (INPUT 5) 1 Connect a DVI cable to the pro- jector. 2 Connect the above cable to the computer. • Secure the connectors by tightening the thumbscrews. Optional accessory To INPUT 5 terminal DVI cable Type: AN-C3DV (9'10'' (3.0 m)) - Sharp XV-Z12000MARKII | XV-Z12000 Operation Manual - Page 25
Connecting the Projector to Other Devices Connecting the thumbscrew cables I Connect the thumbscrew cable making sure that it fits correctly into the terminal. Then, firmly secure the connectors by tightening the screws on both sides of the plug. I Do not remove the ferrite core attached to the RGB - Sharp XV-Z12000MARKII | XV-Z12000 Operation Manual - Page 26
. This may damage your computer. • The RS-232C function may not operate if your computer terminal is not correctly set up. Refer to the operation manual of the computer for details. To RS-232C terminal RS-232C cable (commercially available) To RS-232C terminal Desktop computer -25 - Sharp XV-Z12000MARKII | XV-Z12000 Operation Manual - Page 27
be used due to the range or positioning of the projector (rear projection, etc.), connect a ø3.5 mm minijack cable (commercially available or available as Sharp service part QCNWGA038WJPZ) from the WIRED R/C JACK on the top of the remote control to the WIRED REMOTE control input terminal. To WIRED - Sharp XV-Z12000MARKII | XV-Z12000 Operation Manual - Page 28
Setup Using the Adjustment Feet The height of the projector can be adjusted using the adjustment feet when the projector is placed on an uneven surface or when the screen is slanted. The position of the projected image can be made higher by adjusting the projector when it is in a location lower than - Sharp XV-Z12000MARKII | XV-Z12000 Operation Manual - Page 29
Setup Adjusting the Lens The image is focused and adjusted to the desired size using the focus ring or zoom knob on the projector. 1 The focus is adjusted by rotat- ing the focus ring. Focus ring Zoom knob 2 Zooming is adjusted by mov- ing the zoom knob. Focus ring Zoom in Zoom out Zoom Knob - Sharp XV-Z12000MARKII | XV-Z12000 Operation Manual - Page 30
Using the Lens Shift The height of the projected image can be adjusted within the shift range of the lens by rotating the lens shift dial on the top of the projector. Note • Do not turn the lens shift dial beyond the upper limit and lower limit positions. This may cause the projector to malfunction. - Sharp XV-Z12000MARKII | XV-Z12000 Operation Manual - Page 31
Setup Setting up the Screen Position the projector perpendicular to the screen with all feet flat and level to achieve an optimal image. Note • The projector lens should be centered in the middle of the screen. If the horizontal line passing through the lens center is not perpendicular to the - Sharp XV-Z12000MARKII | XV-Z12000 Operation Manual - Page 32
Screen Size and Projection Distance x yz Connections and Setup When using a normal screen (4:3) In case of setting the 16:9 picture to the full horizontal width of the 4:3 screen. 4 3 : Screen area : Picture area Screen size (4:3) Projection distance (y) Diag. (x) 250" 200" 150" 100" 84" 72" 60 - Sharp XV-Z12000MARKII | XV-Z12000 Operation Manual - Page 33
of the audience. Ceiling-mount setup I It is recommended that you use the optional Sharp ceiling-mount bracket for this installation. I Before mounting the projector, contact your nearest Authorized SharpVision Service Center or Dealer to obtain the recommended ceiling-mount bracket (sold separately - Sharp XV-Z12000MARKII | XV-Z12000 Operation Manual - Page 34
Basic Operation Basic Operation - Sharp XV-Z12000MARKII | XV-Z12000 Operation Manual - Page 35
Image Projection Basic Procedure Connect the required external equipment to the projector before operating the following procedures. Info • The language preset at the factory is English. If you want to change the on-screen display to another language, reset the language according to the procedure - Sharp XV-Z12000MARKII | XV-Z12000 Operation Manual - Page 36
3 Press , , , or on the remote control or on the projector to select the INPUT mode. • After pressing once on the projector, use to select the desired input mode. Note • When no signal is received, "NO SIGNAL" will be displayed. When a signal that the projector is not preset to receive is received - Sharp XV-Z12000MARKII | XV-Z12000 Operation Manual - Page 37
Image Projection Selecting the On-screen Display Language • The on-screen display language of the projector can be set to English, German, Spanish, Dutch, French, Italian, Swedish, Portuguese, Chinese, Korean or Japanese. 1 Press . • The menu will be displayed. 2 Press \ or | to select "Lan- guage". - Sharp XV-Z12000MARKII | XV-Z12000 Operation Manual - Page 38
Turning the Power off 1 Press on the remote control or on the projector, then press or again while the confirmation message is displayed, to put the projector into the standby mode. STANDBY button ENTER button Note • If you accidentally pressed and do not want to put the projector into the standby - Sharp XV-Z12000MARKII | XV-Z12000 Operation Manual - Page 39
Keystone Correction and Vertical Size Adjustment Correcting Trapezoidal Distortion and Adjusting the Vertical Size of the Picture This function allows for Keystone (On-screen Trapezoidal Distortion) Correction and the adjustment of the vertical size of the picture. KEYSTONE button ENTER button - Sharp XV-Z12000MARKII | XV-Z12000 Operation Manual - Page 40
3 When adjusting vertical size, pressing again displays the vertical size adjustment menu. 4 Press "and ' to adjust the vertical size of the picture, and press . • See below for details about the vertical size screen. Vertical Size Adjustment The image aspect ratio may change when the lens shift - Sharp XV-Z12000MARKII | XV-Z12000 Operation Manual - Page 41
Main menu Picture Page 46 Sub menu Picture Position Contrast -30 +30 Bright -30 +30 Color -30 +30 Tint -30 +30 Sharp -30 +30 CLR Temp 5000 11000 Gamma Position C.M.S. Position Specials Reset Standard Natural Dynamic Custom 1 Custom 2 INPUT1/2/5 Position Standard Black Detail Dynamic - Sharp XV-Z12000MARKII | XV-Z12000 Operation Manual - Page 42
Gamma Page 52 C.M.S. Page 54 Sub menu Picture Position Contrast -30 +30 Bright -30 +30 Color -30 +30 Tint -30 +30 Sharp -30 +30 CLR Temp 5000 11000 Gamma Position C.M.S. Position Specials Reset Standard Natural Dynamic Custom 1 Custom 2 INPUT3/4 Position Standard Black Detail Dynamic - Sharp XV-Z12000MARKII | XV-Z12000 Operation Manual - Page 43
Using the Menu Screen This projector has two sets of menu screens that allow you to adjust the image and various projector settings. You can operate the menus from the projector or remote control using the following procedure. Menu screen for INPUT 1, INPUT 2 or INPUT 5 Mode Menu screen for INPUT - Sharp XV-Z12000MARKII | XV-Z12000 Operation Manual - Page 44
Basic Operation 2 Press \ or | to select the menu you want to adjust. Note • For details on the menus, see the tree charts on pages 40 and 41. 3 Press " or ' to select the item you want to adjust. Note • To display a single adjustment item, press after selecting the item. Only the menu bar and the - Sharp XV-Z12000MARKII | XV-Z12000 Operation Manual - Page 45
Using the Menu Screen Menu Selections (Settings) 1 Press . • The menu screen is displayed. Note • The "Picture" menu screen for the selected input mode is displayed. • The on-screen displays shown on the lower right are displayed when INPUT 1, 2 or 5 mode is selected. 2 Press \ or | to select the - Sharp XV-Z12000MARKII | XV-Z12000 Operation Manual - Page 46
4 Press |. • The cursor shifts to the sub menu. 5 Press " or ' to select the set- ting of the item displayed in the sub menu. 6 Press . • The item selected is set. Note • Some adjustment items will display a confirmation message. When setting an item, press \ or | to select "Yes" or "OK" and then - Sharp XV-Z12000MARKII | XV-Z12000 Operation Manual - Page 47
the menu screen, see pages 42 to 45. Selected Position Standard Natural Dynamic Custom 1 Custom 2 INPUT1 Position to INPUT5 Position Description Sharp default setting A balanced color image is obtained. A vivid image is obtained. Allows you to store the picture adjustment settings to your - Sharp XV-Z12000MARKII | XV-Z12000 Operation Manual - Page 48
the menu screen. ➝For operating the menu screen, see pages 42 to 45. Basic Operation Selected Item Description \ button | button Contrast Bright Color Tint Sharp CLR Temp For adjusting the contrast level For less contrast For more contrast For adjusting the brightness of an image For less - Sharp XV-Z12000MARKII | XV-Z12000 Operation Manual - Page 49
Adjusting the Picture Selecting the C.M.S. Position This function allows you to select the desired color reproduction mode. Select "C.M.S. Position" in the "Picture" menu on the menu screen. ➝For operating the menu screen, see pages 42 to 45. Note • Color can be adjusted in greater detail with - Sharp XV-Z12000MARKII | XV-Z12000 Operation Manual - Page 50
Basic Operation IP Mode This function allows you to select the progressive display of a video signal. The progressive display projects a smoother video image. Select "IP Mode" in the "Specials" menu on the "Picture" menu screen. •"IP Mode" is switched by pressing . ➝For operating the menu screen, - Sharp XV-Z12000MARKII | XV-Z12000 Operation Manual - Page 51
Adjusting the Picture Emphasizing the Contrast This function emphasizes the bright portions of images to obtain a higher contrast image. Select "White Emph" in the "Specials" menu on the "Picture" menu screen. • "White Emph" is switched "ON" and "OFF" by pressing . ➝For operating the menu screen, - Sharp XV-Z12000MARKII | XV-Z12000 Operation Manual - Page 52
. •"DFC" is switched by pressing . ➝For operating the menu screen, see pages 42 to 45. Selected Item (OFF) (Level 1) Description Sharp default setting Emphasize outlines a little (Level 2) (Level 3) Emphasize outlines most Resetting All Adjustment Items This function allows you to reset all - Sharp XV-Z12000MARKII | XV-Z12000 Operation Manual - Page 53
Selected Item Standard Black Detail Dynamic Gamma Custom 1-2 SVM Gamma Description Sharp default setting Gives greater depth to darker portions of image. A Gamma", refer to the SharpVison Manager operation manual (supplied). Standard Black Detail Dynamic Gamma SVM Gamma Custom 2 Custom 1 -52 - Sharp XV-Z12000MARKII | XV-Z12000 Operation Manual - Page 54
Adjusting the Gamma Adjust the gamma curve to suit your preferences. These gamma values can be adjusted only when the gamma position is set to "Custom 1" or "Custom 2". Select the gamma item in the "Gamma" menu on the menu screen. ➝For operating the menu screen, see pages 42 to 45. Note • To reset - Sharp XV-Z12000MARKII | XV-Z12000 Operation Manual - Page 55
" in the "C.M.S." menu on the menu screen. ➝For operating the menu screen, see pages 42 to 45. Selected Item Standard Film Tone Custom 1-2 Description Sharp default setting A balanced color image is obtained. "Lightness", "Chroma" and "Hue" can be adjusted for each of the six colors. Note • If - Sharp XV-Z12000MARKII | XV-Z12000 Operation Manual - Page 56
Basic Operation Setting the Brightness of the Target Color Select "Lightness" in the "C.M.S." menu on the menu screen. ➝For operating the menu screen, see pages 42 to 45. Setting the Chromatic Value of the Target Color Select "Chroma" in the "C.M.S." menu on the menu screen. ➝For operating the menu - Sharp XV-Z12000MARKII | XV-Z12000 Operation Manual - Page 57
Color Management System (C.M.S.) Resetting User-Defined Color Settings Select "Reset (This Color)" or "Reset (All Colors)" in the "C.M.S." menu on the menu screen. ➝For operating the menu screen, see pages 42 to 45. Selected Item Reset (This Color) Reset (All Colors) Description "Lightness", " - Sharp XV-Z12000MARKII | XV-Z12000 Operation Manual - Page 58
Adjusting Computer Images Use the Fine Sync function in case of irregularities such as vertical stripes or flickering in portions of the screen. Basic Operation When Auto Sync is OFF When "Auto Sync" is "OFF", interference such as flickering or vertical stripes may occur if displaying tilings or - Sharp XV-Z12000MARKII | XV-Z12000 Operation Manual - Page 59
Adjusting Computer Images Selecting Adjustment Settings Adjustment settings stored in the projector can be easily accessed. Select "Select Setting" in the "Fine Sync" menu on the menu screen. ➝For operating the menu screen, see pages 42 to 45. Note • If a memory position has not been set, a - Sharp XV-Z12000MARKII | XV-Z12000 Operation Manual - Page 60
" High Speed": • Auto Sync adjustment will occur when the projector is turned on or when the inputs are switched, while connected to a computer. Manual adjustments should be performed: • When the optimum image cannot be achieved with Auto Sync adjustment. See page 57. • Auto Sync adjustment may take - Sharp XV-Z12000MARKII | XV-Z12000 Operation Manual - Page 61
Adjusting Computer Images Auto Sync Display Function Used to set the screen displayed during Auto Sync. Select "Auto Sync Disp" in the "Fine Sync" menu on the menu screen. ➝For operating the menu screen, see pages 42 to 45. Selected Item Description The image set as a background image is - Sharp XV-Z12000MARKII | XV-Z12000 Operation Manual - Page 62
Easy to Use Functions Easy to Use Functions - Sharp XV-Z12000MARKII | XV-Z12000 Operation Manual - Page 63
Selecting the Picture Display Mode This function allows you to modify or customize the picture display mode to enhance the input image. Depending on the input signal, you can choose "SIDE BAR", "SMART STRETCH", "CINEMA ZOOM", "STRETCH", "NORMAL" or "DOT BY DOT" image. Switching the Picture Display - Sharp XV-Z12000MARKII | XV-Z12000 Operation Manual - Page 64
VIDEO For 4:3 aspect ratio For 16:9 aspect ratio 480I 480P 576I 576P NTSC PAL SECAM 480P 720P 1080I SIDE BAR SMART STRETCH CINEMA ZOOM STRETCH DOT BY DOT 960 ן720 1280 ן720 1280 ן720 1280 ן720 - 960 ן720 - - 1280 ן720 - - 1280 ן720 - - 1280 ן720 1280 ן720 - Sharp XV-Z12000MARKII | XV-Z12000 Operation Manual - Page 65
Selecting the Picture Display Mode COMPUTER For 4:3 aspect ratio For without 4:3 aspect ratio Input Signal SVGA (800 ן600) XGA (1024 ן768) SXGA (1280 ן960) SXGA (1280 ן1024) Output screen image NORMAL DOT BY DOT VGA 4:3 aspect ratio (640 ן480) SVGA 4:3 aspect ratio (800 ן - Sharp XV-Z12000MARKII | XV-Z12000 Operation Manual - Page 66
Switchable High Brightness/High Contrast Mode This function controls the quantity of the projected light and the contrast of the image. It can be operated using the IRIS button on the remote control. Switching HIGH BRIGHTNESS MODE/ HIGH CONTRAST MODE Press on the remote control to select the - Sharp XV-Z12000MARKII | XV-Z12000 Operation Manual - Page 67
Digital Shift Function For easier viewing, this function shifts the entire image projected on the screen up or down when projecting 16:9 images from DVD players and DTV* decoders. * DTV is the umbrella term used to describe the new digital television system in the United States. Adjusting the - Sharp XV-Z12000MARKII | XV-Z12000 Operation Manual - Page 68
. LEDs are turned off while the projector is in operation. (LEDs turn on while the projector is in the standby mode, warming up or indicating problems.) Note • When Auto Power Off function is set to "OFF", "LED" is set to "ON" automatically. Be sure to set Auto Power Off function to - Sharp XV-Z12000MARKII | XV-Z12000 Operation Manual - Page 69
Setting On-screen Display This function allows you to turn on or off the on-screen messages. When setting " Level A" or " Level B" in "OSD Display", the input mode display (e.g. INPUT 1) will not appear, even if the INPUT button is pressed. Turning off the On-screen Display Select "OSD Display" in - Sharp XV-Z12000MARKII | XV-Z12000 Operation Manual - Page 70
Selecting the Signal Type This function allows you to select the input signal type RGB or Component for INPUT 1 and 2, or Digital PC RGB, Digital PC Component, Digital Video RGB, Digital Video Component, Analog RGB or Analog Component for INPUT 5. Easy to Use Functions Selecting the Signal Type - Sharp XV-Z12000MARKII | XV-Z12000 Operation Manual - Page 71
Setting the Video System The video input system mode is preset to "Auto"; however, a clear picture from the connected audio-visual equipment may not be received, depending on the video signal difference. In that case, switch the video signal. Setting the Video System Select "Video System" in the " - Sharp XV-Z12000MARKII | XV-Z12000 Operation Manual - Page 72
Selecting the Economy Mode These functions allow you to reduce the power consumption of the projector. Setting the Power Save Select "Power Save" in "Economy Mode" under the "Options" menu on the menu screen. • "Power Save" is switched "ON" and "OFF" by pressing . ➝For operating the menu screen, - Sharp XV-Z12000MARKII | XV-Z12000 Operation Manual - Page 73
42 to 45. Note • Make sure that both the projector and com- puter are set for the same baud rate. Refer to the computer's operation manual for instructions for setting the computer's baud rate. -72 - Sharp XV-Z12000MARKII | XV-Z12000 Operation Manual - Page 74
Reversing/Inverting Projected Images This projector is equipped with a reverse/invert image function that allows you to reverse or invert the projected image for various applications. Setting the Projection Mode Select "PRJ Mode" in the "Options" menu on the menu screen. ➝For operating the menu - Sharp XV-Z12000MARKII | XV-Z12000 Operation Manual - Page 75
Displaying the Adjustment Settings This function can be used to display all the adjusted settings as a list on the screen. Overview of All Menu Settings Select the "Status" menu on the menu screen and press . ➝For operating the menu screen, see pages 42 to 45. -74 - Sharp XV-Z12000MARKII | XV-Z12000 Operation Manual - Page 76
Appendix Appendix - Sharp XV-Z12000MARKII | XV-Z12000 Operation Manual - Page 77
Maintenance Cleaning the projector I Be sure to unplug the power cord before clean- ing the projector. I The cabinet as well as the operation panel is made of plastic. Avoid using benzene or thinner, as these can damage the finish on the cabinet. I Do not use volatile agents such as insecticides on - Sharp XV-Z12000MARKII | XV-Z12000 Operation Manual - Page 78
Cleaning the Ventilative Holes • This projector is equipped with ventilative holes to ensure the optimal operating condition of the projector. • Periodically clean the ventilative hole by vacuuming it off with a vacuum cleaner. • The ventilative holes should be cleaned every 100 hours of use. Clean - Sharp XV-Z12000MARKII | XV-Z12000 Operation Manual - Page 79
/ Standby Condition The internal temperature is abnormally high. Problem Possible Solution • Blocked air intake • Relocate the projector (See page 81) • Take the projector to your nearest Authorized SharpVision Service Center or Dealer for repair. • Please exercise care when replacing the lamp - Sharp XV-Z12000MARKII | XV-Z12000 Operation Manual - Page 80
Info • If the temperature warning indicator illuminates, and the projector enters the standby mode, follow the pos- sible solutions on the previous page and then wait until the projector has cooled down completely before plugging in the power cord and turning the power back on. (At least 5 minutes.) - Sharp XV-Z12000MARKII | XV-Z12000 Operation Manual - Page 81
Service Center or Dealer. For the name of the nearest Authorized SharpVision Service Center or Dealer, please call toll-free: 1-877-DTV-SHARP from your nearest Authorized SharpVision Service Center or Dealer. Then carefully change the lamp by following the instructions described in this section. If - Sharp XV-Z12000MARKII | XV-Z12000 Operation Manual - Page 82
lamp unit. (Only the silver screws are loosened). • Please refer to the installation manual included with the lamp unit. 1 Press on the projector or STANDBY on the the lamp unit cover. • Loosen the user service screws that secure the lamp unit cover. Then open the cover in the direction of - Sharp XV-Z12000MARKII | XV-Z12000 Operation Manual - Page 83
in the direction of the arrow (to the close mark) on the side of the projector. Then tighten the user service screws. Info • If the lamp unit and lamp cover are not correctly installed, the power will not turn on, , this may cause the lamp to become damaged or explode. -82 2 1 User service screws - Sharp XV-Z12000MARKII | XV-Z12000 Operation Manual - Page 84
Connecting Pin Assignments DVI-I (INPUT 5 / DIGITAL INPUT) port: 29 pin connector C3 24 23 18 17 C5 C4 C2 C1 8 7 ~ 2 1 16 ~ 9 • DVI Digital INPUT Pin No. Signal Pin No. 1 T.M.D.S data 2- 16 2 T.M.D.S data 2+ 17 3 T.M.D.S data 2 shield 18 4 Not connected 19 5 Not connected 20 - Sharp XV-Z12000MARKII | XV-Z12000 Operation Manual - Page 85
. Command format C1 C2 C3 C4 P1 P2 P3 P4 Return code (0DH) Command 4-digit Response code format Normal response Parameter 4-digit Problem response (communication error or incorrect command) O K Return code (0DH) Info E R R Return code (0DH) • When more than one code is being sent, send - Sharp XV-Z12000MARKII | XV-Z12000 Operation Manual - Page 86
+30) R A B R _ * * * OK OR ERR INPUT 1 COLOR (-30 - +30) R A C O _ * * * OK OR ERR INPUT 1 TINT (-30 - +30) R A T I _ * * * OK OR ERR INPUT 1 SHARP (-30 - +30) R A S H _ * * * OK OR ERR INPUT 1 CLR TEMP (50 - 110) R A C T _ * * * OK OR ERR INPUT 1 DISPLAY R A R E _ _ _ 0 OK OR ERR INPUT - Sharp XV-Z12000MARKII | XV-Z12000 Operation Manual - Page 87
(RS-232C) Specifications and Command Settings GAMMA CONTROL CONTENTS COMMAND PARAMETER RETURN INPUT 4 GAMMA POSITION : STANDARD G M V A _ _ _ 0 OK OR ERR INPUT 4 GAMMA POSITION : BLACK DETAIL G M V A _ _ _ 1 OK OR ERR INPUT 4 GAMMA POSITION : DYNAMIC GAMMA G M V A _ _ _ 2 OK OR ERR INPUT 4 - Sharp XV-Z12000MARKII | XV-Z12000 Operation Manual - Page 88
are fixed at "10110". • Codes C14 and C15 are reverse confirmation bits, with "10" indicating "Front" and "01" indicating "Rear". Sharp remote control signal format Transmission format: 15-bit format D D D D D D D D D D D D D 67.5 ms 67.5 ms Wave form of output signal: Output using - Sharp XV-Z12000MARKII | XV-Z12000 Operation Manual - Page 89
list of modes that conform to VESA. However, this projector supports other signals that are not VESA standards. PC/ MAC/ WS Details on how to change display modes can be found in your notebook computer's operation manual. • When this projector receives 640 × 350 VESA format VGA signals, "640 × 400 - Sharp XV-Z12000MARKII | XV-Z12000 Operation Manual - Page 90
Troubleshooting Problem No picture and no sound or projector does not start. Check • Projector power cord is not plugged into the wall outlet. • Power to the external - Sharp XV-Z12000MARKII | XV-Z12000 Operation Manual - Page 91
to 30 seconds or more. Page 69 78 47 84 For SHARP Assistance (U.S.A only) If you encounter any problems during setup or operation of this projector, first refer to the "Troubleshooting" section on pages 89 and 90. If this operation manual does not answer your question, please call toll free 1-877 - Sharp XV-Z12000MARKII | XV-Z12000 Operation Manual - Page 92
Specifications Product type Projector Model XV-Z12000 Video system NTSC 3.58/NTSC 4.43/PAL/PAL-M/PAL Manager Software CD-ROM (UDSKAA040WJZZ), Projector operation manual (TINS-A970WJZZ), SharpVision Manager operation manual (TINS-B097WJZZ) This SHARP projector uses a DMD Chip. This very - Sharp XV-Z12000MARKII | XV-Z12000 Operation Manual - Page 93
Dimensions Units: inches (mm) Rear View Side View Top View Side View 15 49/50 (406) 7 (178) Front View Bottom View 18 11/16 (475) -92 - Sharp XV-Z12000MARKII | XV-Z12000 Operation Manual - Page 94
Glossary Advanced intelligent compression High quality resizing of lower and higher resolution images to fit the projector's native resolution. Aspect Ratio Width and height ratio of an image. The normal aspect ratio of a computer and video image is 4:3. There are also wide images with an aspect - Sharp XV-Z12000MARKII | XV-Z12000 Operation Manual - Page 95
Index 2D Progressive 49 3D Progressive 49 AC socket 16 Adjusting Computer Images 57 Adjusting the Lens 28 Adjusting the Picture 46 Adjustment buttons 43 Adjustment feet 27 Aspect ratio 63 Auto Power Off 72 Auto Sync Adjustment 59 AUTO SYNC button 59 Auto Sync Disp 60 Background 70 - Sharp XV-Z12000MARKII | XV-Z12000 Operation Manual - Page 96
Obtain Service: What to do to Obtain Service: XV-Z12000 Projector (Be sure to have this information available when you need service for Sharp Authorized Servicer, call Sharp toll free at 1-800-BE-SHARP. Contact your Sharp Authorized Servicer to obtain in-home service for this Product. The Servicer - Sharp XV-Z12000MARKII | XV-Z12000 Operation Manual - Page 97
installation or inappropriate use as outlined in the owner's manual. (b) Any Sharp product tampered with, modified, adjusted or repaired by any party other than Sharp, Sharp's Authorized Service Centres or Sharp's Authorized Servicing Dealers. (c) Damage caused or repairs required as a result of
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
-
79
-
80
-
81
-
82
-
83
-
84
-
85
-
86
-
87
-
88
-
89
-
90
-
91
-
92
-
93
-
94
-
95
-
96
-
97
 |
 |
XV-Z12000
OPERATION MANUAL
MODE D’EMPLOI
MANUAL DE OPERACION
MANUAL DE OPERAÇÃO
XV
-
Z12000
PROJECTOR
PROJECTEUR
PROYECTOR
PROJETOR
ENGLISH
.............
-1 –
-96
FRANÇAIS
...........
-1 –
-95
ESPAÑOL
............
-1 –
-94
PORTUGUÊS
......
-1 –
-94