Sharp XV-Z20000 XV-Z20000 Operation Manual
Sharp XV-Z20000 Manual
 |
View all Sharp XV-Z20000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Sharp XV-Z20000 manual content summary:
- Sharp XV-Z20000 | XV-Z20000 Operation Manual - Page 1
PROJECTOR PROJECTEUR PROYECTOR PROJETOR XV-Z20000/ DT-5000 OPERATION MANUAL MODE D'EMPLOI MANUAL DE MANEJO MANUAL DE OPERAÇÃO ESPAÑOL PORTUGUÊS FRANÇAIS ENGLISH - Sharp XV-Z20000 | XV-Z20000 Operation Manual - Page 2
located on the bottom of the projector and retain this information. • Before recycling the packaging, please ensure that you have checked the contents of the carton thoroughly against the list of "Supplied accessories" on page 4. Model No.: XV-Z20000/DT-5000 Serial No.: WARNING: High brightness - Sharp XV-Z20000 | XV-Z20000 Operation Manual - Page 3
and used in accordance with the operation manual, may cause harmful interference to radio Declaration of conformity SHARP PROJECTOR, MODEL XV-Z20000/DT-5000 This device complies with Part 15 of the Concerning Lamp Replacement See "Regarding the Lamp" on page 48. This SHARP projector uses a DLP® - Sharp XV-Z20000 | XV-Z20000 Operation Manual - Page 4
48 Replacing the Lamp 48 Removing and Installing the Lamp Unit 49 Resetting the Lamp Timer 50 Connecting Pin Assignments 51 RS-232C Specifications and Command Settings 52 Setup Setting Up the Projector 14 Setting Up the Projector 14 Standard Setup (Front Projection 14 Projection (PRJ) Mode - Sharp XV-Z20000 | XV-Z20000 Operation Manual - Page 5
Terminal cover • GCOVAB677WJKA for XV-Z20000 • GCOVAB677WJKB for DT-5000 Optional accessories ■ Lamp unit ■ 3 RCA to 15-pin D-sub cable (9'10" (3.0 m)) ■ DVI to 15-pin D-sub adaptor (7.9" (20 cm)) ■ DVI cable (9'10" (3.0 m)) AN-K20LP AN-C3CP2 AN-A1DV AN-C3DV Operation manual Note • Some of the - Sharp XV-Z20000 | XV-Z20000 Operation Manual - Page 6
with the product. Any mounting of the product should follow the manufacturer's instructions, and should use a mounting accessory recommended by the need for service. 19. Replacement Parts When replacement parts are required, ensure the service technician has used replacement parts specified by the - Sharp XV-Z20000 | XV-Z20000 Operation Manual - Page 7
Potential hazard of glass particles if lamp ruptures. In case of lamp rupture, contact your nearest Sharp Authorized Service Center or Dealer for replacement. See "Regarding the Lamp" on page 48. Caution concerning the setup of the projector ■ For minimal servicing and to maintain high image quality - Sharp XV-Z20000 | XV-Z20000 Operation Manual - Page 8
left corner of the picture. If the temperature continues to rise, the lamp will turn off, the temperature warning indicator on the projector will blink, and after a 90-second cooling-off period the projector will enter standby mode. Refer to "Maintenance Indica- tors/Maintenance" on page 46 for - Sharp XV-Z20000 | XV-Z20000 Operation Manual - Page 9
the screen size (SIDE BAR, SMART STRETCH, etc.). 27 INPUT button For displaying the Input list. 26 STANDBY button For putting the projector into the standby mode. 25 ON button For turning the power on. Lens shift dial 28 For moving the projected image vertically. Zoom knob 27 Focus ring 27 - Sharp XV-Z20000 | XV-Z20000 Operation Manual - Page 10
to control the projector. TRIGGER terminal When the projector is turned on, projector is turned on. WIRED REMOTE control input terminal Connecting the remote control via a cable when the projector 10 Using the Kensington Lock • This projector has a Kensington Security Standard connector for use with - Sharp XV-Z20000 | XV-Z20000 Operation Manual - Page 11
pages in this operation manual where the topic is explained. Remote Control Remote control signal 11 transmitters WIRED R/C JACK For controlling the projector by connecting the remote control to the projector. STANDBY button 26 For putting the projector into the standby mode. ENTER button 34 For - Sharp XV-Z20000 | XV-Z20000 Operation Manual - Page 12
may malfunction under a fluorescent lamp. In this case, move the projector away from the fluorescent lamp. Remote control signal transmitters 30° The batteries included with this projector may run down in a short period, depending on how they are kept. Be sure to replace them as soon as possible - Sharp XV-Z20000 | XV-Z20000 Operation Manual - Page 13
details, see the pages suggested in each step. 7 STANDBY button 3 ON button 6 Zoom knob 6 Focus ring 5 Input Mode Select buttons 6 Adjustment feet 1. Place the projector facing a screen Page 14 2. Connect the projector to the video equipment and plug the power cord into the AC socket of the - Sharp XV-Z20000 | XV-Z20000 Operation Manual - Page 14
switch the Input mode. 6. Adjust the projector angle, focus and zoom Pages 27, 28 1. The focus is adjusted by rotating the focus ring. 2. Zooming is adjusted by moving the zoom knob. 3. The projector angle is adjusted by using the adjustment feet. As for adjustment of the vertical position of - Sharp XV-Z20000 | XV-Z20000 Operation Manual - Page 15
. Standard Setup (Front Projection) ■ Place the projector at the required distance from the screen according to the desired picture size. Example of standard setup Image 90° Lens center H1 Lens shifted to lowest position H2 90° Lens center L Lens shifted to highest position L : Projection - Sharp XV-Z20000 | XV-Z20000 Operation Manual - Page 16
) Menu item ➞ "Rear" Menu item ➞ "Ceiling + Rear" Ceiling-mount Setup ■ It is recommended that you use the optional Sharp ceiling-mount bracket for this installation. Before mounting the projector, contact your nearest Sharp Authorized Service Center or Dealer to obtain the recommended ceiling - Sharp XV-Z20000 | XV-Z20000 Operation Manual - Page 17
. Use the values in the table as a reference when installing the projector. When using a wide screen (16:9): In case of displaying the 0 When using a normal screen (4:3) and projecting 4:3 image (SIDE BAR Mode) 4 Picture (Screen) size Projection distance [L] Distance from the lens center to - Sharp XV-Z20000 | XV-Z20000 Operation Manual - Page 18
more details of connection and cables, refer to the operation manual of the connecting equipment. • You may need other cables signal Cable HDMI video HDMI cable (commercially available) Terminal on the projector HDMI1, 2 Component Component cable (commercially available) video COMPONENT/ RGB1 - Sharp XV-Z20000 | XV-Z20000 Operation Manual - Page 19
HDMI is a new specialized interface capable of delivering a video and audio signal to the terminal using just one cable. Since this projector does not support an audio signal by itself, use an amplifier or other audio device. For video connection, use a cable that conforms to HDMI standards. Using - Sharp XV-Z20000 | XV-Z20000 Operation Manual - Page 20
video equipment in this way, select "Signal Type" in the "Options" menu. See page 44. Connecting Component Video Equipment to the DVI Terminal on the Projector DVD Player,etc. To component output terminal To DVI terminal 3 RCA to 15-pin D-sub cable (sold separately: AN-C3CP2) DVI to 15-pin - Sharp XV-Z20000 | XV-Z20000 Operation Manual - Page 21
DVI to 15-pin D-sub adaptor (sold separately: AN-A1DV) Note • When connecting the projector to the video equipment in this way, select "A. RGB" for "Signal Type" in the cations of the RGB equipment connected to this projector. Please refer to the operation manual of the RGB equipment for details. -20 - Sharp XV-Z20000 | XV-Z20000 Operation Manual - Page 22
Connecting Component Video Equipment to the COMPONENT/RGB Terminals on the Projector DVD Player,etc. To component output terminal To COMPONENT/RGB 1 or 2 terminals Component cable (commercially available) Connections -21 - Sharp XV-Z20000 | XV-Z20000 Operation Manual - Page 23
Connecting to Video Equipment (Continued) Connecting to Equipment with S-video Output Terminal DVD Player,etc. To S-video output terminal To S-VIDEO terminal S-video cable (commercially available) Connecting to Equipment with Video Output Terminal To video output terminal DVD Player,etc. To - Sharp XV-Z20000 | XV-Z20000 Operation Manual - Page 24
for a list of computer signals compatible with the projector. Use with computer signals other than those listed computers. Contact your nearest Sharp Authorized Service Center or Dealer. • Depending SHARP notebook computer). Refer to the specific instructions in your computer's operation manual - Sharp XV-Z20000 | XV-Z20000 Operation Manual - Page 25
if your computer terminal is not correctly set up. Refer to the operation manual of the computer for details. • For details on RS-232C specifications and the RS-232C terminal on the computer. This may damage your computer or projector. • Do not connect or disconnect an RS-232C serial control cable to - Sharp XV-Z20000 | XV-Z20000 Operation Manual - Page 26
indicator illuminates to indicate the status of the lamp. Blue: The lamp is ready. Blinking in blue: The lamp is warming up. Red: The lamp is shut down abnormally or the lamp should be replaced. • When switching on the projector, a slight flickering of the image may be experienced within the first - Sharp XV-Z20000 | XV-Z20000 Operation Manual - Page 27
then press that button again while the confirmation message is displayed, to put the projector into standby mode. 2 Unplug the power cord from the AC outlet after the cooling fan stops. • The power indicator on the projector blinks in blue while cooling. • The power indicator changes to red when the - Sharp XV-Z20000 | XV-Z20000 Operation Manual - Page 28
the Input list is displayed, follow the procedure below to switch the Input mode. Press INPUT or / to select the desired input mode. Press ENTER. • If ENTER is not pressed, the projector switches to the selected input mode in a few seconds. Note • When no signal is received, "NO SIGNAL" will be - Sharp XV-Z20000 | XV-Z20000 Operation Manual - Page 29
ngers caught in the area between the adjustment foot and the projector. • Hold the projector firmly while lifting or carrying. • Do not hold by the lens area. 4. Adjusting the Vertical Position of the Image You can move the projected image vertically by turning the lens shift dial. Info • Do not turn - Sharp XV-Z20000 | XV-Z20000 Operation Manual - Page 30
the contrast of the image. Press IRIS. • Each time the button is pressed while the display is on, the mode changes in the following order: HIGH BRIGHTNESS MODE MEDIUM MODE HIGH CONTRAST MODE Note • For details, see page 37. Adjusting the Contrast 1 Press CONTRAST. 2 Press or to adjust the con - Sharp XV-Z20000 | XV-Z20000 Operation Manual - Page 31
can be selected varies depending on the input signal (resolution and vertical frequency). • To return to the standard image, press RETURN while "RESIZE" is displayed. RETURN button RESIZE button RETURN Resize Mode RESIZE STRETCH Output screen image An image compressed from a 16:9 aspect ratio - Sharp XV-Z20000 | XV-Z20000 Operation Manual - Page 32
The use of the RESIZE, Subtitle, or Overscan function to compress or stretch the image for commercial purposes/public displays in a café, hotel, etc. the Overscan function to change the aspect ratio of a fixed-ratio input signal, parts of the outer edge of the image will be cut off or distorted. To - Sharp XV-Z20000 | XV-Z20000 Operation Manual - Page 33
menu Picture Page 36 Sub menu Picture Mode Page 36 Contrast -90 +90 Bright -90 +90 Color Tint -30 +30 -30 +30 Sharp -30 +30 CLR Temp 5500 10500 Page 36 Gamma Position Page 37 IRIS Page 37 Lamp Setting Page 37 Advanced Page 37 Reset Page 39 Standard Natural Dynamic Movie1 Movie2 Memory - Sharp XV-Z20000 | XV-Z20000 Operation Manual - Page 34
Subtitle Page 42 -30 +30 Overscan Page 42 10 0% Reset Page 42 White Level -30 +30 Black Level -30 +30 Page 43 LED Page 43 Lamp Timer(Life) Page 43 OSD Display Page 43 When S-VIDEO or VIDEO is selected for the input mode Video System Page 43 When COMPONENT is selected for - Sharp XV-Z20000 | XV-Z20000 Operation Manual - Page 35
RETURN Menu Selections (Adjustments) • This operation can also be performed by using the buttons on the projector. (Example: Adjusting "Bright") 1 Press MENU. • The "Picture" menu screen for the selected input mode is displayed. 2 Press or to select the menu screen to adjust on the menu bar. Note - Sharp XV-Z20000 | XV-Z20000 Operation Manual - Page 36
(e.g. "Bright") will be displayed at the bottom of the screen. • When or is pressed, the next item will be displayed. (e.g. "Bright" is replaced with "Color" by pressing .) Singleadjustment items Note • Press RETURN to return to the previous screen. 4 Press or to adjust the item selected. • The - Sharp XV-Z20000 | XV-Z20000 Operation Manual - Page 37
Picture Mode CLR Temp BrilliantColor™ IRIS Lamp Setting sharpness. For making images slightly more reddish For making images slightly more bluish (slightly warmer colors). (slightly cooler colors). Note • To reset all adjustment items, select "Yes" in "Reset" and press ENTER. The Picture Mode - Sharp XV-Z20000 | XV-Z20000 Operation Manual - Page 38
mode between high contrast and high brightness. High contrast is given priority over high brightness. Note • You can also use IRIS on the remote control to change the Iris. (See page 29.) Lamp "Saturation" and "Value" of all colors are reset to the default setting. Adjusting "Hue", "Saturation", - Sharp XV-Z20000 | XV-Z20000 Operation Manual - Page 39
level. Selectable items On Off Description The BrilliantColorTM function is activated. The BrilliantColorTM function is not activated. Selecting the Progressive Mode For selecting the progressive display of a video signal. Selectable items 3D Fast 3D Slow 2D+ Description Useful to display fast - Sharp XV-Z20000 | XV-Z20000 Operation Manual - Page 40
items Off Level 1 Level 2 Level 3 Description The Automatic Contrast function is not activated. Sets the Automatic Contrast level. Resetting All Adjustment Items This function allows you to reset all adjustment items to the default setting. Selectable items Description No Does not do - Sharp XV-Z20000 | XV-Z20000 Operation Manual - Page 41
gamma curve to be adjusted. For more information on the special software, visit the Sharp website at: http://sharp-world.com/projector/. Note • The gamma position you set in this menu can be selected in the while viewing the effects on-screen. Note • To reset all adjustment items, select "Yes" in - Sharp XV-Z20000 | XV-Z20000 Operation Manual - Page 42
vertical stripes or flickering in portions of the screen. Selectable item Clock Phase H-Pos V-Pos Description Adjusts vertical reset all adjustment items, select "Yes" in "Reset projector. • When the optimum image cannot be achieved with Auto Sync adjustment, use manual adjustments. Special Modes - Sharp XV-Z20000 | XV-Z20000 Operation Manual - Page 43
when the input mode is HDMI input or DVI input with digital signals. Adjusting the Image Position You can move the projected image vertically. Note • When changing the screen with the Subtitle setting, not only the bottom of the screen rises, but also the upper part is changed to a certain - Sharp XV-Z20000 | XV-Z20000 Operation Manual - Page 44
the projection. Selectable items On Off Description LEDs are turned on. LEDs are turned off while the projector is in operation. (LEDs turn on while the projector is in the standby mode, warming up or indicating problems.) Note • When Auto Power Off function is set to "OFF", "LED" is set to "On - Sharp XV-Z20000 | XV-Z20000 Operation Manual - Page 45
None Description SHARP logo screen Blue screen - (Black screen) Adjusting the Economy Mode Setting the Economy mode: Select "Economy Mode" and so as to minimize the amount of power consumed when the projector is in Standby mode. Selectable items Description ON The RS-232C is operating at all - Sharp XV-Z20000 | XV-Z20000 Operation Manual - Page 46
"All Reset" to initialize all the adjustments you have made to the default settings. Note The following items cannot be initialized. • "Fine Sync" menu - Special Modes • "Options" menu - Lamp Timer (Life) - Language Other Function Selecting the On-screen Display Language The projector can switch - Sharp XV-Z20000 | XV-Z20000 Operation Manual - Page 47
is active. Red on The lamp does (Standby) not illuminate. Lamp replaceRed blinks ment time. • Burnt-out lamp • Lamp circuit failure • The remaining lamp life has become 5% or less. • Replace the lamp. (See page 48.) Take the projector to your nearest Sharp Authorized Service Center or Dealer for - Sharp XV-Z20000 | XV-Z20000 Operation Manual - Page 48
to power outage or some other cause while using the projector, and the power supply recovers immediately after that, the lamp indicator will illuminate in red and the lamp may not be lit. In this case, unplug the power cord from the AC outlet, replace the power cord in the AC outlet and then - Sharp XV-Z20000 | XV-Z20000 Operation Manual - Page 49
change the lamp by following the instructions described in this section. *If you wish, you may have the lamp replaced at your nearest Sharp Authorized Service Center or Dealer. * If the new lamp does not light after replacement, take your projector to the nearest Sharp Authorized Service Center or - Sharp XV-Z20000 | XV-Z20000 Operation Manual - Page 50
on the remote control to put the projector into the standby mode. • Wait until the cooling fan stops. Lamp unit (Type: AN-K20LP) STANDBY • Leave the lamp until it has fully cooled down (about 1 hour). 3 Remove the lamp unit cover. • Loosen the user service screws that secure the lamp unit cover. - Sharp XV-Z20000 | XV-Z20000 Operation Manual - Page 51
on, even if the power cord is connected to the projector. Securing screws 2 1 User service screws Resetting the Lamp Timer Reset the lamp timer after replacing the lamp. Info • Make sure to reset the lamp timer only when replacing the lamp. If you reset the lamp timer and continue to use the same - Sharp XV-Z20000 | XV-Z20000 Operation Manual - Page 52
C5 Ground • DVI Analog RGB Input Pin No. Signal 1 Not connected 2 Not connected 3 Not connected 4 Not connected 5 Not connected 6 DDC clock 7 DDC data 8 Vertical sync 9 Not connected 10 Not connected 11 Not connected 12 Not connected 13 Not connected 14 +5V power 15 Ground Pin No. Signal 16 Hot - Sharp XV-Z20000 | XV-Z20000 Operation Manual - Page 53
:Lamp Burnt-out, 32:Lamp Ignition Failure 0:Normal, 1:Temp High, 2:Fan Error, 4:Lamp Cover Open, 8:Lamp Life 5% or less, 16:Lamp Burnt-out, 32:Lamp Ignition Failure, 64:Temp Abnormally High T P O W _ _ _ 1 1:On, 2:Cooling 3:Shutting Down 0:Standby M N R D _ _ _ 1 XV-Z20000/DT-5000 - Sharp XV-Z20000 | XV-Z20000 Operation Manual - Page 54
ZOOM 14:9 SMART ZOOM NORMAL STRETCH SIDE BAR/DOTBYDOT SMART STRETCH CINEMA ZOOM ZOOM 14:9 SMART ZOOM High Brightness Medium Mode High Contrast Eco + Quiet Bright Picture Mode Contrast (-90 - +90) Bright (-90 - +90) Color (-30 - +30) Tint (-30 - +30) Sharp (-30 - +30) CLR Temp *1 BrilliantColorTM - Sharp XV-Z20000 | XV-Z20000 Operation Manual - Page 55
(-90 - +90) Bright (-90 - +90) Color (-30 - +30) Tint (-30 - +30) Sharp (-30 - +30) CLR Temp *1 BrilliantColorTM Gamma Position Progressive Film Mode DNR MNR Unveil Control Automatic Contrast Picture Reset Picture Mode Contrast (-90 - +90) Bright (-90 - +90) Color (-30 - +30) Tint (-30 - +30 - Sharp XV-Z20000 | XV-Z20000 Operation Manual - Page 56
90 - +90) Bright (-90 - +90) Color (-30 - +30) Tint (-30 - +30) Sharp (-30 - +30) CLR Temp *1 BrilliantColorTM Gamma Position Progressive Film Mode DNR MNR Unveil Control Automatic Contrast Picture Reset Picture Mode Contrast (-90 - +90) Bright (-90 - +90) Color (-30 - +30) Standard Natural Dynamic - Sharp XV-Z20000 | XV-Z20000 Operation Manual - Page 57
Contrast (-90 - +90) Bright (-90 - +90) Color (-30 - +30) Tint (-30 - +30) Sharp (-30 - +30) CLR Temp *1 BrilliantColorTM Gamma Position Progressive Film Mode DNR MNR Unveil Control Automatic Contrast Picture Reset All Colors-Gamma (-10 - +10) Red-Gamma (-30 - +30) Green-Gamma (-30 - +30) Blue - Sharp XV-Z20000 | XV-Z20000 Operation Manual - Page 58
Reset C.M.S. All Reset Clock (-150 - +150) Phase (-60 - +60) H-Pos (-150 - +150) V-Pos (-60 - +60) Fine Reset RGB Horizontal Frequency Check RGB Vertical Lamp Usage Time (Hour) Lamp I M B G _ _ _ 4 OK or ERR RETURN Standby mode (or 30-second startup time) ERR ERR ERR ERR ERR ERR ERR - Sharp XV-Z20000 | XV-Z20000 Operation Manual - Page 59
_ _ _ 1 XV-Z20000/DT-5000 P J N 0 _ _ _ 1 P J N 1 * * * * OK or ERR P J N 2 * * * * OK or ERR P J N 3 * * * * OK or ERR L P R E _ _ _ 1 ERR RETURN ERR ERR ERR ERR ERR ERR ERR ERR ERR ERR ERR ERR ERR ERR ERR ERR ERR ERR ERR ERR ERR ERR Standby mode (or 30 - Sharp XV-Z20000 | XV-Z20000 Operation Manual - Page 60
C1 C2 C3 C4 C5 C6 C7 C8 C9 C10 C11 C12 C13 C14 C15 RESIZE 1 0 1 1 00 1 1 1 10 1 0 1 0 PICTURE MODE 1 0 1 1 0 1 0 0 1 1 1 0 0 1 0 IRIS 1 0 1 1 00 1 0 1 01 0 1 1 0 AUTO SYNC " indicating "Front" and "01" indicating "Rear". Sharp remote control signal format Transmission format: 15-bit format - Sharp XV-Z20000 | XV-Z20000 Operation Manual - Page 61
, Vertical Frequency: 43-100 Hz, Pixel Clock: 12-150 MHz • Compatible with sync on green and composite sync signals (TTL level) • AICS (Advanced Intelligent Compression and Expansion System) resizing technology The following is a list of modes that conform to VESA. However, this projector supports - Sharp XV-Z20000 | XV-Z20000 Operation Manual - Page 62
Troubleshooting Problem No picture and no sound or projector does not start Color is faded or poor. Check • Projector power cord is not plugged into the wall outlet. • Power to the external connected devices is off. • The selected input mode projector illuminates. Power indicator and lamp - Sharp XV-Z20000 | XV-Z20000 Operation Manual - Page 63
- 46,49 • Cables incorrectly connected to the projector or the connected equipment works improperly. • If this happens frequently, replace the lamp. • The lamp will eventually need to be changed. While the remaining lamp life draws to a close, replace the lamp. • In the case of transmitting RS-232C - Sharp XV-Z20000 | XV-Z20000 Operation Manual - Page 64
Specifications Product type Projector Model XV-Z20000/DT-5000 Video system NTSC 3.58/NTSC 4.43/PAL/PAL-M/PAL-N/PAL 60/SECAM DTV480I/DTV480P/DTV720P/DTV1080I/DTV1080P Display method DLP® chip DLP® panel Panel size: 0.95" No. of dots: 2,073,600 dots (1,920 [H] × 1,080 [V]) Lens 1-1.35 × zoom lens, F2 - Sharp XV-Z20000 | XV-Z20000 Operation Manual - Page 65
Dimensions Units: inch (mm) 16 5/32 (410.2) 4 7/32 (107) 3 11 64/ (80.5) 9 5/32 (232.5) -64 3 1/8 (79.1) 6 17 64/ (158.9) 19 32/ (15) 6 51 64/ (172.5) 8 25/32 (223.1) 37/64 (14.4) 8 3/8 (212.5) 8 3/8 (212.5) 18 45/64 (475) M4 M4 M4 43/64 (16.9) 3 23/64 (85.1) 3 5/64 (77.9) 1 25 64/ (35 - Sharp XV-Z20000 | XV-Z20000 Operation Manual - Page 66
10 Remote control sensor 11 Replacing the lamp 48 RESIZE button 30 RETURN button 34 RGB/COMP. button 44 RS-232C 45 RS-232C Port 44 RS-232C terminal 24 Saturation 37 Sharp 36 SIDE BAR 30 Signal Info 41 Signal Type 44 SMART STRETCH 30 SMART ZOOM 31 Special Modes 41 STANDBY button 26 - Sharp XV-Z20000 | XV-Z20000 Operation Manual - Page 67
(In-Home Service) XV-Z20000 Projector Your Product Model Number & Description: (Be sure to have this information available when you need service for your Product.) Warranty Period for this Product: One (1) year parts and labor from date of purchase except for the Projector Lamp for which the - Sharp XV-Z20000 | XV-Z20000 Operation Manual - Page 68
negligence, strict liability or otherwise. XV-Z20000 Projector WARRANTY PERIODS 1 year (bulb 90 days) Appendix To obtain the name and address of the nearest Authorized Sharp Service Centre or Dealer, please contact: SHARP ELECTRONICS OF CANADA LTD. SHARP ELECTRONICS OF CANADA LTD. 335 Britannia - Sharp XV-Z20000 | XV-Z20000 Operation Manual - Page 69
SHARP CORPORATION Printed in China Imprimé en Chine Impreso en China Impresso na China TINS-C541WJZZ 06P07-CH-NM
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
 |
 |
XV-Z20000/
DT-5000
OPERATION MANUAL
MODE D’EMPLOI
MANUAL DE MANEJO
MANUAL DE OPERAÇÃO
PROJECTOR
PROJECTEUR
PROYECTOR
PROJETOR
ENGLISH
FRANÇAIS
ESPAÑOL
PORTUGUÊS