Sharp XV-Z200U XV-Z200U Operation Manual
Sharp XV-Z200U Manual
 |
UPC - 074000364028
View all Sharp XV-Z200U manuals
Add to My Manuals
Save this manual to your list of manuals |
Sharp XV-Z200U manual content summary:
- Sharp XV-Z200U | XV-Z200U Operation Manual - Page 1
PROJECTOR PROJECTEUR PROYECTOR PROJETOR XV-Z200U OPERATION MANUAL MODE D'EMPLOI MANUAL DE OPERACION MANUAL DE OPERAÇÃO ENGLISH 1 - -72 FRANÇAIS 1 - -71 ESPAÑOL 1 - -70 PORTUGUÊS ...... -1 - -70 - Sharp XV-Z200U | XV-Z200U Operation Manual - Page 2
page 12. Model No.: XV-Z200U Serial No.: There are two important reasons for prompt warranty registration of your new SHARP Projector, using the REGISTRATION CARD packed with the projector. 1. WARRANTY This is to assure that you immediately receive the full benefit of the parts, service and labor - Sharp XV-Z200U | XV-Z200U Operation Manual - Page 3
is connected. • Consult the dealer or an experienced radio/TV technician for help. U.S.A. ONLY Declaration of Conformity SHARP PROJECTOR, MODEL XV-Z200U This device complies with Part 15 of the FCC rules. Operation is subject to the following conditions: (1) This device may not cause harmful - Sharp XV-Z200U | XV-Z200U Operation Manual - Page 4
Indicators 58 Regarding the Lamp 59 Lamp 59 Caution Concerning the Lamp 59 Replacing the Lamp 59 Removing and Installing the Lamp Unit 60 Resetting the Lamp Timer 61 Cleaning the Ventilative Holes 62 Using the Kensington Lock 63 Troubleshooting 63 For SHARP Assistance (U.S.A. only 63 - Sharp XV-Z200U | XV-Z200U Operation Manual - Page 5
servicing. For your own protection and reliable usage of your Projector, please be sure to read these "IMPORTANT SAFEGUARDS" carefully before use. 1. Read Instructions All the safety and operating instructions into the outlet, contact your electrician to replace your obsolete outlet. Do not defeat - Sharp XV-Z200U | XV-Z200U Operation Manual - Page 6
has been dropped or damaged in any way. f. If the product exhibits a distinct change in performance. 19. Replacement Parts When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original - Sharp XV-Z200U | XV-Z200U Operation Manual - Page 7
your nearest Authorized SharpVision Service Center or Dealer for replacement. See "Replacing the Lamp" on page 59. CAUTION PRECAUCIÓN PRÉCAUTION BQC-XVZ200++1 Cautions concerning the setup of the projector I For minimal servicing and to maintain high image qual- ity, SHARP recommends that this - Sharp XV-Z200U | XV-Z200U Operation Manual - Page 8
Quick Guide In this page, connection of the projector and the video equipment is explained as an example for the procedure from setup to projection. Refer to each page for details. Required equipments Projector Remote control • Insert the batteries. (Page 11) Power cord Video equipment Video - Sharp XV-Z200U | XV-Z200U Operation Manual - Page 9
Part Names Numbers in refer to the main pages in this operation manual where the topic is explained. Projector (Front and Top View) Lens shift dial 25 Zoom knob 25 Exhaust ventilative hole 6 Focus ring 25 Remote control sensor 11 58 TEMPERATURE WARNING indicator 58 LAMP indicator 30 POWER - Sharp XV-Z200U | XV-Z200U Operation Manual - Page 10
D-sub) 14 AC socket INPUT 1 COMPONENT 17 terminals (RCA) INPUT 4 VIDEO terminal (RCA) 16 20 DIGITAL INPUT TYPE switch Using the Terminal Cover When the projector is used on a desktop, high mounted or ceiling mounted, attach the terminal cover (supplied) to hide the connecting cables. Attaching - Sharp XV-Z200U | XV-Z200U Operation Manual - Page 11
Part Names Remote Control (Front View) STANDBY button 32 KEYSTONE button 33 ENTER button 39 UNDO button 39 INPUT 1 button 31 INPUT 31 INPUT 3 button 31 DIGITAL INPUT button 35 RESIZE button 47 PICTURE SETTING button 35 FREEZE button Remote Control (Top View) Remote control signal transmitters -10 - Sharp XV-Z200U | XV-Z200U Operation Manual - Page 12
remote control may malfunction under a fluorescent lamp. Under that circumstance, move the projector away from the fluorescent lamp. 45˚ 30˚ Remote The batteries included with this projector may exhaust over a short period, depending on how they are kept. Be sure to replace them as soon as possible - Sharp XV-Z200U | XV-Z200U Operation Manual - Page 13
Remote control Two AA size batteries RRMCGA218WJSA Power cord QACCDA007WJPZ Terminal cover GCOVAA116WJKB Lens cap Screws for terminal cover Operation manual CCAPHA004WJ01 available depending on the region. Please check with your nearest Authorized SharpVision Service Center or Dealer. -12 - Sharp XV-Z200U | XV-Z200U Operation Manual - Page 14
Connections and Setup Connections and Setup - Sharp XV-Z200U | XV-Z200U Operation Manual - Page 15
on after all the connections are made. • Be sure to read the operation manuals of the devices to be connected before making connections. This projector can be connected to: Video equipment: I A VCR, DVD player or other video equipment (See page 15.) I A DVD player or DTV* decoder (See page 17.) *DTV - Sharp XV-Z200U | XV-Z200U Operation Manual - Page 16
can be connected to INPUT 3 input terminal. 1 Connect an S-video cable to the projector. 2 Connect the S-video cable to the video equipment. Note • The INPUT 3 (S-VIDEO) terminal uses a video signal system in which the picture is separated into color and luminance signals to realize a higher - Sharp XV-Z200U | XV-Z200U Operation Manual - Page 17
, DVD player or other video equipment can be connected to INPUT 4 input terminal. 1 Connect a composite video cable to the projector. 2 Connect the composite video cable to the video equipment. To INPUT 4 terminal Composite video cable (commercially available) To video output terminal VCR or other - Sharp XV-Z200U | XV-Z200U Operation Manual - Page 18
and DTV decoders to INPUT 1 terminals. 1 Connect a component cable to the projector. 2 Connect the above cable to the component video equipment. Note • Make sure to turn both the projector and the video equipment off before connecting. To INPUT 1 terminals Component cable (commercially available - Sharp XV-Z200U | XV-Z200U Operation Manual - Page 19
terminal of the DTV decoder, select "Component" for "Signal Type" on the OSD menu or press on the remote control. (See page 52.) • Make sure to turn both the projector and the video equipment off before connecting. Optional accessories To INPUT 2 terminal 3 RCA to 15-pin D-sub cable Type: AN-C3CP - Sharp XV-Z200U | XV-Z200U Operation Manual - Page 20
cable. 3 Connect the above cable to the video equipment. • Secure the connectors by tightening the thumbscrews. Note • When connecting this projector to DVI out- put of the DTV decoder, select "RGB" for "Signal Type" on the OSD menu or press on the remote control. (See page 52.) Optional accessory - Sharp XV-Z200U | XV-Z200U Operation Manual - Page 21
equipment with the digital output terminal. (See page 31.) • Make sure to turn both the projector and the video equipment off before switching the "DIGITAL INPUT TYPE" switch and connecting. Optional accessory DVI cable Type: AN-C3DV (9'10'' (3.0 m)) To DIGITAL INPUT terminal DIGITAL INPUT - Sharp XV-Z200U | XV-Z200U Operation Manual - Page 22
. • When connecting the projector to a computer in this way, select "RGB" for "Signal Type" on the OSD menu or press on the remote control. (See page 52.) • A Macintosh adaptor may be required for use with some Macintosh computers. Contact your nearest Authorized SharpVision Service Center or Dealer - Sharp XV-Z200U | XV-Z200U Operation Manual - Page 23
terminal of the computer. (See page 31.) • Before switching the "DIGITAL INPUT TYPE" switch and connecting, be sure to unplug the power cord of the projector from the AC outlet and turn off the computer to be connected. After making all connections, turn on the - Sharp XV-Z200U | XV-Z200U Operation Manual - Page 24
if your computer terminal is not correctly set up. Refer to the operation manual of the computer for details. • Refer to "Computer Compatibility Chart" on page 66 for a list of computer signals compatible with the projector. Use with computer signals other than those listed may cause some of the - Sharp XV-Z200U | XV-Z200U Operation Manual - Page 25
the projected image as you want by lifting up the projec- tor and rotating the projector on the Swivel Stand. Caution • Do not hold the lens when lifting, lowering or rotating the projector. • When lowering the projector, be careful not to get your fingers caught in the area between the Swivel - Sharp XV-Z200U | XV-Z200U Operation Manual - Page 26
and Setup Attaching the Swivel Stand 1 Align the tabs on the front bot- tom of the projector (1). 2 While holding down the button (2), place the projector onto the Swivel Stand (3) to attach. 3 Press the projector down firmly to attach it to the Swivel Stand to make sure it is securely attached to - Sharp XV-Z200U | XV-Z200U Operation Manual - Page 27
of Keystone correction and placement of projector using the correction. • Decide the placement of the projector referring to the figures on (e) 5' 11''(1.8m) Projection distance (b) Horizontal Placement range (d) Composite, S-video 480I/P, 1080I 720P RGB 28' 7'' (8.7m) 7' 7'' (2.3m) 8' 2'' (2. - Sharp XV-Z200U | XV-Z200U Operation Manual - Page 28
90° Lower edge of screen (White portion) = Standard (0) point Upper lens shift position (Desktop setup) Upper and Lower Lens Shift Position (Ceiling Mount) When the projector is in the inverted position, use the upper edge of the screen as the base line, and exchange the lower and upper lens shift - Sharp XV-Z200U | XV-Z200U Operation Manual - Page 29
use the optional Sharp ceiling-mount bracket for this installation. I Before mounting the projector, remove the Swivel Stand. (See pages 24 and 25 for removing and attaching the Swivel Stand.) I Before mounting the projector, contact your nearest Authorized SharpVision Service Center or - Sharp XV-Z200U | XV-Z200U Operation Manual - Page 30
Basic Operation Basic Operation - Sharp XV-Z200U | XV-Z200U Operation Manual - Page 31
to another language, reset the language according to the procedure on page 31. 1 Plug the power cord into the wall outlet. • The POWER indicator illuminates red, and the projector enters standby mode. 2 Press on the remote control or on the projector. • The blinking green LAMP indicator shows that - Sharp XV-Z200U | XV-Z200U Operation Manual - Page 32
3 Press , , , or on the remote control or on the projector to select the INPUT mode. • After pressing once on the projector, use to select the desired input mode. Note • When no signal is received, "NO SIGNAL" will be displayed. When a signal that the projector is not preset to receive is received, - Sharp XV-Z200U | XV-Z200U Operation Manual - Page 33
the Power off 1 Press on the remote con- trol or on the projector, then press or again while the confirmation message is displayed, to put the projec- tor into the standby mode. • A dimly-lit screen is displayed for a short time to reduce lamp damage. Note • If you accidentally pressed - Sharp XV-Z200U | XV-Z200U Operation Manual - Page 34
38 to 41. 1 Press on the projector or on the remote control. 2 Press / to select "H Key- stone" or "V Keystone". Selected Item Description H Keystone V Keystone Horizontally adjusts the keystone settings. Vertically adjusts the keystone settings. Reset - Sharp XV-Z200U | XV-Z200U Operation Manual - Page 35
projection angle using the Swivel Stand to properly project images onto the screen. (See page 24). 3 Align the edge of the screen closest to the projector with the test pattern by adjusting the zoom and the Swivel Stand. (See pages 24 and 25.) 4 Adjust the Keystone function so that the size - Sharp XV-Z200U | XV-Z200U Operation Manual - Page 36
Freezing a Moving Image You can instantly freeze a moving image with the remote control. 1 Press . • The projected image is frozen. 2 Press again to return to the moving image from the currently connected device. Adjusting the Picture Aspect Ratio - Sharp XV-Z200U | XV-Z200U Operation Manual - Page 37
- - CINEMA ZOOM 1024 ן576 1024 ן576 - - STRETCH 1024 ן576 1024 ן576 1024 ן576 1024 ן576 • "STRETCH" is fixed when 540P, 720P or 1080I signal is entered. • "SMART STRETCH" cannot be selected while input signal from a computer (VGA, SVGA or XGA) is entered. Input Signal SIDE BAR - Sharp XV-Z200U | XV-Z200U Operation Manual - Page 38
Adjustments and Settings Adjustments and Settings - Sharp XV-Z200U | XV-Z200U Operation Manual - Page 39
Using the Menu Screen The menu screens allow you to adjust the image and various projector settings. The menu can be operated to achieve two functions, adjustment and setting. (For adjusting the menu items, see pages 38 and 39. For setting - Sharp XV-Z200U | XV-Z200U Operation Manual - Page 40
2 Press \ or | to display the other menu screens. • The menu icon for the selected menu screen is highlighted. Menu icon Menu screen Picture Fine Sync Options Language PRJ Mode Note • The "Fine Sync" menu is not avail- able for INPUT 3 or 4. • For items on the menus, see the tree charts on - Sharp XV-Z200U | XV-Z200U Operation Manual - Page 41
Using the Menu Screen Menu Selections (Settings) 1 Press . • The menu screen is displayed. Note • The "Picture" menu screen for the selected input mode is displayed. ", ', \, | buttons UNDO button MENU button ENTER button ", ', \, | buttons UNDO button MENU button ENTER button 2 Press \ or | - Sharp XV-Z200U | XV-Z200U Operation Manual - Page 42
3 Press " or ' to select the item you want to set. Note • Press to return to the previous screen. • In some menus, select the icon us- ing " ". 4 Press |. • The sub menu is displayed. Select the item. 5 Press " or ' to select the set- ting of the item displayed in the sub menu. 6 Press . • The - Sharp XV-Z200U | XV-Z200U Operation Manual - Page 43
menu Picture ( ) Fine Sync ( ) Options ( ) Contrast Bright Color Tint Sharp Red Blue Reset CLR Temp מ30 ם30 מ30 ם30 מ30 ם30 מ30 ם30 מ30 H-Pos מ30 ם30 V-Pos מ30 ם30 Reset Special Modes Auto Sync [ON/OFF] Signal Info Lamp Timer (Life) OSD Display [ON/OFF] Signal - Sharp XV-Z200U | XV-Z200U Operation Manual - Page 44
Picture ( ) Contrast Bright Color Tint Sharp Red Blue Reset CLR Temp מ30 ם30 מ30 ם30 מ30 ם30 מ30 ם30 מ30 ם30 מ30 ם30 מ30 ם30 Gamma White Emphasis [ON/OFF] Picture Setting Options ( ) Lamp Timer (Life) OSD Display [ON/OFF] Video System Background [None/Blue] Eco Mode - Sharp XV-Z200U | XV-Z200U Operation Manual - Page 45
Adjusting the Picture You can adjust the projector's picture to your preferences with the following picture For stronger blue Note • "Color", "Tint" and "Sharp" do not appear for RGB input in INPUT 2 mode. • To reset all adjustment items, select "Reset" on the "Picture" menu screen and press . • - Sharp XV-Z200U | XV-Z200U Operation Manual - Page 46
Adjusting the Color Temperature This function allows for selecting the desired color temperature. With the lower value selected, the projected image becomes warmer, reddish and incandescent-like while with the higher value, the image becomes cooler, bluish and fluorescent-like. Select "CLR Temp" in - Sharp XV-Z200U | XV-Z200U Operation Manual - Page 47
Adjusting the Picture Gamma Correction Function Gamma is an image quality enhancement function. Four gamma settings are available to allow for differences in the brightness of the room. Select "Gamma" in the "Picture" menu on the menu screen. ➝For operating the menu screen, see pages 38 to 41. - Sharp XV-Z200U | XV-Z200U Operation Manual - Page 48
" on the "Picture" menu and the memory location where you have stored the settings. Note • This function can be operated using the on the projector or on the remote control, as well as the OSD menu screen. Each time or is pressed, the memory number changes as shown be- low. Memory 1 Memory - Sharp XV-Z200U | XV-Z200U Operation Manual - Page 49
be used in the Component mode. • Computer image adjustments can be made easily by pressing AUTO SYNC on the remote control. See page 50 for details. • To reset all adjustment items, select "Reset" on the "Fine Sync" menu screen and press . • The adjustable area of each item may be changed according - Sharp XV-Z200U | XV-Z200U Operation Manual - Page 50
(horizontal stripes). (Flickering may occur, making the image hard to see.) • When inputting DTV 1080I signal, select the corresponding type of signal. • When inputting 720P signal from the video equipment, select "720P". When inputting 1280 × 720 signal from the computer, select "HTPC". • "Special - Sharp XV-Z200U | XV-Z200U Operation Manual - Page 51
• When the optimum image cannot be achieved with Auto Sync adjustment, use manual adjustments. (See page 48.) • The Auto Sync adjustment may take some the projector. • "Auto Sync" cannot be used in the DIGITAL INPUT mode. • Auto Sync adjustment is also performed by pressing AUTO SYNC on the remote - Sharp XV-Z200U | XV-Z200U Operation Manual - Page 52
Approx. in Standard mode ( ) 3,000 hours 150 hours Note • It is recommended that the lamp be changed when the remaining lamp life becomes 5%. For lamp replacement, contact your nearest Authorized SharpVision Service Center or Dealer. • The table above indicates rough estimates in the case of using - Sharp XV-Z200U | XV-Z200U Operation Manual - Page 53
are received. Set when Component signals are received. Note • "RGB" or "Component" can be selected with on the remote control only in INPUT 2. Setting the Video Signal (VIDEO menu only) The video input system mode is preset to "Auto"; however, it can be changed to a specific system mode if the - Sharp XV-Z200U | XV-Z200U Operation Manual - Page 54
you to select the image displayed when no signal is being sent to the projector. Select "Background" in the "Options" menu on the menu screen. ) 100% 230 W 285 W Approx. 4,000 hours Approx. 3,000 hours Note • Although lamp life and noise are improved when "Eco Mode" is set to " " (Eco mode), - Sharp XV-Z200U | XV-Z200U Operation Manual - Page 55
"Auto Power Off" in the "Options" menu on the menu screen. ➝For operating the menu screen, see pages 38 to 41. Selected Item Description Projector automatically enters the standby mode after 15 minutes without an input signal. Automatic Power Shut-off disabled. Note • "Auto Power Off" is factory - Sharp XV-Z200U | XV-Z200U Operation Manual - Page 56
operating the menu screen, see pages 38 to 41. Selected Item Description (Opaque) The menu is displayed opaquely. The menu is displayed (Translucent) translucently. The part of the menu on the image becomes transparent. On-screen Display Adjustments and Settings -55 - Sharp XV-Z200U | XV-Z200U Operation Manual - Page 57
Reversing/Inverting Projected Images This projector is equipped with a reverse/invert image function that allows you to reverse or invert the and inverted image Note • This function is used for the reversed image and ceiling-mount setups. See page 28 for these setups. On-screen Display -56 - Sharp XV-Z200U | XV-Z200U Operation Manual - Page 58
Appendix Appendix - Sharp XV-Z200U | XV-Z200U Operation Manual - Page 59
Time to change the lamp. The lamp does not illuminate. • Remaining lamp life becomes 5% or less. • Carefully replace the lamp. (See page 59.) • Take the projector to your nearest Authorized SharpVision Service • Burnt-out lamp Center or Dealer for repair. • Lamp circuit failure • Please - Sharp XV-Z200U | XV-Z200U Operation Manual - Page 60
backed by a 90-day parts and labor limited warranty. All service of this projector under warranty, including lamp replacement, must be obtained through a Sharp Autho- rized Projector Dealer or Service Center. For the name of the nearest Authorized SharpVision Service Center or Dealer, please call - Sharp XV-Z200U | XV-Z200U Operation Manual - Page 61
Unit Caution • Be sure to remove the lamp unit by the handle. Do not touch the glass surface of the lamp unit or the inside of the projector. • To avoid injury to yourself and damage to the lamp, carefully follow the steps below. • Replace the lamp after turning off the power and unplugging the - Sharp XV-Z200U | XV-Z200U Operation Manual - Page 62
unit compartment. Fasten the securing screws. 7 Attach the lamp unit cover. • Slide the lamp unit cover in the direction of the arrow. • Fasten the user service screw. Resetting the Lamp Timer Reset the lamp timer after replacing the lamp. 1 Plug the power cord. • Confirm that the POWER indicator - Sharp XV-Z200U | XV-Z200U Operation Manual - Page 63
off with a vacuum cleaner. • The ventilative holes should be cleaned every 100 hours of use. Clean the ventilative holes more often when the projector is used in a dirty or smoky location. Side and Rear view Intake ventilative holes Swivel stand Bottom view Intake ventilative holes Cleaning the - Sharp XV-Z200U | XV-Z200U Operation Manual - Page 64
• Change the input signal type. (See page 52.) For SHARP Assistance (U.S.A. only) If you encounter any problems during setup or operation of this projector, first refer to the "Troubleshooting" section on this page. If this operation manual does not answer your question, please call toll free 1-877 - Sharp XV-Z200U | XV-Z200U Operation Manual - Page 65
Connecting Pin Assignments DVI-I (INPUT 2 / DIGITAL INPUT) port : 29 pin connector 9 ~ 16 1 2 7 8 17 24 18 23 • DVI Digital INPUT Pin No. Signal Pin No. Signal 1 T.M.D.S data 2- 16 Hot plug detection 2 T.M.D.S data 2+ 17 T.M.D.S data 0- 3 T.M.D.S data 2 shield 18 T.M.D.S data 0+ C1 - Sharp XV-Z200U | XV-Z200U Operation Manual - Page 66
Command 4-digit Response code format Normal response Parameter 4-digit Problem response (communication error or incorrect command) O K Projector OK BUTTONS & REMOTE CONTROL BUTTONS CONTROL CONTENTS POWER ON STANDBY INPUT 1 (COMPONENT 1) INPUT 2 (COMPONENT 2) INPUT 3 (S-VIDEO) INPUT 4 (VIDEO - Sharp XV-Z200U | XV-Z200U Operation Manual - Page 67
60.0 75 VESA Standard ✔ ✔ DVI Support Display Upscale ✔ ✔ ✔ ✔ ✔ ✔ Intelligent Compression ✔ ✔ ✔ ✔ ✔ Upscale Intelligent Compression Note • This projector may not be able to display images from display modes can be found in your notebook computer's operation manual. -66 - Sharp XV-Z200U | XV-Z200U Operation Manual - Page 68
Specifications Product type Projector Model XV-Z200U Video system PAL/PAL 60/PAL-M/PAL-N/SECAM/NTSC 3.58/NTSC 4.43 DTV 480I/480P/720P/1080I Display method DLP chip, RGB optical shutter method DLP panel Panel size: 0.6Љ Display method: Single Panel Digital Micromirror Device (DMD™) by Texas - Sharp XV-Z200U | XV-Z200U Operation Manual - Page 69
Dimensions Units: inches (mm) Rear View Side View Top View Side View 12 7/8 (327) (153.8) 4 5/8 (118) 9/ 1 6 6 Front View Bottom View -68 14 1/2 (368) - Sharp XV-Z200U | XV-Z200U Operation Manual - Page 70
DVI (Digital Visual Interface) Display digital interface that also supports analog interfaces. Gamma Image quality enhancement function that offers on the projector and computer. Stretch Mode that stretches the 4:3 image horizontally to display it on the wide screen. Sync on green Video signal mode - Sharp XV-Z200U | XV-Z200U Operation Manual - Page 71
Background 53 C Ceiling-mount 28 Ceiling+Rear 56 Kensington Lock 63 KEYSTONE button 33 L LAMP indicator 58 Lens shift 25 M MENU Remote control 10 Remote control sensor 11 Remote control signal transmitter 10 RESIZE button 35 RS-232C terminal 23 S STANDBY button 32 STRETCH 35 S-VIDEO - Sharp XV-Z200U | XV-Z200U Operation Manual - Page 72
Coverage (if any): Where to Obtain Service: What to do to Obtain Service: XV-Z200U Projector (Be sure to have this information available when you need service for your Product.) One (1) year parts and labor from date of purchase except for the Projector Lamp for which the warranty period is ninety - Sharp XV-Z200U | XV-Z200U Operation Manual - Page 73
on contract, negligence, strict liability or otherwise. Projector WARRANTY PERIODS 1 year (bulb 90 days) To obtain the name and address of the nearest Authorized Sharp Service Centre or Dealer, please contact: SHARP ELECTRONICS OF CANADA LTD. SHARP ELECTRONICS OF CANADA LTD. 335 Britannia Road
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
 |
 |
XV-Z200U
OPERATION MANUAL
MODE D’EMPLOI
MANUAL DE OPERACION
MANUAL DE OPERAÇÃO
XV
-
Z200U
PROJECTOR
PROJECTEUR
PROYECTOR
PROJETOR
ENGLISH
.............
-1 –
-72
FRANÇAIS
...........
-1 –
-71
ESPAÑOL
............
-1 –
-70
PORTUGUÊS
......
-1 –
-70