Sharp XV-Z30000 Operation Manual

Sharp XV-Z30000 Manual

Get Sharp XV-Z30000 PDF manuals and user guides View all Sharp XV-Z30000 manuals
Add to My Manuals
Save this manual to your list of manuals

Sharp XV-Z30000 manual content summary:

  • Sharp XV-Z30000 | Operation Manual - Page 1
    PROJECTOR MODEL XV-Z30000 OPERATION MANUAL Introduction Easy Start Setup Connections Basic Operation Useful Features Appendix
  • Sharp XV-Z30000 | Operation Manual - Page 2
    and Chinese. Carefully read through the operation instructions before operating the projector. Die mitgelieferte CD-ROM enthält de operação antes de operar o projetor. Authorized representative responsible for the European Union Community Market SHARP ELECTRONICS (Europe) GmbH Sonninstraße 3,
  • Sharp XV-Z30000 | Operation Manual - Page 3
    projector. CAUTION RISK OF ELECTRIC SHOCK. DO NOT REMOVE SCREWS EXCEPT SPECIFIED USER SERVICE SCREW. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER. NO USER-SERVICEABLE PARTS EXCEPT LAMP UNIT. REFER SERVICING TO QUALIFIED SERVICE and maintenance (servicing) instructions in the
  • Sharp XV-Z30000 | Operation Manual - Page 4
    the instructions described on pages 78 to 80. * If you wish, you may have the lamp replaced at your nearest Sharp Authorized Projector Dealer or Service Center. * If the new lamp does not light after replacement, take your projector to the nearest Sharp Authorized Projector Dealer or Service Center
  • Sharp XV-Z30000 | Operation Manual - Page 5
    Bright Color Tint Sharp Red Gain Green Gain Blue Gain CLR Temp IRIS1 (Manual) IRIS2 (Auto) Eco+Quiet Advanced Reset SEL./ADJ. RETURN projector. Note ....... Indicates additional information for setting up and operating the projector. For Future Reference Maintenance Troubleshooting
  • Sharp XV-Z30000 | Operation Manual - Page 6
    PDF Operation Manuals 11 Accessories 12 Part Names and Functions 13 Side View 13 Top View 13 Front View 13 Rear View (Terminals 14 Inserting the Batteries 16 Usable Range 17 Easy Start Easy Start 18 Setup and Projection 18 Setup Setting Up the Projector 20 Video MNR 48 Resetting All
  • Sharp XV-Z30000 | Operation Manual - Page 7
    Maintenance 75 Maintenance Indicators 76 Regarding the Lamp 78 Lamp 78 Caution Concerning the Lamp 78 Replacing the Lamp 78 Removing and Installing the Lamp Unit 79 Resetting the Lamp Timer 80 Compatibility Chart 81 Troubleshooting 83 For SHARP Assistance 86 Specifications 87 Dimensions
  • Sharp XV-Z30000 | Operation Manual - Page 8
    servicing. 1. Read Instructions All the safety and operating instructions should be read before the product is operated. 2. Retain Instructions The safety and operating instructions Any mounting of the product should follow the manufacturer's instructions, and should use a mounting accessory
  • Sharp XV-Z30000 | Operation Manual - Page 9
    way. f. When the product exhibits a distinct change in performance, this indicates a need for service. 19. Replacement Parts When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original
  • Sharp XV-Z30000 | Operation Manual - Page 10
    hazard of glass particles if lamp ruptures. In case of lamp rupture, contact your nearest Sharp Authorized Projector Dealer or Service Center for replacement. See "Regarding the Lamp" on page 78. Caution concerning the setup of the projector ■ For minimal servicing and to maintain high image
  • Sharp XV-Z30000 | Operation Manual - Page 11
    the operation manuals of the projector and the equipment to be connected for instructions on how to make the connections. Using the projector in other countries . If this state continues, the lamp will turn off, the cooling fan will run and then the projector will enter Standby mode. Refer to
  • Sharp XV-Z30000 | Operation Manual - Page 12
    , seek immediate medical attention. Do not disassemble ■ Do not disassemble or modify the 3D Glasses. Caution for lithium battery ■ Batteries must not be exposed to excessive heat such as direct sunlight or fire. ■ Replace only with the same or equivalent type of battery. The battery may explode if
  • Sharp XV-Z30000 | Operation Manual - Page 13
    Accessing the PDF Manuals For MANUAL Refer to the "SETUP MANUAL" contained on the supplied CD-ROM for details. Connecting Pin Assignments 2 RS-232C Specifications and Commands 4 Setting up the Projector Network Environment 8 Resetting the Lamp Timer of the Projector via LAN 13 Troubleshooting
  • Sharp XV-Z30000 | Operation Manual - Page 14
    with your projector depends on the region. Use the power cord that corresponds to the wall outlet in your country. • Operation manuals (this manual and CD-ROM ) Note • Codes in "< >" are Replacement parts codes. Optional accessories ■ Lamp unit ■ Ceiling-mount adaptor
  • Sharp XV-Z30000 | Operation Manual - Page 15
    manual where the topic is explained.  1234 56 7 8 9 10 11 12 13 14 15 16 17 Side View 1 STANDBY/ON button 28 For turning the power on and putting the projector 3D MENU screen. 10 RESIZE button 36 For switching the picture size (NORMAL, 16:9, etc.). Top View 11 Power indicator 76 12 Lamp
  • Sharp XV-Z30000 | Operation Manual - Page 16
    2 Component (YPB(CB)PR(CR)) terminals 23 Terminals for connecting video equipment with component output terminal. 3 HDMI terminals 23, 24 Terminals lens that supports the trigger function. 6 RS-232C terminal 26 Terminal for controlling the projector using a computer. 9 10 11 12 13 7 3D SYNCHRO
  • Sharp XV-Z30000 | Operation Manual - Page 17
    manual where the topic is explained. 1 2 3 4 5 6 15 7 16 8 17 9 18 10 19 11 20 12 21 13 14 22 1 ON button 28 For turning the power on. 2 STANDBY button 28 For putting the projector noise of the cooling fan and extending the lamp life. 22 3D MENU button 69, 70 For displaying the
  • Sharp XV-Z30000 | Operation Manual - Page 18
    , therefore ensure you wipe them first and then remove them using a cloth. • The batteries included with this projector may run down in a short period, depending on how they are kept. Be sure to replace them as soon as possible with new batteries. • Remove the batteries from the remote control if you
  • Sharp XV-Z30000 | Operation Manual - Page 19
    remote control • Ensure that you do not drop it or expose it to moisture or high temperature. • The remote control may malfunction under a fluorescent lamp. In this case, move the projector away from the fluorescent lamp. 30° 30° 33 n (10 m) Remote control signal transmitters Remote control 17
  • Sharp XV-Z30000 | Operation Manual - Page 20
    ). For details, see the page described below for each step. Setup and Projection In this section, connection of the projector and video equipment is explained using one example. 3, 8 STANDBY/ON button 6 ENTER button 6 R/P buttons, 7 INPUT buttons 6 O/Q buttons 6 KEYSTONE button 8 STANDBY button
  • Sharp XV-Z30000 | Operation Manual - Page 21
    • When the position of the lower left is set, the correction is made and the display disappears. BP. 31 7. Select the Input mode On the projector: Press INPUT R/P to display the INPUT list. Use INPUT R/P to select the input mode. INPUT list On-screen display (HDMI1) INPUT HDMI1 HDMI2 COMPUTER
  • Sharp XV-Z30000 | Operation Manual - Page 22
    Setting Up the Projector Video Setup If using this projector outside the U.S.A., please change setting to "0 IRE" in Video Setup. (See page 50.) Setting Up the Projector For optimal image quality, position the projector perpendicular to the screen with the projector's feet flat and level. Doing so
  • Sharp XV-Z30000 | Operation Manual - Page 23
    54 H2 (in) = 0 x / 2.54 W (in) = 0.51477 x / 2.54 When using a normal screen (4:3): In case of setting the 16:9 picture to the full horizontal width of the 4:3 screen Picture (Screen) size Diag. [x] Width Height Projection distance [L] Minimum [L1] Maximum [L2] Distance from the lens center
  • Sharp XV-Z30000 | Operation Manual - Page 24
    ) [Menu item ➞ "Ceiling + Rear"] aCeiling-Mount Setup It is recommended that you use the optional Sharp ceiling-mount adaptor and unit for this installation. Before mounting the projector, contact your nearest Sharp Authorized Projector Dealer or Service Center to obtain the recommended ceiling
  • Sharp XV-Z30000 | Operation Manual - Page 25
    more details of connection and cables, refer to the operation manual of the connecting equipment. • You may need other cables or connectors not listed below. Terminals on the Projector Connections Equipment Video equipment Terminal on connected equipment Cable HDMI cable (commercially available
  • Sharp XV-Z30000 | Operation Manual - Page 26
    with HDMI output terminal to the HDMI terminal on the projector For video connection, use a cable that conforms to HDMI standards. Using signal transmission may not work properly. (The HDMI specification does not support all connections to equipment that has digital output terminal using a DVIÙHDMI
  • Sharp XV-Z30000 | Operation Manual - Page 27
    "Compatibility Chart" for a list of computer signals compatible with the projector. Use with computer signals other than those listed may cause some simultaneously when using a SHARP notebook computer). Refer to the specific instructions in your computer's operation manual to enable your computer's
  • Sharp XV-Z30000 | Operation Manual - Page 28
    cross type, commercially available), the computer can be used to control the projector and check the status of the projector. Refer to the "SETUP MANUAL" contained on the supplied CD-ROM for "RS-232C Specifications and Commands". When connecting to a computer using an RS-232C serial control cable To
  • Sharp XV-Z30000 | Operation Manual - Page 29
    -over Category 5 (CAT.5) type cable (commercially available). Connecting the Power Cord Plug the supplied power cord into the AC socket on the rear of the projector. Then plug into AC outlet. AC socket Power cord (supplied) To AC outlet 27
  • Sharp XV-Z30000 | Operation Manual - Page 30
    . Note • About the Lamp Indicator The lamp indicator illuminates to indicate the status of the lamp. Green: The lamp is on. Blinking in green: The lamp is warming up. Red: The lamp is shut down abnormally or the lamp should be replaced. • When switching on the projector, a slight flickering of
  • Sharp XV-Z30000 | Operation Manual - Page 31
    END LENS SHIFT TESTPATTERN LENS CENTER 1V 2 Press P, R, O or Q on the projector or the remote control to adjust the image position. Note • When RETURN is pressed, the lens shift reset screen is displayed. Lens shift can be reset to factory default with this screen. 0.5V 0.2H 1H V: Height of
  • Sharp XV-Z30000 | Operation Manual - Page 32
    to adjust the focus. ROn-screen display FOCUS TESTPATTERN ZOOM buttons FOCUS buttons Info • It is recommended that the focus be adjusted after the projector has warmed up for at least 30 minutes. Adjusting the Projected Image Size Press ZOOM +/- on the remote control to adjust the projected image
  • Sharp XV-Z30000 | Operation Manual - Page 33
    ADJUSTMENT H&V KEYSTONE SPHERE SEL. ENTER END 2 Press P/R to select the desired Keystone mode, and then press ENTER. • The menu guide appears. 3 Press P/R/O/Q to adjust the Keystone Correction. ENTER button Adjustment buttons (P/R/O/Q) RETURN button KEYSTONE button RETURN button ENTER button
  • Sharp XV-Z30000 | Operation Manual - Page 34
    ADJUSTMENT", and then press ENTER. ROn-screen display GEOMETRIC ADJUSTMENT END ADJUST NEXT RESET 3 Press P, R, O or Q to move the position for the upper left of the image. • At this time, pressing RETURN on the projector or on the remote control returns to the previous screen. • When
  • Sharp XV-Z30000 | Operation Manual - Page 35
    (See page 31.) 2 Press P/R to select "H&V KEYSTONE", and then press ENTER. ROn-screen display H&V KEYSTONE END EXIT TEST PTRN H:0 V:0 ADJUST RESET 3 Press P or R to parallelize the left and right sides of the projected image. Vertical Keystone Correction (Adjustment with ' / ") 4 Press O or
  • Sharp XV-Z30000 | Operation Manual - Page 36
    appears. (See page 31.) 2 Press P/R to select "SPHERE", and then press ENTER. ROn-screen display SPHERE END TESTPATTERN 0 ADJUST RESET 3 Press P/R/O/Q to adjust the sphere correction. Concave Distortion Correction (Adjustment with P/Q) 4 Press KEYSTONE to set the position. Convex Distortion
  • Sharp XV-Z30000 | Operation Manual - Page 37
    the input mode. ■ When you select the input mode with INPUT R/P on the projector: • When R/P is pressed, the INPUT list appears. While the INPUT list is YPbPr 1080P • When is displayed, "3D" is set to "On". • If is displayed, it means that a 3D image signal that can be automatically detected
  • Sharp XV-Z30000 | Operation Manual - Page 38
    Press RESIZE on the remote control or on the projector. • See page 51 for setting on menu full-screen. CINEMA ZOOM A CinemaScope image or an image with a 16:9 aspect ratio is displayed at full- size with a different aspect ratio to a TV program or video image, the image will look different from
  • Sharp XV-Z30000 | Operation Manual - Page 39
    can select the appropriate Picture mode for the projected image, such as movie or video game. 1 Press PICTURE MODE to display the Picture Mode list. Adjustment buttons (P/R) select a picture mode when projecting images in 3D mode. • See page 44 for details on the Picture mode. Useful Features 37
  • Sharp XV-Z30000 | Operation Manual - Page 40
    function works when detecting input signal after the projector turns on. When the menu screen is is useful when, for example, checking the video adjustment information. Switching the Eco+Quiet Mode lamp life will extend. Note • Refer to "Eco+Quiet" on page 45 for details. Press AUTO SYNC to manually
  • Sharp XV-Z30000 | Operation Manual - Page 41
    (Manual) Page 45 IRIS2(Auto) [On/Off] Page 45 Eco+Quiet [On/Off] Page 45 Advanced Page 45 Reset Page 48 Sub menu in 2D mode Standard Movie1, 2 Monochrome Anime Sports Stage Dynamic User1, 2 Game in 3D mode Standard(3D) Movie1, 2(3D) Monochrome(3D) Anime(3D) Sports(3D) Stage(3D) Dynamic(3D) User1
  • Sharp XV-Z30000 | Operation Manual - Page 42
    menu SIG-ADJ Page 49 Clock -150 +150 Phase -30 +30 H-Pos -150 +150 V-Pos -60 +60 Reset Page 49 Resolution Page 49 Auto Sync [On/Off] Page 49 Signal Type Page 50 Video Setup Page 50 Dynamic Range Page 50 Signal Info Page 50 Sub menu Auto RGB YPbPr 0 IRE 7.5 IRE
  • Sharp XV-Z30000 | Operation Manual - Page 43
    Memory Menu Page 56 All Reset Page 57 Lamp Timer (Life) Page 57 Sub Reset Network Setting Page 59 Restart Network Page 59 IP Address Page 60 MAC Address Page 60 Projector Page 60 Sub menu IP Address Subnet Mask Gateway "3D MENU" Main menu 3D MENU Page 70 3D [On/Off] Page 70 3D Format Page 70 3D
  • Sharp XV-Z30000 | Operation Manual - Page 44
    • This operation can also be performed by using the buttons on the projector. 1 Press MENU. • The "Picture" menu screen for the selected Contrast Bright Color Tint Sharp Red Gain Green Gain Blue Gain CLR Temp IRIS1 (Manual) IRIS2 (Auto) Eco+Quiet Advanced Reset SEL./ADJ. RETURN SCR
  • Sharp XV-Z30000 | Operation Manual - Page 45
    The item displayed by itself Bright 0 Picture SIG Picture Mode Contrast Bright Color Tint Sharp Red Gain Green Gain Blue Gain CLR Temp IRIS1 (Manual) IRIS2 (Auto) Eco+Quiet Advanced Reset SEL./ADJ. RETURN SCR 0 15 0 0 0 0 0 0 0 PRJ Net. Standard High Brightness On Off ENTER
  • Sharp XV-Z30000 | Operation Manual - Page 46
    Contrast Bright Color Tint Sharp Red Gain Green Gain Blue Gain CLR Temp IRIS1 (Manual) IRIS2 (Auto) Eco+Quiet Advanced Reset SEL./ADJ. RETURN SCR . Note • You can also select a picture mode when projecting images in 3D mode. • You can also press PICTURE MODE on the remote control to
  • Sharp XV-Z30000 | Operation Manual - Page 47
    greenish. Sharp For less sharpness. For more sharpness. Red ■ IRIS1 (Manual) Selectable items Description to "On", the power consumption will decrease and the lamp life will extend. • You can also use ECO+ "Picture" menu. Correcting Gradation of Video (Gamma Correction) When the darker areas
  • Sharp XV-Z30000 | Operation Manual - Page 48
    brightness. 1 Press P/R to select "Custom Gamma" on the gamma apdrejussstQme. nt screen, and then Custom Gamma Custom Gamma Off Custom Gamma Edit Reset Return Menu operation n Page 42 5 Press ENTER to display the confirmation screen. Use P/R to select "Save" and press ENTER. 6 To complete
  • Sharp XV-Z30000 | Operation Manual - Page 49
    there is data for the stored corrected color, the C.M.S. color adjustment screen is displayed. (Go to step 3.) C.M.S.1 Select Color Hue Saturation Value Effect C.M.S.1 Reset Return 0 0 0 0 On SEL./ADJ. RETURN ENTER END 2 Use the picker and select the color of the projected image to correct. The
  • Sharp XV-Z30000 | Operation Manual - Page 50
    When the contours and colors of moving images drag. - When TV broadcasts with weak signals are projected. • This function is available /576P H Reducing Image Noise (DNR) Video digital noise reduction (DNR) provides high quality Resetting All Adjustment Items To reset all adjustment items to the
  • Sharp XV-Z30000 | Operation Manual - Page 51
    0 V-Pos 0 Reset Resolution Auto Sync On Signal Type Auto Video Setup * Dynamic Range . • To reset all adjustment items, select "Reset" and press adjustment will occur when the projector is turned on or projector. • When the optimum image cannot be achieved with Auto Sync adjustment, use
  • Sharp XV-Z30000 | Operation Manual - Page 52
    signals are received. YPbPr Set when YPbPr signals are received. 5 Setting the Video Setup Selectable items 0 IRE 7.5 IRE Description Sets the black level to 0 be displayed if an HDMI-capable device's output signal type and the projector's input signal type do not match. If this should occur,
  • Sharp XV-Z30000 | Operation Manual - Page 53
    trigger-supported screen while linked with the power of the main unit. The screen extends and retracts automatically when the power of the projector is Picture mode - the input signal resolution - the input 3D signal type Note • RESIZE does not function when "Anamorphic" is set to "2.35
  • Sharp XV-Z30000 | Operation Manual - Page 54
    On The CBNR function is activated. Off The CBNR function is not activated. Note • When "3D" is set to "On", the CBNR function is disabled. • When "CBNR" is set to Selecting the Background Image Selectable items Logo Blue None Description SHARP logo screen Blue screen - (Black screen) 52
  • Sharp XV-Z30000 | Operation Manual - Page 55
    + Rear Description Normal image (Projected from the front of the screen) Inverted image (Projected from the front of the screen with an inverted projector) Reversed image (Projected from the rear of the screen or with a mirror) Reversed and inverted image (Projected with a mirror) See page 22 for
  • Sharp XV-Z30000 | Operation Manual - Page 56
    Off Demo Mode Off Fan Mode Normal Memory Menu All Reset Lamp Timer (Life) Xh XX min ( XX% ) SEL./ADJ. RETURN ENTER END Menu operation n Page 42 Setting No Operation Off Mode This function automatically switches the projector to Standby mode if there is no operation. Selectable items
  • Sharp XV-Z30000 | Operation Manual - Page 57
    lamp is warming up (See page 76.) ■ Setting the System Standby Function (System Standby) When you turn off the projector, the HDMIcompliant video equipment connected to the projector setting, select "Reset" and then press ENTER. Note • When connecting the projector to a Sharp Video Product with an
  • Sharp XV-Z30000 | Operation Manual - Page 58
    the projection. Selectable items On Off Description LEDs are turned on. LEDs are turned off while the projector is in operation. (LEDs turn on while the projector is in the Standby mode, warming up or indicating problems.) Note • When Auto Power Off function is set to "Off", "LED" is set to "On
  • Sharp XV-Z30000 | Operation Manual - Page 59
    to "Off" 2,000 hours 100 hours Note • It is recommended that the lamp be changed when the remaining lamp life becomes 5%. • The lamp life may vary depending on the usage condition. Returning to the Default Settings Use "All Reset" to initialize all the adjustments you have made to the default
  • Sharp XV-Z30000 | Operation Manual - Page 60
    Setting Up the Projector Network Environment ("Network" Menu) Pict. SIG SCR  Password  DHCP Client  TCP/IP  Reset Network Setting  Restart Network PRJ Disable Off Network Menu operation n Page 42 a Changing the Password 1 Select "Password", then press Q. • The screen for entering
  • Sharp XV-Z30000 | Operation Manual - Page 61
    Setting Connect the LAN cable before turning the projector on. If not, the DHCP Client function does not work. Selectable items On Off Description Obtains configuration parameters for TCP/IP network automatically. Sets the TCP/IP manually. Select "On" for "DHCP Client". "Obtaining IP Address
  • Sharp XV-Z30000 | Operation Manual - Page 62
    items Description IP Address The IP address of the projector is displayed. MAC Address The MAC address of the projector is displayed. Projector The projector name is displayed. Note • For information on how to change the projector name, see "SETUP MANUAL" contained in the supplied CD-ROM. 60
  • Sharp XV-Z30000 | Operation Manual - Page 63
    carefully. You can use special 3D Glasses to watch 3D-supported images on this projector. ■ You can enjoy 3D images by viewing the video images through the 3D Glasses supplied with the projector or through optional 3D glasses sold separately. ■ To produce 3D images, liquid crystal shutters in
  • Sharp XV-Z30000 | Operation Manual - Page 64
    : - nausea - queasiness/dizziness - headache - blurry vision or double vision that lasts longer than few seconds Do not engage in video for your left and right eyes. (For details on using "Invert", see page 70.) ■ A picture simultaneously projected from more than two projectors may not appear 3D
  • Sharp XV-Z30000 | Operation Manual - Page 65
    of light. IF YOU OR ANY MEMBER OF YOUR FAMILY HAS A HISTORY OF EPILEPSY The following people should consult a physician before viewing stereoscopic 3D images. - Anyone with a history of epilepsy, or who has a family member with a history of epilepsy - Children under 6 years of age - Anyone who has
  • Sharp XV-Z30000 | Operation Manual - Page 66
    This terminal is for service use only. Please do not connect any other device to this terminal. 4 Infrared receiver Receives an infrared signal sent from the IR emitter. The 3D Glasses turn off automatically after 3 minutes if no signal is received. 5 5 Nose pad mount 66 1 Power button The
  • Sharp XV-Z30000 | Operation Manual - Page 67
    Before Using the 3D Glasses Before using the 3D Glasses for the first time, remove the insulating taking care not to get the screwdriver caught on the metal latch. Replacing the Button Cell Battery The battery has an expected service life of approximately 75 hours. • When the battery power is low,
  • Sharp XV-Z30000 | Operation Manual - Page 68
    people wanting to watch in 2D. Viewing 2D images • When you press the power button twice while viewing 3D images, the LED light blinks 2 times and the 3D images switch to 2D images. Viewing 3D images • When you press the power button twice while viewing 2D images, the LED light blinks 3 times and
  • Sharp XV-Z30000 | Operation Manual - Page 69
    installation. Caution Wall or ceiling mount setup • Request your authorized dealer or installation service provider to install the IR emitter to the unit. 3 Connect the IR emitter and the projector. 4 Position the IR emitter. • 3D images are intended to be viewed while facing the screen from
  • Sharp XV-Z30000 | Operation Manual - Page 70
    ENTER button Note • The screen may temporarily become black when the projector is trying to detect a 3D image signal and when switching from 3D to 2D mode. 3D MENU button 3D ON/OFF button Viewing 3D Images Receiving a 3D Image Signal That Can Be Detected Automatically The image signal may contain
  • Sharp XV-Z30000 | Operation Manual - Page 71
    Menu" on page 71 for supported 3D signals and formats. • If you select "Off", the video source will be displayed with no conversion. 4 Press P/R to select "3D Format", and then press ENTER. Ending 3D Image Viewing 1 Press 3D ON/OFF during the 3D mode. 2 Take off the 3D Glasses and turn off the
  • Sharp XV-Z30000 | Operation Manual - Page 72
    signal is not detected: - If you selected "On", select the format with "3D Format". - If you select "Off", the video source will be displayed with no conversion. 3D Format You can set the 3D format manually for when a 3D signal that cannot be detected automatically is received. Selectable items
  • Sharp XV-Z30000 | Operation Manual - Page 73
    1080P 1080P 1080P 720P 720P 1080I 1080I 1080P 1080P 1080P 720P 720P 1080I 1080I 1080P 1080P 1080P 720P 720P 1080I 1080I 1080P 1080P 1080P When "3D" is ON Support When "3D" is OFF Auto 3D Format Side By Side Top And Bottom 50Hz ✔ 60Hz ✔ Displays Displays image for left correct
  • Sharp XV-Z30000 | Operation Manual - Page 74
    Image Viewing (Continued) Note • These 3D Glasses can only be used with Sharp 3D-compatible LCD TVs or projectors that use infrared control technology. 3D Glasses lenses • Do not apply pressure to the lenses of the 3D Glasses. Also, do not drop or bend the 3D Glasses. • Do not scratch the surface of
  • Sharp XV-Z30000 | Operation Manual - Page 75
    (including the lithium button battery) 50°F to 104°F (+10°C to +40°C) (The 3D Glasses cannot operate fully at extreme high or low temperatures. Please use them within the specifi range.) The product serial number is displayed on the 3D Glasses as indicated in the illustration on the left.
  • Sharp XV-Z30000 | Operation Manual - Page 76
    may prevent the remote control of the projector from functioning properly. • The IR emitter may interfere with other infrared communication equipment. • Interference from other infrared communication equipment may prevent you from viewing 3D images correctly. • 3D images are intended to be viewed
  • Sharp XV-Z30000 | Operation Manual - Page 77
    not use volatile agents such as insecticides on the projector. Do not attach rubber or plastic items to the projector for long periods. The effects of some of the in the plastic may cause damage to the quality or finish of the projector. ■ Wipe off dirt gently with a soft flannel cloth. Using a
  • Sharp XV-Z30000 | Operation Manual - Page 78
    indicator will illuminate in red. ■ If you try to turn on the projector a fourth time without replacing the lamp, the projector will not turn on. Indicators on the Projector Power indicator Red on Normal (Standby) Green on Normal (Power on) Red blinks Abnormal (See page 77.) Green blinks
  • Sharp XV-Z30000 | Operation Manual - Page 79
    the AC outlet, and then connect it again. • Remaining lamp life • Carefully replace the lamp. becomes 5% or less. (See page 78.) • Burnt-out lamp • Lamp circuit failure • Take the projector to your nearest Sharp Authorized Projector Dealer or Service Center (see page 86) for repair. • Please
  • Sharp XV-Z30000 | Operation Manual - Page 80
    the instructions described in this section. * If you wish, you may have the lamp replaced at your nearest Sharp Authorized Projector Dealer or Service Center. * If the new lamp does not light after replacement, take your projector to the nearest Sharp Authorized Projector Dealer or Service Center
  • Sharp XV-Z30000 | Operation Manual - Page 81
    control to put the projector into Standby mode. 2 Disconnect the power cord. • Unplug the power cord from the AC socket. • Leave the lamp until it has fully cooled down (about 1 hour). 3 Remove the lamp unit cover. • Loosen the user service screw (1) that secures the lamp unit cover. Remove the
  • Sharp XV-Z30000 | Operation Manual - Page 82
    the user service screw (3) to secure the lamp unit cover. Info • If the lamp unit and lamp unit cover are not correctly installed, the power will not turn on, even if the power cord is connected to the projector. Resetting the Lamp Timer Reset the lamp timer after replacing the lamp. Info • Make
  • Sharp XV-Z30000 | Operation Manual - Page 83
    60 60 60 60 60 60 60 67 75 75 75 Analog Support ✔ Digital Support Display ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ Upscale ✔ ✔ . *2 Full image display when "Resolution" is set to "1920 × 1080" Note • This projector may not be found in your notebook computer's operation manual. • When "Screen resolution" of the
  • Sharp XV-Z30000 | Operation Manual - Page 84
    1080P 1080P Horizontal Frequency (kHz) 28.1 33.8 27.0 28.1 33.8 56.3 67.5 Vertical Frequency (Hz) 50 60 24 25 30 50 60 Analog Support ✔ ✔ ✔ ✔ Digital Support 3D Format Frame Packing Side By Side Top And Bottom Signal 720P 720P 1080P 720P 720P 1080I 1080I 1080P 1080P 720P 720P 1080P 1080P
  • Sharp XV-Z30000 | Operation Manual - Page 85
    Troubleshooting Problem No picture or projector does not start. Check x Projector power cord is not plugged into the wall outlet. x Power to the external connected devices is off. x The selected input mode is wrong. x Cables are incorrectly connected to the projector. x Remote control battery has
  • Sharp XV-Z30000 | Operation Manual - Page 86
    will eventually need to be changed. While the remaining lamp life draws to a close, replace the lamp. x Non-Sharp Video Products are connected. One Touch Play function may not work when the projector is connected to non-Sharp Video Products. x An HDMI cable is not used for connection between the
  • Sharp XV-Z30000 | Operation Manual - Page 87
    . 70 age) occurs without the image appearing in 3D. x A signal that does not support 3D is being received. Check whether 82 a signal that supports 3D is being received. x If the projector is connected to a computer for 3D image playback, - check that a stereoscopically-enabled application is
  • Sharp XV-Z30000 | Operation Manual - Page 88
    If you encounter any problems during setup or operation of this projector, first refer to the "Troubleshooting" section on pages 83 to 85. If this operation manual does not answer your question, please contact the SHARP Service departments listed below. U.S.A. Sharp Electronics Corporation 1-888-GO
  • Sharp XV-Z30000 | Operation Manual - Page 89
    body only) [W × H × D] Weight (approx.) XV-Z30000 0.65" DLP® Chip ×1 1080P (1920 × 1080) F 2.5 - projector uses a DLP® chip. This very sophisticated panel contains 2,073,600 pixels (micromirrors). As with any high technology electronic equipment such as large screen TVs, video systems and video
  • Sharp XV-Z30000 | Operation Manual - Page 90
    88 Dimensions Units: inches (mm) 1 1/2 (38) 13 5/16 (338) 6 21/64 (160.5) 3 1/2 (89) 2 59/64 2 25/64 (74) (60.5) 16 (406.5) 7 63/64 (202.5) 2 9/64 (54) M4 M4 1 5/8 (41.25) 15 61/64 (405) M4 M4 3 3/4 (95) 7 31/64 (190) 11 63/64 (304) ø68 M4 M4 M4 M4 2 61/64 (75) 4 11/32 (110)
  • Sharp XV-Z30000 | Operation Manual - Page 91
    PRJ mode 22, 53 Remote control 15 Remote control sensors 17 Replacing the lamp 78 Reset Network Setting 59 RESIZE button 36 Restart Network 59 RETURN button 42 RS-232C terminal 26 SCR-ADJ 51 Screen Size and Projection Distance 21 Sharp 45 SIG-ADJ 49 Signal Info 50 Signal Type 50 SMART
  • Sharp XV-Z30000 | Operation Manual - Page 92
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
Introduction
Easy Start
Setup
Connections
Basic
Operation
Useful
Features
Appendix
OPERATION MANUAL
PROJECTOR
MODEL
XV-Z30000