Smeg OTR111SU Instruction Manual 1

Smeg OTR111SU Manual

Get Smeg OTR111SU PDF manuals and user guides View all Smeg OTR111SU manuals
Add to My Manuals
Save this manual to your list of manuals

Smeg OTR111SU manual content summary:

  • Smeg OTR111SU | Instruction Manual 1 - Page 1
    Over the Range Convection Microwave Oven Installation Instructions Model: OTR111SU TINSEB399WRRZ
  • Smeg OTR111SU | Instruction Manual 1 - Page 2
    is installed. See 3 ELECTRICAL GROUNDING INSTRUCTIONS on page 3. 1. MOUNTING SPACE Oven/Hood is installed. For proper installation and servicing, a 2-inch space is necessary between the top lath. The mounting sur- faces must be capable of supporting weight of 110 pounds-the oven and contents-AND the
  • Smeg OTR111SU | Instruction Manual 1 - Page 3
    inside the cabinet directly above the Microwave Oven/Hood mounting location. Note: 1. If you have any questions about the grounding or electrical instructions, consult a qualified electrician or serviceperson. 2. Neither SMEG nor the dealer can accept any liability for damage to the oven or personal
  • Smeg OTR111SU | Instruction Manual 1 - Page 4
    dents inside the cavity or on the door. If there is any damage, do not operate the oven and contact your dealer or SMEG AUTHORIZED SERVICER. 3. Place carton upside down as shown in Figure 6-1. 4. Using cutting line around the carton, cut into two pieces (A) and (BC). See Figure 6-2. 5. Cut the
  • Smeg OTR111SU | Instruction Manual 1 - Page 5
    6. Rest the oven on its side as shown in Figure 7. Place portion (C) of the carton underneath to protect the outercase from being damaged. 7. Remove the two screws which secure the mounting plate to the rear side of the oven. Remove the mounting plate. The two screws can be discarded. Note: If the
  • Smeg OTR111SU | Instruction Manual 1 - Page 6
    5. Replace the fan cover bracket. Make sure the fan blades are visible through the rear openings in oven before proceeding. Attach the fan cover bracket to the unit with the 4 screws removed in step 1 above. See Figure 11. The hood fan is now rotated for horizontal exhaust operation. 2. Lift the
  • Smeg OTR111SU | Instruction Manual 1 - Page 7
    . The Hood Fan Unit is now rotated for vertical exhaust operation. Template) and put the Toggle Nuts onto the Toggle Bolts. Figure 18. Refer to instructions in Wall Template. Wire box Figure 16 6. Attach the Exhaust Damper Assembly to the fan cover on the top of the outercase cabinet by sliding
  • Smeg OTR111SU | Instruction Manual 1 - Page 8
    MOUNTING OVEN TO THE WALL Two people are recommended to attach the Microwave Oven/Hood to the Mounting Plate. 1. Place cut portion of carton (B) on top surface of range. Protection of the range cooking surface is recommended. A protective drop cloth may also be used to cover the top of the range. 2.
  • Smeg OTR111SU | Instruction Manual 1 - Page 9
    unit has been installed according to all of the Installation Instructions, the Top Template and Wall Template. 2. Remove all packing material from the oven. 3. Plug in the power cord. 4. Read the Instruction Manual. 5. Keep the Installation Instructions for the local electrical inspector's use. 9
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
Over the Range Convection Microwave Oven
Installation Instructions
Model: OTR111SU
TINSEB399WRRZ