Sony ICD-BM1VTP2 Note on using optional AC adapter
Sony ICD-BM1VTP2 - Icdbm1 With Voice Manual
 |
View all Sony ICD-BM1VTP2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Sony ICD-BM1VTP2 manual content summary:
- Sony ICD-BM1VTP2 | Note on using optional AC adapter - Page 1
ICD-BM1/BM1PRO For the customers using the optional AC power adaptor The optional AC power adaptor is supplied with a clamp jack. Wind the cable one and a half times. 3 Close the clamp filter. Make sure the clasps are fully engaged. © 2003 Sony Corporation Printed in Japan 3-265-551-11(1)
-
1
 |
 |
© 2003
Sony Corporation
Printed in Japan
3-265-551-
11
(1)
For the customers using the optional AC
power adaptor
The optional AC power adaptor is supplied with a clamp filter.
When using the optional AC adaptor, make sure to attach the
supplied clamp filter to the cable following the procedures below.
(You must affix the ferrite cores to comply with the applicable
standards.)
1
Open the clamp filter.
2
Wind the cable into the clamp filter as show below.
Attach the clamp
filter on one end of
the cable.
3
Close the clamp filter.
As close to the
plug as possible
that is connected
to DC IN jack.
Wind the cable
one and a half
times.
Make sure the
clasps are fully
engaged.
ICD-BM1/BM1PRO