Sony KDL-46HX820 Additional Information for Using Sony® Wall-Mount Bra
Sony KDL-46HX820 Manual
UPC - 027242816749
View all Sony KDL-46HX820 manuals
Add to My Manuals
Save this manual to your list of manuals |
Sony KDL-46HX820 manual content summary:
- Sony KDL-46HX820 | Additional Information for Using Sony® Wall-Mount Bra - Page 1
A-DXF-100-11(1) Compatible TV models for this Wall-Mount Bracket information: XBR-55HX929/55HX927/55HX925/55HX920/46HX929 KDL-55HX827/55HX825/55HX820/46HX820 KDL-55NX720/46NX727/46NX725/46NX720/40NX727/40NX725/40NX720 For product protection and safety reasons, Sony strongly recommends that you use - Sony KDL-46HX820 | Additional Information for Using Sony® Wall-Mount Bra - Page 2
all the required parts along with the Instructions. 2 Decide where you want to install your TV. Refer to the TV installation dimensions table. Dimension Table Screen center point Unit: inches (mm) Model Name XBR-55HX92* XBR-46HX92* KDL-55HX82* KDL-46HX82* KDL-55NX72* KDL-46NX72* KDL-40NX72 - Sony KDL-46HX820 | Additional Information for Using Sony® Wall-Mount Bra - Page 3
of the TV differs, depending on the model of TV; be sure to read the operating instructions of your TV. • Be sure the TV is in a vertical position before turning it on. The TV set must not Bracket ×2 ×2 ×2 ×2 Soft cloth Additional Information for Using Sony Wall-Mount Bracket (SU-WL700) − − - Sony KDL-46HX820 | Additional Information for Using Sony® Wall-Mount Bra - Page 4
screwdriver, set the torque setting to approximately 2 N•m {20 kgf•cm}. Tighten the bottom of the Mounting Bracket using two screws (+PSW M6 × 16). Be sure that all screws are securely tightened with equal torque to the rear of the TV. Screw ×2 Additional Information for Using Sony Wall-Mount - Sony KDL-46HX820 | Additional Information for Using Sony® Wall-Mount Bra - Page 5
are set to TV by yourself. For holding and carrying the TV, refer to your TV's instructions. ✍ • When you put the TV TV models vary depending on the country/region. • The availability of this Wall-Mount Bracket (SU-WL700) varies depending on the country/region. Additional Information for Using Sony
− ± −
Additional Information for Using Sony Wall-Mount Bracket (SU-WL700)
Additional Information for
Using Sony Wall-Mount Bracket (SU-WL700)
Compatible TV models for this Wall-Mount Bracket information:
XBR-55HX929/55HX927/55HX925/55HX920/46HX929
KDL-55HX827/55HX825/55HX820/46HX820
KDL-55NX720/46NX727/46NX725/46NX720/40NX727/40NX725/40NX720
For product protection and safety reasons, Sony strongly recommends that you use the
Wall-Mount Bracket model designed for your TV and that the wall-mounting of your TV
is performed by Sony dealers or licensed contractors.
To Customers
Please provide your licensed contractor with this installation supplement as well as the instructions
(supplied with the SU-WL700 Wall-Mount Bracket). Read these documents carefully for safety and proper
installation.
To Sony Dealers and Contractors
Provide full attention to safety during the installation, periodic maintenance and examination of this
product.
Sufficient expertise is required in installing this product, especially to determine the strength of
the wall for withstanding the TV’s weight. Be sure to entrust the attachment of this product to
the wall to Sony dealers or licensed contractors and pay adequate attention to safety during the
installation. Sony is not liable for any damage or injury caused by mishandling or improper
installation.
For proper installation, follow your wall-mount bracket instructions and the directions below.
A-DXF-±00-
11
(±)