Sony SRXS105 Operating Instructions
Sony SRXS105 Manual
 |
View all Sony SRXS105 manuals
Add to My Manuals
Save this manual to your list of manuals |
Sony SRXS105 manual content summary:
- Sony SRXS105 | Operating Instructions - Page 1
3-992-606-13 (1) Data Projector Operating Instructions Before operating the unit, please read this manual thoroughly and retain it for future reference. SRX-S110 SRX-S105 © 2006 Sony Corporation - Sony SRXS105 | Operating Instructions - Page 2
or moisture. To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only. WARNING THIS APPARATUS MUST BE EARTHED. For the radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio - Sony SRXS105 | Operating Instructions - Page 3
Carrying Handles 13 Using the Adjusters 13 Installing the Projector 14 Installing the SRX Controller in a Computer for Controlling the Projector 14 System Requirements 14 Installing the SRX Controller 14 Connecting a Computer for Controlling the Projector 16 Connecting the Computer via the - Sony SRXS105 | Operating Instructions - Page 4
the Computer for Controlling the Projector 23 Chapter 4 Adjustments and Settings Using the SRX Controller Displaying the Control Function LAMP POWER 30 INSTALLATION 30 LAMP SELECT 30 TEST PATTERN 30 Input Signals And Adjustable/Setting Items 31 Chapter 5 Others Lamp Life 32 Troubleshooting - Sony SRXS105 | Operating Instructions - Page 5
the ceiling; check that the temperature near the installation location is not excessive. • Install the projector on the floor or hang it from the ceiling. Any other installation causes a malfunction such as color irregularity or a shorten lamp life. • Do not install the unit in a location near heat - Sony SRXS105 | Operating Instructions - Page 6
lamps as a light source, and the SRX-S105 uses two 1kW Xenon lamps. These compact-size Xenon lamps provide high brightness of 10,000 ANSI lumens for the SRX-S110 and 5,000 ANSI lumens for the SRX-S105, assuring excellent uniformity on the entire screen. High resolution Sony's new, unique three SXRD - Sony SRXS105 | Operating Instructions - Page 7
ventilation holes (exhaust) d Adjusters Use to keep the projector level if it is installed on an uneven surface. e Lens cover f Lens mount part When attaching the optional lens, consult your Sony dealer. g Carrying handle Use to carry the projector. There is another handle on the rear side. h Front - Sony SRXS105 | Operating Instructions - Page 8
terminals. The projector's lamps will be turned off immediately. When not in use, do not insert the mini-plug. i ETHERNET connector (10BASE-T/100BASE-TX) Connect to the ethernet connector on a computer in which the supplied SRX Controller is installed. You can control the projector from the computer - Sony SRXS105 | Operating Instructions - Page 9
. The Password menu can be displayed only when an authorized administrator starts the SRX Controller on the computer for controlling the projector. For details on the SETTING window and the SERVICE window, refer to the Installation Manual for Dealers. Help menu Shows the version information of the - Sony SRXS105 | Operating Instructions - Page 10
INSTALLATION" windows can be displayed. For details on each window, see "Adjustments and Settings Using the SRX Activating the muting function blocks off lamp light completely by use of a using the buttons also functions when you operate the projector with the Remote Commander. Remote Commander 1 2 - Sony SRXS105 | Operating Instructions - Page 11
polarity. Push the knob to open the lid. Be sure to install the battery from the - side. 2 Replace the lid. Notes • Be sure that there is nothing to obstruct the infrared beam between the Remote Commander and the projector. Direct the Remote Commander toward one of the remote control detectors - Sony SRXS105 | Operating Instructions - Page 12
Preparations 2 Chapter Chapter 2 Preparations Precautions on Installation Unsuitable Installation Do not install the projector in the following situations. Such installations may cause a malfunction or damage to the projector. Poorly ventilated activating the protection circuit. Be sure not to - Sony SRXS105 | Operating Instructions - Page 13
, have at least four people carry the projector using the front and rear handles. Avoid tilting the projector more than ± 10 degrees, and avoid installing it in place other than a floor. Doing so may cause color shading or shorten the lamp life excessively. Blocking the ventilation holes Avoid - Sony SRXS105 | Operating Instructions - Page 14
installation examples with projection distances, see "Installation Manual for Dealers." Screen 310 mm (12 1/4 inches) Projection distance Vertical positioning (side view) Install the projector or Japanese version) Installing the SRX Controller 1 Insert the supplied installation disc into the CD - Sony SRXS105 | Operating Instructions - Page 15
of the SRX Controller is completed. To restart the SRX Controller immediately after installation has been completed, click to check "Launch SRX Controller," then click "Finish." The icon is displayed in the desktop window. 15 Installing the SRX Controller in a Computer for Controlling the Projector - Sony SRXS105 | Operating Instructions - Page 16
that might have excessive voltage to this port. Follow the instructions for this port. Note If the power of the projector remains on for a long period of time without the Ethernet cable connected, the message "Sony SR Projector Initializing..." may appear in the STATUS MESSAGE window while you - Sony SRXS105 | Operating Instructions - Page 17
Exceptions list, referring to the operating instructions supplied with the software. a Menu bar File Select "Quit" from the File menu to exit the SRX Controller. Connect Selects the connection mode between the projector and the computer for controlling the projector. For details, see "Changing the - Sony SRXS105 | Operating Instructions - Page 18
the projector Region: Region where the projector is installed Location: Installation location of the projector Name: Free name To exit the SRX the cable itself. • When installing the optional input board, consult your Sony dealer. Refer also to the instruction manuals of the equipment to be - Sony SRXS105 | Operating Instructions - Page 19
LKRI-001 analog input board to the input board attachment part on the projector, and connect with a computer. Left side INTER LOCK ETHERNET RS232C DVI-D set "Signal Mode" on "Input Source" in the PICTURE CONTROL window of the SRX Controller. (page 26) • When an extension cable is used, the signal - Sony SRXS105 | Operating Instructions - Page 20
(not supplied) to component output/ video GBR HDCAM recorder/player, etc. Betacam, DVD recorder/player, etc. Note When the LKRI-003 is attached to the projector, select the type of signal with "Signal Mode" of "Input Source" in the PICTURE CONTROL window. For Single-link input, select "YPbPr" or - Sony SRXS105 | Operating Instructions - Page 21
Commander Use the supplied Remote Commander or a computer in which the supplied SRX Controller is installed to project the picture on the screen. 1 STATUS LAMP indicator Chapter 3 Projecting SCREEN MODE 1 I MUTING 1 2 4 FUNCTION 1 2 3 INPUT SEL A B C D PICTURE CONT + + + CONTR - Sony SRXS105 | Operating Instructions - Page 22
1 Set the main power switch on the left side of the projector to the upper position. The STATUS LAMP indicator lights red and the projector goes into standby mode. 2 Press the ? button to turn on the projector. The STATUS LAMP indicator lights green. 3 Select the screen mode. Each time you press - Sony SRXS105 | Operating Instructions - Page 23
3 Projecting Using the Computer for Controlling the Projector 1 STATUS LAMP indicator 2 Start your computer and double-click the icon of the SRX Controller in the desktop window. The Browser Screen of the SRX Controller opens. 3 Select the projector you want to operate by double- clicking the - Sony SRXS105 | Operating Instructions - Page 24
be invisible. 8 Click the "INSTALLATION" button to open the INSTALLATION window. 9 Adjust the focus the displayed confirmation dialog. The POWER and STATUS LAMP indicators flash green and the fan continues to stops the fan before the inside of the projector has been cooled down sufficiently and may - Sony SRXS105 | Operating Instructions - Page 25
of the SRX Controller in the desktop window of the computer. The Browser Screen appears. 2 Select the projector you want to operate by double- clicking the projector or click the Select button. The Control Function Menu window opens. 3 Click any of the PICTURE CONTROL, COLOR/ FRAME and INSTALLATION - Sony SRXS105 | Operating Instructions - Page 26
for each input channel displayed on the screen. Chapter 4 Adjustments and Settings Using the SRX Controller 26 PICTURE CONTROL Window Board Shows the input board installed in the relative input board slot of the projector. If you select INPUT A, "LKRI-004" is always displayed. Input Source Signal - Sony SRXS105 | Operating Instructions - Page 27
the SRX Controller When the 10-bit signal based on Sony's unique specification is input, select "10bit Twin Full" or "10bit Single Full" for a signal of Full Range compliance, or "10bit Twin Limited" or "10bit Single Limited" for a signal of Limited Range compliance. When the LKRI-001 is installed - Sony SRXS105 | Operating Instructions - Page 28
displayed on the screen. Board Shows the input board installed in the relative input board slot of the projector. If you select INPUT A, "LKRI-004" is " to the factory-preset values. Dot Phase: Adjusts the phase of the SXRD panels and the input signal. Adjusts the value to obtain the clearest picture - Sony SRXS105 | Operating Instructions - Page 29
is not a malfunction of the projector. Adjust the picture position correctly with "Frame Adjust." INSTALLATION Window The INSTALLATION window is used to adjust the projected picture, change the lamp output, etc. Chapter 4 Adjustments and Settings Using the SRX Controller LENS CONTROL Adjusts the - Sony SRXS105 | Operating Instructions - Page 30
% allows you to obtain the brightest projection image. Note Switching the lamp output frequently may reduce the lamp life. Use of the defined lamp output is recommended. INSTALLATION Selects how to install the projector. Front: Selects front projection. Rear: Selects rear projection. Note When you - Sony SRXS105 | Operating Instructions - Page 31
HD-SDI DVI-D 4K Dot Phase - - z - - - H Size - - z - - - H Shift z z z z z - V Shift z z z z z - z: Adjustable/can be set -: Not adjustable/cannot be set Chapter 4 Adjustments and Settings Using the SRX Controller 31 Input Signals And Adjustable/Setting Items - Sony SRXS105 | Operating Instructions - Page 32
hours SRX-S105: Approx. 1,000 hours The "Lamp A" and "Lamp B" bar indicators in the Control Function Menu window become red when the time for replacement is coming near. The percentage indicates the time used before the recommended time for replacement. Use them as a guide. Be sure to ask your Sony - Sony SRXS105 | Operating Instructions - Page 33
Troubleshooting If the projector appears to be operating erratically, try to diagnose and correct the problem using the following guide. If the problem still persists, consult your Sony dealer. Power Symptom Power is not turned on. Cause The main power is turned off. The projector and a computer - Sony SRXS105 | Operating Instructions - Page 34
POWER SUPPLY ALERT The projector has failed to supply 16V power. 11 PR-284_1 DETACHED The PR-284 board is not attached correctly on the top row. 12 SXRD PANEL TEMPERATURE The temperature of the panels is too high. ALERT 13 LAMP_A FAN ALERT Trouble with the fan for Lamp A, or the harness is - Sony SRXS105 | Operating Instructions - Page 35
32 LOW REAL TIME CLOCK BATTERY 33 FPGA CONFIG FAILURE 34 IIC FAILURE 35 LAMP A ALERT 36 LAMP B ALERT 37 LAMP A WARNING 38 LAMP B WARNING 39 DATA LOAD FAILURE LENS POSITION SENSOR 40 PS FAN FAILURE 41 DVI SIGNAL FAILURE Meaning Trouble with the huge fan at the rear, or the harness is disconnected or - Sony SRXS105 | Operating Instructions - Page 36
-004 is installed DVI-D, XGA, QVGA, SXGA, SXGA+, UXGA, HD, 2048 × 1080 General Dimensions 740 × 500 × 1320 mm (29 1/4 × 19 3/4 × 52 inches) (w/h/d) Mass Approx. 110 kg (242 lb 8 oz) (excluding the optional lamps and lens) Power requirements SRX-S110: 200 to 240 V AC, 50/60 Hz SRX-S105: 100 - Sony SRXS105 | Operating Instructions - Page 37
(1) Installation Manual for Dealers (1) Operating Instructions (CD-ROM) (1) Design and specifications are subject to change without notice. Optional accessories Projection lamp house LKRX-B110 (for SRX-S110) LKRX-B105 (for SRX-S105) Projection lamp LKRX-110 (for SRX-S110) LKRX-105 (for SRX-S105 - Sony SRXS105 | Operating Instructions - Page 38
Chapter 5 Others Pin number 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 Signal name DDC_SCL DDC_SDA NC DATA1- DATA1+ GND DATA3- DATA3+ +5V DDC_GND HOTPLUG_DET DATA0- DATA0+ GND DATA5- DATA5+ GND CLK+ CLK- Preset Signals Preset signal VIDEO60 VIDEO50 HDTV 1024 × 768_VESA60 1024 × - Sony SRXS105 | Operating Instructions - Page 39
Displayed image size in multiple screen mode Screen mode Type of signal Full screen Horizontal size Vertical size Dual screen Horizontal size Vertical size Unit: pixel Quad screen Horizontal size Vertical size VIDEO60 2880 2156 2003 1499 1440 1078 VIDEO50 XGA SXGA1 2880 2849 2560 - Sony SRXS105 | Operating Instructions - Page 40
Mode 27 Input Source 26 INSTALLATION 30 INSTALLATION window 29 Installing the projector 14 L Lamp Life 32 LAMP POWER 30 LAMP SELECT 30 LENS CONTROL 29 30 SRX Controller Browser Screen 17 installing 14 starting 17 STATUS MESSAGE window 34 Supplied accessories 37 T TEST PATTERN 30 Troubleshooting 33 - Sony SRXS105 | Operating Instructions - Page 41
Sony Corporation
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
 |
 |
3-992-606-
13
(1)
Data Projector
Operating Instructions
Before operating the unit, please read this manual
thoroughly and retain it for future reference.
SRX-S110
SRX-S105
© 2006 Sony Corporation