Sony STR DH700 Operating Instructions
Sony STR DH700 - A/V Receiver Manual
 |
UPC - 027242753532
View all Sony STR DH700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Sony STR DH700 manual content summary:
- Sony STR DH700 | Operating Instructions - Page 1
4-129-783-11(3) Multi Channel AV Receiver Operating Instructions STR-DH700 ©2009 Sony Corporation - Sony STR DH700 | Operating Instructions - Page 2
during the normal operation. ENERGY STAR® is a U.S. registered mark. As an ENERGY STAR® partner, Sony Corporation has determined that this product meets the ENERGY STAR® guidelines for energy efficiency. For customers in the United States Owner's Record The model and serial numbers are located on - Sony STR DH700 | Operating Instructions - Page 3
or modifications not expressly approved in this manual could void your authority to operate this equipment. To reduce the risk of electric shock, the speaker cord should be connected to the apparatus and the speakers in accordance with the following instructions. 1) Disconnect the AC power cord from - Sony STR DH700 | Operating Instructions - Page 4
About This Manual • The instructions in this manual are for model STR-DH700. Check your model number by looking at the lower right corner of the front panel. In this manual, models of area code U is used for illustration purposes unless stated otherwise. Any difference in operation is clearly - Sony STR DH700 | Operating Instructions - Page 5
70 Restricting access to specific channels (Parental Lock) (SIRIUS only 72 "BRAVIA" Sync Features What is "BRAVIA" Sync 75 Preparing for the "BRAVIA" Sync 76 Watching a DVD (One-Touch Play 77 Enjoying the TV sound from the speakers connected to the receiver (System Audio Control 78 Turning - Sony STR DH700 | Operating Instructions - Page 6
product 81 Enjoying the system's sound in another room 85 Changing the channel for better sound transmission 86 Enjoying the S-AIR receiver while the S-AIR main unit is in standby mode ......87 Other Operations Switching between digital and analog audio (INPUT MODE 88 Listening to digital sound - Sony STR DH700 | Operating Instructions - Page 7
MUTING VIDEO 2 IN AUTO CAL MIC VIDEO L AUDIO R qh qg qf qd qs qa q; 9 Name A ?/1 (on/standby) B TONE +/- TONE MODE C INPUT SELECTOR D Display E Remote sensor Function Press to turn the receiver on or off (page 29, 38, 39, 61, 63). Adjust the bass and treble for the front channels. Press - Sony STR DH700 | Operating Instructions - Page 8
to select a sound field (page 56, 58). A.F.D. MOVIE MUSIC M TUNING MODE TUNING +/- Press to operate a tuner (FM/ AM) and satellite radio (SIRIUS) (page 62, 68). MEMORY/ ENTER N O PHONES jack Connects to headphones (page 101). P SPEAKERS Press to select the front speaker system (page 30). 8US - Sony STR DH700 | Operating Instructions - Page 9
the LFE channel signal is actually being reproduced. Lights up according to the speaker system used. However, these indicators do not light up if the speaker output is turned off or if headphones are connected. Name D Input indicators Function Light up to indicate the current input. OPT COAX HDMI - Sony STR DH700 | Operating Instructions - Page 10
radio operation. Lights number will change according to the preset station you select. For details on presetting radio stations, see page 64. Name G Dolby Pro Logic indicators Function Lights up one of the respective indicators when the receiver applies Dolby Pro Logic processing to 2 channel - Sony STR DH700 | Operating Instructions - Page 11
indicators Function The letters (L, C, R, etc.) indicate the channels being played back. The boxes around the letters vary to show how the receiver downmixes the source sound (based on the speaker settings). L R C SL SR S SBL SBR SB Front Left Front Right Center (monaural) Surround Left Surround - Sony STR DH700 | Operating Instructions - Page 12
VIDEO 1 SUBWOOFER SPEAKERS HDMI IN/ OUT* jacks Connects to a DVD player, satellite tuner, or a Blu-ray disc player. The image is output to a TV or a projector while the sound can be output from a TV or/and speakers connected to this receiver (page 23). E SPEAKERS section Connects to the speakers - Sony STR DH700 | Operating Instructions - Page 13
HDMI OUT jack to a TV or projector (page 20). Remote commander You can use the supplied RM-AAU021 Remote Commander to operate the receiver and to control the Sony audio/video components that the remote is assigned to operate RETURN/EXIT MENU/HOME TV CH - - CATEGORY + TV CH + PRESET - REPLAY - Sony STR DH700 | Operating Instructions - Page 14
time to turn the TV on or off. AV ?/1 (on/standby) Press to turn on or off the Sony audio/video components that the remote is assigned to operate (page 96). If you press ?/1 (B) at the same time, it will turn off the receiver and other Sony components (SYSTEM STANDBY). Note The function of the - Sony STR DH700 | Operating Instructions - Page 15
TV CH +/- and TV (M) at the same time to select preset TV channels. same time to enable TV operation. N MENU/HOME Press to exit the menu while the menu or on-screen guide of the VCR, DVD player, satellite tuner enter the selection of the receiver, VCR, satellite tuner, CD Sony TV. continued 15US - Sony STR DH700 | Operating Instructions - Page 16
a)The number 5, MASTER VOL +, TV VOL +, and H buttons have tactile dots. Use the tactile dots as references when operating the receiver. b)This button is also available for DIGITAL MEDIA PORT adapter operation. For details on the function of the button, refer to the operating instructions supplied - Sony STR DH700 | Operating Instructions - Page 17
Getting Started 1: Installing the speakers This receiver allows you to use a 7.1 channel system (7 speakers and one subwoofer). Enjoying a 5.1/7.1 channel system To fully enjoy theater-like multi channel surround sound requires five speakers (two front speakers, a center speaker, and two surround - Sony STR DH700 | Operating Instructions - Page 18
2: Connecting the speakers Before connecting the cords, be sure to disconnect the AC power cord (mains lead). H G E A A B ANTENNA AM HDMI SAT IN DVD IN BD IN OUT MPORT DC5V 0.7A MAX VIDEO IN VIDEO OUT AUDIO IN AUDIO OUT SIRIUS TV DIGITAL (ASSIGNABLE) IN SAT DVD IN IN - Sony STR DH700 | Operating Instructions - Page 19
SURROUND BACK/BI-AMP/FRONT B L terminals. b)If you are not using surround back speaker, and you have an additional front speaker system, connect the additional front speaker system to the SPEAKERS SURROUND BACK/BI-AMP/ FRONT B terminals. Set "SB ASGN" to "SPK B" in the System settings menu (page - Sony STR DH700 | Operating Instructions - Page 20
SURROUND R L SA-CD/CD/CD-R TV SAT BD VIDEO 1 SUBWOOFER SPEAKERS OUT FRONT A L R A Component video cord (not supplied) B Video cord (not supplied) C Optical digital cord (not supplied) D Audio cord (not supplied) E HDMI cable (not supplied) We recommend that you use a Sony HDMI cable. 20US - Sony STR DH700 | Operating Instructions - Page 21
turned on, neither video nor audio signals will be transmitted. • When connecting optical digital cords, insert the plugs straight in until they click into place. • Do not bend or tie optical digital cords. Tips • To output the sound of the TV from the speakers connected to the receiver, be sure to - Sony STR DH700 | Operating Instructions - Page 22
illustration that follows. Select the connection according to the jacks on your components. HDMI Digital Y PB/CB PR/CR COMPONENT VIDEO VIDEO Analog High quality image Note Be sure to turn on the receiver when the video and audio signals of a playback component are being output to a TV via the - Sony STR DH700 | Operating Instructions - Page 23
You can listen to TV multi channel surround sound broadcasting from the speakers connected to the receiver. Connect the OPTICAL output jack of the TV to the OPTICAL IN jack of the receiver. Satellite tuner/Set-top box Audio/video signals DVD player Audio/video signals Blu-ray disc player Audio - Sony STR DH700 | Operating Instructions - Page 24
. • This receiver supports the Control for HDMI function. For details, see ""BRAVIA" Sync Features" (page 75). Notes on HDMI connections • An audio signal input to the HDMI IN jack is output from the speaker output jack and HDMI OUT jack. It is not output from any other audio jacks. • Video signals - Sony STR DH700 | Operating Instructions - Page 25
cords according to the jacks of your components. DVD player Video signals Audio signals Note To input multi channel digital audio from the DVD player, set the digital audio output setting on the DVD player. Refer to the operating instructions supplied with the DVD player. Tip All the digital - Sony STR DH700 | Operating Instructions - Page 26
HDMI BD IN SAT IN Y DVD VIDEO 1 MONITOR IN IN OUT DMPORT DC5V 0.7A MAX PB/ CB PR/ CR COMPONENT VIDEO OUT IN IN L VIDEO IN VIDEO IN VIDEO CD/CD/CD-R TV SAT BD VIDEO 1 SUBWOOFER SPEAKERS OUT FRONT A L R A Component video cord (not supplied) B Video cord (not supplied) C Optical - Sony STR DH700 | Operating Instructions - Page 27
FRONT B R L AUDIO OUT SURROUND R L SA-CD/CD/CD-R TV SAT BD VIDEO 1 SUBWOOFER SPEAKERS OUT FRONT A L R (On the front panel) VIDEO 2 IN AUTO CAL MIC VIDEO L AUDIO R Camcorder/ video game A Component video cord (not supplied) B Video cord (not supplied) C Audio cord (not supplied) D Audio - Sony STR DH700 | Operating Instructions - Page 28
the factory setting of the VIDEO 1 input button on the remote so that you can use the button to control your DVD recorder. For details, see "Changing button assignments" (page 96). • You can also rename the VIDEO 1 input so that it can be displayed on the receiver's display. For details, see "Naming - Sony STR DH700 | Operating Instructions - Page 29
operation. ?/1 ?/1 SPEAKERS TONE INPUT SELECTOR PHONES TONE MODE INPUT MODE TUNING MODE TUNING MEMORY/ 2CH/ ENTER A.DIRECT A.F.D. MOVIE MUSIC MASTER VOLUME DISPLAY DIMMER MUTING VIDEO 2 IN AUTO CAL MIC VIDEO L AUDIO R MEMORY/ENTER FRONT A 1 Press ?/1 to turn off the receiver - Sony STR DH700 | Operating Instructions - Page 30
page 96). • When the remote no longer operates the receiver, replace all the batteries with new ones. ?/1 SPEAKERS TONE INPUT SELECTOR PHONES TONE VOLUME DISPLAY DIMMER MUTING VIDEO 2 IN AUTO CAL MIC VIDEO L AUDIO R Press SPEAKERS repeatedly to select the front speaker system you want - Sony STR DH700 | Operating Instructions - Page 31
receiver. • Adjusting the speaker level. • Measuring the distance of each speaker from your listening position. The DCAC is designed to obtain proper sound balance in your room. However, you can adjust the speaker levels and balance manually when headphones are VIDEO 2 IN AUTO CAL MIC VIDEO - Sony STR DH700 | Operating Instructions - Page 32
Performing Auto Calibration TV INPUT TV ?/1 SLEEP DMPORT AV ?/1 ?/1 SYSTEM STANDBY VIDEO1 VIDEO2 BD DVD SAT TV SA-CD/CD TUNER will be maintained. • If you have changed the position of the speakers, it is recommended that you perform Auto Calibration again in order to enjoy the surround sound - Sony STR DH700 | Operating Instructions - Page 33
receiver. - Change the volume level. - Connect the headphones. speaker is detected. Check the front speakers connection. Only one surround speaker is detected. Check the surround speakers connection. The surround back speaker is connected only to the SPEAKERS manually. continued 33US Getting Started - Sony STR DH700 | Operating Instructions - Page 34
To change the settings manually 1 Record down the warning code. 2 Press . 3 Press ?/1 to turn off the receiver. 4 Follow the solution provided in the "Warning codes and solutions" below. 5 Turn on the receiver and perform Auto Calibration again (page 32). Warning codes and solutions Warning code - Sony STR DH700 | Operating Instructions - Page 35
and balance (TEST TONE) You can adjust the speaker levels and balance while listening to the test tone from your listening position. Tip The receiver employs a test tone with a frequency centered at 800 Hz. TV INPUT TV ?/1 SLEEP DMPORT AV ?/1 ?/1 SYSTEM STANDBY VIDEO1 VIDEO2 BD DVD SAT TV - Sony STR DH700 | Operating Instructions - Page 36
INPUT TV ?/1 SLEEP DMPORT AV ?/1 ?/1 SYSTEM STANDBY VIDEO1 the receiver. The selected input appears on the display. Selected input [Display] DMPORT [DMPORT] VIDEO 1 [VIDEO 1] VIDEO 2 [VIDEO off the receiver. To avoid damaging your speakers Before you turn off the receiver, be sure to turn - Sony STR DH700 | Operating Instructions - Page 37
want to create an index name for. You can also use INPUT SELECTOR on the receiver. 2 Press AMP MENU. "1-LEVEL" appears on the display. 3 Press V/v the character type as follows by pressing V/v. Alphabet (upper case) t Numbers t Symbols • To enter a blank space, press b without selecting - Sony STR DH700 | Operating Instructions - Page 38
/ 2CH/ ENTER A.DIRECT A.F.D. MOVIE MUSIC MASTER VOLUME DISPLAY DIMMER MUTING VIDEO 2 IN AUTO CAL MIC VIDEO L AUDIO R 5 Notes • The operation is described for a Sony Super Audio CD player. • Refer to the operating instructions supplied with the Super Audio CD player or CD player. Tip You - Sony STR DH700 | Operating Instructions - Page 39
MASTER VOLUME DISPLAY DIMMER MUTING VIDEO 2 IN AUTO CAL MIC VIDEO L AUDIO R 6 Notes • Refer to the operating instructions supplied with the TV and DVD player/Blu-ray disc player. • Check the following if you cannot listen to multi channel sound. - Be sure this receiver is connected to the - Sony STR DH700 | Operating Instructions - Page 40
Amplifier Operations Navigating through menus By using the amplifier menus, you can make various adjustments to customize the receiver. , V/v/B/b 1 4 7 >10 CLEAR DISPLAY THEATER 23 DVD/BD MENU 56 AUTO CAL D.TUNING 89 D.SKIP MEMORY AMP MENU 0/10 ENTER TOOLS/ OPTIONS MUTING TV VOL MASTER - Sony STR DH700 | Operating Instructions - Page 41
Amplifier Operations Overview of the menus The following options are available in each menu. For details on navigating through menus, see page 40. Menu [Display] LEVEL [1-LEVEL] (page 45) EQ [2-EQ] (page 46) SUR [3-SUR] (page 46) Parameters [Display] Test tonea) [T. TONE] Front speaker balancea) - Sony STR DH700 | Operating Instructions - Page 42
49) HDMI [6-HDMI] (page 50) Parameters [Display] FM station receiving modea) channels (Parental Lock) (SIRIUS only)" (page 72). SIRIUS antenna aiming modea)d) [SR ANT] SIRIUS radio IDa)d) [SR ID] For details, see "Checking receiving DUAL M Synchronizes audio with video A.V.SYNC. N, A.V.SYNC. - Sony STR DH700 | Operating Instructions - Page 43
Amplifier Operations Menu [Display] SYSTEM [7-SYSTEM] (page 51) A. CAL [8-A. CAL] (page 55) to DIST. 23 ft. (1 ft. step) Surround back right speaker distancea)c) [SBR DIST.] Surround speaker positiona) [SUR POS.] Speaker crossover frequencya) [CRS. FREQ] Brightness of the displaya) [DIMMER] - Sony STR DH700 | Operating Instructions - Page 44
can only select this parameter when the surround back speakers are set to "DUAL". d)This parameter is only available if the SiriusConnect Home tuner is connected to the SIRIUS jack on the receiver. e)"AUDIO FOR HDMI" and "CONTROL FOR HDMI" scroll across the display, then "AUDIO" and "CONTROL" appear - Sony STR DH700 | Operating Instructions - Page 45
Amplifier Operations Adjusting the level (LEVEL menu) You can use the LEVEL menu to adjust the balance and level of each speaker. These settings are applied to all sound fields. Select "1-LEVEL" in the amplifier menus. For details on adjusting the parameters, see "Navigating through menus" (page - Sony STR DH700 | Operating Instructions - Page 46
EQ ON The equalizer is turned on. x BASS LVL (Front speaker bass level) x TRE LVL (Front speaker treble level) Notes • This function does not work for signals For details, see "Enjoying Surround Sound" (page 56). Note The receiver lets you apply the last selected sound field to an input whenever it - Sony STR DH700 | Operating Instructions - Page 47
and an extension stream designed for returning those signals to 6.1 discrete channels. Discrete 6.1 channel signals are DVD specific signals not used in movie theaters. e)When two surround back speakers are connected, the output channel will be 7.1 channel. continued 47US Amplifier Operations - Sony STR DH700 | Operating Instructions - Page 48
the surround back speaker in Dolby You can use the TUNER menu to set the FM station receiving mode and to name preset stations. Select "4-TUNER" in the you restrict access to certain channels using your own lock code. For details, see "Restricting access to specific channels (Parental Lock) (SIRIUS - Sony STR DH700 | Operating Instructions - Page 49
Amplifier Operations x SR ID (SIRIUS radio ID) Lets you check the SIRIUS Radio ID. this item to "DEC. AUTO". When signals from the HDMI IN jack are selected, only PCM signals are output from the connected player. When signals in any other format are received, set this item to "DEC. AUTO". • DEC. - Sony STR DH700 | Operating Instructions - Page 50
quality, such as the number of channels, and the sampling frequency, etc. When the TV has stereo speakers, the sound output from the receiver is also stereo as that of the TV, even if you play back multi-channel source. • When you connect the receiver to a video component (projector, etc.), sound - Sony STR DH700 | Operating Instructions - Page 51
Lets you turn the Control for HDMI function on or off. For details, see ""BRAVIA" Sync Features" (page 75). Settings for the system (SYSTEM menu) You can use the SYSTEM menu to set the size and distance of the speakers connected to this system. Select "7-SYSTEM" in the amplifier menus. For details - Sony STR DH700 | Operating Instructions - Page 52
sound, select "SMALL" to activate the bass redirection circuitry and output the surround channel bass frequencies from the subwoofer or other "LARGE" speakers. • LARGE If you connect large speakers that will effectively reproduce bass frequencies, select "LARGE". Normally, select "LARGE". However - Sony STR DH700 | Operating Instructions - Page 53
Amplifier Operations x SB ASGN (Surround back speaker assign) • OFF If you connect surround back speakers to the SPEAKERS SURROUND BACK/BI-AMP/ FRONT B terminals, select "OFF". • BI-AMP If you connect front speakers to the SPEAKERS SURROUND BACK/BI-AMP/ FRONT B terminals using a bi-amplifier - Sony STR DH700 | Operating Instructions - Page 54
the length of A. Example: Adjust the distance B to 15 feet or more when the distance A is 20 feet. Also, the distance between the surround speakers/ surround back speakers and the listening position C cannot be more than 15 feet closer than the distance between the listening position and the front - Sony STR DH700 | Operating Instructions - Page 55
Operations Tip Surround speaker position is designed specifically for implementation of the CINEMA STUDIO EX modes. For other sound fields, speaker position is not so critical. Those sound fields were designed under the premise that the surround speakers back multi channel surround encoded software - Sony STR DH700 | Operating Instructions - Page 56
on S-AIR, see "S-AIR Operations" (page 80). Enjoying Surround Sound Enjoying Dolby Digital and DTS Surround sound (AUTO FORMAT DIRECT) The Auto Format Direct (A.F.D.) mode allows you to listen to higher fidelity sound and select the decoding mode for listening to a 2 channel stereo sound as multi - Sony STR DH700 | Operating Instructions - Page 57
channel 6 channel 6 channel (Multi Stereo) Effect Presents the sound as it was recorded/encoded without adding any surround effects. However, this receiver Surround. In addition, this mode can reproduce sound in 5.1 channel for watching videos of overdubbed or old movies. Performs Dolby Pro Logic II - Sony STR DH700 | Operating Instructions - Page 58
subwoofer This receiver will generate a low frequency signal for output to the subwoofer when there is no LFE signal, which is a low-pass sound effect output from a subwoofer to a 2 channel signal. However, the low frequency signal is not generated for "NEO6 CIN" or "NEO6 MUS" when all speakers are - Sony STR DH700 | Operating Instructions - Page 59
characteristics of the Sony Pictures Entertainment " channel surround formats are downmixed to 2 channels. HEADPHONE DIRECT [HP DIR] Outputs the analog signals without processing by the tone, sound field, etc. * You can only select this sound field if the headphones are connected to the receiver - Sony STR DH700 | Operating Instructions - Page 60
a sampling frequency of more than 48 kHz is input. - the multi channel Linear PCM signals are received via an HDMI IN jack. • When one of the sound fields for music is selected, no sound is output from the subwoofer if all the speakers are set to "LARGE" on the SYSTEM menu. However, the sound - Sony STR DH700 | Operating Instructions - Page 61
use the buttons on the receiver for this operation. ?/1 ?/1 SPEAKERS TONE INPUT SELECTOR PHONES TONE MODE INPUT MODE TUNING MODE TUNING MEMORY/ 2CH/ ENTER A.DIRECT A.F.D. MOVIE MUSIC MASTER VOLUME DISPLAY DIMMER MUTING VIDEO 2 IN AUTO CAL MIC VIDEO L AUDIO R 2CH/A.DIRECT 1 Press - Sony STR DH700 | Operating Instructions - Page 62
the built-in tuner. Before operation, make sure you have connected the FM and AM antennas (aerials) to the receiver (page 28). Tip The display does not light up. TUNING +/- O RETURN/EXIT MENU/HOME TV CH - - CATEGORY + TV CH + PRESET - REPLAY ADVANCE PRESET + .< > < TUNING - CATEGORY MODE - Sony STR DH700 | Operating Instructions - Page 63
frequency is not used in your area. Changing the AM tuning scale (Models of area code U, CA only) You can change the AM tuning scale to either 9 kHz or 10 kHz using the buttons on the receiver. ?/1 ?/1 SPEAKERS TONE INPUT SELECTOR PHONES TONE MODE INPUT MODE TUNING MODE TUNING MEMORY/ 2CH - Sony STR DH700 | Operating Instructions - Page 64
VOL O RETURN/EXIT MENU/HOME TV CH - - CATEGORY + TV CH + PRESET - REPLAY ADVANCE PRESET + number. If "MEMORY" goes out before you select the preset number, start again from step 3. 5 Press ENTER. You can also use MEMORY/ENTER on the receiver. The station is stored as the selected preset number - Sony STR DH700 | Operating Instructions - Page 65
Operations . Then, press ENTER to enter the selection. Using the controls on the receiver 1 Turn INPUT SELECTOR to select the FM or AM band. 2 Press TUNING the character type as follows by pressing V/v. Alphabet (upper case) t Numbers t Symbols • To enter a blank space, press b without selecting a - Sony STR DH700 | Operating Instructions - Page 66
. All other marks and logos are the property of their respective owners. All rights reserved. SIRIUS subscription sold separately. Taxes and a one-time activation fee may apply. SIRIUS tuner required (sold separately) to receive the SIRIUS service. All programming and fees subject to change. It is - Sony STR DH700 | Operating Instructions - Page 67
VIDEO IN IN OPTICAL OPTICA VIDEO OUT AUDIO IN MONITOR AUDIO OUT SA-CD/CD/CD-R TV SAT BD VIDEO 1 SUBWOOFER Note Keep the SiriusConnect Home tuner, antenna, and AC power adaptor away from the speaker VOL O RETURN/EXIT MENU/HOME TV CH - - CATEGORY + TV CH + PRESET - REPLAY ADVANCE PRESET + - Sony STR DH700 | Operating Instructions - Page 68
write it in the space provided here. SIRIUS ID Using the controls on the receiver 1 Turn INPUT SELECTOR to select "SIRIUS". 2 Press TUNING MODE repeatedly to select "AUTO T.", and then press TUNING + or TUNING - to select channel 0. 3 Check the SIRIUS ID on the display and write it in the space - Sony STR DH700 | Operating Instructions - Page 69
select the category you want. The category is selected and the channel with the lowest number in the specified category is selected. 4 Press TUNING + or TUNING - to select the channel. You can also press TUNING MODE on the receiver to select "AUTO T.", and then press TUNING + or TUNING - to select - Sony STR DH700 | Operating Instructions - Page 70
. 3 Press the numeric buttons to enter the channel number. 4 Press ENTER. You can also use MEMORY/ENTER on the receiver. The selected channel is tune in. Displaying the SIRIUS Satellite Radio information on the front panel display ?/1 SPEAKERS TONE INPUT SELECTOR PHONES TONE MODE INPUT MODE - Sony STR DH700 | Operating Instructions - Page 71
also use MEMORY/ENTER on the receiver. The selected channel is registered as the preset channel you selected in step 1. 6 Repeat steps 2 to 5 to preset another channel. You can store channels from 1 to 30. Selecting the channel by using the preset numbers 1 Press TUNER repeatedly to select "SIRIUS - Sony STR DH700 | Operating Instructions - Page 72
to select "SIRIUS". You can also use INPUT SELECTOR on the receiver. 2 Select a channel you want to lock using Category Tuning (page 69) or Direct " appears on the display and the Parental Lock is set. To delete the numbers you have entered, repeat the procedure above from step 3. Select "OFF" in - Sony STR DH700 | Operating Instructions - Page 73
Tuner Operations 9 Reenter the new lock code with the numeric buttons. "CHANGED" appears on the display. To listen to the locked channels 1 Press TUNER repeatedly to select "SIRIUS". You can also use INPUT SELECTOR on the receiver. 2 Select a locked channel you want to listen using Direct Tuning ( - Sony STR DH700 | Operating Instructions - Page 74
Home tuner is connected to a wall socket. You have entered an invalid channel number. The channel to be tuned-in is void due to the change by the broadcast service, or the receiving condition is not good. The selected channel is locked. - The subscription information has - been updated - Sony STR DH700 | Operating Instructions - Page 75
When you connect the receiver and components using other than HDMI connection. We recommend that you connect the receiver to products featuring "BRAVIA" Sync. Note Depending on the connected component, the Control for HDMI function may not work. Refer to the operating instructions of the component - Sony STR DH700 | Operating Instructions - Page 76
is complete. For details on setting the TV, refer to the operating instructions supplied with the TV. When your TV is not compatible with the "Control for HDMI-Easy Setting" function Turn the Control for HDMI function of the receiver and the connected component on individually. 7 >10 CLEAR DISPLAY - Sony STR DH700 | Operating Instructions - Page 77
ray disc by simple operation You can also select a connected component, such as a DVD/Blu-ray disc player using the TV menu. In this case, the receiver and the TV switch to the appropriate HDMI input. Note Depending on the TV, the start of the content may not be output. "BRAVIA" Sync Features 77US - Sony STR DH700 | Operating Instructions - Page 78
the sound will output from the TV speakers. • You can adjust the receiver's volume when you adjust the TV volume. Notes • If System Audio Control does not function according to your TV setting, refer to the operating instructions of the TV. • When "CONTROL FOR HDMI" is set to "CTRL ON", the "AUDIO - Sony STR DH700 | Operating Instructions - Page 79
and the connected components turn off automatically. You can also use the receiver's remote to turn off the TV. Notes • Set the TV Standby Synchro to "ON" before using the System Power Off function. For details, refer to the operating instructions of the TV. • Depending on the status, the connected - Sony STR DH700 | Operating Instructions - Page 80
. (The number of usable S-AIR main unit depends on the use environment.) • S-AIR sub unit (not supplied): The S-AIR sub unit is for receiving sound. - Surround amplifier: You can enjoy surround and surround back speakers sound wirelessly. For details, refer to the operating instruction supplied with - Sony STR DH700 | Operating Instructions - Page 81
SAT BD VIDEO 1 SUBWOOFER Notes • Remove the screws from the slot cover bearing the caution mark. Do not remove other screws. • The slot cover is no longer necessary. However, keep it after detaching. 2 Insert the wireless transmitter. EZW-T100 slot EZW-T100 S-AIR Operations Wireless transmitter - Sony STR DH700 | Operating Instructions - Page 82
and S-AIR receiver, refer to the operating instructions supplied with the surround amplifier and S-AIR receiver. Establishing sound TOOLS/ OPTIONS MUTING TV VOL MASTER VOL AMP MENU O RETURN/EXIT MENU/HOME TV CH - - CATEGORY + TV CH + PRESET - REPLAY ADVANCE PRESET + .< > < To set the ID of - Sony STR DH700 | Operating Instructions - Page 83
if the components are connected to the COAXIAL, OPTICAL or HDMI jacks on this receiver. - the headphones function on the surround amplifier is not available. Pairing the S-AIR main unit with a specific S-AIR sub unit (Pairing operation) To establish sound transmission, you need to set the same - Sony STR DH700 | Operating Instructions - Page 84
of the S-AIR sub unit. x For the surround amplifier Refer to the operating instructions supplied with the surround amplifier. x For the S-AIR receiver Refer to the operating instructions supplied with the S-AIR receiver. 10Pairing completed. "COMPLETE" appears on the display. To exit the menu Press - Sony STR DH700 | Operating Instructions - Page 85
S-AIR receiver, refer to the operating instructions supplied with the S-AIR receiver. , V/v/B/b TV INPUT TV ?/1 SLEEP DMPORT AV ?/1 MENU/HOME TV CH - - CATEGORY + TV CH + PRESET - REPLAY ADVANCE PRESET + .< > Input buttons AMP MENU < 1 Set the ID of the S-AIR receiver to match the ID - Sony STR DH700 | Operating Instructions - Page 86
S-AIR receiver. Note The sound of the S-AIR receiver may be cut off by operation of the S-AIR main unit. Changing the channel for better OPTIONS MUTING TV VOL MASTER VOL AMP MENU O RETURN/EXIT MENU/HOME TV CH - - CATEGORY + TV CH + PRESET - REPLAY ADVANCE PRESET + .< > < 1 Press AMP MENU - Sony STR DH700 | Operating Instructions - Page 87
S-AIR ID C: equivalent channel for Wi-Fi channel 11 • The transmission may be improved by changing the transmission channel (frequency) of the other wireless system(s). For details, refer to the operating instructions of the other wireless system(s). Enjoying the S-AIR receiver while the S-AIR main - Sony STR DH700 | Operating Instructions - Page 88
select the same band for the tuner on the S-AIR receiver. However, you can select input other than TUNER on the S-AIR receiver. • The sound of the S-AIR receiver may be cut off by operation of the S-AIR main unit. Other Operations Switching between digital and analog audio (INPUT MODE) When you - Sony STR DH700 | Operating Instructions - Page 89
source for the DVD player using the OPTICAL IN jack on the receiver: • Connect the optical output jack of the DVD player to the OPTICAL SAT IN jack of the receiver. • Assign "SAT OPT" to "DVD" in the "D. OPT" in the example). 7 Press or b to enter your selection. Other Operations continued 89US - Sony STR DH700 | Operating Instructions - Page 90
a network system such as a portable audio/video source or computer. By connecting a DIGITAL MEDIA PORT adapter (not supplied), you can enjoy sound and image from the connected component on the receiver. For details, refer to the operating instructions supplied with the DIGITAL MEDIA PORT adapter - Sony STR DH700 | Operating Instructions - Page 91
the DIGITAL MEDIA PORT adapter to the DMPORT jack on the receiver. EZW-T100 ANTENNA AM SAT IN SAT IN Y DVD VIDEO 1 MONITOR IN IN OUT DMPORT DC5V 0.7A MAX PB/ CB PR/ CR COMPONENT VIDEO OUT IN IN L VIDEO IN VIDEO IN VIDEO OUT AUDIO IN AUDIO IN AUDIO OUT R SIRIUS TV DIGITAL - Sony STR DH700 | Operating Instructions - Page 92
instructions supplied with the DIGITAL MEDIA PORT adapter. Notes • Depending on the type of DIGITAL MEDIA PORT adapter, you can operate the connected component by using the remote. For details on the remote button operation, see page 13. • Be sure you have connected the MONITOR OUT of the receiver - Sony STR DH700 | Operating Instructions - Page 93
display. If you press SLEEP again, the sleep timer will be canceled. Recording using the receiver You can record from an audio/video component using the receiver. Refer to the operating instructions supplied with your recording component. Recording onto a CD-R You can record onto a CD-R using the - Sony STR DH700 | Operating Instructions - Page 94
amplifier connection. To connect speakers Front speaker (R) Front speaker (L) Hi Lo EZW-T100 ANTENNA AM SAT IN DVD IN HDMI BD IN SAT IN Y DVD VIDEO 1 MONITOR IN IN OUT DMPORT DC5V 0.7A MAX PB/ CB PR/ CR COMPONENT VIDEO OUT IN IN L VIDEO IN VIDEO IN VIDEO OUT AUDIO IN AUDIO - Sony STR DH700 | Operating Instructions - Page 95
speakers , V/v/B/b 1 4 7 >10 CLEAR DISPLAY THEATER 23 DVD/BD MENU 56 AUTO CAL D.TUNING 89 D.SKIP MEMORY AMP MENU 0/10 ENTER TOOLS/ OPTIONS MUTING TV VOL MASTER VOL AMP MENU O RETURN/EXIT MENU/HOME TV CH - - CATEGORY + TV CH SPEAKERS FRONT A terminals can be output from the SPEAKERS SURROUND - Sony STR DH700 | Operating Instructions - Page 96
to the VIDEO 1 jacks on the receiver, you can set the VIDEO 1 button on this remote to Sony VCRs are operated with a VTR 2 or VTR 3 setting which corresponds to 8 mm and VHS respectively. b)Sony DVD recorders are operated with a DVD1 or DVD3 setting. For details, refer to the operating instructions - Sony STR DH700 | Operating Instructions - Page 97
Dimensions", the virtual speaker technology, creates a virtual multisurround environment with actual speakers up to 7.1 channels, and brings the (left/right) and subwoofer channels. It is a designated audio standard for DVD-video and also known as 5.1 channel surround. Since surround information is - Sony STR DH700 | Operating Instructions - Page 98
highest possible for DVD-video. The number of playback channels varies depending on HDMI specification supports HDCP (High-bandwidth Digital Contents Protection), a copy protection technology that incorporates coding technology for digital video with no deterioration, Sony has developed a technology - Sony STR DH700 | Operating Instructions - Page 99
is called sampling, and the number of times per second the Sony, and is a trademark of Sony. xvYCC is an international standard for color space in video service shop. On heat buildup Although the receiver heats up during operation, this is not a malfunction. If you continuously use this receiver - Sony STR DH700 | Operating Instructions - Page 100
the surface may result. On operation Before connecting other components, be sure to turn off and unplug the receiver. On cleaning Clean the cabinet, or benzine. If you have any questions or problems concerning your receiver, please consult your nearest Sony dealer. About S-AIR function • As the S- - Sony STR DH700 | Operating Instructions - Page 101
the following difficulties while using the receiver, use this troubleshooting guide to help you remedy the problem. Audio There is no sound, no matter which component is selected, or only a very low-level sound is heard. • Check that the speakers and components are connected correctly and securely - Sony STR DH700 | Operating Instructions - Page 102
speakers. • Select a CINEMA STUDIO EX mode (page 59). • Adjust the speaker level (page 35). • Make sure the center/surround speakers or DTS multi channel sound is not of this receiver, check receiver. • The DIGITAL MEDIA PORT adapter and/or component is not connected correctly. Turn off the receiver - Sony STR DH700 | Operating Instructions - Page 103
adapter, video output operating instructions of the connected component. • If you change the HDMI connection, connect/disconnect the AC power cord, or there is a power failure, repeat the procedures of "Preparing for the "BRAVIA" Sync" (page 76). No sound is output from the receiver and TV speaker - Sony STR DH700 | Operating Instructions - Page 104
remote cannot be used to control the connected component when using the Control for HDMI function. • Change the input of the receiver to the HDMI input off the system and S-AIR sub unit, then turn on them. • Check that headphones are not connected to the S-AIR sub unit. There is noise or the sound - Sony STR DH700 | Operating Instructions - Page 105
Sony dealer. If an error message appears while you perform Auto Calibration, see "Error and warning codes" (page 33) to solve the problem. For other message, see "SIRIUS Satellite Radio message list" (page 74). PROTECT Irregular current is output to the speakers, or the upper panel of the receiver - Sony STR DH700 | Operating Instructions - Page 106
the problem using the troubleshooting guide Clearing the receiver's memory may remedy the problem (page 29). However, note that all memorized settings will be reset to their initial settings and you will have to readjust all settings on the receiver. If the problem persist Consult your nearest Sony - Sony STR DH700 | Operating Instructions - Page 107
1,710 kHz Antenna Loop antenna Intermediate frequency 450 kHz Video section Inputs/Outputs Video: 1 Vp-p/75 ohms COMPONENT VIDEO: Y: 1 Vp-p/75 ohms PB/CB: 0.7 Operating instructions (this manual) Quick Setup Guide (1) FM wire antenna (aerial) (1) AM loop antenna (aerial) (1) RM-AAU021 Remote - Sony STR DH700 | Operating Instructions - Page 108
a CD-R 93 onto a recording media 94 Remote commander 13 S S-AIR 80 Satellite tuner connecting 26 SB DEC 47 Selecting component 36 sound field 58 speaker system 30 Set-top box connecting 26 SIRIUS TV connecting 20 V VCR connecting 27 Video game connecting 27 (3) Sony Corporation Printed in Malaysia
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
-
79
-
80
-
81
-
82
-
83
-
84
-
85
-
86
-
87
-
88
-
89
-
90
-
91
-
92
-
93
-
94
-
95
-
96
-
97
-
98
-
99
-
100
-
101
-
102
-
103
-
104
-
105
-
106
-
107
-
108
 |
 |
©2009 Sony Corporation
4-129-783-
11
(3)
Multi Channel AV
Receiver
Operating Instructions
STR-DH700