Sony TRV22 Operating Instructions (primary manual)
Sony TRV22 - MiniDV Camcorder With 2.5" LCD Manual
 |
UPC - 027242622067
View all Sony TRV22 manuals
Add to My Manuals
Save this manual to your list of manuals |
Sony TRV22 manual content summary:
- Sony TRV22 | Operating Instructions (primary manual) - Page 1
080-369-11(1) Digital Video Camera Recorder Operating Instructions Before operating the unit, please read this manual thoroughly, and retain upon your Sony dealer regarding this product. Model No. DCR-TRV Model No. AC Serial No Serial No DCR-TRV33 DCR-TRV19/TRV22/TRV33 ©2003 Sony Corporation - Sony TRV22 | Operating Instructions (primary manual) - Page 2
Sony Handycam. With your Handycam, you can capture life's precious moments with superior picture and sound quality. Your Handycam is loaded with advanced features, but at the same time it is very easy to use. You will soon be producing home video -Ion batteries. "Memory Stick" (DCR-TRV22/ TRV33 - Sony TRV22 | Operating Instructions (primary manual) - Page 3
Name: SONY Model No.: DCR-TRV22 Responsible Party: Sony Electronics Inc changes or modifications not expressly approved in this manual could void your authority to operate this equipment installed and used in accordance with the instructions, may cause harmful interference to radio communications - Sony TRV22 | Operating Instructions (primary manual) - Page 4
Viewing moving pictures recorded on the tape using the USB cable (p. 148) •Viewing images recorded on the "Memory Stick" using the USB cable (DCR-TRV22/TRV33 only) (p. 149) •Capturing images on the computer from your camcorder using the USB cable (p. 161) •Converting an analog signal into digital to - Sony TRV22 | Operating Instructions (primary manual) - Page 5
End search/Edit search/Rec Review (p. 37) •Data code (p. 40) •Tape PB ZOOM* (p. 74)/Memory PB ZOOM* (p. 140) •Zero set memory (p. 75) •Title search (p. 76) •Digital program editing (p. 84, 130*) * DCR-TRV22/TRV33 only Before you start reading this manual and operating your camcorder, check the model - Sony TRV22 | Operating Instructions (primary manual) - Page 6
Guide Recording on tape 8 Recording on "Memory Stick" (DCR-TRV22/TRV33 only 10 Getting Started Using this manual 12 Checking supplied accessories 15 Step 1 Preparing the power source ..... 16 Installing the battery pack 16 Charging the battery pack 17 Checking status of battery pack - Battery - Sony TRV22 | Operating Instructions (primary manual) - Page 7
on "Memory Stick" on a computer (For Macintosh users) (DCR-TRV22/TRV33 only) ......... 172 Capturing images from an analog video unit on a computer - Signal convert function (DCR-TRV22/ TRV33 only 173 Customizing Your Camcorder Changing the menu settings 175 Troubleshooting Types of trouble and - Sony TRV22 | Operating Instructions (primary manual) - Page 8
Quick Start Guide - Recording on tape Connecting the power cord (p. 17) Use the battery pack when using your camcorder outdoors (p. 16). Open the DC IN jack cover. AC Adaptor (supplied) 2 3 1 Connect the plug with its v mark facing the battery. Inserting the cassette 1 Slide OPEN/ZEJECT in the - Sony TRV22 | Operating Instructions (primary manual) - Page 9
Quick Start Guide Recording a picture on the tape (p. 25) 1 Open the lens cap (p. 25). 3 Press OPEN to open the LCD panel. The picture appears on the screen. 2 Set the POWER switch to CAMERA while pressing the small green button. POWER VCR OFF(CHG) CAMERA MEMORY Viewfinder When the LCD panel is - Sony TRV22 | Operating Instructions (primary manual) - Page 10
Guide - Recording on "Memory Stick" (DCR-TRV22/TRV33 only) Connecting the power cord (p. 17) Use the battery pack when using your camcorder outdoors (p. 16). Open the DC IN jack cover. AC Adaptor (supplied) 2 3 1 Connect the plug with its v mark facing the battery. Inserting the "Memory Stick - Sony TRV22 | Operating Instructions (primary manual) - Page 11
"Memory Stick." When you purchase your camcorder, the clock setting is set to off. If you want to record the date and time for a picture, set the clock setting before recording (p. 22). 640 FINE 12 101 640 FINE 101 Monitoring the playback still image on the LCD screen (p. 135) 1 Set the POWER - Sony TRV22 | Operating Instructions (primary manual) - Page 12
After "Advanced Recording Operations" section of this manual, position of the POWER switch is shown by the icons below. POWER VCR OFF(CHG) CAMERA MEMORY : Set the POWER switch to VCR. : Set the POWER switch to CAMERA. : Set the POWER switch to MEMORY. (DCR-TRV22/TRV33 only) When you carry out an - Sony TRV22 | Operating Instructions (primary manual) - Page 13
Getting Started Using this manual Note on Cassette Memory Your camcorder is based on the DV format. You can use only mini DV cassettes with your camcorder. We recommend that you use a cassette with Cassette Memory . Cassettes with Cassette Memory have the (Cassette Memory) mark. Note on TV color - Sony TRV22 | Operating Instructions (primary manual) - Page 14
Using this manual Precautions on camcorder care Lens and LCD screen/finder (on mounted models only) •The LCD screen and the finder are manufactured using extremely high-precision technology, so over 99.99% of the pixels are operational for effective use. However, there may be some tiny black points - Sony TRV22 | Operating Instructions (primary manual) - Page 15
Getting Started Checking supplied accessories Make sure that the following accessories are supplied with your camcorder. 1 2 3 4 5 6 7 8 9 q; qa qs 1 AC-L15A/L15B AC Adaptor (1), Power cord (1) (p. 17) 2 NP-FM30 rechargeable battery pack (1) (p. 16) 3 A/V connecting cable (1) (p. 44) - Sony TRV22 | Operating Instructions (primary manual) - Page 16
of the arrow while pressing BATT down. BATT release button If you use the viewfinder when a large capacity battery pack is installed If you install the NP-FM70/QM71/QM71D/FM91/QM91/QM91D battery pack on your camcorder, extend the viewfinder, and lift up the viewfinder to a comfortable angle. 16 - Sony TRV22 | Operating Instructions (primary manual) - Page 17
. (1) Install the battery pack on your camcorder. (2) Connect the AC Adaptor supplied with your camcorder to the DC IN jack with the v mark on the DC plug facing the battery. (3) Connect the power cord to the AC Adaptor. (4) Connect the power cord to a wall outlet. (5) Set the POWER switch to OFF - Sony TRV22 | Operating Instructions (primary manual) - Page 18
you use the AC Adaptor Place the AC Adaptor near a wall outlet. While using the AC Adaptor, if any trouble occurs with this unit, disconnect the plug from a wall outlet as soon as possible to cut off the power. Note on the CHG lamp The CHG lamp flashes in the following cases: - The battery pack is - Sony TRV22 | Operating Instructions (primary manual) - Page 19
1 Preparing the power source Recording time DCR-TRV19/TRV22 Battery pack Recording with the viewfinder Continuous Typical* NP-FM30 (supplied) 125 65 NP-FM50 200 105 NP-FM70 415 215 NP-QM71/QM71D 485 255 NP-FM91/QM91/QM91D 725 380 Recording with the LCD screen Continuous Typical - Sony TRV22 | Operating Instructions (primary manual) - Page 20
Step 1 Preparing the power source Playing time DCR-TRV19/TRV22 Battery pack NP-FM30 (supplied) NP-FM50 NP-FM70 NP-QM71/QM71D NP-FM91/QM91/QM91D Playing time on the LCD panel 100 165 345 400 605 Playing time on with the LCD screen closed 150 240 495 580 865 DCR-TRV33 Battery pack NP-FM30 ( - Sony TRV22 | Operating Instructions (primary manual) - Page 21
set itself has been turned off. Notes • The AC Adaptor can supply power from a wall outlet even if the battery pack is attached to your camcorder. • The DC IN jack has "source priority." This means that the battery pack cannot supply any power if the power cord is connected to the DC IN jack, even - Sony TRV22 | Operating Instructions (primary manual) - Page 22
time you set the POWER switch to CAMERA or MEMORY (DCR-TRV22/TRV33 only) unless you set the date and time settings. If you do not set the date and time and "--:--:--" are recorded on the tape or the "Memory Stick" (DCR-TRV22/TRV33 only) as the data code. If you do not use your camcorder for about - Sony TRV22 | Operating Instructions (primary manual) - Page 23
Step 3 Using the touch panel Your camcorder has operation buttons on the LCD screen. Touch the LCD screen directly with your finger to operate each function. (1) Set the POWER switch to CAMERA to record, VCR to play back, or MEMORY to use the "Memory Stick" (DCR-TRV22/TRV33 only). (2) Press OPEN to - Sony TRV22 | Operating Instructions (primary manual) - Page 24
LCD BRT, VOL, END SCH DATA CODE, DIG EFFT*, PB ZOOM* V SPD PLAY, A DUB CTRL, REC CTRL * DCR-TRV22/TRV33 only When the POWER switch is set to MEMORY (DCR-TRV22/TRV33 only) During memory camera PAGE1 PAGE2 PAGE3 SPOT FOCUS, MENU, FOCUS, PLAY, PB FOLDR, SPOT METER, EXPOSURE SELFTIMER, PLAY, MEM MIX - Sony TRV22 | Operating Instructions (primary manual) - Page 25
appears on the screen. (5) Press START/STOP. Your camcorder starts recording. The REC indicator appears. The camera recording lamp located on the front of your camcorder lights up. To stop recording, press START/STOP again. 3 LOCK switch 1 POWER VCR OFF(CHG) CAMERA MEMORY 4 Camera recording - Sony TRV22 | Operating Instructions (primary manual) - Page 26
modes on one tape. - When you change the battery pack, set the POWER switch to OFF (CHG). If you leave your camcorder during standby for 5 minutes while the cassette is inserted Your camcorder automatically turns off. This is to save battery power and to prevent battery pack and tape wear. To return - Sony TRV22 | Operating Instructions (primary manual) - Page 27
Recording - Basics Recording a picture Indicators displayed during recording Indicators are not recorded on the tape. Remaining battery time Cassette Memory This appears when using the cassette with Cassette Memory. Recording mode STBY/REC 40min REC 0:00:01 60min JUL 4 2003 12:05:56PM FN - Sony TRV22 | Operating Instructions (primary manual) - Page 28
cap. (2) Set the POWER switch to OFF (CHG). (3) Close the LCD panel. (4) Ejectthecassette. (5) Removethepowersource. Adjusting the LCD screen 180° 90° 90° screen You can turn the LCD panel over and move it back to your camcorder body with the LCD screen facing out. Notes •When using the LCD screen - Sony TRV22 | Operating Instructions (primary manual) - Page 29
mode This feature allows the camera subject to view him- or herself on the LCD screen. The subject uses this feature to check his or her own image on the LCD screen while you look at the subject in the viewfinder. (1) Extendtheviewfinder. (2) RotatetheLCDpanel180degrees. 1 2 Picture in the mirror - Sony TRV22 | Operating Instructions (primary manual) - Page 30
POWER switch is set to MEMORY (DCR-TRV22/TRV33 only), press FN and select PAGE3. (2) Press LCD BRT. The screen to adjust the brightness of the LCD screen appears. (3) Adjust the brightness of the LCD screen screen backlight You can change the brightness of the backlight when using the battery pack - Sony TRV22 | Operating Instructions (primary manual) - Page 31
and move the viewfinder lens adjustment lever. Viewfinder lens adjustment lever Viewfinder backlight You can change the brightness of the backlight when using the battery pack. Select VF B.L. in in the menu settings (p. 178). Even if you adjust VF B.L. The recorded picture will not be affected. The - Sony TRV22 | Operating Instructions (primary manual) - Page 32
zoom can be set to 20× or 120×. To activate digital zoom, select the digital zoom power in D ZOOM in in the menu settings (p. 177). The digital zoom is set to 1/2 inch) away in the wide-angle position. When the POWER switch is set to MEMORY (DCR-TRV22/TRV33 only) You cannot use the digital zoom. 32 - Sony TRV22 | Operating Instructions (primary manual) - Page 33
the subject or a subject with a light background, use the back light function. (1) Set the POWER switch to CAMERA or MEMORY (DCR-TRV22/TRV33 only). (2) Press BACK LIGHT. The . indicator appears on the screen. BACK LIGHT To cancel the back light function Press BACK LIGHT again. When shooting backlit - Sony TRV22 | Operating Instructions (primary manual) - Page 34
, the picture may be recorded in incorrect or unnatural colors. (1) Set the POWER switch to CAMERA or MEMORY (DCR-TRV22/TRV33 only). (2) Slide NIGHTSHOT to ON. The and "NIGHTSHOT" indicators flash on the screen. NIGHTSHOT OFF ON NightShot Light emitter To cancel NightShot Slide NIGHTSHOT to OFF - Sony TRV22 | Operating Instructions (primary manual) - Page 35
DCR-TRV22/TRV33 only) Color Slow Shutter enables you to record color images in a dim place. (1) Set the POWER switch to CAMERA. (2) Slide NIGHTSHOT to OFF. (3) Press FN and select PAGE2. (4) Press COLOR SLW S. The indicator lights up on the screen with NightShot, focus manually. •Do not cover - Sony TRV22 | Operating Instructions (primary manual) - Page 36
Recording a picture When the POWER switch is set to MEMORY (DCR-TRV22/TRV33 only) You cannot use the cannot use the following functions (DCRTRV22/TRV33 only): - Fader - Digital effect - PROGRAM AE - Manual exposure - Flexible Spot Meter In total darkness (DCR-TRV22/TRV33 only) Color Slow Shutter - Sony TRV22 | Operating Instructions (primary manual) - Page 37
POWER switch to CAMERA. (2) Press FN to display PAGE1. (3) Press END SCH. The last 5 seconds of the recorded section are played back and your camcorder Memory, end search does not work once you eject the cassette after you have recorded on the tape. If you use a cassette with Cassette Memory, - Sony TRV22 | Operating Instructions (primary manual) - Page 38
7 /- or +. 7/- : To go backward + : To go forward Rec Review You can check the last recorded section. (1) Set the POWER switch to CAMERA. (2) Press FN to display PAGE1. (3) Press MENU to display most recently will be played back for a few seconds, and then your camcorder will return to standby. 38 - Sony TRV22 | Operating Instructions (primary manual) - Page 39
POWER VCR OFF(CHG) CAMERA MEMORY tape Press during playback stop. To view a still image (playback pause) Press during playback. To resume playback, press again. If the playback pause lasts more than 5 minutes, the camcorder automatically switches to the stop mode. If you leave the power - Sony TRV22 | Operating Instructions (primary manual) - Page 40
Playing back tape To display the screen indicators - Display function Press DSPL/BATT INFO on your camcorder or DISPLAY on the Remote Commander supplied with your camcorder. The indicators disappear from the screen. To make the indicators appear, press DSPL/BATT INFO or DISPLAY on the Remote - Sony TRV22 | Operating Instructions (primary manual) - Page 41
POWER switch is set to OFF (CHG), no indicator appears. Various settings Various settings shows your camcorder's recording information at the time of recording. During tape the tape is being played back. - The tape is unreadable due to tape damage or noise. - The tape was recorded by a camcorder - Sony TRV22 | Operating Instructions (primary manual) - Page 42
tape Various playback modes To operate video control buttons, set the POWER switch to VCR. Using the touch panel (1) Press FN and select PAGE3. (2) Press V SPD PLAY to display video section are played back then your camcorder stops. * Press **Press to pause playback. Press to resume normal - Sony TRV22 | Operating Instructions (primary manual) - Page 43
Basics Playing back tape Video control buttons Marks on your camcorder are different from those on the Remote Commander supplied with your camcorder. On your camcorder: To play back or pause the tape To stop the tape To rewind the tape To fastforward the tape To play back the tape slowly To forward - Sony TRV22 | Operating Instructions (primary manual) - Page 44
buttons in the same way as when you view playback pictures on the LCD screen. When viewing the playback picture on the TV screen, we recommend that you power your camcorder from a wall outlet using the AC Adaptor. Refer to the operating instructions of your TV. Open the jack cover. Connect your - Sony TRV22 | Operating Instructions (primary manual) - Page 45
cable (optional) to the S video jacks on both your camcorder and the TV or the VCR. This connection produces higher quality DV format pictures. • There is no sound output when connecting only with an S video cable (optional). To display the screen indicators on TV Set DISPLAY in to V-OUT/LCD in - Sony TRV22 | Operating Instructions (primary manual) - Page 46
- Advanced Recording Operations - Recording still images on "Memory Stick" during tape recording standby or tape recording (DCR-TRV22/TRV33 only) Insert a "Memory Stick" before the following operation. During tape recording standby The POWER switch should be set to . (1) Keep pressing PHOTO - Sony TRV22 | Operating Instructions (primary manual) - Page 47
with image quality as set when the POWER switch is set to MEMORY. • When recording with higher image quality, use of memory photo recording is recommended. During and after recording still images on the "Memory Stick" Your camcorder continues recording on the tape. When you press PHOTO on the - Sony TRV22 | Operating Instructions (primary manual) - Page 48
is displayed on the screen until the recording is completed. 1 CAPTURE FN 2 DCR-TRV19 FN Notes •During tape photo recording, you cannot change the mode or setting. •When recording a still image, do not shake your camcorder. The image may fluctuate. •The tape photo recording function does - Sony TRV22 | Operating Instructions (primary manual) - Page 49
. When you press PHOTO on the Remote Commander Your camcorder immediately records the image that is on the screen when you press the button. To record still images on a tape during tape recording You cannot check an image on the screen by pressing PHOTO lightly. Press PHOTO deeply. The still - Sony TRV22 | Operating Instructions (primary manual) - Page 50
press START/STOP again. Recording still images on the "Memory Stick" during recording standby (DCR-TRV22/TRV33 only) The POWER switch should be set to . Operate by touching the panel. (1) Follow steps 1 to 3 in "Recording on the tape." (2) Press PHOTO deeply. The self-timer starts counting down - Sony TRV22 | Operating Instructions (primary manual) - Page 51
. When self-timer recording is finished The self-timer recording is automatically canceled. When the POWER switch is set to MEMORY (DCR-TRV22/TRV33 only) You can also record still images onto the "Memory Stick" with the self-timer (p. 127). Setting up a recording using the self-timer You can set - Sony TRV22 | Operating Instructions (primary manual) - Page 52
followings in the AUTO mode - You remove the battery pack for replacement. - You bring your camcorder from indoors to outdoors holding the exposure, or vice versa. Point your camcorder at the white subject for about 10 seconds after setting the POWER switch to CAMERA to get better adjustment. If - Sony TRV22 | Operating Instructions (primary manual) - Page 53
usual tape recording. The recording angle will not become wider with the zoom lever on the T (telephoto) side. * The picture played back in the wide mode on a normal TV appears the same as the picture played back in the wide mode on your camcorder [a]. [a] [b] 16:9WIDE [c] [d] The POWER switch - Sony TRV22 | Operating Instructions (primary manual) - Page 54
: - Recording still images on the "Memory Stick" during tape recording or tape recording standby (DCR-TRV22/TRV33 only) - BOUNCE - OLD MOVIE (DCR-TRV22/TRV33 only) •Pictures recorded on the tape in wide mode cannot be returned to normal size. Pictures on a TV screen Pictures recorded in the 16:9WIDE - Sony TRV22 | Operating Instructions (primary manual) - Page 55
REC MONOTONE When fading in, the picture gradually changes from black-and-white to color. When fading out, the picture gradually changes from color to black-and-white. 1) You can use BOUNCE when D ZOOM in 2) You can fade in only. 3) DCR-TRV22/TRV33 only is set to OFF in the menu settings. 55 - Sony TRV22 | Operating Instructions (primary manual) - Page 56
Using the fader function The POWER switch should be set to . Operate by touching the panel. (1) When fading in [a] Press FN to display PAGE1 during recording standby. When fading out [b] Press FN to display PAGE1 during recording. (2) Press FADER. The screen to select the fader mode appears. - Sony TRV22 | Operating Instructions (primary manual) - Page 57
on the tape. When the image is being stored, the playback picture disappears. During BOUNCE is on, you cannot use the following functions: - Zoom - Picture effect - Manual exposure - Flexible Spot Meter - Manual focus - PROGRAM AE - Wide mode - Photo recording in "Memory Stick" (DCR-TRV22/TRV33 only - Sony TRV22 | Operating Instructions (primary manual) - Page 58
sepia. B&W : The picture is monochrome (black-and-white). SOLARIZE [b] : The picture picture is mosaic. [a] [b] [c] [d] The POWER switch should be set to . Operate by P EFFECT in , then press EXEC (p. 176). MANUAL SET PROGRAM AE P EFFECT FLASH MODE FLASH LVL WHT DCR-TRV22/TRV33 only) 58 - Sony TRV22 | Operating Instructions (primary manual) - Page 59
Recording Operations Using special effects - Digital effect (DCR-TRV22/TRV33 only) STILL You can record a still image brightly. OLD MOVIE You can add an old movie type atmosphere to pictures. Your camcorder automatically sets the 16:9WIDE mode, picture effect to SEPIA, and the appropriate shutter - Sony TRV22 | Operating Instructions (primary manual) - Page 60
effect (DCR-TRV22/TRV33 only) The POWER switch should be set to . Operate by touching the panel. (1) Press FN and select PAGE2. (2) Press DIG EFFT. The screen to select a digital effect is displayed. (3) Press a desired mode. When you select STILL or LUMI., the still image is stored in memory - Sony TRV22 | Operating Instructions (primary manual) - Page 61
Using special effects - Digital effect (DCR-TRV22/TRV33 only) Shutter speed Shutter speed number SLOW SHTR 1 SLOW SHTR 2 SLOW SHTR 3 SLOW SHTR 4 Shutter speed AE When recording in the SLOW SHTR mode Auto focus may not be effective. Focus manually using a tripod. Advanced Recording Operations 61 - Sony TRV22 | Operating Instructions (primary manual) - Page 62
signs. LANDSCAPE** This mode is for when you record distant subjects such as mountains. Also it prevents your camcorder from focusing on glass or metal mesh in windows when you record a subject behind glass or a screen. * Your camcorder focuses only on subjects in the middle to far distance. **Your - Sony TRV22 | Operating Instructions (primary manual) - Page 63
) - Spot Focus •PROGRAM AE does not work in the following cases (The indicator flashes.): - NIGHTSHOT is set to ON. - To record images on the "Memory Stick" using the MEMORY MIX (DCR-TRV22/ TRV33 only) •When you set the POWER switch to MEMORY, the SPORTS mode does not work. (The indicator flashes - Sony TRV22 | Operating Instructions (primary manual) - Page 64
dark pictures (e.g. night scenes) faithfully The POWER switch should be set to or TRV33 only). Operate by touching the panel. (DCR-TRV22/ (1) Press FN to display PAGE1. (2) Press EXPOSURE. The screen to adjust the exposure appears. (3) Press MANUAL. (4) Adjust the exposure using - (to dim - Sony TRV22 | Operating Instructions (primary manual) - Page 65
as with a subject that is on stage and lit by a spotlight. The POWER switch should be set to or TRV33 only). Operate by touching the panel. (DCR-TRV22/ (1) Press FN to display PAGE1. (2) Press SPOT METER. The SPOT METER screen appears. (3) Press the desired area in the frame. The SPOT METER - Sony TRV22 | Operating Instructions (primary manual) - Page 66
a subject in the foreground to a subject in the background The POWER switch should be set to or TRV33 only). Operate by touching the panel. (DCR-TRV22/ (1) Press FN to display PAGE1. (2) Press FOCUS. (3) Press MANUAL. The screen to adjust the focus appears. (4) Press T or t to sharpen focus - Sony TRV22 | Operating Instructions (primary manual) - Page 67
just the point you want to focus on and with its focus fixed. The POWER switch should be set to or TRV33 only). Operate by touching the panel. (DCR-TRV22/ (1) Press FN to display PAGE1. (2) Press SPOT FOCUS. The SPOT FOCUS screen appears. (3) Press the desired area in the frame. The SPOT FOCUS - Sony TRV22 | Operating Instructions (primary manual) - Page 68
camcorder frames from the selected time. The POWER switch should be set to . TAPE indicator flashes on the screen. (12) Press START/STOP to start Interval Recording. The INTERVAL TAPE indicator lights up during Interval Recording. 4 TAPE SET I NT. REC I NTERVAL REC T I ME EXIT 30SEC 5 TAPE - Sony TRV22 | Operating Instructions (primary manual) - Page 69
, and operate your camcorder using the Remote Commander to avoid camera-shake. The POWER switch should be set to . Operate by touching the panel. (1) Press FN to display PAGE1. (2) Press MENU to display the menu. (3) Select FRAME REC in , then press EXEC (p. 182). TAPE - Sony TRV22 | Operating Instructions (primary manual) - Page 70
tM. FADER t BOUNCE t MONOTONE (no indicator) T DOT* T WIPE* T OVERLAP* * DCR-TRV22/TRV33 only ON: The LCD screen lights up. 4 When the POWER switch is set to CAMERA EXPO- OK SURE ON FADER When the POWER switch is set to MEMORY (DCR-TRV22/TRV33 only) EXPO- OK SURE ON Viewfinder To make - Sony TRV22 | Operating Instructions (primary manual) - Page 71
Advanced Recording Operations Using the viewfinder Note When the POWER switch is set to VCR or during memory playback (DCR-TRV22/ TRV33 only), you cannot operate with the touch panel using the viewfinder. To operate the items that do not appear Set the LCD panel and - Sony TRV22 | Operating Instructions (primary manual) - Page 72
using picture effect. •You cannot record images on the tape on your camcorder while you are processing the image using picture effect. Record images on the "Memory Stick" (DCR-TRV22/ TRV33 only, p. 118, 128), or on a VCR using your camcorder as a player. Pictures processed by picture effect These - Sony TRV22 | Operating Instructions (primary manual) - Page 73
Advanced Playback Operations Playing back tape with digital effect (DCR-TRV22/TRV33 only) The POWER switch should be set to . Operate by touching the panel. (1) During playback or playback pause, press FN and select PAGE2. (2) Press DIG EFFT. The screen to select a digital effect is displayed. - Sony TRV22 | Operating Instructions (primary manual) - Page 74
Enlarging images recorded on tape - Tape PB ZOOM (DCR-TRV22/TRV33 only) Besides the operation described here, your camcorder can enlarge still images recorded on the "Memory Stick" (p. 140). The POWER switch should be set to . Operate by touching the panel. (1) During playback or playback pause - Sony TRV22 | Operating Instructions (primary manual) - Page 75
Advanced Playback Operations Quickly locating a scene - Zero set memory Your camcorder automatically searches for a desired scene having the tape counter value of "0:00:00." Use the Remote Commander for this operation. The POWER switch should be set to . (1) During playback, press ZERO SET - Sony TRV22 | Operating Instructions (primary manual) - Page 76
Searching the boundaries of recorded tape by title - Title search Use the cassette with Cassette Memory for this operation. Use the Remote Commander for this operation. Before operation Set CM SEARCH in to ON in the menu settings. (The default setting is ON.) The POWER switch should be set to . - Sony TRV22 | Operating Instructions (primary manual) - Page 77
appears. The date search screen appears. The indicator changes as follows: tTITLE SEARCH tDATE SEARCH tPHOTO SEARCH* (no indicator) T PHOTO SCAN*T * DCR-TRV19 only (2) Press . or > on the Remote Commander to select the date for playback. Your camcorder automatically starts playback at the - Sony TRV22 | Operating Instructions (primary manual) - Page 78
for the date without using Cassette Memory The POWER switch should be set to camcorder may not accurately find the point where the recording date changes. If the tape has a blank portion between recorded portions Date search may not work correctly. Cassette Memory The cassette with Cassette Memory - Sony TRV22 | Operating Instructions (primary manual) - Page 79
or > on the Remote Commander to select the date for playback. Your camcorder automatically starts playback of the photo having the date that you selected. 1 on the tape To stop searching Press x on the Remote Commander. Searching for a photo without using cassette memory The POWER switch - Sony TRV22 | Operating Instructions (primary manual) - Page 80
DCR your camcorder. Scanning photo The POWER switch Commander or on your camcorder. If a tape has a blank section between recorded sections PHOTO SEARCH and PHOTO SCAN may not work correctly. The available number of photos that can be searched using the cassette memory - Sony TRV22 | Operating Instructions (primary manual) - Page 81
- Editing - Dubbing tape You can dub or edit on the VCR connected to your camcorder using your camcorder as a player. You can connect either the A/V connecting cable (supplied) or i.LINK cable (optional). If you connect with the i.LINK cable (optional), video and audio signals are transmitted in - Sony TRV22 | Operating Instructions (primary manual) - Page 82
done. •Titles, screen indicators, Cassette Memory contents, and "Memory Stick" index screen lettering cannot be recorded. The POWER switch should be set to . (1) Insert a blank tape (or the tape you want to record over) into the VCR, and insert the recorded tape into your camcorder. (2) Prepare - Sony TRV22 | Operating Instructions (primary manual) - Page 83
picture effect, digital effect* or PB ZOOM* These are not output through the DV Interface. * DCR-TRV22/TRV33 only If you record a paused playback picture •The recorded picture becomes rough with the DV Interface. •The picture may jitter when you play back the picture using other video equipment. 83 - Sony TRV22 | Operating Instructions (primary manual) - Page 84
tape without operating the VCR. Scenes can be selected by frame. You can set up to 20 programs. Your camcorder can dub on the "Memory Stick" (DCR-TRV22 2 Performing Digital program editing (Dubbing the tape) (p. 92). Note When editing digital video, the operation signals to the VCR cannot be - Sony TRV22 | Operating Instructions (primary manual) - Page 85
video camera recorder, set its power switch to VCR/ VTR. (2) Press FN to display PAGE1. (3) Press MENU to display the menu. (4) Select VIDEO EDIT in , then press EXEC (p. 185). (5) Select TAPE, then press EXEC (DCR-TRV22 SPL AY V I DEO ED I T EXIT RETURN TAPE MEMORY EXEC RET. 5 V I DEO ED I T - Sony TRV22 | Operating Instructions (primary manual) - Page 86
tape) (11) Select PAUSEMODE, then press EXEC. (12) Select the mode to cancel recording pause on the VCR, then press EXEC. The correct button depends on your VCR. Refer to the operating instructions rays emitter of your camcorder and face it towards the VCR flashes on the screen. When finished, the - Sony TRV22 | Operating Instructions (primary manual) - Page 87
. About the IR SETUP code The IR SETUP code is stored in the memory of your camcorder. Be sure to set the correct code, depending on your VCR. Default setting is code number 3. Brand Sony Admiral (M. Wards) Aiwa Akai Audio Dynamic Bell&Howell (M. Wards) Broksonic Canon Citizen Craig Curtis - Sony TRV22 | Operating Instructions (primary manual) - Page 88
VCR does not support IR SETUP codes. When the VCR does not operate correctly •After checking the code in "About the IR SETUP code" (p. 87), set the IR SETUP or the PAUSEMODE again. •Place your camcorder at least 30 cm (12 in.) away from the VCR. •Refer to the operating instructions of your - Sony TRV22 | Operating Instructions (primary manual) - Page 89
seconds of the tape may not be recorded properly. Be sure to allow about 10 seconds' lead before starting the recording. •When the recording unit cannot be operated properly by the i.LINK cable, leave the connection as it is, and make the A/V connecting cable settings (p. 85). Video and audio are - Sony TRV22 | Operating Instructions (primary manual) - Page 90
camcorder, and insert the tape for recording into the VCR. (2) Press FN to display PAGE1. (3) Press MENU to display the menu. (4) Select VIDEO EDIT in , then press EXEC (p. 185). (5) Select TAPE, then press EXEC (DCR-TRV22 video control buttons on the screen, then pause playback. TAPE MEMORY EXEC - Sony TRV22 | Operating Instructions (primary manual) - Page 91
cannot set IN or OUT. If there is a blank portion between the IN point and the OUT point on the tape The total time may not be displayed correctly. Erasing the program you have set Erase OUT mark first, and then IN mark of the last - Sony TRV22 | Operating Instructions (primary manual) - Page 92
) Operation 2: Performing Digital program editing (Dubbing the tape) The POWER switch should be set to . Operate by touching the panel. (1) When you use a digital video camera recorder, set the power switch of VCR to VCR/VTR. (2) Make sure your camcorder and the VCR are connected, and that the - Sony TRV22 | Operating Instructions (primary manual) - Page 93
programs You can record the tape from another VCR or a TV program from a TV that has video/ audio outputs. Use your camcorder as a recorder. You can connect either the A/V connecting cable (supplied) (DCR-TRV22/TRV33 only) or i.LINK cable (optional). If you connect with the i.LINK cable (optional - Sony TRV22 | Operating Instructions (primary manual) - Page 94
, the right channel audio is output. If your VCR has an S video jack (DCR-TRV22/TRV33 only) See page 45 for details. When using the i.LINK cable •Before recording, make sure if the DV IN indicator appears on the screen. The DV IN indicator may appear on both equipment. •Recording of only the picture - Sony TRV22 | Operating Instructions (primary manual) - Page 95
Inserting a scene from a VCR - Insert editing You can insert a new scene with sound from a VCR onto your originally recorded tape by specifying the insert start and end points. Use the Remote Commander for this operation. Connections are the same as on page 93. Insert a cassette - Sony TRV22 | Operating Instructions (primary manual) - Page 96
point [c], then set it to playback pause. (3) Press ZERO SET MEMORY on the Remote Commander. The ZERO SET MEMORY indicator flashes and the end point of the insert is stored in memory. The tape counter shows "0:00:00." (4) On your camcorder, locate the insert start point [b]. (5) Press FN and select - Sony TRV22 | Operating Instructions (primary manual) - Page 97
, you can add sound to your tape already recorded in the 12-bit mode order: • MIC jack • Intelligent accessory shoe • AUDIO/VIDEO jack (DCR-TRV22/TRV33 only) • Built-in microphone (PLUG IN POWER) : Signal flow You can check the recorded picture and sound by connecting the AUDIO/VIDEO jack to a - Sony TRV22 | Operating Instructions (primary manual) - Page 98
A/V connecting cable (supplied) Note When dubbing with the AUDIO/VIDEO jack (DCR-TRV22/TRV33 only) or the built-in microphone, pictures are not output through the S VIDEO jack or AUDIO/VIDEO jack. Check the recorded picture on the screen. You can check the recorded sound by using headphones. 98 - Sony TRV22 | Operating Instructions (primary manual) - Page 99
automatically stops at the point where ZERO SET MEMORY was pressed. We recommend that you add new sound on the tape recorded with your camcorder If you add new sound on the tape recorded with another camcorder (including other DCR-TRV19/TRV22/TRV33), the sound quality may become deteriorated. 99 - Sony TRV22 | Operating Instructions (primary manual) - Page 100
the new recorded sound The POWER switch should be set to . Operate by touching the panel. (1) Play back the tape on which you added audio. then press EXEC. About 5 minutes after you disconnect the power source or remove the battery pack, the setting of AUDIO MIX returns to the original sound - Sony TRV22 | Operating Instructions (primary manual) - Page 101
Memory capacity is as follows: - 6 date data (maximum) - 1 cassette label (maximum) - 12 photo data (maximum) (DCR-TRV19 only) The POWER switch playback, playback pause or recording: The TITLE SAVE indicator appears on the screen for about 5 seconds and the title is set. During recording standby: - Sony TRV22 | Operating Instructions (primary manual) - Page 102
Memory To use the custom title If you want to use the custom title, select in step 5. The titles superimposed with your camcorder •They appear only by DV format video . Erasing a title The POWER switch should be set to EXEC (p. 181). The TITLE ERASE screen appears. (4) Select the title you - Sony TRV22 | Operating Instructions (primary manual) - Page 103
new title. If you take 5 minutes or longer to enter characters during tape recording standby with the cassette inserted in your camcorder The power automatically goes off. The characters you have entered remain stored in memory. Set the POWER switch to OFF (CHG) once and then to CAMERA again, then - Sony TRV22 | Operating Instructions (primary manual) - Page 104
the label is displayed for about 5 seconds. The POWER switch should be set to Operate by touching the panel. or . (1) Insert the cassette with Cassette Memory you want to label. (2) Press FN to display PAGE1. (3) Press MENU to display the menu. (4) Select TAPE TITLE in , then press EXEC (p. 181 - Sony TRV22 | Operating Instructions (primary manual) - Page 105
Memory The following data saved in Cassette Memory can be completely erased at once: - Date data - Title data - Cassette label - Photo data (DCR-TRV19 only) The POWER the screen. Once erasing is complete, the COMPLETE indicator appears. 3 CM SET TITLE TITLEERASE TITLE DSPL CM SEARCH TAPE TITLE - Sony TRV22 | Operating Instructions (primary manual) - Page 106
Memory Stick" from the tape - Capturing images into the computer using the supplied USB cable - Image deletion, protection and writing (with a print mark). File format Still image (JPEG) Your camcorder : This file name appears on the screen of your camcorder. DSC00001.JPG:This file name appears - Sony TRV22 | Operating Instructions (primary manual) - Page 107
"Memory Stick" Operations (DCR-TRV22/TRV33 only) Using "Memory Stick" Image data may be damaged in the following cases. (Damaged image data will not be compensated.) - You eject the "Memory Stick" or turn the power off when the data is being recorded or the image file is being read in the "Memory - Sony TRV22 | Operating Instructions (primary manual) - Page 108
to play back following images with your camcorder: - image data modified on a computer - image data shot with other equipment •The "Memory Stick," and "MagicGate Memory Stick" are trademarks of Sony Corporation. •"Memory Stick Duo" and are trademarks of Sony Corporation. •"MagicGate" and are - Sony TRV22 | Operating Instructions (primary manual) - Page 109
lamp is lit or flashing Do not shake or strike your camcorder because your camcorder is reading the data from the "Memory Stick" or recording the data on the "Memory Stick." Do not turn the power off, eject the "Memory Stick" or remove the battery pack. Otherwise, image data breakdown may occur. If - Sony TRV22 | Operating Instructions (primary manual) - Page 110
Selecting image quality and size Selecting still image quality The default setting is FINE. The POWER switch should be set to Operate by touching the panel. or . (1) Press FN to display PAGE1. (2) Press MENU to display the menu. (3) Select STILL SET - Sony TRV22 | Operating Instructions (primary manual) - Page 111
"Memory Stick" Operations (DCR-TRV22/TRV33 only) Selecting image quality and size Selecting the still image size (DCR-TRV33 only) You can select image size 1152 × 864 or 640 × 480 (When the POWER switch is set to CAMERA or VCR, the image size is automatically set to 640 × 480.) The default - Sony TRV22 | Operating Instructions (primary manual) - Page 112
quality and size Selecting the moving picture size You can select picture size 320 × 240 or 160 × 112. The default setting is 320 × 240. The POWER switch should be set to Operate by touching the panel. or . (1) Press FN to display PAGE1. (2) Press MENU to display the menu. (3) Select MOVIE SET - Sony TRV22 | Operating Instructions (primary manual) - Page 113
"Memory Stick" Operations (DCR-TRV22/TRV33 only) Selecting image quality and size Approximate number of still images and time of moving pictures that can be recorded on one "Memory Stick" The time of moving pictures that can be recorded on the "Memory Stick" formatted with your camcorder. 113 - Sony TRV22 | Operating Instructions (primary manual) - Page 114
images on "Memory Stick" - Memory Photo recording The POWER switch should be set to . (1) Keep pressing PHOTO lightly and check the image. The green z indicator stops flashing, then lights up. The brightness of the image and the focus are adjusted and fixed while your camcorder targets at the - Sony TRV22 | Operating Instructions (primary manual) - Page 115
Memory Stick" Operations (DCR-TRV22/TRV33 only) Recording still images on "Memory Stick" - Memory Photo recording When the POWER switch is set to MEMORY off the power or press PHOTO. When you press PHOTO on the Remote Commander Your camcorder immediately records the image that is on the screen when - Sony TRV22 | Operating Instructions (primary manual) - Page 116
Recording still images on "Memory Stick" - Memory Photo recording Recording images continuously (DCR-TRV33 only) You can record still images continuously. Before recording, select a desired mode described below in the menu settings. NORMAL [a] ( ) Your camcorder shoots up to 4 still images in 1152 - Sony TRV22 | Operating Instructions (primary manual) - Page 117
"Memory Stick" Operations (DCR-TRV22/TRV33 only) Recording still images on "Memory Stick" - Memory Photo recording The number of still images in continuous shooting The number of still images you can shoot continuously varies depending on the image size and the capacity of the "Memory Stick." - Sony TRV22 | Operating Instructions (primary manual) - Page 118
the "Memory Stick" and the recorded tape into your camcorder. The POWER switch should be set to . Operate by touching the panel. (1) Press . The picture recorded on the tape is played back. (2) Keep pressing PHOTO lightly and check the image. The picture from the tape freezes and the CAPTURE - Sony TRV22 | Operating Instructions (primary manual) - Page 119
where you want to record, follow steps 2 and 3 on page 118. Note If the tape is in poor condition due to being used repeatedly for dubbing and so on, your camcorder may not be able to record the image, or the recorded image may appear jagged. "Memory Stick" Operations (DCR-TRV22/TRV33 only) 119 - Sony TRV22 | Operating Instructions (primary manual) - Page 120
picture will be swapped with a still image. M. OVERLAP (Memory Overlap) You can make a moving picture you are recording with your camcorder fade in on top of a still image recorded on the "Memory Stick." You can use Memory Overlap only when the POWER switch is set to CAMERA. 120 M. CHROM M CAM - Sony TRV22 | Operating Instructions (primary manual) - Page 121
into your camcorder. •Insert the tape for recording into your camcorder. The POWER switch should be set to . Operate by touching the panel. (1) Press FN and select PAGE2 . (2) Press MEM MIX. The image recorded on the "Memory Stick" appears in the lower right corner of the screen. (3) Press - (to - Sony TRV22 | Operating Instructions (primary manual) - Page 122
Superimposing a still image in "Memory Stick" on an image - MEMORY MIX 2 MEM MIX MEM MIX OFF MCCAM OVER- LUMI LAP the mode. To record still image as they appear on the tape Select M. LUMI, then press -/+ in the lower left corner of the screen so that the right end of the bar is visible. When you - Sony TRV22 | Operating Instructions (primary manual) - Page 123
PAGE2. Image size of still images Image size is automatically set to 640 × 480. To record still image as they appear on the tape Select M. LUMI, then press -/+ in the lower left corner of the screen so that the right end of the bar is visible. "Memory Stick" Operations (DCR-TRV22/TRV33 only) 123 - Sony TRV22 | Operating Instructions (primary manual) - Page 124
the camcorder to automatically record still images. Example [a] [a] [a] [b] [b] [a] Memory Photo recording [b] INTERVAL The POWER switch should Photo Recording starts. The INTERVAL MEM STILL indicator lights up on the screen during Interval Photo Recording. PHOTO 4 MEM SET 2 INT. R -STL - Sony TRV22 | Operating Instructions (primary manual) - Page 125
"Memory Stick" Operations (DCR-TRV22/TRV33 only) Recording moving pictures on "Memory Stick" - MPEG MOVIE recording The picture and sound are recorded up to the full capacity of the "Memory Stick" (MPEG MOVIE EX). The POWER switch should be set to . Press START/STOP. Your camcorder starts - Sony TRV22 | Operating Instructions (primary manual) - Page 126
" - MPEG MOVIE recording When using an external flash (optional) Turn the power of the external flash off when recording moving pictures on the "Memory Stick." Otherwise, the charging sound of the flash may be recorded. Recording date/time The date/time do not appear during recording. However, they - Sony TRV22 | Operating Instructions (primary manual) - Page 127
standby, press SELFTIMER and the (self-timer) indicator disappears from the screen. You cannot cancel the self-timer using the Remote Commander. Notes images. When the POWER switch is set to CAMERA You can also perform self-timer recording (p. 50). "Memory Stick" Operations (DCR-TRV22/TRV33 only) - Sony TRV22 | Operating Instructions (primary manual) - Page 128
as a moving picture Before operation Insert the recorded cassette and "Memory Stick" into your camcorder. The POWER switch should be set to . Operate by touching the panel. (1) Press . The picture recorded on the tape is played back. (2) Press again to pause playback at the scene where you want - Sony TRV22 | Operating Instructions (primary manual) - Page 129
when: -There are blank portions on the tape. - The tape on which the image you want to use was recorded, is in poor condition. For example, if the tape has been repeatedly used for dubbing. - The input signal is cut off during recording. "Memory Stick" Operations (DCR-TRV22/TRV33 only) 129 - Sony TRV22 | Operating Instructions (primary manual) - Page 130
onto the "Memory Stick." Making the program The POWER switch should be set to . Operate by touching the panel. (1) Insert the tape for playback, and the "Memory Stick" for recording into your camcorder. (2) Press FN to display PAGE1. (3) Press MENU to display the menu. (4) Select VIDEO EDIT in - Sony TRV22 | Operating Instructions (primary manual) - Page 131
"Memory Stick" Operations (DCR-TRV22/TRV33 only) Recording edited pictures from tape as a moving picture - Digital program editing (on "Memory Stick") During making a program If you eject the cassette, the NOT READY indicator appears on the screen. The program will be erased. Erasing the program - Sony TRV22 | Operating Instructions (primary manual) - Page 132
stop dubbing Press CANCEL. The program you made is recorded on the "Memory Stick" up to the place where you pressed CANCEL. To end Digital program editing Your camcorder stops when the dubbing ends. Then the display returns to VIDEO EDIT in the menu settings. Press END to end Digital program editing - Sony TRV22 | Operating Instructions (primary manual) - Page 133
folder is "101MSDCF." You can create folders up to "999MSDCF" in the "Memory Stick." Creating a new folder The POWER switch should be set to . Operate by touching the panel. (1) Press FN folder Select RETURN in step 4, then press EXEC. "Memory Stick" Operations (DCR-TRV22/TRV33 only) 133 - Sony TRV22 | Operating Instructions (primary manual) - Page 134
Changing the recording folder Selecting the recording folder The POWER switch should be set to . Operate by touching the panel. a folder is created, it cannot be deleted with your camcorder. •As the number of folders increases, the number of recordable images in the "Memory Stick" decreases. 134 - Sony TRV22 | Operating Instructions (primary manual) - Page 135
Memory Stick" by selecting the index screen. The POWER switch should be set to . Operate by touching the panel. (1) Press PLAY. The last recorded image is displayed. (2) Press - (to see the previous image)/+ (to see the next image) on your camcorder "Memory Stick" Operations (DCR-TRV22/TRV33 - Sony TRV22 | Operating Instructions (primary manual) - Page 136
Viewing a still image - Memory Photo playback Playing back 6 recorded images at a time (index screen) This function is especially useful when searching for a particular image. Press INDEX to display the index screen. A red B mark appears above the image that was being displayed before the change - Sony TRV22 | Operating Instructions (primary manual) - Page 137
Memory Stick" Operations (DCR-TRV22/TRV33 only) Viewing a moving picture - MPEG MOVIE playback You can view the moving pictures recorded in the "Memory Sitck." The POWER steps below. 1 Press FN and select PAGE3. 2 Press VOL. The screen to adjust volume appears. 3 Press - (to turn down the volume - Sony TRV22 | Operating Instructions (primary manual) - Page 138
during moving picture playback To make screen indicators appear or disappear, press DSPL/BATT INFO. Image size 320 MO V 0 0 0 0 8 MPEG N X 8 / 8 101 0:00:12 Picture number/Total number of recorded pictures in the current playback folder Folder name Memory playback time JUL 4 2003 12:05 - Sony TRV22 | Operating Instructions (primary manual) - Page 139
camcorder does not recognize folder names created or changed using the computer. Current playback folder The current playback folder is valid until the next recording is made. Once you record an image, the current recording folder becomes the current playback folder. "Memory Stick" Operations (DCR - Sony TRV22 | Operating Instructions (primary manual) - Page 140
the enlarged images on the "Memory Stick" (DCR-TRV33 only). Image size is automatically set to 640 × 480. The POWER switch should be set to screen. Moving pictures recorded on the "Memory Stick" Memory PB ZOOM does not work. To record the images processed by Memory PB ZOOM on the "Memory Stick" (DCR - Sony TRV22 | Operating Instructions (primary manual) - Page 141
Memory Stick" Operations (DCR-TRV22/TRV33 only) Playing back images continuously - Slide show You can display all images on the "Memory Stick" or in the selected folder in sequence (slide show). The POWER START. Your camcorder plays back the images recorded on the "Memory Stick" in sequence. - Sony TRV22 | Operating Instructions (primary manual) - Page 142
POWER switch should be set to . Operate by touching the panel. (1) Press INDEX to display the index screen. (2) Press - MARK. The screen "Memory Stick," including the protected image data. Check the contents of the "Memory Stick" before formatting. If the write-protect tab on the "Memory Stick" - Sony TRV22 | Operating Instructions (primary manual) - Page 143
"Memory Stick" Operations (DCR-TRV22/TRV33 only) Deleting images - DELETE You can delete all images or selected images. Deleting selected images The POWER switch should be set to . Operate by touching the panel. (1) Play back the image you want to delete. (2) Press FN to display PAGE1. (3) - Sony TRV22 | Operating Instructions (primary manual) - Page 144
Deleting images - DELETE Deleting selected images on the index screen The POWER switch should be set to . Operate by touching the panel. (1) Press INDEX to display the index screen. (2) Press DEL. Then press the image you want to delete. The number of the selected image is highlighted. (3) - Sony TRV22 | Operating Instructions (primary manual) - Page 145
"Memory Stick" Operations (DCR-TRV22/TRV33 only) Deleting images - DELETE Deleting all the images You can delete all the unprotected images in the "Memory Stick." The POWER switch should be set to . Operate by touching the panel. (1) Press FN to display PAGE1. (2) Press MENU to display the - Sony TRV22 | Operating Instructions (primary manual) - Page 146
(DCR- POWER switch should be set to . Operate by touching the panel. (1) During memory playback, press FN and select PAGE2. (2) Press RESIZE. The RESIZE screen camcorder. •You cannot select an image quality level (FINE or STANDARD) for resized pictures. Size of a resized image Image size Memory - Sony TRV22 | Operating Instructions (primary manual) - Page 147
"Memory Stick" Operations (DCR-TRV22/TRV33 only) Writing a print mark - Print mark The print mark function is useful for printing out still images later. However you cannot set the number of printing. Your camcorder conforms with the DPOF (Digital Print Order Format) standard for specifying the - Sony TRV22 | Operating Instructions (primary manual) - Page 148
(DCR-TRV22/TRV33 only). Tape image/live from your camcorder "Memory Stick" image (DCRTRV22/TRV33 only) Camcorder connection jack USB jack DV Interface USB jack Connection cable USB cable (supplied) Computer environment requirements USB port, editing software Reference pages For For Windows - Sony TRV22 | Operating Instructions (primary manual) - Page 149
software installed that can read video signals. Computer Plug with mark facing up. Viewing images with your computer DV Interface i.LINK cable (optional) i.LINK : Signal flow Viewing images recorded on the "Memory Stick" (DCR-TRV22/ TRV33 only) When connecting to a computer with the USB - Sony TRV22 | Operating Instructions (primary manual) - Page 150
your computer "Memory Stick" (DCR-TRV22/TRV33 only) •"Memory Stick" operations on your camcorder cannot be assured if a "Memory Stick" formatted on your computer is used on your camcorder, or if the "Memory Stick" in your camcorder was formatted from your computer when the USB cable was connected - Sony TRV22 | Operating Instructions (primary manual) - Page 151
tape on a computer (USB Streaming function). Furthermore, if you download pictures from your camcorder to a computer, you can process or edit them in image processing software and attach them to e-mail. You can view images recorded on the "Memory Stick" on a computer (DCR-TRV22 is running Windows 98, - Sony TRV22 | Operating Instructions (primary manual) - Page 152
your camcorder to a computer using the USB cable (For Windows users) Recommended computer usage environment when connecting with USB cable and viewing the "Memory Stick" images on a computer (DCR-TRV22/TRV33 only) Recommended Windows environment OS: Microsoft Windows 98, Windows 98SE, Windows - Sony TRV22 | Operating Instructions (primary manual) - Page 153
software starts up. If the screen does not appear, double-click "My Computer" and then "ImageMixer" (CD-ROM Drive). (3) Select "Handycam" on the screen. Click The title screen appears. (4) Move the cursor to "USB Driver" and click. This starts USB driver installation. Click (5) Follow the on-screen - Sony TRV22 | Operating Instructions (primary manual) - Page 154
computer environment. Installing Image Transfer (DCR-TRV22/TRV33 only) Make sure USB driver installation is complete. This function enables image data recorded on the "Memory Stick" to be automatically transferred (copied) to your computer. If you are using Windows 2000, log in with permission of - Sony TRV22 | Operating Instructions (primary manual) - Page 155
Connecting your camcorder to a computer using the USB cable (For Windows users) Installing ImageMixer Make sure USB driver installation is complete. "ImageMixer Ver. 1.5 for Sony" is an application that can capture or edit images, or create video CDs. To install and use this software in Windows 2000 - Sony TRV22 | Operating Instructions (primary manual) - Page 156
If you are using Windows XP, log in with permission of computer administrators. Viewing pictures recorded on the tape (1) Connect the AC Adaptor to your camcorder. (2) Set the POWER switch to . (3) Press FN to display PAGE1. (4) Press MENU to display the menu. (5) Select USB STREAM in , then - Sony TRV22 | Operating Instructions (primary manual) - Page 157
computer using the USB cable (For Windows users) Viewing images recorded on the "Memory Stick" (DCR-TRV22/ TRV33 only) (1) Insert the "Memory Stick" into your camcorder. (2) Connect the AC Adaptor, then set the POWER switch to . (3) Connect the (USB) jack on your camcorder to the USB port on the - Sony TRV22 | Operating Instructions (primary manual) - Page 158
pictures recorded on the tape Step 1: Uninstall the incorrect USB driver 1 Turn on the computer and allow Windows to load. 2 Connect the AC Adaptor and set the POWER switch to . 3 Connect the USB port on the computer to the (USB) jack on your camcorder using the USB cable supplied. 4 Open the - Sony TRV22 | Operating Instructions (primary manual) - Page 159
to a computer using the USB cable (For Windows users) Viewing images with your computer Windows 2000 Windows XP 6 Set the POWER switch to OFF (CHG) on your camcorder, then disconnect the USB cable. 7 Restart the computer. Step 2: Install the USB driver on the supplied CD-ROM Follow the entire - Sony TRV22 | Operating Instructions (primary manual) - Page 160
the USB cable (For Windows users) Viewing images recorded on the "Memory Stick" (DCR-TRV22/ TRV33 only) Step1: Uninstall the incorrect USB driver 1 Turn on the computer and allow Windows to load. 2 Insert the "Memory Stick" into your camcorder. 3 Connect the AC Adaptor and set the POWER switch - Sony TRV22 | Operating Instructions (primary manual) - Page 161
install the USB driver and ImageMixer to view pictures recorded on the tape on a computer (p. 153, 155). Viewing pictures recorded on the tape (1) Turn on the computer and allow Windows to load. (2) Connect the AC Adaptor, then insert the cassette into your camcorder. (3) Set the POWER switch to - Sony TRV22 | Operating Instructions (primary manual) - Page 162
operations with the buttons on the screen. The picture from the tape appears on the monitor window on the computer. Monitor window Video control buttons Viewing pictures live from your camcorder (1) Follow the step 1 and 2 on page 161. (2) Set the POWER switch to . (3) Follow the step 4 to - Sony TRV22 | Operating Instructions (primary manual) - Page 163
tape on a computer - USB Streaming (For Windows users) Capturing still images Monitor window Thumbnail list window Viewing images with your computer (1) Click . (2) Looking at the monitor window, move the cursor to point you want to capture. The still image on the screen is captured. Captured - Sony TRV22 | Operating Instructions (primary manual) - Page 164
window to the left, although this reduces the picture quality. •You cannot carry out any "Memory Stick" operations during the USB Streaming. If image data cannot be transferred by the USB connection The USB driver has been registered incorrectly as the computer was connected to your camcorder - Sony TRV22 | Operating Instructions (primary manual) - Page 165
pictures recorded on tape on a computer - USB Streaming (For Windows users) Making Video CDs - Easy Video CD This function makes it simple to create a video CD by capturing images recorded on a tape or images live from your camcorder. Capturing images recorded on a tape onto a CD-R (1) Follow - Sony TRV22 | Operating Instructions (primary manual) - Page 166
Viewing pictures recorded on tape on a computer - USB Streaming (For Windows users) Notes •A computer equipped with a CD-R drive is required. •Do not press the button on your camcorder while creating a Video CD. If you press , only images up to that point are captured onto the Video CD and Easy Vide - Sony TRV22 | Operating Instructions (primary manual) - Page 167
(p. 153). (1) Turn on your computer and allow Windows to load. (2) Insert the "Memory Stick" into your camcorder, then connect the AC Adaptor to your camcorder. (3) Set the POWER switch to . (4) Connect the (USB) jack on your camcorder to the USB port on the computer using the supplied - Sony TRV22 | Operating Instructions (primary manual) - Page 168
environment. (1) Turn on the computer and allow Windows to load. (2) Insert the "Memory Stick" into your camcorder, then connect the AC Adaptor to your camcorder. (3) Set the POWER switch to . (4) Connect the (USB) jack on your camcorder to the USB port on the computer using the supplied - Sony TRV22 | Operating Instructions (primary manual) - Page 169
with your computer Viewing images recorded on "Memory Stick" on a computer (For Windows users) (DCR-TRV22/TRV33 only) Image file storage destinations and image files Image files recorded with your camcorder are grouped according to the folders in the "Memory Stick." The meanings of the file names - Sony TRV22 | Operating Instructions (primary manual) - Page 170
Macintosh users) (DCR-TRV22/TRV33 only) When connecting to a computer with the USB cable You must install a USB driver onto a computer in order to connect your camcorder to the computer's USB port. The USB driver can be found on the CD-ROM supplied, along with the application software required for - Sony TRV22 | Operating Instructions (primary manual) - Page 171
software screen appears. (3) Select "Handycam" on the screen. The title screen appears. (4) Click the "USB Driver" to open the folder containing the six files related to "Driver." Click (5) Select the following two files, and drag and drop them into the System Folder. •Sony Camcorder USB Driver - Sony TRV22 | Operating Instructions (primary manual) - Page 172
load. (2) Insert the "Memory Stick" into your camcorder, then connect the AC Adaptor to your camcorder. (3) Set the POWER switch to . (4) Connect the (USB) jack on your camcorder to the USB port on the computer using the supplied USB cable. The USB MODE indicator appears on the screen of your - Sony TRV22 | Operating Instructions (primary manual) - Page 173
computer - Signal convert function (DCR-TRV22/TRV33 only) You can capture images and sound from an analog video unit connected to a computer which has the DV port via your camcorder. Before operation Set DISPLAY in to LCD in the menu settings. (The default setting is LCD.) The POWER switch should - Sony TRV22 | Operating Instructions (primary manual) - Page 174
unit on a computer - Signal convert function (DCR-TRV22/TRV33 only) After capturing images and sound Stop capturing procedures on the computer, and stop playback on the analog video unit. Notes •You need the software and computer that support the exchange of digital video signals. •Depending on the - Sony TRV22 | Operating Instructions (primary manual) - Page 175
the menu item and the mode. The POWER switch should be set to TRV22/TRV33 only). Operate by touching the panel. , or (DCR- (1) Press FN to display PAGE1. FLASH LVL WHT BAL AUTO SHTR EXEC VCR MANUAL SET P EFFECT RET. EXIT EXEC RET. MEMORY * MANUAL SET EXIT PROGRAM AE FLASH MODE FLASH - Sony TRV22 | Operating Instructions (primary manual) - Page 176
icons: MANUAL SET CAMERA SET VCR SET LCD/VF SET MEM SET 1 (DCR-TRV22/TRV33 only) MEM SET 2 (DCR-TRV22/TRV33 only) CM SET TAPE SET SETUP MENU OTHERS Selecting the mode setting of each item z is the default setting. Menu items differ depending on the position of the POWER switch. The screen shows - Sony TRV22 | Operating Instructions (primary manual) - Page 177
z OFF ON z ON OFF EDITSEARCH N.S. LIGHT z OFF ON z ON OFF Meaning POWER switch To deactivate the digital zoom. Up to 10× zoom is carried out. To activate screen To display 7/- · + on the LCD screen (p. 38) To use the NightShot Light (p. 34) To cancel the NightShot Light * * DCR-TRV22/ - Sony TRV22 | Operating Instructions (primary manual) - Page 178
to normal BRIGHT To brighten the viewfinder screen * * DCR-TRV22/TRV33 only Notes on LCD B.L. and VF B.L. •When you select BRIGHT, battery life is reduced by about 10 percent during recording. •When you use power sources other than the battery pack, BRIGHT is automatically selected. Even if - Sony TRV22 | Operating Instructions (primary manual) - Page 179
Changing the menu settings Customizing Your Camcorder Icon/item MEM SET 1* STILL SET BURST** Mode z OFF NORMAL EXP . To reset the file numbering sequence each time the "Memory Stick" is changed POWER switch * DCR-TRV22/TRV33 only ** DCR-TRV33 only When you select image quality The number of - Sony TRV22 | Operating Instructions (primary manual) - Page 180
* DCR-TRV22/TRV33 only ** The folder name is displayed in sss. Notes on formatting •Do not do any of the following while the FORMATTING indicator appears: - Turn the POWER switch to the other position - Operate buttons - Eject the "Memory Stick" •The "Memory Stick" supplied with your camcorder has - Sony TRV22 | Operating Instructions (primary manual) - Page 181
TITLE TITLEERASE TITLE DSPL CM SEARCH TAPE TITLE ERASE ALL Mode -- -- z ON OFF z ON OFF -- z RETURN OK Meaning POWER switch To superimpose a title or the title (p. 102) To search using Cassette Memory (p. 76, 77, 79) To search without using Cassette Memory (p. 78, 79) To label the cassette (p. - Sony TRV22 | Operating Instructions (primary manual) - Page 182
in the LP mode on your camcorder, we recommend playing back the tape on your camcorder. When you play back the tape on other camcorders or VCRs, noise may occur in pictures or sound. •When you record in the LP mode, we recommend using a Sony Excellence/Master mini DV cassette so that you can get - Sony TRV22 | Operating Instructions (primary manual) - Page 183
the demonstration mode POWER switch * * * DCR-TRV22/TRV33 only Notes on DEMO MODE •You cannot select DEMO MODE when the cassette or the "Memory Stick" (DCR- TRV22/TRV33 only) is inserted in your camcorder. •When NIGHTSHOT is slid to ON, the "NIGHTSHOT" indicator appears on the screen and you - Sony TRV22 | Operating Instructions (primary manual) - Page 184
Icon/item Mode Meaning POWER switch OTHERS DATA CODE screen, LCD screen * and viewfinder * DCR-TRV22/TRV33 only Note If you press DSPL/BATT INFO with DISPLAY set to V-OUT/LCD in the menu settings, the picture from a TV or VCR will not appear on the LCD screen even when your camcorder - Sony TRV22 | Operating Instructions (primary manual) - Page 185
Digital program editing on the tape (p. 85) MEMORY* To make programs and perform Digital program editing on the "Memory Stick" (p. 130) * DCR-TRV22/TRV33 only When recording a close subject When REC LAMP is set to ON, the red camera recording lamp on the front of your camcorder may reflect on the - Sony TRV22 | Operating Instructions (primary manual) - Page 186
- Types of trouble and how to correct trouble If you run into any problem using your camcorder, use the following table to troubleshoot the problem. If the problem persists, disconnect the power source and contact your Sony dealer. If "C:ss:ss" appears on the screen, the self-diagnosis - Sony TRV22 | Operating Instructions (primary manual) - Page 187
elapse after you set the POWER switch to CAMERA or DEMO MODE is set to ON in the menu settings without a cassette and the "Memory Stick"* inserted, your camcorder automatically starts the demonstration. c Insert a cassette/a "Memory Stick"* or press the LCD screen. The demonstration stops. You can - Sony TRV22 | Operating Instructions (primary manual) - Page 188
to correct trouble During playback Symptom Cause and/or Corrective Actions Playback is not possible. • The tape has run out. c Rewind the tape (p. 39). There are horizontal lines on the picture or the playback picture is not clear or does not appear. • The video head may be dirty. c Clean the - Sony TRV22 | Operating Instructions (primary manual) - Page 189
Symptom Cause and/or Corrective Actions The power does not turn on. • The battery pack is not installed, or is dead or nearly dead. c Install a charged battery pack (p. 16, 17). • The AC Adaptor is not connected to a wall outlet. c Connect the AC Adaptor to a wall outlet (p. 8). End search does - Sony TRV22 | Operating Instructions (primary manual) - Page 190
and how to correct trouble When operating using the "Memory Stick" (DCR-TRV22/TRV33 only) Symptom The "Memory Stick" does not function. Recording does not function. The image cannot be deleted. You cannot format the "Memory Stick." Deleting all the images cannot be carried out. You cannot protect - Sony TRV22 | Operating Instructions (primary manual) - Page 191
and how to correct trouble Symptom You cannot write a print mark on the still image. You cannot resize the image. (DCR-TRV33 only) You cannot play back images in actual size. You cannot play back image data. Cause and/or Corrective Actions • The write-protect tab on the "Memory Stick" is set to - Sony TRV22 | Operating Instructions (primary manual) - Page 192
editing to the • Setting program on a blank portion of the tape is "Memory Stick" does not function. attempted. (DCR-TRV22/TRV33 only) c Set the program again on a recorded portion (p. 130). The Remote Commander supplied with your camcorder does not work. • COMMANDER is set to OFF in the menu - Sony TRV22 | Operating Instructions (primary manual) - Page 193
. c Remove the cassette and insert it again, then operate your camcorder. No function works though the power is on. c Disconnect the AC Adaptor from a wall outlet or remove the battery pack, then reconnect it in about 1 minute. Turn the power on. If the functions still do not work, press the RESET - Sony TRV22 | Operating Instructions (primary manual) - Page 194
205). c Disconnect the power cord of the AC Adaptor or remove the battery pack. After reconnecting the power source, operate your camcorder. c Replace the cassette. • A malfunction that you cannot service has occurred. c Contact your Sony dealer or local authorized Sony service facility and inform - Sony TRV22 | Operating Instructions (primary manual) - Page 195
). Warning indicator as to still image recording Slow flashing: • The still image cannot be recorded on the "Memory Stick" (p. 47).2) • The still image cannot be recorded on the tape (p. 48).3) 1) You hear the melody or beep sound. 2) DCR-TRV22/TRV33 only 3) DCR-TRV19 only 195 Troubleshooting - Sony TRV22 | Operating Instructions (primary manual) - Page 196
played back.1) 2) • REC ERROR3) Turn the power off once, then on again.1) • INCOMPATIBLE MEMORY STICK3) The "Memory Stick" inserted is not compatible with your camcorder.1) • READ-ONLY MEMORY STICK3) A read-only "Memory Stick" is inserted.1) • Q Z TAPE END The tape has reached the end of the - Sony TRV22 | Operating Instructions (primary manual) - Page 197
the Mini DV mark. This is the Cassette Memory mark. These are trademarks. Copyright signal When you play back If the tape you play back on your camcorder contains copyright signals, you cannot copy it with another video camera connected to your camcorder. When you record You cannot record software - Sony TRV22 | Operating Instructions (primary manual) - Page 198
tape recorded in the 16-bit mode, the 16BIT indicator appears on the screen. When you play back a dual sound track tape When you play back a dual sound track tape of your camcorder. Do not affix a label around this border. 198 [a] After using the cassette Rewind the tape to the beginning - Sony TRV22 | Operating Instructions (primary manual) - Page 199
Usable cassettes When the Cassette Memory function does not work Reinsert a cassette. The gold-plated connector of mini DV cassettes may be dirty or dusty. Cleaning gold-plated connector If the gold-plated connector on the cassette is dirty or dusty, the remaining tape indicator sometimes does not - Sony TRV22 | Operating Instructions (primary manual) - Page 200
conditions between your camcorder and an optional AC adaptor/charger. The "InfoLITHIUM" battery pack calculates the power consumption according to the operating conditions of your camcorder, and displays the remaining battery time in minutes. With an AC adaptor/charger (optional), the remaining - Sony TRV22 | Operating Instructions (primary manual) - Page 201
and store it in a dry, cool place. • To use the battery pack up on your camcorder, leave your camcorder during tape recording standby until the power goes off without a cassette inserted. Battery life • The battery life is limited. Battery capacity drops little by little as you use it more and more - Sony TRV22 | Operating Instructions (primary manual) - Page 202
DV Interface. This section describes the i.LINK standard and its features. What is i.LINK? i.LINK is a digital serial interface for handling digital video to i.LINK-compatible equipment having 2 or more DV Interfaces, refer to the operating instructions of the equipment to be connected. About the - Sony TRV22 | Operating Instructions (primary manual) - Page 203
unit can also be connected to other i.LINK (DV Interface) compatible equipment made by Sony (e.g. VAIO series personal computer) other than video equipment. Before connecting this unit to your computer, make sure that application software supported by this unit is already installed on your computer - Sony TRV22 | Operating Instructions (primary manual) - Page 204
a commercially available AC plug adaptor [a], if necessary, depending on the design of the wall outlet [b]. AC-L15A/L15B [a] [b] Your camcorder is an NTSC system based camcorder. If you want to view the playback picture on a TV, it must be an NTSC system based TV with the AUDIO/VIDEO input jack - Sony TRV22 | Operating Instructions (primary manual) - Page 205
your camcorder, on the surface of the tape, or on the lens. In this condition, the tape may stick to the head drum and be damaged or your camcorder camcorder can be used again if the % or Z indicator does not appear when the power is turned on again. If moisture starts to condense, your camcorder - Sony TRV22 | Operating Instructions (primary manual) - Page 206
. Please contact your Sony dealer or local authorized Sony service facility to have the video head replaced. Cleaning the LCD screen If fingerprints or dust make the LCD screen dirty, we recommend using a cleaning cloth (supplied) to clean the LCD screen. When you use the LCD Cleaning Kit (optional - Sony TRV22 | Operating Instructions (primary manual) - Page 207
To retain the date and time, etc., charge the battery if the battery is discharged. Charging the built-in rechargeable battery •Connect your camcorder to the house current using the AC Adaptor supplied with your camcorder, and leave your camcorder with the POWER switch set to OFF (CHG) for more than - Sony TRV22 | Operating Instructions (primary manual) - Page 208
operation •Operate your camcorder on 7.2 V (battery pack) or 8.4 V (AC Adaptor). •For DC or AC operation, use the accessories recommended in this operating instructions. •If any solid object or liquid get inside the casing, unplug your camcorder and have it checked by a Sony dealer before operating - Sony TRV22 | Operating Instructions (primary manual) - Page 209
Information Maintenance information and precautions AC Adaptor • Unplug the unit from a wall outlet when you are not using the unit for a long time. To disconnect the power cord, pull it out by the plug. Never pull the power cord itself. • Do not operate the unit with a damaged cord or if the unit - Sony TRV22 | Operating Instructions (primary manual) - Page 210
in the battery compartment carefully before replacing the batteries. •If you touch the liquid, wash it off with water. •If the liquid get into your eyes, wash your eyes with a lot of water and then consult a doctor. If any problem occurs, unplug your camcorder and contact your nearest Sony dealer - Sony TRV22 | Operating Instructions (primary manual) - Page 211
Mini DV cassette with the mark printed Tape speed SP: Approx. 18.81 mm/s LP: Approx. 12.56 mm/s Recording/playback time (using cassette DVM60) SP: 1 hour LP: 1.5 hours Fastforward/rewind time (using cassette DVM60) Approx. 2 min. and 40 seconds Viewfinder Electric viewfinder DCR-TRV19: black - Sony TRV22 | Operating Instructions (primary manual) - Page 212
lb 2 oz) Including the rechargeable battery pack NP-FM30, cassette DVM60 and lens cap DCR-TRV19: 610 g (1 lb 5 oz) DCR-TRV22: 620 g (1 lb 5 oz) DCR-TRV33: 630 g (1 lb 5 oz) Supplied accessories See page 15. AC Adaptor AC-L15A/L15B Power requirements 100 - 240 V AC, 50/60 Hz Current consumption 0.35 - Sony TRV22 | Operating Instructions (primary manual) - Page 213
Identifying parts and controls Camcorder 7 1 8 9 2 q; 3 qa 4 5 qs 6 1 Lens cap (p. 25) 2 LCD/Touch panel screen (p. 23, 28, 206) 9 Viewfinder (p. 31) 0 START/STOP button (p. 9, 25, 125) qa Battery pack mounting surface (p. 16) qs Hooks for shoulder strap Attaching the supplied lens cap - Sony TRV22 | Operating Instructions (primary manual) - Page 214
qj wa ws qd POWER switch (p. 9, 11, 17) qf LOCK switch (DCR-TRV22/TRV33 only, p. 11) qg DC IN jack (p. 8, 10) qh BATT release button (p. 16) qj Viewfinder lens adjustment lever (p. 31) qk MEMORY EJECT knob (DCR-TRV22/ TRV33 only, p. 10, 109) ql "Memory Stick" slot (DCR-TRV22/ TRV33 only, p. 10 - Sony TRV22 | Operating Instructions (primary manual) - Page 215
•The intelligent accessory shoe supplies power to optional accessories such as a video light or microphone. •The intelligent accessory shoe is linked to the POWER switch, allowing you to turn the power supplied by the shoe on and off. Refer to the operating instructions of the accessory for details - Sony TRV22 | Operating Instructions (primary manual) - Page 216
PHOTO button (p. 11, 46, 114) ea Power zoom lever (p. 32, 74, 140) es (USB) jack (p. 148) ed DV Interface (p. 81, 93, 149) The DV Interface is i.LINK compatible. ef AUDIO/VIDEO jack (yellow) (DCRTRV22/TRV33 only, p. 44, 81, 93, 173) AUDIO/VIDEO OUT jack (yellow) (DCR-TRV19 only, p. 44, 81) eg Grip - Sony TRV22 | Operating Instructions (primary manual) - Page 217
toward the remote sensor to control your camcorder after turning on your camcorder. 7 ZERO SET MEMORY button (p. 75) 8 START/STOP button (p. 9, 25) 9 DATA CODE button (p. 40) q; Power zoom button (p. 32) To prepare the Remote Commander Insert 2 size AA (R6) batteries by matching the + and - on the - Sony TRV22 | Operating Instructions (primary manual) - Page 218
LCD screen and Viewfinder qd qf 1 qg 2 qh 3 qj 4 5 6 50min - STILL 16:9WIDE NEG. ART STBY + 0:12:34 48min ZERO SET MEMORY END SEARCH qk ql w; wa ws 7 8 AUTO 60 AWB F1.8 9dB DV IN 16BIT 12:05:56PM wd wf 9 wg 0 qa wh qs wj 218 1 Cassette Memory (p. 27) 2 Remaining battery - Sony TRV22 | Operating Instructions (primary manual) - Page 219
Rec Review 38 Recording time 19 Remaining battery time indicator 27 Remaining tape indicator ...... 27 Remote Commander 217 Remote sensor 215 RESET 193, 213 Resize 146 S S VIDEO ID-2 jack 54 Self-diagnosis display .......... 194 Self-timer recording ....... 50, 127 Signal convert function - Sony TRV22 | Operating Instructions (primary manual) - Page 220
Printed on 100% recycled paper using VOC (Volatile Organic Compound)-free vegetable oil based ink. Printed in Japan
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
-
79
-
80
-
81
-
82
-
83
-
84
-
85
-
86
-
87
-
88
-
89
-
90
-
91
-
92
-
93
-
94
-
95
-
96
-
97
-
98
-
99
-
100
-
101
-
102
-
103
-
104
-
105
-
106
-
107
-
108
-
109
-
110
-
111
-
112
-
113
-
114
-
115
-
116
-
117
-
118
-
119
-
120
-
121
-
122
-
123
-
124
-
125
-
126
-
127
-
128
-
129
-
130
-
131
-
132
-
133
-
134
-
135
-
136
-
137
-
138
-
139
-
140
-
141
-
142
-
143
-
144
-
145
-
146
-
147
-
148
-
149
-
150
-
151
-
152
-
153
-
154
-
155
-
156
-
157
-
158
-
159
-
160
-
161
-
162
-
163
-
164
-
165
-
166
-
167
-
168
-
169
-
170
-
171
-
172
-
173
-
174
-
175
-
176
-
177
-
178
-
179
-
180
-
181
-
182
-
183
-
184
-
185
-
186
-
187
-
188
-
189
-
190
-
191
-
192
-
193
-
194
-
195
-
196
-
197
-
198
-
199
-
200
-
201
-
202
-
203
-
204
-
205
-
206
-
207
-
208
-
209
-
210
-
211
-
212
-
213
-
214
-
215
-
216
-
217
-
218
-
219
-
220
 |
 |
3-080-369-
11
(1)
©2003 Sony Corporation
Operating Instructions
Before operating the unit, please read this manual thoroughly,
and retain it for future reference.
Owner’s Record
The model and serial numbers are located on the bottom. Record the
serial number in the space provided below. Refer to these numbers
whenever you call upon your Sony dealer regarding this product.
Model No.
DCR-TRV ____________________
Model No.
AC- ________________________
Serial No.
_____________________________
Serial No.
_____________________________
DCR-TRV19/TRV22/TRV33
Digital
Video Camera
Recorder
DCR-TRV33