Sony VPCJ118FX VPCJ1 Series Hard Disk Drive Replacement Instructions

VPCJ1 Series Hard Disk Drive

Replacement Instructions

P/N

989201986

Rev. B

1/3

Hard Drive

Assembly

Hard Drive Removal

(Steps 2-6)

Step 2.

Using the enclosed magnetic

screwdriver, remove the four (4) screws

securing the stand.

Put aside the Stand Screws

to re-

secure

the

Stand

later

in

the

procedure.

Prepare the Computer

CAUTION

:

Make

sure

the

computer is turned off, and the AC

Adapter is disconnected. Failure to do

so can result in damage to the

computer.

Step 1.

Place the computer upside down

on a protected surface with the front

edge facing you.

Step 3.

Grasp the stand handle and

pull upwards to remove the stand.

These easy instructions will guide you through the Hard Drive replacement process.

°

Before you begin, place your computer on a clean or covered surface to avoid damage to the

computer's case.*

°

Follow the ESD (Electrostatic Discharge) damage prevention instructions:

o

Hold parts by the edges, away from exposed circuitry when possible.

o

Do not walk around excessively as this promotes static build-up.

°

Before you begin, remove any jewelry you may be wearing to prevent scratches to the surface

of your computer.*

°

The appearance of the electronic components shown in the illustrations may differ from the

components shipped. This slight difference does not affect the accuracy of these instructions.

* Sony is not responsible for damage caused by incorrect handling of the computer.

IMPORTANT!

PLEASE READ BEFORE YOU START

Stand