Sony VPL-GTZ1/B Product Manual (VPL-GTZ1 Operation manual)

Sony VPL-GTZ1/B Manual

Sony VPL-GTZ1/B manual content summary:

  • Sony VPL-GTZ1/B | Product Manual (VPL-GTZ1 Operation manual) - Page 1
    4-547-802-11 (1) Data Projector Operating Instructions Before operating the unit, please read this manual and supplied Quick Reference Manual thoroughly and retain it for future reference. VPL-GTZ1 © 2014 Sony Corporation
  • Sony VPL-GTZ1/B | Product Manual (VPL-GTZ1 Operation manual) - Page 2
    Window ........41 Switching the Page 41 Setting the Access Limitation .....41 Confirming the Information Regarding the Unit 41 Error Handling Troubleshooting 42 About Indicators 45 Message Lists 46 Others Updating the Software 47 About x.v.Color 47 About the Simulated 3D Feature ......48
  • Sony VPL-GTZ1/B | Product Manual (VPL-GTZ1 Operation manual) - Page 3
    Index 79 Table of Contents 3
  • Sony VPL-GTZ1/B | Product Manual (VPL-GTZ1 Operation manual) - Page 4
    Location of Controls Front The buttons on the control panel function the same as those on the remote control. Connector Control panel Indicators and remote control detector a WARNING1 indicator (page 45) b LED indicator (page 9) c WARNING2 indicator (page 45) d Remote control detector (page 8)
  • Sony VPL-GTZ1/B | Product Manual (VPL-GTZ1 Operation manual) - Page 5
    Location of Controls Others k Ventilation holes (exhaust) l Ventilation holes (intake) Note If you look through the projection window (lens) while the unit is projecting, the light may damage your eyes. Take special caution when using the unit around children. Front 5
  • Sony VPL-GTZ1/B | Product Manual (VPL-GTZ1 Operation manual) - Page 6
    CAUTION For safety, do not connect the connector for peripheral device wiring that might have excessive voltage to this port. Follow the instructions for this port. Others f AC IN socket g Projection window (lens) Projects a video from this window. h Feet (adjustable) (page 13) i Ventilation holes
  • Sony VPL-GTZ1/B | Product Manual (VPL-GTZ1 Operation manual) - Page 7
    Location of Controls Remote Control a LIGHT button Illuminates the buttons on the remote control. b Infrared transmitter c ?/1 (ON/STANDBY) button (page 9) d INPUT button (page 16) e CALIBRATED PRESET buttons (page 21) f PATTERN button (page 10) g RESET button (page 23) h M/m/
  • Sony VPL-GTZ1/B | Product Manual (VPL-GTZ1 Operation manual) - Page 8
    Connections and Preparations This section describes how to install the unit, how to connect the equipment from which you want to project a picture, etc. Installing the Unit The installation distance between the unit and a projection surface varies depending on the projection size and whether or not
  • Sony VPL-GTZ1/B | Product Manual (VPL-GTZ1 Operation manual) - Page 9
    Connections and Preparations • When adjusting the lens, each time you press the LENS button on the unit, the lens adjustment function switches as follows. Note Depending on the installation location of the unit, you may not be able to control it with the remote control. In this case, point the
  • Sony VPL-GTZ1/B | Product Manual (VPL-GTZ1 Operation manual) - Page 10
    4 Press the PATTERN button repeatedly to display the ZOOM adjustment window, and adjust the size of the picture by pressing the M/m/
  • Sony VPL-GTZ1/B | Product Manual (VPL-GTZ1 Operation manual) - Page 11
    Connections and Preparations 7 Check if the upper side and lower side of the picture are parallel. If not, install the unit in a position parallel to the projection surface (a=b). Image distortion Installation state to the projection surface (Top view) a b a > b a b a < b 8 Check if the
  • Sony VPL-GTZ1/B | Product Manual (VPL-GTZ1 Operation manual) - Page 12
    9 Check if the left side and right side of the picture are vertical. If not, use the foreground feet (adjustable) to keep the unit vertical to the projection surface. For details of adjusting the feet, see page 13. Image distortion Installation state to the projection surface (Side view) Feet
  • Sony VPL-GTZ1/B | Product Manual (VPL-GTZ1 Operation manual) - Page 13
    when using multiple units in a line with a PC application. For more details, consult with qualified Sony personnel. • When multiple projectors are set up in a line, the temperature inside the projectors may increase due to exhaust vent proximity, and an error indication may result. In this case
  • Sony VPL-GTZ1/B | Product Manual (VPL-GTZ1 Operation manual) - Page 14
    to pull it out from the plug, not the cable itself. • Refer to the operating instructions of the connected equipment. Rear of the unit Front of the unit Equipment with HDMI output the cable type logo is specified. (Sony products are recommended.) 14 Connecting to Video Equipment or a Computer
  • Sony VPL-GTZ1/B | Product Manual (VPL-GTZ1 Operation manual) - Page 15
    . With a standard HDMI cable, images of 1080p, DeepColor, 3D video and 4K video may not be displayed properly. • When connecting an HDMI cable to the to only the external monitor. For details, refer to the operating instructions supplied with your computer. For settings of the computer, consult with
  • Sony VPL-GTZ1/B | Product Manual (VPL-GTZ1 Operation manual) - Page 16
    . Projecting This section describes how to operate the unit to view a picture from the equipment connected to the unit. It also describes how to adjust the quality of the picture to suit your taste. Projecting the Picture 1 Turn on both the unit and the equipment connected to the unit. 2 Press
  • Sony VPL-GTZ1/B | Product Manual (VPL-GTZ1 Operation manual) - Page 17
    For details on how to play 3D content, refer to the operating instructions for the connected equipment. 2 Turn on the unit and project the use Misoperation may occur if: • The viewing position is too far from the projector • There are other communication devices, such as a wireless LAN (IEEE802.11
  • Sony VPL-GTZ1/B | Product Manual (VPL-GTZ1 Operation manual) - Page 18
    ) 10 m (33 ft) 10 m (33 ft) Side view Projector Projection surface Projector 10 m (33 ft) 10 m (33 ft) Using the Picture stops. In this case, select the lens position again or adjust the lens manually. • The Picture Position function is not guaranteed to reproduce the lens settings precisely
  • Sony VPL-GTZ1/B | Product Manual (VPL-GTZ1 Operation manual) - Page 19
    Projecting Selecting the Aspect Ratio According to the Video Signal You can select an aspect ratio best suited for the video signal received. Press ASPECT. Each time you press the button, you can select the "Aspect" setting.You can also select it using the menu (page 31). ASPECT button Original
  • Sony VPL-GTZ1/B | Product Manual (VPL-GTZ1 Operation manual) - Page 20
    Original image (for 16:9 display) 1.78:1 (16:9) Recommended setting and resultant images Normal 1.33:1 (4:3) 1.33:1 (4:3) with side panels Stretch Squeezed Notes • Selectable aspect modes vary depending on the input signal (page 55). • The aspect cannot be selected when a computer signal is
  • Sony VPL-GTZ1/B | Product Manual (VPL-GTZ1 Operation manual) - Page 21
    Projecting Selecting the Picture Viewing Mode You can select the picture viewing mode that best suits the type of video source or room conditions. You can save and use different preset modes for 2D/3D respectively. Press one of the CALIBRATED PRESET buttons. CALIBRATED PRESET buttons Setting
  • Sony VPL-GTZ1/B | Product Manual (VPL-GTZ1 Operation manual) - Page 22
    Using the Menus This section describes how to make various adjustments and settings using the menus. Operation through the Menus The unit is equipped with an on-screen menu for making various adjustments and settings. If you select an item name followed by an arrow (B), the next menu window with
  • Sony VPL-GTZ1/B | Product Manual (VPL-GTZ1 Operation manual) - Page 23
    Setting menu To reset the picture that has been adjusted Select "Reset" from the Picture menu. Using the Menus Adjustment menu Next menu window Setting items 4 Make the setting or adjustment of an item. When changing the adjustment level To increase the value, press M/,. To decrease the value,
  • Sony VPL-GTZ1/B | Product Manual (VPL-GTZ1 Operation manual) - Page 24
    Picture Menu The Picture menu is used for adjusting the picture. Note These items may not be available, depending on the type of input signal. For details, see "Input Signals and Adjustment/Setting Items" (page 52). Item names in brackets represent those printed on the remote control. Setting
  • Sony VPL-GTZ1/B | Product Manual (VPL-GTZ1 Operation manual) - Page 25
    Using the Menus Setting items Reset Description Resets all currently selected Calib. Preset mode settings to their default values (page 23). Super Resolution Cinema Black Pro Laser Light Setting Tip Reset does not affect settings saved for the Custom 1 to 5 items of "Color Temp." Adjusts the
  • Sony VPL-GTZ1/B | Product Manual (VPL-GTZ1 Operation manual) - Page 26
    Setting items Color Hue Color Temp. [COLOR TEMP] Sharpness [SHARPNESS] Expert Setting NR (Noise Reduction) Description Adjusts the color density. The higher the setting, the greater the intensity. The lower the setting, the lower the intensity. Adjusts the color tone. The higher the setting, the
  • Sony VPL-GTZ1/B | Product Manual (VPL-GTZ1 Operation manual) - Page 27
    can adjust the "Clear White" effect. Off: The "Clear White" effect is not applied. Set this item when connecting the unit with equipment that supports x.v.Color and playing back an x.v.Color video signal. On: You can play back an x.v.Color video signal. Off: The "x.v.Color" function is not applied
  • Sony VPL-GTZ1/B | Product Manual (VPL-GTZ1 Operation manual) - Page 28
    Setting items Description Color Space [COLOR SPACE] Converts the color space. BT.709: An ITU-R BT.709 color space, which is used for highdefinition television broadcast or Blu-ray Disc. The color space is equivalent to sRGB. Color Space 1: The color space suited for watching TV programs and video
  • Sony VPL-GTZ1/B | Product Manual (VPL-GTZ1 Operation manual) - Page 29
    Advanced Picture Menu You can adjust the gaps in color that have occurred after a long period of use. Using the Menus Setting items Auto Calibration Description Pre Check: Checks the color difference against the factory default settings, before calibration starts. Adjust: Performs Auto
  • Sony VPL-GTZ1/B | Product Manual (VPL-GTZ1 Operation manual) - Page 30
    any button on the unit while the lens is moving, the lens stops. In this case, select the lens position again or adjust the lens manually. • When you use a 2.35:1 or a 16:9 subtended angle with the Picture Position function, make sure that the installation position is suitable (page 18). • The
  • Sony VPL-GTZ1/B | Product Manual (VPL-GTZ1 Operation manual) - Page 31
    Setting items Aspect [ASPECT] Description You can set the aspect ratio of the picture to be displayed for the current input signal (page 19). 1.85:1 Zoom: A 1.85:1 aspect ratio picture is displayed in its original aspect ratio, enlarged so that black bands do not appear at the top and bottom of the
  • Sony VPL-GTZ1/B | Product Manual (VPL-GTZ1 Operation manual) - Page 32
    ). • To turn on the power with the Remote Start function, a special command should be sent from a PC or a terminal. For details, consult with qualified Sony personnel. Note When the Remote Start is set to "On," the standby power requirement will increase. When Network Management is set to "On," the
  • Sony VPL-GTZ1/B | Product Manual (VPL-GTZ1 Operation manual) - Page 33
    Setting items Description Network Management On: Set when connected to the network and continuously communicating with the projector control equipment. Note When Network Management is set to "On," the network function is continuously enabled. Set Network Management to "Off" for normal use. If
  • Sony VPL-GTZ1/B | Product Manual (VPL-GTZ1 Operation manual) - Page 34
    Function Menu The Function menu is used for changing the settings of the various functions of the unit. Setting items 3D Settings 2D-3D Display Sel. Description You can change the settings of the 3D function. For Switching the video images to "2D" or "3D." Auto: Displays 3D video images when HDMI
  • Sony VPL-GTZ1/B | Product Manual (VPL-GTZ1 Operation manual) - Page 35
    Setting items 3D Brightness 3D Depth Adjust Simulated 3D Effect Dynamic Range Test Pattern Description For adjusting the brightness of the picture when watching 3D video images. You can select the brightness from "High" or "Standard." For adjusting the depth of the 3D video images on the
  • Sony VPL-GTZ1/B | Product Manual (VPL-GTZ1 Operation manual) - Page 36
    Installation Menu The Installation menu is used for changing the installation settings. Setting items V Keystone Image Flip Lens Control Illumination Description Corrects the vertical trapezoidal distortion of the picture. When the bottom of the trapezoid is longer than the top ( a lower value (-
  • Sony VPL-GTZ1/B | Product Manual (VPL-GTZ1 Operation manual) - Page 37
    Setting items Blanking Description This feature allows you to adjust the displayable region within the four directions of the projection surface. Select the edge to adjust by highlighting Left, Right, Top, or Bottom using the M/m buttons. Adjust the amount of blanking using the
  • Sony VPL-GTZ1/B | Product Manual (VPL-GTZ1 Operation manual) - Page 38
    the IP address setting method. Auto (DHCP): The IP address is assigned automatically from the DHCP server such as a router. Manual: Specifies the IP address manually. When "Manual" is selected for "IP Address Setup," select the item with the
  • Sony VPL-GTZ1/B | Product Manual (VPL-GTZ1 Operation manual) - Page 39
    Information Menu The Information menu displays the model name, serial number, input signal type, and software version. Model name Serial No. Signal type Software version Items Model Name Serial No. Signal type Software Version Description Displays the model name Displays the serial number.
  • Sony VPL-GTZ1/B | Product Manual (VPL-GTZ1 Operation manual) - Page 40
    ], Crestron RoomView, Control4). Notes • When connecting this projector with the network, consult with the network administrator. The the explanation below may be different depending on the model you are using. • Supported Web browsers are Internet Explorer 8/9/10/11. • The menu displays only English
  • Sony VPL-GTZ1/B | Product Manual (VPL-GTZ1 Operation manual) - Page 41
    was set. Note If you forget your password, consult with qualified Sony personnel. Confirming the Information Regarding the Unit You can confirm the enter "root" for user name and enter "Projector" for password. The name of the administrator is preset to "root." Information area Operating
  • Sony VPL-GTZ1/B | Product Manual (VPL-GTZ1 Operation manual) - Page 42
    Error Handling Troubleshooting If the unit appears to be operating erratically, try to diagnose and correct the problem using the following instructions. If the problem persists, consult with qualified Sony personnel. Power Symptom The power is not turned on. The power is suddenly turned off.
  • Sony VPL-GTZ1/B | Product Manual (VPL-GTZ1 Operation manual) - Page 43
    away from the projection surface. For details, see "Precautions for use" of "Using the 3D Glasses." Page 17 - 34 53 - 17 57 17 Error Handling Troubleshooting 43
  • Sony VPL-GTZ1/B | Product Manual (VPL-GTZ1 Operation manual) - Page 44
    is not too high. - Check the installation requirements of the unit. - Fan speed increases to maintain the product reliability of the projector's components in a room where the temperature is higher than normal. The fan noise becomes slightly louder in these rooms. The approximate normal
  • Sony VPL-GTZ1/B | Product Manual (VPL-GTZ1 Operation manual) - Page 45
    indicator lights up or flashes if there is any trouble with your projector. WARNING1 indicator WARNING2 indicator Flashing/Lighting indicators The source may be at the end of its service life. In this case, consult with qualified Sony personnel. The unit detects a drop impact. If there
  • Sony VPL-GTZ1/B | Product Manual (VPL-GTZ1 Operation manual) - Page 46
    will automatically enter Standby Mode in 1 minute. Note If no signal is input, the power turns off after 1 minute, and the projector goes into standby mode. Caution messages Symptom x Not applicable! Cause and Remedy Page No signal is input in the selected input. Check connections. 14 Press
  • Sony VPL-GTZ1/B | Product Manual (VPL-GTZ1 Operation manual) - Page 47
    updated, insert a USB memory device into a PC connected to the internet. Download the update files from the following Sony website: http://www.pro.sony.eu/pro/article/ projectors-home-cinema-article The website also explains how to install the update. About x.v.Color • "x.v.Color" is a promotion
  • Sony VPL-GTZ1/B | Product Manual (VPL-GTZ1 Operation manual) - Page 48
    About the Simulated 3D Feature • Use the simulated 3D function taking into account that the picture will provide a different look from the original images, because this function converts the video images. • Note that if the unit is used for profit or for public viewing, displaying 2D video images as
  • Sony VPL-GTZ1/B | Product Manual (VPL-GTZ1 Operation manual) - Page 49
    are approximate. • Not all optional accessories are available in all countries and area. Please check with your local Sony Authorized Dealer. • Information on accessories in this manual is current as of October 2014. Design and specifications of this unit and its optional accessories are subject to
  • Sony VPL-GTZ1/B | Product Manual (VPL-GTZ1 Operation manual) - Page 50
    Preset Signals The following table shows the signals and video formats which you can project using this unit. When a signal other than the preset signals shown below is input, the picture may not be displayed properly. Preset memory no. Preset signal (resolution) 5 480/60p 480/60p (Progressive
  • Sony VPL-GTZ1/B | Product Manual (VPL-GTZ1 Operation manual) - Page 51
    Preset memory no. Preset signal (resolution) 77 4096 × 2160/50p* 4096 × 2160/50p (4096 × 2160) 78 4096 × 2160/30p 4096 × 2160/30p (4096 × 2160) 79 4096 × 2160/25p 4096 × 2160/25p (4096 × 2160) 93 3840 × 2160/24p 3840 × 2160/24p (3840 × 2160) 94 3840 × 2160/25p 3840 × 2160/25p (
  • Sony VPL-GTZ1/B | Product Manual (VPL-GTZ1 Operation manual) - Page 52
    Input Signals and Adjustment/Setting Items The items in the menus available to adjust differ depending on the input signal. The following tables indicate them. The items that cannot be adjusted/set are not displayed in the menu. Picture menu Item Super Resolution Laser Light Setting Contrast
  • Sony VPL-GTZ1/B | Product Manual (VPL-GTZ1 Operation manual) - Page 53
    Screen menu Item Aspect*1 Input signal Component signal Video GBR signal z (excluding preset z (excluding preset memory numbers 76 memory numbers 78, to 79 and 96) 79 and 96) Computer signal - z: Can be adjusted/set -: Cannot be adjusted/set *1: For further details, refer to the tables in "
  • Sony VPL-GTZ1/B | Product Manual (VPL-GTZ1 Operation manual) - Page 54
    Item Film Mode x.v.Color Aspect*3 720/60p, 720/50p - z z 3D signals 1080/60i, 1080/50i 1080/24p z - z z z z 1080/60p, 1080/50p - z z z: Can be adjusted/set -: Cannot be adjusted/set *1: "Dynamic Control" cannot be selected. *2: The item is not available for Frame Packing/Over-Under/Side-
  • Sony VPL-GTZ1/B | Product Manual (VPL-GTZ1 Operation manual) - Page 55
    Aspect Mode Selectable items vary depending on the type of input signal or 3D format. For details, see the tables below. Items that cannot be selected are not displayed in the menu. 2D Acceptable signals Preset memory number (page 50) 1.85:1 Zoom 2.35:1 Zoom Normal Stretch 4096 × 2160 76 to 79,
  • Sony VPL-GTZ1/B | Product Manual (VPL-GTZ1 Operation manual) - Page 56
    Picture menu Item Calib. Preset Reset Super Resolution Laser Light Setting Contrast Enhancer Motionflow Contrast Brightness Color Hue Color Temp. D93-D55 Custom 1-5 Gain R Gain G Gain B Bias R Bias G Bias B Sharpness NR MPEG NR Smooth Gradation Film Mode Gamma Correction Color Correction Clear White
  • Sony VPL-GTZ1/B | Product Manual (VPL-GTZ1 Operation manual) - Page 57
    Installation Distance and Projection Image Size W1 D1 W2 D2 H2 L2 H1 L1 L1: Distance from a projection surface to the rear of the unit L2: Distance from a projection surface to the front of the unit D1: Maximum projection image size D2: Minimum projection image size H1: Distance from a floor to the
  • Sony VPL-GTZ1/B | Product Manual (VPL-GTZ1 Operation manual) - Page 58
    When projecting in 1.90:1 (Native Full Display 17:9) format 1.90 1 Projection image size Maximum Minimum Diagonal 1 Width × (D1) Height Bottom height (H1) Diagonal 2 (D2) Width × Height Maximum 147-inch 3.30 m × projection (3.73 m) 1.74 m (130 inches × 69 inches) Intermediate 127-inch 2.84
  • Sony VPL-GTZ1/B | Product Manual (VPL-GTZ1 Operation manual) - Page 59
    When projecting in 1.78:1 (16:9) format 1.78 Video display area 1 Projection area Projection image size Maximum Minimum Diagonal 1 Width × (D1) Height Bottom height (H1) Diagonal 2 (D2) Width × Height Maximum 140-inch 3.10 m × projection (3.56 m) 1.74 m (122 inches × 69 inches) Intermediate
  • Sony VPL-GTZ1/B | Product Manual (VPL-GTZ1 Operation manual) - Page 60
    Dimensions Front Top 1100 (43 3/8) 265 (10 1/2) Unit: mm (inches) Unit: mm (inches) 535 (21 1/8) When the handles are attached. 1250 (49 1/4) 535 (21 1/8) 60 Dimensions
  • Sony VPL-GTZ1/B | Product Manual (VPL-GTZ1 Operation manual) - Page 61
    Bottom 490 (19 3/8) Front 490 (19 3/8) Unit: mm (inches) 430 (17) 100 (4) 85 (3 3/8) 459 (18 1/8) 100 (4) 430 (17) Location of the label Warning label Explanation label Laser emission port Others Dimensions 61
  • Sony VPL-GTZ1/B | Product Manual (VPL-GTZ1 Operation manual) - Page 62
    Laser Diode Properties 3.5 W, 28 Laser diodes (440 to 455 nm) 2.4 W, 7 Laser diodes (455 to 470 nm) Beam divergence angle from the projection window of this unit Wide: α = 144° Tele: α = 123° Laser emission port 62 Dimensions
  • Sony VPL-GTZ1/B | Product Manual (VPL-GTZ1 Operation manual) - Page 63
    the following link: http://www.sony.net/Products/Linux GNU GENERAL we are referring to freedom, not price. Our General Public Licenses are designed to software (and charge for this service if you wish), that you is not the original, so that any problems introduced by others will not reflect on
  • Sony VPL-GTZ1/B | Product Manual (VPL-GTZ1 Operation manual) - Page 64
    translation is included without limitation in the term "modification".) Each licensee is addressed as "you". Activities other than copying, distribution and modification are not covered by this License; they are outside its scope. The act of running the Program is not restricted, and the output from
  • Sony VPL-GTZ1/B | Product Manual (VPL-GTZ1 Operation manual) - Page 65
    , but may differ in detail to address new problems or concerns. Each version is given a distinguishing version exceptions for this. Our decision will be guided by the two goals of preserving the free DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION. IN NO EVENT UNLESS
  • Sony VPL-GTZ1/B | Product Manual (VPL-GTZ1 Operation manual) - Page 66
    we speak of free software, we are referring to freedom of use, not price. Our General Public Licenses are designed to make sure that you have the freedom to distribute copies of free software (and charge for this service if you wish); that you receive source code or can get it if
  • Sony VPL-GTZ1/B | Product Manual (VPL-GTZ1 Operation manual) - Page 67
    on, the recipients should know that what they have is not the original version, so that the original author's reputation will not be affected by problems that might be introduced by others. Finally, software patents pose a constant threat to the existence of any free program. We wish to make sure
  • Sony VPL-GTZ1/B | Product Manual (VPL-GTZ1 Operation manual) - Page 68
    definition files, plus the scripts used to control compilation and installation of the library. Activities other than copying, distribution and modification are not covered by this License; they are outside its scope. The act of running a program using the Library is not restricted, and output from
  • Sony VPL-GTZ1/B | Product Manual (VPL-GTZ1 Operation manual) - Page 69
    When a "work that uses the Library" uses material from a header file that is part of the Library, the object code for the work may be a derivative work of the Library even though the source code is not. Whether this is true is especially significant if the work can be linked without the Library, or
  • Sony VPL-GTZ1/B | Product Manual (VPL-GTZ1 Operation manual) - Page 70
    , but may differ in detail to address new problems or concerns. Each version is given a distinguishing version exceptions for this. Our decision will be guided by the two goals of preserving the free DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION. 16. IN NO EVENT
  • Sony VPL-GTZ1/B | Product Manual (VPL-GTZ1 Operation manual) - Page 71
    LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
  • Sony VPL-GTZ1/B | Product Manual (VPL-GTZ1 Operation manual) - Page 72
    LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
  • Sony VPL-GTZ1/B | Product Manual (VPL-GTZ1 Operation manual) - Page 73
    (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER holder shall not be used in advertising or otherwise to promote the sale, use or other dealings in this Software without prior written authorization of
  • Sony VPL-GTZ1/B | Product Manual (VPL-GTZ1 Operation manual) - Page 74
    (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER that both the above copyright notice(s) and this permission notice appear in supporting documentation. THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF
  • Sony VPL-GTZ1/B | Product Manual (VPL-GTZ1 Operation manual) - Page 75
    holder shall not be used in advertising or otherwise to promote the sale, use or other dealings in this Software without prior written authorization DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
  • Sony VPL-GTZ1/B | Product Manual (VPL-GTZ1 Operation manual) - Page 76
    , provided that the above copyright notice appears in all copies and that both the copyright notice and this permission notice appear in supporting documentation, and that the name University of Delaware not be used in advertising or publicity pertaining to distribution of the software without
  • Sony VPL-GTZ1/B | Product Manual (VPL-GTZ1 Operation manual) - Page 77
    (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) SUCH DAMAGE pcre PCRE LICENCE -----------PCRE is a library of functions to support regular expressions whose syntax and semantics are as close as possible to those
  • Sony VPL-GTZ1/B | Product Manual (VPL-GTZ1 Operation manual) - Page 78
    LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
  • Sony VPL-GTZ1/B | Product Manual (VPL-GTZ1 Operation manual) - Page 79
    Index Numerics 3D glasses 3D glasses communication range ........17 Using the 3D glasses 17 3D Settings 2D-3D Display Sel. (Select 34 3D Brightness 35 3D Depth Adjust 35 3D Format 34 Simulated 3D Effect 35 3D video 17 A Aspect 1.85:1 Zoom 19, 31 2.35:1 Zoom 19, 31 Normal 20, 31 Stretch 20
  • Sony VPL-GTZ1/B | Product Manual (VPL-GTZ1 Operation manual) - Page 80
    Resolution 25 80 Index T Test Pattern 35 Troubleshooting 42 Turning off 16 Turning on 9 U "PlayStation" is a registered trademark of Sony Computer Entertainment Inc. • This unit projector supports DeepColor, x.v.Color, LipSync, computer input signal, 3D signal and 4K signal of HDMI
  • Sony VPL-GTZ1/B | Product Manual (VPL-GTZ1 Operation manual) - Page 81
    Sony Corporation
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81

Operating Instructions
Before operating the unit, please read this manual and supplied Quick
Reference Manual thoroughly and retain it for future reference.
VPL-GTZ1
4-547-802-
11
(1)
Data Projector
© 2014 Sony Corporation