Sony XBR-55HX929 Additional Information for Using Sony® Wall-Hanging B
Sony XBR-55HX929 Manual
View all Sony XBR-55HX929 manuals
Add to My Manuals
Save this manual to your list of manuals |
Sony XBR-55HX929 manual content summary:
- Sony XBR-55HX929 | Additional Information for Using Sony® Wall-Hanging B - Page 1
DXG-100-11(1) Additional Information for Using Sony Wall-Hanging Bracket (SU-WH500) Compatible TV models for this Wall-Hanging Bracket information: XBR-55HX929/55HX927/55HX925/55HX920/46HX929 KDL-55HX827/55HX825/55HX820/46HX820 KDL-60NX720/55NX720/46NX727/46NX725/46NX720/40NX727/40NX725/40NX720 For - Sony XBR-55HX929 | Additional Information for Using Sony® Wall-Hanging B - Page 2
to properly carry out the installation. Open the Wall-Hanging Bracket package and check for all the required parts along with the Instructions. 1 Decide where you want to install your TV. Make a mark on the Paper Template supplied with the Wall-Hanging Bracket that indicates the screen center of - Sony XBR-55HX929 | Additional Information for Using Sony® Wall-Hanging B - Page 3
capable of supporting a weight of at least four times that of the TV. Refer to your TV's operating instructions for its weight. 2 Install the Wire Bracket on the wall. Refer to the Instructions for SU-WH500. 3 Disconnect all the cables from the TV. 4 Detach the Table-Top Stand from the TV. Remove - Sony XBR-55HX929 | Additional Information for Using Sony® Wall-Hanging B - Page 4
5 Attach the other items supplied with the Wall-Hanging Bracket and cables. * In the actual model names, the "" indicates numbers and/or characters specific to each model. Remove the screws from the rear of the TV. (They are fastened in the screw holes for wall mounting.) Be sure to store the - Sony XBR-55HX929 | Additional Information for Using Sony® Wall-Hanging B - Page 5
TV's instructions. ✍ • When you put the TV back on the Table-Top Stand, reverse the above steps. • Available TV models vary depending on the country/region. • The availability of this Wall-Hanging Bracket (SU-WH500) varies depending on the country/region. Additional Information for Using Sony Wall
− ± −
Additional Information for Using Sony Wall-Hanging Bracket (SU-WH500)
Additional Information for
Using Sony Wall-Hanging Bracket (SU-WH500)
Compatible TV models for this Wall-Hanging Bracket information:
XBR-55HX929/55HX927/55HX925/55HX920/46HX929
KDL-55HX827/55HX825/55HX820/46HX820
KDL-60NX720/55NX720/46NX727/46NX725/46NX720/40NX727/40NX725/40NX720
For product protection and safety reasons, Sony strongly recommends that you use the
Wall-Hanging Bracket model designed for your TV and that the wall-hanging of your TV
is performed by Sony dealers or licensed contractors.
To Customers
Please provide your licensed contractor with this installation supplement as well as the instructions
(supplied with the SU-WH500 Wall-Hanging Bracket). Read these documents carefully for safety and
proper installation.
To Sony Dealers and Contractors
Provide full attention to safety during the installation, periodic maintenance and examination of this
product.
Sufficient expertise is required in installing this product, especially to determine the strength of
the wall for withstanding the TV’s weight. Be sure to entrust the attachment of this product to
the wall to Sony dealers or licensed contractors and pay adequate attention to safety during the
installation. Sony is not liable for any damage or injury caused by mishandling or improper
installation.
For proper installation, follow your wall-hanging bracket instructions and the directions below.
A-DXG-±00-
11
(±)