Sony XM-7527 Product Guide / Specifications
Sony XM-7527 - Stereo Power Amplifier Manual
 |
View all Sony XM-7527 manuals
Add to My Manuals
Save this manual to your list of manuals |
Sony XM-7527 manual content summary:
- Sony XM-7527 | Product Guide / Specifications - Page 1
2000 MOBILE ES PRODUCT GUIDE Amplifiers XM-7527 2/1 Channel Amplifier • 75 W x 2 (4 ohm) at 0.04% THD (14.4 V) • 150 W x 2 at 2 ohm (14.4 V) • 300 W x 1 (4 ohm) (14.4V) • Non-Negative Feedback Design • High Current MOSFET Output Stage • 0.5 ohm Drive Capability • MOSFET Switching Power Supply • - Sony XM-7527 | Product Guide / Specifications - Page 2
2000 MOBILE ES PRODUCT GUIDE XM-7527 2/1 Channel Amplifier GND +12V 25A 25A L R 27
-
1 -
2
 |
 |
26
2000 MOBILE ES PRODUCT GUIDE
Design and specifications subject to change without notice.
Specifications
Circuit System
Inputs
Outputs
Speaker Impedance
(*
Hi-current mode)
Rated Outputs
(at 14.4 VDC, NFB on)
(Hi-Current /Hi-Voltage)
(Hi-Current)
Maximum Output
(Hi-Current /Hi-Voltage)
Frequency Response
Harmonic Distortion
Input Level Adjustment Range
High-Pass Filter
Low-Pass Filter
Low Boost & Cut
Power Requirements
Power Supply Voltage
Current Drain
Dimensions (w/h/d)
Weight
Supplied Accessories
Pure Direct Drive SEPP
Pulse Power Supply
RCA Pin Jacks
Speaker Terminals
0.5*-8
Ω
(stereo)
1*-8
Ω
(when used as bridging amplifier)
35.7/75 W x 2 (20-20,000 Hz, 0.04% THD, at 4
Ω
)
75/150 W x 2 (20-20,000 Hz, 0.10% THD, at 2
Ω
)
150/300 W x 1 (20-20,000 Hz, 0.10% THD, at 4
Ω
)
150 W x 2 (20-20,000 Hz, 0.3% THD, at 1
Ω
)
180 W x 2 (20-20,000 Hz, 0.3% THD, at 0.5
Ω
)
300 W x 1 (20-20,000 Hz, 0.10% THD, at 2
Ω
)
360 W x 1 (20-20,000 Hz, 0.3% THD, at 1
Ω
)
90/180 W x 2 (at 4 ohms)
180/300 W x 2 (at 2 ohms)
360/600 W x 1 (at 4 ohms)
5 Hz-100 Hz (+0/-3 dB)
0.005% or less (at 1 kHz, 4 ohms)
0.2-4.0 V
50-200 Hz, -12 dB/oct
50-200 Hz, -12 dB/oct
0-10dB (7-40Hz)
12 V DC Car Battery (negative ground)
10.5-16 V
At Rated Output: 23 A (4 ohms, Hi-Voltage), 58 A (4 ohms, Hi-Current); Remote Input: 1.6 mA
Approx. 321 x 84 x 287mm (315 w/cover)/(12
5
/
8
x 3
5
/
16
x 11
1
/
4
in.) (12
3
/
8
in. w/cover)
Approx. 5 kg (11 lb.)
Mounting Screws (4), Terminal Protect Cover (1), 3mm Hex Wrench (1)
XM-7527
2/1 Channel Amplifier
•
0.5 ohm Drive Capability
•
MOSFET Switching Power Supply
•
Dual Mode Mono/Stereo
•
50-200 Hz LP Filter, 50-200 Hz HP Filter
•
7-40 Hz Low Frequency Boost/Cut
•
75 W x 2 (4 ohm) at 0.04% THD (14.4 V)
•
150 W x 2 at 2 ohm (14.4 V)
•
300 W x 1 (4 ohm) (14.4V)
•
Non-Negative Feedback Design
•
High Current MOSFET Output Stage
Amplifiers