Stihl FC 56 C-E Product Instruction Manual

Stihl FC 56 C-E Manual

Stihl FC 56 C-E manual content summary:

  • Stihl FC 56 C-E | Product Instruction Manual - Page 1
    STIHL FC 56 C { Instruction Manual Manual de instrucciones Warning! Read and follow all safety precautions in Instruction Manual - improper use can cause serious or fatal injury. Advertencia! Lea y siga todas las precauciones de seguridad dadas en el manual de instrucciones - el uso incorrecto
  • Stihl FC 56 C-E | Product Instruction Manual - Page 2
    Instruction Manual 1 - 37 Manual de instrucciones 39 - 81
  • Stihl FC 56 C-E | Product Instruction Manual - Page 3
    33 { FC 56 C English Allow only persons who fully understand this manual to operate your edger. To receive maximum performance and 35 satisfaction from your STIHL edger, it is 37 important that you read, understand and follow the safety precautions and the operating and maintenance instructions in
  • Stihl FC 56 C-E | Product Instruction Manual - Page 4
    English Guide to Using this Manual Symbols in Text Many operating and safety instructions are supported by illustrations. The individual steps or procedures described in the manual may be marked in different ways: N A bullet marks a step or procedure. A description of a step or procedure that
  • Stihl FC 56 C-E | Product Instruction Manual - Page 5
    and warnings apply to the use of all STIHL edgers. Different models may have different parts and controls. See the appropriate section of your instruction manual for a description of the controls and function of the parts of your model. Safe use of an edger involves 1. the operator 2. the power tool
  • Stihl FC 56 C-E | Product Instruction Manual - Page 6
    following: - Most STIHL power tools are available The ignition system of the STIHL unit produces an electromagnetic field of injury to your face STIHL recommends that you also wear the machine and metal blades. Heavy-duty, nonslip branches, brush or the moving parts of the unit. Secure hair
  • Stihl FC 56 C-E | Product Instruction Manual - Page 7
    STIHL servicing dealer. control and blade contact, edger down. When transporting it in a vehicle, properly secure it to prevent turnover, fuel spillage and damage to the unit. Fuel Your STIHL power tool uses an oilgasoline mixture for fuel (see the chapter on "Fuel" of your instruction manual
  • Stihl FC 56 C-E | Product Instruction Manual - Page 8
    tightened fuel cap, correctly position and tighten the fuel cap in the fuel tank opening. To do this with this STIHL cap, raise the grip on the top of the cap until it is upright at a 90° angle. Insert counterclockwise as far as it will go (approx. 1/4 turn) - this will twist 001BA226 KN 6 FC 56 C
  • Stihl FC 56 C-E | Product Instruction Manual - Page 9
    it to your authorized STIHL dealer for repair. parts. Failure to use the proper parts may cause the blade instructions, see the appropriate section of your manual. Place the power tool on firm ground or other solid surface in an open area. Maintain good balance and secure footing. 002BA118 KN FC 56
  • Stihl FC 56 C-E | Product Instruction Manual - Page 10
    blade not let the grip snap back, but guide the starter rope to rewind it properly. instruction manual. If you cannot set the correct idle speed, have your STIHL on a ladder or on any other insecure support. Never hold the cutting attachment above waist height part of your body. 002BA054 KN 8 FC 56 C
  • Stihl FC 56 C-E | Product Instruction Manual - Page 11
    ) and carbon monoxide, that are known to cause respiratory problems, cancer, birth defects, or other reproductive harm. Some such as an active pesticide or herbicide), read and follow the instructions and warnings that accompanied the substance at issue. Warning! Inhalation engine speed. FC 56 C 9
  • Stihl FC 56 C-E | Product Instruction Manual - Page 12
    blade for cracks, wear and damage. Warning! A loose blade may vibrate, crack, break or come off the edger cleaning. Grass, weeds, etc. should be cleaned off the blade at regular intervals. serviced and repaired by your STIHL servicing dealer only. Warning! The muffler and other parts of FC 56 C
  • Stihl FC 56 C-E | Product Instruction Manual - Page 13
    repair work not described in your instruction manual. Have such work performed by your STIHL servicing dealer only. English Wear gloves when handling or performing maintenance on blades. Warning! Use the specified spark -covered, brush-covered or grass-covered land unless the engine's FC 56 C 11
  • Stihl FC 56 C-E | Product Instruction Manual - Page 14
    empty the fuel tank. See chapter "Storing the Machine" in the instruction manual. Using the Unit Your power edger is designed to produce sharp contoured borders around lawns and flower beds. It will cut almost all types of grass, weeds and soft green plants. Preparations If the soil is very dry
  • Stihl FC 56 C-E | Product Instruction Manual - Page 15
    Lawn and continue cutting at full throttle. N Hold and guide your edger so that the blade is vertical. N Cut steadily so that the engine blade into the ground. N Always walk forwards when cutting, do not pull the unit towards you. N Edge at a steady pace to avoid having to make several passes. FC 56
  • Stihl FC 56 C-E | Product Instruction Manual - Page 16
    546BA011 KN English 1 N Use the gunning sight (1) to line up the blade on the edge. 241BA005 KN Mounting the Loop Handle Your new power tool comes with the loop handle mounted on the handle cannot be rotated on the drive tube. 545BA004 KN N Turn the handle to the vertical position. 14 FC 56 C
  • Stihl FC 56 C-E | Product Instruction Manual - Page 17
    cause running problems and major damage in engines with a manually adjustable carburetor and should not be used in such engines. The ethanol content in gasoline affects engine running speed - it may be necessary to readjust the carburetor if you use fuels with various ethanol contents. FC 56 C 15
  • Stihl FC 56 C-E | Product Instruction Manual - Page 18
    another fuel with a much higher or lower ethanol content. This problem can be avoided by always using fuel with the same ethanol content. Use only STIHL two-stroke engine oil or equivalent high-quality two-stroke engine oils different filler caps is installed as standard at the factory. 16 FC 56 C
  • Stihl FC 56 C-E | Product Instruction Manual - Page 19
    turn). 001BA224 KN N Remove fuel filler cap. Refueling Take care not to spill fuel while fueling and do not overfill the tank. STIHL recommends use of the STIHL filling system (special accessory). Closing the toolless filler cap N Fold down the grip. 001BA220 KN With grip in an upright position
  • Stihl FC 56 C-E | Product Instruction Manual - Page 20
    cap can be moved, it is not properly installed. Misalignment of the cap parts N If the cap does not drop fully into the opening when the positioning fuel while fueling and do not overfill the tank. STIHL recommends use of the STIHL filling system (special accessory). Closing the threaded filler cap
  • Stihl FC 56 C-E | Product Instruction Manual - Page 21
    the same time. Warm engine (warm start) 547BA016 KN N Place the unit on the ground: Check that the cutting blade is not touching the ground of any other obstacles. N Make sure you have a firm footing. N Hold the unit N Press in the choke lever (5) and turn it to < at the same time. FC 56 C 19
  • Stihl FC 56 C-E | Product Instruction Manual - Page 22
    might otherwise break. N Do not let the starter grip snap back. Guide it slowly back into the housing so that the starter rope can rewind throttle several times. Make sure the carburetor is correctly adjusted. The cutting blade must not rotate when the engine is idling. Your machine is now FC 56 C
  • Stihl FC 56 C-E | Product Instruction Manual - Page 23
    Instructions Cleaning the Air Filter English 4 547BA022 KN 547BA023 KN During break-in period A factory-new machine should not be run at high revs (full throttle off load) for the first three tank fillings. This avoids unnecessary high loads during the break-in period. As all moving parts parts.
  • Stihl FC 56 C-E | Product Instruction Manual - Page 24
    engine if necessary. N Adjust idle speed with the idle speed screw (LA) so that the cutting blade does not turn. Fine Tuning for Operation in Mountains or at Sea Level A slight correction of the (LA) slowly clockwise until the engine runs smoothly - the cutting blade must not turn. 22 FC 56 C
  • Stihl FC 56 C-E | Product Instruction Manual - Page 25
    blade continues to rotate when the engine is idling, have your machine checked and repaired by your servicing result in trouble in problems which have caused fouling of spark plug: - Too much oil in fuel mix. - Dirty air filter. - Unfavorable running conditions, e.g. operating at part load. FC 56
  • Stihl FC 56 C-E | Product Instruction Manual - Page 26
    muffler checked for contamination (carbonization) by your servicing dealer. STIHL recommends that you have servicing and repair work carried out exclusively by an authorized STIHL servicing dealer. 000BA071 KN Warning! To reduce If the cap has become detached from the spark plug boot: 24 FC 56 C
  • Stihl FC 56 C-E | Product Instruction Manual - Page 27
    screw the tube (2) of STIHL gear lubricant for brushcutters - guide it back into the housing slowly - see chapter on "Starting / Stopping the Engine." Have a damaged starter rope replaced by your dealer before it breaks completely. STIHL recommends that you have servicing the cutting blade. N Store
  • Stihl FC 56 C-E | Product Instruction Manual - Page 28
    STIHL servicing dealer. Depth wheel 1 2 N The end of the thread on the screw (1) is caulked to ensure that the wingnut (2) does not work loose and be lost. A very high torque has to be applied to remove the wingnut from the screw. If the parts Insert the screw and tighten it down firmly. 26 FC 56 C
  • Stihl FC 56 C-E | Product Instruction Manual - Page 29
    an authorized STIHL servicing dealer. To avoid out-of-balance: N Have your dealer check the blade for out-of-balance on a STIHL balancer (special accessory) - STIHL recommends an authorized STIHL servicing dealer. If blade is out-of-balance, fit a new one - see "Replacing the Edger Blade". FC 56
  • Stihl FC 56 C-E | Product Instruction Manual - Page 30
    the blade must servicing dealer1) All accessible screws and nuts (not adjusting screws) Retighten before starting work after finishing work or daily after each refueling stop weekly monthly every 12 months if problem if damaged if required X X X X X X X X X X X X X X X X 28 FC 56
  • Stihl FC 56 C-E | Product Instruction Manual - Page 31
    labels Replace 1) STIHL recommends that this work be done by a STIHL servicing dealer. 2) Not in all versions, country-specific before starting work after finishing work or daily after each refueling stop weekly monthly every 12 months if problem if damaged if required English X X FC 56 C 29
  • Stihl FC 56 C-E | Product Instruction Manual - Page 32
    Adjusting Screws 8 Choke Lever 9 Air Filter Cover 10 Cap with Spark Plug Boot 11 Machine Support 12 Fuel Tank 13 Fuel Filler Cap 14 Fuel Pump 15 Starter Grip 16 Muffler with Spark Arresting Screen 17 Cutting Blade 18 Deflector 19 Wingnut 20 Wheel 21 Skirt # Serial Number 545BA003 KN 30 FC 56 C
  • Stihl FC 56 C-E | Product Instruction Manual - Page 33
    spark plug to the ignition wire. 11 Machine Support For resting machine on the ground. 12 Fuel of fire. 17 Cutting Blade Metal cutting blade for cutting weeds and soft green plants. Wheel The wheel mounted on the deflector guides the cutting blade of the edger over the ground at a preset FC 56 C 31
  • Stihl FC 56 C-E | Product Instruction Manual - Page 34
    only if the repair has been performed by an authorized STIHL servicing dealer using original STIHL replacement parts. Original STIHL parts can be identified by the STIHL part number, the { logo and, in some cases, by the STIHL parts symbol K. The symbol may appear alone on small parts. 32 FC 56 C
  • Stihl FC 56 C-E | Product Instruction Manual - Page 35
    card to STIHL. If any emission-related part on your engine is defective, the part will be replaced by STIHL Incorporated at no cost to the owner. Any warranted part which is not scheduled for replacement as required maintenance, or which is scheduled only for regular inspection to FC 56 C 33
  • Stihl FC 56 C-E | Product Instruction Manual - Page 36
    affect performance and/or durability, and alterations or modifications not recommended or approved in writing by STIHL Incorporated, and N replacement of parts and other services and adjustments necessary for required maintenance at and after the first scheduled replacement point. 34 FC 56 C
  • Stihl FC 56 C-E | Product Instruction Manual - Page 37
    parts that are not exempted by CARB may not be used. The use of any non exempted add-on or modified parts will be grounds for disallowing a warranty claim. STIHL Incorporated will not be liable to warrant failures of warranted parts caused by the use of a non exempted add-on or modified part. FC 56
  • Stihl FC 56 C-E | Product Instruction Manual - Page 38
    for replacement as required maintenance in the written instructions required in the Emission Warranty Parts List (see below) must be warranted for the warranty period defined in Subsection COVERAGE BY STIHL INCORPORATED, see above. If any such part fails during the period of warranty coverage, it
  • Stihl FC 56 C-E | Product Instruction Manual - Page 39
    #3,400,476) 4-MIX® AUTOCUT® EASYSTART® FARM BOSS® iCademy® OILOMATIC® STIHL Cutquik® STIHL DUROMATIC® STIHL Quickstop® STIHL ROLLOMATIC® STIHL WOOD BOSS® TIMBERSPORTS® WOOD BOSS® YARD BOSS® FC 56 C Some of STIHL's Common Law Trademarks BioPlus™ Easy2Start™ EasySpool™ ElastoStart™ Ematic™ FixCut™ HT
  • Stihl FC 56 C-E | Product Instruction Manual - Page 40
    English 38 FC 56 C
  • Stihl FC 56 C-E | Product Instruction Manual - Page 41
    con su representante de STIHL o el distribuidor de STIHL para su zona si no se entiende alguna de las instrucciones dadas en el presente manual. Advertencia! Dado que Impreso en papel libre de cloro. © ANDREAS STIHL AG & Co. KG, 2011 0458-545-8621-B. M1.G11.PM. 0000001053_006_EA { FC 56 C 39
  • Stihl FC 56 C-E | Product Instruction Manual - Page 42
    el manual pueden estar este manual pueden filosofía de STIHL es mejorar continuamente manual. Si las características de funcionamiento o la apariencia de su máquina difieren de las descritas en este manual, comuníquese con el concesionario STIHL manual Presione para accionar la bomba manual
  • Stihl FC 56 C-E | Product Instruction Manual - Page 43
    diferentes. Vea la sección correspondiente de su manual de instrucciones para tener una descripción de los controles y la función de los componentes de su modelo. El uso seguro de una bordeadora atañe a 1. el operador 2. la herramienta motorizada 3. el uso de la herramienta motorizada. FC 56 C 41
  • Stihl FC 56 C-E | Product Instruction Manual - Page 44
    y del síndrome del túnel carpiano, sírvase notar lo siguiente: - La mayor parte de las herramientas motorizadas de STIHL se ofrecen con un sistema antivibración ("AV") cuyo propósito es reducir la transmisión o lanzados por el accesorio también pueden rebotar y golpear al operador. 42 FC 56 C
  • Stihl FC 56 C-E | Product Instruction Manual - Page 45
    de seguridad bien ajustados con una protección adecuada en las partes superior y laterales que satisfagan la norma ANSI Z 87.1 ada. En caso de dudas, pida que el concesionario de servicio de STIHL la revise. USO DE LA HERRAMIENTA MOTORIZADA Transporte de la herramienta motorizada marcha. FC 56 C 43
  • Stihl FC 56 C-E | Product Instruction Manual - Page 46
    daño a la máquina. Combustible La herramienta motorizada STIHL utiliza una mezcla de aceite-gasolina como combustible (vea el capítulo "Combustible" en el manual de instrucciones). 389BA019 KN ¡Advertencia! La gasolina es . El tipo de tapa de llenado difiere con los distintos modelos. 44 FC 56 C
  • Stihl FC 56 C-E | Product Instruction Manual - Page 47
    correcta y apriétela en la boca de llenado del tanque. Para hacer esto con esta tapa STIHL, levante la empuñadura en la parte superior de la tapa hasta dejarla vertical a un ángulo de 90°. Inserte la tapa en , la misma podría estar averiada o rota; ponga la máquina fuera de servicio de FC 56 C 45
  • Stihl FC 56 C-E | Product Instruction Manual - Page 48
    y llévela a un concesionario STIHL autorizado para repararla. Tapa roscada ¡ también el capítulo "Combustible" del Manual de instrucciones para obtener información adicional. Antes estar correctamente equilibrada de la forma especificada en el manual de instrucciones para un control correcto y menos
  • Stihl FC 56 C-E | Product Instruction Manual - Page 49
    vacío, vea la sección correspondiente del manual de instrucciones. español / EE.UU Si no puede regular correctamente el ralentí, pida a su concesionario STIHL que revise la herramienta motorizada y haga sujetar el mango trasero. Esto también corresponde a personas zurdas. 002BA054 KN FC 56 C 47
  • Stihl FC 56 C-E | Product Instruction Manual - Page 50
    las manos y los pies alejados del accesorio de corte. No toque nunca con las manos ni con cualquier parte del cuerpo un accesorio de corte en movimiento. ¡Advertencia! No trate de alcanzar más lejos de lo debido acelerador para arranque, pues no tendrá control de la velocidad del motor. 48 FC 56 C
  • Stihl FC 56 C-E | Product Instruction Manual - Page 51
    50ft) Para reducir el riesgo de ocasionar lesiones a los ojos u otras partes del cuerpo (vea el capítulo "Vestimenta adecuada"), asegúrese que las sustituida. Si la cuchilla continúa floja, consulte al concesionario STIHL. No use nunca una bordeadora con un accesorio de la cuchilla. FC 56 C 49
  • Stihl FC 56 C-E | Product Instruction Manual - Page 52
    diseñado para reducir el riesgo de incendio debido a la emisión de partículas calientes. Nunca haga funcionar la unidad sin tener instalado el chispero. , haga reparar el silenciador por un concesionario de servicio STIHL. Para ciertas aplicaciones, las leyes o los reglamentos estatales . 50 FC 56 C
  • Stihl FC 56 C-E | Product Instruction Manual - Page 53
    o reparación que no esté descrito en su manual de instrucciones. Este tipo de trabajo debe ser realizado únicamente por el concesionario de servicio de STIHL. Use guantes para manipular o reparar las cuchillas. con el cuerpo de bomberos de su localidad o con el servicio forestal para FC 56 C 51
  • Stihl FC 56 C-E | Product Instruction Manual - Page 54
    siempre vacíe el tanque de combustible. Consulte el capítulo "Almacenamiento de la máquina" en el manual de instrucciones. Uso La orilladora ha sido diseñada para formar orillas bien definidas alrededor de prados y de corte (A) o hacia abajo para reducir la profundidad de corte (A). 52 FC 56 C
  • Stihl FC 56 C-E | Product Instruction Manual - Page 55
    que el motor no pierda velocidad - no aplique fuerza. N Camine a un paso normal mientras se corta. N No empuje la cuchilla para meterla en el suelo. FC 56 C 53
  • Stihl FC 56 C-E | Product Instruction Manual - Page 56
    el tubo de mando. 241BA005 KN N Utilice la mirilla (1) para alinear la cuchilla con el borde. 545BA004 KN N Gire el mango a la posición vertical. 54 FC 56 C
  • Stihl FC 56 C-E | Product Instruction Manual - Page 57
    (roscas izquierdas). N Quite la arandela de empuje. 241BA006 KN N Apoye la bordeadora motorizada 7 sobre la parte trasera con el punto de montaje de la cuchilla (1) hacia arriba. 10 6 47 5 9 8 espa de montaje (6) en sentido contrahorario en el eje y apriétela firmemente. FC 56 C 55
  • Stihl FC 56 C-E | Product Instruction Manual - Page 58
    se evita si siempre se utiliza combustible con un mismo contenido de etanol.. Use solamente el aceite STIHL para motores de dos tiempos o un aceite de marca equivalente para motores de dos tiempos diseñado vigorosamente a mano para asegurar que se mezclen bien el aceite y la gasolina. 56 FC 56 C
  • Stihl FC 56 C-E | Product Instruction Manual - Page 59
    Gasolina Aceite (STIHL 50:1 ó aceite de alta calidad equivalente) Llenado de combustible gal EE.UU. tapas. Tapa de llenado sin necesidad de herramientas (con empuñadura plegable) 002BA418 KN 002BA456 KN FC 56 C 002BA419 KN N Antes de llenar la máquina con combustible, limpie a fondo la tapa
  • Stihl FC 56 C-E | Product Instruction Manual - Page 60
    combustible y no llene en exceso el tanque. STIHL recomienda el uso del sistema de llenado STIHL (accesorio especial). 001BA224 KN Con la empuñ hendidura (flecha) y la empuñadura debe quedar completamente a ras con la parte superior de la tapa. 001BA225 KN N Sujete la tapa y compruebe que est
  • Stihl FC 56 C-E | Product Instruction Manual - Page 61
    haber girado fuera de su posición correcta con relación a la parte superior. N Tal desalineación puede ser resultado de la manipulación, tanque. STIHL recomienda el uso del sistema de llenado STIHL (accesorio especial). Cierre de la tapa de llenado roscada 002BA447 KN 002BA448 KN FC 56 C
  • Stihl FC 56 C-E | Product Instruction Manual - Page 62
    suelo usando la mano izquierda en la caja y empuje hacia abajo. No se pare ni se arrodille sobre el tubo de mando. 547BA018 KN 60 FC 56 C
  • Stihl FC 56 C-E | Product Instruction Manual - Page 63
    se cala en la posición de arranque en frío g o durante la aceleración N Mueva la palanca del estrangulador a < y continúe haciendo girar el motor hasta que arranque. FC 56 C 61
  • Stihl FC 56 C-E | Product Instruction Manual - Page 64
    filtro de fieltro (5) del rebajo (4) en la caja del filtro. N Coloque un elemento de filtro de fieltro (5) nuevo. Como una medida provisoria, es posible limpiarlo FC 56 C 547BA023 KN 547BA022 KN
  • Stihl FC 56 C-E | Product Instruction Manual - Page 65
    el elemento, de ser necesario. N Pida que se revise el chispero (no se instala en todos los países) - vea "Inspecciones y mantenimiento por el concesionario" FC 56 C 63
  • Stihl FC 56 C-E | Product Instruction Manual - Page 66
    y se acelere adecuadamente. Generalmente es necesario cambiar el ajuste del tornillo de ralentí (LA) después de cada corrección hecha al tornillo de velocidad baja (L). 64 FC 56 C
  • Stihl FC 56 C-E | Product Instruction Manual - Page 67
    2 Advertencia! Para reducir el riesgo de incendio y de quemaduras, utilice solamente las bujías autorizadas por STIHL. Siempre empuje el casquillo (1) de la bujía firmemente en el borne (2) del tamaño adecuado. (Nota el cilindro. N Empuje el casquillo con la tapa firmemente en la bujía. FC 56 C 65
  • Stihl FC 56 C-E | Product Instruction Manual - Page 68
    (coquización) en el silenciador. STIHL recomienda que un concesionario STIHL autorizado efectúe los trabajos de interior del tapón de llenado, atornille el tubo (2) del lubricante para engranajes STIHL especial para cortadoras de matorrales - Vea "Accesorios especiales"- en el agujero de
  • Stihl FC 56 C-E | Product Instruction Manual - Page 69
    rueda Pida al concesionario que sustituya la rueda reguladora de profundidad desgastada. STIHL recomienda que un concesionario STIHL autorizado efectúe los trabajos de mantenimiento y reparación. Rueda reguladora de profundidad sustituya el tornillo con la tuerca mariposa. 241BA024 KN FC 56 C 67
  • Stihl FC 56 C-E | Product Instruction Manual - Page 70
    N Pida que un concesionario revise el desequilibrio de la cuchilla con un equilibrador STIHL (accesorio especial) - STIHL recomienda acudir a un concesionario STIHL para servicio. Si la cuchilla está desequilibrada, instale una nueva - vea "Sustitución de la cuchilla de la bordeadora". 68 FC 56 C
  • Stihl FC 56 C-E | Product Instruction Manual - Page 71
    el concesionario Chispero en el silenciador Chispero en silenciador (no en todos los mercados) N Si el motor pierde potencia, revise el chispero del silenciador. STIHL recomienda que un concesionario STIHL autorizado efectúe los trabajos de mantenimiento y reparación. español / EE.UU FC 56 C 69
  • Stihl FC 56 C-E | Product Instruction Manual - Page 72
    el trabajo o diariamente después de cada parada para cargar combustible semanalmente mensualmente cada 12 meses si hay problema si tiene daños si se requiere X X X X X X X X X X X X X X X X FC 56 C
  • Stihl FC 56 C-E | Product Instruction Manual - Page 73
    Reemplazar Revisar el apriete de la cuchilla X X Etiquetas de seguridad Reemplazar 1) STIHL recomienda que un concesionario de servicio STIHL efectúe este trabajo. 2) No se instala en todas las versiones, depende si hay problema si tiene daños si se requiere español / EE.UU X X FC 56 C 71
  • Stihl FC 56 C-E | Product Instruction Manual - Page 74
    15 Mango de arranque 16 Silenciador con chispero 17 Cuchilla 18 Deflector 19 Tuerca mariposa 20 Rueda 21 Faldilla # Número de serie 545BA003 KN 72 FC 56 C
  • Stihl FC 56 C-E | Product Instruction Manual - Page 75
    .UU 21 Faldilla La faldilla ha sido diseñada para reducir el riesgo de lesiones causadas por los objetos lanzados por la cuchilla de corte. FC 56 C 73
  • Stihl FC 56 C-E | Product Instruction Manual - Page 76
    salida (cuchilla) 8100 rpm Sistema de encendido Encendido por magneto electrónico Bujía(tipo resistencia): NGK CMR 6 H Distancia entre fl.oz) Peso Accesorios especiales Comuníquese con su concesionario STIHL para información acerca de accesorios especiales que pueden estar disponibles
  • Stihl FC 56 C-E | Product Instruction Manual - Page 77
    en su manual de instrucciones. STIHL Incorporated le recomienda guardar todos los recibos comprobantes de los trabajos de mantenimiento hechos a su motor pequeño para equipo de uso fuera de carretera, pero STIHL Incorporated no puede negar garantía basado en el solo hecho de faltar los FC 56 C 75
  • Stihl FC 56 C-E | Product Instruction Manual - Page 78
    si usted reclama garantía para un componente y se comprueba que la máquina no está defectuosa, STIHL Incorporated le cobrará el costo de la prueba del sistema de control de emisiones. El trabajo de - Estrangulador (sistema de refuerzo para arranque en frío) - Varillajes de control 76 FC 56 C
  • Stihl FC 56 C-E | Product Instruction Manual - Page 79
    Múltiple de admisión - Magneto o sistema de encendido electrónico (módulo de encendido) - Bujía - Convertidor catalí autorizado por STIHL y presente la tarjeta de garantía firmada. Requerimientos de mantenimiento Las instrucciones presentadas en este manual se basan arranque en frío), FC 56 C 77
  • Stihl FC 56 C-E | Product Instruction Manual - Page 80
    de admisión, magneto o sistema de encendido electrónico (módulo de encendido), bujía, convertidor mantenimiento requerido descrito en su manual de instrucciones. STIHL Incorporated le recomienda guardar todos STIHL INCORPORATED, vea más arriba. Si uno de estos componentes falla 78 FC 56 C
  • Stihl FC 56 C-E | Product Instruction Manual - Page 81
    de encendido electrónico STIHL Incorporated demuestra el maltrato, negligencia o mantenimiento incorrecto del producto de STIHL, y que tal maltrato, negligencia, o mantenimiento incorrecto era la causa directa de la necesidad de reparación o sustitución del componente. A pesar de lo anterior, FC 56
  • Stihl FC 56 C-E | Product Instruction Manual - Page 82
    ™ Micro™ Pro Mark™ Quad Power™ Quiet Line™ STIHL Compact™ STIHL HomeScaper Series™ STIHL Interchangeable Attachment Series™ STIHL M-Tronic™ STIHL Magnum™ STIHL MiniBoss™ STIHL MotoPlus 4™ STIHL Multi-Cut HomeScaper Series™ Stihl Outfitters™ STIHL PICCO™ STIHL PolyCut™ STIHL PowerSweep™ 80 FC 56 C
  • Stihl FC 56 C-E | Product Instruction Manual - Page 83
    ™ STIHL RAPID™ STIHL SuperCut™ STIHL Territory™ TapAction™ TrimCut™ Esta lista de marcas comerciales está sujeta a cambios. Queda terminantemente prohibido todo uso de estas marcas comerciales sin el consentimiento expreso por escrito de ANDREAS STIHL AG & Co. KG, Waiblingen. español / EE.UU FC 56
  • Stihl FC 56 C-E | Product Instruction Manual - Page 84
    español / EE.UU 82 FC 56 C
  • Stihl FC 56 C-E | Product Instruction Manual - Page 85
    español / EE.UU FC 56 C 83
  • Stihl FC 56 C-E | Product Instruction Manual - Page 86
    español / EE.UU 84 FC 56 C
  • Stihl FC 56 C-E | Product Instruction Manual - Page 87
  • Stihl FC 56 C-E | Product Instruction Manual - Page 88
    chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. 0458-545-8621-B englisch / spanisch USA U G U www.stihl.com ! ADVERTENCIA! El gas de escape del motor de esta máquina contiene productos químicos que en el estado de California son considerados
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88

{
STIHL FC 56 C
Warning!
Read and follow all safety
precautions in Instruction Manual –
improper use can cause serious or
fatal injury.
Advertencia!
Lea y siga todas las precauciones
de seguridad dadas en el manual
de instrucciones – el uso incorrecto
puede causar lesiones graves o
mortales.
Instruction Manual
Manual de instrucciones