Stihl FG 2 Instruction Manual
Stihl FG 2 Manual
 |
View all Stihl FG 2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Stihl FG 2 manual content summary:
- Stihl FG 2 | Instruction Manual - Page 1
STIHL FG 2 64PL001 Lƒ Gebrauchsanleitung Instruction Manual Notice d'emploi Instrucciones de servicio Istruzioni d'uso Instruções de serviço Handleiding - Stihl FG 2 | Instruction Manual - Page 2
G Instruction Manual 13 - 24 E Instrucciones de servicio 37 - 48 - Stihl FG 2 | Instruction Manual - Page 3
; paper can be recycled. BA_SE_145_001_01_01.fm Contents Guide to Using this Manual 14 Safety Precautions 15 Application 15 Mounting the Tool 16 Selecting and Fitting File 17 Setting Up 17 Adjustments 18 Sharpening 20 Main Parts 24 STIHl FG 2 English Dear Customer, Thank you for choosing - Stihl FG 2 | Instruction Manual - Page 4
English Guide to Using this Manual Pictograms All the pictograms attached to the machine are shown and explained in this manual. The operating and handling instructions are supported by illustrations. Symbols in text The individual steps or procedures described in the manual may be marked in - Stihl FG 2 | Instruction Manual - Page 5
observed while operating the filing tool. Read the instruction manual carefully and keep it manual and the instruction manual of the saw model on which the filing tool is mounted can help reduce the risk of injury and damage to the tool and saw. The STIHL filing tool can be used to sharpen all STIHL - Stihl FG 2 | Instruction Manual - Page 6
564BA000 KN 564BA001 KN 564BA002 KN English Mounting the Tool A 7 8 5 9 1 B 3 : Position the filing frame (7) on the swivel arm (8) so that the stop pin 4 4 engages the slot. : Tighten down the through the center hole from above. : Fit and tighten down the wingnut (6) firmly. 16 FG 2 - Stihl FG 2 | Instruction Manual - Page 7
files. Other files have the wrong shape and cut and are unsuitable for sharpening saw chain. : Select the round file File Ø mm inch 4.0 5/32 4.0 5/32 4.0 5/32 4.8 3/16 5.2 13/64 5.5 7/32 1 2 2 : Place the selected file (1) in the filing filing all other cutters. : Use a slide caliper to find - Stihl FG 2 | Instruction Manual - Page 8
(RS) Picco Micro (PM/PMN) RCX, RMX, PMX (ripping chain) Filing Angle 30 ° 30 ° 30 ° 30 ° 10 ° : To rotate guide, lift it clear of the teeth. 564BA005 KN 564BA006 KN 564BA007 KN Turn in illustration B, reset the file, adjust angle. 1 : Swing the filing frame upwards. : Loosen the nut (1). 18 - Stihl FG 2 | Instruction Manual - Page 9
(3) below the center of the nut (1). 1/10 ø Aligning the Filing Frame 564BA008 KN : Set the filing angle (2) - to sharpen the left-hand row of cutters, turn the guide to the right (clockwise). : Tighten down the nut. 1 : Position the round file (1) between the side plate and depth gauge of the - Stihl FG 2 | Instruction Manual - Page 10
turn the knurled nut a little further until the side plate presses against the file and the stop bar (6) lifts about 0.1 to 0.2 mm away from the in position. Sharpen the master cutter with 2 to 3 firm strokes of the file, from the inside to the outside of the side plate. : After sharpening, the - Stihl FG 2 | Instruction Manual - Page 11
". : Swing the filing frame upwards and : Reset the file. loosen the nut (1). : Swing the filing frame down. 3 : Position the round file between the side plate been sharpened. : Lift the guide clear of the teeth and turn it to the same filing angle on the opposite side. : Tighten down the nut - Stihl FG 2 | Instruction Manual - Page 12
filing angle on the guide to 0°. : Fit triangular file (special accessory) in place of the round file. : Pull chain along until a depth gauge is under the file this setting. : Place the selected filing gauge on the chain. If the depth gauge projects above the filing gauge, it has to be lowered. - Stihl FG 2 | Instruction Manual - Page 13
filed back to the required height (flush with the gauge). Then remove the filing gauge and file down all depth gauges to the same setting. : Place the filing . Oil 564BA024 KN 564BA026 KN : Finish off by filing the slope by hand, parallel to the service mark (see arrow) - take care not to lower - Stihl FG 2 | Instruction Manual - Page 14
English Main Parts 1 2 3 4 5 6 7 8 9 12 10 11 13 14 24 564BA022 KN 564BA021 KN 1 Adjusting screw 2 Guide 3 Filing frame 4 Stop rail 5 Nut 6 File 7 Clamping lever 8 Knurled nut 9 Stop 10 Chain rest 11 Base plate 12 Lock nut 13 Wingnut 14 Screw FG 2 - Stihl FG 2 | Instruction Manual - Page 15
Para su seguridad 39 Uso previsto 39 Montar la máquina 40 Elegir, montar la lima 41 Preparación 41 Ajuste 42 Afilado 44 Componentes importantes 48 STIHl FG 2 español Estimados clientes: Muchas gracias por haber depositado su confianza en un producto de calidad de la empresa - Stihl FG 2 | Instruction Manual - Page 16
* están disponibles como accesorios especiales en la tienda de su distribuidor STIHL. Perfeccionamiento técnico STIHL trabaja constantemente en el desarrollo de todos sus motoimplementos. Nos reservamos el base de los datos y las ilustraciones incluidos en estas instrucciones de servicio. 38 FG 2 - Stihl FG 2 | Instruction Manual - Page 17
va a montar la afiladora puede evitar lesiones y daños en la máquina. Con la limadora STIHL pueden afilarse todas las cadenas STIHL Oilomatic excepto las cadenas con filo de arista (RSL, RSLF y RSLH) y las cadenas de metal la lima - No limar los eslabones de unión o los eslabones motrices. FG 2 39 - Stihl FG 2 | Instruction Manual - Page 18
4 = pivotes tienen que estar alojados en los taladros Pasar el 5 = tornillo hexagonal desde arriba a través del taladro central Apretar firmemente la 6 = tuerca de mariposa 40 FG 2 - Stihl FG 2 | Instruction Manual - Page 19
la longitud de todos los demás dientes de corte de la cadena. : Con un pie de rey, determinar el diente más corto y marcarlo p. ej. con tiza. FG 2 41 - Stihl FG 2 | Instruction Manual - Page 20
ón B, girar el caballete de afilado, modificar el tensado de la lima y ajustar el ángulo. 1 : Girar el bastidor de afilado hacia arriba Aflojar la 1 = tuerca 42 FG 2 - Stihl FG 2 | Instruction Manual - Page 21
lima baja; giro hacia la derecha - la lima sube), hasta que la lima sobresalga aprox. 1/10 de su diámetro sobre el techo del diente FG 2 43 - Stihl FG 2 | Instruction Manual - Page 22
tope De no ser así, reajustar un poco el 3 = tope y colocar la cadena correspondientemente - volver a controlar la posición del tope 564BA012 KN 564BA013 KN 44 FG 2 - Stihl FG 2 | Instruction Manual - Page 23
bastidor de afilado hacia abajo : Poner la lima redonda entre la cara de ataque y el limitador de profundidad del primer diente de la segunda fila FG 2 45 - Stihl FG 2 | Instruction Manual - Page 24
de profundidad sobresale del calibre, habrá que repasarlo Ajustar el 3 = tope, de manera que la 2 = lima no toque el filo de corte 564BA019 KN 46 FG 2 - Stihl FG 2 | Instruction Manual - Page 25
de profundidad : Untar con regularidad la pieza de guía con aceite Girar un poco la lima en intervalos regulares, a fin de evitar un desgaste unilateral. FG 2 español 47 - Stihl FG 2 | Instruction Manual - Page 26
6 = Lima de afilar 7 = Palanca tensora 8 = Tuerca moleteada 9 = Tope 10= Caballete de afilado 11= Placa giratoria 12= Tuerca de retención 13= Tuerca de mariposa 14= Tornillo FG 2 - Stihl FG 2 | Instruction Manual - Page 27
0458 564 7721 MF
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
 |
 |
564PL001 Lƒ
STIHL FG 2
Gebrauchsanleitung
Instruction Manual
Notice d’emploi
Instrucciones de servicio
Istruzioni d’uso
Instruções de serviço
Handleiding